[PATCH AUTOSEL 3.18 01/41] i2c: sis630: correct format strings

[PATCH AUTOSEL 3.18 01/41] i2c: sis630: correct format strings

[Sasha Levin]

From: Louis Taylor <louis@kragniz.eu>

[ Upstream commit 60f7691c624b41a05bfc3493d9b0519e7951b7ef ]

When compiling with -Wformat, clang warns:

drivers/i2c/busses/i2c-sis630.c:482:4: warning: format specifies type
      'unsigned short' but the argument has type 'int' [-Wformat]
                        smbus_base + SMB_STS,
                        ^~~~~~~~~~~~~~~~~~~~

drivers/i2c/busses/i2c-sis630.c:483:4: warning: format specifies type
      'unsigned short' but the argument has type 'int' [-Wformat]
                        smbus_base + SMB_STS + SIS630_SMB_IOREGION - 1);
                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

drivers/i2c/busses/i2c-sis630.c:531:37: warning: format specifies type
      'unsigned short' but the argument has type 'int' [-Wformat]
                 "SMBus SIS630 adapter at %04hx", smbus_base + SMB_STS);
                                          ~~~~~   ^~~~~~~~~~~~~~~~~~~~

This patch fixes the format strings to use the format type for int.

Link: https://github.com/ClangBuiltLinux/linux/issues/378
Signed-off-by: Louis Taylor <louis@kragniz.eu>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-sis630.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index 1e6805b5cef2..a57aa4fe51a4 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -478,7 +478,7 @@ static int sis630_setup(struct pci_dev *sis630_dev)
 	if (!request_region(smbus_base + SMB_STS, SIS630_SMB_IOREGION,
 			    sis630_driver.name)) {
 		dev_err(&sis630_dev->dev,
-			"I/O Region 0x%04hx-0x%04hx for SMBus already in use.\n",
+			"I/O Region 0x%04x-0x%04x for SMBus already in use.\n",
 			smbus_base + SMB_STS,
 			smbus_base + SMB_STS + SIS630_SMB_IOREGION - 1);
 		retval = -EBUSY;
@@ -528,7 +528,7 @@ static int sis630_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	sis630_adapter.dev.parent = &dev->dev;
 
 	snprintf(sis630_adapter.name, sizeof(sis630_adapter.name),
-		 "SMBus SIS630 adapter at %04hx", smbus_base + SMB_STS);
+		 "SMBus SIS630 adapter at %04x", smbus_base + SMB_STS);
 
 	return i2c_add_adapter(&sis630_adapter);
 }
-- 
2.19.1

[PATCH AUTOSEL 3.18 02/41] tracing: kdb: Fix ftdump to not sleep

[Sasha Levin]

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit 31b265b3baaf55f209229888b7ffea523ddab366 ]

As reported back in 2016-11 [1], the "ftdump" kdb command triggers a
BUG for "sleeping function called from invalid context".

kdb's "ftdump" command wants to call ring_buffer_read_prepare() in
atomic context.  A very simple solution for this is to add allocation
flags to ring_buffer_read_prepare() so kdb can call it without
triggering the allocation error.  This patch does that.

Note that in the original email thread about this, it was suggested
that perhaps the solution for kdb was to either preallocate the buffer
ahead of time or create our own iterator.  I'm hoping that this
alternative of adding allocation flags to ring_buffer_read_prepare()
can be considered since it means I don't need to duplicate more of the
core trace code into "trace_kdb.c" (for either creating my own
iterator or re-preparing a ring allocator whose memory was already
allocated).

NOTE: another option for kdb is to actually figure out how to make it
reuse the existing ftrace_dump() function and totally eliminate the
duplication.  This sounds very appealing and actually works (the "sr
z" command can be seen to properly dump the ftrace buffer).  The
downside here is that ftrace_dump() fully consumes the trace buffer.
Unless that is changed I'd rather not use it because it means "ftdump
| grep xyz" won't be very useful to search the ftrace buffer since it
will throw away the whole trace on the first grep.  A future patch to
dump only the last few lines of the buffer will also be hard to
implement.

[1] https://lkml.kernel.org/r/20161117191605.GA21459@google.com

Link: http://lkml.kernel.org/r/20190308193205.213659-1-dianders@chromium.org

Reported-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/ring_buffer.h | 2 +-
 kernel/trace/ring_buffer.c  | 5 +++--
 kernel/trace/trace.c        | 6 ++++--
 kernel/trace/trace_kdb.c    | 6 ++++--
 4 files changed, 12 insertions(+), 7 deletions(-)

diff --git a/include/linux/ring_buffer.h b/include/linux/ring_buffer.h
index 4daa5069cbdb..561f79803c13 100644
--- a/include/linux/ring_buffer.h
+++ b/include/linux/ring_buffer.h
@@ -125,7 +125,7 @@ ring_buffer_consume(struct ring_buffer *buffer, int cpu, u64 *ts,
 		    unsigned long *lost_events);
 
 struct ring_buffer_iter *
-ring_buffer_read_prepare(struct ring_buffer *buffer, int cpu);
+ring_buffer_read_prepare(struct ring_buffer *buffer, int cpu, gfp_t flags);
 void ring_buffer_read_prepare_sync(void);
 void ring_buffer_read_start(struct ring_buffer_iter *iter);
 void ring_buffer_read_finish(struct ring_buffer_iter *iter);
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index d2b609412c3a..173ff025ea75 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -4039,6 +4039,7 @@ EXPORT_SYMBOL_GPL(ring_buffer_consume);
  * ring_buffer_read_prepare - Prepare for a non consuming read of the buffer
  * @buffer: The ring buffer to read from
  * @cpu: The cpu buffer to iterate over
+ * @flags: gfp flags to use for memory allocation
  *
  * This performs the initial preparations necessary to iterate
  * through the buffer.  Memory is allocated, buffer recording
@@ -4056,7 +4057,7 @@ EXPORT_SYMBOL_GPL(ring_buffer_consume);
  * This overall must be paired with ring_buffer_read_finish.
  */
 struct ring_buffer_iter *
-ring_buffer_read_prepare(struct ring_buffer *buffer, int cpu)
+ring_buffer_read_prepare(struct ring_buffer *buffer, int cpu, gfp_t flags)
 {
 	struct ring_buffer_per_cpu *cpu_buffer;
 	struct ring_buffer_iter *iter;
@@ -4064,7 +4065,7 @@ ring_buffer_read_prepare(struct ring_buffer *buffer, int cpu)
 	if (!cpumask_test_cpu(cpu, buffer->cpumask))
 		return NULL;
 
-	iter = kmalloc(sizeof(*iter), GFP_KERNEL);
+	iter = kmalloc(sizeof(*iter), flags);
 	if (!iter)
 		return NULL;
 
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 69af9a1b1031..934c1a1813dd 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -3047,7 +3047,8 @@ __tracing_open(struct inode *inode, struct file *file, bool snapshot)
 	if (iter->cpu_file == RING_BUFFER_ALL_CPUS) {
 		for_each_tracing_cpu(cpu) {
 			iter->buffer_iter[cpu] =
-				ring_buffer_read_prepare(iter->trace_buffer->buffer, cpu);
+				ring_buffer_read_prepare(iter->trace_buffer->buffer,
+							 cpu, GFP_KERNEL);
 		}
 		ring_buffer_read_prepare_sync();
 		for_each_tracing_cpu(cpu) {
@@ -3057,7 +3058,8 @@ __tracing_open(struct inode *inode, struct file *file, bool snapshot)
 	} else {
 		cpu = iter->cpu_file;
 		iter->buffer_iter[cpu] =
-			ring_buffer_read_prepare(iter->trace_buffer->buffer, cpu);
+			ring_buffer_read_prepare(iter->trace_buffer->buffer,
+						 cpu, GFP_KERNEL);
 		ring_buffer_read_prepare_sync();
 		ring_buffer_read_start(iter->buffer_iter[cpu]);
 		tracing_iter_reset(iter, cpu);
diff --git a/kernel/trace/trace_kdb.c b/kernel/trace/trace_kdb.c
index bd90e1b06088..ebbf28492573 100644
--- a/kernel/trace/trace_kdb.c
+++ b/kernel/trace/trace_kdb.c
@@ -46,14 +46,16 @@ static void ftrace_dump_buf(int skip_lines, long cpu_file)
 	if (cpu_file == RING_BUFFER_ALL_CPUS) {
 		for_each_tracing_cpu(cpu) {
 			iter.buffer_iter[cpu] =
-			ring_buffer_read_prepare(iter.trace_buffer->buffer, cpu);
+			ring_buffer_read_prepare(iter.trace_buffer->buffer,
+						 cpu, GFP_ATOMIC);
 			ring_buffer_read_start(iter.buffer_iter[cpu]);
 			tracing_iter_reset(&iter, cpu);
 		}
 	} else {
 		iter.cpu_file = cpu_file;
 		iter.buffer_iter[cpu_file] =
-			ring_buffer_read_prepare(iter.trace_buffer->buffer, cpu_file);
+			ring_buffer_read_prepare(iter.trace_buffer->buffer,
+						 cpu_file, GFP_ATOMIC);
 		ring_buffer_read_start(iter.buffer_iter[cpu_file]);
 		tracing_iter_reset(&iter, cpu_file);
 	}
-- 
2.19.1

[PATCH AUTOSEL 3.18 03/41] sysctl: handle overflow for file-max

[Sasha Levin]

From: Christian Brauner <christian@brauner.io>

[ Upstream commit 32a5ad9c22852e6bd9e74bdec5934ef9d1480bc5 ]

Currently, when writing

  echo 18446744073709551616 > /proc/sys/fs/file-max

/proc/sys/fs/file-max will overflow and be set to 0.  That quickly
crashes the system.

This commit sets the max and min value for file-max.  The max value is
set to long int.  Any higher value cannot currently be used as the
percpu counters are long ints and not unsigned integers.

Note that the file-max value is ultimately parsed via
__do_proc_doulongvec_minmax().  This function does not report error when
min or max are exceeded.  Which means if a value largen that long int is
written userspace will not receive an error instead the old value will be
kept.  There is an argument to be made that this should be changed and
__do_proc_doulongvec_minmax() should return an error when a dedicated min
or max value are exceeded.  However this has the potential to break
userspace so let's defer this to an RFC patch.

Link: http://lkml.kernel.org/r/20190107222700.15954-3-christian@brauner.io
Signed-off-by: Christian Brauner <christian@brauner.io>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Waiman Long <longman@redhat.com>
[christian@brauner.io: v4]
  Link: http://lkml.kernel.org/r/20190210203943.8227-3-christian@brauner.io
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sysctl.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 27f8aa765493..a68fed9f6922 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -125,6 +125,7 @@ static int __maybe_unused one = 1;
 static int __maybe_unused two = 2;
 static int __maybe_unused four = 4;
 static unsigned long one_ul = 1;
+static unsigned long long_max = LONG_MAX;
 static int one_hundred = 100;
 #ifdef CONFIG_PRINTK
 static int ten_thousand = 10000;
@@ -1521,6 +1522,8 @@ static struct ctl_table fs_table[] = {
 		.maxlen		= sizeof(files_stat.max_files),
 		.mode		= 0644,
 		.proc_handler	= proc_doulongvec_minmax,
+		.extra1		= &zero,
+		.extra2		= &long_max,
 	},
 	{
 		.procname	= "nr_open",
-- 
2.19.1

[PATCH AUTOSEL 3.18 04/41] mm/cma.c: cma_declare_contiguous: correct err handling

[Sasha Levin]

From: Peng Fan <peng.fan@nxp.com>

[ Upstream commit 0d3bd18a5efd66097ef58622b898d3139790aa9d ]

In case cma_init_reserved_mem failed, need to free the memblock
allocated by memblock_reserve or memblock_alloc_range.

Quote Catalin's comments:
  https://lkml.org/lkml/2019/2/26/482

Kmemleak is supposed to work with the memblock_{alloc,free} pair and it
ignores the memblock_reserve() as a memblock_alloc() implementation
detail. It is, however, tolerant to memblock_free() being called on
a sub-range or just a different range from a previous memblock_alloc().
So the original patch looks fine to me. FWIW:

Link: http://lkml.kernel.org/r/20190227144631.16708-1-peng.fan@nxp.com
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/cma.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/mm/cma.c b/mm/cma.c
index 7d266e393c44..1f4a7e076a5c 100644
--- a/mm/cma.c
+++ b/mm/cma.c
@@ -340,12 +340,14 @@ int __init cma_declare_contiguous(phys_addr_t base,
 
 	ret = cma_init_reserved_mem(base, size, order_per_bit, res_cma);
 	if (ret)
-		goto err;
+		goto free_mem;
 
 	pr_info("Reserved %ld MiB at %pa\n", (unsigned long)size / SZ_1M,
 		&base);
 	return 0;
 
+free_mem:
+	memblock_free(base, size);
 err:
 	pr_err("Failed to reserve %ld MiB\n", (unsigned long)size / SZ_1M);
 	return ret;
-- 
2.19.1

[PATCH AUTOSEL 3.18 05/41] mm/vmalloc.c: fix kernel BUG at mm/vmalloc.c:512!

[Sasha Levin]

From: "Uladzislau Rezki (Sony)" <urezki@gmail.com>

[ Upstream commit afd07389d3f4933c7f7817a92fb5e053d59a3182 ]

One of the vmalloc stress test case triggers the kernel BUG():

  <snip>
  [60.562151] ------------[ cut here ]------------
  [60.562154] kernel BUG at mm/vmalloc.c:512!
  [60.562206] invalid opcode: 0000 [#1] PREEMPT SMP PTI
  [60.562247] CPU: 0 PID: 430 Comm: vmalloc_test/0 Not tainted 4.20.0+ #161
  [60.562293] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
  [60.562351] RIP: 0010:alloc_vmap_area+0x36f/0x390
  <snip>

it can happen due to big align request resulting in overflowing of
calculated address, i.e.  it becomes 0 after ALIGN()'s fixup.

Fix it by checking if calculated address is within vstart/vend range.

Link: http://lkml.kernel.org/r/20190124115648.9433-2-urezki@gmail.com
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/vmalloc.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 33920fc41d6b..fbb00e0d4c56 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -439,7 +439,11 @@ static struct vmap_area *alloc_vmap_area(unsigned long size,
 	}
 
 found:
-	if (addr + size > vend)
+	/*
+	 * Check also calculated address against the vstart,
+	 * because it can be 0 because of big align request.
+	 */
+	if (addr + size > vend || addr < vstart)
 		goto overflow;
 
 	va->va_start = addr;
-- 
2.19.1

[PATCH AUTOSEL 3.18 06/41] mm/slab.c: kmemleak no scan alien caches

[Sasha Levin]

From: Qian Cai <cai@lca.pw>

[ Upstream commit 92d1d07daad65c300c7d0b68bbef8867e9895d54 ]

Kmemleak throws endless warnings during boot due to in
__alloc_alien_cache(),

    alc = kmalloc_node(memsize, gfp, node);
    init_arraycache(&alc->ac, entries, batch);
    kmemleak_no_scan(ac);

Kmemleak does not track the array cache (alc->ac) but the alien cache
(alc) instead, so let it track the latter by lifting kmemleak_no_scan()
out of init_arraycache().

There is another place that calls init_arraycache(), but
alloc_kmem_cache_cpus() uses the percpu allocation where will never be
considered as a leak.

  kmemleak: Found object by alias at 0xffff8007b9aa7e38
  CPU: 190 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc2+ #2
  Call trace:
   dump_backtrace+0x0/0x168
   show_stack+0x24/0x30
   dump_stack+0x88/0xb0
   lookup_object+0x84/0xac
   find_and_get_object+0x84/0xe4
   kmemleak_no_scan+0x74/0xf4
   setup_kmem_cache_node+0x2b4/0x35c
   __do_tune_cpucache+0x250/0x2d4
   do_tune_cpucache+0x4c/0xe4
   enable_cpucache+0xc8/0x110
   setup_cpu_cache+0x40/0x1b8
   __kmem_cache_create+0x240/0x358
   create_cache+0xc0/0x198
   kmem_cache_create_usercopy+0x158/0x20c
   kmem_cache_create+0x50/0x64
   fsnotify_init+0x58/0x6c
   do_one_initcall+0x194/0x388
   kernel_init_freeable+0x668/0x688
   kernel_init+0x18/0x124
   ret_from_fork+0x10/0x18
  kmemleak: Object 0xffff8007b9aa7e00 (size 256):
  kmemleak:   comm "swapper/0", pid 1, jiffies 4294697137
  kmemleak:   min_count = 1
  kmemleak:   count = 0
  kmemleak:   flags = 0x1
  kmemleak:   checksum = 0
  kmemleak:   backtrace:
       kmemleak_alloc+0x84/0xb8
       kmem_cache_alloc_node_trace+0x31c/0x3a0
       __kmalloc_node+0x58/0x78
       setup_kmem_cache_node+0x26c/0x35c
       __do_tune_cpucache+0x250/0x2d4
       do_tune_cpucache+0x4c/0xe4
       enable_cpucache+0xc8/0x110
       setup_cpu_cache+0x40/0x1b8
       __kmem_cache_create+0x240/0x358
       create_cache+0xc0/0x198
       kmem_cache_create_usercopy+0x158/0x20c
       kmem_cache_create+0x50/0x64
       fsnotify_init+0x58/0x6c
       do_one_initcall+0x194/0x388
       kernel_init_freeable+0x668/0x688
       kernel_init+0x18/0x124
  kmemleak: Not scanning unknown object at 0xffff8007b9aa7e38
  CPU: 190 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc2+ #2
  Call trace:
   dump_backtrace+0x0/0x168
   show_stack+0x24/0x30
   dump_stack+0x88/0xb0
   kmemleak_no_scan+0x90/0xf4
   setup_kmem_cache_node+0x2b4/0x35c
   __do_tune_cpucache+0x250/0x2d4
   do_tune_cpucache+0x4c/0xe4
   enable_cpucache+0xc8/0x110
   setup_cpu_cache+0x40/0x1b8
   __kmem_cache_create+0x240/0x358
   create_cache+0xc0/0x198
   kmem_cache_create_usercopy+0x158/0x20c
   kmem_cache_create+0x50/0x64
   fsnotify_init+0x58/0x6c
   do_one_initcall+0x194/0x388
   kernel_init_freeable+0x668/0x688
   kernel_init+0x18/0x124
   ret_from_fork+0x10/0x18

Link: http://lkml.kernel.org/r/20190129184518.39808-1-cai@lca.pw
Fixes: 1fe00d50a9e8 ("slab: factor out initialization of array cache")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/slab.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/mm/slab.c b/mm/slab.c
index 208b24a4d423..f29925d7a52e 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -659,14 +659,6 @@ static void start_cpu_timer(int cpu)
 
 static void init_arraycache(struct array_cache *ac, int limit, int batch)
 {
-	/*
-	 * The array_cache structures contain pointers to free object.
-	 * However, when such objects are allocated or transferred to another
-	 * cache the pointers are not cleared and they could be counted as
-	 * valid references during a kmemleak scan. Therefore, kmemleak must
-	 * not scan such objects.
-	 */
-	kmemleak_no_scan(ac);
 	if (ac) {
 		ac->avail = 0;
 		ac->limit = limit;
@@ -682,6 +674,14 @@ static struct array_cache *alloc_arraycache(int node, int entries,
 	struct array_cache *ac = NULL;
 
 	ac = kmalloc_node(memsize, gfp, node);
+	/*
+	 * The array_cache structures contain pointers to free object.
+	 * However, when such objects are allocated or transferred to another
+	 * cache the pointers are not cleared and they could be counted as
+	 * valid references during a kmemleak scan. Therefore, kmemleak must
+	 * not scan such objects.
+	 */
+	kmemleak_no_scan(ac);
 	init_arraycache(ac, entries, batchcount);
 	return ac;
 }
@@ -870,6 +870,7 @@ static struct alien_cache *__alloc_alien_cache(int node, int entries,
 
 	alc = kmalloc_node(memsize, gfp, node);
 	if (alc) {
+		kmemleak_no_scan(alc);
 		init_arraycache(&alc->ac, entries, batch);
 		spin_lock_init(&alc->lock);
 	}
-- 
2.19.1

[PATCH AUTOSEL 3.18 07/41] ocfs2: fix a panic problem caused by o2cb_ctl

[Sasha Levin]

From: Jia Guo <guojia12@huawei.com>

[ Upstream commit cc725ef3cb202ef2019a3c67c8913efa05c3cce6 ]

In the process of creating a node, it will cause NULL pointer
dereference in kernel if o2cb_ctl failed in the interval (mkdir,
o2cb_set_node_attribute(node_num)] in function o2cb_add_node.

The node num is initialized to 0 in function o2nm_node_group_make_item,
o2nm_node_group_drop_item will mistake the node number 0 for a valid
node number when we delete the node before the node number is set
correctly.  If the local node number of the current host happens to be
0, cluster->cl_local_node will be set to O2NM_INVALID_NODE_NUM while
o2hb_thread still running.  The panic stack is generated as follows:

  o2hb_thread
      \-o2hb_do_disk_heartbeat
          \-o2hb_check_own_slot
              |-slot = &reg->hr_slots[o2nm_this_node()];
              //o2nm_this_node() return O2NM_INVALID_NODE_NUM

We need to check whether the node number is set when we delete the node.

Link: http://lkml.kernel.org/r/133d8045-72cc-863e-8eae-5013f9f6bc51@huawei.com
Signed-off-by: Jia Guo <guojia12@huawei.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Acked-by: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ocfs2/cluster/nodemanager.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/fs/ocfs2/cluster/nodemanager.c b/fs/ocfs2/cluster/nodemanager.c
index 441c84e169e6..059414bb19dc 100644
--- a/fs/ocfs2/cluster/nodemanager.c
+++ b/fs/ocfs2/cluster/nodemanager.c
@@ -721,13 +721,15 @@ static void o2nm_node_group_drop_item(struct config_group *group,
 	struct o2nm_node *node = to_o2nm_node(item);
 	struct o2nm_cluster *cluster = to_o2nm_cluster(group->cg_item.ci_parent);
 
-	o2net_disconnect_node(node);
+	if (cluster->cl_nodes[node->nd_num] == node) {
+		o2net_disconnect_node(node);
 
-	if (cluster->cl_has_local &&
-	    (cluster->cl_local_node == node->nd_num)) {
-		cluster->cl_has_local = 0;
-		cluster->cl_local_node = O2NM_INVALID_NODE_NUM;
-		o2net_stop_listening(node);
+		if (cluster->cl_has_local &&
+		    (cluster->cl_local_node == node->nd_num)) {
+			cluster->cl_has_local = 0;
+			cluster->cl_local_node = O2NM_INVALID_NODE_NUM;
+			o2net_stop_listening(node);
+		}
 	}
 
 	/* XXX call into net to stop this node from trading messages */
-- 
2.19.1

[PATCH AUTOSEL 3.18 08/41] cifs: use correct format characters

[Sasha Levin]

From: Louis Taylor <louis@kragniz.eu>

[ Upstream commit 259594bea574e515a148171b5cd84ce5cbdc028a ]

When compiling with -Wformat, clang emits the following warnings:

fs/cifs/smb1ops.c:312:20: warning: format specifies type 'unsigned
short' but the argument has type 'unsigned int' [-Wformat]
                         tgt_total_cnt, total_in_tgt);
                                        ^~~~~~~~~~~~

fs/cifs/cifs_dfs_ref.c:289:4: warning: format specifies type 'short'
but the argument has type 'int' [-Wformat]
                 ref->flags, ref->server_type);
                 ^~~~~~~~~~

fs/cifs/cifs_dfs_ref.c:289:16: warning: format specifies type 'short'
but the argument has type 'int' [-Wformat]
                 ref->flags, ref->server_type);
                             ^~~~~~~~~~~~~~~~

fs/cifs/cifs_dfs_ref.c:291:4: warning: format specifies type 'short'
but the argument has type 'int' [-Wformat]
                 ref->ref_flag, ref->path_consumed);
                 ^~~~~~~~~~~~~

fs/cifs/cifs_dfs_ref.c:291:19: warning: format specifies type 'short'
but the argument has type 'int' [-Wformat]
                 ref->ref_flag, ref->path_consumed);
                                ^~~~~~~~~~~~~~~~~~
The types of these arguments are unconditionally defined, so this patch
updates the format character to the correct ones for ints and unsigned
ints.

Link: https://github.com/ClangBuiltLinux/linux/issues/378

Signed-off-by: Louis Taylor <louis@kragniz.eu>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/cifs_dfs_ref.c | 4 ++--
 fs/cifs/smb1ops.c      | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index b8602f199815..71263ea90810 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -265,9 +265,9 @@ static void dump_referral(const struct dfs_info3_param *ref)
 {
 	cifs_dbg(FYI, "DFS: ref path: %s\n", ref->path_name);
 	cifs_dbg(FYI, "DFS: node path: %s\n", ref->node_name);
-	cifs_dbg(FYI, "DFS: fl: %hd, srv_type: %hd\n",
+	cifs_dbg(FYI, "DFS: fl: %d, srv_type: %d\n",
 		 ref->flags, ref->server_type);
-	cifs_dbg(FYI, "DFS: ref_flags: %hd, path_consumed: %hd\n",
+	cifs_dbg(FYI, "DFS: ref_flags: %d, path_consumed: %d\n",
 		 ref->ref_flag, ref->path_consumed);
 }
 
diff --git a/fs/cifs/smb1ops.c b/fs/cifs/smb1ops.c
index b0f973b2b189..2a43aa6d8e87 100644
--- a/fs/cifs/smb1ops.c
+++ b/fs/cifs/smb1ops.c
@@ -305,7 +305,7 @@ coalesce_t2(char *second_buf, struct smb_hdr *target_hdr)
 	remaining = tgt_total_cnt - total_in_tgt;
 
 	if (remaining < 0) {
-		cifs_dbg(FYI, "Server sent too much data. tgt_total_cnt=%hu total_in_tgt=%hu\n",
+		cifs_dbg(FYI, "Server sent too much data. tgt_total_cnt=%hu total_in_tgt=%u\n",
 			 tgt_total_cnt, total_in_tgt);
 		return -EPROTO;
 	}
-- 
2.19.1

[PATCH AUTOSEL 3.18 09/41] dm thin: add sanity checks to thin-pool and external snapshot creation

[Sasha Levin]

From: "Jason Cai (Xiang Feng)" <jason.cai.kern@gmail.com>

[ Upstream commit 70de2cbda8a5d788284469e755f8b097d339c240 ]

Invoking dm_get_device() twice on the same device path with different
modes is dangerous.  Because in that case, upgrade_mode() will alloc a
new 'dm_dev' and free the old one, which may be referenced by a previous
caller.  Dereferencing the dangling pointer will trigger kernel NULL
pointer dereference.

The following two cases can reproduce this issue.  Actually, they are
invalid setups that must be disallowed, e.g.:

1. Creating a thin-pool with read_only mode, and the same device as
both metadata and data.

dmsetup create thinp --table \
    "0 41943040 thin-pool /dev/vdb /dev/vdb 128 0 1 read_only"

BUG: unable to handle kernel NULL pointer dereference at 0000000000000080
...
Call Trace:
 new_read+0xfb/0x110 [dm_bufio]
 dm_bm_read_lock+0x43/0x190 [dm_persistent_data]
 ? kmem_cache_alloc_trace+0x15c/0x1e0
 __create_persistent_data_objects+0x65/0x3e0 [dm_thin_pool]
 dm_pool_metadata_open+0x8c/0xf0 [dm_thin_pool]
 pool_ctr.cold.79+0x213/0x913 [dm_thin_pool]
 ? realloc_argv+0x50/0x70 [dm_mod]
 dm_table_add_target+0x14e/0x330 [dm_mod]
 table_load+0x122/0x2e0 [dm_mod]
 ? dev_status+0x40/0x40 [dm_mod]
 ctl_ioctl+0x1aa/0x3e0 [dm_mod]
 dm_ctl_ioctl+0xa/0x10 [dm_mod]
 do_vfs_ioctl+0xa2/0x600
 ? handle_mm_fault+0xda/0x200
 ? __do_page_fault+0x26c/0x4f0
 ksys_ioctl+0x60/0x90
 __x64_sys_ioctl+0x16/0x20
 do_syscall_64+0x55/0x150
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

2. Creating a external snapshot using the same thin-pool device.

dmsetup create thinp --table \
    "0 41943040 thin-pool /dev/vdc /dev/vdb 128 0 2 ignore_discard"
dmsetup message /dev/mapper/thinp 0 "create_thin 0"
dmsetup create snap --table \
            "0 204800 thin /dev/mapper/thinp 0 /dev/mapper/thinp"

BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
...
Call Trace:
? __alloc_pages_nodemask+0x13c/0x2e0
retrieve_status+0xa5/0x1f0 [dm_mod]
? dm_get_live_or_inactive_table.isra.7+0x20/0x20 [dm_mod]
 table_status+0x61/0xa0 [dm_mod]
 ctl_ioctl+0x1aa/0x3e0 [dm_mod]
 dm_ctl_ioctl+0xa/0x10 [dm_mod]
 do_vfs_ioctl+0xa2/0x600
 ksys_ioctl+0x60/0x90
 ? ksys_write+0x4f/0xb0
 __x64_sys_ioctl+0x16/0x20
 do_syscall_64+0x55/0x150
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Jason Cai (Xiang Feng) <jason.cai@linux.alibaba.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm-thin.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c
index 936c57b57539..c50f144bdbcf 100644
--- a/drivers/md/dm-thin.c
+++ b/drivers/md/dm-thin.c
@@ -2560,6 +2560,13 @@ static int pool_ctr(struct dm_target *ti, unsigned argc, char **argv)
 	as.argc = argc;
 	as.argv = argv;
 
+	/* make sure metadata and data are different devices */
+	if (!strcmp(argv[0], argv[1])) {
+		ti->error = "Error setting metadata or data device";
+		r = -EINVAL;
+		goto out_unlock;
+	}
+
 	/*
 	 * Set default pool features.
 	 */
@@ -3386,6 +3393,12 @@ static int thin_ctr(struct dm_target *ti, unsigned argc, char **argv)
 	tc->sort_bio_list = RB_ROOT;
 
 	if (argc == 3) {
+		if (!strcmp(argv[0], argv[2])) {
+			ti->error = "Error setting origin device";
+			r = -EINVAL;
+			goto bad_origin_dev;
+		}
+
 		r = dm_get_device(ti, argv[2], FMODE_READ, &origin_dev);
 		if (r) {
 			ti->error = "Error opening origin device";
-- 
2.19.1

[PATCH AUTOSEL 3.18 10/41] cifs: Fix NULL pointer dereference of devname

[Sasha Levin]

From: Yao Liu <yotta.liu@ucloud.cn>

[ Upstream commit 68e2672f8fbd1e04982b8d2798dd318bf2515dd2 ]

There is a NULL pointer dereference of devname in strspn()

The oops looks something like:

  CIFS: Attempting to mount (null)
  BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
  ...
  RIP: 0010:strspn+0x0/0x50
  ...
  Call Trace:
   ? cifs_parse_mount_options+0x222/0x1710 [cifs]
   ? cifs_get_volume_info+0x2f/0x80 [cifs]
   cifs_setup_volume_info+0x20/0x190 [cifs]
   cifs_get_volume_info+0x50/0x80 [cifs]
   cifs_smb3_do_mount+0x59/0x630 [cifs]
   ? ida_alloc_range+0x34b/0x3d0
   cifs_do_mount+0x11/0x20 [cifs]
   mount_fs+0x52/0x170
   vfs_kern_mount+0x6b/0x170
   do_mount+0x216/0xdc0
   ksys_mount+0x83/0xd0
   __x64_sys_mount+0x25/0x30
   do_syscall_64+0x65/0x220
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fix this by adding a NULL check on devname in cifs_parse_devname()

Signed-off-by: Yao Liu <yotta.liu@ucloud.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/connect.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 7d4c2bf2fea2..f5f5aab3457f 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1186,6 +1186,11 @@ cifs_parse_devname(const char *devname, struct smb_vol *vol)
 	const char *delims = "/\\";
 	size_t len;
 
+	if (unlikely(!devname || !*devname)) {
+		cifs_dbg(VFS, "Device name not specified.\n");
+		return -EINVAL;
+	}
+
 	/* make sure we have a valid UNC double delimiter prefix */
 	len = strspn(devname, delims);
 	if (len != 2)
-- 
2.19.1

[PATCH AUTOSEL 3.18 11/41] fs: fix guard_bio_eod to check for real EOD errors

[Sasha Levin]

From: Carlos Maiolino <cmaiolino@redhat.com>

[ Upstream commit dce30ca9e3b676fb288c33c1f4725a0621361185 ]

guard_bio_eod() can truncate a segment in bio to allow it to do IO on
odd last sectors of a device.

It already checks if the IO starts past EOD, but it does not consider
the possibility of an IO request starting within device boundaries can
contain more than one segment past EOD.

In such cases, truncated_bytes can be bigger than PAGE_SIZE, and will
underflow bvec->bv_len.

Fix this by checking if truncated_bytes is lower than PAGE_SIZE.

This situation has been found on filesystems such as isofs and vfat,
which doesn't check the device size before mount, if the device is
smaller than the filesystem itself, a readahead on such filesystem,
which spans EOD, can trigger this situation, leading a call to
zero_user() with a wrong size possibly corrupting memory.

I didn't see any crash, or didn't let the system run long enough to
check if memory corruption will be hit somewhere, but adding
instrumentation to guard_bio_end() to check truncated_bytes size, was
enough to see the error.

The following script can trigger the error.

MNT=/mnt
IMG=./DISK.img
DEV=/dev/loop0

mkfs.vfat $IMG
mount $IMG $MNT
cp -R /etc $MNT &> /dev/null
umount $MNT

losetup -D

losetup --find --show --sizelimit 16247280 $IMG
mount $DEV $MNT

find $MNT -type f -exec cat {} + >/dev/null

Kudos to Eric Sandeen for coming up with the reproducer above

Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/buffer.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/fs/buffer.c b/fs/buffer.c
index 20805db2c987..47b42e8ddca2 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -2986,6 +2986,13 @@ void guard_bio_eod(int rw, struct bio *bio)
 	/* Uhhuh. We've got a bio that straddles the device size! */
 	truncated_bytes = bio->bi_iter.bi_size - (maxsector << 9);
 
+	/*
+	 * The bio contains more than one segment which spans EOD, just return
+	 * and let IO layer turn it into an EIO
+	 */
+	if (truncated_bytes > bvec->bv_len)
+		return;
+
 	/* Truncate the bio.. */
 	bio->bi_iter.bi_size -= truncated_bytes;
 	bvec->bv_len -= truncated_bytes;
-- 
2.19.1

[PATCH AUTOSEL 3.18 12/41] tools lib traceevent: Fix buffer overflow in arg_eval

[Sasha Levin]

From: Tony Jones <tonyj@suse.de>

[ Upstream commit 7c5b019e3a638a5a290b0ec020f6ca83d2ec2aaa ]

Fix buffer overflow observed when running perf test.

The overflow is when trying to evaluate "1ULL << (64 - 1)" which is
resulting in -9223372036854775808 which overflows the 20 character
buffer.

If is possible this bug has been reported before but I still don't see
any fix checked in:

See: https://www.spinics.net/lists/linux-perf-users/msg07714.html

Reported-by: Michael Sartain <mikesart@fastmail.com>
Reported-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Tony Jones <tonyj@suse.de>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Fixes: f7d82350e597 ("tools/events: Add files to create libtraceevent.a")
Link: http://lkml.kernel.org/r/20190228015532.8941-1-tonyj@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/traceevent/event-parse.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c
index 0c81ca7d18cd..84374e313e3f 100644
--- a/tools/lib/traceevent/event-parse.c
+++ b/tools/lib/traceevent/event-parse.c
@@ -2283,7 +2283,7 @@ static int arg_num_eval(struct print_arg *arg, long long *val)
 static char *arg_eval (struct print_arg *arg)
 {
 	long long val;
-	static char buf[20];
+	static char buf[24];
 
 	switch (arg->type) {
 	case PRINT_ATOM:
-- 
2.19.1

[PATCH AUTOSEL 3.18 13/41] scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c

[Sasha Levin]

From: Benjamin Block <bblock@linux.ibm.com>

[ Upstream commit 1749ef00f7312679f76d5e9104c5d1e22a829038 ]

We had a test-report where, under memory pressure, adding LUNs to the
systems would fail (the tests add LUNs strictly in sequence):

[ 5525.853432] scsi 0:0:1:1088045124: Direct-Access     IBM      2107900          .148 PQ: 0 ANSI: 5
[ 5525.853826] scsi 0:0:1:1088045124: alua: supports implicit TPGS
[ 5525.853830] scsi 0:0:1:1088045124: alua: device naa.6005076303ffd32700000000000044da port group 0 rel port 43
[ 5525.853931] sd 0:0:1:1088045124: Attached scsi generic sg10 type 0
[ 5525.854075] sd 0:0:1:1088045124: [sdk] Disabling DIF Type 1 protection
[ 5525.855495] sd 0:0:1:1088045124: [sdk] 2097152 512-byte logical blocks: (1.07 GB/1.00 GiB)
[ 5525.855606] sd 0:0:1:1088045124: [sdk] Write Protect is off
[ 5525.855609] sd 0:0:1:1088045124: [sdk] Mode Sense: ed 00 00 08
[ 5525.855795] sd 0:0:1:1088045124: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5525.857838]  sdk: sdk1
[ 5525.859468] sd 0:0:1:1088045124: [sdk] Attached SCSI disk
[ 5525.865073] sd 0:0:1:1088045124: alua: transition timeout set to 60 seconds
[ 5525.865078] sd 0:0:1:1088045124: alua: port group 00 state A preferred supports tolusnA
[ 5526.015070] sd 0:0:1:1088045124: alua: port group 00 state A preferred supports tolusnA
[ 5526.015213] sd 0:0:1:1088045124: alua: port group 00 state A preferred supports tolusnA
[ 5526.587439] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured
[ 5526.588562] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured

Looking at the code of scsi_alloc_sdev(), and all the calling contexts,
there seems to be no reason to use GFP_ATMOIC here. All the different
call-contexts use a mutex at some point, and nothing in between that
requires no sleeping, as far as I could see. Additionally, the code that
later allocates the block queue for the device (scsi_mq_alloc_queue())
already uses GFP_KERNEL.

There are similar allocations in two other functions:
scsi_probe_and_add_lun(), and scsi_add_lun(),; that can also be done with
GFP_KERNEL.

Here is the contexts for the three functions so far:

    scsi_alloc_sdev()
        scsi_probe_and_add_lun()
            scsi_sequential_lun_scan()
                __scsi_scan_target()
                    scsi_scan_target()
                        mutex_lock()
                    scsi_scan_channel()
                        scsi_scan_host_selected()
                            mutex_lock()
            scsi_report_lun_scan()
                __scsi_scan_target()
    	            ...
            __scsi_add_device()
                mutex_lock()
            __scsi_scan_target()
                ...
        scsi_report_lun_scan()
            ...
        scsi_get_host_dev()
            mutex_lock()

    scsi_probe_and_add_lun()
        ...

    scsi_add_lun()
        scsi_probe_and_add_lun()
            ...

So replace all these, and give them a bit of a better chance to succeed,
with more chances of reclaim.

Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_scan.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 3386e72ba7e4..156ee22462e6 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -229,7 +229,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
 	extern void scsi_requeue_run_queue(struct work_struct *work);
 
 	sdev = kzalloc(sizeof(*sdev) + shost->transportt->device_size,
-		       GFP_ATOMIC);
+		       GFP_KERNEL);
 	if (!sdev)
 		goto out;
 
@@ -791,7 +791,7 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
 	 */
 	sdev->inquiry = kmemdup(inq_result,
 				max_t(size_t, sdev->inquiry_len, 36),
-				GFP_ATOMIC);
+				GFP_KERNEL);
 	if (sdev->inquiry == NULL)
 		return SCSI_SCAN_NO_RESPONSE;
 
@@ -1083,7 +1083,7 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget,
 	if (!sdev)
 		goto out;
 
-	result = kmalloc(result_len, GFP_ATOMIC |
+	result = kmalloc(result_len, GFP_KERNEL |
 			((shost->unchecked_isa_dma) ? __GFP_DMA : 0));
 	if (!result)
 		goto out_free_sdev;
-- 
2.19.1

[PATCH AUTOSEL 3.18 14/41] ARM: 8840/1: use a raw_spinlock_t in unwind

[Sasha Levin]

From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

[ Upstream commit 74ffe79ae538283bbf7c155e62339f1e5c87b55a ]

Mostly unwind is done with irqs enabled however SLUB may call it with
irqs disabled while creating a new SLUB cache.

I had system freeze while loading a module which called
kmem_cache_create() on init. That means SLUB's __slab_alloc() disabled
interrupts and then

->new_slab_objects()
 ->new_slab()
  ->setup_object()
   ->setup_object_debug()
    ->init_tracking()
     ->set_track()
      ->save_stack_trace()
       ->save_stack_trace_tsk()
        ->walk_stackframe()
         ->unwind_frame()
          ->unwind_find_idx()
           =>spin_lock_irqsave(&unwind_lock);

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/kernel/unwind.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index cbb85c5fabf9..5184fe85d167 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -93,7 +93,7 @@ extern const struct unwind_idx __start_unwind_idx[];
 static const struct unwind_idx *__origin_unwind_idx;
 extern const struct unwind_idx __stop_unwind_idx[];
 
-static DEFINE_SPINLOCK(unwind_lock);
+static DEFINE_RAW_SPINLOCK(unwind_lock);
 static LIST_HEAD(unwind_tables);
 
 /* Convert a prel31 symbol to an absolute address */
@@ -201,7 +201,7 @@ static const struct unwind_idx *unwind_find_idx(unsigned long addr)
 		/* module unwind tables */
 		struct unwind_table *table;
 
-		spin_lock_irqsave(&unwind_lock, flags);
+		raw_spin_lock_irqsave(&unwind_lock, flags);
 		list_for_each_entry(table, &unwind_tables, list) {
 			if (addr >= table->begin_addr &&
 			    addr < table->end_addr) {
@@ -213,7 +213,7 @@ static const struct unwind_idx *unwind_find_idx(unsigned long addr)
 				break;
 			}
 		}
-		spin_unlock_irqrestore(&unwind_lock, flags);
+		raw_spin_unlock_irqrestore(&unwind_lock, flags);
 	}
 
 	pr_debug("%s: idx = %p\n", __func__, idx);
@@ -530,9 +530,9 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size,
 	tab->begin_addr = text_addr;
 	tab->end_addr = text_addr + text_size;
 
-	spin_lock_irqsave(&unwind_lock, flags);
+	raw_spin_lock_irqsave(&unwind_lock, flags);
 	list_add_tail(&tab->list, &unwind_tables);
-	spin_unlock_irqrestore(&unwind_lock, flags);
+	raw_spin_unlock_irqrestore(&unwind_lock, flags);
 
 	return tab;
 }
@@ -544,9 +544,9 @@ void unwind_table_del(struct unwind_table *tab)
 	if (!tab)
 		return;
 
-	spin_lock_irqsave(&unwind_lock, flags);
+	raw_spin_lock_irqsave(&unwind_lock, flags);
 	list_del(&tab->list);
-	spin_unlock_irqrestore(&unwind_lock, flags);
+	raw_spin_unlock_irqrestore(&unwind_lock, flags);
 
 	kfree(tab);
 }
-- 
2.19.1

[PATCH AUTOSEL 3.18 15/41] mmc: omap: fix the maximum timeout setting

[Sasha Levin]

From: Aaro Koskinen <aaro.koskinen@iki.fi>

[ Upstream commit a6327b5e57fdc679c842588c3be046c0b39cc127 ]

When running OMAP1 kernel on QEMU, MMC access is annoyingly noisy:

	MMC: CTO of 0xff and 0xfe cannot be used!
	MMC: CTO of 0xff and 0xfe cannot be used!
	MMC: CTO of 0xff and 0xfe cannot be used!
	[ad inf.]

Emulator warnings appear to be valid. The TI document SPRU680 [1]
("OMAP5910 Dual-Core Processor MultiMedia Card/Secure Data Memory Card
(MMC/SD) Reference Guide") page 36 states that the maximum timeout is 253
cycles and "0xff and 0xfe cannot be used".

Fix by using 0xfd as the maximum timeout.

Tested using QEMU 2.5 (Siemens SX1 machine, OMAP310), and also checked on
real hardware using Palm TE (OMAP310), Nokia 770 (OMAP1710) and Nokia N810
(OMAP2420) that MMC works as before.

[1] http://www.ti.com/lit/ug/spru680/spru680.pdf

Fixes: 730c9b7e6630f ("[MMC] Add OMAP MMC host driver")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/omap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 11e5bfedab70..b9f4f39f9359 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -921,7 +921,7 @@ static inline void set_cmd_timeout(struct mmc_omap_host *host, struct mmc_reques
 	reg &= ~(1 << 5);
 	OMAP_MMC_WRITE(host, SDIO, reg);
 	/* Set maximum timeout */
-	OMAP_MMC_WRITE(host, CTO, 0xff);
+	OMAP_MMC_WRITE(host, CTO, 0xfd);
 }
 
 static inline void set_data_timeout(struct mmc_omap_host *host, struct mmc_request *req)
-- 
2.19.1

[PATCH AUTOSEL 3.18 16/41] e1000e: Fix -Wformat-truncation warnings

[Sasha Levin]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 135e7245479addc6b1f5d031e3d7e2ddb3d2b109 ]

Provide precision hints to snprintf() since we know the destination
buffer size of the RX/TX ring names are IFNAMSIZ + 5 - 1. This fixes the
following warnings:

drivers/net/ethernet/intel/e1000e/netdev.c: In function
'e1000_request_msix':
drivers/net/ethernet/intel/e1000e/netdev.c:2109:13: warning: 'snprintf'
output may be truncated before the last format character
[-Wformat-truncation=]
     "%s-rx-0", netdev->name);
             ^
drivers/net/ethernet/intel/e1000e/netdev.c:2107:3: note: 'snprintf'
output between 6 and 21 bytes into a destination of size 20
   snprintf(adapter->rx_ring->name,
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
     sizeof(adapter->rx_ring->name) - 1,
     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
     "%s-rx-0", netdev->name);
     ~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/intel/e1000e/netdev.c:2125:13: warning: 'snprintf'
output may be truncated before the last format character
[-Wformat-truncation=]
     "%s-tx-0", netdev->name);
             ^
drivers/net/ethernet/intel/e1000e/netdev.c:2123:3: note: 'snprintf'
output between 6 and 21 bytes into a destination of size 20
   snprintf(adapter->tx_ring->name,
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
     sizeof(adapter->tx_ring->name) - 1,
     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
     "%s-tx-0", netdev->name);
     ~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 0beeebdc0c01..ef5699103ec2 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -2132,7 +2132,7 @@ static int e1000_request_msix(struct e1000_adapter *adapter)
 	if (strlen(netdev->name) < (IFNAMSIZ - 5))
 		snprintf(adapter->rx_ring->name,
 			 sizeof(adapter->rx_ring->name) - 1,
-			 "%s-rx-0", netdev->name);
+			 "%.14s-rx-0", netdev->name);
 	else
 		memcpy(adapter->rx_ring->name, netdev->name, IFNAMSIZ);
 	err = request_irq(adapter->msix_entries[vector].vector,
@@ -2148,7 +2148,7 @@ static int e1000_request_msix(struct e1000_adapter *adapter)
 	if (strlen(netdev->name) < (IFNAMSIZ - 5))
 		snprintf(adapter->tx_ring->name,
 			 sizeof(adapter->tx_ring->name) - 1,
-			 "%s-tx-0", netdev->name);
+			 "%.14s-tx-0", netdev->name);
 	else
 		memcpy(adapter->tx_ring->name, netdev->name, IFNAMSIZ);
 	err = request_irq(adapter->msix_entries[vector].vector,
-- 
2.19.1

[PATCH AUTOSEL 3.18 17/41] IB/mlx4: Increase the timeout for CM cache

[Sasha Levin]

From: Håkon Bugge <haakon.bugge@oracle.com>

[ Upstream commit 2612d723aadcf8281f9bf8305657129bd9f3cd57 ]

Using CX-3 virtual functions, either from a bare-metal machine or
pass-through from a VM, MAD packets are proxied through the PF driver.

Since the VF drivers have separate name spaces for MAD Transaction Ids
(TIDs), the PF driver has to re-map the TIDs and keep the book keeping
in a cache.

Following the RDMA Connection Manager (CM) protocol, it is clear when
an entry has to evicted form the cache. But life is not perfect,
remote peers may die or be rebooted. Hence, it's a timeout to wipe out
a cache entry, when the PF driver assumes the remote peer has gone.

During workloads where a high number of QPs are destroyed concurrently,
excessive amount of CM DREQ retries has been observed

The problem can be demonstrated in a bare-metal environment, where two
nodes have instantiated 8 VFs each. This using dual ported HCAs, so we
have 16 vPorts per physical server.

64 processes are associated with each vPort and creates and destroys
one QP for each of the remote 64 processes. That is, 1024 QPs per
vPort, all in all 16K QPs. The QPs are created/destroyed using the
CM.

When tearing down these 16K QPs, excessive CM DREQ retries (and
duplicates) are observed. With some cat/paste/awk wizardry on the
infiniband_cm sysfs, we observe as sum of the 16 vPorts on one of the
nodes:

cm_rx_duplicates:
      dreq  2102
cm_rx_msgs:
      drep  1989
      dreq  6195
       rep  3968
       req  4224
       rtu  4224
cm_tx_msgs:
      drep  4093
      dreq 27568
       rep  4224
       req  3968
       rtu  3968
cm_tx_retries:
      dreq 23469

Note that the active/passive side is equally distributed between the
two nodes.

Enabling pr_debug in cm.c gives tons of:

[171778.814239] <mlx4_ib> mlx4_ib_multiplex_cm_handler: id{slave:
1,sl_cm_id: 0xd393089f} is NULL!

By increasing the CM_CLEANUP_CACHE_TIMEOUT from 5 to 30 seconds, the
tear-down phase of the application is reduced from approximately 90 to
50 seconds. Retries/duplicates are also significantly reduced:

cm_rx_duplicates:
      dreq  2460
[]
cm_tx_retries:
      dreq  3010
       req    47

Increasing the timeout further didn't help, as these duplicates and
retries stems from a too short CMA timeout, which was 20 (~4 seconds)
on the systems. By increasing the CMA timeout to 22 (~17 seconds), the
numbers fell down to about 10 for both of them.

Adjustment of the CMA timeout is not part of this commit.

Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Acked-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/mlx4/cm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/mlx4/cm.c b/drivers/infiniband/hw/mlx4/cm.c
index 56a593e0ae5d..2aedbd18ffbc 100644
--- a/drivers/infiniband/hw/mlx4/cm.c
+++ b/drivers/infiniband/hw/mlx4/cm.c
@@ -39,7 +39,7 @@
 
 #include "mlx4_ib.h"
 
-#define CM_CLEANUP_CACHE_TIMEOUT  (5 * HZ)
+#define CM_CLEANUP_CACHE_TIMEOUT  (30 * HZ)
 
 struct id_map_entry {
 	struct rb_node node;
-- 
2.19.1

[PATCH AUTOSEL 3.18 18/41] scsi: megaraid_sas: return error when create DMA pool failed

[Sasha Levin]

From: Jason Yan <yanaijie@huawei.com>

[ Upstream commit bcf3b67d16a4c8ffae0aa79de5853435e683945c ]

when create DMA pool for cmd frames failed, we should return -ENOMEM,
instead of 0.
In some case in:

    megasas_init_adapter_fusion()

    -->megasas_alloc_cmds()
       -->megasas_create_frame_pool
          create DMA pool failed,
        --> megasas_free_cmds() [1]

    -->megasas_alloc_cmds_fusion()
       failed, then goto fail_alloc_cmds.
    -->megasas_free_cmds() [2]

we will call megasas_free_cmds twice, [1] will kfree cmd_list,
[2] will use cmd_list.it will cause a problem:

Unable to handle kernel NULL pointer dereference at virtual address
00000000
pgd = ffffffc000f70000
[00000000] *pgd=0000001fbf893003, *pud=0000001fbf893003,
*pmd=0000001fbf894003, *pte=006000006d000707
Internal error: Oops: 96000005 [#1] SMP
 Modules linked in:
 CPU: 18 PID: 1 Comm: swapper/0 Not tainted
 task: ffffffdfb9290000 ti: ffffffdfb923c000 task.ti: ffffffdfb923c000
 PC is at megasas_free_cmds+0x30/0x70
 LR is at megasas_free_cmds+0x24/0x70
 ...
 Call trace:
 [<ffffffc0005b779c>] megasas_free_cmds+0x30/0x70
 [<ffffffc0005bca74>] megasas_init_adapter_fusion+0x2f4/0x4d8
 [<ffffffc0005b926c>] megasas_init_fw+0x2dc/0x760
 [<ffffffc0005b9ab0>] megasas_probe_one+0x3c0/0xcd8
 [<ffffffc0004a5abc>] local_pci_probe+0x4c/0xb4
 [<ffffffc0004a5c40>] pci_device_probe+0x11c/0x14c
 [<ffffffc00053a5e4>] driver_probe_device+0x1ec/0x430
 [<ffffffc00053a92c>] __driver_attach+0xa8/0xb0
 [<ffffffc000538178>] bus_for_each_dev+0x74/0xc8
  [<ffffffc000539e88>] driver_attach+0x28/0x34
 [<ffffffc000539a18>] bus_add_driver+0x16c/0x248
 [<ffffffc00053b234>] driver_register+0x6c/0x138
 [<ffffffc0004a5350>] __pci_register_driver+0x5c/0x6c
 [<ffffffc000ce3868>] megasas_init+0xc0/0x1a8
 [<ffffffc000082a58>] do_one_initcall+0xe8/0x1ec
 [<ffffffc000ca7be8>] kernel_init_freeable+0x1c8/0x284
 [<ffffffc0008d90b8>] kernel_init+0x1c/0xe4

Signed-off-by: Jason Yan <yanaijie@huawei.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/megaraid/megaraid_sas_base.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 1ff0ece87644..24cc8786ff06 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -3743,6 +3743,7 @@ int megasas_alloc_cmds(struct megasas_instance *instance)
 	if (megasas_create_frame_pool(instance)) {
 		printk(KERN_DEBUG "megasas: Error creating frame DMA pool\n");
 		megasas_free_cmds(instance);
+		return -ENOMEM;
 	}
 
 	return 0;
-- 
2.19.1

[PATCH AUTOSEL 3.18 19/41] SoC: imx-sgtl5000: add missing put_device()

[Sasha Levin]

From: Wen Yang <yellowriver2010@hotmail.com>

[ Upstream commit 8fa857da9744f513036df1c43ab57f338941ae7d ]

The of_find_device_by_node() takes a reference to the underlying device
structure, we should release that reference.

Detected by coccinelle with the following warnings:
./sound/soc/fsl/imx-sgtl5000.c:169:1-7: ERROR: missing put_device;
call of_find_device_by_node on line 105, but without a corresponding
object release within this function.
./sound/soc/fsl/imx-sgtl5000.c:177:1-7: ERROR: missing put_device;
call of_find_device_by_node on line 105, but without a corresponding
object release within this function.

Signed-off-by: Wen Yang <yellowriver2010@hotmail.com>
Cc: Timur Tabi <timur@kernel.org>
Cc: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: Xiubo Li <Xiubo.Lee@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: alsa-devel@alsa-project.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/fsl/imx-sgtl5000.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/fsl/imx-sgtl5000.c b/sound/soc/fsl/imx-sgtl5000.c
index 1cb22dd034eb..110f3cf361af 100644
--- a/sound/soc/fsl/imx-sgtl5000.c
+++ b/sound/soc/fsl/imx-sgtl5000.c
@@ -115,6 +115,7 @@ static int imx_sgtl5000_probe(struct platform_device *pdev)
 		ret = -EPROBE_DEFER;
 		goto fail;
 	}
+	put_device(&ssi_pdev->dev);
 	codec_dev = of_find_i2c_device_by_node(codec_np);
 	if (!codec_dev) {
 		dev_err(&pdev->dev, "failed to find codec platform device\n");
-- 
2.19.1

[PATCH AUTOSEL 3.18 19/41] SoC: imx-sgtl5000: add missing put_device()

[Sasha Levin]

From: Wen Yang <yellowriver2010@hotmail.com>

[ Upstream commit 8fa857da9744f513036df1c43ab57f338941ae7d ]

The of_find_device_by_node() takes a reference to the underlying device
structure, we should release that reference.

Detected by coccinelle with the following warnings:
./sound/soc/fsl/imx-sgtl5000.c:169:1-7: ERROR: missing put_device;
call of_find_device_by_node on line 105, but without a corresponding
object release within this function.
./sound/soc/fsl/imx-sgtl5000.c:177:1-7: ERROR: missing put_device;
call of_find_device_by_node on line 105, but without a corresponding
object release within this function.

Signed-off-by: Wen Yang <yellowriver2010@hotmail.com>
Cc: Timur Tabi <timur@kernel.org>
Cc: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: Xiubo Li <Xiubo.Lee@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: alsa-devel@alsa-project.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/fsl/imx-sgtl5000.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/fsl/imx-sgtl5000.c b/sound/soc/fsl/imx-sgtl5000.c
index 1cb22dd034eb..110f3cf361af 100644
--- a/sound/soc/fsl/imx-sgtl5000.c
+++ b/sound/soc/fsl/imx-sgtl5000.c
@@ -115,6 +115,7 @@ static int imx_sgtl5000_probe(struct platform_device *pdev)
 		ret = -EPROBE_DEFER;
 		goto fail;
 	}
+	put_device(&ssi_pdev->dev);
 	codec_dev = of_find_i2c_device_by_node(codec_np);
 	if (!codec_dev) {
 		dev_err(&pdev->dev, "failed to find codec platform device\n");
-- 
2.19.1

[PATCH AUTOSEL 3.18 19/41] SoC: imx-sgtl5000: add missing put_device()

[Sasha Levin]

From: Wen Yang <yellowriver2010@hotmail.com>

[ Upstream commit 8fa857da9744f513036df1c43ab57f338941ae7d ]

The of_find_device_by_node() takes a reference to the underlying device
structure, we should release that reference.

Detected by coccinelle with the following warnings:
./sound/soc/fsl/imx-sgtl5000.c:169:1-7: ERROR: missing put_device;
call of_find_device_by_node on line 105, but without a corresponding
object release within this function.
./sound/soc/fsl/imx-sgtl5000.c:177:1-7: ERROR: missing put_device;
call of_find_device_by_node on line 105, but without a corresponding
object release within this function.

Signed-off-by: Wen Yang <yellowriver2010@hotmail.com>
Cc: Timur Tabi <timur@kernel.org>
Cc: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: Xiubo Li <Xiubo.Lee@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: alsa-devel@alsa-project.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/fsl/imx-sgtl5000.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/fsl/imx-sgtl5000.c b/sound/soc/fsl/imx-sgtl5000.c
index 1cb22dd034eb..110f3cf361af 100644
--- a/sound/soc/fsl/imx-sgtl5000.c
+++ b/sound/soc/fsl/imx-sgtl5000.c
@@ -115,6 +115,7 @@ static int imx_sgtl5000_probe(struct platform_device *pdev)
 		ret = -EPROBE_DEFER;
 		goto fail;
 	}
+	put_device(&ssi_pdev->dev);
 	codec_dev = of_find_i2c_device_by_node(codec_np);
 	if (!codec_dev) {
 		dev_err(&pdev->dev, "failed to find codec platform device\n");
-- 
2.19.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 3.18 20/41] leds: lp55xx: fix null deref on firmware load failure

[Sasha Levin]

From: Michal Kazior <michal@plume.com>

[ Upstream commit 5ddb0869bfc1bca6cfc592c74c64a026f936638c ]

I've stumbled upon a kernel crash and the logs
pointed me towards the lp5562 driver:

> <4>[306013.841294] lp5562 0-0030: Direct firmware load for lp5562 failed with error -2
> <4>[306013.894990] lp5562 0-0030: Falling back to user helper
> ...
> <3>[306073.924886] lp5562 0-0030: firmware request failed
> <1>[306073.939456] Unable to handle kernel NULL pointer dereference at virtual address 00000000
> <4>[306074.251011] PC is at _raw_spin_lock+0x1c/0x58
> <4>[306074.255539] LR is at release_firmware+0x6c/0x138
> ...

After taking a look I noticed firmware_release()
could be called with either NULL or a dangling
pointer.

Fixes: 10c06d178df11 ("leds-lp55xx: support firmware interface")
Signed-off-by: Michal Kazior <michal@plume.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/leds/leds-lp55xx-common.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/leds/leds-lp55xx-common.c b/drivers/leds/leds-lp55xx-common.c
index 77c26bc32eed..a038f1128446 100644
--- a/drivers/leds/leds-lp55xx-common.c
+++ b/drivers/leds/leds-lp55xx-common.c
@@ -200,7 +200,7 @@ static void lp55xx_firmware_loaded(const struct firmware *fw, void *context)
 
 	if (!fw) {
 		dev_err(dev, "firmware request failed\n");
-		goto out;
+		return;
 	}
 
 	/* handling firmware data is chip dependent */
@@ -213,9 +213,9 @@ static void lp55xx_firmware_loaded(const struct firmware *fw, void *context)
 
 	mutex_unlock(&chip->lock);
 
-out:
 	/* firmware should be released for other channel use */
 	release_firmware(chip->fw);
+	chip->fw = NULL;
 }
 
 static int lp55xx_request_firmware(struct lp55xx_chip *chip)
-- 
2.19.1

[PATCH AUTOSEL 3.18 21/41] kprobes: Prohibit probing on bsearch()

[Sasha Levin]

From: Andrea Righi <righi.andrea@gmail.com>

[ Upstream commit 02106f883cd745523f7766d90a739f983f19e650 ]

Since kprobe breakpoing handler is using bsearch(), probing on this
routine can cause recursive breakpoint problem.

int3
 ->do_int3()
   ->ftrace_int3_handler()
     ->ftrace_location()
       ->ftrace_location_range()
         ->bsearch() -> int3

Prohibit probing on bsearch().

Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/154998813406.31052.8791425358974650922.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/bsearch.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/lib/bsearch.c b/lib/bsearch.c
index e33c179089db..d50048446b77 100644
--- a/lib/bsearch.c
+++ b/lib/bsearch.c
@@ -11,6 +11,7 @@
 
 #include <linux/export.h>
 #include <linux/bsearch.h>
+#include <linux/kprobes.h>
 
 /*
  * bsearch - binary search an array of elements
@@ -51,3 +52,4 @@ void *bsearch(const void *key, const void *base, size_t num, size_t size,
 	return NULL;
 }
 EXPORT_SYMBOL(bsearch);
+NOKPROBE_SYMBOL(bsearch);
-- 
2.19.1

[PATCH AUTOSEL 3.18 22/41] ARM: 8833/1: Ensure that NEON code always compiles with Clang

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit de9c0d49d85dc563549972edc5589d195cd5e859 ]

While building arm32 allyesconfig, I ran into the following errors:

  arch/arm/lib/xor-neon.c:17:2: error: You should compile this file with
  '-mfloat-abi=softfp -mfpu=neon'

  In file included from lib/raid6/neon1.c:27:
  /home/nathan/cbl/prebuilt/lib/clang/8.0.0/include/arm_neon.h:28:2:
  error: "NEON support not enabled"

Building V=1 showed NEON_FLAGS getting passed along to Clang but
__ARM_NEON__ was not getting defined. Ultimately, it boils down to Clang
only defining __ARM_NEON__ when targeting armv7, rather than armv6k,
which is the '-march' value for allyesconfig.

>From lib/Basic/Targets/ARM.cpp in the Clang source:

  // This only gets set when Neon instructions are actually available, unlike
  // the VFP define, hence the soft float and arch check. This is subtly
  // different from gcc, we follow the intent which was that it should be set
  // when Neon instructions are actually available.
  if ((FPU & NeonFPU) && !SoftFloat && ArchVersion >= 7) {
    Builder.defineMacro("__ARM_NEON", "1");
    Builder.defineMacro("__ARM_NEON__");
    // current AArch32 NEON implementations do not support double-precision
    // floating-point even when it is present in VFP.
    Builder.defineMacro("__ARM_NEON_FP",
                        "0x" + Twine::utohexstr(HW_FP & ~HW_FP_DP));
  }

Ard Biesheuvel recommended explicitly adding '-march=armv7-a' at the
beginning of the NEON_FLAGS definitions so that __ARM_NEON__ always gets
definined by Clang. This doesn't functionally change anything because
that code will only run where NEON is supported, which is implicitly
armv7.

Link: https://github.com/ClangBuiltLinux/linux/issues/287

Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/arm/kernel_mode_neon.txt | 4 ++--
 arch/arm/lib/Makefile                  | 2 +-
 arch/arm/lib/xor-neon.c                | 2 +-
 lib/raid6/Makefile                     | 2 +-
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/Documentation/arm/kernel_mode_neon.txt b/Documentation/arm/kernel_mode_neon.txt
index 525452726d31..b9e060c5b61e 100644
--- a/Documentation/arm/kernel_mode_neon.txt
+++ b/Documentation/arm/kernel_mode_neon.txt
@@ -6,7 +6,7 @@ TL;DR summary
 * Use only NEON instructions, or VFP instructions that don't rely on support
   code
 * Isolate your NEON code in a separate compilation unit, and compile it with
-  '-mfpu=neon -mfloat-abi=softfp'
+  '-march=armv7-a -mfpu=neon -mfloat-abi=softfp'
 * Put kernel_neon_begin() and kernel_neon_end() calls around the calls into your
   NEON code
 * Don't sleep in your NEON code, and be aware that it will be executed with
@@ -87,7 +87,7 @@ instructions appearing in unexpected places if no special care is taken.
 Therefore, the recommended and only supported way of using NEON/VFP in the
 kernel is by adhering to the following rules:
 * isolate the NEON code in a separate compilation unit and compile it with
-  '-mfpu=neon -mfloat-abi=softfp';
+  '-march=armv7-a -mfpu=neon -mfloat-abi=softfp';
 * issue the calls to kernel_neon_begin(), kernel_neon_end() as well as the calls
   into the unit containing the NEON code from a compilation unit which is *not*
   built with the GCC flag '-mfpu=neon' set.
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 0573faab96ad..830b2ddcc346 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -46,7 +46,7 @@ $(obj)/csumpartialcopy.o:	$(obj)/csumpartialcopygeneric.S
 $(obj)/csumpartialcopyuser.o:	$(obj)/csumpartialcopygeneric.S
 
 ifeq ($(CONFIG_KERNEL_MODE_NEON),y)
-  NEON_FLAGS			:= -mfloat-abi=softfp -mfpu=neon
+  NEON_FLAGS			:= -march=armv7-a -mfloat-abi=softfp -mfpu=neon
   CFLAGS_xor-neon.o		+= $(NEON_FLAGS)
   obj-$(CONFIG_XOR_BLOCKS)	+= xor-neon.o
 endif
diff --git a/arch/arm/lib/xor-neon.c b/arch/arm/lib/xor-neon.c
index 2c40aeab3eaa..c691b901092f 100644
--- a/arch/arm/lib/xor-neon.c
+++ b/arch/arm/lib/xor-neon.c
@@ -14,7 +14,7 @@
 MODULE_LICENSE("GPL");
 
 #ifndef __ARM_NEON__
-#error You should compile this file with '-mfloat-abi=softfp -mfpu=neon'
+#error You should compile this file with '-march=armv7-a -mfloat-abi=softfp -mfpu=neon'
 #endif
 
 /*
diff --git a/lib/raid6/Makefile b/lib/raid6/Makefile
index c7dab0645554..1c3330dc5eab 100644
--- a/lib/raid6/Makefile
+++ b/lib/raid6/Makefile
@@ -23,7 +23,7 @@ endif
 ifeq ($(CONFIG_KERNEL_MODE_NEON),y)
 NEON_FLAGS := -ffreestanding
 ifeq ($(ARCH),arm)
-NEON_FLAGS += -mfloat-abi=softfp -mfpu=neon
+NEON_FLAGS += -march=armv7-a -mfloat-abi=softfp -mfpu=neon
 endif
 ifeq ($(ARCH),arm64)
 CFLAGS_REMOVE_neon1.o += -mgeneral-regs-only
-- 
2.19.1

[PATCH AUTOSEL 3.18 23/41] ALSA: PCM: check if ops are defined before suspending PCM

[Sasha Levin]

From: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>

[ Upstream commit d9c0b2afe820fa3b3f8258a659daee2cc71ca3ef ]

BE dai links only have internal PCM's and their substream ops may
not be set. Suspending these PCM's will result in their
 ops->trigger() being invoked and cause a kernel oops.
So skip suspending PCM's if their ops are NULL.

[ NOTE: this change is required now for following the recent PCM core
  change to get rid of snd_pcm_suspend() call.  Since DPCM BE takes
  the runtime carried from FE while keeping NULL ops, it can hit this
  bug.  See details at:
     https://github.com/thesofproject/linux/pull/582
  -- tiwai ]

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/core/pcm_native.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index afdb678cc757..14ea26291733 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -1308,6 +1308,14 @@ int snd_pcm_suspend_all(struct snd_pcm *pcm)
 			/* FIXME: the open/close code should lock this as well */
 			if (substream->runtime == NULL)
 				continue;
+
+			/*
+			 * Skip BE dai link PCM's that are internal and may
+			 * not have their substream ops set.
+			 */
+			if (!substream->ops)
+				continue;
+
 			err = snd_pcm_suspend(substream);
 			if (err < 0 && err != -EBUSY)
 				return err;
-- 
2.19.1

[PATCH AUTOSEL 3.18 24/41] bcache: fix input overflow to cache set sysfs file io_error_halflife

[Sasha Levin]

From: Coly Li <colyli@suse.de>

[ Upstream commit a91fbda49f746119828f7e8ad0f0aa2ab0578f65 ]

Cache set sysfs entry io_error_halflife is used to set c->error_decay.
c->error_decay is in type unsigned int, and it is converted by
strtoul_or_return(), therefore overflow to c->error_decay is possible
for a large input value.

This patch fixes the overflow by using strtoul_safe_clamp() to convert
input string to an unsigned long value in range [0, UINT_MAX], then
divides by 88 and set it to c->error_decay.

Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/bcache/sysfs.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/md/bcache/sysfs.c b/drivers/md/bcache/sysfs.c
index 5a5c1f1bd8a5..87daccbbc61b 100644
--- a/drivers/md/bcache/sysfs.c
+++ b/drivers/md/bcache/sysfs.c
@@ -645,8 +645,17 @@ STORE(__bch_cache_set)
 		c->error_limit = strtoul_or_return(buf) << IO_ERROR_SHIFT;
 
 	/* See count_io_errors() for why 88 */
-	if (attr == &sysfs_io_error_halflife)
-		c->error_decay = strtoul_or_return(buf) / 88;
+	if (attr == &sysfs_io_error_halflife) {
+		unsigned long v = 0;
+		ssize_t ret;
+
+		ret = strtoul_safe_clamp(buf, v, 0, UINT_MAX);
+		if (!ret) {
+			c->error_decay = v / 88;
+			return size;
+		}
+		return ret;
+	}
 
 	sysfs_strtoul(journal_delay_ms,		c->journal_delay_ms);
 	sysfs_strtoul(verify,			c->verify);
-- 
2.19.1

[PATCH AUTOSEL 3.18 25/41] bcache: fix input overflow to sequential_cutoff

[Sasha Levin]

From: Coly Li <colyli@suse.de>

[ Upstream commit 8c27a3953e92eb0b22dbb03d599f543a05f9574e ]

People may set sequential_cutoff of a cached device via sysfs file,
but current code does not check input value overflow. E.g. if value
4294967295 (UINT_MAX) is written to file sequential_cutoff, its value
is 4GB, but if 4294967296 (UINT_MAX + 1) is written into, its value
will be 0. This is an unexpected behavior.

This patch replaces d_strtoi_h() by sysfs_strtoul_clamp() to convert
input string to unsigned integer value, and limit its range in
[0, UINT_MAX]. Then the input overflow can be fixed.

Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/bcache/sysfs.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/md/bcache/sysfs.c b/drivers/md/bcache/sysfs.c
index 87daccbbc61b..463ce6757338 100644
--- a/drivers/md/bcache/sysfs.c
+++ b/drivers/md/bcache/sysfs.c
@@ -215,7 +215,9 @@ STORE(__cached_dev)
 	d_strtoul(writeback_rate_d_term);
 	d_strtoul_nonzero(writeback_rate_p_term_inverse);
 
-	d_strtoi_h(sequential_cutoff);
+	sysfs_strtoul_clamp(sequential_cutoff,
+			    dc->sequential_cutoff,
+			    0, UINT_MAX);
 	d_strtoi_h(readahead);
 
 	if (attr == &sysfs_clear_stats)
-- 
2.19.1

[PATCH AUTOSEL 3.18 26/41] bcache: improve sysfs_strtoul_clamp()

[Sasha Levin]

From: Coly Li <colyli@suse.de>

[ Upstream commit 596b5a5dd1bc2fa019fdaaae522ef331deef927f ]

Currently sysfs_strtoul_clamp() is defined as,
 82 #define sysfs_strtoul_clamp(file, var, min, max)                   \
 83 do {                                                               \
 84         if (attr == &sysfs_ ## file)                               \
 85                 return strtoul_safe_clamp(buf, var, min, max)      \
 86                         ?: (ssize_t) size;                         \
 87 } while (0)

The problem is, if bit width of var is less then unsigned long, min and
max may not protect var from integer overflow, because overflow happens
in strtoul_safe_clamp() before checking min and max.

To fix such overflow in sysfs_strtoul_clamp(), to make min and max take
effect, this patch adds an unsigned long variable, and uses it to macro
strtoul_safe_clamp() to convert an unsigned long value in range defined
by [min, max]. Then assign this value to var. By this method, if bit
width of var is less than unsigned long, integer overflow won't happen
before min and max are checking.

Now sysfs_strtoul_clamp() can properly handle smaller data type like
unsigned int, of cause min and max should be defined in range of
unsigned int too.

Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/bcache/sysfs.h | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/md/bcache/sysfs.h b/drivers/md/bcache/sysfs.h
index 0526fe92a683..e7a3c12aa66f 100644
--- a/drivers/md/bcache/sysfs.h
+++ b/drivers/md/bcache/sysfs.h
@@ -80,9 +80,16 @@ do {									\
 
 #define sysfs_strtoul_clamp(file, var, min, max)			\
 do {									\
-	if (attr == &sysfs_ ## file)					\
-		return strtoul_safe_clamp(buf, var, min, max)		\
-			?: (ssize_t) size;				\
+	if (attr == &sysfs_ ## file) {					\
+		unsigned long v = 0;					\
+		ssize_t ret;						\
+		ret = strtoul_safe_clamp(buf, v, min, max);		\
+		if (!ret) {						\
+			var = v;					\
+			return size;					\
+		}							\
+		return ret;						\
+	}								\
 } while (0)
 
 #define strtoul_or_return(cp)						\
-- 
2.19.1

[PATCH AUTOSEL 3.18 27/41] fbdev: fbmem: fix memory access if logo is bigger than the screen

[Sasha Levin]

From: Manfred Schlaegl <manfred.schlaegl@ginzinger.com>

[ Upstream commit a5399db139cb3ad9b8502d8b1bd02da9ce0b9df0 ]

There is no clipping on the x or y axis for logos larger that the framebuffer
size. Therefore: a logo bigger than screen size leads to invalid memory access:

[    1.254664] Backtrace:
[    1.254728] [<c02714e0>] (cfb_imageblit) from [<c026184c>] (fb_show_logo+0x620/0x684)
[    1.254763]  r10:00000003 r9:00027fd8 r8:c6a40000 r7:c6a36e50 r6:00000000 r5:c06b81e4
[    1.254774]  r4:c6a3e800
[    1.254810] [<c026122c>] (fb_show_logo) from [<c026c1e4>] (fbcon_switch+0x3fc/0x46c)
[    1.254842]  r10:c6a3e824 r9:c6a3e800 r8:00000000 r7:c6a0c000 r6:c070b014 r5:c6a3e800
[    1.254852]  r4:c6808c00
[    1.254889] [<c026bde8>] (fbcon_switch) from [<c029c8f8>] (redraw_screen+0xf0/0x1e8)
[    1.254918]  r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:c070d5a0 r5:00000080
[    1.254928]  r4:c6808c00
[    1.254961] [<c029c808>] (redraw_screen) from [<c029d264>] (do_bind_con_driver+0x194/0x2e4)
[    1.254991]  r9:00000000 r8:00000000 r7:00000014 r6:c070d5a0 r5:c070d5a0 r4:c070d5a0

So prevent displaying a logo bigger than screen size and avoid invalid
memory access.

Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com>
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/core/fbmem.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c
index ea2bd6208a2f..9eae191728d2 100644
--- a/drivers/video/fbdev/core/fbmem.c
+++ b/drivers/video/fbdev/core/fbmem.c
@@ -425,6 +425,9 @@ static void fb_do_show_logo(struct fb_info *info, struct fb_image *image,
 {
 	unsigned int x;
 
+	if (image->width > info->var.xres || image->height > info->var.yres)
+		return;
+
 	if (rotate == FB_ROTATE_UR) {
 		for (x = 0;
 		     x < num && image->dx + image->width <= info->var.xres;
-- 
2.19.1

[PATCH AUTOSEL 3.18 27/41] fbdev: fbmem: fix memory access if logo is bigger than the screen

[Sasha Levin]

From: Manfred Schlaegl <manfred.schlaegl@ginzinger.com>

[ Upstream commit a5399db139cb3ad9b8502d8b1bd02da9ce0b9df0 ]

There is no clipping on the x or y axis for logos larger that the framebuffer
size. Therefore: a logo bigger than screen size leads to invalid memory access:

[    1.254664] Backtrace:
[    1.254728] [<c02714e0>] (cfb_imageblit) from [<c026184c>] (fb_show_logo+0x620/0x684)
[    1.254763]  r10:00000003 r9:00027fd8 r8:c6a40000 r7:c6a36e50 r6:00000000 r5:c06b81e4
[    1.254774]  r4:c6a3e800
[    1.254810] [<c026122c>] (fb_show_logo) from [<c026c1e4>] (fbcon_switch+0x3fc/0x46c)
[    1.254842]  r10:c6a3e824 r9:c6a3e800 r8:00000000 r7:c6a0c000 r6:c070b014 r5:c6a3e800
[    1.254852]  r4:c6808c00
[    1.254889] [<c026bde8>] (fbcon_switch) from [<c029c8f8>] (redraw_screen+0xf0/0x1e8)
[    1.254918]  r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:c070d5a0 r5:00000080
[    1.254928]  r4:c6808c00
[    1.254961] [<c029c808>] (redraw_screen) from [<c029d264>] (do_bind_con_driver+0x194/0x2e4)
[    1.254991]  r9:00000000 r8:00000000 r7:00000014 r6:c070d5a0 r5:c070d5a0 r4:c070d5a0

So prevent displaying a logo bigger than screen size and avoid invalid
memory access.

Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com>
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/core/fbmem.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c
index ea2bd6208a2f..9eae191728d2 100644
--- a/drivers/video/fbdev/core/fbmem.c
+++ b/drivers/video/fbdev/core/fbmem.c
@@ -425,6 +425,9 @@ static void fb_do_show_logo(struct fb_info *info, struct fb_image *image,
 {
 	unsigned int x;
 
+	if (image->width > info->var.xres || image->height > info->var.yres)
+		return;
+
 	if (rotate = FB_ROTATE_UR) {
 		for (x = 0;
 		     x < num && image->dx + image->width <= info->var.xres;
-- 
2.19.1

[PATCH AUTOSEL 3.18 28/41] cdrom: Fix race condition in cdrom_sysctl_register

[Sasha Levin]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit f25191bb322dec8fa2979ecb8235643aa42470e1 ]

The following traceback is sometimes seen when booting an image in qemu:

[   54.608293] cdrom: Uniform CD-ROM driver Revision: 3.20
[   54.611085] Fusion MPT base driver 3.04.20
[   54.611877] Copyright (c) 1999-2008 LSI Corporation
[   54.616234] Fusion MPT SAS Host driver 3.04.20
[   54.635139] sysctl duplicate entry: /dev/cdrom//info
[   54.639578] CPU: 0 PID: 266 Comm: kworker/u4:5 Not tainted 5.0.0-rc5 #1
[   54.639578] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
[   54.641273] Workqueue: events_unbound async_run_entry_fn
[   54.641273] Call Trace:
[   54.641273]  dump_stack+0x67/0x90
[   54.641273]  __register_sysctl_table+0x50b/0x570
[   54.641273]  ? rcu_read_lock_sched_held+0x6f/0x80
[   54.641273]  ? kmem_cache_alloc_trace+0x1c7/0x1f0
[   54.646814]  __register_sysctl_paths+0x1c8/0x1f0
[   54.646814]  cdrom_sysctl_register.part.7+0xc/0x5f
[   54.646814]  register_cdrom.cold.24+0x2a/0x33
[   54.646814]  sr_probe+0x4bd/0x580
[   54.646814]  ? __driver_attach+0xd0/0xd0
[   54.646814]  really_probe+0xd6/0x260
[   54.646814]  ? __driver_attach+0xd0/0xd0
[   54.646814]  driver_probe_device+0x4a/0xb0
[   54.646814]  ? __driver_attach+0xd0/0xd0
[   54.646814]  bus_for_each_drv+0x73/0xc0
[   54.646814]  __device_attach+0xd6/0x130
[   54.646814]  bus_probe_device+0x9a/0xb0
[   54.646814]  device_add+0x40c/0x670
[   54.646814]  ? __pm_runtime_resume+0x4f/0x80
[   54.646814]  scsi_sysfs_add_sdev+0x81/0x290
[   54.646814]  scsi_probe_and_add_lun+0x888/0xc00
[   54.646814]  ? scsi_autopm_get_host+0x21/0x40
[   54.646814]  __scsi_add_device+0x116/0x130
[   54.646814]  ata_scsi_scan_host+0x93/0x1c0
[   54.646814]  async_run_entry_fn+0x34/0x100
[   54.646814]  process_one_work+0x237/0x5e0
[   54.646814]  worker_thread+0x37/0x380
[   54.646814]  ? rescuer_thread+0x360/0x360
[   54.646814]  kthread+0x118/0x130
[   54.646814]  ? kthread_create_on_node+0x60/0x60
[   54.646814]  ret_from_fork+0x3a/0x50

The only sensible explanation is that cdrom_sysctl_register() is called
twice, once from the module init function and once from register_cdrom().
cdrom_sysctl_register() is not mutex protected and may happily execute
twice if the second call is made before the first call is complete.

Use a static atomic to ensure that the function is executed exactly once.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cdrom/cdrom.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index 2bd91d4943e1..f4f93ca4bdad 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -265,6 +265,7 @@
 /* #define ERRLOGMASK (CD_WARNING|CD_OPEN|CD_COUNT_TRACKS|CD_CLOSE) */
 /* #define ERRLOGMASK (CD_WARNING|CD_REG_UNREG|CD_DO_IOCTL|CD_OPEN|CD_CLOSE|CD_COUNT_TRACKS) */
 
+#include <linux/atomic.h>
 #include <linux/module.h>
 #include <linux/fs.h>
 #include <linux/major.h>
@@ -3676,9 +3677,9 @@ static struct ctl_table_header *cdrom_sysctl_header;
 
 static void cdrom_sysctl_register(void)
 {
-	static int initialized;
+	static atomic_t initialized = ATOMIC_INIT(0);
 
-	if (initialized == 1)
+	if (!atomic_add_unless(&initialized, 1, 1))
 		return;
 
 	cdrom_sysctl_header = register_sysctl_table(cdrom_root_table);
@@ -3689,8 +3690,6 @@ static void cdrom_sysctl_register(void)
 	cdrom_sysctl_settings.debug = debug;
 	cdrom_sysctl_settings.lock = lockdoor;
 	cdrom_sysctl_settings.check = check_media_type;
-
-	initialized = 1;
 }
 
 static void cdrom_sysctl_unregister(void)
-- 
2.19.1

[PATCH AUTOSEL 3.18 29/41] e1000e: fix cyclic resets at link up with active tx

[Sasha Levin]

From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>

[ Upstream commit 0f9e980bf5ee1a97e2e401c846b2af989eb21c61 ]

I'm seeing series of e1000e resets (sometimes endless) at system boot
if something generates tx traffic at this time. In my case this is
netconsole who sends message "e1000e 0000:02:00.0: Some CPU C-states
have been disabled in order to enable jumbo frames" from e1000e itself.
As result e1000_watchdog_task sees used tx buffer while carrier is off
and start this reset cycle again.

[   17.794359] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[   17.794714] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   22.936455] e1000e 0000:02:00.0 eth1: changing MTU from 1500 to 9000
[   23.033336] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[   26.102364] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[   27.174495] 8021q: 802.1Q VLAN Support v1.8
[   27.174513] 8021q: adding VLAN 0 to HW filter on device eth1
[   30.671724] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation
[   30.898564] netpoll: netconsole: local port 6666
[   30.898566] netpoll: netconsole: local IPv6 address 2a02:6b8:0:80b:beae:c5ff:fe28:23f8
[   30.898567] netpoll: netconsole: interface 'eth1'
[   30.898568] netpoll: netconsole: remote port 6666
[   30.898568] netpoll: netconsole: remote IPv6 address 2a02:6b8:b000:605c:e61d:2dff:fe03:3790
[   30.898569] netpoll: netconsole: remote ethernet address b0:a8:6e:f4:ff:c0
[   30.917747] console [netcon0] enabled
[   30.917749] netconsole: network logging started
[   31.453353] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[   34.185730] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[   34.321840] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[   34.465822] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[   34.597423] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[   34.745417] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[   34.877356] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[   35.005441] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[   35.157376] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[   35.289362] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[   35.417441] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[   37.790342] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None

This patch flushes tx buffers only once when carrier is off
rather than at each watchdog iteration.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index ef5699103ec2..52920d036f49 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -5073,8 +5073,13 @@ static void e1000_watchdog_task(struct work_struct *work)
 			/* 8000ES2LAN requires a Rx packet buffer work-around
 			 * on link down event; reset the controller to flush
 			 * the Rx packet buffer.
+			 *
+			 * If the link is lost the controller stops DMA, but
+			 * if there is queued Tx work it cannot be done.  So
+			 * reset the controller to flush the Tx packet buffers.
 			 */
-			if (adapter->flags & FLAG_RX_NEEDS_RESTART)
+			if ((adapter->flags & FLAG_RX_NEEDS_RESTART) ||
+			    e1000_desc_unused(tx_ring) + 1 < tx_ring->count)
 				adapter->flags |= FLAG_RESTART_NOW;
 			else
 				pm_schedule_suspend(netdev->dev.parent,
@@ -5097,14 +5102,6 @@ static void e1000_watchdog_task(struct work_struct *work)
 	adapter->gotc_old = adapter->stats.gotc;
 	spin_unlock(&adapter->stats64_lock);
 
-	/* If the link is lost the controller stops DMA, but
-	 * if there is queued Tx work it cannot be done.  So
-	 * reset the controller to flush the Tx packet buffers.
-	 */
-	if (!netif_carrier_ok(netdev) &&
-	    (e1000_desc_unused(tx_ring) + 1 < tx_ring->count))
-		adapter->flags |= FLAG_RESTART_NOW;
-
 	/* If reset is necessary, do it outside of interrupt context. */
 	if (adapter->flags & FLAG_RESTART_NOW) {
 		schedule_work(&adapter->reset_task);
-- 
2.19.1

[PATCH AUTOSEL 3.18 30/41] locking/lockdep: Add debug_locks check in __lock_downgrade()

[Sasha Levin]

From: Waiman Long <longman@redhat.com>

[ Upstream commit 71492580571467fb7177aade19c18ce7486267f5 ]

Tetsuo Handa had reported he saw an incorrect "downgrading a read lock"
warning right after a previous lockdep warning. It is likely that the
previous warning turned off lock debugging causing the lockdep to have
inconsistency states leading to the lock downgrade warning.

Fix that by add a check for debug_locks at the beginning of
__lock_downgrade().

Debugged-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Reported-by: syzbot+53383ae265fb161ef488@syzkaller.appspotmail.com
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://lkml.kernel.org/r/1547093005-26085-1-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/locking/lockdep.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index fb90ca3a296e..27de98428367 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -3312,6 +3312,9 @@ __lock_set_class(struct lockdep_map *lock, const char *name,
 	unsigned int depth;
 	int i;
 
+	if (unlikely(!debug_locks))
+		return 0;
+
 	depth = curr->lockdep_depth;
 	/*
 	 * This function is about (re)setting the class of a held lock,
-- 
2.19.1

[PATCH AUTOSEL 3.18 31/41] tty: increase the default flip buffer limit to 2*640K

[Sasha Levin]

From: Manfred Schlaegl <manfred.schlaegl@ginzinger.com>

[ Upstream commit 7ab57b76ebf632bf2231ccabe26bea33868118c6 ]

We increase the default limit for buffer memory allocation by a factor of
10 to 640K to prevent data loss when using fast serial interfaces.

For example when using RS485 without flow-control at speeds of 1Mbit/s
an upwards we've run into problems such as applications being too slow
to read out this buffer (on embedded devices based on imx53 or imx6).

If you want to write transmitted data to a slow SD card and thus have
realtime requirements, this limit can become a problem.

That shouldn't be the case and 640K buffers fix such problems for us.

This value is a maximum limit for allocation only. It has no effect
on systems that currently run fine. When transmission is slow enough
applications and hardware can keep up and increasing this limit
doesn't change anything.

It only _allows_ to allocate more than 2*64K in cases we currently fail to
allocate memory despite having some.

Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com>
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/tty_buffer.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 0d3fc2dae23a..50616c949e8e 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -25,7 +25,7 @@
  * Byte threshold to limit memory consumption for flip buffers.
  * The actual memory limit is > 2x this amount.
  */
-#define TTYB_DEFAULT_MEM_LIMIT	65536
+#define TTYB_DEFAULT_MEM_LIMIT	(640 * 1024UL)
 
 /*
  * We default to dicing tty buffer allocations to this many characters
-- 
2.19.1

[PATCH AUTOSEL 3.18 32/41] media: mt9m111: set initial frame size other than 0x0

[Sasha Levin]

From: Akinobu Mita <akinobu.mita@gmail.com>

[ Upstream commit 29856308137de1c21eda89411695f4fc6e9780ff ]

This driver sets initial frame width and height to 0x0, which is invalid.
So set it to selection rectangle bounds instead.

This is detected by v4l2-compliance detected.

Cc: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
Cc: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/soc_camera/mt9m111.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/media/i2c/soc_camera/mt9m111.c b/drivers/media/i2c/soc_camera/mt9m111.c
index b51e8562e775..1ee437e9cfcb 100644
--- a/drivers/media/i2c/soc_camera/mt9m111.c
+++ b/drivers/media/i2c/soc_camera/mt9m111.c
@@ -983,6 +983,8 @@ static int mt9m111_probe(struct i2c_client *client,
 	mt9m111->rect.top	= MT9M111_MIN_DARK_ROWS;
 	mt9m111->rect.width	= MT9M111_MAX_WIDTH;
 	mt9m111->rect.height	= MT9M111_MAX_HEIGHT;
+	mt9m111->width		= mt9m111->rect.width;
+	mt9m111->height		= mt9m111->rect.height;
 	mt9m111->fmt		= &mt9m111_colour_fmts[0];
 	mt9m111->lastpage	= -1;
 	mutex_init(&mt9m111->power_lock);
-- 
2.19.1

[PATCH AUTOSEL 3.18 33/41] hwrng: virtio - Avoid repeated init of completion

[Sasha Levin]

From: David Tolnay <dtolnay@gmail.com>

[ Upstream commit aef027db48da56b6f25d0e54c07c8401ada6ce21 ]

The virtio-rng driver uses a completion called have_data to wait for a
virtio read to be fulfilled by the hypervisor. The completion is reset
before placing a buffer on the virtio queue and completed by the virtio
callback once data has been written into the buffer.

Prior to this commit, the driver called init_completion on this
completion both during probe as well as when registering virtio buffers
as part of a hwrng read operation. The second of these init_completion
calls should instead be reinit_completion because the have_data
completion has already been inited by probe. As described in
Documentation/scheduler/completion.txt, "Calling init_completion() twice
on the same completion object is most likely a bug".

This bug was present in the initial implementation of virtio-rng in
f7f510ec1957 ("virtio: An entropy device, as suggested by hpa"). Back
then the have_data completion was a single static completion rather than
a member of one of potentially multiple virtrng_info structs as
implemented later by 08e53fbdb85c ("virtio-rng: support multiple
virtio-rng devices"). The original driver incorrectly used
init_completion rather than INIT_COMPLETION to reset have_data during
read.

Tested by running `head -c48 /dev/random | hexdump` within crosvm, the
Chrome OS virtual machine monitor, and confirming that the virtio-rng
driver successfully produces random bytes from the host.

Signed-off-by: David Tolnay <dtolnay@gmail.com>
Tested-by: David Tolnay <dtolnay@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/hw_random/virtio-rng.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c
index 72295ea2fd1c..5cdc8c534ad4 100644
--- a/drivers/char/hw_random/virtio-rng.c
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -74,7 +74,7 @@ static int virtio_read(struct hwrng *rng, void *buf, size_t size, bool wait)
 
 	if (!vi->busy) {
 		vi->busy = true;
-		init_completion(&vi->have_data);
+		reinit_completion(&vi->have_data);
 		register_buffer(vi, buf, size);
 	}
 
-- 
2.19.1

[PATCH AUTOSEL 3.18 34/41] Bluetooth: Verify that l2cap_get_conf_opt provides large enough buffer

[Sasha Levin]

From: Marcel Holtmann <marcel@holtmann.org>

[ Upstream commit 7c9cbd0b5e38a1672fcd137894ace3b042dfbf69 ]

The function l2cap_get_conf_opt will return L2CAP_CONF_OPT_SIZE + opt->len
as length value. The opt->len however is in control over the remote user
and can be used by an attacker to gain access beyond the bounds of the
actual packet.

To prevent any potential leak of heap memory, it is enough to check that
the resulting len calculation after calling l2cap_get_conf_opt is not
below zero. A well formed packet will always return >= 0 here and will
end with the length value being zero after the last option has been
parsed. In case of malformed packets messing with the opt->len field the
length value will become negative. If that is the case, then just abort
and ignore the option.

In case an attacker uses a too short opt->len value, then garbage will
be parsed, but that is protected by the unknown option handling and also
the option parameter size checks.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/l2cap_core.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 0ae6e32ffc17..4c72b2842084 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -3290,6 +3290,8 @@ static int l2cap_parse_conf_req(struct l2cap_chan *chan, void *data, size_t data
 
 	while (len >= L2CAP_CONF_OPT_SIZE) {
 		len -= l2cap_get_conf_opt(&req, &type, &olen, &val);
+		if (len < 0)
+			break;
 
 		hint  = type & L2CAP_CONF_HINT;
 		type &= L2CAP_CONF_MASK;
@@ -3501,6 +3503,8 @@ static int l2cap_parse_conf_rsp(struct l2cap_chan *chan, void *rsp, int len,
 
 	while (len >= L2CAP_CONF_OPT_SIZE) {
 		len -= l2cap_get_conf_opt(&rsp, &type, &olen, &val);
+		if (len < 0)
+			break;
 
 		switch (type) {
 		case L2CAP_CONF_MTU:
@@ -3681,6 +3685,8 @@ static void l2cap_conf_rfc_get(struct l2cap_chan *chan, void *rsp, int len)
 
 	while (len >= L2CAP_CONF_OPT_SIZE) {
 		len -= l2cap_get_conf_opt(&rsp, &type, &olen, &val);
+		if (len < 0)
+			break;
 
 		switch (type) {
 		case L2CAP_CONF_RFC:
-- 
2.19.1

[PATCH AUTOSEL 3.18 35/41] hpet: Fix missing '=' character in the __setup() code of hpet_mmap_enable

[Sasha Levin]

From: Buland Singh <bsingh@redhat.com>

[ Upstream commit 24d48a61f2666630da130cc2ec2e526eacf229e3 ]

Commit '3d035f580699 ("drivers/char/hpet.c: allow user controlled mmap for
user processes")' introduced a new kernel command line parameter hpet_mmap,
that is required to expose the memory map of the HPET registers to
user-space. Unfortunately the kernel command line parameter 'hpet_mmap' is
broken and never takes effect due to missing '=' character in the __setup()
code of hpet_mmap_enable.

Before this patch:

dmesg output with the kernel command line parameter hpet_mmap=1

[    0.204152] HPET mmap disabled

dmesg output with the kernel command line parameter hpet_mmap=0

[    0.204192] HPET mmap disabled

After this patch:

dmesg output with the kernel command line parameter hpet_mmap=1

[    0.203945] HPET mmap enabled

dmesg output with the kernel command line parameter hpet_mmap=0

[    0.204652] HPET mmap disabled

Fixes: 3d035f580699 ("drivers/char/hpet.c: allow user controlled mmap for user processes")
Signed-off-by: Buland Singh <bsingh@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/hpet.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index d5d4cd82b9f7..978a782f5e30 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -377,7 +377,7 @@ static __init int hpet_mmap_enable(char *str)
 	pr_info("HPET mmap %s\n", hpet_mmap_enabled ? "enabled" : "disabled");
 	return 1;
 }
-__setup("hpet_mmap", hpet_mmap_enable);
+__setup("hpet_mmap=", hpet_mmap_enable);
 
 static int hpet_mmap(struct file *file, struct vm_area_struct *vma)
 {
-- 
2.19.1

[PATCH AUTOSEL 3.18 36/41] dmaengine: imx-dma: fix warning comparison of distinct pointer types

[Sasha Levin]

From: Anders Roxell <anders.roxell@linaro.org>

[ Upstream commit 9227ab5643cb8350449502dd9e3168a873ab0e3b ]

The warning got introduced by commit 930507c18304 ("arm64: add basic
Kconfig symbols for i.MX8"). Since it got enabled for arm64. The warning
haven't been seen before since size_t was 'unsigned int' when built on
arm32.

../drivers/dma/imx-dma.c: In function ‘imxdma_sg_next’:
../include/linux/kernel.h:846:29: warning: comparison of distinct pointer types lacks a cast
   (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
                             ^~
../include/linux/kernel.h:860:4: note: in expansion of macro ‘__typecheck’
   (__typecheck(x, y) && __no_side_effects(x, y))
    ^~~~~~~~~~~
../include/linux/kernel.h:870:24: note: in expansion of macro ‘__safe_cmp’
  __builtin_choose_expr(__safe_cmp(x, y), \
                        ^~~~~~~~~~
../include/linux/kernel.h:879:19: note: in expansion of macro ‘__careful_cmp’
 #define min(x, y) __careful_cmp(x, y, <)
                   ^~~~~~~~~~~~~
../drivers/dma/imx-dma.c:288:8: note: in expansion of macro ‘min’
  now = min(d->len, sg_dma_len(sg));
        ^~~

Rework so that we use min_t and pass in the size_t that returns the
minimum of two values, using the specified type.

Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/imx-dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c
index ddfd8024881e..f0182c5001ad 100644
--- a/drivers/dma/imx-dma.c
+++ b/drivers/dma/imx-dma.c
@@ -291,7 +291,7 @@ static inline int imxdma_sg_next(struct imxdma_desc *d)
 	struct scatterlist *sg = d->sg;
 	unsigned long now;
 
-	now = min(d->len, sg_dma_len(sg));
+	now = min_t(size_t, d->len, sg_dma_len(sg));
 	if (d->len != IMX_DMA_LENGTH_LOOP)
 		d->len -= now;
 
-- 
2.19.1

[PATCH AUTOSEL 3.18 37/41] media: s5p-jpeg: Check for fmt_ver_flag when doing fmt enumeration

[Sasha Levin]

From: Pawe? Chmiel <pawel.mikolaj.chmiel@gmail.com>

[ Upstream commit 49710c32cd9d6626a77c9f5f978a5f58cb536b35 ]

Previously when doing format enumeration, it was returning all
 formats supported by driver, even if they're not supported by hw.
Add missing check for fmt_ver_flag, so it'll be fixed and only those
 supported by hw will be returned. Similar thing is already done
 in s5p_jpeg_find_format.

It was found by using v4l2-compliance tool and checking result
 of VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS test
and using v4l2-ctl to get list of all supported formats.

Tested on s5pv210-galaxys (Samsung i9000 phone).

Fixes: bb677f3ac434 ("[media] Exynos4 JPEG codec v4l2 driver")

Signed-off-by: Pawe? Chmiel <pawel.mikolaj.chmiel@gmail.com>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
[hverkuil-cisco@xs4all.nl: fix a few alignment issues]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/s5p-jpeg/jpeg-core.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.c b/drivers/media/platform/s5p-jpeg/jpeg-core.c
index 6fcc7f072ace..480266e01037 100644
--- a/drivers/media/platform/s5p-jpeg/jpeg-core.c
+++ b/drivers/media/platform/s5p-jpeg/jpeg-core.c
@@ -1011,13 +1011,16 @@ static int s5p_jpeg_querycap(struct file *file, void *priv,
 	return 0;
 }
 
-static int enum_fmt(struct s5p_jpeg_fmt *sjpeg_formats, int n,
+static int enum_fmt(struct s5p_jpeg_ctx *ctx,
+		    struct s5p_jpeg_fmt *sjpeg_formats, int n,
 		    struct v4l2_fmtdesc *f, u32 type)
 {
 	int i, num = 0;
+	unsigned int fmt_ver_flag = ctx->jpeg->variant->fmt_ver_flag;
 
 	for (i = 0; i < n; ++i) {
-		if (sjpeg_formats[i].flags & type) {
+		if (sjpeg_formats[i].flags & type &&
+		    sjpeg_formats[i].flags & fmt_ver_flag) {
 			/* index-th format of type type found ? */
 			if (num == f->index)
 				break;
@@ -1043,11 +1046,11 @@ static int s5p_jpeg_enum_fmt_vid_cap(struct file *file, void *priv,
 	struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv);
 
 	if (ctx->mode == S5P_JPEG_ENCODE)
-		return enum_fmt(sjpeg_formats, SJPEG_NUM_FORMATS, f,
+		return enum_fmt(ctx, sjpeg_formats, SJPEG_NUM_FORMATS, f,
 				SJPEG_FMT_FLAG_ENC_CAPTURE);
 
-	return enum_fmt(sjpeg_formats, SJPEG_NUM_FORMATS, f,
-					SJPEG_FMT_FLAG_DEC_CAPTURE);
+	return enum_fmt(ctx, sjpeg_formats, SJPEG_NUM_FORMATS, f,
+			SJPEG_FMT_FLAG_DEC_CAPTURE);
 }
 
 static int s5p_jpeg_enum_fmt_vid_out(struct file *file, void *priv,
@@ -1056,11 +1059,11 @@ static int s5p_jpeg_enum_fmt_vid_out(struct file *file, void *priv,
 	struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv);
 
 	if (ctx->mode == S5P_JPEG_ENCODE)
-		return enum_fmt(sjpeg_formats, SJPEG_NUM_FORMATS, f,
+		return enum_fmt(ctx, sjpeg_formats, SJPEG_NUM_FORMATS, f,
 				SJPEG_FMT_FLAG_ENC_OUTPUT);
 
-	return enum_fmt(sjpeg_formats, SJPEG_NUM_FORMATS, f,
-					SJPEG_FMT_FLAG_DEC_OUTPUT);
+	return enum_fmt(ctx, sjpeg_formats, SJPEG_NUM_FORMATS, f,
+			SJPEG_FMT_FLAG_DEC_OUTPUT);
 }
 
 static struct s5p_jpeg_q_data *get_q_data(struct s5p_jpeg_ctx *ctx,
-- 
2.19.1

[PATCH AUTOSEL 3.18 37/41] media: s5p-jpeg: Check for fmt_ver_flag when doing fmt enumeration

[Sasha Levin]

From: Pawe? Chmiel <pawel.mikolaj.chmiel@gmail.com>

[ Upstream commit 49710c32cd9d6626a77c9f5f978a5f58cb536b35 ]

Previously when doing format enumeration, it was returning all
 formats supported by driver, even if they're not supported by hw.
Add missing check for fmt_ver_flag, so it'll be fixed and only those
 supported by hw will be returned. Similar thing is already done
 in s5p_jpeg_find_format.

It was found by using v4l2-compliance tool and checking result
 of VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS test
and using v4l2-ctl to get list of all supported formats.

Tested on s5pv210-galaxys (Samsung i9000 phone).

Fixes: bb677f3ac434 ("[media] Exynos4 JPEG codec v4l2 driver")

Signed-off-by: Pawe? Chmiel <pawel.mikolaj.chmiel@gmail.com>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
[hverkuil-cisco@xs4all.nl: fix a few alignment issues]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/s5p-jpeg/jpeg-core.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.c b/drivers/media/platform/s5p-jpeg/jpeg-core.c
index 6fcc7f072ace..480266e01037 100644
--- a/drivers/media/platform/s5p-jpeg/jpeg-core.c
+++ b/drivers/media/platform/s5p-jpeg/jpeg-core.c
@@ -1011,13 +1011,16 @@ static int s5p_jpeg_querycap(struct file *file, void *priv,
 	return 0;
 }
 
-static int enum_fmt(struct s5p_jpeg_fmt *sjpeg_formats, int n,
+static int enum_fmt(struct s5p_jpeg_ctx *ctx,
+		    struct s5p_jpeg_fmt *sjpeg_formats, int n,
 		    struct v4l2_fmtdesc *f, u32 type)
 {
 	int i, num = 0;
+	unsigned int fmt_ver_flag = ctx->jpeg->variant->fmt_ver_flag;
 
 	for (i = 0; i < n; ++i) {
-		if (sjpeg_formats[i].flags & type) {
+		if (sjpeg_formats[i].flags & type &&
+		    sjpeg_formats[i].flags & fmt_ver_flag) {
 			/* index-th format of type type found ? */
 			if (num == f->index)
 				break;
@@ -1043,11 +1046,11 @@ static int s5p_jpeg_enum_fmt_vid_cap(struct file *file, void *priv,
 	struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv);
 
 	if (ctx->mode == S5P_JPEG_ENCODE)
-		return enum_fmt(sjpeg_formats, SJPEG_NUM_FORMATS, f,
+		return enum_fmt(ctx, sjpeg_formats, SJPEG_NUM_FORMATS, f,
 				SJPEG_FMT_FLAG_ENC_CAPTURE);
 
-	return enum_fmt(sjpeg_formats, SJPEG_NUM_FORMATS, f,
-					SJPEG_FMT_FLAG_DEC_CAPTURE);
+	return enum_fmt(ctx, sjpeg_formats, SJPEG_NUM_FORMATS, f,
+			SJPEG_FMT_FLAG_DEC_CAPTURE);
 }
 
 static int s5p_jpeg_enum_fmt_vid_out(struct file *file, void *priv,
@@ -1056,11 +1059,11 @@ static int s5p_jpeg_enum_fmt_vid_out(struct file *file, void *priv,
 	struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv);
 
 	if (ctx->mode == S5P_JPEG_ENCODE)
-		return enum_fmt(sjpeg_formats, SJPEG_NUM_FORMATS, f,
+		return enum_fmt(ctx, sjpeg_formats, SJPEG_NUM_FORMATS, f,
 				SJPEG_FMT_FLAG_ENC_OUTPUT);
 
-	return enum_fmt(sjpeg_formats, SJPEG_NUM_FORMATS, f,
-					SJPEG_FMT_FLAG_DEC_OUTPUT);
+	return enum_fmt(ctx, sjpeg_formats, SJPEG_NUM_FORMATS, f,
+			SJPEG_FMT_FLAG_DEC_OUTPUT);
 }
 
 static struct s5p_jpeg_q_data *get_q_data(struct s5p_jpeg_ctx *ctx,
-- 
2.19.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 3.18 38/41] wlcore: Fix memory leak in case wl12xx_fetch_firmware failure

[Sasha Levin]

From: Zumeng Chen <zumeng.chen@gmail.com>

[ Upstream commit ba2ffc96321c8433606ceeb85c9e722b8113e5a7 ]

Release fw_status, raw_fw_status, and tx_res_if when wl12xx_fetch_firmware
failed instead of meaningless goto out to avoid the following memory leak
reports(Only the last one listed):

unreferenced object 0xc28a9a00 (size 512):
  comm "kworker/0:4", pid 31298, jiffies 2783204 (age 203.290s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
  backtrace:
    [<6624adab>] kmemleak_alloc+0x40/0x74
    [<500ddb31>] kmem_cache_alloc_trace+0x1ac/0x270
    [<db4d731d>] wl12xx_chip_wakeup+0xc4/0x1fc [wlcore]
    [<76c5db53>] wl1271_op_add_interface+0x4a4/0x8f4 [wlcore]
    [<cbf30777>] drv_add_interface+0xa4/0x1a0 [mac80211]
    [<65bac325>] ieee80211_reconfig+0x9c0/0x1644 [mac80211]
    [<2817c80e>] ieee80211_restart_work+0x90/0xc8 [mac80211]
    [<7e1d425a>] process_one_work+0x284/0x42c
    [<55f9432e>] worker_thread+0x2fc/0x48c
    [<abb582c6>] kthread+0x148/0x160
    [<63144b13>] ret_from_fork+0x14/0x2c
    [< (null)>] (null)
    [<1f6e7715>] 0xffffffff

Signed-off-by: Zumeng Chen <zumeng.chen@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ti/wlcore/main.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 575c8f6d4009..16b69b026f8f 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -1110,8 +1110,11 @@ static int wl12xx_chip_wakeup(struct wl1271 *wl, bool plt)
 		goto out;
 
 	ret = wl12xx_fetch_firmware(wl, plt);
-	if (ret < 0)
-		goto out;
+	if (ret < 0) {
+		kfree(wl->fw_status);
+		kfree(wl->raw_fw_status);
+		kfree(wl->tx_res_if);
+	}
 
 out:
 	return ret;
-- 
2.19.1

[PATCH AUTOSEL 3.18 39/41] x86/build: Mark per-CPU symbols as absolute explicitly for LLD

[Sasha Levin]

From: Rafael Ávila de Espíndola <rafael@espindo.la>

[ Upstream commit d071ae09a4a1414c1433d5ae9908959a7325b0ad ]

Accessing per-CPU variables is done by finding the offset of the
variable in the per-CPU block and adding it to the address of the
respective CPU's block.

Section 3.10.8 of ld.bfd's documentation states:

  For expressions involving numbers, relative addresses and absolute
  addresses, ld follows these rules to evaluate terms:

  Other binary operations, that is, between two relative addresses
  not in the same section, or between a relative address and an
  absolute address, first convert any non-absolute term to an
  absolute address before applying the operator."

Note that LLVM's linker does not adhere to the GNU ld's implementation
and as such requires implicitly-absolute terms to be explicitly marked
as absolute in the linker script. If not, it fails currently with:

  ld.lld: error: ./arch/x86/kernel/vmlinux.lds:153: at least one side of the expression must be absolute
  ld.lld: error: ./arch/x86/kernel/vmlinux.lds:154: at least one side of the expression must be absolute
  Makefile:1040: recipe for target 'vmlinux' failed

This is not a functional change for ld.bfd which converts the term to an
absolute symbol anyways as specified above.

Based on a previous submission by Tri Vo <trong@android.com>.

Reported-by: Dmitry Golovin <dima@golovin.in>
Signed-off-by: Rafael Ávila de Espíndola <rafael@espindo.la>
[ Update commit message per Boris' and Michael's suggestions. ]
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
[ Massage commit message more, fix typos. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Dmitry Golovin <dima@golovin.in>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Cao Jin <caoj.fnst@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tri Vo <trong@android.com>
Cc: dima@golovin.in
Cc: morbo@google.com
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20181219190145.252035-1-ndesaulniers@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/vmlinux.lds.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 49edf2dd3613..1bd47a144db1 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -345,7 +345,7 @@ SECTIONS
  * Per-cpu symbols which need to be offset from __per_cpu_load
  * for the boot processor.
  */
-#define INIT_PER_CPU(x) init_per_cpu__##x = x + __per_cpu_load
+#define INIT_PER_CPU(x) init_per_cpu__##x = ABSOLUTE(x) + __per_cpu_load
 INIT_PER_CPU(gdt_page);
 INIT_PER_CPU(irq_stack_union);
 
-- 
2.19.1

[PATCH AUTOSEL 3.18 40/41] dmaengine: tegra: avoid overflow of byte tracking

[Sasha Levin]

From: Ben Dooks <ben.dooks@codethink.co.uk>

[ Upstream commit e486df39305864604b7e25f2a95d51039517ac57 ]

The dma_desc->bytes_transferred counter tracks the number of bytes
moved by the DMA channel. This is then used to calculate the information
passed back in the in the tegra_dma_tx_status callback, which is usually
fine.

When the DMA channel is configured as continous, then the bytes_transferred
counter will increase over time and eventually overflow to become negative
so the residue count will become invalid and the ALSA sound-dma code will
report invalid hardware pointer values to the application. This results in
some users becoming confused about the playout position and putting audio
data in the wrong place.

To fix this issue, always ensure the bytes_transferred field is modulo the
size of the request. We only do this for the case of the cyclic transfer
done ISR as anyone attempting to move 2GiB of DMA data in one transfer
is unlikely.

Note, we don't fix the issue that we should /never/ transfer a negative
number of bytes so we could make those fields unsigned.

Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/tegra20-apb-dma.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
index 16efa603ff65..8ebc43dbda3c 100644
--- a/drivers/dma/tegra20-apb-dma.c
+++ b/drivers/dma/tegra20-apb-dma.c
@@ -613,7 +613,10 @@ static void handle_cont_sngl_cycle_dma_done(struct tegra_dma_channel *tdc,
 
 	sgreq = list_first_entry(&tdc->pending_sg_req, typeof(*sgreq), node);
 	dma_desc = sgreq->dma_desc;
-	dma_desc->bytes_transferred += sgreq->req_len;
+	/* if we dma for long enough the transfer count will wrap */
+	dma_desc->bytes_transferred =
+		(dma_desc->bytes_transferred + sgreq->req_len) %
+		dma_desc->bytes_requested;
 
 	/* Callback need to be call */
 	if (!dma_desc->cb_count)
-- 
2.19.1

[PATCH AUTOSEL 3.18 41/41] drm/dp/mst: Configure no_stop_bit correctly for remote i2c xfers

[Sasha Levin]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

[ Upstream commit c978ae9bde582e82a04c63a4071701691dd8b35c ]

We aren't supposed to force a stop+start between every i2c msg
when performing multi message transfers. This should eg. cause
the DDC segment address to be reset back to 0 between writing
the segment address and reading the actual EDID extension block.

To quote the E-DDC spec:
"... this standard requires that the segment pointer be
 reset to 00h when a NO ACK or a STOP condition is received."

Since we're going to touch this might as well consult the
I2C_M_STOP flag to determine whether we want to force the stop
or not.

Cc: Brian Vincent <brainn@gmail.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=108081
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180928180403.22499-1-ville.syrjala@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_dp_mst_topology.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
index 7113c95f5ad0..e4c8c594ea15 100644
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -2816,6 +2816,7 @@ static int drm_dp_mst_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs
 		msg.u.i2c_read.transactions[i].i2c_dev_id = msgs[i].addr;
 		msg.u.i2c_read.transactions[i].num_bytes = msgs[i].len;
 		msg.u.i2c_read.transactions[i].bytes = msgs[i].buf;
+		msg.u.i2c_read.transactions[i].no_stop_bit = !(msgs[i].flags & I2C_M_STOP);
 	}
 	msg.u.i2c_read.read_i2c_device_id = msgs[num - 1].addr;
 	msg.u.i2c_read.num_bytes_read = msgs[num - 1].len;
-- 
2.19.1

[PATCH AUTOSEL 3.18 41/41] drm/dp/mst: Configure no_stop_bit correctly for remote i2c xfers

[Sasha Levin]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

[ Upstream commit c978ae9bde582e82a04c63a4071701691dd8b35c ]

We aren't supposed to force a stop+start between every i2c msg
when performing multi message transfers. This should eg. cause
the DDC segment address to be reset back to 0 between writing
the segment address and reading the actual EDID extension block.

To quote the E-DDC spec:
"... this standard requires that the segment pointer be
 reset to 00h when a NO ACK or a STOP condition is received."

Since we're going to touch this might as well consult the
I2C_M_STOP flag to determine whether we want to force the stop
or not.

Cc: Brian Vincent <brainn@gmail.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=108081
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180928180403.22499-1-ville.syrjala@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_dp_mst_topology.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
index 7113c95f5ad0..e4c8c594ea15 100644
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -2816,6 +2816,7 @@ static int drm_dp_mst_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs
 		msg.u.i2c_read.transactions[i].i2c_dev_id = msgs[i].addr;
 		msg.u.i2c_read.transactions[i].num_bytes = msgs[i].len;
 		msg.u.i2c_read.transactions[i].bytes = msgs[i].buf;
+		msg.u.i2c_read.transactions[i].no_stop_bit = !(msgs[i].flags & I2C_M_STOP);
 	}
 	msg.u.i2c_read.read_i2c_device_id = msgs[num - 1].addr;
 	msg.u.i2c_read.num_bytes_read = msgs[num - 1].len;
-- 
2.19.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel