[PATCH 0/3] dt-bindings: meson: Add G12A display bindings

[PATCH 0/3] dt-bindings: meson: Add G12A display bindings

[Neil Armstrong]

This patchset adds the G12A specific bindings for the Display VPU
and VPU Power Control.

The Amlogic Meson G12A Display module is based on the Meson GXM SoC
with an updated Plane Blender, thus VPU architecture and interconnect
is the same.

Implementation then DT nodes will come in a further patchsets.

Neil Armstrong (3):
  dt-bindings: display: amlogic,meson-vpu: Add G12A compatible and ports
  dt-bindings: display: amlogic,meson-dw-hdmi: Add G12A compatible and
    ports
  dt-bindings: power: amlogic,meson-gx-pwrc: Add G12A compatible

 .../devicetree/bindings/display/amlogic,meson-dw-hdmi.txt     | 4 ++++
 .../devicetree/bindings/display/amlogic,meson-vpu.txt         | 4 ++++
 .../devicetree/bindings/power/amlogic,meson-gx-pwrc.txt       | 4 +++-
 3 files changed, 11 insertions(+), 1 deletion(-)

-- 
2.20.1

[PATCH 0/3] dt-bindings: meson: Add G12A display bindings

[Neil Armstrong]

This patchset adds the G12A specific bindings for the Display VPU
and VPU Power Control.

The Amlogic Meson G12A Display module is based on the Meson GXM SoC
with an updated Plane Blender, thus VPU architecture and interconnect
is the same.

Implementation then DT nodes will come in a further patchsets.

Neil Armstrong (3):
  dt-bindings: display: amlogic,meson-vpu: Add G12A compatible and ports
  dt-bindings: display: amlogic,meson-dw-hdmi: Add G12A compatible and
    ports
  dt-bindings: power: amlogic,meson-gx-pwrc: Add G12A compatible

 .../devicetree/bindings/display/amlogic,meson-dw-hdmi.txt     | 4 ++++
 .../devicetree/bindings/display/amlogic,meson-vpu.txt         | 4 ++++
 .../devicetree/bindings/power/amlogic,meson-gx-pwrc.txt       | 4 +++-
 3 files changed, 11 insertions(+), 1 deletion(-)

-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 0/3] dt-bindings: meson: Add G12A display bindings

[Neil Armstrong]

This patchset adds the G12A specific bindings for the Display VPU
and VPU Power Control.

The Amlogic Meson G12A Display module is based on the Meson GXM SoC
with an updated Plane Blender, thus VPU architecture and interconnect
is the same.

Implementation then DT nodes will come in a further patchsets.

Neil Armstrong (3):
  dt-bindings: display: amlogic,meson-vpu: Add G12A compatible and ports
  dt-bindings: display: amlogic,meson-dw-hdmi: Add G12A compatible and
    ports
  dt-bindings: power: amlogic,meson-gx-pwrc: Add G12A compatible

 .../devicetree/bindings/display/amlogic,meson-dw-hdmi.txt     | 4 ++++
 .../devicetree/bindings/display/amlogic,meson-vpu.txt         | 4 ++++
 .../devicetree/bindings/power/amlogic,meson-gx-pwrc.txt       | 4 +++-
 3 files changed, 11 insertions(+), 1 deletion(-)

-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 1/3] dt-bindings: display: amlogic,meson-vpu: Add G12A compatible and ports

[Neil Armstrong]

The Amlogic G12A VPU is very similar to the Amlogic GXM VPU but with :
- an enhanced plane blender, with up to 3 OSD planes
- support for AFBC 1.2 decoder (for Bifrost GPU)
- support display mode up to 4k60@75Hz

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../devicetree/bindings/display/amlogic,meson-vpu.txt         | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
index 419444e2b4d3..be40a780501c 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
@@ -57,6 +57,7 @@ Required properties:
 	- GXL (S905X, S905D) : "amlogic,meson-gxl-vpu"
 	- GXM (S912) : "amlogic,meson-gxm-vpu"
 	followed by the common "amlogic,meson-gx-vpu"
+	- G12A (S905X2, S905Y2, S905D2) : "amlogic,meson-g12a-vpu"
 - reg: base address and size of he following memory-mapped regions :
 	- vpu
 	- hhi
@@ -83,6 +84,9 @@ corresponding to each VPU output.
  S905X (GXL)	CVBS VDAC	HDMI-TX
  S905D (GXL)	CVBS VDAC	HDMI-TX
  S912 (GXM)	CVBS VDAC	HDMI-TX
+ S905X2 (G12A)	CVBS VDAC	HDMI-TX
+ S905Y2 (G12A)	CVBS VDAC	HDMI-TX
+ S905D2 (G12A)	CVBS VDAC	HDMI-TX
 
 Example:
 
-- 
2.20.1

[PATCH 1/3] dt-bindings: display: amlogic, meson-vpu: Add G12A compatible and ports

[Neil Armstrong]

The Amlogic G12A VPU is very similar to the Amlogic GXM VPU but with :
- an enhanced plane blender, with up to 3 OSD planes
- support for AFBC 1.2 decoder (for Bifrost GPU)
- support display mode up to 4k60@75Hz

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../devicetree/bindings/display/amlogic,meson-vpu.txt         | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
index 419444e2b4d3..be40a780501c 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
@@ -57,6 +57,7 @@ Required properties:
 	- GXL (S905X, S905D) : "amlogic,meson-gxl-vpu"
 	- GXM (S912) : "amlogic,meson-gxm-vpu"
 	followed by the common "amlogic,meson-gx-vpu"
+	- G12A (S905X2, S905Y2, S905D2) : "amlogic,meson-g12a-vpu"
 - reg: base address and size of he following memory-mapped regions :
 	- vpu
 	- hhi
@@ -83,6 +84,9 @@ corresponding to each VPU output.
  S905X (GXL)	CVBS VDAC	HDMI-TX
  S905D (GXL)	CVBS VDAC	HDMI-TX
  S912 (GXM)	CVBS VDAC	HDMI-TX
+ S905X2 (G12A)	CVBS VDAC	HDMI-TX
+ S905Y2 (G12A)	CVBS VDAC	HDMI-TX
+ S905D2 (G12A)	CVBS VDAC	HDMI-TX
 
 Example:
 
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 1/3] dt-bindings: display: amlogic, meson-vpu: Add G12A compatible and ports

[Neil Armstrong]

The Amlogic G12A VPU is very similar to the Amlogic GXM VPU but with :
- an enhanced plane blender, with up to 3 OSD planes
- support for AFBC 1.2 decoder (for Bifrost GPU)
- support display mode up to 4k60@75Hz

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../devicetree/bindings/display/amlogic,meson-vpu.txt         | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
index 419444e2b4d3..be40a780501c 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
@@ -57,6 +57,7 @@ Required properties:
 	- GXL (S905X, S905D) : "amlogic,meson-gxl-vpu"
 	- GXM (S912) : "amlogic,meson-gxm-vpu"
 	followed by the common "amlogic,meson-gx-vpu"
+	- G12A (S905X2, S905Y2, S905D2) : "amlogic,meson-g12a-vpu"
 - reg: base address and size of he following memory-mapped regions :
 	- vpu
 	- hhi
@@ -83,6 +84,9 @@ corresponding to each VPU output.
  S905X (GXL)	CVBS VDAC	HDMI-TX
  S905D (GXL)	CVBS VDAC	HDMI-TX
  S912 (GXM)	CVBS VDAC	HDMI-TX
+ S905X2 (G12A)	CVBS VDAC	HDMI-TX
+ S905Y2 (G12A)	CVBS VDAC	HDMI-TX
+ S905D2 (G12A)	CVBS VDAC	HDMI-TX
 
 Example:
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 1/3] dt-bindings: display: amlogic, meson-vpu: Add G12A compatible and ports

[Neil Armstrong]

The Amlogic G12A VPU is very similar to the Amlogic GXM VPU but with :
- an enhanced plane blender, with up to 3 OSD planes
- support for AFBC 1.2 decoder (for Bifrost GPU)
- support display mode up to 4k60@75Hz

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../devicetree/bindings/display/amlogic,meson-vpu.txt         | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
index 419444e2b4d3..be40a780501c 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
@@ -57,6 +57,7 @@ Required properties:
 	- GXL (S905X, S905D) : "amlogic,meson-gxl-vpu"
 	- GXM (S912) : "amlogic,meson-gxm-vpu"
 	followed by the common "amlogic,meson-gx-vpu"
+	- G12A (S905X2, S905Y2, S905D2) : "amlogic,meson-g12a-vpu"
 - reg: base address and size of he following memory-mapped regions :
 	- vpu
 	- hhi
@@ -83,6 +84,9 @@ corresponding to each VPU output.
  S905X (GXL)	CVBS VDAC	HDMI-TX
  S905D (GXL)	CVBS VDAC	HDMI-TX
  S912 (GXM)	CVBS VDAC	HDMI-TX
+ S905X2 (G12A)	CVBS VDAC	HDMI-TX
+ S905Y2 (G12A)	CVBS VDAC	HDMI-TX
+ S905D2 (G12A)	CVBS VDAC	HDMI-TX
 
 Example:
 
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 1/3] dt-bindings: display: amlogic, meson-vpu: Add G12A compatible and ports

[Rob Herring]

On Wed, 13 Mar 2019 15:10:28 +0100, Neil Armstrong wrote:
> The Amlogic G12A VPU is very similar to the Amlogic GXM VPU but with :
> - an enhanced plane blender, with up to 3 OSD planes
> - support for AFBC 1.2 decoder (for Bifrost GPU)
> - support display mode up to 4k60@75Hz
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  .../devicetree/bindings/display/amlogic,meson-vpu.txt         | 4 ++++
>  1 file changed, 4 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH 1/3] dt-bindings: display: amlogic, meson-vpu: Add G12A compatible and ports

[Rob Herring]

On Wed, 13 Mar 2019 15:10:28 +0100, Neil Armstrong wrote:
> The Amlogic G12A VPU is very similar to the Amlogic GXM VPU but with :
> - an enhanced plane blender, with up to 3 OSD planes
> - support for AFBC 1.2 decoder (for Bifrost GPU)
> - support display mode up to 4k60@75Hz
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  .../devicetree/bindings/display/amlogic,meson-vpu.txt         | 4 ++++
>  1 file changed, 4 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 1/3] dt-bindings: display: amlogic, meson-vpu: Add G12A compatible and ports

[Rob Herring]

On Wed, 13 Mar 2019 15:10:28 +0100, Neil Armstrong wrote:
> The Amlogic G12A VPU is very similar to the Amlogic GXM VPU but with :
> - an enhanced plane blender, with up to 3 OSD planes
> - support for AFBC 1.2 decoder (for Bifrost GPU)
> - support display mode up to 4k60@75Hz
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  .../devicetree/bindings/display/amlogic,meson-vpu.txt         | 4 ++++
>  1 file changed, 4 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/3] dt-bindings: display: amlogic, meson-vpu: Add G12A compatible and ports

[Rob Herring]

On Wed, 13 Mar 2019 15:10:28 +0100, Neil Armstrong wrote:
> The Amlogic G12A VPU is very similar to the Amlogic GXM VPU but with :
> - an enhanced plane blender, with up to 3 OSD planes
> - support for AFBC 1.2 decoder (for Bifrost GPU)
> - support display mode up to 4k60@75Hz
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  .../devicetree/bindings/display/amlogic,meson-vpu.txt         | 4 ++++
>  1 file changed, 4 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

[PATCH 2/3] dt-bindings: display: amlogic,meson-dw-hdmi: Add G12A compatible and ports

[Neil Armstrong]

The Amlogic G12A SoC has a slighly modified DW-HDMI Glue with
support for HDMI 2.1 and a different DW-HDMI register access.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../devicetree/bindings/display/amlogic,meson-dw-hdmi.txt     | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
index bf4a18047309..3a50a7862cf3 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
@@ -37,6 +37,7 @@ Required properties:
 	- GXL (S905X, S905D) : "amlogic,meson-gxl-dw-hdmi"
 	- GXM (S912) : "amlogic,meson-gxm-dw-hdmi"
 	followed by the common "amlogic,meson-gx-dw-hdmi"
+	- G12A (S905X2, S905Y2, S905D2) : "amlogic,meson-g12a-dw-hdmi"
 - reg: Physical base address and length of the controller's registers.
 - interrupts: The HDMI interrupt number
 - clocks, clock-names : must have the phandles to the HDMI iahb and isfr clocks,
@@ -66,6 +67,9 @@ corresponding to each HDMI output and input.
  S905X (GXL)	VENC Input	TMDS Output
  S905D (GXL)	VENC Input	TMDS Output
  S912 (GXM)	VENC Input	TMDS Output
+ S905X2 (G12A)	VENC Input	TMDS Output
+ S905Y2 (G12A)	VENC Input	TMDS Output
+ S905D2 (G12A)	VENC Input	TMDS Output
 
 Example:
 
-- 
2.20.1

[PATCH 2/3] dt-bindings: display: amlogic, meson-dw-hdmi: Add G12A compatible and ports

[Neil Armstrong]

The Amlogic G12A SoC has a slighly modified DW-HDMI Glue with
support for HDMI 2.1 and a different DW-HDMI register access.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../devicetree/bindings/display/amlogic,meson-dw-hdmi.txt     | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
index bf4a18047309..3a50a7862cf3 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
@@ -37,6 +37,7 @@ Required properties:
 	- GXL (S905X, S905D) : "amlogic,meson-gxl-dw-hdmi"
 	- GXM (S912) : "amlogic,meson-gxm-dw-hdmi"
 	followed by the common "amlogic,meson-gx-dw-hdmi"
+	- G12A (S905X2, S905Y2, S905D2) : "amlogic,meson-g12a-dw-hdmi"
 - reg: Physical base address and length of the controller's registers.
 - interrupts: The HDMI interrupt number
 - clocks, clock-names : must have the phandles to the HDMI iahb and isfr clocks,
@@ -66,6 +67,9 @@ corresponding to each HDMI output and input.
  S905X (GXL)	VENC Input	TMDS Output
  S905D (GXL)	VENC Input	TMDS Output
  S912 (GXM)	VENC Input	TMDS Output
+ S905X2 (G12A)	VENC Input	TMDS Output
+ S905Y2 (G12A)	VENC Input	TMDS Output
+ S905D2 (G12A)	VENC Input	TMDS Output
 
 Example:
 
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 2/3] dt-bindings: display: amlogic, meson-dw-hdmi: Add G12A compatible and ports

[Neil Armstrong]

The Amlogic G12A SoC has a slighly modified DW-HDMI Glue with
support for HDMI 2.1 and a different DW-HDMI register access.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../devicetree/bindings/display/amlogic,meson-dw-hdmi.txt     | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
index bf4a18047309..3a50a7862cf3 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
@@ -37,6 +37,7 @@ Required properties:
 	- GXL (S905X, S905D) : "amlogic,meson-gxl-dw-hdmi"
 	- GXM (S912) : "amlogic,meson-gxm-dw-hdmi"
 	followed by the common "amlogic,meson-gx-dw-hdmi"
+	- G12A (S905X2, S905Y2, S905D2) : "amlogic,meson-g12a-dw-hdmi"
 - reg: Physical base address and length of the controller's registers.
 - interrupts: The HDMI interrupt number
 - clocks, clock-names : must have the phandles to the HDMI iahb and isfr clocks,
@@ -66,6 +67,9 @@ corresponding to each HDMI output and input.
  S905X (GXL)	VENC Input	TMDS Output
  S905D (GXL)	VENC Input	TMDS Output
  S912 (GXM)	VENC Input	TMDS Output
+ S905X2 (G12A)	VENC Input	TMDS Output
+ S905Y2 (G12A)	VENC Input	TMDS Output
+ S905D2 (G12A)	VENC Input	TMDS Output
 
 Example:
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/3] dt-bindings: display: amlogic, meson-dw-hdmi: Add G12A compatible and ports

[Neil Armstrong]

The Amlogic G12A SoC has a slighly modified DW-HDMI Glue with
support for HDMI 2.1 and a different DW-HDMI register access.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../devicetree/bindings/display/amlogic,meson-dw-hdmi.txt     | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
index bf4a18047309..3a50a7862cf3 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
@@ -37,6 +37,7 @@ Required properties:
 	- GXL (S905X, S905D) : "amlogic,meson-gxl-dw-hdmi"
 	- GXM (S912) : "amlogic,meson-gxm-dw-hdmi"
 	followed by the common "amlogic,meson-gx-dw-hdmi"
+	- G12A (S905X2, S905Y2, S905D2) : "amlogic,meson-g12a-dw-hdmi"
 - reg: Physical base address and length of the controller's registers.
 - interrupts: The HDMI interrupt number
 - clocks, clock-names : must have the phandles to the HDMI iahb and isfr clocks,
@@ -66,6 +67,9 @@ corresponding to each HDMI output and input.
  S905X (GXL)	VENC Input	TMDS Output
  S905D (GXL)	VENC Input	TMDS Output
  S912 (GXM)	VENC Input	TMDS Output
+ S905X2 (G12A)	VENC Input	TMDS Output
+ S905Y2 (G12A)	VENC Input	TMDS Output
+ S905D2 (G12A)	VENC Input	TMDS Output
 
 Example:
 
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 2/3] dt-bindings: display: amlogic,meson-dw-hdmi: Add G12A compatible and ports

[Rob Herring]

On Wed, 13 Mar 2019 15:10:29 +0100, Neil Armstrong wrote:
> The Amlogic G12A SoC has a slighly modified DW-HDMI Glue with
> support for HDMI 2.1 and a different DW-HDMI register access.
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  .../devicetree/bindings/display/amlogic,meson-dw-hdmi.txt     | 4 ++++
>  1 file changed, 4 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH 2/3] dt-bindings: display: amlogic,meson-dw-hdmi: Add G12A compatible and ports

[Rob Herring]

On Wed, 13 Mar 2019 15:10:29 +0100, Neil Armstrong wrote:
> The Amlogic G12A SoC has a slighly modified DW-HDMI Glue with
> support for HDMI 2.1 and a different DW-HDMI register access.
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  .../devicetree/bindings/display/amlogic,meson-dw-hdmi.txt     | 4 ++++
>  1 file changed, 4 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 2/3] dt-bindings: display: amlogic,meson-dw-hdmi: Add G12A compatible and ports

[Rob Herring]

On Wed, 13 Mar 2019 15:10:29 +0100, Neil Armstrong wrote:
> The Amlogic G12A SoC has a slighly modified DW-HDMI Glue with
> support for HDMI 2.1 and a different DW-HDMI register access.
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  .../devicetree/bindings/display/amlogic,meson-dw-hdmi.txt     | 4 ++++
>  1 file changed, 4 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/3] dt-bindings: display: amlogic,meson-dw-hdmi: Add G12A compatible and ports

[Rob Herring]

On Wed, 13 Mar 2019 15:10:29 +0100, Neil Armstrong wrote:
> The Amlogic G12A SoC has a slighly modified DW-HDMI Glue with
> support for HDMI 2.1 and a different DW-HDMI register access.
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  .../devicetree/bindings/display/amlogic,meson-dw-hdmi.txt     | 4 ++++
>  1 file changed, 4 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

[PATCH 3/3] dt-bindings: power: amlogic,meson-gx-pwrc: Add G12A compatible

[Neil Armstrong]

The Amlogic G12A has a slighly different Power Control, but uses the
same address space and sysctrl registers.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../devicetree/bindings/power/amlogic,meson-gx-pwrc.txt       | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
index 1cd050b4054c..0fdc3dd1125e 100644
--- a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
@@ -16,7 +16,9 @@ Device Tree Bindings:
 ---------------------
 
 Required properties:
-- compatible: should be "amlogic,meson-gx-pwrc-vpu" for the Meson GX SoCs
+- compatible: should be one of the following :
+	- "amlogic,meson-gx-pwrc-vpu" for the Meson GX SoCs
+	- "amlogic,meson-g12a-pwrc-vpu" for the Meson G12A SoCs
 - #power-domain-cells: should be 0
 - amlogic,hhi-sysctrl: phandle to the HHI sysctrl node
 - resets: phandles to the reset lines needed for this power demain sequence
-- 
2.20.1

[PATCH 3/3] dt-bindings: power: amlogic, meson-gx-pwrc: Add G12A compatible

[Neil Armstrong]

The Amlogic G12A has a slighly different Power Control, but uses the
same address space and sysctrl registers.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../devicetree/bindings/power/amlogic,meson-gx-pwrc.txt       | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
index 1cd050b4054c..0fdc3dd1125e 100644
--- a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
@@ -16,7 +16,9 @@ Device Tree Bindings:
 ---------------------
 
 Required properties:
-- compatible: should be "amlogic,meson-gx-pwrc-vpu" for the Meson GX SoCs
+- compatible: should be one of the following :
+	- "amlogic,meson-gx-pwrc-vpu" for the Meson GX SoCs
+	- "amlogic,meson-g12a-pwrc-vpu" for the Meson G12A SoCs
 - #power-domain-cells: should be 0
 - amlogic,hhi-sysctrl: phandle to the HHI sysctrl node
 - resets: phandles to the reset lines needed for this power demain sequence
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 3/3] dt-bindings: power: amlogic, meson-gx-pwrc: Add G12A compatible

[Neil Armstrong]

The Amlogic G12A has a slighly different Power Control, but uses the
same address space and sysctrl registers.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../devicetree/bindings/power/amlogic,meson-gx-pwrc.txt       | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
index 1cd050b4054c..0fdc3dd1125e 100644
--- a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
@@ -16,7 +16,9 @@ Device Tree Bindings:
 ---------------------
 
 Required properties:
-- compatible: should be "amlogic,meson-gx-pwrc-vpu" for the Meson GX SoCs
+- compatible: should be one of the following :
+	- "amlogic,meson-gx-pwrc-vpu" for the Meson GX SoCs
+	- "amlogic,meson-g12a-pwrc-vpu" for the Meson G12A SoCs
 - #power-domain-cells: should be 0
 - amlogic,hhi-sysctrl: phandle to the HHI sysctrl node
 - resets: phandles to the reset lines needed for this power demain sequence
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 3/3] dt-bindings: power: amlogic, meson-gx-pwrc: Add G12A compatible

[Neil Armstrong]

The Amlogic G12A has a slighly different Power Control, but uses the
same address space and sysctrl registers.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../devicetree/bindings/power/amlogic,meson-gx-pwrc.txt       | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
index 1cd050b4054c..0fdc3dd1125e 100644
--- a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
@@ -16,7 +16,9 @@ Device Tree Bindings:
 ---------------------
 
 Required properties:
-- compatible: should be "amlogic,meson-gx-pwrc-vpu" for the Meson GX SoCs
+- compatible: should be one of the following :
+	- "amlogic,meson-gx-pwrc-vpu" for the Meson GX SoCs
+	- "amlogic,meson-g12a-pwrc-vpu" for the Meson G12A SoCs
 - #power-domain-cells: should be 0
 - amlogic,hhi-sysctrl: phandle to the HHI sysctrl node
 - resets: phandles to the reset lines needed for this power demain sequence
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 3/3] dt-bindings: power: amlogic, meson-gx-pwrc: Add G12A compatible

[Rob Herring]

On Wed, 13 Mar 2019 15:10:30 +0100, Neil Armstrong wrote:
> The Amlogic G12A has a slighly different Power Control, but uses the
> same address space and sysctrl registers.
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  .../devicetree/bindings/power/amlogic,meson-gx-pwrc.txt       | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH 3/3] dt-bindings: power: amlogic, meson-gx-pwrc: Add G12A compatible

[Rob Herring]

On Wed, 13 Mar 2019 15:10:30 +0100, Neil Armstrong wrote:
> The Amlogic G12A has a slighly different Power Control, but uses the
> same address space and sysctrl registers.
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  .../devicetree/bindings/power/amlogic,meson-gx-pwrc.txt       | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 3/3] dt-bindings: power: amlogic, meson-gx-pwrc: Add G12A compatible

[Rob Herring]

On Wed, 13 Mar 2019 15:10:30 +0100, Neil Armstrong wrote:
> The Amlogic G12A has a slighly different Power Control, but uses the
> same address space and sysctrl registers.
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  .../devicetree/bindings/power/amlogic,meson-gx-pwrc.txt       | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/3] dt-bindings: power: amlogic, meson-gx-pwrc: Add G12A compatible

[Rob Herring]

On Wed, 13 Mar 2019 15:10:30 +0100, Neil Armstrong wrote:
> The Amlogic G12A has a slighly different Power Control, but uses the
> same address space and sysctrl registers.
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  .../devicetree/bindings/power/amlogic,meson-gx-pwrc.txt       | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 0/3] dt-bindings: meson: Add G12A display bindings

[Neil Armstrong]

On 13/03/2019 15:10, Neil Armstrong wrote:
> This patchset adds the G12A specific bindings for the Display VPU
> and VPU Power Control.
> 
> The Amlogic Meson G12A Display module is based on the Meson GXM SoC
> with an updated Plane Blender, thus VPU architecture and interconnect
> is the same.
> 
> Implementation then DT nodes will come in a further patchsets.
> 
> Neil Armstrong (3):
>   dt-bindings: display: amlogic,meson-vpu: Add G12A compatible and ports
>   dt-bindings: display: amlogic,meson-dw-hdmi: Add G12A compatible and
>     ports
>   dt-bindings: power: amlogic,meson-gx-pwrc: Add G12A compatible
> 
>  .../devicetree/bindings/display/amlogic,meson-dw-hdmi.txt     | 4 ++++
>  .../devicetree/bindings/display/amlogic,meson-vpu.txt         | 4 ++++
>  .../devicetree/bindings/power/amlogic,meson-gx-pwrc.txt       | 4 +++-
>  3 files changed, 11 insertions(+), 1 deletion(-)
> 

Kevin,

I applied Patches 1 & 2 to drm-misc-next, can you take Patch 3 along :
- https://patchwork.kernel.org/patch/10879285/
- https://patchwork.kernel.org/patch/10879293/

Thanks !
Neil

Re: [PATCH 0/3] dt-bindings: meson: Add G12A display bindings

[Neil Armstrong]

On 13/03/2019 15:10, Neil Armstrong wrote:
> This patchset adds the G12A specific bindings for the Display VPU
> and VPU Power Control.
> 
> The Amlogic Meson G12A Display module is based on the Meson GXM SoC
> with an updated Plane Blender, thus VPU architecture and interconnect
> is the same.
> 
> Implementation then DT nodes will come in a further patchsets.
> 
> Neil Armstrong (3):
>   dt-bindings: display: amlogic,meson-vpu: Add G12A compatible and ports
>   dt-bindings: display: amlogic,meson-dw-hdmi: Add G12A compatible and
>     ports
>   dt-bindings: power: amlogic,meson-gx-pwrc: Add G12A compatible
> 
>  .../devicetree/bindings/display/amlogic,meson-dw-hdmi.txt     | 4 ++++
>  .../devicetree/bindings/display/amlogic,meson-vpu.txt         | 4 ++++
>  .../devicetree/bindings/power/amlogic,meson-gx-pwrc.txt       | 4 +++-
>  3 files changed, 11 insertions(+), 1 deletion(-)
> 

Kevin,

I applied Patches 1 & 2 to drm-misc-next, can you take Patch 3 along :
- https://patchwork.kernel.org/patch/10879285/
- https://patchwork.kernel.org/patch/10879293/

Thanks !
Neil


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 0/3] dt-bindings: meson: Add G12A display bindings

[Neil Armstrong]

On 13/03/2019 15:10, Neil Armstrong wrote:
> This patchset adds the G12A specific bindings for the Display VPU
> and VPU Power Control.
> 
> The Amlogic Meson G12A Display module is based on the Meson GXM SoC
> with an updated Plane Blender, thus VPU architecture and interconnect
> is the same.
> 
> Implementation then DT nodes will come in a further patchsets.
> 
> Neil Armstrong (3):
>   dt-bindings: display: amlogic,meson-vpu: Add G12A compatible and ports
>   dt-bindings: display: amlogic,meson-dw-hdmi: Add G12A compatible and
>     ports
>   dt-bindings: power: amlogic,meson-gx-pwrc: Add G12A compatible
> 
>  .../devicetree/bindings/display/amlogic,meson-dw-hdmi.txt     | 4 ++++
>  .../devicetree/bindings/display/amlogic,meson-vpu.txt         | 4 ++++
>  .../devicetree/bindings/power/amlogic,meson-gx-pwrc.txt       | 4 +++-
>  3 files changed, 11 insertions(+), 1 deletion(-)
> 

Kevin,

I applied Patches 1 & 2 to drm-misc-next, can you take Patch 3 along :
- https://patchwork.kernel.org/patch/10879285/
- https://patchwork.kernel.org/patch/10879293/

Thanks !
Neil


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 0/3] dt-bindings: meson: Add G12A display bindings

[Neil Armstrong]

On 13/03/2019 15:10, Neil Armstrong wrote:
> This patchset adds the G12A specific bindings for the Display VPU
> and VPU Power Control.
> 
> The Amlogic Meson G12A Display module is based on the Meson GXM SoC
> with an updated Plane Blender, thus VPU architecture and interconnect
> is the same.
> 
> Implementation then DT nodes will come in a further patchsets.
> 
> Neil Armstrong (3):
>   dt-bindings: display: amlogic,meson-vpu: Add G12A compatible and ports
>   dt-bindings: display: amlogic,meson-dw-hdmi: Add G12A compatible and
>     ports
>   dt-bindings: power: amlogic,meson-gx-pwrc: Add G12A compatible
> 
>  .../devicetree/bindings/display/amlogic,meson-dw-hdmi.txt     | 4 ++++
>  .../devicetree/bindings/display/amlogic,meson-vpu.txt         | 4 ++++
>  .../devicetree/bindings/power/amlogic,meson-gx-pwrc.txt       | 4 +++-
>  3 files changed, 11 insertions(+), 1 deletion(-)
> 

Kevin,

I applied Patches 1 & 2 to drm-misc-next, can you take Patch 3 along :
- https://patchwork.kernel.org/patch/10879285/
- https://patchwork.kernel.org/patch/10879293/

Thanks !
Neil

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 0/3] dt-bindings: meson: Add G12A display bindings

[Kevin Hilman]

Neil Armstrong <narmstrong@baylibre.com> writes:

> On 13/03/2019 15:10, Neil Armstrong wrote:
>> This patchset adds the G12A specific bindings for the Display VPU
>> and VPU Power Control.
>> 
>> The Amlogic Meson G12A Display module is based on the Meson GXM SoC
>> with an updated Plane Blender, thus VPU architecture and interconnect
>> is the same.
>> 
>> Implementation then DT nodes will come in a further patchsets.
>> 
>> Neil Armstrong (3):
>>   dt-bindings: display: amlogic,meson-vpu: Add G12A compatible and ports
>>   dt-bindings: display: amlogic,meson-dw-hdmi: Add G12A compatible and
>>     ports
>>   dt-bindings: power: amlogic,meson-gx-pwrc: Add G12A compatible
>> 
>>  .../devicetree/bindings/display/amlogic,meson-dw-hdmi.txt     | 4 ++++
>>  .../devicetree/bindings/display/amlogic,meson-vpu.txt         | 4 ++++
>>  .../devicetree/bindings/power/amlogic,meson-gx-pwrc.txt       | 4 +++-
>>  3 files changed, 11 insertions(+), 1 deletion(-)
>> 
>
> Kevin,
>
> I applied Patches 1 & 2 to drm-misc-next, can you take Patch 3 along :

Queued for v5.2,

Thanks,

Kevin

Re: [PATCH 0/3] dt-bindings: meson: Add G12A display bindings

[Kevin Hilman]

Neil Armstrong <narmstrong@baylibre.com> writes:

> On 13/03/2019 15:10, Neil Armstrong wrote:
>> This patchset adds the G12A specific bindings for the Display VPU
>> and VPU Power Control.
>> 
>> The Amlogic Meson G12A Display module is based on the Meson GXM SoC
>> with an updated Plane Blender, thus VPU architecture and interconnect
>> is the same.
>> 
>> Implementation then DT nodes will come in a further patchsets.
>> 
>> Neil Armstrong (3):
>>   dt-bindings: display: amlogic,meson-vpu: Add G12A compatible and ports
>>   dt-bindings: display: amlogic,meson-dw-hdmi: Add G12A compatible and
>>     ports
>>   dt-bindings: power: amlogic,meson-gx-pwrc: Add G12A compatible
>> 
>>  .../devicetree/bindings/display/amlogic,meson-dw-hdmi.txt     | 4 ++++
>>  .../devicetree/bindings/display/amlogic,meson-vpu.txt         | 4 ++++
>>  .../devicetree/bindings/power/amlogic,meson-gx-pwrc.txt       | 4 +++-
>>  3 files changed, 11 insertions(+), 1 deletion(-)
>> 
>
> Kevin,
>
> I applied Patches 1 & 2 to drm-misc-next, can you take Patch 3 along :

Queued for v5.2,

Thanks,

Kevin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 0/3] dt-bindings: meson: Add G12A display bindings

[Kevin Hilman]

Neil Armstrong <narmstrong@baylibre.com> writes:

> On 13/03/2019 15:10, Neil Armstrong wrote:
>> This patchset adds the G12A specific bindings for the Display VPU
>> and VPU Power Control.
>> 
>> The Amlogic Meson G12A Display module is based on the Meson GXM SoC
>> with an updated Plane Blender, thus VPU architecture and interconnect
>> is the same.
>> 
>> Implementation then DT nodes will come in a further patchsets.
>> 
>> Neil Armstrong (3):
>>   dt-bindings: display: amlogic,meson-vpu: Add G12A compatible and ports
>>   dt-bindings: display: amlogic,meson-dw-hdmi: Add G12A compatible and
>>     ports
>>   dt-bindings: power: amlogic,meson-gx-pwrc: Add G12A compatible
>> 
>>  .../devicetree/bindings/display/amlogic,meson-dw-hdmi.txt     | 4 ++++
>>  .../devicetree/bindings/display/amlogic,meson-vpu.txt         | 4 ++++
>>  .../devicetree/bindings/power/amlogic,meson-gx-pwrc.txt       | 4 +++-
>>  3 files changed, 11 insertions(+), 1 deletion(-)
>> 
>
> Kevin,
>
> I applied Patches 1 & 2 to drm-misc-next, can you take Patch 3 along :

Queued for v5.2,

Thanks,

Kevin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel