All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH] [media] wl128x: prevent two potential buffer overflows
@ 2019-03-26  5:12 ` Dan Carpenter
  0 siblings, 0 replies; 2+ messages in thread
From: Dan Carpenter @ 2019-03-26  5:12 UTC (permalink / raw)
  To: Mauro Carvalho Chehab, Manjunatha Halli
  Cc: Hans Verkuil, linux-media, kernel-janitors

Smatch marks skb->data as untrusted so it warns that "evt_hdr->dlen"
can copy up to 255 bytes and we only have room for two bytes.  Even
if this comes from the firmware and we trust it, the new policy
generally is just to fix it as kernel hardenning.

I can't test this code so I tried to be very conservative.  I considered
not allowing "evt_hdr->dlen == 1" because it doesn't initialize the
whole variable but in the end I decided to allow it and manually
initialized "asic_id" and "asic_ver" to zero.

Fixes: e8454ff7b9a4 ("[media] drivers:media:radio: wl128x: FM Driver Common sources")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
---
 drivers/media/radio/wl128x/fmdrv_common.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/media/radio/wl128x/fmdrv_common.c b/drivers/media/radio/wl128x/fmdrv_common.c
index 1614809f7d35..a1fcb80a2191 100644
--- a/drivers/media/radio/wl128x/fmdrv_common.c
+++ b/drivers/media/radio/wl128x/fmdrv_common.c
@@ -489,7 +489,8 @@ int fmc_send_cmd(struct fmdev *fmdev, u8 fm_op, u16 type, void *payload,
 		return -EIO;
 	}
 	/* Send response data to caller */
-	if (response != NULL && response_len != NULL && evt_hdr->dlen) {
+	if (response != NULL && response_len != NULL && evt_hdr->dlen &&
+	    evt_hdr->dlen <= payload_len) {
 		/* Skip header info and copy only response data */
 		skb_pull(skb, sizeof(struct fm_event_msg_hdr));
 		memcpy(response, skb->data, evt_hdr->dlen);
@@ -583,6 +584,8 @@ static void fm_irq_handle_flag_getcmd_resp(struct fmdev *fmdev)
 		return;
 
 	fm_evt_hdr = (void *)skb->data;
+	if (fm_evt_hdr->dlen > sizeof(fmdev->irq_info.flag))
+		return;
 
 	/* Skip header info and copy only response data */
 	skb_pull(skb, sizeof(struct fm_event_msg_hdr));
@@ -1309,7 +1312,7 @@ static int load_default_rx_configuration(struct fmdev *fmdev)
 static int fm_power_up(struct fmdev *fmdev, u8 mode)
 {
 	u16 payload;
-	__be16 asic_id, asic_ver;
+	__be16 asic_id = 0, asic_ver = 0;
 	int resp_len, ret;
 	u8 fw_name[50];
 
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 2+ messages in thread

* [PATCH] [media] wl128x: prevent two potential buffer overflows
@ 2019-03-26  5:12 ` Dan Carpenter
  0 siblings, 0 replies; 2+ messages in thread
From: Dan Carpenter @ 2019-03-26  5:12 UTC (permalink / raw)
  To: Mauro Carvalho Chehab, Manjunatha Halli
  Cc: Hans Verkuil, linux-media, kernel-janitors

Smatch marks skb->data as untrusted so it warns that "evt_hdr->dlen"
can copy up to 255 bytes and we only have room for two bytes.  Even
if this comes from the firmware and we trust it, the new policy
generally is just to fix it as kernel hardenning.

I can't test this code so I tried to be very conservative.  I considered
not allowing "evt_hdr->dlen = 1" because it doesn't initialize the
whole variable but in the end I decided to allow it and manually
initialized "asic_id" and "asic_ver" to zero.

Fixes: e8454ff7b9a4 ("[media] drivers:media:radio: wl128x: FM Driver Common sources")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
---
 drivers/media/radio/wl128x/fmdrv_common.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/media/radio/wl128x/fmdrv_common.c b/drivers/media/radio/wl128x/fmdrv_common.c
index 1614809f7d35..a1fcb80a2191 100644
--- a/drivers/media/radio/wl128x/fmdrv_common.c
+++ b/drivers/media/radio/wl128x/fmdrv_common.c
@@ -489,7 +489,8 @@ int fmc_send_cmd(struct fmdev *fmdev, u8 fm_op, u16 type, void *payload,
 		return -EIO;
 	}
 	/* Send response data to caller */
-	if (response != NULL && response_len != NULL && evt_hdr->dlen) {
+	if (response != NULL && response_len != NULL && evt_hdr->dlen &&
+	    evt_hdr->dlen <= payload_len) {
 		/* Skip header info and copy only response data */
 		skb_pull(skb, sizeof(struct fm_event_msg_hdr));
 		memcpy(response, skb->data, evt_hdr->dlen);
@@ -583,6 +584,8 @@ static void fm_irq_handle_flag_getcmd_resp(struct fmdev *fmdev)
 		return;
 
 	fm_evt_hdr = (void *)skb->data;
+	if (fm_evt_hdr->dlen > sizeof(fmdev->irq_info.flag))
+		return;
 
 	/* Skip header info and copy only response data */
 	skb_pull(skb, sizeof(struct fm_event_msg_hdr));
@@ -1309,7 +1312,7 @@ static int load_default_rx_configuration(struct fmdev *fmdev)
 static int fm_power_up(struct fmdev *fmdev, u8 mode)
 {
 	u16 payload;
-	__be16 asic_id, asic_ver;
+	__be16 asic_id = 0, asic_ver = 0;
 	int resp_len, ret;
 	u8 fw_name[50];
 
-- 
2.17.1

^ permalink raw reply related	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2019-03-26  5:12 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-03-26  5:12 [PATCH] [media] wl128x: prevent two potential buffer overflows Dan Carpenter
2019-03-26  5:12 ` Dan Carpenter

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.