From: Dan Murphy <dmurphy@ti.com> To: robh+dt@kernel.org, jacek.anaszewski@gmail.com, pavel@ucw.cz, lee.jones@linaro.org Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-leds@vger.kernel.org, Dan Murphy <dmurphy@ti.com> Subject: [PATCH v2 5/6] mfd: ti-lmu: Remove support for LM3697 Date: Fri, 5 Apr 2019 09:28:54 -0500 [thread overview] Message-ID: <20190405142855.3969-5-dmurphy@ti.com> (raw) In-Reply-To: <20190405142855.3969-1-dmurphy@ti.com> Remove support for the LM3697 from the ti-lmu driver in favor of a dedicated LED driver. Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Dan Murphy <dmurphy@ti.com> --- v2 - Fixed commit message LF, removed leds/Kconfig from patch. - https://lore.kernel.org/patchwork/patch/1054502/ drivers/mfd/Kconfig | 2 +- drivers/mfd/ti-lmu.c | 17 ----------- include/linux/mfd/ti-lmu-register.h | 44 ----------------------------- include/linux/mfd/ti-lmu.h | 1 - 4 files changed, 1 insertion(+), 63 deletions(-) diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 26ad6468d13a..fcae244229b3 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1312,7 +1312,7 @@ config MFD_TI_LMU help Say yes here to enable support for TI LMU chips. - TI LMU MFD supports LM3532, LM3631, LM3632, LM3633, LM3695 and LM3697. + TI LMU MFD supports LM3532, LM3631, LM3632, LM3633, and LM3695. It consists of backlight, LED and regulator driver. It provides consistent device controls for lighting functions. diff --git a/drivers/mfd/ti-lmu.c b/drivers/mfd/ti-lmu.c index b06cb908d1aa..89b1c5b584af 100644 --- a/drivers/mfd/ti-lmu.c +++ b/drivers/mfd/ti-lmu.c @@ -111,20 +111,6 @@ static const struct mfd_cell lm3695_devices[] = { }, }; -static const struct mfd_cell lm3697_devices[] = { - { - .name = "ti-lmu-backlight", - .id = LM3697, - .of_compatible = "ti,lm3697-backlight", - }, - /* Monitoring driver for open/short circuit detection */ - { - .name = "ti-lmu-fault-monitor", - .id = LM3697, - .of_compatible = "ti,lm3697-fault-monitor", - }, -}; - #define TI_LMU_DATA(chip, max_reg) \ static const struct ti_lmu_data chip##_data = \ { \ @@ -137,7 +123,6 @@ TI_LMU_DATA(lm3631, LM3631_MAX_REG); TI_LMU_DATA(lm3632, LM3632_MAX_REG); TI_LMU_DATA(lm3633, LM3633_MAX_REG); TI_LMU_DATA(lm3695, LM3695_MAX_REG); -TI_LMU_DATA(lm3697, LM3697_MAX_REG); static int ti_lmu_probe(struct i2c_client *cl, const struct i2c_device_id *id) { @@ -206,7 +191,6 @@ static const struct of_device_id ti_lmu_of_match[] = { { .compatible = "ti,lm3632", .data = &lm3632_data }, { .compatible = "ti,lm3633", .data = &lm3633_data }, { .compatible = "ti,lm3695", .data = &lm3695_data }, - { .compatible = "ti,lm3697", .data = &lm3697_data }, { } }; MODULE_DEVICE_TABLE(of, ti_lmu_of_match); @@ -216,7 +200,6 @@ static const struct i2c_device_id ti_lmu_ids[] = { { "lm3632", LM3632 }, { "lm3633", LM3633 }, { "lm3695", LM3695 }, - { "lm3697", LM3697 }, { } }; MODULE_DEVICE_TABLE(i2c, ti_lmu_ids); diff --git a/include/linux/mfd/ti-lmu-register.h b/include/linux/mfd/ti-lmu-register.h index f09510561a55..76998b01764b 100644 --- a/include/linux/mfd/ti-lmu-register.h +++ b/include/linux/mfd/ti-lmu-register.h @@ -189,48 +189,4 @@ #define LM3695_REG_BRT_MSB 0x14 #define LM3695_MAX_REG 0x14 - -/* LM3697 */ -#define LM3697_REG_HVLED_OUTPUT_CFG 0x10 -#define LM3697_HVLED1_CFG_MASK BIT(0) -#define LM3697_HVLED2_CFG_MASK BIT(1) -#define LM3697_HVLED3_CFG_MASK BIT(2) -#define LM3697_HVLED1_CFG_SHIFT 0 -#define LM3697_HVLED2_CFG_SHIFT 1 -#define LM3697_HVLED3_CFG_SHIFT 2 - -#define LM3697_REG_BL0_RAMP 0x11 -#define LM3697_REG_BL1_RAMP 0x12 -#define LM3697_RAMPUP_MASK 0xF0 -#define LM3697_RAMPUP_SHIFT 4 -#define LM3697_RAMPDN_MASK 0x0F -#define LM3697_RAMPDN_SHIFT 0 - -#define LM3697_REG_RAMP_CONF 0x14 -#define LM3697_RAMP_MASK 0x0F -#define LM3697_RAMP_EACH 0x05 - -#define LM3697_REG_PWM_CFG 0x1C -#define LM3697_PWM_A_MASK BIT(0) -#define LM3697_PWM_B_MASK BIT(1) - -#define LM3697_REG_IMAX_A 0x17 -#define LM3697_REG_IMAX_B 0x18 - -#define LM3697_REG_FEEDBACK_ENABLE 0x19 - -#define LM3697_REG_BRT_A_LSB 0x20 -#define LM3697_REG_BRT_A_MSB 0x21 -#define LM3697_REG_BRT_B_LSB 0x22 -#define LM3697_REG_BRT_B_MSB 0x23 - -#define LM3697_REG_ENABLE 0x24 - -#define LM3697_REG_OPEN_FAULT_STATUS 0xB0 - -#define LM3697_REG_SHORT_FAULT_STATUS 0xB2 - -#define LM3697_REG_MONITOR_ENABLE 0xB4 - -#define LM3697_MAX_REG 0xB4 #endif diff --git a/include/linux/mfd/ti-lmu.h b/include/linux/mfd/ti-lmu.h index 7762c1bce55d..54e9d272e81c 100644 --- a/include/linux/mfd/ti-lmu.h +++ b/include/linux/mfd/ti-lmu.h @@ -26,7 +26,6 @@ enum ti_lmu_id { LM3632, LM3633, LM3695, - LM3697, LMU_MAX_ID, }; -- 2.19.0
WARNING: multiple messages have this Message-ID (diff)
From: Dan Murphy <dmurphy@ti.com> To: <robh+dt@kernel.org>, <jacek.anaszewski@gmail.com>, <pavel@ucw.cz>, <lee.jones@linaro.org> Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-leds@vger.kernel.org>, Dan Murphy <dmurphy@ti.com> Subject: [PATCH v2 5/6] mfd: ti-lmu: Remove support for LM3697 Date: Fri, 5 Apr 2019 09:28:54 -0500 [thread overview] Message-ID: <20190405142855.3969-5-dmurphy@ti.com> (raw) In-Reply-To: <20190405142855.3969-1-dmurphy@ti.com> Remove support for the LM3697 from the ti-lmu driver in favor of a dedicated LED driver. Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Dan Murphy <dmurphy@ti.com> --- v2 - Fixed commit message LF, removed leds/Kconfig from patch. - https://lore.kernel.org/patchwork/patch/1054502/ drivers/mfd/Kconfig | 2 +- drivers/mfd/ti-lmu.c | 17 ----------- include/linux/mfd/ti-lmu-register.h | 44 ----------------------------- include/linux/mfd/ti-lmu.h | 1 - 4 files changed, 1 insertion(+), 63 deletions(-) diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 26ad6468d13a..fcae244229b3 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1312,7 +1312,7 @@ config MFD_TI_LMU help Say yes here to enable support for TI LMU chips. - TI LMU MFD supports LM3532, LM3631, LM3632, LM3633, LM3695 and LM3697. + TI LMU MFD supports LM3532, LM3631, LM3632, LM3633, and LM3695. It consists of backlight, LED and regulator driver. It provides consistent device controls for lighting functions. diff --git a/drivers/mfd/ti-lmu.c b/drivers/mfd/ti-lmu.c index b06cb908d1aa..89b1c5b584af 100644 --- a/drivers/mfd/ti-lmu.c +++ b/drivers/mfd/ti-lmu.c @@ -111,20 +111,6 @@ static const struct mfd_cell lm3695_devices[] = { }, }; -static const struct mfd_cell lm3697_devices[] = { - { - .name = "ti-lmu-backlight", - .id = LM3697, - .of_compatible = "ti,lm3697-backlight", - }, - /* Monitoring driver for open/short circuit detection */ - { - .name = "ti-lmu-fault-monitor", - .id = LM3697, - .of_compatible = "ti,lm3697-fault-monitor", - }, -}; - #define TI_LMU_DATA(chip, max_reg) \ static const struct ti_lmu_data chip##_data = \ { \ @@ -137,7 +123,6 @@ TI_LMU_DATA(lm3631, LM3631_MAX_REG); TI_LMU_DATA(lm3632, LM3632_MAX_REG); TI_LMU_DATA(lm3633, LM3633_MAX_REG); TI_LMU_DATA(lm3695, LM3695_MAX_REG); -TI_LMU_DATA(lm3697, LM3697_MAX_REG); static int ti_lmu_probe(struct i2c_client *cl, const struct i2c_device_id *id) { @@ -206,7 +191,6 @@ static const struct of_device_id ti_lmu_of_match[] = { { .compatible = "ti,lm3632", .data = &lm3632_data }, { .compatible = "ti,lm3633", .data = &lm3633_data }, { .compatible = "ti,lm3695", .data = &lm3695_data }, - { .compatible = "ti,lm3697", .data = &lm3697_data }, { } }; MODULE_DEVICE_TABLE(of, ti_lmu_of_match); @@ -216,7 +200,6 @@ static const struct i2c_device_id ti_lmu_ids[] = { { "lm3632", LM3632 }, { "lm3633", LM3633 }, { "lm3695", LM3695 }, - { "lm3697", LM3697 }, { } }; MODULE_DEVICE_TABLE(i2c, ti_lmu_ids); diff --git a/include/linux/mfd/ti-lmu-register.h b/include/linux/mfd/ti-lmu-register.h index f09510561a55..76998b01764b 100644 --- a/include/linux/mfd/ti-lmu-register.h +++ b/include/linux/mfd/ti-lmu-register.h @@ -189,48 +189,4 @@ #define LM3695_REG_BRT_MSB 0x14 #define LM3695_MAX_REG 0x14 - -/* LM3697 */ -#define LM3697_REG_HVLED_OUTPUT_CFG 0x10 -#define LM3697_HVLED1_CFG_MASK BIT(0) -#define LM3697_HVLED2_CFG_MASK BIT(1) -#define LM3697_HVLED3_CFG_MASK BIT(2) -#define LM3697_HVLED1_CFG_SHIFT 0 -#define LM3697_HVLED2_CFG_SHIFT 1 -#define LM3697_HVLED3_CFG_SHIFT 2 - -#define LM3697_REG_BL0_RAMP 0x11 -#define LM3697_REG_BL1_RAMP 0x12 -#define LM3697_RAMPUP_MASK 0xF0 -#define LM3697_RAMPUP_SHIFT 4 -#define LM3697_RAMPDN_MASK 0x0F -#define LM3697_RAMPDN_SHIFT 0 - -#define LM3697_REG_RAMP_CONF 0x14 -#define LM3697_RAMP_MASK 0x0F -#define LM3697_RAMP_EACH 0x05 - -#define LM3697_REG_PWM_CFG 0x1C -#define LM3697_PWM_A_MASK BIT(0) -#define LM3697_PWM_B_MASK BIT(1) - -#define LM3697_REG_IMAX_A 0x17 -#define LM3697_REG_IMAX_B 0x18 - -#define LM3697_REG_FEEDBACK_ENABLE 0x19 - -#define LM3697_REG_BRT_A_LSB 0x20 -#define LM3697_REG_BRT_A_MSB 0x21 -#define LM3697_REG_BRT_B_LSB 0x22 -#define LM3697_REG_BRT_B_MSB 0x23 - -#define LM3697_REG_ENABLE 0x24 - -#define LM3697_REG_OPEN_FAULT_STATUS 0xB0 - -#define LM3697_REG_SHORT_FAULT_STATUS 0xB2 - -#define LM3697_REG_MONITOR_ENABLE 0xB4 - -#define LM3697_MAX_REG 0xB4 #endif diff --git a/include/linux/mfd/ti-lmu.h b/include/linux/mfd/ti-lmu.h index 7762c1bce55d..54e9d272e81c 100644 --- a/include/linux/mfd/ti-lmu.h +++ b/include/linux/mfd/ti-lmu.h @@ -26,7 +26,6 @@ enum ti_lmu_id { LM3632, LM3633, LM3695, - LM3697, LMU_MAX_ID, }; -- 2.19.0
next prev parent reply other threads:[~2019-04-05 14:28 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-04-05 14:28 [PATCH v2 1/6] dt-bindings: mfd: LMU: Add the ramp up/down property Dan Murphy 2019-04-05 14:28 ` Dan Murphy 2019-04-05 14:28 ` [PATCH v2 2/6] dt-bindings: mfd: LMU: Add ti,brightness-resolution Dan Murphy 2019-04-05 14:28 ` Dan Murphy 2019-04-29 17:33 ` Rob Herring 2019-04-29 17:33 ` Rob Herring 2019-04-05 14:28 ` [PATCH v2 3/6] leds: TI LMU: Add common code for TI LMU devices Dan Murphy 2019-04-05 14:28 ` Dan Murphy 2019-04-05 14:28 ` [PATCH v2 4/6] dt-bindings: ti-lmu: Modify dt bindings for the LM3697 Dan Murphy 2019-04-05 14:28 ` Dan Murphy 2019-04-11 19:48 ` Jacek Anaszewski 2019-04-12 19:34 ` Jacek Anaszewski 2019-04-24 19:24 ` Dan Murphy 2019-04-24 19:24 ` Dan Murphy 2019-04-29 17:34 ` Rob Herring 2019-04-29 17:34 ` Rob Herring 2019-04-05 14:28 ` Dan Murphy [this message] 2019-04-05 14:28 ` [PATCH v2 5/6] mfd: ti-lmu: Remove support for LM3697 Dan Murphy 2019-04-05 14:28 ` [PATCH v2 6/6] leds: lm3697: Introduce the lm3697 driver Dan Murphy 2019-04-05 14:28 ` Dan Murphy 2019-04-29 17:32 ` [PATCH v2 1/6] dt-bindings: mfd: LMU: Add the ramp up/down property Rob Herring 2019-04-29 17:32 ` Rob Herring
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190405142855.3969-5-dmurphy@ti.com \ --to=dmurphy@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=jacek.anaszewski@gmail.com \ --cc=lee.jones@linaro.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-leds@vger.kernel.org \ --cc=pavel@ucw.cz \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.