From: "José Roberto de Souza" <jose.souza@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Subject: [PATCH 7/8] drm/i915: Remove unused VLV/CHV PSR registers
Date: Thu, 21 Mar 2019 11:01:42 -0700 [thread overview]
Message-ID: <20190321180143.22519-7-jose.souza@intel.com> (raw)
In-Reply-To: <20190321180143.22519-1-jose.souza@intel.com>
PSR support for VLV and CHV was dropped in commit ce3508fd2a77
("drm/i915/psr: Nuke PSR support for VLV and CHV") so no need to keep
this registers around.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 36 ---------------------------------
1 file changed, 36 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 3c382aee2fec..a10475b0e336 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4209,42 +4209,6 @@ enum {
#define PIPESRC(trans) _MMIO_TRANS2(trans, _PIPEASRC)
#define PIPE_MULT(trans) _MMIO_TRANS2(trans, _PIPE_MULT_A)
-/* VLV eDP PSR registers */
-#define _PSRCTLA (VLV_DISPLAY_BASE + 0x60090)
-#define _PSRCTLB (VLV_DISPLAY_BASE + 0x61090)
-#define VLV_EDP_PSR_ENABLE (1 << 0)
-#define VLV_EDP_PSR_RESET (1 << 1)
-#define VLV_EDP_PSR_MODE_MASK (7 << 2)
-#define VLV_EDP_PSR_MODE_HW_TIMER (1 << 3)
-#define VLV_EDP_PSR_MODE_SW_TIMER (1 << 2)
-#define VLV_EDP_PSR_SINGLE_FRAME_UPDATE (1 << 7)
-#define VLV_EDP_PSR_ACTIVE_ENTRY (1 << 8)
-#define VLV_EDP_PSR_SRC_TRANSMITTER_STATE (1 << 9)
-#define VLV_EDP_PSR_DBL_FRAME (1 << 10)
-#define VLV_EDP_PSR_FRAME_COUNT_MASK (0xff << 16)
-#define VLV_EDP_PSR_IDLE_FRAME_SHIFT 16
-#define VLV_PSRCTL(pipe) _MMIO_PIPE(pipe, _PSRCTLA, _PSRCTLB)
-
-#define _VSCSDPA (VLV_DISPLAY_BASE + 0x600a0)
-#define _VSCSDPB (VLV_DISPLAY_BASE + 0x610a0)
-#define VLV_EDP_PSR_SDP_FREQ_MASK (3 << 30)
-#define VLV_EDP_PSR_SDP_FREQ_ONCE (1 << 31)
-#define VLV_EDP_PSR_SDP_FREQ_EVFRAME (1 << 30)
-#define VLV_VSCSDP(pipe) _MMIO_PIPE(pipe, _VSCSDPA, _VSCSDPB)
-
-#define _PSRSTATA (VLV_DISPLAY_BASE + 0x60094)
-#define _PSRSTATB (VLV_DISPLAY_BASE + 0x61094)
-#define VLV_EDP_PSR_LAST_STATE_MASK (7 << 3)
-#define VLV_EDP_PSR_CURR_STATE_MASK 7
-#define VLV_EDP_PSR_DISABLED (0 << 0)
-#define VLV_EDP_PSR_INACTIVE (1 << 0)
-#define VLV_EDP_PSR_IN_TRANS_TO_ACTIVE (2 << 0)
-#define VLV_EDP_PSR_ACTIVE_NORFB_UP (3 << 0)
-#define VLV_EDP_PSR_ACTIVE_SF_UPDATE (4 << 0)
-#define VLV_EDP_PSR_EXIT (5 << 0)
-#define VLV_EDP_PSR_IN_TRANS (1 << 7)
-#define VLV_PSRSTAT(pipe) _MMIO_PIPE(pipe, _PSRSTATA, _PSRSTATB)
-
/* HSW+ eDP PSR registers */
#define HSW_EDP_PSR_BASE 0x64000
#define EDP_PSR_CTL _MMIO(dev_priv->psr.mmio_base + 0x800)
--
2.21.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2019-03-21 18:01 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-21 18:01 [PATCH 1/8] drm/i915/psr: Remove partial PSR support on multiple transcoders José Roberto de Souza
2019-03-21 18:01 ` [PATCH 2/8] drm/i915: Move PSR mmio base to PSR struct José Roberto de Souza
2019-03-21 18:01 ` [PATCH 3/8] drm/i915/psr: Make all PSR register relative to mmio base José Roberto de Souza
2019-03-22 9:15 ` Jani Nikula
2019-03-22 17:27 ` Dhinakaran Pandiyan
2019-03-26 20:44 ` Souza, Jose
2019-03-21 18:01 ` [PATCH 4/8] drm/i915/psr: Make mmio base relative to transcoder offset José Roberto de Souza
2019-03-21 18:01 ` [PATCH 5/8] drm/i915/psr: Initialize PSR mutex even when sink is not reliable José Roberto de Souza
2019-03-21 18:01 ` [PATCH 6/8] drm/i915/psr: Do not enable PSR in interlaced mode for all GENs José Roberto de Souza
2019-03-21 18:01 ` José Roberto de Souza [this message]
2019-03-21 18:01 ` [PATCH 8/8] drm/i915/bdw+: Move misc display IRQ handling to it own function José Roberto de Souza
2019-03-21 18:20 ` [PATCH 1/8] drm/i915/psr: Remove partial PSR support on multiple transcoders Ville Syrjälä
2019-03-21 21:54 ` ✗ Fi.CI.CHECKPATCH: warning for series starting with [1/8] " Patchwork
2019-03-21 21:58 ` ✗ Fi.CI.SPARSE: " Patchwork
2019-03-21 22:24 ` ✓ Fi.CI.BAT: success " Patchwork
2019-03-22 16:14 ` ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190321180143.22519-7-jose.souza@intel.com \
--to=jose.souza@intel.com \
--cc=dhinakaran.pandiyan@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.