From: laurentiu.tudor@nxp.com
To: netdev@vger.kernel.org, madalin.bucur@nxp.com,
roy.pledge@nxp.com, camelia.groza@nxp.com, leoyang.li@nxp.com
Cc: davem@davemloft.net, iommu@lists.linux-foundation.org,
linux-arm-kernel@lists.infradead.org,
linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
Laurentiu Tudor <laurentiu.tudor@nxp.com>
Subject: [PATCH 00/13] Prerequisites for NXP LS104xA SMMU enablement
Date: Fri, 29 Mar 2019 16:00:01 +0200 [thread overview]
Message-ID: <20190329140014.8126-1-laurentiu.tudor@nxp.com> (raw)
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
This patch series contains several fixes in preparation for SMMU
support on NXP LS1043A and LS1046A chips. Once these get picked up,
I'll submit the actual SMMU enablement patches consisting in the
required device tree changes.
This patch series contains only part of the previously submitted one,
(including also the device tree changes) available here:
https://patchwork.kernel.org/cover/10634443/
There are a couple of changes/fixes since then:
- for consistency, renamed mmu node to smmu
- new patch page aligning the sizes of the qbman reserved memory
- rebased on 5.1.0-rc2
Laurentiu Tudor (13):
soc/fsl/qman: fixup liodns only on ppc targets
soc/fsl/bman: map FBPR area in the iommu
soc/fsl/qman: map FQD and PFDR areas in the iommu
soc/fsl/qman-portal: map CENA area in the iommu
soc/fsl/bqman: page align iommu mapping sizes
soc/fsl/qbman_portals: add APIs to retrieve the probing status
fsl/fman: backup and restore ICID registers
fsl/fman: add API to get the device behind a fman port
dpaa_eth: defer probing after qbman
dpaa_eth: base dma mappings on the fman rx port
dpaa_eth: fix iova handling for contiguous frames
dpaa_eth: fix iova handling for sg frames
dpaa_eth: fix SG frame cleanup
.../net/ethernet/freescale/dpaa/dpaa_eth.c | 136 ++++++++++++------
drivers/net/ethernet/freescale/fman/fman.c | 35 ++++-
drivers/net/ethernet/freescale/fman/fman.h | 4 +
.../net/ethernet/freescale/fman/fman_port.c | 14 ++
.../net/ethernet/freescale/fman/fman_port.h | 2 +
drivers/soc/fsl/qbman/bman_ccsr.c | 11 ++
drivers/soc/fsl/qbman/bman_portal.c | 22 ++-
drivers/soc/fsl/qbman/qman_ccsr.c | 17 +++
drivers/soc/fsl/qbman/qman_portal.c | 40 +++++-
include/soc/fsl/bman.h | 8 ++
include/soc/fsl/qman.h | 9 ++
11 files changed, 242 insertions(+), 56 deletions(-)
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: laurentiu.tudor@nxp.com
To: netdev@vger.kernel.org, madalin.bucur@nxp.com,
roy.pledge@nxp.com, camelia.groza@nxp.com, leoyang.li@nxp.com
Cc: linux-kernel@vger.kernel.org, iommu@lists.linux-foundation.org,
linuxppc-dev@lists.ozlabs.org, davem@davemloft.net,
linux-arm-kernel@lists.infradead.org,
Laurentiu Tudor <laurentiu.tudor@nxp.com>
Subject: [PATCH 00/13] Prerequisites for NXP LS104xA SMMU enablement
Date: Fri, 29 Mar 2019 16:00:01 +0200 [thread overview]
Message-ID: <20190329140014.8126-1-laurentiu.tudor@nxp.com> (raw)
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
This patch series contains several fixes in preparation for SMMU
support on NXP LS1043A and LS1046A chips. Once these get picked up,
I'll submit the actual SMMU enablement patches consisting in the
required device tree changes.
This patch series contains only part of the previously submitted one,
(including also the device tree changes) available here:
https://patchwork.kernel.org/cover/10634443/
There are a couple of changes/fixes since then:
- for consistency, renamed mmu node to smmu
- new patch page aligning the sizes of the qbman reserved memory
- rebased on 5.1.0-rc2
Laurentiu Tudor (13):
soc/fsl/qman: fixup liodns only on ppc targets
soc/fsl/bman: map FBPR area in the iommu
soc/fsl/qman: map FQD and PFDR areas in the iommu
soc/fsl/qman-portal: map CENA area in the iommu
soc/fsl/bqman: page align iommu mapping sizes
soc/fsl/qbman_portals: add APIs to retrieve the probing status
fsl/fman: backup and restore ICID registers
fsl/fman: add API to get the device behind a fman port
dpaa_eth: defer probing after qbman
dpaa_eth: base dma mappings on the fman rx port
dpaa_eth: fix iova handling for contiguous frames
dpaa_eth: fix iova handling for sg frames
dpaa_eth: fix SG frame cleanup
.../net/ethernet/freescale/dpaa/dpaa_eth.c | 136 ++++++++++++------
drivers/net/ethernet/freescale/fman/fman.c | 35 ++++-
drivers/net/ethernet/freescale/fman/fman.h | 4 +
.../net/ethernet/freescale/fman/fman_port.c | 14 ++
.../net/ethernet/freescale/fman/fman_port.h | 2 +
drivers/soc/fsl/qbman/bman_ccsr.c | 11 ++
drivers/soc/fsl/qbman/bman_portal.c | 22 ++-
drivers/soc/fsl/qbman/qman_ccsr.c | 17 +++
drivers/soc/fsl/qbman/qman_portal.c | 40 +++++-
include/soc/fsl/bman.h | 8 ++
include/soc/fsl/qman.h | 9 ++
11 files changed, 242 insertions(+), 56 deletions(-)
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: laurentiu.tudor@nxp.com
To: netdev@vger.kernel.org, madalin.bucur@nxp.com,
roy.pledge@nxp.com, camelia.groza@nxp.com, leoyang.li@nxp.com
Cc: linux-kernel@vger.kernel.org, iommu@lists.linux-foundation.org,
linuxppc-dev@lists.ozlabs.org, davem@davemloft.net,
linux-arm-kernel@lists.infradead.org,
Laurentiu Tudor <laurentiu.tudor@nxp.com>
Subject: [PATCH 00/13] Prerequisites for NXP LS104xA SMMU enablement
Date: Fri, 29 Mar 2019 16:00:01 +0200 [thread overview]
Message-ID: <20190329140014.8126-1-laurentiu.tudor@nxp.com> (raw)
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
This patch series contains several fixes in preparation for SMMU
support on NXP LS1043A and LS1046A chips. Once these get picked up,
I'll submit the actual SMMU enablement patches consisting in the
required device tree changes.
This patch series contains only part of the previously submitted one,
(including also the device tree changes) available here:
https://patchwork.kernel.org/cover/10634443/
There are a couple of changes/fixes since then:
- for consistency, renamed mmu node to smmu
- new patch page aligning the sizes of the qbman reserved memory
- rebased on 5.1.0-rc2
Laurentiu Tudor (13):
soc/fsl/qman: fixup liodns only on ppc targets
soc/fsl/bman: map FBPR area in the iommu
soc/fsl/qman: map FQD and PFDR areas in the iommu
soc/fsl/qman-portal: map CENA area in the iommu
soc/fsl/bqman: page align iommu mapping sizes
soc/fsl/qbman_portals: add APIs to retrieve the probing status
fsl/fman: backup and restore ICID registers
fsl/fman: add API to get the device behind a fman port
dpaa_eth: defer probing after qbman
dpaa_eth: base dma mappings on the fman rx port
dpaa_eth: fix iova handling for contiguous frames
dpaa_eth: fix iova handling for sg frames
dpaa_eth: fix SG frame cleanup
.../net/ethernet/freescale/dpaa/dpaa_eth.c | 136 ++++++++++++------
drivers/net/ethernet/freescale/fman/fman.c | 35 ++++-
drivers/net/ethernet/freescale/fman/fman.h | 4 +
.../net/ethernet/freescale/fman/fman_port.c | 14 ++
.../net/ethernet/freescale/fman/fman_port.h | 2 +
drivers/soc/fsl/qbman/bman_ccsr.c | 11 ++
drivers/soc/fsl/qbman/bman_portal.c | 22 ++-
drivers/soc/fsl/qbman/qman_ccsr.c | 17 +++
drivers/soc/fsl/qbman/qman_portal.c | 40 +++++-
include/soc/fsl/bman.h | 8 ++
include/soc/fsl/qman.h | 9 ++
11 files changed, 242 insertions(+), 56 deletions(-)
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-03-29 14:00 UTC|newest]
Thread overview: 90+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-29 14:00 laurentiu.tudor [this message]
2019-03-29 14:00 ` [PATCH 00/13] Prerequisites for NXP LS104xA SMMU enablement laurentiu.tudor
2019-03-29 14:00 ` laurentiu.tudor
2019-03-29 14:00 ` [PATCH 01/13] soc/fsl/qman: fixup liodns only on ppc targets laurentiu.tudor
2019-03-29 14:00 ` laurentiu.tudor
2019-03-29 14:00 ` laurentiu.tudor
2019-03-29 21:50 ` Li Yang
2019-03-29 21:50 ` Li Yang
2019-03-29 21:50 ` Li Yang
2019-03-29 21:50 ` Li Yang
2019-04-01 10:21 ` Laurentiu Tudor
2019-04-01 10:21 ` Laurentiu Tudor
2019-04-01 10:21 ` Laurentiu Tudor
2019-04-01 10:21 ` Laurentiu Tudor
2019-03-29 14:00 ` [PATCH 02/13] soc/fsl/bman: map FBPR area in the iommu laurentiu.tudor
2019-03-29 14:00 ` laurentiu.tudor
2019-03-29 14:00 ` laurentiu.tudor
2019-03-29 14:50 ` Robin Murphy
2019-03-29 14:50 ` Robin Murphy
2019-03-29 14:50 ` Robin Murphy
2019-04-01 11:04 ` Laurentiu Tudor
2019-04-01 11:04 ` Laurentiu Tudor
2019-04-01 11:04 ` Laurentiu Tudor
2019-04-01 11:04 ` Laurentiu Tudor
2019-04-19 13:41 ` Laurentiu Tudor
2019-04-19 13:41 ` Laurentiu Tudor
2019-04-19 13:41 ` Laurentiu Tudor
2019-04-19 13:41 ` Laurentiu Tudor
2019-04-19 13:41 ` Laurentiu Tudor
2019-03-29 21:16 ` Li Yang
2019-03-29 21:16 ` Li Yang
2019-03-29 21:16 ` Li Yang
2019-03-29 21:16 ` Li Yang
2019-04-01 11:15 ` Laurentiu Tudor
2019-04-01 11:15 ` Laurentiu Tudor
2019-04-01 11:15 ` Laurentiu Tudor
2019-04-01 11:15 ` Laurentiu Tudor
2019-03-29 14:00 ` [PATCH 03/13] soc/fsl/qman: map FQD and PFDR areas " laurentiu.tudor
2019-03-29 14:00 ` laurentiu.tudor
2019-03-29 14:00 ` laurentiu.tudor
2019-03-29 14:00 ` [PATCH 04/13] soc/fsl/qman-portal: map CENA area " laurentiu.tudor
2019-03-29 14:00 ` laurentiu.tudor
2019-03-29 14:00 ` laurentiu.tudor
2019-03-29 14:00 ` [PATCH 05/13] soc/fsl/bqman: page align iommu mapping sizes laurentiu.tudor
2019-03-29 14:00 ` laurentiu.tudor
2019-03-29 14:00 ` laurentiu.tudor
2019-03-29 22:06 ` Li Yang
2019-03-29 22:06 ` Li Yang
2019-03-29 22:06 ` Li Yang
2019-03-29 22:06 ` Li Yang
2019-04-01 10:18 ` Laurentiu Tudor
2019-04-01 10:18 ` Laurentiu Tudor
2019-04-01 10:18 ` Laurentiu Tudor
2019-04-01 10:18 ` Laurentiu Tudor
2019-03-29 14:00 ` [PATCH 06/13] soc/fsl/qbman_portals: add APIs to retrieve the probing status laurentiu.tudor
2019-03-29 14:00 ` laurentiu.tudor
2019-03-29 14:00 ` laurentiu.tudor
2019-04-01 22:12 ` Li Yang
2019-04-01 22:12 ` Li Yang
2019-04-01 22:12 ` Li Yang
2019-04-01 22:12 ` Li Yang
2019-03-29 14:00 ` [PATCH 07/13] fsl/fman: backup and restore ICID registers laurentiu.tudor
2019-03-29 14:00 ` laurentiu.tudor
2019-03-29 14:00 ` laurentiu.tudor
2019-03-29 14:00 ` [PATCH 08/13] fsl/fman: add API to get the device behind a fman port laurentiu.tudor
2019-03-29 14:00 ` laurentiu.tudor
2019-03-29 14:00 ` laurentiu.tudor
2019-03-29 14:00 ` [PATCH 09/13] dpaa_eth: defer probing after qbman laurentiu.tudor
2019-03-29 14:00 ` laurentiu.tudor
2019-03-29 14:00 ` laurentiu.tudor
2019-03-29 14:00 ` [PATCH 10/13] dpaa_eth: base dma mappings on the fman rx port laurentiu.tudor
2019-03-29 14:00 ` laurentiu.tudor
2019-03-29 14:00 ` laurentiu.tudor
2019-03-29 14:00 ` [PATCH 11/13] dpaa_eth: fix iova handling for contiguous frames laurentiu.tudor
2019-03-29 14:00 ` laurentiu.tudor
2019-03-29 14:00 ` laurentiu.tudor
2019-03-29 14:00 ` [PATCH 12/13] dpaa_eth: fix iova handling for sg frames laurentiu.tudor
2019-03-29 14:00 ` laurentiu.tudor
2019-03-29 14:00 ` laurentiu.tudor
2019-03-29 14:00 ` [PATCH 13/13] dpaa_eth: fix SG frame cleanup laurentiu.tudor
2019-03-29 14:00 ` laurentiu.tudor
2019-03-29 14:00 ` laurentiu.tudor
2019-03-29 15:25 ` Joakim Tjernlund
2019-03-29 15:25 ` Joakim Tjernlund
2019-03-29 15:25 ` Joakim Tjernlund
2019-03-29 15:25 ` Joakim Tjernlund
2019-04-01 10:41 ` Laurentiu Tudor
2019-04-01 10:41 ` Laurentiu Tudor
2019-04-01 10:41 ` Laurentiu Tudor
2019-04-01 10:41 ` Laurentiu Tudor
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190329140014.8126-1-laurentiu.tudor@nxp.com \
--to=laurentiu.tudor@nxp.com \
--cc=camelia.groza@nxp.com \
--cc=davem@davemloft.net \
--cc=iommu@lists.linux-foundation.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=madalin.bucur@nxp.com \
--cc=netdev@vger.kernel.org \
--cc=roy.pledge@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.