* [PATCH v3 1/1] iommu: Add config option to set lazy mode as default
@ 2019-03-29 2:54 Zhen Lei
2019-03-30 10:43 ` Leizhen (ThunderTown)
0 siblings, 1 reply; 2+ messages in thread
From: Zhen Lei @ 2019-03-29 2:54 UTC (permalink / raw)
To: Jean-Philippe Brucker, John Garry, Robin Murphy, Will Deacon,
Joerg Roedel, iommu, linux-kernel
Cc: Zhen Lei, S390, Hanjun Guo
This allows the default behaviour to be controlled by a kernel config
option instead of changing the command line for the kernel to include
"iommu.strict=0" on ARM64 where this is desired.
This is similar to CONFIG_IOMMU_DEFAULT_PASSTHROUGH.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
arch/s390/pci/pci_dma.c | 4 ++++
drivers/iommu/Kconfig | 15 +++++++++++++++
drivers/iommu/amd_iommu_init.c | 6 +++++-
drivers/iommu/intel-iommu.c | 4 ++++
drivers/iommu/iommu.c | 5 +++++
5 files changed, 33 insertions(+), 1 deletion(-)
diff --git a/arch/s390/pci/pci_dma.c b/arch/s390/pci/pci_dma.c
index 9e52d1527f71495..d05e8c3820793c5 100644
--- a/arch/s390/pci/pci_dma.c
+++ b/arch/s390/pci/pci_dma.c
@@ -17,7 +17,11 @@
static struct kmem_cache *dma_region_table_cache;
static struct kmem_cache *dma_page_table_cache;
+#ifdef CONFIG_IOMMU_DMA_DEFAULT_LAZY_MODE
static int s390_iommu_strict;
+#else
+static int s390_iommu_strict = 1;
+#endif
static int zpci_refresh_global(struct zpci_dev *zdev)
{
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 6f07f3b21816c64..ed5206a2d316599 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -85,6 +85,21 @@ config IOMMU_DEFAULT_PASSTHROUGH
If unsure, say N here.
+config IOMMU_DMA_DEFAULT_LAZY_MODE
+ bool "IOMMU DMA use lazy mode to flush IOTLB and free IOVA"
+ depends on IOMMU_API
+ default y
+ help
+ Support lazy mode, where for every IOMMU DMA unmap operation, the
+ flush operation of IOTLB and the free operation of IOVA are deferred.
+ They are only guaranteed to be done before the related IOVA will be
+ reused. Removing the need to pass in kernel parameters through
+ command line. For example, iommu.strict=0 on ARM64. If this is
+ enabled, you can still disable with kernel parameters, such as
+ iommu.strict=1 depending on the architecture.
+
+ If unsure, say N here.
+
config OF_IOMMU
def_bool y
depends on OF && IOMMU_API
diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
index f773792d77fd533..a30805c2f77199c 100644
--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -166,7 +166,11 @@ struct ivmd_header {
to handle */
LIST_HEAD(amd_iommu_unity_map); /* a list of required unity mappings
we find in ACPI */
-bool amd_iommu_unmap_flush; /* if true, flush on every unmap */
+#ifdef CONFIG_IOMMU_DMA_DEFAULT_LAZY_MODE
+bool amd_iommu_unmap_flush;
+#else
+bool amd_iommu_unmap_flush = true; /* flush on every unmap */
+#endif
LIST_HEAD(amd_iommu_list); /* list of all AMD IOMMUs in the
system */
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index 28cb713d728ceef..560191a9342b2b8 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -362,7 +362,11 @@ static int domain_detach_iommu(struct dmar_domain *domain,
static int dmar_map_gfx = 1;
static int dmar_forcedac;
+#ifdef CONFIG_IOMMU_DMA_DEFAULT_LAZY_MODE
static int intel_iommu_strict;
+#else
+static int intel_iommu_strict = 1;
+#endif
static int intel_iommu_superpage = 1;
static int intel_iommu_sm;
static int iommu_identity_mapping;
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index 33a982e33716369..5acb98e79b5b32d 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -43,7 +43,12 @@
#else
static unsigned int iommu_def_domain_type = IOMMU_DOMAIN_DMA;
#endif
+
+#ifdef CONFIG_IOMMU_DMA_DEFAULT_LAZY_MODE
+static bool iommu_dma_strict __read_mostly;
+#else
static bool iommu_dma_strict __read_mostly = true;
+#endif
struct iommu_callback_data {
const struct iommu_ops *ops;
--
1.8.3
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v3 1/1] iommu: Add config option to set lazy mode as default
2019-03-29 2:54 [PATCH v3 1/1] iommu: Add config option to set lazy mode as default Zhen Lei
@ 2019-03-30 10:43 ` Leizhen (ThunderTown)
0 siblings, 0 replies; 2+ messages in thread
From: Leizhen (ThunderTown) @ 2019-03-30 10:43 UTC (permalink / raw)
To: Jean-Philippe Brucker, John Garry, Robin Murphy, Will Deacon,
Joerg Roedel, iommu, linux-kernel
Cc: S390, Hanjun Guo
On 2019/3/29 10:54, Zhen Lei wrote:
> This allows the default behaviour to be controlled by a kernel config
> option instead of changing the command line for the kernel to include
> "iommu.strict=0" on ARM64 where this is desired.
>
> This is similar to CONFIG_IOMMU_DEFAULT_PASSTHROUGH.
>
> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
> ---
> arch/s390/pci/pci_dma.c | 4 ++++
> drivers/iommu/Kconfig | 15 +++++++++++++++
> drivers/iommu/amd_iommu_init.c | 6 +++++-
> drivers/iommu/intel-iommu.c | 4 ++++
> drivers/iommu/iommu.c | 5 +++++
> 5 files changed, 33 insertions(+), 1 deletion(-)
>
> diff --git a/arch/s390/pci/pci_dma.c b/arch/s390/pci/pci_dma.c
> index 9e52d1527f71495..d05e8c3820793c5 100644
> --- a/arch/s390/pci/pci_dma.c
> +++ b/arch/s390/pci/pci_dma.c
> @@ -17,7 +17,11 @@
>
> static struct kmem_cache *dma_region_table_cache;
> static struct kmem_cache *dma_page_table_cache;
> +#ifdef CONFIG_IOMMU_DMA_DEFAULT_LAZY_MODE
> static int s390_iommu_strict;
> +#else
> +static int s390_iommu_strict = 1;
> +#endif
>
> static int zpci_refresh_global(struct zpci_dev *zdev)
> {
> diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
> index 6f07f3b21816c64..ed5206a2d316599 100644
> --- a/drivers/iommu/Kconfig
> +++ b/drivers/iommu/Kconfig
> @@ -85,6 +85,21 @@ config IOMMU_DEFAULT_PASSTHROUGH
>
> If unsure, say N here.
>
> +config IOMMU_DMA_DEFAULT_LAZY_MODE
> + bool "IOMMU DMA use lazy mode to flush IOTLB and free IOVA"
> + depends on IOMMU_API
> + default y
Hi Robin:
Should I change to:
+ default y if !(ARM_SMMU || ARM_SMMU_V3)
> + help
> + Support lazy mode, where for every IOMMU DMA unmap operation, the
> + flush operation of IOTLB and the free operation of IOVA are deferred.
> + They are only guaranteed to be done before the related IOVA will be
> + reused. Removing the need to pass in kernel parameters through
> + command line. For example, iommu.strict=0 on ARM64. If this is
> + enabled, you can still disable with kernel parameters, such as
> + iommu.strict=1 depending on the architecture.
> +
> + If unsure, say N here.
> +
> config OF_IOMMU
> def_bool y
> depends on OF && IOMMU_API
> diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
> index f773792d77fd533..a30805c2f77199c 100644
> --- a/drivers/iommu/amd_iommu_init.c
> +++ b/drivers/iommu/amd_iommu_init.c
> @@ -166,7 +166,11 @@ struct ivmd_header {
> to handle */
> LIST_HEAD(amd_iommu_unity_map); /* a list of required unity mappings
> we find in ACPI */
> -bool amd_iommu_unmap_flush; /* if true, flush on every unmap */
> +#ifdef CONFIG_IOMMU_DMA_DEFAULT_LAZY_MODE
> +bool amd_iommu_unmap_flush;
> +#else
> +bool amd_iommu_unmap_flush = true; /* flush on every unmap */
> +#endif
>
> LIST_HEAD(amd_iommu_list); /* list of all AMD IOMMUs in the
> system */
> diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
> index 28cb713d728ceef..560191a9342b2b8 100644
> --- a/drivers/iommu/intel-iommu.c
> +++ b/drivers/iommu/intel-iommu.c
> @@ -362,7 +362,11 @@ static int domain_detach_iommu(struct dmar_domain *domain,
>
> static int dmar_map_gfx = 1;
> static int dmar_forcedac;
> +#ifdef CONFIG_IOMMU_DMA_DEFAULT_LAZY_MODE
> static int intel_iommu_strict;
> +#else
> +static int intel_iommu_strict = 1;
> +#endif
> static int intel_iommu_superpage = 1;
> static int intel_iommu_sm;
> static int iommu_identity_mapping;
> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
> index 33a982e33716369..5acb98e79b5b32d 100644
> --- a/drivers/iommu/iommu.c
> +++ b/drivers/iommu/iommu.c
> @@ -43,7 +43,12 @@
> #else
> static unsigned int iommu_def_domain_type = IOMMU_DOMAIN_DMA;
> #endif
> +
> +#ifdef CONFIG_IOMMU_DMA_DEFAULT_LAZY_MODE
> +static bool iommu_dma_strict __read_mostly;
> +#else
> static bool iommu_dma_strict __read_mostly = true;
> +#endif
>
> struct iommu_callback_data {
> const struct iommu_ops *ops;
>
--
Thanks!
BestRegards
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-03-30 10:43 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-03-29 2:54 [PATCH v3 1/1] iommu: Add config option to set lazy mode as default Zhen Lei
2019-03-30 10:43 ` Leizhen (ThunderTown)
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.