All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vidya Sagar <vidyas@nvidia.com>
To: bhelgaas@google.com, robh+dt@kernel.org, mark.rutland@arm.com,
	thierry.reding@gmail.com, jonathanh@nvidia.com, kishon@ti.com,
	catalin.marinas@arm.com, will.deacon@arm.com,
	lorenzo.pieralisi@arm.com, jingoohan1@gmail.com,
	gustavo.pimentel@synopsys.com
Cc: mperttunen@nvidia.com, linux-pci@vger.kernel.org,
	devicetree@vger.kernel.org, linux-tegra@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, kthota@nvidia.com,
	mmaddireddy@nvidia.com, vidyas@nvidia.com, sagar.tv@gmail.com
Subject: [PATCH V3 00/16] Add Tegra194 PCIe support
Date: Wed, 17 Apr 2019 00:57:14 +0530	[thread overview]
Message-ID: <20190416192730.15681-1-vidyas@nvidia.com> (raw)

Tegra194 has six PCIe controllers based on Synopsys DesignWare core.
There are two Universal PHY (UPHY) blocks with each supporting 12(HSIO:
Hisg Speed IO) and 8(NVHS: NVIDIA High Speed) lanes respectively.
Controllers:0~4 use UPHY lanes from HSIO brick whereas Controller:5 uses
UPHY lanes from NVHS brick. Lane mapping in HSIO UPHY brick to each PCIe
controller (0~4) is controlled in XBAR module by BPMP-FW. Since PCIe
core has PIPE interface, a glue module called PIPE-to-UPHY (P2U) is used
to connect each UPHY lane (applicable to both HSIO and NVHS UPHY bricks)
to PCIe controller
This patch series
- Adds support for P2U PHY driver
- Adds support for PCIe host controller
- Adds device tree nodes each PCIe controllers
- Enables nodes applicable to p2972-0000 platform
- Adds helper APIs in Designware core driver to get capability regs offset
- Adds defines for new feature registers of PCIe spec revision 4
- Makes changes in DesignWare core driver to get Tegra194 PCIe working

Testing done on P2972-0000 platform
- Able to get PCIe link up with on-board Marvel eSATA controller
- Able to get PCIe link up with NVMe cards connected to M.2 Key-M slot
- Able to do data transfers with both SATA drives and NVMe cards

Note
- Enabling x8 slot on P2972-0000 platform requires pinmux driver for Tegra194.
  It is being worked on currently and hence Controller:5 (i.e. x8 slot) is
  disabled in this patch series. A future patch series would enable this.
- This series is based on top of the following series
  Jisheng's patches to add support to .remove() in Designware sub-system
  https://patchwork.kernel.org/project/linux-pci/list/?series=98559
  My patches made on top of Jisheng's patches to export various symbols
  https://patchwork.kernel.org/project/linux-pci/list/?series=101259

Changes since [v2]:
* Addressed review comments from Thierry

Changes since [v1]:
* Addressed review comments from Bjorn, Thierry, Jonathan, Rob & Kishon
* Added more patches in v2 series

Vidya Sagar (16):
  PCI: Add #defines for some of PCIe spec r4.0 features
  PCI/PME: Export pcie_pme_disable_msi() & pcie_pme_no_msi() APIs
  PCI: Export pcie_bus_config symbol
  PCI: dwc: Perform dbi regs write lock towards the end
  PCI: dwc: Move config space capability search API
  PCI: dwc: Add ext config space capability search API
  dt-bindings: PCI: designware: Add binding for CDM register check
  PCI: dwc: Add support to enable CDM register check
  Documentation/devicetree: Add PCIe supports-clkreq property
  dt-bindings: PCI: tegra: Add device tree support for T194
  dt-bindings: PHY: P2U: Add Tegra 194 P2U block
  arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT
  arm64: tegra: Enable PCIe slots in P2972-0000 board
  phy: tegra: Add PCIe PIPE2UPHY support
  PCI: tegra: Add Tegra194 PCIe support
  arm64: Add Tegra194 PCIe driver to defconfig

 .../bindings/pci/designware-pcie.txt          |    5 +
 .../bindings/pci/nvidia,tegra194-pcie.txt     |  187 ++
 Documentation/devicetree/bindings/pci/pci.txt |    5 +
 .../bindings/phy/phy-tegra194-p2u.txt         |   28 +
 .../arm64/boot/dts/nvidia/tegra194-p2888.dtsi |    2 +-
 .../boot/dts/nvidia/tegra194-p2972-0000.dts   |   41 +
 arch/arm64/boot/dts/nvidia/tegra194.dtsi      |  449 +++++
 arch/arm64/configs/defconfig                  |    1 +
 drivers/pci/controller/dwc/Kconfig            |   11 +
 drivers/pci/controller/dwc/Makefile           |    1 +
 .../pci/controller/dwc/pcie-designware-ep.c   |   37 +-
 .../pci/controller/dwc/pcie-designware-host.c |    3 -
 drivers/pci/controller/dwc/pcie-designware.c  |   81 +
 drivers/pci/controller/dwc/pcie-designware.h  |   12 +
 drivers/pci/controller/dwc/pcie-tegra194.c    | 1760 +++++++++++++++++
 drivers/pci/pci.c                             |    1 +
 drivers/pci/pcie/pme.c                        |   14 +-
 drivers/pci/pcie/portdrv.h                    |   16 +-
 drivers/phy/tegra/Kconfig                     |    7 +
 drivers/phy/tegra/Makefile                    |    1 +
 drivers/phy/tegra/pcie-p2u-tegra194.c         |  120 ++
 include/uapi/linux/pci_regs.h                 |   22 +-
 22 files changed, 2750 insertions(+), 54 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
 create mode 100644 Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt
 create mode 100644 drivers/pci/controller/dwc/pcie-tegra194.c
 create mode 100644 drivers/phy/tegra/pcie-p2u-tegra194.c

-- 
2.17.1

WARNING: multiple messages have this Message-ID (diff)
From: Vidya Sagar <vidyas@nvidia.com>
To: <bhelgaas@google.com>, <robh+dt@kernel.org>,
	<mark.rutland@arm.com>, <thierry.reding@gmail.com>,
	<jonathanh@nvidia.com>, <kishon@ti.com>,
	<catalin.marinas@arm.com>, <will.deacon@arm.com>,
	<lorenzo.pieralisi@arm.com>, <jingoohan1@gmail.com>,
	<gustavo.pimentel@synopsys.com>
Cc: <mperttunen@nvidia.com>, <linux-pci@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-tegra@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>, <kthota@nvidia.com>,
	<mmaddireddy@nvidia.com>, <vidyas@nvidia.com>,
	<sagar.tv@gmail.com>
Subject: [PATCH V3 00/16] Add Tegra194 PCIe support
Date: Wed, 17 Apr 2019 00:57:14 +0530	[thread overview]
Message-ID: <20190416192730.15681-1-vidyas@nvidia.com> (raw)

Tegra194 has six PCIe controllers based on Synopsys DesignWare core.
There are two Universal PHY (UPHY) blocks with each supporting 12(HSIO:
Hisg Speed IO) and 8(NVHS: NVIDIA High Speed) lanes respectively.
Controllers:0~4 use UPHY lanes from HSIO brick whereas Controller:5 uses
UPHY lanes from NVHS brick. Lane mapping in HSIO UPHY brick to each PCIe
controller (0~4) is controlled in XBAR module by BPMP-FW. Since PCIe
core has PIPE interface, a glue module called PIPE-to-UPHY (P2U) is used
to connect each UPHY lane (applicable to both HSIO and NVHS UPHY bricks)
to PCIe controller
This patch series
- Adds support for P2U PHY driver
- Adds support for PCIe host controller
- Adds device tree nodes each PCIe controllers
- Enables nodes applicable to p2972-0000 platform
- Adds helper APIs in Designware core driver to get capability regs offset
- Adds defines for new feature registers of PCIe spec revision 4
- Makes changes in DesignWare core driver to get Tegra194 PCIe working

Testing done on P2972-0000 platform
- Able to get PCIe link up with on-board Marvel eSATA controller
- Able to get PCIe link up with NVMe cards connected to M.2 Key-M slot
- Able to do data transfers with both SATA drives and NVMe cards

Note
- Enabling x8 slot on P2972-0000 platform requires pinmux driver for Tegra194.
  It is being worked on currently and hence Controller:5 (i.e. x8 slot) is
  disabled in this patch series. A future patch series would enable this.
- This series is based on top of the following series
  Jisheng's patches to add support to .remove() in Designware sub-system
  https://patchwork.kernel.org/project/linux-pci/list/?series=98559
  My patches made on top of Jisheng's patches to export various symbols
  https://patchwork.kernel.org/project/linux-pci/list/?series=101259

Changes since [v2]:
* Addressed review comments from Thierry

Changes since [v1]:
* Addressed review comments from Bjorn, Thierry, Jonathan, Rob & Kishon
* Added more patches in v2 series

Vidya Sagar (16):
  PCI: Add #defines for some of PCIe spec r4.0 features
  PCI/PME: Export pcie_pme_disable_msi() & pcie_pme_no_msi() APIs
  PCI: Export pcie_bus_config symbol
  PCI: dwc: Perform dbi regs write lock towards the end
  PCI: dwc: Move config space capability search API
  PCI: dwc: Add ext config space capability search API
  dt-bindings: PCI: designware: Add binding for CDM register check
  PCI: dwc: Add support to enable CDM register check
  Documentation/devicetree: Add PCIe supports-clkreq property
  dt-bindings: PCI: tegra: Add device tree support for T194
  dt-bindings: PHY: P2U: Add Tegra 194 P2U block
  arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT
  arm64: tegra: Enable PCIe slots in P2972-0000 board
  phy: tegra: Add PCIe PIPE2UPHY support
  PCI: tegra: Add Tegra194 PCIe support
  arm64: Add Tegra194 PCIe driver to defconfig

 .../bindings/pci/designware-pcie.txt          |    5 +
 .../bindings/pci/nvidia,tegra194-pcie.txt     |  187 ++
 Documentation/devicetree/bindings/pci/pci.txt |    5 +
 .../bindings/phy/phy-tegra194-p2u.txt         |   28 +
 .../arm64/boot/dts/nvidia/tegra194-p2888.dtsi |    2 +-
 .../boot/dts/nvidia/tegra194-p2972-0000.dts   |   41 +
 arch/arm64/boot/dts/nvidia/tegra194.dtsi      |  449 +++++
 arch/arm64/configs/defconfig                  |    1 +
 drivers/pci/controller/dwc/Kconfig            |   11 +
 drivers/pci/controller/dwc/Makefile           |    1 +
 .../pci/controller/dwc/pcie-designware-ep.c   |   37 +-
 .../pci/controller/dwc/pcie-designware-host.c |    3 -
 drivers/pci/controller/dwc/pcie-designware.c  |   81 +
 drivers/pci/controller/dwc/pcie-designware.h  |   12 +
 drivers/pci/controller/dwc/pcie-tegra194.c    | 1760 +++++++++++++++++
 drivers/pci/pci.c                             |    1 +
 drivers/pci/pcie/pme.c                        |   14 +-
 drivers/pci/pcie/portdrv.h                    |   16 +-
 drivers/phy/tegra/Kconfig                     |    7 +
 drivers/phy/tegra/Makefile                    |    1 +
 drivers/phy/tegra/pcie-p2u-tegra194.c         |  120 ++
 include/uapi/linux/pci_regs.h                 |   22 +-
 22 files changed, 2750 insertions(+), 54 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
 create mode 100644 Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt
 create mode 100644 drivers/pci/controller/dwc/pcie-tegra194.c
 create mode 100644 drivers/phy/tegra/pcie-p2u-tegra194.c

-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Vidya Sagar <vidyas@nvidia.com>
To: <bhelgaas@google.com>, <robh+dt@kernel.org>,
	<mark.rutland@arm.com>, <thierry.reding@gmail.com>,
	<jonathanh@nvidia.com>, <kishon@ti.com>,
	<catalin.marinas@arm.com>, <will.deacon@arm.com>,
	<lorenzo.pieralisi@arm.com>, <jingoohan1@gmail.com>,
	<gustavo.pimentel@synopsys.com>
Cc: devicetree@vger.kernel.org, mmaddireddy@nvidia.com,
	kthota@nvidia.com, linux-pci@vger.kernel.org,
	linux-kernel@vger.kernel.org, mperttunen@nvidia.com,
	linux-tegra@vger.kernel.org, vidyas@nvidia.com,
	linux-arm-kernel@lists.infradead.org, sagar.tv@gmail.com
Subject: [PATCH V3 00/16] Add Tegra194 PCIe support
Date: Wed, 17 Apr 2019 00:57:14 +0530	[thread overview]
Message-ID: <20190416192730.15681-1-vidyas@nvidia.com> (raw)

Tegra194 has six PCIe controllers based on Synopsys DesignWare core.
There are two Universal PHY (UPHY) blocks with each supporting 12(HSIO:
Hisg Speed IO) and 8(NVHS: NVIDIA High Speed) lanes respectively.
Controllers:0~4 use UPHY lanes from HSIO brick whereas Controller:5 uses
UPHY lanes from NVHS brick. Lane mapping in HSIO UPHY brick to each PCIe
controller (0~4) is controlled in XBAR module by BPMP-FW. Since PCIe
core has PIPE interface, a glue module called PIPE-to-UPHY (P2U) is used
to connect each UPHY lane (applicable to both HSIO and NVHS UPHY bricks)
to PCIe controller
This patch series
- Adds support for P2U PHY driver
- Adds support for PCIe host controller
- Adds device tree nodes each PCIe controllers
- Enables nodes applicable to p2972-0000 platform
- Adds helper APIs in Designware core driver to get capability regs offset
- Adds defines for new feature registers of PCIe spec revision 4
- Makes changes in DesignWare core driver to get Tegra194 PCIe working

Testing done on P2972-0000 platform
- Able to get PCIe link up with on-board Marvel eSATA controller
- Able to get PCIe link up with NVMe cards connected to M.2 Key-M slot
- Able to do data transfers with both SATA drives and NVMe cards

Note
- Enabling x8 slot on P2972-0000 platform requires pinmux driver for Tegra194.
  It is being worked on currently and hence Controller:5 (i.e. x8 slot) is
  disabled in this patch series. A future patch series would enable this.
- This series is based on top of the following series
  Jisheng's patches to add support to .remove() in Designware sub-system
  https://patchwork.kernel.org/project/linux-pci/list/?series=98559
  My patches made on top of Jisheng's patches to export various symbols
  https://patchwork.kernel.org/project/linux-pci/list/?series=101259

Changes since [v2]:
* Addressed review comments from Thierry

Changes since [v1]:
* Addressed review comments from Bjorn, Thierry, Jonathan, Rob & Kishon
* Added more patches in v2 series

Vidya Sagar (16):
  PCI: Add #defines for some of PCIe spec r4.0 features
  PCI/PME: Export pcie_pme_disable_msi() & pcie_pme_no_msi() APIs
  PCI: Export pcie_bus_config symbol
  PCI: dwc: Perform dbi regs write lock towards the end
  PCI: dwc: Move config space capability search API
  PCI: dwc: Add ext config space capability search API
  dt-bindings: PCI: designware: Add binding for CDM register check
  PCI: dwc: Add support to enable CDM register check
  Documentation/devicetree: Add PCIe supports-clkreq property
  dt-bindings: PCI: tegra: Add device tree support for T194
  dt-bindings: PHY: P2U: Add Tegra 194 P2U block
  arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT
  arm64: tegra: Enable PCIe slots in P2972-0000 board
  phy: tegra: Add PCIe PIPE2UPHY support
  PCI: tegra: Add Tegra194 PCIe support
  arm64: Add Tegra194 PCIe driver to defconfig

 .../bindings/pci/designware-pcie.txt          |    5 +
 .../bindings/pci/nvidia,tegra194-pcie.txt     |  187 ++
 Documentation/devicetree/bindings/pci/pci.txt |    5 +
 .../bindings/phy/phy-tegra194-p2u.txt         |   28 +
 .../arm64/boot/dts/nvidia/tegra194-p2888.dtsi |    2 +-
 .../boot/dts/nvidia/tegra194-p2972-0000.dts   |   41 +
 arch/arm64/boot/dts/nvidia/tegra194.dtsi      |  449 +++++
 arch/arm64/configs/defconfig                  |    1 +
 drivers/pci/controller/dwc/Kconfig            |   11 +
 drivers/pci/controller/dwc/Makefile           |    1 +
 .../pci/controller/dwc/pcie-designware-ep.c   |   37 +-
 .../pci/controller/dwc/pcie-designware-host.c |    3 -
 drivers/pci/controller/dwc/pcie-designware.c  |   81 +
 drivers/pci/controller/dwc/pcie-designware.h  |   12 +
 drivers/pci/controller/dwc/pcie-tegra194.c    | 1760 +++++++++++++++++
 drivers/pci/pci.c                             |    1 +
 drivers/pci/pcie/pme.c                        |   14 +-
 drivers/pci/pcie/portdrv.h                    |   16 +-
 drivers/phy/tegra/Kconfig                     |    7 +
 drivers/phy/tegra/Makefile                    |    1 +
 drivers/phy/tegra/pcie-p2u-tegra194.c         |  120 ++
 include/uapi/linux/pci_regs.h                 |   22 +-
 22 files changed, 2750 insertions(+), 54 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
 create mode 100644 Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt
 create mode 100644 drivers/pci/controller/dwc/pcie-tegra194.c
 create mode 100644 drivers/phy/tegra/pcie-p2u-tegra194.c

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2019-04-16 19:27 UTC|newest]

Thread overview: 81+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-16 19:27 Vidya Sagar [this message]
2019-04-16 19:27 ` [PATCH V3 00/16] Add Tegra194 PCIe support Vidya Sagar
2019-04-16 19:27 ` Vidya Sagar
2019-04-16 19:27 ` [PATCH V3 01/16] PCI: Add #defines for some of PCIe spec r4.0 features Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar
2019-04-16 19:27 ` [PATCH V3 02/16] PCI/PME: Export pcie_pme_disable_msi() & pcie_pme_no_msi() APIs Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar
2019-04-16 19:27 ` [PATCH V3 03/16] PCI: Export pcie_bus_config symbol Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar
2019-04-16 19:27 ` [PATCH V3 04/16] PCI: dwc: Perform dbi regs write lock towards the end Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar
2019-04-17  9:56   ` Gustavo Pimentel
2019-04-17  9:56     ` Gustavo Pimentel
2019-04-17  9:56     ` Gustavo Pimentel
2019-04-22  7:54     ` Jisheng Zhang
2019-04-22  7:54       ` Jisheng Zhang
2019-04-22  7:54       ` Jisheng Zhang
2019-04-23  6:11       ` Vidya Sagar
2019-04-23  6:11         ` Vidya Sagar
2019-04-23  6:11         ` Vidya Sagar
2019-04-23  9:40       ` Gustavo Pimentel
2019-04-23  9:40         ` Gustavo Pimentel
2019-04-23  9:40         ` Gustavo Pimentel
2019-04-30  0:36       ` [EXT] " Z.q. Hou
2019-04-30  0:36         ` Z.q. Hou
2019-04-30  0:36         ` Z.q. Hou
2019-04-16 19:27 ` [PATCH V3 05/16] PCI: dwc: Move config space capability search API Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar
2019-04-17  9:28   ` Gustavo Pimentel
2019-04-17  9:28     ` Gustavo Pimentel
2019-04-17  9:28     ` Gustavo Pimentel
2019-04-16 19:27 ` [PATCH V3 06/16] PCI: dwc: Add ext " Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar
2019-04-17  9:27   ` Gustavo Pimentel
2019-04-17  9:27     ` Gustavo Pimentel
2019-04-17  9:27     ` Gustavo Pimentel
2019-04-17  9:34     ` Vidya Sagar
2019-04-17  9:34       ` Vidya Sagar
2019-04-17  9:34       ` Vidya Sagar
2019-04-17  9:46       ` Gustavo Pimentel
2019-04-17  9:46         ` Gustavo Pimentel
2019-04-17  9:46         ` Gustavo Pimentel
2019-04-16 19:27 ` [PATCH V3 07/16] dt-bindings: PCI: designware: Add binding for CDM register check Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar
2019-04-16 19:27 ` [PATCH V3 08/16] PCI: dwc: Add support to enable " Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar
2019-04-17  9:39   ` Gustavo Pimentel
2019-04-17  9:39     ` Gustavo Pimentel
2019-04-17  9:39     ` Gustavo Pimentel
2019-04-16 19:27 ` [PATCH V3 09/16] Documentation/devicetree: Add PCIe supports-clkreq property Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar
2019-04-16 19:27 ` [PATCH V3 10/16] dt-bindings: PCI: tegra: Add device tree support for T194 Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar
2019-04-16 19:27 ` [PATCH V3 11/16] dt-bindings: PHY: P2U: Add Tegra 194 P2U block Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar
2019-04-16 19:27 ` [PATCH V3 12/16] arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar
2019-04-16 19:27 ` [PATCH V3 13/16] arm64: tegra: Enable PCIe slots in P2972-0000 board Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar
2019-04-16 19:27 ` [PATCH V3 14/16] phy: tegra: Add PCIe PIPE2UPHY support Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar
2019-04-16 19:27 ` [PATCH V3 15/16] PCI: tegra: Add Tegra194 PCIe support Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar
2019-04-16 19:27 ` [PATCH V3 16/16] arm64: Add Tegra194 PCIe driver to defconfig Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar
2019-04-16 19:27   ` Vidya Sagar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190416192730.15681-1-vidyas@nvidia.com \
    --to=vidyas@nvidia.com \
    --cc=bhelgaas@google.com \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=jingoohan1@gmail.com \
    --cc=jonathanh@nvidia.com \
    --cc=kishon@ti.com \
    --cc=kthota@nvidia.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=mmaddireddy@nvidia.com \
    --cc=mperttunen@nvidia.com \
    --cc=robh+dt@kernel.org \
    --cc=sagar.tv@gmail.com \
    --cc=thierry.reding@gmail.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.