[PATCH v3 00/11] Add support for Orange Pi 3

[megous@megous.com]

From: Ondrej Jirman <megous@megous.com>

This series implements support for Xunlong Orange Pi 3 board.

Unfortunately, this board needs some small driver patches, so I have
split the boards DT patch into chunks that require patches for drivers
in various subsystems.

Suggested merging plan/dependencies:

- Pinctrl and stmmac patches are needed for ethernet support.
  (patches 1-5)
- HDMI support was changed, please review. (patches 6-8)
- brcmfmac patch 9, fixing firmware file selection, can be merged
  now, after review, as it doesn't depend on anything (please
  review :))
- mmc1 pinconf (patch 10) can probably be merged now, too (it will
  certainly be used soon by all the other WiFi featuring boards
  based on H6)
- WiFi dts patch will have to wait for H6 RTC patches, which in turn
  depend on ChenYu's RTC series, to be merged. That will take a
  while yet. I'm just keeping it in the series for completness.
  (patch 11)

This patch is also needed to not get segfault on boot (it was already
merged): 
  https://lkml.org/lkml/2019/4/5/856

Changes in v2:
- added dt-bindings documentation for the board's compatible string
  (suggested by Clement)
- addressed checkpatch warnings and code formatting issues (on Maxime's
  suggestions)
- stmmac: dropped useless parenthesis, reworded description of the patch
  (suggested by Sergei)
- drop useles dev_info() about the selected io bias voltage
- docummented io voltage bias selection variant macros
- wifi: marked WiFi DTS patch and realted mmc1_pins as "DO NOT MERGE",
  because wifi depends on H6 RTC support that's not merged yet (suggested
  by Clement)
- added missing signed-of-bys
- changed &usb2otg dr_mode to otg, and added a note about VBUS
- improved wording of HDMI driver's DDC power supply patch

Changes in v3:
- dropped already applied patches
- changed pinctrl I/O bias selection constants to enum and renamed
- added /omit-if-no-ref/ to mmc1_pins
- made mmc1_pins default pinconf for mmc1 in H6 dtsi
- move ddc-supply to HDMI connector node, updated patch descriptions,
  changed dt-bindings docs

Please take a look.

thank you and regards,
  Ondrej Jirman

Icenowy Zheng (2):
  net: stmmac: sun8i: add support for Allwinner H6 EMAC
  net: stmmac: sun8i: force select external PHY when no internal one

Ondrej Jirman (9):
  pinctrl: sunxi: Prepare for alternative bias voltage setting methods
  pinctrl: sunxi: Support I/O bias voltage setting on H6
  arm64: dts: allwinner: orange-pi-3: Enable ethernet
  dt-bindings: display: hdmi-connector: Add DDC power supply
  drm: sun4i: Add support for enabling DDC I2C bus power to dw_hdmi glue
  arm64: dts: allwinner: orange-pi-3: Enable HDMI output
  brcmfmac: Loading the correct firmware for brcm43456
  arm64: dts: allwinner: h6: Add MMC1 pins
  [DO NOT MERGE] arm64: dts: allwinner: orange-pi-3: Enable WiFi

 .../display/connector/hdmi-connector.txt      |   1 +
 .../dts/allwinner/sun50i-h6-orangepi-3.dts    | 127 ++++++++++++++++++
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi  |  11 ++
 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c         |  60 ++++++++-
 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h         |   2 +
 .../net/ethernet/stmicro/stmmac/dwmac-sun8i.c |  21 +++
 .../broadcom/brcm80211/brcmfmac/sdio.c        |   4 +-
 drivers/pinctrl/sunxi/pinctrl-sun50i-h6.c     |   1 +
 drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c     |   2 +-
 drivers/pinctrl/sunxi/pinctrl-sunxi.c         |  56 +++++---
 drivers/pinctrl/sunxi/pinctrl-sunxi.h         |  14 +-
 11 files changed, 275 insertions(+), 24 deletions(-)

-- 
2.21.0