* [igt-dev] [PATCH i-g-t v3 1/2] tests/kms_dp_dsc: Force a full modeset when we force dsc enable
@ 2019-04-09 1:46 Manasi Navare
2019-04-09 1:46 ` [igt-dev] [PATCH i-g-t v3 2/2] tests/kms_dp_dsc: Restore the value of " Manasi Navare
` (3 more replies)
0 siblings, 4 replies; 8+ messages in thread
From: Manasi Navare @ 2019-04-09 1:46 UTC (permalink / raw)
To: igt-dev; +Cc: Manasi Navare, Anusha Srivatsa, Petri Latvala
DSC enable gets configured during compute_config and needs
a full modeset to force DSC.
Sometimes in between the tests, if the initial output is same as the
mode being set for DSC then it will not do a full modeset.
So we disable the output before forcing a mode with DSC enable.
Fixes: db19bccc1c22 ("test/kms_dp_dsc: Basic KMS test to validate VESA DSC on DP/eDP")
Cc: Petri Latvala <petri.latvala@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
---
tests/kms_dp_dsc.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/tests/kms_dp_dsc.c b/tests/kms_dp_dsc.c
index da93cd74..7ba7c4ef 100644
--- a/tests/kms_dp_dsc.c
+++ b/tests/kms_dp_dsc.c
@@ -161,12 +161,17 @@ static void update_display(data_t *data, enum dsc_test_type test_type)
return;
}
+ /* Disable the output first */
+ igt_output_set_pipe(data->output, PIPE_NONE);
+ igt_display_commit(&data->display);
+
if (test_type == test_basic_dsc_enable) {
bool enabled;
igt_debug("DSC is supported on %s\n", data->conn_name);
force_dp_dsc_enable(data);
+ igt_output_set_pipe(data->output, data->pipe);
igt_create_pattern_fb(data->drm_fd, data->mode->hdisplay,
data->mode->vdisplay,
DRM_FORMAT_XRGB8888,
@@ -174,6 +179,8 @@ static void update_display(data_t *data, enum dsc_test_type test_type)
&data->fb_test_pattern);
primary = igt_output_get_plane_type(data->output,
DRM_PLANE_TYPE_PRIMARY);
+
+ /* Now set the output to the desired mode */
igt_plane_set_fb(primary, &data->fb_test_pattern);
igt_display_commit(&data->display);
@@ -187,7 +194,7 @@ static void update_display(data_t *data, enum dsc_test_type test_type)
clear_dp_dsc_enable(data);
igt_assert_f(enabled,
- "Default DSC enable failed on Connector: %s Pipe: %s",
+ "Default DSC enable failed on Connector: %s Pipe: %s\n",
data->conn_name,
kmstest_pipe_name(data->pipe));
} else {
@@ -203,7 +210,6 @@ static void run_test(data_t *data, igt_output_t *output,
for_each_pipe(&data->display, pipe) {
if (igt_pipe_connector_valid(pipe, output)) {
- igt_output_set_pipe(output, pipe);
data->pipe = pipe;
data->output = output;
update_display(data, test_type);
--
2.19.1
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [igt-dev] [PATCH i-g-t v3 2/2] tests/kms_dp_dsc: Restore the value of force dsc enable
2019-04-09 1:46 [igt-dev] [PATCH i-g-t v3 1/2] tests/kms_dp_dsc: Force a full modeset when we force dsc enable Manasi Navare
@ 2019-04-09 1:46 ` Manasi Navare
2019-04-10 12:46 ` Imre Deak
2019-04-09 2:17 ` [igt-dev] ✓ Fi.CI.BAT: success for series starting with [i-g-t,v3,1/2] tests/kms_dp_dsc: Force a full modeset when we " Patchwork
` (2 subsequent siblings)
3 siblings, 1 reply; 8+ messages in thread
From: Manasi Navare @ 2019-04-09 1:46 UTC (permalink / raw)
To: igt-dev; +Cc: Manasi Navare, Anusha Srivatsa, Petri Latvala
This patch saves off the original value of force_dsc_en and
restores it back after each test and in the igt exit handler
so that it gets restored on any failure/assertion.
Suggested-by: Imre Deak <imre.deak@intel.com>
Cc: Petri Latvala <petri.latvala@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
---
tests/kms_dp_dsc.c | 49 +++++++++++++++++++++++++++++++++++++++-------
1 file changed, 42 insertions(+), 7 deletions(-)
diff --git a/tests/kms_dp_dsc.c b/tests/kms_dp_dsc.c
index 7ba7c4ef..1bfefbf2 100644
--- a/tests/kms_dp_dsc.c
+++ b/tests/kms_dp_dsc.c
@@ -65,6 +65,9 @@ typedef struct {
char conn_name[128];
} data_t;
+bool force_dsc_en_orig;
+int force_dsc_restore_fd = -1;
+
static inline void manual(const char *expected)
{
igt_debug_manual_check("all", expected);
@@ -120,19 +123,44 @@ static void force_dp_dsc_enable(data_t *data)
igt_assert_f(ret > 0, "debugfs_write failed");
}
-static void clear_dp_dsc_enable(data_t *data)
+static bool is_force_dsc_enabled(data_t *data)
{
char file_name[128] = {0};
- int ret;
+ char buf[512];
strcpy(file_name, data->conn_name);
strcat(file_name, "/i915_dsc_fec_support");
- igt_debug ("Clearing DSC enable on %s\n", data->conn_name);
- ret = igt_sysfs_write(data->debugfs_fd, file_name, "0", 1);
- igt_assert_f(ret > 0, "debugfs_write failed");
+ igt_debugfs_read(data->drm_fd, file_name, buf);
+
+ return strstr(buf, "Force_DSC_Enable: yes");
}
-static void test_cleanup(data_t *data) {
+static void save_force_dsc_en(data_t *data)
+{
+ char file_name[128] = {0};
+
+ force_dsc_en_orig = is_force_dsc_enabled(data);
+ strcpy(file_name, data->conn_name);
+ strcat(file_name, "/i915_dsc_fec_support");
+ force_dsc_restore_fd = openat(igt_debugfs_dir(data->drm_fd),
+ file_name, O_WRONLY);
+ igt_assert(force_dsc_restore_fd >= 0);
+}
+
+static void restore_force_dsc_en(void)
+{
+ if (force_dsc_restore_fd < 0)
+ return;
+
+ igt_debug("Restoring DSC enable\n");
+ igt_assert(write(force_dsc_restore_fd, force_dsc_en_orig ? "1" : "0", 1) == 1);
+
+ close(force_dsc_restore_fd);
+ force_dsc_restore_fd = -1;
+}
+
+static void test_cleanup(data_t *data)
+{
igt_plane_t *primary;
if (data->output) {
@@ -144,6 +172,11 @@ static void test_cleanup(data_t *data) {
}
}
+static void kms_dp_dsc_exit_handler(int sig)
+{
+ restore_force_dsc_en();
+}
+
/*
* Re-probe connectors and do a modeset with DSC
@@ -169,6 +202,7 @@ static void update_display(data_t *data, enum dsc_test_type test_type)
bool enabled;
igt_debug("DSC is supported on %s\n", data->conn_name);
+ save_force_dsc_en(data);
force_dp_dsc_enable(data);
igt_output_set_pipe(data->output, data->pipe);
@@ -191,7 +225,7 @@ static void update_display(data_t *data, enum dsc_test_type test_type)
manual("RGB test pattern without corruption");
enabled = is_dp_dsc_enabled(data);
- clear_dp_dsc_enable(data);
+ restore_force_dsc_en();
igt_assert_f(enabled,
"Default DSC enable failed on Connector: %s Pipe: %s\n",
@@ -231,6 +265,7 @@ igt_main
data.drm_fd = drm_open_driver_master(DRIVER_ANY);
data.debugfs_fd = igt_debugfs_dir(data.drm_fd);
kmstest_set_vt_graphics_mode();
+ igt_install_exit_handler(kms_dp_dsc_exit_handler);
igt_display_require(&data.display, data.drm_fd);
igt_require(res = drmModeGetResources(data.drm_fd));
}
--
2.19.1
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [igt-dev] ✓ Fi.CI.BAT: success for series starting with [i-g-t,v3,1/2] tests/kms_dp_dsc: Force a full modeset when we force dsc enable
2019-04-09 1:46 [igt-dev] [PATCH i-g-t v3 1/2] tests/kms_dp_dsc: Force a full modeset when we force dsc enable Manasi Navare
2019-04-09 1:46 ` [igt-dev] [PATCH i-g-t v3 2/2] tests/kms_dp_dsc: Restore the value of " Manasi Navare
@ 2019-04-09 2:17 ` Patchwork
2019-04-09 8:35 ` [igt-dev] ✗ Fi.CI.IGT: failure " Patchwork
2019-04-10 10:51 ` [igt-dev] [PATCH i-g-t v3 1/2] " Imre Deak
3 siblings, 0 replies; 8+ messages in thread
From: Patchwork @ 2019-04-09 2:17 UTC (permalink / raw)
To: Manasi Navare; +Cc: igt-dev
== Series Details ==
Series: series starting with [i-g-t,v3,1/2] tests/kms_dp_dsc: Force a full modeset when we force dsc enable
URL : https://patchwork.freedesktop.org/series/59203/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_5891 -> IGTPW_2822
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/59203/revisions/1/mbox/
Known issues
------------
Here are the changes found in IGTPW_2822 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_ctx_create@basic-files:
- fi-gdg-551: NOTRUN -> SKIP [fdo#109271] +106
* igt@i915_selftest@live_hangcheck:
- fi-bxt-dsi: PASS -> INCOMPLETE [fdo#103927]
* igt@kms_busy@basic-flip-c:
- fi-gdg-551: NOTRUN -> SKIP [fdo#109271] / [fdo#109278]
* igt@kms_cursor_legacy@basic-flip-before-cursor-atomic:
- fi-glk-dsi: NOTRUN -> INCOMPLETE [fdo#103359] / [k.org#198133]
#### Possible fixes ####
* igt@gem_cpu_reloc@basic:
- {fi-icl-u2}: INCOMPLETE [fdo#110246] -> PASS
* igt@kms_cursor_legacy@basic-flip-after-cursor-varying-size:
- fi-glk-dsi: INCOMPLETE [fdo#103359] / [k.org#198133] -> PASS
* igt@kms_frontbuffer_tracking@basic:
- fi-icl-u3: FAIL [fdo#103167] -> PASS
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103359]: https://bugs.freedesktop.org/show_bug.cgi?id=103359
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#108569]: https://bugs.freedesktop.org/show_bug.cgi?id=108569
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109276]: https://bugs.freedesktop.org/show_bug.cgi?id=109276
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#109285]: https://bugs.freedesktop.org/show_bug.cgi?id=109285
[fdo#109289]: https://bugs.freedesktop.org/show_bug.cgi?id=109289
[fdo#109309]: https://bugs.freedesktop.org/show_bug.cgi?id=109309
[fdo#109315]: https://bugs.freedesktop.org/show_bug.cgi?id=109315
[fdo#109316]: https://bugs.freedesktop.org/show_bug.cgi?id=109316
[fdo#110246]: https://bugs.freedesktop.org/show_bug.cgi?id=110246
[k.org#198133]: https://bugzilla.kernel.org/show_bug.cgi?id=198133
Participating hosts (48 -> 41)
------------------------------
Additional (1): fi-gdg-551
Missing (8): fi-kbl-7567u fi-ilk-m540 fi-byt-squawks fi-bsw-cyan fi-apl-guc fi-ctg-p8600 fi-icl-y fi-byt-clapper
Build changes
-------------
* IGT: IGT_4932 -> IGTPW_2822
CI_DRM_5891: a46e12e83547c781a779776f33fbeeefe2978905 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_2822: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2822/
IGT_4932: 08cf63a8fac11e3594b57580331fb319241a0d69 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2822/
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
^ permalink raw reply [flat|nested] 8+ messages in thread
* [igt-dev] ✗ Fi.CI.IGT: failure for series starting with [i-g-t,v3,1/2] tests/kms_dp_dsc: Force a full modeset when we force dsc enable
2019-04-09 1:46 [igt-dev] [PATCH i-g-t v3 1/2] tests/kms_dp_dsc: Force a full modeset when we force dsc enable Manasi Navare
2019-04-09 1:46 ` [igt-dev] [PATCH i-g-t v3 2/2] tests/kms_dp_dsc: Restore the value of " Manasi Navare
2019-04-09 2:17 ` [igt-dev] ✓ Fi.CI.BAT: success for series starting with [i-g-t,v3,1/2] tests/kms_dp_dsc: Force a full modeset when we " Patchwork
@ 2019-04-09 8:35 ` Patchwork
2019-04-10 10:51 ` [igt-dev] [PATCH i-g-t v3 1/2] " Imre Deak
3 siblings, 0 replies; 8+ messages in thread
From: Patchwork @ 2019-04-09 8:35 UTC (permalink / raw)
To: Manasi Navare; +Cc: igt-dev
== Series Details ==
Series: series starting with [i-g-t,v3,1/2] tests/kms_dp_dsc: Force a full modeset when we force dsc enable
URL : https://patchwork.freedesktop.org/series/59203/
State : failure
== Summary ==
CI Bug Log - changes from CI_DRM_5891_full -> IGTPW_2822_full
====================================================
Summary
-------
**FAILURE**
Serious unknown changes coming with IGTPW_2822_full absolutely need to be
verified manually.
If you think the reported changes have nothing to do with the changes
introduced in IGTPW_2822_full, please notify your bug team to allow them
to document this new failure mode, which will reduce false positives in CI.
External URL: https://patchwork.freedesktop.org/api/1.0/series/59203/revisions/1/mbox/
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in IGTPW_2822_full:
### IGT changes ###
#### Possible regressions ####
* igt@prime_busy@wait-before-render:
- shard-iclb: PASS -> INCOMPLETE
Known issues
------------
Here are the changes found in IGTPW_2822_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_exec_schedule@independent-bsd1:
- shard-iclb: NOTRUN -> SKIP [fdo#109276] +7
* igt@gem_pread@pagefault-pread:
- shard-iclb: NOTRUN -> SKIP [fdo#109277] +1
* igt@gem_pwrite@huge-gtt-forwards:
- shard-iclb: NOTRUN -> SKIP [fdo#109290]
* igt@gem_tiled_fence_blits@normal:
- shard-iclb: PASS -> TIMEOUT [fdo#109673]
* igt@gem_tiled_swapping@non-threaded:
- shard-hsw: PASS -> INCOMPLETE [fdo#103540]
* igt@gen3_render_tiledy_blits:
- shard-iclb: NOTRUN -> SKIP [fdo#109289]
* igt@i915_pm_rpm@pc8-residency:
- shard-iclb: NOTRUN -> SKIP [fdo#109293]
* igt@kms_atomic_transition@2x-modeset-transitions-nonblocking:
- shard-iclb: NOTRUN -> SKIP [fdo#109280] +7
* igt@kms_atomic_transition@3x-modeset-transitions:
- shard-kbl: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +3
* igt@kms_busy@basic-flip-f:
- shard-apl: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +13
* igt@kms_chamelium@hdmi-edid-read:
- shard-iclb: NOTRUN -> SKIP [fdo#109284] +4
* igt@kms_color@pipe-a-degamma:
- shard-glk: PASS -> FAIL [fdo#104782] / [fdo#108145]
- shard-apl: NOTRUN -> FAIL [fdo#104782] / [fdo#108145]
- shard-kbl: PASS -> FAIL [fdo#104782] / [fdo#108145]
* igt@kms_content_protection@legacy:
- shard-iclb: NOTRUN -> SKIP [fdo#109300]
* igt@kms_cursor_crc@cursor-512x512-rapid-movement:
- shard-iclb: NOTRUN -> SKIP [fdo#109279]
* igt@kms_cursor_legacy@2x-long-flip-vs-cursor-legacy:
- shard-iclb: NOTRUN -> SKIP [fdo#109274] +3
* igt@kms_cursor_legacy@cursor-vs-flip-varying-size:
- shard-iclb: PASS -> FAIL [fdo#103355] +2
* igt@kms_flip@2x-flip-vs-expired-vblank-interruptible:
- shard-glk: PASS -> FAIL [fdo#105363]
* igt@kms_flip@flip-vs-panning-vs-hang-interruptible:
- shard-iclb: PASS -> INCOMPLETE [fdo#107713]
* igt@kms_flip@flip-vs-suspend:
- shard-snb: PASS -> DMESG-WARN [fdo#102365]
* igt@kms_force_connector_basic@prune-stale-modes:
- shard-iclb: NOTRUN -> SKIP [fdo#109285]
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-render:
- shard-iclb: NOTRUN -> FAIL [fdo#103167]
* igt@kms_frontbuffer_tracking@fbcpsr-1p-offscren-pri-shrfb-draw-mmap-wc:
- shard-kbl: NOTRUN -> SKIP [fdo#109271] +11
* igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-cur-indfb-draw-pwrite:
- shard-iclb: PASS -> FAIL [fdo#103167]
* igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-pri-indfb-draw-pwrite:
- shard-iclb: PASS -> FAIL [fdo#109247] +16
* igt@kms_frontbuffer_tracking@fbcpsr-rgb101010-draw-pwrite:
- shard-iclb: PASS -> FAIL [fdo#105682] / [fdo#109247]
* igt@kms_frontbuffer_tracking@psr-1p-primscrn-cur-indfb-draw-blt:
- shard-iclb: NOTRUN -> FAIL [fdo#109247]
* igt@kms_pipe_crc_basic@hang-read-crc-pipe-f:
- shard-iclb: NOTRUN -> SKIP [fdo#109278] +5
* igt@kms_plane@pixel-format-pipe-c-planes-source-clamping:
- shard-iclb: NOTRUN -> INCOMPLETE [fdo#110036 ]
* igt@kms_plane_alpha_blend@pipe-b-alpha-basic:
- shard-apl: NOTRUN -> FAIL [fdo#108145] +5
- shard-kbl: NOTRUN -> FAIL [fdo#108145] / [fdo#108590]
* igt@kms_psr@primary_mmap_cpu:
- shard-iclb: PASS -> FAIL [fdo#107383] / [fdo#110215] +2
* igt@kms_psr@psr2_sprite_blt:
- shard-iclb: NOTRUN -> SKIP [fdo#109441]
* igt@kms_psr@psr2_sprite_mmap_gtt:
- shard-iclb: PASS -> SKIP [fdo#109441] +1
* igt@kms_rotation_crc@multiplane-rotation-cropping-top:
- shard-kbl: PASS -> FAIL [fdo#109016]
* igt@kms_setmode@basic:
- shard-kbl: PASS -> FAIL [fdo#99912]
* igt@kms_vblank@pipe-a-ts-continuation-modeset-rpm:
- shard-apl: PASS -> FAIL [fdo#104894]
* igt@kms_vblank@pipe-b-ts-continuation-dpms-rpm:
- shard-kbl: PASS -> FAIL [fdo#104894] +2
* igt@prime_nv_api@i915_nv_reimport_twice_check_flink_name:
- shard-apl: NOTRUN -> SKIP [fdo#109271] +209
* igt@prime_nv_api@i915_self_import:
- shard-glk: NOTRUN -> SKIP [fdo#109271] +6
* igt@prime_nv_test@i915_import_gtt_mmap:
- shard-iclb: NOTRUN -> SKIP [fdo#109291]
* igt@tools_test@sysfs_l3_parity:
- shard-iclb: NOTRUN -> SKIP [fdo#109307]
* igt@v3d_get_param@get-bad-flags:
- shard-iclb: NOTRUN -> SKIP [fdo#109315]
#### Possible fixes ####
* igt@gem_exec_reloc@basic-cpu-wc-active:
- shard-iclb: INCOMPLETE [fdo#107713] -> PASS
* igt@gem_mmap_gtt@forked-big-copy-odd:
- shard-iclb: TIMEOUT [fdo#109673] -> PASS
* igt@gem_ppgtt@blt-vs-render-ctxn:
- shard-iclb: INCOMPLETE [fdo#109801] -> PASS
* igt@i915_selftest@live_workarounds:
- shard-iclb: DMESG-FAIL [fdo#108954] -> PASS
* igt@kms_color@pipe-a-ctm-max:
- shard-kbl: FAIL [fdo#108147] -> PASS
* igt@kms_cursor_crc@cursor-64x64-sliding:
- shard-apl: FAIL [fdo#103232] -> PASS
- shard-kbl: FAIL [fdo#103232] -> PASS
* igt@kms_cursor_legacy@cursor-vs-flip-atomic-transitions-varying-size:
- shard-iclb: FAIL [fdo#103355] -> PASS
* igt@kms_dp_dsc@basic-dsc-enable-edp:
- shard-iclb: SKIP [fdo#109349] -> PASS
* igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-shrfb-plflip-blt:
- shard-glk: FAIL [fdo#103167] -> PASS
* igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-cur-indfb-draw-render:
- shard-iclb: FAIL [fdo#103167] -> PASS +4
* igt@kms_frontbuffer_tracking@psr-1p-primscrn-cur-indfb-draw-pwrite:
- shard-iclb: FAIL [fdo#109247] -> PASS +8
* igt@kms_plane_scaling@pipe-a-scaler-with-rotation:
- shard-glk: SKIP [fdo#109271] / [fdo#109278] -> PASS +1
* igt@kms_plane_scaling@pipe-c-scaler-with-clipping-clamping:
- shard-iclb: INCOMPLETE [fdo#110041] -> PASS
* igt@kms_psr@psr2_primary_page_flip:
- shard-iclb: SKIP [fdo#109441] -> PASS
* igt@kms_psr@suspend:
- shard-iclb: FAIL [fdo#107383] / [fdo#110215] -> PASS
* igt@kms_rotation_crc@multiplane-rotation:
- shard-iclb: DMESG-WARN [fdo#106885] -> PASS
- shard-kbl: INCOMPLETE [fdo#103665] -> PASS
* igt@kms_vblank@pipe-b-ts-continuation-modeset-rpm:
- shard-apl: FAIL [fdo#104894] -> PASS
- shard-kbl: FAIL [fdo#104894] -> PASS +1
#### Warnings ####
* igt@i915_selftest@live_contexts:
- shard-iclb: DMESG-FAIL [fdo#108569] -> INCOMPLETE [fdo#108569]
* igt@kms_psr@cursor_render:
- shard-iclb: DMESG-WARN [fdo#110025] -> FAIL [fdo#107383] / [fdo#110215]
[fdo#102365]: https://bugs.freedesktop.org/show_bug.cgi?id=102365
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103232]: https://bugs.freedesktop.org/show_bug.cgi?id=103232
[fdo#103355]: https://bugs.freedesktop.org/show_bug.cgi?id=103355
[fdo#103540]: https://bugs.freedesktop.org/show_bug.cgi?id=103540
[fdo#103665]: https://bugs.freedesktop.org/show_bug.cgi?id=103665
[fdo#104782]: https://bugs.freedesktop.org/show_bug.cgi?id=104782
[fdo#104894]: https://bugs.freedesktop.org/show_bug.cgi?id=104894
[fdo#105363]: https://bugs.freedesktop.org/show_bug.cgi?id=105363
[fdo#105682]: https://bugs.freedesktop.org/show_bug.cgi?id=105682
[fdo#106885]: https://bugs.freedesktop.org/show_bug.cgi?id=106885
[fdo#107383]: https://bugs.freedesktop.org/show_bug.cgi?id=107383
[fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
[fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
[fdo#108147]: https://bugs.freedesktop.org/show_bug.cgi?id=108147
[fdo#108569]: https://bugs.freedesktop.org/show_bug.cgi?id=108569
[fdo#108590]: https://bugs.freedesktop.org/show_bug.cgi?id=108590
[fdo#108954]: https://bugs.freedesktop.org/show_bug.cgi?id=108954
[fdo#109016]: https://bugs.freedesktop.org/show_bug.cgi?id=109016
[fdo#109247]: https://bugs.freedesktop.org/show_bug.cgi?id=109247
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109274]: https://bugs.freedesktop.org/show_bug.cgi?id=109274
[fdo#109276]: https://bugs.freedesktop.org/show_bug.cgi?id=109276
[fdo#109277]: https://bugs.freedesktop.org/show_bug.cgi?id=109277
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#109279]: https://bugs.freedesktop.org/show_bug.cgi?id=109279
[fdo#109280]: https://bugs.freedesktop.org/show_bug.cgi?id=109280
[fdo#109284]: https://bugs.freedesktop.org/show_bug.cgi?id=109284
[fdo#109285]: https://bugs.freedesktop.org/show_bug.cgi?id=109285
[fdo#109289]: https://bugs.freedesktop.org/show_bug.cgi?id=109289
[fdo#109290]: https://bugs.freedesktop.org/show_bug.cgi?id=109290
[fdo#109291]: https://bugs.freedesktop.org/show_bug.cgi?id=109291
[fdo#109293]: https://bugs.freedesktop.org/show_bug.cgi?id=109293
[fdo#109300]: https://bugs.freedesktop.org/show_bug.cgi?id=109300
[fdo#109307]: https://bugs.freedesktop.org/show_bug.cgi?id=109307
[fdo#109315]: https://bugs.freedesktop.org/show_bug.cgi?id=109315
[fdo#109349]: https://bugs.freedesktop.org/show_bug.cgi?id=109349
[fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
[fdo#109673]: https://bugs.freedesktop.org/show_bug.cgi?id=109673
[fdo#109801]: https://bugs.freedesktop.org/show_bug.cgi?id=109801
[fdo#110025]: https://bugs.freedesktop.org/show_bug.cgi?id=110025
[fdo#110036 ]: https://bugs.freedesktop.org/show_bug.cgi?id=110036
[fdo#110041]: https://bugs.freedesktop.org/show_bug.cgi?id=110041
[fdo#110215]: https://bugs.freedesktop.org/show_bug.cgi?id=110215
[fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912
Participating hosts (10 -> 6)
------------------------------
Missing (4): pig-skl-6260u shard-skl pig-hsw-4770r pig-glk-j5005
Build changes
-------------
* IGT: IGT_4932 -> IGTPW_2822
* Piglit: piglit_4509 -> None
CI_DRM_5891: a46e12e83547c781a779776f33fbeeefe2978905 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_2822: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2822/
IGT_4932: 08cf63a8fac11e3594b57580331fb319241a0d69 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2822/
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [igt-dev] [PATCH i-g-t v3 1/2] tests/kms_dp_dsc: Force a full modeset when we force dsc enable
2019-04-09 1:46 [igt-dev] [PATCH i-g-t v3 1/2] tests/kms_dp_dsc: Force a full modeset when we force dsc enable Manasi Navare
` (2 preceding siblings ...)
2019-04-09 8:35 ` [igt-dev] ✗ Fi.CI.IGT: failure " Patchwork
@ 2019-04-10 10:51 ` Imre Deak
2019-04-10 18:10 ` Manasi Navare
3 siblings, 1 reply; 8+ messages in thread
From: Imre Deak @ 2019-04-10 10:51 UTC (permalink / raw)
To: Manasi Navare; +Cc: igt-dev, Anusha Srivatsa, Petri Latvala
On Mon, Apr 08, 2019 at 06:46:18PM -0700, Manasi Navare wrote:
> DSC enable gets configured during compute_config and needs
> a full modeset to force DSC.
> Sometimes in between the tests, if the initial output is same as the
> mode being set for DSC then it will not do a full modeset.
> So we disable the output before forcing a mode with DSC enable.
>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110270
> Fixes: db19bccc1c22 ("test/kms_dp_dsc: Basic KMS test to validate VESA DSC on DP/eDP")
> Cc: Petri Latvala <petri.latvala@intel.com>
> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
> Cc: Imre Deak <imre.deak@intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
> ---
> tests/kms_dp_dsc.c | 10 ++++++++--
> 1 file changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/tests/kms_dp_dsc.c b/tests/kms_dp_dsc.c
> index da93cd74..7ba7c4ef 100644
> --- a/tests/kms_dp_dsc.c
> +++ b/tests/kms_dp_dsc.c
> @@ -161,12 +161,17 @@ static void update_display(data_t *data, enum dsc_test_type test_type)
> return;
> }
>
> + /* Disable the output first */
> + igt_output_set_pipe(data->output, PIPE_NONE);
> + igt_display_commit(&data->display);
> +
> if (test_type == test_basic_dsc_enable) {
> bool enabled;
>
> igt_debug("DSC is supported on %s\n", data->conn_name);
> force_dp_dsc_enable(data);
>
> + igt_output_set_pipe(data->output, data->pipe);
> igt_create_pattern_fb(data->drm_fd, data->mode->hdisplay,
> data->mode->vdisplay,
> DRM_FORMAT_XRGB8888,
> @@ -174,6 +179,8 @@ static void update_display(data_t *data, enum dsc_test_type test_type)
> &data->fb_test_pattern);
> primary = igt_output_get_plane_type(data->output,
> DRM_PLANE_TYPE_PRIMARY);
> +
> + /* Now set the output to the desired mode */
> igt_plane_set_fb(primary, &data->fb_test_pattern);
> igt_display_commit(&data->display);
>
> @@ -187,7 +194,7 @@ static void update_display(data_t *data, enum dsc_test_type test_type)
> clear_dp_dsc_enable(data);
>
> igt_assert_f(enabled,
> - "Default DSC enable failed on Connector: %s Pipe: %s",
> + "Default DSC enable failed on Connector: %s Pipe: %s\n",
> data->conn_name,
> kmstest_pipe_name(data->pipe));
> } else {
> @@ -203,7 +210,6 @@ static void run_test(data_t *data, igt_output_t *output,
> for_each_pipe(&data->display, pipe) {
>
> if (igt_pipe_connector_valid(pipe, output)) {
> - igt_output_set_pipe(output, pipe);
> data->pipe = pipe;
> data->output = output;
> update_display(data, test_type);
> --
> 2.19.1
>
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [igt-dev] [PATCH i-g-t v3 2/2] tests/kms_dp_dsc: Restore the value of force dsc enable
2019-04-09 1:46 ` [igt-dev] [PATCH i-g-t v3 2/2] tests/kms_dp_dsc: Restore the value of " Manasi Navare
@ 2019-04-10 12:46 ` Imre Deak
2019-04-10 18:11 ` Manasi Navare
0 siblings, 1 reply; 8+ messages in thread
From: Imre Deak @ 2019-04-10 12:46 UTC (permalink / raw)
To: Manasi Navare; +Cc: igt-dev, Anusha Srivatsa, Petri Latvala
On Mon, Apr 08, 2019 at 06:46:19PM -0700, Manasi Navare wrote:
> This patch saves off the original value of force_dsc_en and
> restores it back after each test and in the igt exit handler
> so that it gets restored on any failure/assertion.
>
> Suggested-by: Imre Deak <imre.deak@intel.com>
> Cc: Petri Latvala <petri.latvala@intel.com>
> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
> Cc: Imre Deak <imre.deak@intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Looks good, thanks:
Reviewed-by: Imre Deak <imre.deak@intel.com>
> ---
> tests/kms_dp_dsc.c | 49 +++++++++++++++++++++++++++++++++++++++-------
> 1 file changed, 42 insertions(+), 7 deletions(-)
>
> diff --git a/tests/kms_dp_dsc.c b/tests/kms_dp_dsc.c
> index 7ba7c4ef..1bfefbf2 100644
> --- a/tests/kms_dp_dsc.c
> +++ b/tests/kms_dp_dsc.c
> @@ -65,6 +65,9 @@ typedef struct {
> char conn_name[128];
> } data_t;
>
> +bool force_dsc_en_orig;
> +int force_dsc_restore_fd = -1;
> +
> static inline void manual(const char *expected)
> {
> igt_debug_manual_check("all", expected);
> @@ -120,19 +123,44 @@ static void force_dp_dsc_enable(data_t *data)
> igt_assert_f(ret > 0, "debugfs_write failed");
> }
>
> -static void clear_dp_dsc_enable(data_t *data)
> +static bool is_force_dsc_enabled(data_t *data)
> {
> char file_name[128] = {0};
> - int ret;
> + char buf[512];
>
> strcpy(file_name, data->conn_name);
> strcat(file_name, "/i915_dsc_fec_support");
> - igt_debug ("Clearing DSC enable on %s\n", data->conn_name);
> - ret = igt_sysfs_write(data->debugfs_fd, file_name, "0", 1);
> - igt_assert_f(ret > 0, "debugfs_write failed");
> + igt_debugfs_read(data->drm_fd, file_name, buf);
> +
> + return strstr(buf, "Force_DSC_Enable: yes");
> }
>
> -static void test_cleanup(data_t *data) {
> +static void save_force_dsc_en(data_t *data)
> +{
> + char file_name[128] = {0};
> +
> + force_dsc_en_orig = is_force_dsc_enabled(data);
> + strcpy(file_name, data->conn_name);
> + strcat(file_name, "/i915_dsc_fec_support");
> + force_dsc_restore_fd = openat(igt_debugfs_dir(data->drm_fd),
> + file_name, O_WRONLY);
> + igt_assert(force_dsc_restore_fd >= 0);
> +}
> +
> +static void restore_force_dsc_en(void)
> +{
> + if (force_dsc_restore_fd < 0)
> + return;
> +
> + igt_debug("Restoring DSC enable\n");
> + igt_assert(write(force_dsc_restore_fd, force_dsc_en_orig ? "1" : "0", 1) == 1);
> +
> + close(force_dsc_restore_fd);
> + force_dsc_restore_fd = -1;
> +}
> +
> +static void test_cleanup(data_t *data)
> +{
> igt_plane_t *primary;
>
> if (data->output) {
> @@ -144,6 +172,11 @@ static void test_cleanup(data_t *data) {
> }
> }
>
> +static void kms_dp_dsc_exit_handler(int sig)
> +{
> + restore_force_dsc_en();
> +}
> +
>
> /*
> * Re-probe connectors and do a modeset with DSC
> @@ -169,6 +202,7 @@ static void update_display(data_t *data, enum dsc_test_type test_type)
> bool enabled;
>
> igt_debug("DSC is supported on %s\n", data->conn_name);
> + save_force_dsc_en(data);
> force_dp_dsc_enable(data);
>
> igt_output_set_pipe(data->output, data->pipe);
> @@ -191,7 +225,7 @@ static void update_display(data_t *data, enum dsc_test_type test_type)
> manual("RGB test pattern without corruption");
>
> enabled = is_dp_dsc_enabled(data);
> - clear_dp_dsc_enable(data);
> + restore_force_dsc_en();
>
> igt_assert_f(enabled,
> "Default DSC enable failed on Connector: %s Pipe: %s\n",
> @@ -231,6 +265,7 @@ igt_main
> data.drm_fd = drm_open_driver_master(DRIVER_ANY);
> data.debugfs_fd = igt_debugfs_dir(data.drm_fd);
> kmstest_set_vt_graphics_mode();
> + igt_install_exit_handler(kms_dp_dsc_exit_handler);
> igt_display_require(&data.display, data.drm_fd);
> igt_require(res = drmModeGetResources(data.drm_fd));
> }
> --
> 2.19.1
>
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [igt-dev] [PATCH i-g-t v3 1/2] tests/kms_dp_dsc: Force a full modeset when we force dsc enable
2019-04-10 10:51 ` [igt-dev] [PATCH i-g-t v3 1/2] " Imre Deak
@ 2019-04-10 18:10 ` Manasi Navare
0 siblings, 0 replies; 8+ messages in thread
From: Manasi Navare @ 2019-04-10 18:10 UTC (permalink / raw)
To: Imre Deak; +Cc: igt-dev, Anusha Srivatsa, Petri Latvala
Pushed, thanks for the review
Regards
Manasi
On Wed, Apr 10, 2019 at 01:51:12PM +0300, Imre Deak wrote:
> On Mon, Apr 08, 2019 at 06:46:18PM -0700, Manasi Navare wrote:
> > DSC enable gets configured during compute_config and needs
> > a full modeset to force DSC.
> > Sometimes in between the tests, if the initial output is same as the
> > mode being set for DSC then it will not do a full modeset.
> > So we disable the output before forcing a mode with DSC enable.
> >
>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110270
>
> > Fixes: db19bccc1c22 ("test/kms_dp_dsc: Basic KMS test to validate VESA DSC on DP/eDP")
> > Cc: Petri Latvala <petri.latvala@intel.com>
> > Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
> > Cc: Imre Deak <imre.deak@intel.com>
> > Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
>
> Reviewed-by: Imre Deak <imre.deak@intel.com>
>
> > ---
> > tests/kms_dp_dsc.c | 10 ++++++++--
> > 1 file changed, 8 insertions(+), 2 deletions(-)
> >
> > diff --git a/tests/kms_dp_dsc.c b/tests/kms_dp_dsc.c
> > index da93cd74..7ba7c4ef 100644
> > --- a/tests/kms_dp_dsc.c
> > +++ b/tests/kms_dp_dsc.c
> > @@ -161,12 +161,17 @@ static void update_display(data_t *data, enum dsc_test_type test_type)
> > return;
> > }
> >
> > + /* Disable the output first */
> > + igt_output_set_pipe(data->output, PIPE_NONE);
> > + igt_display_commit(&data->display);
> > +
> > if (test_type == test_basic_dsc_enable) {
> > bool enabled;
> >
> > igt_debug("DSC is supported on %s\n", data->conn_name);
> > force_dp_dsc_enable(data);
> >
> > + igt_output_set_pipe(data->output, data->pipe);
> > igt_create_pattern_fb(data->drm_fd, data->mode->hdisplay,
> > data->mode->vdisplay,
> > DRM_FORMAT_XRGB8888,
> > @@ -174,6 +179,8 @@ static void update_display(data_t *data, enum dsc_test_type test_type)
> > &data->fb_test_pattern);
> > primary = igt_output_get_plane_type(data->output,
> > DRM_PLANE_TYPE_PRIMARY);
> > +
> > + /* Now set the output to the desired mode */
> > igt_plane_set_fb(primary, &data->fb_test_pattern);
> > igt_display_commit(&data->display);
> >
> > @@ -187,7 +194,7 @@ static void update_display(data_t *data, enum dsc_test_type test_type)
> > clear_dp_dsc_enable(data);
> >
> > igt_assert_f(enabled,
> > - "Default DSC enable failed on Connector: %s Pipe: %s",
> > + "Default DSC enable failed on Connector: %s Pipe: %s\n",
> > data->conn_name,
> > kmstest_pipe_name(data->pipe));
> > } else {
> > @@ -203,7 +210,6 @@ static void run_test(data_t *data, igt_output_t *output,
> > for_each_pipe(&data->display, pipe) {
> >
> > if (igt_pipe_connector_valid(pipe, output)) {
> > - igt_output_set_pipe(output, pipe);
> > data->pipe = pipe;
> > data->output = output;
> > update_display(data, test_type);
> > --
> > 2.19.1
> >
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [igt-dev] [PATCH i-g-t v3 2/2] tests/kms_dp_dsc: Restore the value of force dsc enable
2019-04-10 12:46 ` Imre Deak
@ 2019-04-10 18:11 ` Manasi Navare
0 siblings, 0 replies; 8+ messages in thread
From: Manasi Navare @ 2019-04-10 18:11 UTC (permalink / raw)
To: Imre Deak; +Cc: igt-dev, Anusha Srivatsa, Petri Latvala
Pushed, thanks for the review
Manasi
On Wed, Apr 10, 2019 at 03:46:39PM +0300, Imre Deak wrote:
> On Mon, Apr 08, 2019 at 06:46:19PM -0700, Manasi Navare wrote:
> > This patch saves off the original value of force_dsc_en and
> > restores it back after each test and in the igt exit handler
> > so that it gets restored on any failure/assertion.
> >
> > Suggested-by: Imre Deak <imre.deak@intel.com>
> > Cc: Petri Latvala <petri.latvala@intel.com>
> > Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
> > Cc: Imre Deak <imre.deak@intel.com>
> > Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
>
> Looks good, thanks:
> Reviewed-by: Imre Deak <imre.deak@intel.com>
>
> > ---
> > tests/kms_dp_dsc.c | 49 +++++++++++++++++++++++++++++++++++++++-------
> > 1 file changed, 42 insertions(+), 7 deletions(-)
> >
> > diff --git a/tests/kms_dp_dsc.c b/tests/kms_dp_dsc.c
> > index 7ba7c4ef..1bfefbf2 100644
> > --- a/tests/kms_dp_dsc.c
> > +++ b/tests/kms_dp_dsc.c
> > @@ -65,6 +65,9 @@ typedef struct {
> > char conn_name[128];
> > } data_t;
> >
> > +bool force_dsc_en_orig;
> > +int force_dsc_restore_fd = -1;
> > +
> > static inline void manual(const char *expected)
> > {
> > igt_debug_manual_check("all", expected);
> > @@ -120,19 +123,44 @@ static void force_dp_dsc_enable(data_t *data)
> > igt_assert_f(ret > 0, "debugfs_write failed");
> > }
> >
> > -static void clear_dp_dsc_enable(data_t *data)
> > +static bool is_force_dsc_enabled(data_t *data)
> > {
> > char file_name[128] = {0};
> > - int ret;
> > + char buf[512];
> >
> > strcpy(file_name, data->conn_name);
> > strcat(file_name, "/i915_dsc_fec_support");
> > - igt_debug ("Clearing DSC enable on %s\n", data->conn_name);
> > - ret = igt_sysfs_write(data->debugfs_fd, file_name, "0", 1);
> > - igt_assert_f(ret > 0, "debugfs_write failed");
> > + igt_debugfs_read(data->drm_fd, file_name, buf);
> > +
> > + return strstr(buf, "Force_DSC_Enable: yes");
> > }
> >
> > -static void test_cleanup(data_t *data) {
> > +static void save_force_dsc_en(data_t *data)
> > +{
> > + char file_name[128] = {0};
> > +
> > + force_dsc_en_orig = is_force_dsc_enabled(data);
> > + strcpy(file_name, data->conn_name);
> > + strcat(file_name, "/i915_dsc_fec_support");
> > + force_dsc_restore_fd = openat(igt_debugfs_dir(data->drm_fd),
> > + file_name, O_WRONLY);
> > + igt_assert(force_dsc_restore_fd >= 0);
> > +}
> > +
> > +static void restore_force_dsc_en(void)
> > +{
> > + if (force_dsc_restore_fd < 0)
> > + return;
> > +
> > + igt_debug("Restoring DSC enable\n");
> > + igt_assert(write(force_dsc_restore_fd, force_dsc_en_orig ? "1" : "0", 1) == 1);
> > +
> > + close(force_dsc_restore_fd);
> > + force_dsc_restore_fd = -1;
> > +}
> > +
> > +static void test_cleanup(data_t *data)
> > +{
> > igt_plane_t *primary;
> >
> > if (data->output) {
> > @@ -144,6 +172,11 @@ static void test_cleanup(data_t *data) {
> > }
> > }
> >
> > +static void kms_dp_dsc_exit_handler(int sig)
> > +{
> > + restore_force_dsc_en();
> > +}
> > +
> >
> > /*
> > * Re-probe connectors and do a modeset with DSC
> > @@ -169,6 +202,7 @@ static void update_display(data_t *data, enum dsc_test_type test_type)
> > bool enabled;
> >
> > igt_debug("DSC is supported on %s\n", data->conn_name);
> > + save_force_dsc_en(data);
> > force_dp_dsc_enable(data);
> >
> > igt_output_set_pipe(data->output, data->pipe);
> > @@ -191,7 +225,7 @@ static void update_display(data_t *data, enum dsc_test_type test_type)
> > manual("RGB test pattern without corruption");
> >
> > enabled = is_dp_dsc_enabled(data);
> > - clear_dp_dsc_enable(data);
> > + restore_force_dsc_en();
> >
> > igt_assert_f(enabled,
> > "Default DSC enable failed on Connector: %s Pipe: %s\n",
> > @@ -231,6 +265,7 @@ igt_main
> > data.drm_fd = drm_open_driver_master(DRIVER_ANY);
> > data.debugfs_fd = igt_debugfs_dir(data.drm_fd);
> > kmstest_set_vt_graphics_mode();
> > + igt_install_exit_handler(kms_dp_dsc_exit_handler);
> > igt_display_require(&data.display, data.drm_fd);
> > igt_require(res = drmModeGetResources(data.drm_fd));
> > }
> > --
> > 2.19.1
> >
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2019-04-10 18:09 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-09 1:46 [igt-dev] [PATCH i-g-t v3 1/2] tests/kms_dp_dsc: Force a full modeset when we force dsc enable Manasi Navare
2019-04-09 1:46 ` [igt-dev] [PATCH i-g-t v3 2/2] tests/kms_dp_dsc: Restore the value of " Manasi Navare
2019-04-10 12:46 ` Imre Deak
2019-04-10 18:11 ` Manasi Navare
2019-04-09 2:17 ` [igt-dev] ✓ Fi.CI.BAT: success for series starting with [i-g-t,v3,1/2] tests/kms_dp_dsc: Force a full modeset when we " Patchwork
2019-04-09 8:35 ` [igt-dev] ✗ Fi.CI.IGT: failure " Patchwork
2019-04-10 10:51 ` [igt-dev] [PATCH i-g-t v3 1/2] " Imre Deak
2019-04-10 18:10 ` Manasi Navare
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.