[PATCH] Fix allyesconfig output.

[PATCH] Fix allyesconfig output.

[Yoshinori Sato]

Conflict JCore-SoC and SolutionEngine 7619.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
 arch/sh/boards/Kconfig | 14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)

diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index b9a37057b77a..cee24c308337 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -8,27 +8,19 @@ config SH_ALPHA_BOARD
 	bool
 
 config SH_DEVICE_TREE
-	bool "Board Described by Device Tree"
+	bool
 	select OF
 	select OF_EARLY_FLATTREE
 	select TIMER_OF
 	select COMMON_CLK
 	select GENERIC_CALIBRATE_DELAY
-	help
-	  Select Board Described by Device Tree to build a kernel that
-	  does not hard-code any board-specific knowledge but instead uses
-	  a device tree blob provided by the boot-loader. You must enable
-	  drivers for any hardware you want to use separately. At this
-	  time, only boards based on the open-hardware J-Core processors
-	  have sufficient driver coverage to use this option; do not
-	  select it if you are using original SuperH hardware.
 
 config SH_JCORE_SOC
 	bool "J-Core SoC"
-	depends on SH_DEVICE_TREE && (CPU_SH2 || CPU_J2)
+	select SH_DEVICE_TREE
 	select CLKSRC_JCORE_PIT
 	select JCORE_AIC
-	default y if CPU_J2
+	depends on CPU_J2
 	help
 	  Select this option to include drivers core components of the
 	  J-Core SoC, including interrupt controllers and timers.
-- 
2.11.0

Re: [PATCH] Fix allyesconfig output.

[Randy Dunlap]

On 4/21/19 7:00 AM, Yoshinori Sato wrote:
> Conflict JCore-SoC and SolutionEngine 7619.
> 
> Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>

Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested

Thanks.


> ---
>  arch/sh/boards/Kconfig | 14 +++-----------
>  1 file changed, 3 insertions(+), 11 deletions(-)
> 
> diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
> index b9a37057b77a..cee24c308337 100644
> --- a/arch/sh/boards/Kconfig
> +++ b/arch/sh/boards/Kconfig
> @@ -8,27 +8,19 @@ config SH_ALPHA_BOARD
>  	bool
>  
>  config SH_DEVICE_TREE
> -	bool "Board Described by Device Tree"
> +	bool
>  	select OF
>  	select OF_EARLY_FLATTREE
>  	select TIMER_OF
>  	select COMMON_CLK
>  	select GENERIC_CALIBRATE_DELAY
> -	help
> -	  Select Board Described by Device Tree to build a kernel that
> -	  does not hard-code any board-specific knowledge but instead uses
> -	  a device tree blob provided by the boot-loader. You must enable
> -	  drivers for any hardware you want to use separately. At this
> -	  time, only boards based on the open-hardware J-Core processors
> -	  have sufficient driver coverage to use this option; do not
> -	  select it if you are using original SuperH hardware.
>  
>  config SH_JCORE_SOC
>  	bool "J-Core SoC"
> -	depends on SH_DEVICE_TREE && (CPU_SH2 || CPU_J2)
> +	select SH_DEVICE_TREE
>  	select CLKSRC_JCORE_PIT
>  	select JCORE_AIC
> -	default y if CPU_J2
> +	depends on CPU_J2
>  	help
>  	  Select this option to include drivers core components of the
>  	  J-Core SoC, including interrupt controllers and timers.
> 


-- 
~Randy