All of lore.kernel.org
 help / color / mirror / Atom feed
From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: Jonathan Cameron <jic23@kernel.org>,
	Hartmut Knaack <knaack.h@gmx.de>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
	linux-iio@vger.kernel.org
Cc: devicetree@vger.kernel.org,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Gregory CLEMENT <gregory.clement@bootlin.com>,
	Rob Herring <robh+dt@kernel.org>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/2] iio: adc: Add driver for the TI ADS8344 A/DC chips
Date: Fri, 12 Apr 2019 11:15:37 +0200	[thread overview]
Message-ID: <20190412091537.14657-3-gregory.clement@bootlin.com> (raw)
In-Reply-To: <20190412091537.14657-1-gregory.clement@bootlin.com>

This adds support for the Texas Instruments ADS8344 ADC chip. This chip
has a 16-bit 8-Channel ADC and is access directly through SPI.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
 drivers/iio/adc/Kconfig      |  10 ++
 drivers/iio/adc/Makefile     |   1 +
 drivers/iio/adc/ti-ads8344.c | 204 +++++++++++++++++++++++++++++++++++
 3 files changed, 215 insertions(+)
 create mode 100644 drivers/iio/adc/ti-ads8344.c

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 76db6e5cc296..447d3a871746 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -967,6 +967,16 @@ config TI_ADS7950
 	  To compile this driver as a module, choose M here: the
 	  module will be called ti-ads7950.
 
+config TI_ADS8344
+	tristate "Texas Instruments ADS8344"
+	depends on SPI && OF
+	help
+	  If you say yes here you get support for Texas Instruments ADS8344
+	  ADC chips
+
+	  This driver can also be built as a module. If so, the module will be
+	  called ti-ads8344.
+
 config TI_ADS8688
 	tristate "Texas Instruments ADS8688"
 	depends on SPI && OF
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 6fcebd167524..1f3ae934111d 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -87,6 +87,7 @@ obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o
 obj-$(CONFIG_TI_ADC161S626) += ti-adc161s626.o
 obj-$(CONFIG_TI_ADS1015) += ti-ads1015.o
 obj-$(CONFIG_TI_ADS7950) += ti-ads7950.o
+obj-$(CONFIG_TI_ADS8344) += ti-ads8344.o
 obj-$(CONFIG_TI_ADS8688) += ti-ads8688.o
 obj-$(CONFIG_TI_ADS124S08) += ti-ads124s08.o
 obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o
diff --git a/drivers/iio/adc/ti-ads8344.c b/drivers/iio/adc/ti-ads8344.c
new file mode 100644
index 000000000000..e1649e237edc
--- /dev/null
+++ b/drivers/iio/adc/ti-ads8344.c
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ADS8344 16-bit 8-Channel ADC driver
+ *
+ * Author: Gregory CLEMENT <gregory.clement@bootlin.com>
+ *
+ * Datasheet: http://www.ti.com/lit/ds/symlink/ads8344.pdf
+ */
+
+#include <linux/delay.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+
+#define ADS8344_START BIT(7)
+#define ADS8344_SINGLE_END BIT(2)
+#define ADS8344_CHANNEL(channel) ((channel) << 4)
+#define ADS8344_CLOCK_INTERNAL 0x2 /* PD1 = 1 and PD0 = 0 */
+
+struct ads8344 {
+	struct spi_device *spi;
+	struct regulator *reg;
+	/*
+	 * Lock protecting access to adc->tx_buff and rx_buff,
+	 * especially from concurrent read on sysfs file.
+	 */
+	struct mutex lock;
+
+	u8 tx_buf ____cacheline_aligned;
+	u16 rx_buf;
+};
+
+#define ADS8344_VOLTAGE_CHANNEL(chan, si)				\
+	{								\
+		.type = IIO_VOLTAGE,					\
+		.indexed = 1,						\
+		.channel = chan,					\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+	}
+
+#define ADS8344_VOLTAGE_CHANNEL_DIFF(chan1, chan2, si)			\
+	{								\
+		.type = IIO_VOLTAGE,					\
+		.indexed = 1,						\
+		.channel = (chan1),					\
+		.channel2 = (chan2),					\
+		.differential = 1,					\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+	}
+
+static const struct iio_chan_spec ads8344_channels[] = {
+	ADS8344_VOLTAGE_CHANNEL(0, 0),
+	ADS8344_VOLTAGE_CHANNEL(1, 4),
+	ADS8344_VOLTAGE_CHANNEL(2, 1),
+	ADS8344_VOLTAGE_CHANNEL(3, 5),
+	ADS8344_VOLTAGE_CHANNEL(4, 2),
+	ADS8344_VOLTAGE_CHANNEL(5, 6),
+	ADS8344_VOLTAGE_CHANNEL(6, 3),
+	ADS8344_VOLTAGE_CHANNEL(7, 7),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(0, 1, 8),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(2, 3, 9),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(4, 5, 10),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(6, 7, 11),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(1, 0, 12),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(3, 2, 13),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(5, 4, 14),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(7, 6, 15),
+};
+
+static int ads8344_adc_conversion(struct ads8344 *adc, int channel,
+				  bool differential)
+{
+	struct spi_device *spi = adc->spi;
+	int ret;
+
+	adc->tx_buf = ADS8344_START;
+	if (!differential)
+		adc->tx_buf |= ADS8344_SINGLE_END;
+	adc->tx_buf |= ADS8344_CHANNEL(channel);
+	adc->tx_buf |= ADS8344_CLOCK_INTERNAL;
+
+	ret = spi_write(spi, &adc->tx_buf, 1);
+	if (ret)
+		return ret;
+
+	udelay(9);
+
+	ret = spi_read(spi, &adc->rx_buf, 2);
+	if (ret)
+		return ret;
+
+	return adc->rx_buf;
+}
+
+static int ads8344_read_raw(struct iio_dev *iio,
+			    struct iio_chan_spec const *channel, int *value,
+			    int *shift, long mask)
+{
+	struct ads8344 *adc = iio_priv(iio);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&adc->lock);
+		*value = ads8344_adc_conversion(adc, channel->scan_index,
+						channel->differential);
+		mutex_unlock(&adc->lock);
+		if (*value < 0)
+			return *value;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*value = regulator_get_voltage(adc->reg);
+		if (*value < 0)
+			return *value;
+
+		/* convert regulator output voltage to mV */
+		*value /= 1000;
+		*shift = 16;
+
+		return IIO_VAL_FRACTIONAL_LOG2;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info ads8344_info = {
+	.read_raw = ads8344_read_raw,
+};
+
+static int ads8344_probe(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev;
+	struct ads8344 *adc;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	adc = iio_priv(indio_dev);
+	adc->spi = spi;
+	mutex_init(&adc->lock);
+
+	indio_dev->name = dev_name(&spi->dev);
+	indio_dev->dev.parent = &spi->dev;
+	indio_dev->dev.of_node = spi->dev.of_node;
+	indio_dev->info = &ads8344_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = ads8344_channels;
+	indio_dev->num_channels = ARRAY_SIZE(ads8344_channels);
+
+	adc->reg = devm_regulator_get(&spi->dev, "vref");
+	if (IS_ERR(adc->reg))
+		return PTR_ERR(adc->reg);
+
+	ret = regulator_enable(adc->reg);
+	if (ret)
+		return ret;
+
+	spi_set_drvdata(spi, indio_dev);
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		regulator_disable(adc->reg);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ads8344_remove(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev = spi_get_drvdata(spi);
+	struct ads8344 *adc = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	regulator_disable(adc->reg);
+
+	return 0;
+}
+
+static const struct of_device_id ads8344_of_match[] = {
+	{ .compatible = "ti,ads8344", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, ads8344_dt_ids);
+
+static struct spi_driver ads8344_driver = {
+	.driver = {
+		.name = "ads8344",
+		.of_match_table = ads8344_of_match,
+	},
+	.probe = ads8344_probe,
+	.remove = ads8344_remove,
+};
+module_spi_driver(ads8344_driver);
+
+MODULE_AUTHOR("Gregory CLEMENT <gregory.clement@bootlin.com>");
+MODULE_DESCRIPTION("ADS8344 driver");
+MODULE_LICENSE("GPL");
-- 
2.20.1

WARNING: multiple messages have this Message-ID (diff)
From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: Jonathan Cameron <jic23@kernel.org>,
	Hartmut Knaack <knaack.h@gmx.de>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
	linux-iio@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>,
	devicetree@vger.kernel.org,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	linux-arm-kernel@lists.infradead.org,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Gregory CLEMENT <gregory.clement@bootlin.com>
Subject: [PATCH v3 2/2] iio: adc: Add driver for the TI ADS8344 A/DC chips
Date: Fri, 12 Apr 2019 11:15:37 +0200	[thread overview]
Message-ID: <20190412091537.14657-3-gregory.clement@bootlin.com> (raw)
In-Reply-To: <20190412091537.14657-1-gregory.clement@bootlin.com>

This adds support for the Texas Instruments ADS8344 ADC chip. This chip
has a 16-bit 8-Channel ADC and is access directly through SPI.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
 drivers/iio/adc/Kconfig      |  10 ++
 drivers/iio/adc/Makefile     |   1 +
 drivers/iio/adc/ti-ads8344.c | 204 +++++++++++++++++++++++++++++++++++
 3 files changed, 215 insertions(+)
 create mode 100644 drivers/iio/adc/ti-ads8344.c

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 76db6e5cc296..447d3a871746 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -967,6 +967,16 @@ config TI_ADS7950
 	  To compile this driver as a module, choose M here: the
 	  module will be called ti-ads7950.
 
+config TI_ADS8344
+	tristate "Texas Instruments ADS8344"
+	depends on SPI && OF
+	help
+	  If you say yes here you get support for Texas Instruments ADS8344
+	  ADC chips
+
+	  This driver can also be built as a module. If so, the module will be
+	  called ti-ads8344.
+
 config TI_ADS8688
 	tristate "Texas Instruments ADS8688"
 	depends on SPI && OF
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 6fcebd167524..1f3ae934111d 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -87,6 +87,7 @@ obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o
 obj-$(CONFIG_TI_ADC161S626) += ti-adc161s626.o
 obj-$(CONFIG_TI_ADS1015) += ti-ads1015.o
 obj-$(CONFIG_TI_ADS7950) += ti-ads7950.o
+obj-$(CONFIG_TI_ADS8344) += ti-ads8344.o
 obj-$(CONFIG_TI_ADS8688) += ti-ads8688.o
 obj-$(CONFIG_TI_ADS124S08) += ti-ads124s08.o
 obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o
diff --git a/drivers/iio/adc/ti-ads8344.c b/drivers/iio/adc/ti-ads8344.c
new file mode 100644
index 000000000000..e1649e237edc
--- /dev/null
+++ b/drivers/iio/adc/ti-ads8344.c
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ADS8344 16-bit 8-Channel ADC driver
+ *
+ * Author: Gregory CLEMENT <gregory.clement@bootlin.com>
+ *
+ * Datasheet: http://www.ti.com/lit/ds/symlink/ads8344.pdf
+ */
+
+#include <linux/delay.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+
+#define ADS8344_START BIT(7)
+#define ADS8344_SINGLE_END BIT(2)
+#define ADS8344_CHANNEL(channel) ((channel) << 4)
+#define ADS8344_CLOCK_INTERNAL 0x2 /* PD1 = 1 and PD0 = 0 */
+
+struct ads8344 {
+	struct spi_device *spi;
+	struct regulator *reg;
+	/*
+	 * Lock protecting access to adc->tx_buff and rx_buff,
+	 * especially from concurrent read on sysfs file.
+	 */
+	struct mutex lock;
+
+	u8 tx_buf ____cacheline_aligned;
+	u16 rx_buf;
+};
+
+#define ADS8344_VOLTAGE_CHANNEL(chan, si)				\
+	{								\
+		.type = IIO_VOLTAGE,					\
+		.indexed = 1,						\
+		.channel = chan,					\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+	}
+
+#define ADS8344_VOLTAGE_CHANNEL_DIFF(chan1, chan2, si)			\
+	{								\
+		.type = IIO_VOLTAGE,					\
+		.indexed = 1,						\
+		.channel = (chan1),					\
+		.channel2 = (chan2),					\
+		.differential = 1,					\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+	}
+
+static const struct iio_chan_spec ads8344_channels[] = {
+	ADS8344_VOLTAGE_CHANNEL(0, 0),
+	ADS8344_VOLTAGE_CHANNEL(1, 4),
+	ADS8344_VOLTAGE_CHANNEL(2, 1),
+	ADS8344_VOLTAGE_CHANNEL(3, 5),
+	ADS8344_VOLTAGE_CHANNEL(4, 2),
+	ADS8344_VOLTAGE_CHANNEL(5, 6),
+	ADS8344_VOLTAGE_CHANNEL(6, 3),
+	ADS8344_VOLTAGE_CHANNEL(7, 7),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(0, 1, 8),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(2, 3, 9),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(4, 5, 10),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(6, 7, 11),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(1, 0, 12),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(3, 2, 13),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(5, 4, 14),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(7, 6, 15),
+};
+
+static int ads8344_adc_conversion(struct ads8344 *adc, int channel,
+				  bool differential)
+{
+	struct spi_device *spi = adc->spi;
+	int ret;
+
+	adc->tx_buf = ADS8344_START;
+	if (!differential)
+		adc->tx_buf |= ADS8344_SINGLE_END;
+	adc->tx_buf |= ADS8344_CHANNEL(channel);
+	adc->tx_buf |= ADS8344_CLOCK_INTERNAL;
+
+	ret = spi_write(spi, &adc->tx_buf, 1);
+	if (ret)
+		return ret;
+
+	udelay(9);
+
+	ret = spi_read(spi, &adc->rx_buf, 2);
+	if (ret)
+		return ret;
+
+	return adc->rx_buf;
+}
+
+static int ads8344_read_raw(struct iio_dev *iio,
+			    struct iio_chan_spec const *channel, int *value,
+			    int *shift, long mask)
+{
+	struct ads8344 *adc = iio_priv(iio);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&adc->lock);
+		*value = ads8344_adc_conversion(adc, channel->scan_index,
+						channel->differential);
+		mutex_unlock(&adc->lock);
+		if (*value < 0)
+			return *value;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*value = regulator_get_voltage(adc->reg);
+		if (*value < 0)
+			return *value;
+
+		/* convert regulator output voltage to mV */
+		*value /= 1000;
+		*shift = 16;
+
+		return IIO_VAL_FRACTIONAL_LOG2;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info ads8344_info = {
+	.read_raw = ads8344_read_raw,
+};
+
+static int ads8344_probe(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev;
+	struct ads8344 *adc;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	adc = iio_priv(indio_dev);
+	adc->spi = spi;
+	mutex_init(&adc->lock);
+
+	indio_dev->name = dev_name(&spi->dev);
+	indio_dev->dev.parent = &spi->dev;
+	indio_dev->dev.of_node = spi->dev.of_node;
+	indio_dev->info = &ads8344_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = ads8344_channels;
+	indio_dev->num_channels = ARRAY_SIZE(ads8344_channels);
+
+	adc->reg = devm_regulator_get(&spi->dev, "vref");
+	if (IS_ERR(adc->reg))
+		return PTR_ERR(adc->reg);
+
+	ret = regulator_enable(adc->reg);
+	if (ret)
+		return ret;
+
+	spi_set_drvdata(spi, indio_dev);
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		regulator_disable(adc->reg);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ads8344_remove(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev = spi_get_drvdata(spi);
+	struct ads8344 *adc = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	regulator_disable(adc->reg);
+
+	return 0;
+}
+
+static const struct of_device_id ads8344_of_match[] = {
+	{ .compatible = "ti,ads8344", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, ads8344_dt_ids);
+
+static struct spi_driver ads8344_driver = {
+	.driver = {
+		.name = "ads8344",
+		.of_match_table = ads8344_of_match,
+	},
+	.probe = ads8344_probe,
+	.remove = ads8344_remove,
+};
+module_spi_driver(ads8344_driver);
+
+MODULE_AUTHOR("Gregory CLEMENT <gregory.clement@bootlin.com>");
+MODULE_DESCRIPTION("ADS8344 driver");
+MODULE_LICENSE("GPL");
-- 
2.20.1


WARNING: multiple messages have this Message-ID (diff)
From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: Jonathan Cameron <jic23@kernel.org>,
	Hartmut Knaack <knaack.h@gmx.de>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
	linux-iio@vger.kernel.org
Cc: devicetree@vger.kernel.org,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Gregory CLEMENT <gregory.clement@bootlin.com>,
	Rob Herring <robh+dt@kernel.org>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/2] iio: adc: Add driver for the TI ADS8344 A/DC chips
Date: Fri, 12 Apr 2019 11:15:37 +0200	[thread overview]
Message-ID: <20190412091537.14657-3-gregory.clement@bootlin.com> (raw)
In-Reply-To: <20190412091537.14657-1-gregory.clement@bootlin.com>

This adds support for the Texas Instruments ADS8344 ADC chip. This chip
has a 16-bit 8-Channel ADC and is access directly through SPI.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
 drivers/iio/adc/Kconfig      |  10 ++
 drivers/iio/adc/Makefile     |   1 +
 drivers/iio/adc/ti-ads8344.c | 204 +++++++++++++++++++++++++++++++++++
 3 files changed, 215 insertions(+)
 create mode 100644 drivers/iio/adc/ti-ads8344.c

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 76db6e5cc296..447d3a871746 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -967,6 +967,16 @@ config TI_ADS7950
 	  To compile this driver as a module, choose M here: the
 	  module will be called ti-ads7950.
 
+config TI_ADS8344
+	tristate "Texas Instruments ADS8344"
+	depends on SPI && OF
+	help
+	  If you say yes here you get support for Texas Instruments ADS8344
+	  ADC chips
+
+	  This driver can also be built as a module. If so, the module will be
+	  called ti-ads8344.
+
 config TI_ADS8688
 	tristate "Texas Instruments ADS8688"
 	depends on SPI && OF
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 6fcebd167524..1f3ae934111d 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -87,6 +87,7 @@ obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o
 obj-$(CONFIG_TI_ADC161S626) += ti-adc161s626.o
 obj-$(CONFIG_TI_ADS1015) += ti-ads1015.o
 obj-$(CONFIG_TI_ADS7950) += ti-ads7950.o
+obj-$(CONFIG_TI_ADS8344) += ti-ads8344.o
 obj-$(CONFIG_TI_ADS8688) += ti-ads8688.o
 obj-$(CONFIG_TI_ADS124S08) += ti-ads124s08.o
 obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o
diff --git a/drivers/iio/adc/ti-ads8344.c b/drivers/iio/adc/ti-ads8344.c
new file mode 100644
index 000000000000..e1649e237edc
--- /dev/null
+++ b/drivers/iio/adc/ti-ads8344.c
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ADS8344 16-bit 8-Channel ADC driver
+ *
+ * Author: Gregory CLEMENT <gregory.clement@bootlin.com>
+ *
+ * Datasheet: http://www.ti.com/lit/ds/symlink/ads8344.pdf
+ */
+
+#include <linux/delay.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+
+#define ADS8344_START BIT(7)
+#define ADS8344_SINGLE_END BIT(2)
+#define ADS8344_CHANNEL(channel) ((channel) << 4)
+#define ADS8344_CLOCK_INTERNAL 0x2 /* PD1 = 1 and PD0 = 0 */
+
+struct ads8344 {
+	struct spi_device *spi;
+	struct regulator *reg;
+	/*
+	 * Lock protecting access to adc->tx_buff and rx_buff,
+	 * especially from concurrent read on sysfs file.
+	 */
+	struct mutex lock;
+
+	u8 tx_buf ____cacheline_aligned;
+	u16 rx_buf;
+};
+
+#define ADS8344_VOLTAGE_CHANNEL(chan, si)				\
+	{								\
+		.type = IIO_VOLTAGE,					\
+		.indexed = 1,						\
+		.channel = chan,					\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+	}
+
+#define ADS8344_VOLTAGE_CHANNEL_DIFF(chan1, chan2, si)			\
+	{								\
+		.type = IIO_VOLTAGE,					\
+		.indexed = 1,						\
+		.channel = (chan1),					\
+		.channel2 = (chan2),					\
+		.differential = 1,					\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+	}
+
+static const struct iio_chan_spec ads8344_channels[] = {
+	ADS8344_VOLTAGE_CHANNEL(0, 0),
+	ADS8344_VOLTAGE_CHANNEL(1, 4),
+	ADS8344_VOLTAGE_CHANNEL(2, 1),
+	ADS8344_VOLTAGE_CHANNEL(3, 5),
+	ADS8344_VOLTAGE_CHANNEL(4, 2),
+	ADS8344_VOLTAGE_CHANNEL(5, 6),
+	ADS8344_VOLTAGE_CHANNEL(6, 3),
+	ADS8344_VOLTAGE_CHANNEL(7, 7),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(0, 1, 8),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(2, 3, 9),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(4, 5, 10),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(6, 7, 11),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(1, 0, 12),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(3, 2, 13),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(5, 4, 14),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(7, 6, 15),
+};
+
+static int ads8344_adc_conversion(struct ads8344 *adc, int channel,
+				  bool differential)
+{
+	struct spi_device *spi = adc->spi;
+	int ret;
+
+	adc->tx_buf = ADS8344_START;
+	if (!differential)
+		adc->tx_buf |= ADS8344_SINGLE_END;
+	adc->tx_buf |= ADS8344_CHANNEL(channel);
+	adc->tx_buf |= ADS8344_CLOCK_INTERNAL;
+
+	ret = spi_write(spi, &adc->tx_buf, 1);
+	if (ret)
+		return ret;
+
+	udelay(9);
+
+	ret = spi_read(spi, &adc->rx_buf, 2);
+	if (ret)
+		return ret;
+
+	return adc->rx_buf;
+}
+
+static int ads8344_read_raw(struct iio_dev *iio,
+			    struct iio_chan_spec const *channel, int *value,
+			    int *shift, long mask)
+{
+	struct ads8344 *adc = iio_priv(iio);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&adc->lock);
+		*value = ads8344_adc_conversion(adc, channel->scan_index,
+						channel->differential);
+		mutex_unlock(&adc->lock);
+		if (*value < 0)
+			return *value;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*value = regulator_get_voltage(adc->reg);
+		if (*value < 0)
+			return *value;
+
+		/* convert regulator output voltage to mV */
+		*value /= 1000;
+		*shift = 16;
+
+		return IIO_VAL_FRACTIONAL_LOG2;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info ads8344_info = {
+	.read_raw = ads8344_read_raw,
+};
+
+static int ads8344_probe(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev;
+	struct ads8344 *adc;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	adc = iio_priv(indio_dev);
+	adc->spi = spi;
+	mutex_init(&adc->lock);
+
+	indio_dev->name = dev_name(&spi->dev);
+	indio_dev->dev.parent = &spi->dev;
+	indio_dev->dev.of_node = spi->dev.of_node;
+	indio_dev->info = &ads8344_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = ads8344_channels;
+	indio_dev->num_channels = ARRAY_SIZE(ads8344_channels);
+
+	adc->reg = devm_regulator_get(&spi->dev, "vref");
+	if (IS_ERR(adc->reg))
+		return PTR_ERR(adc->reg);
+
+	ret = regulator_enable(adc->reg);
+	if (ret)
+		return ret;
+
+	spi_set_drvdata(spi, indio_dev);
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		regulator_disable(adc->reg);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ads8344_remove(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev = spi_get_drvdata(spi);
+	struct ads8344 *adc = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	regulator_disable(adc->reg);
+
+	return 0;
+}
+
+static const struct of_device_id ads8344_of_match[] = {
+	{ .compatible = "ti,ads8344", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, ads8344_dt_ids);
+
+static struct spi_driver ads8344_driver = {
+	.driver = {
+		.name = "ads8344",
+		.of_match_table = ads8344_of_match,
+	},
+	.probe = ads8344_probe,
+	.remove = ads8344_remove,
+};
+module_spi_driver(ads8344_driver);
+
+MODULE_AUTHOR("Gregory CLEMENT <gregory.clement@bootlin.com>");
+MODULE_DESCRIPTION("ADS8344 driver");
+MODULE_LICENSE("GPL");
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-04-12  9:15 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-12  9:15 [PATCH v3 0/2] Add support for the TI ADS8344 A/DC chips Gregory CLEMENT
2019-04-12  9:15 ` Gregory CLEMENT
2019-04-12  9:15 ` Gregory CLEMENT
2019-04-12  9:15 ` [PATCH v3 1/2] dt-bindings: iio: adc: Add bindings for " Gregory CLEMENT
2019-04-12  9:15   ` Gregory CLEMENT
2019-04-12  9:15   ` Gregory CLEMENT
2019-04-14 13:49   ` Jonathan Cameron
2019-04-14 13:49     ` Jonathan Cameron
2019-04-14 13:49     ` Jonathan Cameron
2019-04-12  9:15 ` Gregory CLEMENT [this message]
2019-04-12  9:15   ` [PATCH v3 2/2] iio: adc: Add driver for the " Gregory CLEMENT
2019-04-12  9:15   ` Gregory CLEMENT
2019-04-14 13:51   ` Jonathan Cameron
2019-04-14 13:51     ` Jonathan Cameron
2019-04-14 13:51     ` Jonathan Cameron
2019-04-14 13:55     ` Jonathan Cameron
2019-04-14 13:55       ` Jonathan Cameron
2019-04-14 13:55       ` Jonathan Cameron
2019-04-21 17:19       ` Gregory CLEMENT
2019-04-21 17:19         ` Gregory CLEMENT
2019-04-21 17:19         ` Gregory CLEMENT
2019-04-22  9:32         ` Jonathan Cameron
2019-04-22  9:32           ` Jonathan Cameron
2019-04-22  9:32           ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190412091537.14657-3-gregory.clement@bootlin.com \
    --to=gregory.clement@bootlin.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=pmeerw@pmeerw.net \
    --cc=robh+dt@kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.