* [PULL V2] First round of new device support, cleanups and fixes for IIO in the 5.2 cycle.
@ 2019-04-04 19:57 Jonathan Cameron
2019-04-04 20:33 ` Greg KH
0 siblings, 1 reply; 2+ messages in thread
From: Jonathan Cameron @ 2019-04-04 19:57 UTC (permalink / raw)
To: gregkh, linux-iio
The following changes since commit b397f82585c3101dcf92642dd359891e66d00c55:
Merge 5.1-rc3 into staging-next (2019-04-01 07:49:24 +0200)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.2a-2
for you to fetch changes up to df1d80aee963480c5c2938c64ec0ac3e4a0df2e0:
iio: ad_sigma_delta: Properly handle SPI bus locking vs CS assertion (2019-04-04 20:21:15 +0100)
----------------------------------------------------------------
First set of new device support, features and fixes for IIO in the 5.2 cycle
Staging graduations
* ad7780
- Move this ADC driver out of staging. Included adding some new features
along the way (see below). Also added DT bindings.
New device support
* adis16480
- Support the ADIS16495 and ADIS16497 IMU devices making
heavy use of refactoring of various aspects of the driver in precursor
patches.
* lsm6dsx
- Support for the ASM330LHH 6-axis (accelerometer + gyro) sensor.
- Support for the LSM6DS0X
* matbotix mb1232
- New driver for this ultrasound ranging device family. Including bindings.
- Supports mb1202, mb1212, mb1222, mb1232, mb1242, mb7040 and mb7137.
* max31856
- New driver for this thermocouple temperature sensor.
* meson saradc
- Support the Meson-G12A (ID addition only).
* stmpe-adc
- New driver supporting generic ADC alongside touchscreen support which
previously existed. Includes DT bindings.
* vcnl4000
- Support for the vcln4040 proximity and light sensor, including adding
DT bindings for this and parts previously supported.
Features
* core
- Allow reading of mount matrices from ACPI in addition to DT.
- Common binding for theromcouple types.
* ad5933
- Add ABI docs as there are a few 'unsual' elements about this
device - perhaps because it's our only impedance analyser.
* ad7780
- Add gain and filter gpio support + readback of current gain and filter.
* adis16480
- Allow selection fo the dataready pin to be used.
- Device tree ID table and binding documentation.
- Support external clock modes, including new bindings.
* bma180
- Mount matrix support.
* bmc150
- Mount matrix support.
* bmg160
- Mount matrix support.
- DT id table and bindings doc.
* bmp280
- Put calibration data into the entropy pool.
* hmc5843
- Mount matrix support.
* itg3200
- Mount matrix support.
* kxcjk1013
- Device tree id table, and binding docs.
* lpc32xx
- Add scale when regulator specified including DT docs for regulator.
* pms7003
- Add device IDs for all supported parts to driver and binding.
* stm32-dfsdm
- Enable hw consumer support, scan mode control and a complex set of
triggered buffer modes.
- Power management.
* stm32-lptimer-counter
- power management.
- Document the pinctrl sleep state binding.
* ti-ads7950
- GPIO pin support.
Cleanups, minor fixes
* core
- Use bitmap_zalloc to make it explicit that is what we are doing.
- Tidy up all the Kconfig files (which had slowly gotten messy)
- Fix a forwards definition missing issue in iio/driver.h
* ad sigma delta core
- Improve handling of SPI bus locking vs CS assertion. This has been
wrong a long time so not rushing this in.
* ad5064
- Mlock to local lock.
* ad5933 (staging cleanup)
- Multiline comment fixes.
- Include ordering.
- SPDX.
- Tidy up Kconfig help which was a bit missleading.
- Change some non standard attributes to ABI defined ones.
* ad7124
- White space fix.
* ad7192
- White space.
- Use DT clock binding.
- Improve error reporting.
- Platform data to DT conversion.
- Use read_avail callback, mostly to avoid the endless series of
patches from new contributors trying to falsely put spaces around
the negative sign.
* ad7280a
- Add brackets to macros to avoid potential precedence isseus.
- Add temp vars for event codes to reduce indent and improved readability.
- Clean out som CamelCase notation.
- White space.
* ad7606
- Fix broken file naming in MAINTAINERS.
* ad7780
- Missing switch defaults to supress warnings and harden the code slightly.
- Set pattern masks more directly.
- Add ID values and masks for all supported chips.
- SPDX + add Renato as a copyright holder as he has done a lot of work on
this driver.
- Add brackets to macros to avoid potential precedence issues.
* ad7923
- White space fixes.
- Use BIT macro to improve readability.
- Add brackets to macros to avoid potential precedence issues.
- Tidy up a null comparisom.
* ad9523
- Fix a typo in naming of variables.
* adis16400
- Combine trigger file into main code as no advantage in separate files.
Rename core file to just adis16400.
- Squash the header into the c file now there is only one file.
- Generalize burst mode to support new variants.
* ak8975
- Local variable to improve readability around mount matrix support.
* as3935
- Avoid potential race by ensuring remove does exact opposite of
probe rather than a slightly different order.
* cross_ec
- Drop some unnecessary includes.
- Fix some warning and the slightly 'unusual' code.
- Add some docs for non obvious function.
- SPDX
* hmc5843
- Potential unhandled error case.
* iio trigger core
- Print an error if there is no available irq due to max consumers per
trigger being set to low.
* iio loop trigger
- Drop an unlikely on IS_ERR as IS_ERR already has the annotation.
* ingenic-adc
- Drop a redundant dev_err call as devm_ioremap_resource reports the same
internally.
* lmp91000
- Drop some unncessary parentheses and white space tidy up.
- Invert and if statement to improve readability.
- Fix a wrong error message.
* lpc32xx
- Header sorting + drop some unused ones.
* mma8542
- Mark a switch fallthrough.
* mpu6050
- Add a local variable to improve code readability around mount matrix
support.
* mxs-lradc-adc
- Handle devm_iio_trigger_alloc failure.
* sps30
- Fix up a kernel version in the ABI docs.
* srf04
- DT binding doc converted to yaml.
* ssp_sensors
- Supress a clang build warning due to lack of visibility of conditional
within a iio_push_to_buffers_with_timestamp. (reasonable false warning!)
* st_accel
- Drop pointless less than 0 comparisom of unsigned int.
* stm32-dfsdm
- Improve accuracy of spi_master_frequency calculation.
- Improve calculation fo sampling frequency.
- Rework various internals to simplify adding triggered buffer support.
- Claim direct mode to avoid racing around read_raw and being in buffered
mode.
* stmpe
- Fix a clang false positive warning.
* ti-ads7950
- Use local lock rather than using the core mlock when not locking around
the device mode.
* vcnl4000
- Use word writes instead of byte writes. It seems byte writes are fine
for some parts (undocument) but not others that the driver will shortly
support.
Other
* mailmap
- Add email address change for Sean Nyekjaer. Update in relevant drivers
----------------------------------------------------------------
Alexandru Ardelean (5):
iio: imu: adis16400: move trigger handler into adis16400_core
iio: imu: adis: generalize burst mode support
iio: imu: adis16400: move burst logic to ADIS lib
iio: imu: adis16400: rename adis16400_core.c -> adi16400.c
iio: imu: adis16400: move adis16400.h into adis16400.c
Anderson Reis (3):
iio:potentiostat:lmp91000: reduce line width and remove blank line
iio:potentiostat:lmp91000: invert if statement
iio:potentiostat:lmp91000: change dev_err message
Andreas Klinger (5):
dt-bindings: Add vendor prefix for MaxBotix
dt-bindings: maxbotix,mb1232: Add MaxBotix i2c ultrasonic rangers
mb1232.c: add distance iio sensor with i2c
MAINTAINERS: add maintainer for maxbotix ultrasonic driver
devantech-srf04.yaml: transform DT binding to YAML
Andy Shevchenko (3):
iio: Allow to read mount matrix from ACPI
iio: buffer: Switch to bitmap_zalloc()
iio: Make possible to include driver.h first
Angus Ainslie (Purism) (5):
iio: light: vcnl4000 use word writes instead of byte writes
iio: light: vcnl4000 add devicetree hooks
dt-bindings: iio: light: add vcnl4000 devicetree bindings
iio: light: vcnl4000 add support for the VCNL4040 proximity and light sensor
dt-bindings: iio: light: add vcnl4040 devicetree bindings
Bárbara Fernandes (4):
iio:adc:ad7923: Align broken line to parenthesis
iio:adc:ad7923: Use BIT macro instead of bitshift
iio:adc:ad7923: Put macro argument between ()'s
iio:adc:ad7923: Rewrite comparison to NULL
Chengguang Xu (1):
iio: remove redundant unlikely annotation
Colin Ian King (2):
iio: st_accel: remove redundant unsigned less than zero check
iio: adc: ad7124 fix indentation issue, remove extra tab
Cristian Sicilia (4):
staging: iio: adc: ad7280a: Avoid precedence issues in macro
staging: iio: adc: ad7280a: Adding temp var to improve readability
staging: iio: adc: ad7280a: Remove CamelCase notation
staging: iio: adc: ad7280a: Tab alignment
Enric Balletbo i Serra (1):
iio: cros_ec: Switch to SPDX identifier.
Enrico Weigelt, metux IT consult (1):
drivers: iio: Kconfig: pedantic cleanup
Fabrice Gasnier (12):
dt-bindings: iio: stm32-lptimer-counter: document pinctrl sleep state
iio: counter: stm32-lptimer: Add power management support
iio: adc: stm32-dfsdm: make spi_master_freq more accurate
iio: adc: stm32-dfsdm: continuous mode depends on current mode
iio: adc: stm32-dfsdm: move dma enable from start_conv() to start_dma()
iio: adc: stm32-dfsdm: move dma slave config to start routine
iio: adc: stm32-dfsdm: enable hw consumer
iio: adc: stm32-dfsdm: add support for scan mode
iio: adc: stm32-dfsdm: add support for buffer modes
iio: adc: stm32-dfsdm: claim direct mode for raw read and settings
iio: adc: stm32-dfsdm: improve sampling frequency accuracy
iio: adc: stm32-dfsdm: add PM support
Gregory CLEMENT (4):
iio: adc: lpc32xx: Sort headers
iio: adc: lpc32xx: Cleanup headers
iio: adc: lpc32xx: Add scale feature
dt-bindings: iio: adc: lpc32xx-adc: Document vref-supply
Guenter Roeck (1):
iio: cros_ec: Drop unnecessary include files
Gustavo A. R. Silva (2):
iio: mma8452: mark expected switch fall-through
iio: cros_ec_accel_legacy: Refactor code in cros_ec_accel_legacy_probe
Gwendal Grignou (1):
iio: cros_ec: Add kernel-doc for cros_ec_sensors_read_lpc
H. Nikolaus Schaller (10):
iio: accel: bmc150: add mount matrix support
iio: accel: bma180: add mount matrix support
iio: gyro: bmg160: add mount matrix support
iio: gyro: itg3200: add mount matrix support
iio: magnetometer: bmc150: add mount matrix support
iio: magnetometer: hmc5843: add mount matrix support
iio: mpu6050: improve code readability
iio: ak8975: improve code readability
iio: gyro: bmg160: add device tree compatibility table
dt-bindings: iio: add Bosch BMG160 gyroscope sensor
Jonathan Cameron (1):
iio:dac:ad5064 mlock cleanup - move to a local lock.
Justin Chen (2):
iio: adc: ti-ads7950: Fix improper use of mlock
iio: adc: ti-ads7950: add GPIO support
Kangjie Lu (2):
iio: adc: fix a potential NULL pointer dereference
iio: hmc5843: fix potential NULL pointer dereferences
Lars-Peter Clausen (2):
iio: frequency: ad9523: Fix typo in ad9523_platform_data
iio: ad_sigma_delta: Properly handle SPI bus locking vs CS assertion
Linus Walleij (1):
iio: pressure: bmp280: BMP280 calibration to entropy
Lorenzo Bianconi (4):
iio: imu: st_lsm6dsx: add support to ASM330LHH
dt-bindings: iio: imu: st_lsm6dsx: add asm330lhh device bindings
iio: imu: st_lsm6dsx: add support to LSM6DSOX
dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsox device bindings
Lucas Oshiro (1):
iio:potentiostat:lmp91000: remove unnecessary parentheses
Marcelo Schmitt (6):
staging: iio: ad5933: change multi-line comment style
staging: iio: ad5933: organize includes
staging: iio: ad5933: add SPDX identifier
staging: iio: ad5933: change help rule message
staging: iio: ad5933: add ABI documentation
staging: iio: ad5933: change attributes to match ABI
Mathieu Othacehe (1):
iio: trigger: Print an error if there is no available irq
Mircea Caprioru (5):
staging: iio: adc: ad7192: Fix identation
staging: iio: adc: ad7192: Use DT clock binding
staging: iio: adc: ad7192: Report error directly in ad7192_setup
staging: iio: adc: ad7192: Convert platform data to DT properties
staging: iio: adc: ad7192: Use read_avail for available attributes
Nathan Chancellor (2):
iio: common: ssp_sensors: Initialize calculated_time in ssp_common_process_data
iio: adc: stmpe-adc: Shuffle an if statement around in stmpe_adc_isr
Neil Armstrong (2):
dt-bindings: iio: adc: document the Meson G12A support
iio: adc: meson-saradc: add support for Meson G12A
Paresh Chaudhary (2):
iio:temperature:max31856:Add device tree bind info
iio:temperature: Add MAX31856 thermocouple support
Patrick Havelange (1):
dt-bindings: iio/temperature: Add thermocouple types (and doc)
Renato Lui Geh (11):
staging: iio: ad7780: add gain & filter gpio support
staging: iio: ad7780: add missing switch default case
staging: iio: ad7780: add gain reading to ad778x
staging: iio: ad7780: add filter reading to ad778x
staging: iio: ad7780: set pattern values and masks directly
staging:iio:ad7780: add chip ID values and mask
staging: iio: ad7780: move regulator to after GPIO init
staging: iio: ad7780: add SPDX identifier
staging: iio: ad7780: add new copyright holder
staging: iio: ad7780: moving ad7780 out of staging
staging: iio: ad7780: add device tree binding
Robert Yang (3):
dt-bindings: Add vendor prefix for Kionix, Inc.
dt-bindings: iio: accel: kxcjk1013: Add device tree binding documentation
iio: accel: kxcjk1013: Add device tree support
Sean Nyekjaer (3):
mailmap: Update email for Sean Nyekjaer
iio: adc: ti-ads8688: Update the module author email address
iio: dac: ti-dac5571: Update the module author email address
Stefan Popa (10):
iio: imu: adis16480: Add support for configurable drdy indicator
iio: imu: adis16480: Add OF device ID table
iio: imu: adis16480: Treat temperature scale in a generic way
iio: imu: adis16480: Calculate the sampling frequency in a generic way
iio: imu: adis16480: Deal with filter freq in a generic way
iio: imu: adis16480: Add support for ADIS1649x family of devices
iio: imu: adis16480: Add docs for ADIS16480 IMU
iio: imu: adis16480: Add support for external clock
dt-bindings: iio: imu: adis16480: Document external clock
MAINTAINERS: Fix the link to ad7606 dt-bindings
Sven Van Asbroeck (1):
iio: proximity: as3935: fix use-after-free on device remove
Tomasz Duszynski (3):
iio: chemical: pms7003: extend supported sensors list
dt-bindings: iio: chemical: pms7003: extend supported sensors list
iio: chemical: sps30: fix attribute kernel version
Vladimir Petrigo (1):
iio: adc: ad7780: Add parentheses to macros
Wei Yongjun (1):
iio: adc: ingenic: remove redundant dev_err call in ingenic_adc_probe()
.mailmap | 1 +
.../sysfs-bus-iio-impedance-analyzer-ad5933 | 19 +-
Documentation/ABI/testing/sysfs-bus-iio-sps30 | 2 +-
.../ABI/testing/sysfs-bus-iio-temperature-max31856 | 24 +
.../bindings/iio/accel/kionix,kxcjk1013.txt | 17 +
.../devicetree/bindings/iio/adc/adi,ad7780.txt | 48 ++
.../bindings/iio/adc/amlogic,meson-saradc.txt | 1 +
.../devicetree/bindings/iio/adc/lpc32xx-adc.txt | 5 +
.../bindings/iio/chemical/plantower,pms7003.txt | 8 +-
.../bindings/iio/counter/stm32-lptimer-cnt.txt | 8 +-
.../devicetree/bindings/iio/gyroscope/bmg160.txt | 20 +
.../devicetree/bindings/iio/imu/adi,adis16480.txt | 85 +++
.../devicetree/bindings/iio/imu/st_lsm6dsx.txt | 2 +
.../devicetree/bindings/iio/light/vcnl4000.txt | 24 +
.../bindings/iio/proximity/devantech-srf04.txt | 28 -
.../bindings/iio/proximity/devantech-srf04.yaml | 59 ++
.../bindings/iio/proximity/maxbotix,mb1232.txt | 29 +
.../bindings/iio/temperature/max31856.txt | 24 +
.../iio/temperature/temperature-bindings.txt | 7 +
.../devicetree/bindings/vendor-prefixes.txt | 2 +
MAINTAINERS | 10 +-
drivers/iio/Kconfig | 24 +-
drivers/iio/accel/Kconfig | 48 +-
drivers/iio/accel/bma180.c | 18 +-
drivers/iio/accel/bmc150-accel-core.c | 21 +
drivers/iio/accel/cros_ec_accel_legacy.c | 40 +-
drivers/iio/accel/kxcjk-1013.c | 10 +
drivers/iio/accel/kxsd9.c | 4 +-
drivers/iio/accel/mma8452.c | 2 +-
drivers/iio/accel/st_accel_core.c | 2 +-
drivers/iio/adc/Kconfig | 32 +-
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/ad7124.c | 2 +-
drivers/{staging => }/iio/adc/ad7780.c | 179 ++++--
drivers/iio/adc/ad7923.c | 24 +-
drivers/iio/adc/ad_sigma_delta.c | 16 +-
drivers/iio/adc/ingenic-adc.c | 4 +-
drivers/iio/adc/lpc32xx_adc.c | 60 +-
drivers/iio/adc/meson_saradc.c | 8 +
drivers/iio/adc/mxs-lradc-adc.c | 2 +
drivers/iio/adc/stm32-dfsdm-adc.c | 628 ++++++++++++++++-----
drivers/iio/adc/stm32-dfsdm-core.c | 180 +++++-
drivers/iio/adc/stmpe-adc.c | 5 +-
drivers/iio/adc/ti-ads7950.c | 219 ++++++-
drivers/iio/adc/ti-ads8688.c | 2 +-
drivers/iio/buffer/industrialio-buffer-cb.c | 10 +-
drivers/iio/chemical/Kconfig | 12 +-
drivers/iio/chemical/pms7003.c | 5 +
.../iio/common/cros_ec_sensors/cros_ec_sensors.c | 12 +-
.../common/cros_ec_sensors/cros_ec_sensors_core.c | 22 +-
drivers/iio/common/ms_sensors/Kconfig | 2 +-
drivers/iio/common/ssp_sensors/ssp_iio.c | 2 +-
drivers/iio/counter/stm32-lptimer-cnt.c | 55 ++
drivers/iio/dac/ad5064.c | 15 +-
drivers/iio/dac/ti-dac5571.c | 2 +-
drivers/iio/frequency/ad9523.c | 16 +-
drivers/iio/gyro/bmg160_core.c | 21 +
drivers/iio/gyro/bmg160_i2c.c | 9 +
drivers/iio/gyro/itg3200_core.c | 20 +
drivers/iio/gyro/mpu3050-core.c | 3 +-
drivers/iio/humidity/Kconfig | 20 +-
drivers/iio/imu/Makefile | 2 -
drivers/iio/imu/{adis16400_core.c => adis16400.c} | 232 +++++++-
drivers/iio/imu/adis16400.h | 215 -------
drivers/iio/imu/adis16400_buffer.c | 101 ----
drivers/iio/imu/adis16480.c | 435 +++++++++++++-
drivers/iio/imu/adis_buffer.c | 40 ++
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 10 +-
drivers/iio/imu/st_lsm6dsx/Kconfig | 2 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 4 +
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 8 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 42 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 10 +
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 10 +
drivers/iio/industrialio-buffer.c | 24 +-
drivers/iio/industrialio-core.c | 46 +-
drivers/iio/industrialio-trigger.c | 5 +-
drivers/iio/light/Kconfig | 274 ++++-----
drivers/iio/light/cros_ec_light_prox.c | 12 +-
drivers/iio/light/vcnl4000.c | 77 ++-
drivers/iio/magnetometer/ak8974.c | 5 +-
drivers/iio/magnetometer/ak8975.c | 13 +-
drivers/iio/magnetometer/bmc150_magn.c | 21 +
drivers/iio/magnetometer/hmc5843.h | 1 +
drivers/iio/magnetometer/hmc5843_core.c | 20 +-
drivers/iio/magnetometer/hmc5843_i2c.c | 7 +-
drivers/iio/magnetometer/hmc5843_spi.c | 7 +-
drivers/iio/potentiometer/Kconfig | 34 +-
drivers/iio/potentiostat/lmp91000.c | 14 +-
drivers/iio/pressure/bmp280-core.c | 6 +
drivers/iio/pressure/cros_ec_baro.c | 11 +-
drivers/iio/proximity/Kconfig | 12 +
drivers/iio/proximity/Makefile | 1 +
drivers/iio/proximity/as3935.c | 50 +-
drivers/iio/proximity/mb1232.c | 272 +++++++++
drivers/iio/temperature/Kconfig | 24 +-
drivers/iio/temperature/Makefile | 1 +
drivers/iio/temperature/max31856.c | 353 ++++++++++++
drivers/iio/trigger/iio-trig-loop.c | 2 +-
drivers/staging/iio/adc/Kconfig | 13 -
drivers/staging/iio/adc/Makefile | 1 -
drivers/staging/iio/adc/ad7192.c | 233 +++++---
drivers/staging/iio/adc/ad7192.h | 9 -
drivers/staging/iio/adc/ad7280a.c | 109 ++--
drivers/staging/iio/impedance-analyzer/Kconfig | 2 +-
drivers/staging/iio/impedance-analyzer/ad5933.c | 54 +-
include/dt-bindings/iio/temperature/thermocouple.h | 16 +
include/linux/iio/adc/ad_sigma_delta.h | 1 +
include/linux/iio/driver.h | 1 +
include/linux/iio/frequency/ad9523.h | 8 +-
include/linux/iio/gyro/itg3200.h | 1 +
include/linux/iio/iio.h | 4 +-
include/linux/iio/imu/adis.h | 14 +
113 files changed, 3777 insertions(+), 1272 deletions(-)
rename {drivers/staging/iio/Documentation => Documentation/ABI/testing}/sysfs-bus-iio-impedance-analyzer-ad5933 (56%)
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-temperature-max31856
create mode 100644 Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.txt
create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt
create mode 100644 Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt
create mode 100644 Documentation/devicetree/bindings/iio/imu/adi,adis16480.txt
create mode 100644 Documentation/devicetree/bindings/iio/light/vcnl4000.txt
delete mode 100644 Documentation/devicetree/bindings/iio/proximity/devantech-srf04.txt
create mode 100644 Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
create mode 100644 Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.txt
create mode 100644 Documentation/devicetree/bindings/iio/temperature/max31856.txt
create mode 100644 Documentation/devicetree/bindings/iio/temperature/temperature-bindings.txt
rename drivers/{staging => }/iio/adc/ad7780.c (63%)
rename drivers/iio/imu/{adis16400_core.c => adis16400.c} (77%)
delete mode 100644 drivers/iio/imu/adis16400.h
delete mode 100644 drivers/iio/imu/adis16400_buffer.c
create mode 100644 drivers/iio/proximity/mb1232.c
create mode 100644 drivers/iio/temperature/max31856.c
create mode 100644 include/dt-bindings/iio/temperature/thermocouple.h
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PULL V2] First round of new device support, cleanups and fixes for IIO in the 5.2 cycle.
2019-04-04 19:57 [PULL V2] First round of new device support, cleanups and fixes for IIO in the 5.2 cycle Jonathan Cameron
@ 2019-04-04 20:33 ` Greg KH
0 siblings, 0 replies; 2+ messages in thread
From: Greg KH @ 2019-04-04 20:33 UTC (permalink / raw)
To: Jonathan Cameron; +Cc: linux-iio
On Thu, Apr 04, 2019 at 08:57:20PM +0100, Jonathan Cameron wrote:
> The following changes since commit b397f82585c3101dcf92642dd359891e66d00c55:
>
> Merge 5.1-rc3 into staging-next (2019-04-01 07:49:24 +0200)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.2a-2
Looks good, now pulled and pushed out.
greg k-h
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-04-04 20:35 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-04 19:57 [PULL V2] First round of new device support, cleanups and fixes for IIO in the 5.2 cycle Jonathan Cameron
2019-04-04 20:33 ` Greg KH
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.