From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
To: Kyle Tso <kyletso@google.com>
Cc: linux@roeck-us.net, gregkh@linuxfoundation.org,
badhri@google.com, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] usb: typec: tcpm: collision avoidance
Date: Thu, 4 Apr 2019 17:13:45 +0300 [thread overview]
Message-ID: <20190404141345.GF21319@kuha.fi.intel.com> (raw)
In-Reply-To: <20190322121745.159768-1-kyletso@google.com>
Hi,
On Fri, Mar 22, 2019 at 08:17:45PM +0800, Kyle Tso wrote:
> This patch provides the implementation of Collision Avoidance introduced
> in PD3.0. The start of each Atomic Message Sequence (AMS) initiated by
> the port will be denied if the current AMS is not interruptible. The
> Source port will set the CC to SinkTxNG if it is going to initiate an
> AMS, and SinkTxOk otherwise. Meanwhile, any AMS initiated by a Sink port
> will be denied in TCPM if the port partner (Source) sets SinkTxNG except
> for HARD_RESET and SOFT_RESET.
I tested this with my GDBWin which has fusb302. When I plug-in
DisplayPort adapter, the partner device never gets registered, and I
see steady flow of warnings from fusb302:
[ 693.391176] Vconn is on during toggle start
[ 693.391250] WARNING: CPU: 2 PID: 30 at drivers/usb/typec/tcpm/fusb302.c:562 fusb302_set_toggling+0x129/0x130 [fusb302]
[ 693.400293] Modules linked in: intel_xhci_usb_role_switch fusb302 tcpm roles pi3usb30532 i915 typec intel_gtt intel_cht_int33fe
[ 693.406309] CPU: 2 PID: 30 Comm: kworker/u8:1 Tainted: G W 5.1.0-rc3-heikki+ #17
[ 693.408434] cht_wcove_pwrsrc cht_wcove_pwrsrc: Could not detect charger type
[ 693.412278] Hardware name: Default string Default string/Default string, BIOS 5.11 05/25/2017
[ 693.412283] Workqueue: i2c-fusb302 tcpm_state_machine_work [tcpm]
[ 693.424256] RIP: 0010:fusb302_set_toggling+0x129/0x130 [fusb302]
[ 693.427234] Code: 89 df e8 da ef ff ff 85 c0 78 c6 c6 83 b0 01 00 00 00 eb b7 b9 02 00 00 00 e9 48 ff ff ff 48 c7 c7 20 e8 21 a0 e8 8e 0c e4 e0 <0f> 0b e9 58 ff ff ff 41 55 4c 8d 6f e8 41 54 41 89 f4 55 53 48 8d
[ 693.436204] RSP: 0000:ffffc9000076bd90 EFLAGS: 00010286
[ 693.439174] RAX: 0000000000000000 RBX: ffff888178080028 RCX: 0000000000000000
[ 693.442157] RDX: 000000000000001f RSI: ffffffff8259051f RDI: ffffffff8259091f
[ 693.445130] RBP: 0000000000000003 R08: ffffffff82590500 R09: 00000000000202c0
[ 693.448100] R10: 0000010cb24a3d18 R11: 000000000000001e R12: ffff8881780801b0
[ 693.451086] R13: ffffffffa021e4e5 R14: 0000000000000003 R15: ffff888178080040
[ 693.454060] FS: 0000000000000000(0000) GS:ffff88817bb00000(0000) knlGS:0000000000000000
[ 693.460009] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 693.462984] CR2: 00000000f7fb74a0 CR3: 000000000200d000 CR4: 00000000001006e0
[ 693.465969] Call Trace:
[ 693.468937] tcpm_set_cc+0xb9/0x170 [fusb302]
[ 693.471894] tcpm_ams_start+0x1b8/0x2a0 [tcpm]
[ 693.474855] ? _cond_resched+0x10/0x20
[ 693.477807] tcpm_state_machine_work+0x57e/0x28f6 [tcpm]
[ 693.480776] ? tcpm_pd_event_handler+0x111/0x320 [tcpm]
[ 693.483743] process_one_work+0x1da/0x410
[ 693.486703] worker_thread+0x28/0x3c0
[ 693.489651] ? process_one_work+0x410/0x410
[ 693.492603] kthread+0x10b/0x130
[ 693.495548] ? kthread_create_on_node+0x60/0x60
[ 693.498506] ret_from_fork+0x1f/0x30
Here's the tcpm debugfs log:
[ 692.553000] CC1: 0 -> 2, CC2: 0 -> 1 [state DRP_TOGGLING, polarity 0, connected]
[ 692.553016] state change DRP_TOGGLING -> SRC_ATTACH_WAIT
[ 692.553056] pending state change SRC_ATTACH_WAIT -> SNK_TRY @ 200 ms
[ 692.757402] state change SRC_ATTACH_WAIT -> SNK_TRY [delayed 200 ms]
[ 692.757410] cc:=2
[ 692.761946] pending state change SNK_TRY -> SNK_TRY_WAIT @ 100 ms
[ 692.869308] state change SNK_TRY -> SNK_TRY_WAIT [delayed 100 ms]
[ 692.869313] state change SNK_TRY_WAIT -> SRC_TRYWAIT
[ 692.869317] cc:=3
[ 692.873657] pending state change SRC_TRYWAIT -> SRC_TRYWAIT_UNATTACHED @ 100 ms
[ 692.882524] CC1: 2 -> 2, CC2: 1 -> 1 [state SRC_TRYWAIT, polarity 0, connected]
[ 692.882537] state change SRC_TRYWAIT -> SRC_TRYWAIT_DEBOUNCE
[ 692.882567] pending state change SRC_TRYWAIT_DEBOUNCE -> SRC_ATTACHED @ 200 ms
[ 693.085337] state change SRC_TRYWAIT_DEBOUNCE -> SRC_ATTACHED [delayed 200 ms]
[ 693.085347] polarity 0
[ 693.085352] Requesting mux state 1, usb-role 1, orientation 1
[ 693.346845] vconn:=1
[ 693.347174] vbus:=1 charge=0
[ 693.358340] pending state change SRC_ATTACHED -> SRC_UNATTACHED @ 480 ms
[ 693.378702] VBUS on
[ 693.378711] state change SRC_ATTACHED -> SRC_STARTUP
[ 693.378741] AMS POWER_NEGOTIATION start
[ 693.378745] cc:=4
[ 693.505321] state change SRC_STARTUP -> AMS_START in AMS POWER_NEGOTIATION
[ 693.505325] state change AMS_START -> SRC_SEND_CAPABILITIES in AMS POWER_NEGOTIATION
[ 693.505327] PD TX, header: 0x11a1
[ 693.613296] pending state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES @ 150 ms in AMS POWER_NEGOTIATION
[ 693.613309] CC1: 2 -> 2, CC2: 1 -> 1 [state SRC_SEND_CAPABILITIES, polarity 0, connected]
[ 693.765730] state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES [delayed 150 ms]
[ 693.765753] PD TX, header: 0x11a1
[ 693.770016] PD TX complete, status: 0
[ 693.770261] pending state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES_TIMEOUT @ 150 ms in AMS POWER_NEGOTIATION
[ 693.775178] PD RX, header: 0x1042 [1]
[ 693.775195] state change SRC_SEND_CAPABILITIES -> SRC_NEGOTIATE_CAPABILITIES
[ 693.775236] Requested 5000 mV, 400 mA for 400 / 900 mA
[ 693.775244] PD TX, header: 0x363
[ 693.778253] PD TX complete, status: 0
[ 693.778363] pending state change SRC_NEGOTIATE_CAPABILITIES -> SRC_TRANSITION_SUPPLY @ 35 ms
[ 693.803463] Received hard reset
[ 693.803473] state change SRC_NEGOTIATE_CAPABILITIES -> HARD_RESET_START
[ 693.806323] pending state change HARD_RESET_START -> SRC_HARD_RESET_VBUS_OFF @ 30 ms
[ 693.837400] state change HARD_RESET_START -> SRC_HARD_RESET_VBUS_OFF [delayed 30 ms]
[ 693.837414] vconn:=1
[ 693.837426] vbus:=0 charge=0
[ 693.843380] Requesting mux state 1, usb-role 1, orientation 1
[ 693.844554] pending state change SRC_HARD_RESET_VBUS_OFF -> SRC_HARD_RESET_VBUS_ON @ 760 ms
[ 693.844575] VBUS off
[ 693.844580] state change SRC_HARD_RESET_VBUS_OFF -> SRC_HARD_RESET_VBUS_ON
[ 693.844617] vbus:=1 charge=0
[ 693.850688] pending state change SRC_HARD_RESET_VBUS_ON -> SRC_UNATTACHED @ 480 ms
[ 693.868706] VBUS on
[ 693.868713] state change SRC_HARD_RESET_VBUS_ON -> SRC_STARTUP
[ 693.868742] AMS POWER_NEGOTIATION start
[ 693.868749] cc:=4
[ 694.101422] state change SRC_STARTUP -> AMS_START in AMS POWER_NEGOTIATION
[ 694.101425] state change AMS_START -> SRC_SEND_CAPABILITIES in AMS POWER_NEGOTIATION
[ 694.101428] PD TX, header: 0x11a1
[ 694.205301] pending state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES @ 150 ms in AMS POWER_NEGOTIATION
[ 694.205317] CC1: 2 -> 2, CC2: 1 -> 1 [state SRC_SEND_CAPABILITIES, polarity 0, connected]
[ 694.325808] Received hard reset
[ 694.325816] state change SRC_SEND_CAPABILITIES -> HARD_RESET_START in AMS NONE_AMS
[ 694.329208] pending state change HARD_RESET_START -> SRC_HARD_RESET_VBUS_OFF @ 30 ms in AMS NONE_AMS
[ 694.359394] state change HARD_RESET_START -> SRC_HARD_RESET_VBUS_OFF [delayed 30 ms]
[ 694.359401] vconn:=1
[ 694.359408] vbus:=0 charge=0
[ 694.366321] Requesting mux state 1, usb-role 1, orientation 1
[ 694.367685] pending state change SRC_HARD_RESET_VBUS_OFF -> SRC_HARD_RESET_VBUS_ON @ 760 ms in AMS NONE_AMS
[ 694.367700] VBUS off
[ 694.367704] state change SRC_HARD_RESET_VBUS_OFF -> SRC_HARD_RESET_VBUS_ON in AMS NONE_AMS
[ 694.367721] vbus:=1 charge=0
[ 694.374175] pending state change SRC_HARD_RESET_VBUS_ON -> SRC_UNATTACHED @ 480 ms in AMS NONE_AMS
[ 694.374194] CC1: 2 -> 0, CC2: 1 -> 0 [state SRC_HARD_RESET_VBUS_ON, polarity 0, disconnected]
[ 694.374201] state change SRC_HARD_RESET_VBUS_ON -> SRC_UNATTACHED in AMS NONE_AMS
[ 694.631957] Start DRP toggling
thanks,
--
heikki
WARNING: multiple messages have this Message-ID (diff)
From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
To: Kyle Tso <kyletso@google.com>
Cc: linux@roeck-us.net, gregkh@linuxfoundation.org,
badhri@google.com, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [v2] usb: typec: tcpm: collision avoidance
Date: Thu, 4 Apr 2019 17:13:45 +0300 [thread overview]
Message-ID: <20190404141345.GF21319@kuha.fi.intel.com> (raw)
Hi,
On Fri, Mar 22, 2019 at 08:17:45PM +0800, Kyle Tso wrote:
> This patch provides the implementation of Collision Avoidance introduced
> in PD3.0. The start of each Atomic Message Sequence (AMS) initiated by
> the port will be denied if the current AMS is not interruptible. The
> Source port will set the CC to SinkTxNG if it is going to initiate an
> AMS, and SinkTxOk otherwise. Meanwhile, any AMS initiated by a Sink port
> will be denied in TCPM if the port partner (Source) sets SinkTxNG except
> for HARD_RESET and SOFT_RESET.
I tested this with my GDBWin which has fusb302. When I plug-in
DisplayPort adapter, the partner device never gets registered, and I
see steady flow of warnings from fusb302:
[ 693.391176] Vconn is on during toggle start
[ 693.391250] WARNING: CPU: 2 PID: 30 at drivers/usb/typec/tcpm/fusb302.c:562 fusb302_set_toggling+0x129/0x130 [fusb302]
[ 693.400293] Modules linked in: intel_xhci_usb_role_switch fusb302 tcpm roles pi3usb30532 i915 typec intel_gtt intel_cht_int33fe
[ 693.406309] CPU: 2 PID: 30 Comm: kworker/u8:1 Tainted: G W 5.1.0-rc3-heikki+ #17
[ 693.408434] cht_wcove_pwrsrc cht_wcove_pwrsrc: Could not detect charger type
[ 693.412278] Hardware name: Default string Default string/Default string, BIOS 5.11 05/25/2017
[ 693.412283] Workqueue: i2c-fusb302 tcpm_state_machine_work [tcpm]
[ 693.424256] RIP: 0010:fusb302_set_toggling+0x129/0x130 [fusb302]
[ 693.427234] Code: 89 df e8 da ef ff ff 85 c0 78 c6 c6 83 b0 01 00 00 00 eb b7 b9 02 00 00 00 e9 48 ff ff ff 48 c7 c7 20 e8 21 a0 e8 8e 0c e4 e0 <0f> 0b e9 58 ff ff ff 41 55 4c 8d 6f e8 41 54 41 89 f4 55 53 48 8d
[ 693.436204] RSP: 0000:ffffc9000076bd90 EFLAGS: 00010286
[ 693.439174] RAX: 0000000000000000 RBX: ffff888178080028 RCX: 0000000000000000
[ 693.442157] RDX: 000000000000001f RSI: ffffffff8259051f RDI: ffffffff8259091f
[ 693.445130] RBP: 0000000000000003 R08: ffffffff82590500 R09: 00000000000202c0
[ 693.448100] R10: 0000010cb24a3d18 R11: 000000000000001e R12: ffff8881780801b0
[ 693.451086] R13: ffffffffa021e4e5 R14: 0000000000000003 R15: ffff888178080040
[ 693.454060] FS: 0000000000000000(0000) GS:ffff88817bb00000(0000) knlGS:0000000000000000
[ 693.460009] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 693.462984] CR2: 00000000f7fb74a0 CR3: 000000000200d000 CR4: 00000000001006e0
[ 693.465969] Call Trace:
[ 693.468937] tcpm_set_cc+0xb9/0x170 [fusb302]
[ 693.471894] tcpm_ams_start+0x1b8/0x2a0 [tcpm]
[ 693.474855] ? _cond_resched+0x10/0x20
[ 693.477807] tcpm_state_machine_work+0x57e/0x28f6 [tcpm]
[ 693.480776] ? tcpm_pd_event_handler+0x111/0x320 [tcpm]
[ 693.483743] process_one_work+0x1da/0x410
[ 693.486703] worker_thread+0x28/0x3c0
[ 693.489651] ? process_one_work+0x410/0x410
[ 693.492603] kthread+0x10b/0x130
[ 693.495548] ? kthread_create_on_node+0x60/0x60
[ 693.498506] ret_from_fork+0x1f/0x30
Here's the tcpm debugfs log:
[ 692.553000] CC1: 0 -> 2, CC2: 0 -> 1 [state DRP_TOGGLING, polarity 0, connected]
[ 692.553016] state change DRP_TOGGLING -> SRC_ATTACH_WAIT
[ 692.553056] pending state change SRC_ATTACH_WAIT -> SNK_TRY @ 200 ms
[ 692.757402] state change SRC_ATTACH_WAIT -> SNK_TRY [delayed 200 ms]
[ 692.757410] cc:=2
[ 692.761946] pending state change SNK_TRY -> SNK_TRY_WAIT @ 100 ms
[ 692.869308] state change SNK_TRY -> SNK_TRY_WAIT [delayed 100 ms]
[ 692.869313] state change SNK_TRY_WAIT -> SRC_TRYWAIT
[ 692.869317] cc:=3
[ 692.873657] pending state change SRC_TRYWAIT -> SRC_TRYWAIT_UNATTACHED @ 100 ms
[ 692.882524] CC1: 2 -> 2, CC2: 1 -> 1 [state SRC_TRYWAIT, polarity 0, connected]
[ 692.882537] state change SRC_TRYWAIT -> SRC_TRYWAIT_DEBOUNCE
[ 692.882567] pending state change SRC_TRYWAIT_DEBOUNCE -> SRC_ATTACHED @ 200 ms
[ 693.085337] state change SRC_TRYWAIT_DEBOUNCE -> SRC_ATTACHED [delayed 200 ms]
[ 693.085347] polarity 0
[ 693.085352] Requesting mux state 1, usb-role 1, orientation 1
[ 693.346845] vconn:=1
[ 693.347174] vbus:=1 charge=0
[ 693.358340] pending state change SRC_ATTACHED -> SRC_UNATTACHED @ 480 ms
[ 693.378702] VBUS on
[ 693.378711] state change SRC_ATTACHED -> SRC_STARTUP
[ 693.378741] AMS POWER_NEGOTIATION start
[ 693.378745] cc:=4
[ 693.505321] state change SRC_STARTUP -> AMS_START in AMS POWER_NEGOTIATION
[ 693.505325] state change AMS_START -> SRC_SEND_CAPABILITIES in AMS POWER_NEGOTIATION
[ 693.505327] PD TX, header: 0x11a1
[ 693.613296] pending state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES @ 150 ms in AMS POWER_NEGOTIATION
[ 693.613309] CC1: 2 -> 2, CC2: 1 -> 1 [state SRC_SEND_CAPABILITIES, polarity 0, connected]
[ 693.765730] state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES [delayed 150 ms]
[ 693.765753] PD TX, header: 0x11a1
[ 693.770016] PD TX complete, status: 0
[ 693.770261] pending state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES_TIMEOUT @ 150 ms in AMS POWER_NEGOTIATION
[ 693.775178] PD RX, header: 0x1042 [1]
[ 693.775195] state change SRC_SEND_CAPABILITIES -> SRC_NEGOTIATE_CAPABILITIES
[ 693.775236] Requested 5000 mV, 400 mA for 400 / 900 mA
[ 693.775244] PD TX, header: 0x363
[ 693.778253] PD TX complete, status: 0
[ 693.778363] pending state change SRC_NEGOTIATE_CAPABILITIES -> SRC_TRANSITION_SUPPLY @ 35 ms
[ 693.803463] Received hard reset
[ 693.803473] state change SRC_NEGOTIATE_CAPABILITIES -> HARD_RESET_START
[ 693.806323] pending state change HARD_RESET_START -> SRC_HARD_RESET_VBUS_OFF @ 30 ms
[ 693.837400] state change HARD_RESET_START -> SRC_HARD_RESET_VBUS_OFF [delayed 30 ms]
[ 693.837414] vconn:=1
[ 693.837426] vbus:=0 charge=0
[ 693.843380] Requesting mux state 1, usb-role 1, orientation 1
[ 693.844554] pending state change SRC_HARD_RESET_VBUS_OFF -> SRC_HARD_RESET_VBUS_ON @ 760 ms
[ 693.844575] VBUS off
[ 693.844580] state change SRC_HARD_RESET_VBUS_OFF -> SRC_HARD_RESET_VBUS_ON
[ 693.844617] vbus:=1 charge=0
[ 693.850688] pending state change SRC_HARD_RESET_VBUS_ON -> SRC_UNATTACHED @ 480 ms
[ 693.868706] VBUS on
[ 693.868713] state change SRC_HARD_RESET_VBUS_ON -> SRC_STARTUP
[ 693.868742] AMS POWER_NEGOTIATION start
[ 693.868749] cc:=4
[ 694.101422] state change SRC_STARTUP -> AMS_START in AMS POWER_NEGOTIATION
[ 694.101425] state change AMS_START -> SRC_SEND_CAPABILITIES in AMS POWER_NEGOTIATION
[ 694.101428] PD TX, header: 0x11a1
[ 694.205301] pending state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES @ 150 ms in AMS POWER_NEGOTIATION
[ 694.205317] CC1: 2 -> 2, CC2: 1 -> 1 [state SRC_SEND_CAPABILITIES, polarity 0, connected]
[ 694.325808] Received hard reset
[ 694.325816] state change SRC_SEND_CAPABILITIES -> HARD_RESET_START in AMS NONE_AMS
[ 694.329208] pending state change HARD_RESET_START -> SRC_HARD_RESET_VBUS_OFF @ 30 ms in AMS NONE_AMS
[ 694.359394] state change HARD_RESET_START -> SRC_HARD_RESET_VBUS_OFF [delayed 30 ms]
[ 694.359401] vconn:=1
[ 694.359408] vbus:=0 charge=0
[ 694.366321] Requesting mux state 1, usb-role 1, orientation 1
[ 694.367685] pending state change SRC_HARD_RESET_VBUS_OFF -> SRC_HARD_RESET_VBUS_ON @ 760 ms in AMS NONE_AMS
[ 694.367700] VBUS off
[ 694.367704] state change SRC_HARD_RESET_VBUS_OFF -> SRC_HARD_RESET_VBUS_ON in AMS NONE_AMS
[ 694.367721] vbus:=1 charge=0
[ 694.374175] pending state change SRC_HARD_RESET_VBUS_ON -> SRC_UNATTACHED @ 480 ms in AMS NONE_AMS
[ 694.374194] CC1: 2 -> 0, CC2: 1 -> 0 [state SRC_HARD_RESET_VBUS_ON, polarity 0, disconnected]
[ 694.374201] state change SRC_HARD_RESET_VBUS_ON -> SRC_UNATTACHED in AMS NONE_AMS
[ 694.631957] Start DRP toggling
thanks,
next prev parent reply other threads:[~2019-04-04 14:13 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-22 12:17 [PATCH v2] usb: typec: tcpm: collision avoidance Kyle Tso
2019-03-22 12:17 ` [v2] " Kyle Tso
2019-04-04 14:13 ` Heikki Krogerus [this message]
2019-04-04 14:13 ` Heikki Krogerus
2019-04-05 13:42 ` [PATCH v2] " Guenter Roeck
2019-04-05 13:42 ` [v2] " Guenter Roeck
2019-04-08 14:17 ` [PATCH v2] " Kyle Tso
2019-04-08 14:17 ` [v2] " Kyle Tso
2019-04-09 13:02 ` [PATCH v2] " Heikki Krogerus
2019-04-09 13:02 ` [v2] " Heikki Krogerus
2019-04-09 13:06 ` [PATCH v2] " Heikki Krogerus
2019-04-09 13:06 ` [v2] " Heikki Krogerus
2019-04-09 14:41 ` [PATCH v2] " Hans de Goede
2019-04-09 14:41 ` [v2] " Hans de Goede
2019-04-10 10:32 ` [PATCH v2] " Adam Thomson
2019-04-10 10:32 ` [v2] " Opensource [Adam Thomson]
2019-04-10 12:49 ` [PATCH v2] " Kyle Tso
2019-04-10 12:49 ` [v2] " Kyle Tso
2019-04-10 15:45 ` [PATCH v2] " Hans de Goede
2019-04-10 15:45 ` [v2] " Hans de Goede
2019-04-10 16:14 ` [PATCH v2] " Adam Thomson
2019-04-10 16:14 ` [v2] " Opensource [Adam Thomson]
2019-04-10 16:38 ` [PATCH v2] " Hans de Goede
2019-04-10 16:38 ` [v2] " Hans de Goede
2019-04-10 16:49 ` [PATCH v2] " Hans de Goede
2019-04-10 16:49 ` [v2] " Hans de Goede
2019-04-11 9:06 ` [PATCH v2] " Adam Thomson
2019-04-11 9:06 ` [v2] " Opensource [Adam Thomson]
2019-04-13 20:38 ` [PATCH v2] " Hans de Goede
2019-04-13 20:38 ` [v2] " Hans de Goede
2019-04-15 10:03 ` [PATCH v2] " Adam Thomson
2019-04-15 10:03 ` [v2] " Opensource [Adam Thomson]
2019-09-19 10:48 ` [PATCH v2] " Kyle Tso
2019-09-19 11:00 ` Heikki Krogerus
2019-09-19 13:31 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190404141345.GF21319@kuha.fi.intel.com \
--to=heikki.krogerus@linux.intel.com \
--cc=badhri@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=kyletso@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@roeck-us.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.