From: Charles Keepax <ckeepax@opensource.cirrus.com> To: <jdelvare@suse.com>, <linux@roeck-us.net>, <robh+dt@kernel.org>, <mark.rutland@arm.com> Cc: <linux-hwmon@vger.kernel.org>, <corbet@lwn.net>, <devicetree@vger.kernel.org>, <patches@opensource.cirrus.com> Subject: [PATCH v2 1/2] hwmon: lochnagar: Add device tree binding document Date: Mon, 25 Mar 2019 11:00:19 +0000 [thread overview] Message-ID: <20190325110020.4349-1-ckeepax@opensource.cirrus.com> (raw) Lochnagar is an evaluation and development board for Cirrus Logic Smart CODEC and Amp devices. It allows the connection of most Cirrus Logic devices on mini-cards, as well as allowing connection of various application processor systems to provide a full evaluation platform. This driver supports the board controller chip on the Lochnagar board. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> --- .../devicetree/bindings/hwmon/cirrus,lochnagar.txt | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt diff --git a/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt new file mode 100644 index 0000000000000..ffb79ccf51ee3 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt @@ -0,0 +1,26 @@ +Cirrus Logic Lochnagar Audio Development Board + +Lochnagar is an evaluation and development board for Cirrus Logic +Smart CODEC and Amp devices. It allows the connection of most Cirrus +Logic devices on mini-cards, as well as allowing connection of +various application processor systems to provide a full evaluation +platform. Audio system topology, clocking and power can all be +controlled through the Lochnagar, allowing the device under test +to be used in a variety of possible use cases. + +This binding document describes the binding for the hardware monitor +portion of the driver. + +This binding must be part of the Lochnagar MFD binding: + [4] ../mfd/cirrus,lochnagar.txt + +Required properties: + + - compatible : One of the following strings: + "cirrus,lochnagar2-hwmon" + +Example: + +lochnagar-hwmon { + compatible = "cirrus,lochnagar2-hwmon"; +}; -- 2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Charles Keepax <ckeepax@opensource.cirrus.com> To: jdelvare@suse.com, linux@roeck-us.net, robh+dt@kernel.org, mark.rutland@arm.com Cc: linux-hwmon@vger.kernel.org, corbet@lwn.net, devicetree@vger.kernel.org, patches@opensource.cirrus.com Subject: [PATCH v2 1/2] hwmon: lochnagar: Add device tree binding document Date: Mon, 25 Mar 2019 11:00:19 +0000 [thread overview] Message-ID: <20190325110020.4349-1-ckeepax@opensource.cirrus.com> (raw) Lochnagar is an evaluation and development board for Cirrus Logic Smart CODEC and Amp devices. It allows the connection of most Cirrus Logic devices on mini-cards, as well as allowing connection of various application processor systems to provide a full evaluation platform. This driver supports the board controller chip on the Lochnagar board. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> --- .../devicetree/bindings/hwmon/cirrus,lochnagar.txt | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt diff --git a/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt new file mode 100644 index 0000000000000..ffb79ccf51ee3 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt @@ -0,0 +1,26 @@ +Cirrus Logic Lochnagar Audio Development Board + +Lochnagar is an evaluation and development board for Cirrus Logic +Smart CODEC and Amp devices. It allows the connection of most Cirrus +Logic devices on mini-cards, as well as allowing connection of +various application processor systems to provide a full evaluation +platform. Audio system topology, clocking and power can all be +controlled through the Lochnagar, allowing the device under test +to be used in a variety of possible use cases. + +This binding document describes the binding for the hardware monitor +portion of the driver. + +This binding must be part of the Lochnagar MFD binding: + [4] ../mfd/cirrus,lochnagar.txt + +Required properties: + + - compatible : One of the following strings: + "cirrus,lochnagar2-hwmon" + +Example: + +lochnagar-hwmon { + compatible = "cirrus,lochnagar2-hwmon"; +}; -- 2.11.0
next reply other threads:[~2019-03-25 11:00 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-03-25 11:00 Charles Keepax [this message] 2019-03-25 11:00 ` [PATCH v2 1/2] hwmon: lochnagar: Add device tree binding document Charles Keepax 2019-03-25 11:00 ` [PATCH v2 2/2] hwmon: lochnagar: Add Lochnagar 2 hardware monitoring driver Charles Keepax 2019-03-25 11:00 ` Charles Keepax 2019-03-25 11:17 ` Guenter Roeck 2019-03-25 13:16 ` Charles Keepax 2019-03-25 13:16 ` Charles Keepax 2019-03-25 16:46 ` Guenter Roeck 2019-03-25 17:10 ` Charles Keepax 2019-03-25 17:10 ` Charles Keepax 2019-03-25 18:47 ` Guenter Roeck 2019-03-26 10:05 ` Charles Keepax 2019-03-26 10:05 ` Charles Keepax 2019-03-26 13:31 ` Guenter Roeck
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190325110020.4349-1-ckeepax@opensource.cirrus.com \ --to=ckeepax@opensource.cirrus.com \ --cc=corbet@lwn.net \ --cc=devicetree@vger.kernel.org \ --cc=jdelvare@suse.com \ --cc=linux-hwmon@vger.kernel.org \ --cc=linux@roeck-us.net \ --cc=mark.rutland@arm.com \ --cc=patches@opensource.cirrus.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.