* [U-Boot] [PATCH v3] spi: Zap mxs_spi driver-related code
@ 2019-04-19 6:55 Jagan Teki
2019-04-19 9:25 ` Marek Vasut
0 siblings, 1 reply; 11+ messages in thread
From: Jagan Teki @ 2019-04-19 6:55 UTC (permalink / raw)
To: u-boot
Dropped
- mxs_spi driver
- CONFIG_MXS_SPI
Dropped due to:
- no active updates
- no dm conversion
- multiple pings for asking dm-conversion
- no response for dm converted patch
- driver-model migration expiry
Cc: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v3:
- rebase on master
configs/bg0900_defconfig | 1 -
configs/mx28evk_auart_console_defconfig | 1 -
configs/mx28evk_defconfig | 1 -
configs/mx28evk_nand_defconfig | 1 -
configs/mx28evk_spi_defconfig | 1 -
drivers/spi/Kconfig | 6 -
drivers/spi/Makefile | 1 -
drivers/spi/mxs_spi.c | 358 ------------------------
8 files changed, 370 deletions(-)
delete mode 100644 drivers/spi/mxs_spi.c
diff --git a/configs/bg0900_defconfig b/configs/bg0900_defconfig
index 2c4d3e3d54..f8421ef304 100644
--- a/configs/bg0900_defconfig
+++ b/configs/bg0900_defconfig
@@ -40,5 +40,4 @@ CONFIG_SPI_FLASH_STMICRO=y
CONFIG_MII=y
CONFIG_CONS_INDEX=0
CONFIG_SPI=y
-CONFIG_MXS_SPI=y
CONFIG_OF_LIBFDT=y
diff --git a/configs/mx28evk_auart_console_defconfig b/configs/mx28evk_auart_console_defconfig
index c54b933e53..d976ea584c 100644
--- a/configs/mx28evk_auart_console_defconfig
+++ b/configs/mx28evk_auart_console_defconfig
@@ -51,7 +51,6 @@ CONFIG_SPI_FLASH_SST=y
CONFIG_MII=y
CONFIG_CONS_INDEX=0
CONFIG_SPI=y
-CONFIG_MXS_SPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
diff --git a/configs/mx28evk_defconfig b/configs/mx28evk_defconfig
index 187467d3db..40ab39ccf1 100644
--- a/configs/mx28evk_defconfig
+++ b/configs/mx28evk_defconfig
@@ -51,7 +51,6 @@ CONFIG_SPI_FLASH_SST=y
CONFIG_MII=y
CONFIG_CONS_INDEX=0
CONFIG_SPI=y
-CONFIG_MXS_SPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
diff --git a/configs/mx28evk_nand_defconfig b/configs/mx28evk_nand_defconfig
index 7d891e7934..0d2afbbdb0 100644
--- a/configs/mx28evk_nand_defconfig
+++ b/configs/mx28evk_nand_defconfig
@@ -50,7 +50,6 @@ CONFIG_SPI_FLASH_SST=y
CONFIG_MII=y
CONFIG_CONS_INDEX=0
CONFIG_SPI=y
-CONFIG_MXS_SPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
diff --git a/configs/mx28evk_spi_defconfig b/configs/mx28evk_spi_defconfig
index cb5b1b3b75..b9ea4934bb 100644
--- a/configs/mx28evk_spi_defconfig
+++ b/configs/mx28evk_spi_defconfig
@@ -50,7 +50,6 @@ CONFIG_SPI_FLASH_SST=y
CONFIG_MII=y
CONFIG_CONS_INDEX=0
CONFIG_SPI=y
-CONFIG_MXS_SPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 7043b5c0f6..955da8db64 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -370,12 +370,6 @@ config MXC_SPI
Enable the MXC SPI controller driver. This driver can be used
on various i.MX SoCs such as i.MX31/35/51/6/7.
-config MXS_SPI
- bool "MXS SPI Driver"
- help
- Enable the MXS SPI controller driver. This driver can be used
- on the i.MX23 and i.MX28 SoCs.
-
config OMAP3_SPI
bool "McSPI driver for OMAP"
help
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 25add2812d..055ef99dc9 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -40,7 +40,6 @@ obj-$(CONFIG_MT7621_SPI) += mt7621_spi.o
obj-$(CONFIG_MSCC_BB_SPI) += mscc_bb_spi.o
obj-$(CONFIG_MVEBU_A3700_SPI) += mvebu_a3700_spi.o
obj-$(CONFIG_MXC_SPI) += mxc_spi.o
-obj-$(CONFIG_MXS_SPI) += mxs_spi.o
obj-$(CONFIG_ATCSPI200_SPI) += atcspi200_spi.o
obj-$(CONFIG_OMAP3_SPI) += omap3_spi.o
obj-$(CONFIG_PIC32_SPI) += pic32_spi.o
diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c
deleted file mode 100644
index 5065e407f8..0000000000
--- a/drivers/spi/mxs_spi.c
+++ /dev/null
@@ -1,358 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Freescale i.MX28 SPI driver
- *
- * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
- * on behalf of DENX Software Engineering GmbH
- *
- * NOTE: This driver only supports the SPI-controller chipselects,
- * GPIO driven chipselects are not supported.
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <memalign.h>
-#include <spi.h>
-#include <linux/errno.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/mach-imx/dma.h>
-
-#define MXS_SPI_MAX_TIMEOUT 1000000
-#define MXS_SPI_PORT_OFFSET 0x2000
-#define MXS_SSP_CHIPSELECT_MASK 0x00300000
-#define MXS_SSP_CHIPSELECT_SHIFT 20
-
-#define MXSSSP_SMALL_TRANSFER 512
-
-struct mxs_spi_slave {
- struct spi_slave slave;
- uint32_t max_khz;
- uint32_t mode;
- struct mxs_ssp_regs *regs;
-};
-
-static inline struct mxs_spi_slave *to_mxs_slave(struct spi_slave *slave)
-{
- return container_of(slave, struct mxs_spi_slave, slave);
-}
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
- /* MXS SPI: 4 ports and 3 chip selects maximum */
- if (!mxs_ssp_bus_id_valid(bus) || cs > 2)
- return 0;
- else
- return 1;
-}
-
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
- unsigned int max_hz, unsigned int mode)
-{
- struct mxs_spi_slave *mxs_slave;
-
- if (!spi_cs_is_valid(bus, cs)) {
- printf("mxs_spi: invalid bus %d / chip select %d\n", bus, cs);
- return NULL;
- }
-
- mxs_slave = spi_alloc_slave(struct mxs_spi_slave, bus, cs);
- if (!mxs_slave)
- return NULL;
-
- if (mxs_dma_init_channel(MXS_DMA_CHANNEL_AHB_APBH_SSP0 + bus))
- goto err_init;
-
- mxs_slave->max_khz = max_hz / 1000;
- mxs_slave->mode = mode;
- mxs_slave->regs = mxs_ssp_regs_by_bus(bus);
-
- return &mxs_slave->slave;
-
-err_init:
- free(mxs_slave);
- return NULL;
-}
-
-void spi_free_slave(struct spi_slave *slave)
-{
- struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave);
- free(mxs_slave);
-}
-
-int spi_claim_bus(struct spi_slave *slave)
-{
- struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave);
- struct mxs_ssp_regs *ssp_regs = mxs_slave->regs;
- uint32_t reg = 0;
-
- mxs_reset_block(&ssp_regs->hw_ssp_ctrl0_reg);
-
- writel((slave->cs << MXS_SSP_CHIPSELECT_SHIFT) |
- SSP_CTRL0_BUS_WIDTH_ONE_BIT,
- &ssp_regs->hw_ssp_ctrl0);
-
- reg = SSP_CTRL1_SSP_MODE_SPI | SSP_CTRL1_WORD_LENGTH_EIGHT_BITS;
- reg |= (mxs_slave->mode & SPI_CPOL) ? SSP_CTRL1_POLARITY : 0;
- reg |= (mxs_slave->mode & SPI_CPHA) ? SSP_CTRL1_PHASE : 0;
- writel(reg, &ssp_regs->hw_ssp_ctrl1);
-
- writel(0, &ssp_regs->hw_ssp_cmd0);
-
- mxs_set_ssp_busclock(slave->bus, mxs_slave->max_khz);
-
- return 0;
-}
-
-void spi_release_bus(struct spi_slave *slave)
-{
-}
-
-static void mxs_spi_start_xfer(struct mxs_ssp_regs *ssp_regs)
-{
- writel(SSP_CTRL0_LOCK_CS, &ssp_regs->hw_ssp_ctrl0_set);
- writel(SSP_CTRL0_IGNORE_CRC, &ssp_regs->hw_ssp_ctrl0_clr);
-}
-
-static void mxs_spi_end_xfer(struct mxs_ssp_regs *ssp_regs)
-{
- writel(SSP_CTRL0_LOCK_CS, &ssp_regs->hw_ssp_ctrl0_clr);
- writel(SSP_CTRL0_IGNORE_CRC, &ssp_regs->hw_ssp_ctrl0_set);
-}
-
-static int mxs_spi_xfer_pio(struct mxs_spi_slave *slave,
- char *data, int length, int write, unsigned long flags)
-{
- struct mxs_ssp_regs *ssp_regs = slave->regs;
-
- if (flags & SPI_XFER_BEGIN)
- mxs_spi_start_xfer(ssp_regs);
-
- while (length--) {
- /* We transfer 1 byte */
-#if defined(CONFIG_MX23)
- writel(SSP_CTRL0_XFER_COUNT_MASK, &ssp_regs->hw_ssp_ctrl0_clr);
- writel(1, &ssp_regs->hw_ssp_ctrl0_set);
-#elif defined(CONFIG_MX28)
- writel(1, &ssp_regs->hw_ssp_xfer_size);
-#endif
-
- if ((flags & SPI_XFER_END) && !length)
- mxs_spi_end_xfer(ssp_regs);
-
- if (write)
- writel(SSP_CTRL0_READ, &ssp_regs->hw_ssp_ctrl0_clr);
- else
- writel(SSP_CTRL0_READ, &ssp_regs->hw_ssp_ctrl0_set);
-
- writel(SSP_CTRL0_RUN, &ssp_regs->hw_ssp_ctrl0_set);
-
- if (mxs_wait_mask_set(&ssp_regs->hw_ssp_ctrl0_reg,
- SSP_CTRL0_RUN, MXS_SPI_MAX_TIMEOUT)) {
- printf("MXS SPI: Timeout waiting for start\n");
- return -ETIMEDOUT;
- }
-
- if (write)
- writel(*data++, &ssp_regs->hw_ssp_data);
-
- writel(SSP_CTRL0_DATA_XFER, &ssp_regs->hw_ssp_ctrl0_set);
-
- if (!write) {
- if (mxs_wait_mask_clr(&ssp_regs->hw_ssp_status_reg,
- SSP_STATUS_FIFO_EMPTY, MXS_SPI_MAX_TIMEOUT)) {
- printf("MXS SPI: Timeout waiting for data\n");
- return -ETIMEDOUT;
- }
-
- *data = readl(&ssp_regs->hw_ssp_data);
- data++;
- }
-
- if (mxs_wait_mask_clr(&ssp_regs->hw_ssp_ctrl0_reg,
- SSP_CTRL0_RUN, MXS_SPI_MAX_TIMEOUT)) {
- printf("MXS SPI: Timeout waiting for finish\n");
- return -ETIMEDOUT;
- }
- }
-
- return 0;
-}
-
-static int mxs_spi_xfer_dma(struct mxs_spi_slave *slave,
- char *data, int length, int write, unsigned long flags)
-{
- const int xfer_max_sz = 0xff00;
- const int desc_count = DIV_ROUND_UP(length, xfer_max_sz) + 1;
- struct mxs_ssp_regs *ssp_regs = slave->regs;
- struct mxs_dma_desc *dp;
- uint32_t ctrl0;
- uint32_t cache_data_count;
- const uint32_t dstart = (uint32_t)data;
- int dmach;
- int tl;
- int ret = 0;
-
-#if defined(CONFIG_MX23)
- const int mxs_spi_pio_words = 1;
-#elif defined(CONFIG_MX28)
- const int mxs_spi_pio_words = 4;
-#endif
-
- ALLOC_CACHE_ALIGN_BUFFER(struct mxs_dma_desc, desc, desc_count);
-
- memset(desc, 0, sizeof(struct mxs_dma_desc) * desc_count);
-
- ctrl0 = readl(&ssp_regs->hw_ssp_ctrl0);
- ctrl0 |= SSP_CTRL0_DATA_XFER;
-
- if (flags & SPI_XFER_BEGIN)
- ctrl0 |= SSP_CTRL0_LOCK_CS;
- if (!write)
- ctrl0 |= SSP_CTRL0_READ;
-
- if (length % ARCH_DMA_MINALIGN)
- cache_data_count = roundup(length, ARCH_DMA_MINALIGN);
- else
- cache_data_count = length;
-
- /* Flush data to DRAM so DMA can pick them up */
- if (write)
- flush_dcache_range(dstart, dstart + cache_data_count);
-
- /* Invalidate the area, so no writeback into the RAM races with DMA */
- invalidate_dcache_range(dstart, dstart + cache_data_count);
-
- dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + slave->slave.bus;
-
- dp = desc;
- while (length) {
- dp->address = (dma_addr_t)dp;
- dp->cmd.address = (dma_addr_t)data;
-
- /*
- * This is correct, even though it does indeed look insane.
- * I hereby have to, wholeheartedly, thank Freescale Inc.,
- * for always inventing insane hardware and keeping me busy
- * and employed ;-)
- */
- if (write)
- dp->cmd.data = MXS_DMA_DESC_COMMAND_DMA_READ;
- else
- dp->cmd.data = MXS_DMA_DESC_COMMAND_DMA_WRITE;
-
- /*
- * The DMA controller can transfer large chunks (64kB) at
- * time by setting the transfer length to 0. Setting tl to
- * 0x10000 will overflow below and make .data contain 0.
- * Otherwise, 0xff00 is the transfer maximum.
- */
- if (length >= 0x10000)
- tl = 0x10000;
- else
- tl = min(length, xfer_max_sz);
-
- dp->cmd.data |=
- ((tl & 0xffff) << MXS_DMA_DESC_BYTES_OFFSET) |
- (mxs_spi_pio_words << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
- MXS_DMA_DESC_HALT_ON_TERMINATE |
- MXS_DMA_DESC_TERMINATE_FLUSH;
-
- data += tl;
- length -= tl;
-
- if (!length) {
- dp->cmd.data |= MXS_DMA_DESC_IRQ | MXS_DMA_DESC_DEC_SEM;
-
- if (flags & SPI_XFER_END) {
- ctrl0 &= ~SSP_CTRL0_LOCK_CS;
- ctrl0 |= SSP_CTRL0_IGNORE_CRC;
- }
- }
-
- /*
- * Write CTRL0, CMD0, CMD1 and XFER_SIZE registers in
- * case of MX28, write only CTRL0 in case of MX23 due
- * to the difference in register layout. It is utterly
- * essential that the XFER_SIZE register is written on
- * a per-descriptor basis with the same size as is the
- * descriptor!
- */
- dp->cmd.pio_words[0] = ctrl0;
-#ifdef CONFIG_MX28
- dp->cmd.pio_words[1] = 0;
- dp->cmd.pio_words[2] = 0;
- dp->cmd.pio_words[3] = tl;
-#endif
-
- mxs_dma_desc_append(dmach, dp);
-
- dp++;
- }
-
- if (mxs_dma_go(dmach))
- ret = -EINVAL;
-
- /* The data arrived into DRAM, invalidate cache over them */
- if (!write)
- invalidate_dcache_range(dstart, dstart + cache_data_count);
-
- return ret;
-}
-
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
- const void *dout, void *din, unsigned long flags)
-{
- struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave);
- struct mxs_ssp_regs *ssp_regs = mxs_slave->regs;
- int len = bitlen / 8;
- char dummy;
- int write = 0;
- char *data = NULL;
- int dma = 1;
-
- if (bitlen == 0) {
- if (flags & SPI_XFER_END) {
- din = (void *)&dummy;
- len = 1;
- } else
- return 0;
- }
-
- /* Half-duplex only */
- if (din && dout)
- return -EINVAL;
- /* No data */
- if (!din && !dout)
- return 0;
-
- if (dout) {
- data = (char *)dout;
- write = 1;
- } else if (din) {
- data = (char *)din;
- write = 0;
- }
-
- /*
- * Check for alignment, if the buffer is aligned, do DMA transfer,
- * PIO otherwise. This is a temporary workaround until proper bounce
- * buffer is in place.
- */
- if (dma) {
- if (((uint32_t)data) & (ARCH_DMA_MINALIGN - 1))
- dma = 0;
- if (((uint32_t)len) & (ARCH_DMA_MINALIGN - 1))
- dma = 0;
- }
-
- if (!dma || (len < MXSSSP_SMALL_TRANSFER)) {
- writel(SSP_CTRL1_DMA_ENABLE, &ssp_regs->hw_ssp_ctrl1_clr);
- return mxs_spi_xfer_pio(mxs_slave, data, len, write, flags);
- } else {
- writel(SSP_CTRL1_DMA_ENABLE, &ssp_regs->hw_ssp_ctrl1_set);
- return mxs_spi_xfer_dma(mxs_slave, data, len, write, flags);
- }
-}
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [U-Boot] [PATCH v3] spi: Zap mxs_spi driver-related code
2019-04-19 6:55 [U-Boot] [PATCH v3] spi: Zap mxs_spi driver-related code Jagan Teki
@ 2019-04-19 9:25 ` Marek Vasut
2019-04-19 12:42 ` Tom Rini
0 siblings, 1 reply; 11+ messages in thread
From: Marek Vasut @ 2019-04-19 9:25 UTC (permalink / raw)
To: u-boot
On 4/19/19 8:55 AM, Jagan Teki wrote:
> Dropped
> - mxs_spi driver
> - CONFIG_MXS_SPI
>
> Dropped due to:
> - no active updates
> - no dm conversion
> - multiple pings for asking dm-conversion
This is the first information I received ... sigh.
+CC Mans, he was working on this platform before.
> - no response for dm converted patch
> - driver-model migration expiry
>
> Cc: Marek Vasut <marex@denx.de>
> Cc: Fabio Estevam <fabio.estevam@nxp.com>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v3:
> - rebase on master
>
> configs/bg0900_defconfig | 1 -
> configs/mx28evk_auart_console_defconfig | 1 -
> configs/mx28evk_defconfig | 1 -
> configs/mx28evk_nand_defconfig | 1 -
> configs/mx28evk_spi_defconfig | 1 -
> drivers/spi/Kconfig | 6 -
> drivers/spi/Makefile | 1 -
> drivers/spi/mxs_spi.c | 358 ------------------------
> 8 files changed, 370 deletions(-)
> delete mode 100644 drivers/spi/mxs_spi.c
>
> diff --git a/configs/bg0900_defconfig b/configs/bg0900_defconfig
> index 2c4d3e3d54..f8421ef304 100644
> --- a/configs/bg0900_defconfig
> +++ b/configs/bg0900_defconfig
> @@ -40,5 +40,4 @@ CONFIG_SPI_FLASH_STMICRO=y
> CONFIG_MII=y
> CONFIG_CONS_INDEX=0
> CONFIG_SPI=y
> -CONFIG_MXS_SPI=y
> CONFIG_OF_LIBFDT=y
> diff --git a/configs/mx28evk_auart_console_defconfig b/configs/mx28evk_auart_console_defconfig
> index c54b933e53..d976ea584c 100644
> --- a/configs/mx28evk_auart_console_defconfig
> +++ b/configs/mx28evk_auart_console_defconfig
> @@ -51,7 +51,6 @@ CONFIG_SPI_FLASH_SST=y
> CONFIG_MII=y
> CONFIG_CONS_INDEX=0
> CONFIG_SPI=y
> -CONFIG_MXS_SPI=y
> CONFIG_USB=y
> CONFIG_USB_EHCI_HCD=y
> CONFIG_USB_STORAGE=y
> diff --git a/configs/mx28evk_defconfig b/configs/mx28evk_defconfig
> index 187467d3db..40ab39ccf1 100644
> --- a/configs/mx28evk_defconfig
> +++ b/configs/mx28evk_defconfig
> @@ -51,7 +51,6 @@ CONFIG_SPI_FLASH_SST=y
> CONFIG_MII=y
> CONFIG_CONS_INDEX=0
> CONFIG_SPI=y
> -CONFIG_MXS_SPI=y
> CONFIG_USB=y
> CONFIG_USB_EHCI_HCD=y
> CONFIG_USB_STORAGE=y
> diff --git a/configs/mx28evk_nand_defconfig b/configs/mx28evk_nand_defconfig
> index 7d891e7934..0d2afbbdb0 100644
> --- a/configs/mx28evk_nand_defconfig
> +++ b/configs/mx28evk_nand_defconfig
> @@ -50,7 +50,6 @@ CONFIG_SPI_FLASH_SST=y
> CONFIG_MII=y
> CONFIG_CONS_INDEX=0
> CONFIG_SPI=y
> -CONFIG_MXS_SPI=y
> CONFIG_USB=y
> CONFIG_USB_EHCI_HCD=y
> CONFIG_USB_STORAGE=y
> diff --git a/configs/mx28evk_spi_defconfig b/configs/mx28evk_spi_defconfig
> index cb5b1b3b75..b9ea4934bb 100644
> --- a/configs/mx28evk_spi_defconfig
> +++ b/configs/mx28evk_spi_defconfig
> @@ -50,7 +50,6 @@ CONFIG_SPI_FLASH_SST=y
> CONFIG_MII=y
> CONFIG_CONS_INDEX=0
> CONFIG_SPI=y
> -CONFIG_MXS_SPI=y
> CONFIG_USB=y
> CONFIG_USB_EHCI_HCD=y
> CONFIG_USB_STORAGE=y
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index 7043b5c0f6..955da8db64 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -370,12 +370,6 @@ config MXC_SPI
> Enable the MXC SPI controller driver. This driver can be used
> on various i.MX SoCs such as i.MX31/35/51/6/7.
>
> -config MXS_SPI
> - bool "MXS SPI Driver"
> - help
> - Enable the MXS SPI controller driver. This driver can be used
> - on the i.MX23 and i.MX28 SoCs.
> -
> config OMAP3_SPI
> bool "McSPI driver for OMAP"
> help
> diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
> index 25add2812d..055ef99dc9 100644
> --- a/drivers/spi/Makefile
> +++ b/drivers/spi/Makefile
> @@ -40,7 +40,6 @@ obj-$(CONFIG_MT7621_SPI) += mt7621_spi.o
> obj-$(CONFIG_MSCC_BB_SPI) += mscc_bb_spi.o
> obj-$(CONFIG_MVEBU_A3700_SPI) += mvebu_a3700_spi.o
> obj-$(CONFIG_MXC_SPI) += mxc_spi.o
> -obj-$(CONFIG_MXS_SPI) += mxs_spi.o
> obj-$(CONFIG_ATCSPI200_SPI) += atcspi200_spi.o
> obj-$(CONFIG_OMAP3_SPI) += omap3_spi.o
> obj-$(CONFIG_PIC32_SPI) += pic32_spi.o
> diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c
> deleted file mode 100644
> index 5065e407f8..0000000000
> --- a/drivers/spi/mxs_spi.c
> +++ /dev/null
> @@ -1,358 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0+
> -/*
> - * Freescale i.MX28 SPI driver
> - *
> - * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
> - * on behalf of DENX Software Engineering GmbH
> - *
> - * NOTE: This driver only supports the SPI-controller chipselects,
> - * GPIO driven chipselects are not supported.
> - */
> -
> -#include <common.h>
> -#include <malloc.h>
> -#include <memalign.h>
> -#include <spi.h>
> -#include <linux/errno.h>
> -#include <asm/io.h>
> -#include <asm/arch/clock.h>
> -#include <asm/arch/imx-regs.h>
> -#include <asm/arch/sys_proto.h>
> -#include <asm/mach-imx/dma.h>
> -
> -#define MXS_SPI_MAX_TIMEOUT 1000000
> -#define MXS_SPI_PORT_OFFSET 0x2000
> -#define MXS_SSP_CHIPSELECT_MASK 0x00300000
> -#define MXS_SSP_CHIPSELECT_SHIFT 20
> -
> -#define MXSSSP_SMALL_TRANSFER 512
> -
> -struct mxs_spi_slave {
> - struct spi_slave slave;
> - uint32_t max_khz;
> - uint32_t mode;
> - struct mxs_ssp_regs *regs;
> -};
> -
> -static inline struct mxs_spi_slave *to_mxs_slave(struct spi_slave *slave)
> -{
> - return container_of(slave, struct mxs_spi_slave, slave);
> -}
> -
> -int spi_cs_is_valid(unsigned int bus, unsigned int cs)
> -{
> - /* MXS SPI: 4 ports and 3 chip selects maximum */
> - if (!mxs_ssp_bus_id_valid(bus) || cs > 2)
> - return 0;
> - else
> - return 1;
> -}
> -
> -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
> - unsigned int max_hz, unsigned int mode)
> -{
> - struct mxs_spi_slave *mxs_slave;
> -
> - if (!spi_cs_is_valid(bus, cs)) {
> - printf("mxs_spi: invalid bus %d / chip select %d\n", bus, cs);
> - return NULL;
> - }
> -
> - mxs_slave = spi_alloc_slave(struct mxs_spi_slave, bus, cs);
> - if (!mxs_slave)
> - return NULL;
> -
> - if (mxs_dma_init_channel(MXS_DMA_CHANNEL_AHB_APBH_SSP0 + bus))
> - goto err_init;
> -
> - mxs_slave->max_khz = max_hz / 1000;
> - mxs_slave->mode = mode;
> - mxs_slave->regs = mxs_ssp_regs_by_bus(bus);
> -
> - return &mxs_slave->slave;
> -
> -err_init:
> - free(mxs_slave);
> - return NULL;
> -}
> -
> -void spi_free_slave(struct spi_slave *slave)
> -{
> - struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave);
> - free(mxs_slave);
> -}
> -
> -int spi_claim_bus(struct spi_slave *slave)
> -{
> - struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave);
> - struct mxs_ssp_regs *ssp_regs = mxs_slave->regs;
> - uint32_t reg = 0;
> -
> - mxs_reset_block(&ssp_regs->hw_ssp_ctrl0_reg);
> -
> - writel((slave->cs << MXS_SSP_CHIPSELECT_SHIFT) |
> - SSP_CTRL0_BUS_WIDTH_ONE_BIT,
> - &ssp_regs->hw_ssp_ctrl0);
> -
> - reg = SSP_CTRL1_SSP_MODE_SPI | SSP_CTRL1_WORD_LENGTH_EIGHT_BITS;
> - reg |= (mxs_slave->mode & SPI_CPOL) ? SSP_CTRL1_POLARITY : 0;
> - reg |= (mxs_slave->mode & SPI_CPHA) ? SSP_CTRL1_PHASE : 0;
> - writel(reg, &ssp_regs->hw_ssp_ctrl1);
> -
> - writel(0, &ssp_regs->hw_ssp_cmd0);
> -
> - mxs_set_ssp_busclock(slave->bus, mxs_slave->max_khz);
> -
> - return 0;
> -}
> -
> -void spi_release_bus(struct spi_slave *slave)
> -{
> -}
> -
> -static void mxs_spi_start_xfer(struct mxs_ssp_regs *ssp_regs)
> -{
> - writel(SSP_CTRL0_LOCK_CS, &ssp_regs->hw_ssp_ctrl0_set);
> - writel(SSP_CTRL0_IGNORE_CRC, &ssp_regs->hw_ssp_ctrl0_clr);
> -}
> -
> -static void mxs_spi_end_xfer(struct mxs_ssp_regs *ssp_regs)
> -{
> - writel(SSP_CTRL0_LOCK_CS, &ssp_regs->hw_ssp_ctrl0_clr);
> - writel(SSP_CTRL0_IGNORE_CRC, &ssp_regs->hw_ssp_ctrl0_set);
> -}
> -
> -static int mxs_spi_xfer_pio(struct mxs_spi_slave *slave,
> - char *data, int length, int write, unsigned long flags)
> -{
> - struct mxs_ssp_regs *ssp_regs = slave->regs;
> -
> - if (flags & SPI_XFER_BEGIN)
> - mxs_spi_start_xfer(ssp_regs);
> -
> - while (length--) {
> - /* We transfer 1 byte */
> -#if defined(CONFIG_MX23)
> - writel(SSP_CTRL0_XFER_COUNT_MASK, &ssp_regs->hw_ssp_ctrl0_clr);
> - writel(1, &ssp_regs->hw_ssp_ctrl0_set);
> -#elif defined(CONFIG_MX28)
> - writel(1, &ssp_regs->hw_ssp_xfer_size);
> -#endif
> -
> - if ((flags & SPI_XFER_END) && !length)
> - mxs_spi_end_xfer(ssp_regs);
> -
> - if (write)
> - writel(SSP_CTRL0_READ, &ssp_regs->hw_ssp_ctrl0_clr);
> - else
> - writel(SSP_CTRL0_READ, &ssp_regs->hw_ssp_ctrl0_set);
> -
> - writel(SSP_CTRL0_RUN, &ssp_regs->hw_ssp_ctrl0_set);
> -
> - if (mxs_wait_mask_set(&ssp_regs->hw_ssp_ctrl0_reg,
> - SSP_CTRL0_RUN, MXS_SPI_MAX_TIMEOUT)) {
> - printf("MXS SPI: Timeout waiting for start\n");
> - return -ETIMEDOUT;
> - }
> -
> - if (write)
> - writel(*data++, &ssp_regs->hw_ssp_data);
> -
> - writel(SSP_CTRL0_DATA_XFER, &ssp_regs->hw_ssp_ctrl0_set);
> -
> - if (!write) {
> - if (mxs_wait_mask_clr(&ssp_regs->hw_ssp_status_reg,
> - SSP_STATUS_FIFO_EMPTY, MXS_SPI_MAX_TIMEOUT)) {
> - printf("MXS SPI: Timeout waiting for data\n");
> - return -ETIMEDOUT;
> - }
> -
> - *data = readl(&ssp_regs->hw_ssp_data);
> - data++;
> - }
> -
> - if (mxs_wait_mask_clr(&ssp_regs->hw_ssp_ctrl0_reg,
> - SSP_CTRL0_RUN, MXS_SPI_MAX_TIMEOUT)) {
> - printf("MXS SPI: Timeout waiting for finish\n");
> - return -ETIMEDOUT;
> - }
> - }
> -
> - return 0;
> -}
> -
> -static int mxs_spi_xfer_dma(struct mxs_spi_slave *slave,
> - char *data, int length, int write, unsigned long flags)
> -{
> - const int xfer_max_sz = 0xff00;
> - const int desc_count = DIV_ROUND_UP(length, xfer_max_sz) + 1;
> - struct mxs_ssp_regs *ssp_regs = slave->regs;
> - struct mxs_dma_desc *dp;
> - uint32_t ctrl0;
> - uint32_t cache_data_count;
> - const uint32_t dstart = (uint32_t)data;
> - int dmach;
> - int tl;
> - int ret = 0;
> -
> -#if defined(CONFIG_MX23)
> - const int mxs_spi_pio_words = 1;
> -#elif defined(CONFIG_MX28)
> - const int mxs_spi_pio_words = 4;
> -#endif
> -
> - ALLOC_CACHE_ALIGN_BUFFER(struct mxs_dma_desc, desc, desc_count);
> -
> - memset(desc, 0, sizeof(struct mxs_dma_desc) * desc_count);
> -
> - ctrl0 = readl(&ssp_regs->hw_ssp_ctrl0);
> - ctrl0 |= SSP_CTRL0_DATA_XFER;
> -
> - if (flags & SPI_XFER_BEGIN)
> - ctrl0 |= SSP_CTRL0_LOCK_CS;
> - if (!write)
> - ctrl0 |= SSP_CTRL0_READ;
> -
> - if (length % ARCH_DMA_MINALIGN)
> - cache_data_count = roundup(length, ARCH_DMA_MINALIGN);
> - else
> - cache_data_count = length;
> -
> - /* Flush data to DRAM so DMA can pick them up */
> - if (write)
> - flush_dcache_range(dstart, dstart + cache_data_count);
> -
> - /* Invalidate the area, so no writeback into the RAM races with DMA */
> - invalidate_dcache_range(dstart, dstart + cache_data_count);
> -
> - dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + slave->slave.bus;
> -
> - dp = desc;
> - while (length) {
> - dp->address = (dma_addr_t)dp;
> - dp->cmd.address = (dma_addr_t)data;
> -
> - /*
> - * This is correct, even though it does indeed look insane.
> - * I hereby have to, wholeheartedly, thank Freescale Inc.,
> - * for always inventing insane hardware and keeping me busy
> - * and employed ;-)
> - */
> - if (write)
> - dp->cmd.data = MXS_DMA_DESC_COMMAND_DMA_READ;
> - else
> - dp->cmd.data = MXS_DMA_DESC_COMMAND_DMA_WRITE;
> -
> - /*
> - * The DMA controller can transfer large chunks (64kB) at
> - * time by setting the transfer length to 0. Setting tl to
> - * 0x10000 will overflow below and make .data contain 0.
> - * Otherwise, 0xff00 is the transfer maximum.
> - */
> - if (length >= 0x10000)
> - tl = 0x10000;
> - else
> - tl = min(length, xfer_max_sz);
> -
> - dp->cmd.data |=
> - ((tl & 0xffff) << MXS_DMA_DESC_BYTES_OFFSET) |
> - (mxs_spi_pio_words << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
> - MXS_DMA_DESC_HALT_ON_TERMINATE |
> - MXS_DMA_DESC_TERMINATE_FLUSH;
> -
> - data += tl;
> - length -= tl;
> -
> - if (!length) {
> - dp->cmd.data |= MXS_DMA_DESC_IRQ | MXS_DMA_DESC_DEC_SEM;
> -
> - if (flags & SPI_XFER_END) {
> - ctrl0 &= ~SSP_CTRL0_LOCK_CS;
> - ctrl0 |= SSP_CTRL0_IGNORE_CRC;
> - }
> - }
> -
> - /*
> - * Write CTRL0, CMD0, CMD1 and XFER_SIZE registers in
> - * case of MX28, write only CTRL0 in case of MX23 due
> - * to the difference in register layout. It is utterly
> - * essential that the XFER_SIZE register is written on
> - * a per-descriptor basis with the same size as is the
> - * descriptor!
> - */
> - dp->cmd.pio_words[0] = ctrl0;
> -#ifdef CONFIG_MX28
> - dp->cmd.pio_words[1] = 0;
> - dp->cmd.pio_words[2] = 0;
> - dp->cmd.pio_words[3] = tl;
> -#endif
> -
> - mxs_dma_desc_append(dmach, dp);
> -
> - dp++;
> - }
> -
> - if (mxs_dma_go(dmach))
> - ret = -EINVAL;
> -
> - /* The data arrived into DRAM, invalidate cache over them */
> - if (!write)
> - invalidate_dcache_range(dstart, dstart + cache_data_count);
> -
> - return ret;
> -}
> -
> -int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
> - const void *dout, void *din, unsigned long flags)
> -{
> - struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave);
> - struct mxs_ssp_regs *ssp_regs = mxs_slave->regs;
> - int len = bitlen / 8;
> - char dummy;
> - int write = 0;
> - char *data = NULL;
> - int dma = 1;
> -
> - if (bitlen == 0) {
> - if (flags & SPI_XFER_END) {
> - din = (void *)&dummy;
> - len = 1;
> - } else
> - return 0;
> - }
> -
> - /* Half-duplex only */
> - if (din && dout)
> - return -EINVAL;
> - /* No data */
> - if (!din && !dout)
> - return 0;
> -
> - if (dout) {
> - data = (char *)dout;
> - write = 1;
> - } else if (din) {
> - data = (char *)din;
> - write = 0;
> - }
> -
> - /*
> - * Check for alignment, if the buffer is aligned, do DMA transfer,
> - * PIO otherwise. This is a temporary workaround until proper bounce
> - * buffer is in place.
> - */
> - if (dma) {
> - if (((uint32_t)data) & (ARCH_DMA_MINALIGN - 1))
> - dma = 0;
> - if (((uint32_t)len) & (ARCH_DMA_MINALIGN - 1))
> - dma = 0;
> - }
> -
> - if (!dma || (len < MXSSSP_SMALL_TRANSFER)) {
> - writel(SSP_CTRL1_DMA_ENABLE, &ssp_regs->hw_ssp_ctrl1_clr);
> - return mxs_spi_xfer_pio(mxs_slave, data, len, write, flags);
> - } else {
> - writel(SSP_CTRL1_DMA_ENABLE, &ssp_regs->hw_ssp_ctrl1_set);
> - return mxs_spi_xfer_dma(mxs_slave, data, len, write, flags);
> - }
> -}
>
--
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] [PATCH v3] spi: Zap mxs_spi driver-related code
2019-04-19 9:25 ` Marek Vasut
@ 2019-04-19 12:42 ` Tom Rini
2019-04-19 13:29 ` Marek Vasut
2019-04-19 13:32 ` Michael Nazzareno Trimarchi
0 siblings, 2 replies; 11+ messages in thread
From: Tom Rini @ 2019-04-19 12:42 UTC (permalink / raw)
To: u-boot
On Fri, Apr 19, 2019 at 11:25:47AM +0200, Marek Vasut wrote:
> On 4/19/19 8:55 AM, Jagan Teki wrote:
> > Dropped
> > - mxs_spi driver
> > - CONFIG_MXS_SPI
> >
> > Dropped due to:
> > - no active updates
> > - no dm conversion
> > - multiple pings for asking dm-conversion
>
> This is the first information I received ... sigh.
Sigh, I thought you had seen this before and noted at the time that you
hadn't heard anything before then.
So, are the mx28 family boards something we still want to support? I
assume there's going to be other things that need converting there too.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190419/e1410210/attachment.sig>
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] [PATCH v3] spi: Zap mxs_spi driver-related code
2019-04-19 12:42 ` Tom Rini
@ 2019-04-19 13:29 ` Marek Vasut
2019-04-19 13:37 ` Marek Vasut
2019-04-19 13:32 ` Michael Nazzareno Trimarchi
1 sibling, 1 reply; 11+ messages in thread
From: Marek Vasut @ 2019-04-19 13:29 UTC (permalink / raw)
To: u-boot
On 4/19/19 2:42 PM, Tom Rini wrote:
> On Fri, Apr 19, 2019 at 11:25:47AM +0200, Marek Vasut wrote:
>> On 4/19/19 8:55 AM, Jagan Teki wrote:
>>> Dropped
>>> - mxs_spi driver
>>> - CONFIG_MXS_SPI
>>>
>>> Dropped due to:
>>> - no active updates
>>> - no dm conversion
>>> - multiple pings for asking dm-conversion
>>
>> This is the first information I received ... sigh.
>
> Sigh, I thought you had seen this before and noted at the time that you
> hadn't heard anything before then.
>
> So, are the mx28 family boards something we still want to support? I
> assume there's going to be other things that need converting there too.
I didn't see much MX28 activity recently myself, except for the thing
Mans was playing with.
--
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] [PATCH v3] spi: Zap mxs_spi driver-related code
2019-04-19 13:29 ` Marek Vasut
@ 2019-04-19 13:37 ` Marek Vasut
0 siblings, 0 replies; 11+ messages in thread
From: Marek Vasut @ 2019-04-19 13:37 UTC (permalink / raw)
To: u-boot
On 4/19/19 3:29 PM, Marek Vasut wrote:
> On 4/19/19 2:42 PM, Tom Rini wrote:
>> On Fri, Apr 19, 2019 at 11:25:47AM +0200, Marek Vasut wrote:
>>> On 4/19/19 8:55 AM, Jagan Teki wrote:
>>>> Dropped
>>>> - mxs_spi driver
>>>> - CONFIG_MXS_SPI
>>>>
>>>> Dropped due to:
>>>> - no active updates
>>>> - no dm conversion
>>>> - multiple pings for asking dm-conversion
>>>
>>> This is the first information I received ... sigh.
>>
>> Sigh, I thought you had seen this before and noted at the time that you
>> hadn't heard anything before then.
>>
>> So, are the mx28 family boards something we still want to support? I
>> assume there's going to be other things that need converting there too.
>
> I didn't see much MX28 activity recently myself, except for the thing
> Mans was playing with.
Oh and regarding the conversion, yes, a lot of MXS stuff will need
conversion.
--
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] [PATCH v3] spi: Zap mxs_spi driver-related code
2019-04-19 12:42 ` Tom Rini
2019-04-19 13:29 ` Marek Vasut
@ 2019-04-19 13:32 ` Michael Nazzareno Trimarchi
2019-04-21 18:41 ` Tom Rini
[not found] ` <yw1x7ebjydcy.fsf@denx.de>
1 sibling, 2 replies; 11+ messages in thread
From: Michael Nazzareno Trimarchi @ 2019-04-19 13:32 UTC (permalink / raw)
To: u-boot
Hi Tom
On Fri, Apr 19, 2019 at 2:42 PM Tom Rini <trini@konsulko.com> wrote:
>
> On Fri, Apr 19, 2019 at 11:25:47AM +0200, Marek Vasut wrote:
> > On 4/19/19 8:55 AM, Jagan Teki wrote:
> > > Dropped
> > > - mxs_spi driver
> > > - CONFIG_MXS_SPI
> > >
> > > Dropped due to:
> > > - no active updates
> > > - no dm conversion
> > > - multiple pings for asking dm-conversion
> >
> > This is the first information I received ... sigh.
>
> Sigh, I thought you had seen this before and noted at the time that you
> hadn't heard anything before then.
>
> So, are the mx28 family boards something we still want to support? I
> assume there's going to be other things that need converting there too.
I have one mx28 long term support. We have added spl support and
booting. Can you please
wait to drop it?
Michael
>
> --
> Tom
>
--
| Michael Nazzareno Trimarchi Amarula Solutions BV |
| COO - Founder Cruquiuskade 47 |
| +31(0)851119172 Amsterdam 1018 AM NL |
| [`as] http://www.amarulasolutions.com |
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] [PATCH v3] spi: Zap mxs_spi driver-related code
2019-04-19 13:32 ` Michael Nazzareno Trimarchi
@ 2019-04-21 18:41 ` Tom Rini
2019-04-21 19:02 ` Marek Vasut
2019-04-24 6:49 ` Jagan Teki
[not found] ` <yw1x7ebjydcy.fsf@denx.de>
1 sibling, 2 replies; 11+ messages in thread
From: Tom Rini @ 2019-04-21 18:41 UTC (permalink / raw)
To: u-boot
On Fri, Apr 19, 2019 at 03:32:55PM +0200, Michael Nazzareno Trimarchi wrote:
> Hi Tom
>
> On Fri, Apr 19, 2019 at 2:42 PM Tom Rini <trini@konsulko.com> wrote:
> >
> > On Fri, Apr 19, 2019 at 11:25:47AM +0200, Marek Vasut wrote:
> > > On 4/19/19 8:55 AM, Jagan Teki wrote:
> > > > Dropped
> > > > - mxs_spi driver
> > > > - CONFIG_MXS_SPI
> > > >
> > > > Dropped due to:
> > > > - no active updates
> > > > - no dm conversion
> > > > - multiple pings for asking dm-conversion
> > >
> > > This is the first information I received ... sigh.
> >
> > Sigh, I thought you had seen this before and noted at the time that you
> > hadn't heard anything before then.
> >
> > So, are the mx28 family boards something we still want to support? I
> > assume there's going to be other things that need converting there too.
>
> I have one mx28 long term support. We have added spl support and
> booting. Can you please
> wait to drop it?
I have no problem with actively maintained platforms regardless of age.
If you're willing to maintain things, that's great. Perhaps have a
conversion with Marek about taking over the mx28 and related stuff,
keeping the relevant-to-you boards functional and up to date? Thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190421/2cf33486/attachment.sig>
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] [PATCH v3] spi: Zap mxs_spi driver-related code
2019-04-21 18:41 ` Tom Rini
@ 2019-04-21 19:02 ` Marek Vasut
2019-04-24 6:49 ` Jagan Teki
1 sibling, 0 replies; 11+ messages in thread
From: Marek Vasut @ 2019-04-21 19:02 UTC (permalink / raw)
To: u-boot
On 4/21/19 8:41 PM, Tom Rini wrote:
> On Fri, Apr 19, 2019 at 03:32:55PM +0200, Michael Nazzareno Trimarchi wrote:
>> Hi Tom
>>
>> On Fri, Apr 19, 2019 at 2:42 PM Tom Rini <trini@konsulko.com> wrote:
>>>
>>> On Fri, Apr 19, 2019 at 11:25:47AM +0200, Marek Vasut wrote:
>>>> On 4/19/19 8:55 AM, Jagan Teki wrote:
>>>>> Dropped
>>>>> - mxs_spi driver
>>>>> - CONFIG_MXS_SPI
>>>>>
>>>>> Dropped due to:
>>>>> - no active updates
>>>>> - no dm conversion
>>>>> - multiple pings for asking dm-conversion
>>>>
>>>> This is the first information I received ... sigh.
>>>
>>> Sigh, I thought you had seen this before and noted at the time that you
>>> hadn't heard anything before then.
>>>
>>> So, are the mx28 family boards something we still want to support? I
>>> assume there's going to be other things that need converting there too.
>>
>> I have one mx28 long term support. We have added spl support and
>> booting. Can you please
>> wait to drop it?
>
> I have no problem with actively maintained platforms regardless of age.
> If you're willing to maintain things, that's great. Perhaps have a
> conversion with Marek about taking over the mx28 and related stuff,
> keeping the relevant-to-you boards functional and up to date? Thanks!
Fine by me.
--
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] [PATCH v3] spi: Zap mxs_spi driver-related code
2019-04-21 18:41 ` Tom Rini
2019-04-21 19:02 ` Marek Vasut
@ 2019-04-24 6:49 ` Jagan Teki
1 sibling, 0 replies; 11+ messages in thread
From: Jagan Teki @ 2019-04-24 6:49 UTC (permalink / raw)
To: u-boot
On Mon, Apr 22, 2019 at 12:11 AM Tom Rini <trini@konsulko.com> wrote:
>
> On Fri, Apr 19, 2019 at 03:32:55PM +0200, Michael Nazzareno Trimarchi wrote:
> > Hi Tom
> >
> > On Fri, Apr 19, 2019 at 2:42 PM Tom Rini <trini@konsulko.com> wrote:
> > >
> > > On Fri, Apr 19, 2019 at 11:25:47AM +0200, Marek Vasut wrote:
> > > > On 4/19/19 8:55 AM, Jagan Teki wrote:
> > > > > Dropped
> > > > > - mxs_spi driver
> > > > > - CONFIG_MXS_SPI
> > > > >
> > > > > Dropped due to:
> > > > > - no active updates
> > > > > - no dm conversion
> > > > > - multiple pings for asking dm-conversion
> > > >
> > > > This is the first information I received ... sigh.
> > >
> > > Sigh, I thought you had seen this before and noted at the time that you
> > > hadn't heard anything before then.
> > >
> > > So, are the mx28 family boards something we still want to support? I
> > > assume there's going to be other things that need converting there too.
> >
> > I have one mx28 long term support. We have added spl support and
> > booting. Can you please
> > wait to drop it?
>
> I have no problem with actively maintained platforms regardless of age.
> If you're willing to maintain things, that's great. Perhaps have a
> conversion with Marek about taking over the mx28 and related stuff,
> keeping the relevant-to-you boards functional and up to date? Thanks!
We (Akash) tried multiple iterations about the dm-conversion and look
like it is failed to conclude. if someone or akash can come up with
next version, it would be good.
[1] https://patchwork.ozlabs.org/patch/1087964/
^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <yw1x7ebjydcy.fsf@denx.de>]
* [U-Boot] [PATCH v3] spi: Zap mxs_spi driver-related code
[not found] ` <yw1x7ebjydcy.fsf@denx.de>
@ 2019-04-24 9:44 ` Michael Nazzareno Trimarchi
2019-04-24 11:50 ` Tom Rini
0 siblings, 1 reply; 11+ messages in thread
From: Michael Nazzareno Trimarchi @ 2019-04-24 9:44 UTC (permalink / raw)
To: u-boot
Hi
On Wed., 24 Apr. 2019, 11:14 am M책ns Rullg책rd, <mans@denx.de> wrote:
> Michael Nazzareno Trimarchi <michael@amarulasolutions.com> writes:
>
> > Hi Tom
> >
> > On Fri, Apr 19, 2019 at 2:42 PM Tom Rini <trini@konsulko.com> wrote:
> >>
> >> On Fri, Apr 19, 2019 at 11:25:47AM +0200, Marek Vasut wrote:
> >> > On 4/19/19 8:55 AM, Jagan Teki wrote:
> >> > > Dropped
> >> > > - mxs_spi driver
> >> > > - CONFIG_MXS_SPI
> >> > >
> >> > > Dropped due to:
> >> > > - no active updates
> >> > > - no dm conversion
> >> > > - multiple pings for asking dm-conversion
> >> >
> >> > This is the first information I received ... sigh.
> >>
> >> Sigh, I thought you had seen this before and noted at the time that you
> >> hadn't heard anything before then.
> >>
> >> So, are the mx28 family boards something we still want to support? I
> >> assume there's going to be other things that need converting there too.
> >
> > I have one mx28 long term support. We have added spl support and
> > booting.
>
> Something other than the SPL support in mainline u-boot?
>
> > Can you please wait to drop it?
>
> As much as I'd like to see the mx28 chip vanish, I think it's too soon
> to be dropping support for it.
>
We have a long term support on some hardware. We will upload our board. No
it's not different but we are interested in it
Michael
> --
> M책ns Rullg책rd
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] [PATCH v3] spi: Zap mxs_spi driver-related code
2019-04-24 9:44 ` Michael Nazzareno Trimarchi
@ 2019-04-24 11:50 ` Tom Rini
0 siblings, 0 replies; 11+ messages in thread
From: Tom Rini @ 2019-04-24 11:50 UTC (permalink / raw)
To: u-boot
On Wed, Apr 24, 2019 at 11:44:24AM +0200, Michael Nazzareno Trimarchi wrote:
> Hi
>
>
>
> On Wed., 24 Apr. 2019, 11:14 am Måns Rullgård, <mans@denx.de> wrote:
>
> > Michael Nazzareno Trimarchi <michael@amarulasolutions.com> writes:
> >
> > > Hi Tom
> > >
> > > On Fri, Apr 19, 2019 at 2:42 PM Tom Rini <trini@konsulko.com> wrote:
> > >>
> > >> On Fri, Apr 19, 2019 at 11:25:47AM +0200, Marek Vasut wrote:
> > >> > On 4/19/19 8:55 AM, Jagan Teki wrote:
> > >> > > Dropped
> > >> > > - mxs_spi driver
> > >> > > - CONFIG_MXS_SPI
> > >> > >
> > >> > > Dropped due to:
> > >> > > - no active updates
> > >> > > - no dm conversion
> > >> > > - multiple pings for asking dm-conversion
> > >> >
> > >> > This is the first information I received ... sigh.
> > >>
> > >> Sigh, I thought you had seen this before and noted at the time that you
> > >> hadn't heard anything before then.
> > >>
> > >> So, are the mx28 family boards something we still want to support? I
> > >> assume there's going to be other things that need converting there too.
> > >
> > > I have one mx28 long term support. We have added spl support and
> > > booting.
> >
> > Something other than the SPL support in mainline u-boot?
> >
> > > Can you please wait to drop it?
> >
> > As much as I'd like to see the mx28 chip vanish, I think it's too soon
> > to be dropping support for it.
> >
>
> We have a long term support on some hardware. We will upload our board. No
> it's not different but we are interested in it
Great! Because we need people willing to maintain the code if we're not
going to drop it. Thanks again!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190424/2c7215ae/attachment.sig>
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2019-04-24 11:50 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-19 6:55 [U-Boot] [PATCH v3] spi: Zap mxs_spi driver-related code Jagan Teki
2019-04-19 9:25 ` Marek Vasut
2019-04-19 12:42 ` Tom Rini
2019-04-19 13:29 ` Marek Vasut
2019-04-19 13:37 ` Marek Vasut
2019-04-19 13:32 ` Michael Nazzareno Trimarchi
2019-04-21 18:41 ` Tom Rini
2019-04-21 19:02 ` Marek Vasut
2019-04-24 6:49 ` Jagan Teki
[not found] ` <yw1x7ebjydcy.fsf@denx.de>
2019-04-24 9:44 ` Michael Nazzareno Trimarchi
2019-04-24 11:50 ` Tom Rini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.