From: Shawn Guo <shawnguo@kernel.org>
To: arm@kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>, Stefan Agner <stefan@agner.ch>,
Li Yang <leoyang.li@nxp.com>,
linux-imx@nxp.com, kernel@pengutronix.de,
Fabio Estevam <festevam@gmail.com>,
linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL 4/6] i.MX arm device tree update for 5.2
Date: Mon, 22 Apr 2019 16:28:34 +0800 [thread overview]
Message-ID: <20190422082836.3734-4-shawnguo@kernel.org> (raw)
In-Reply-To: <20190422082836.3734-1-shawnguo@kernel.org>
The following changes since commit 9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:
Linux 5.1-rc1 (2019-03-17 14:22:26 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-5.2
for you to fetch changes up to 2ea5c9b28fab2f34a0ac5d9b3d17216dd35d3162:
ARM: dts: vf610-zii-dev-rev-b: Specify CS as GPIO_ACTIVE_LOW in spi0 (2019-04-22 09:16:15 +0800)
----------------------------------------------------------------
i.MX arm device tree update for 5.2:
- New board support: imx50-kobo-aura, imx53-m53menlo, imx6dl-eckelmann,
imx7d-mba7, imx7d-zii-rpu2, and vf610-zii-spb4.
- Add i2c, mmc and spi aliases for SoC i.MX35, i.MX50 and i.MX6SL.
- Use new 'reset-gpios' property describing CODEC reset pin for board
mx6qdl-zii-rdu2, imx6qdl-gw5903 and imx6qdl-var-dart.
- Specify viewport count for PCIE block on SoC imx7d and imx6qdl.
- Correct 'ipg' clock of SDMA device for i.MX5, i.MX6 and i.MX7 SoCs.
- Rename MMDC memory controller device to be generic and add MMDC
device for imx7ulp SoC.
- Add OCOTP device support for imx7ulp SoC.
- Improve ZII board DTS by switching to SPDX identifier and using generic
device node name.
- A series from Rui Miguel Silva to add various media related devices
for i.MX7 SoC, and enable ov2680 sensor support for imx7s-warp board.
- Random small updates on various board support.
----------------------------------------------------------------
Adam Ford (3):
ARM: dts: imx6qdl: Enable fsl,sec-v4.0-pwrkey
ARM: dts: imx6q-logicpd: Enable Analog audio capture
ARM: dts: imx6q-logicpd: Shutdown LCD regulator during suspend
Alexander Kurz (3):
ARM: dts: i.MX50: Add i2c, mmc and spi aliases
ARM: dts: i.MX6SL: Add i2c and mmc aliases
ARM: dts: i.MX35: Add i2c and mmc aliases
Andrew F. Davis (3):
ARM: dts: mx6qdl-zii-rdu2: Use new CODEC reset pin name
ARM: dts: imx6qdl-gw5903: Use new CODEC reset pin name
ARM: dts: imx6qdl-var-dart: Use new CODEC reset pin name
Andrey Smirnov (16):
ARM: dts: vf610: Add ZII SPB4 board
ARM: dts: vf610-zii-cfu1: Disable NOR flash/SPI controller
ARM: dts: imx7d: Specify viewport count for PCIE block
ARM: dts: imx6qdl: Specify viewport count for PCIE block
ARM: dts: imx6qdl: Specify IMX6QDL_CLK_IPG as "ipg" clock to SDMA
ARM: dts: imx6sx: Specify IMX6SX_CLK_IPG as "ipg" clock to SDMA
ARM: dts: imx7d: Specify IMX7D_CLK_IPG as "ipg" clock to SDMA
ARM: dts: imx6ul: Specify IMX6UL_CLK_IPG as "ipg" clock to SDMA
ARM: dts: imx6sll: Specify IMX6SLL_CLK_IPG as "ipg" clock to SDMA
ARM: dts: imx6sx: Specify IMX6SX_CLK_IPG as "ahb" clock to SDMA
ARM: dts: imx53: Specify IMX5_CLK_IPG as "ahb" clock to SDMA
ARM: dts: imx51: Specify IMX5_CLK_IPG as "ahb" clock to SDMA
ARM: dts: imx50: Specify IMX5_CLK_IPG as "ahb" clock to SDMA
ARM: dts: Add support for ZII i.MX7 RPU2 board
ARM: dts: vf610-zii-dev: Mark i2c0 SCL as GPIO_OPEN_DRAIN
ARM: dts: vf610-zii-dev-rev-b: Specify CS as GPIO_ACTIVE_LOW in spi0
Anson Huang (6):
ARM: dts: imx7ulp: add mmdc support
ARM: dts: imx: make MMDC node name generic
ARM: dts: imx6qdl: Improve mmdc1 node
ARM: dts: imx7ulp: add ocotp support
ARM: dts: imx6sll: add cooling-cells for cpu-freq cooling device
ARM: dts: imx6dl-sabreauto: update opp table for auto part
Bruno Thomsen (4):
ARM: dts: tq imx7 common board support
ARM: dts: tq imx7s board support
ARM: dts: tq imx7d board support
ARM: dts: bugfix tqma7 soft reset issue
Fabio Estevam (5):
ARM: dts: vf610-zii: Disable SNVS RTC
ARM: dts: vf610-zii-ssmb-spu3: Disable watchdog
ARM: dts: vf610-zii: Remove 'max-brightness' property
ARM: dts: imx: Switch Zii dts to SPDX identifier
ARM: dts: imx: Use generic node names for Zii dts
Frieder Schrempf (1):
ARM: dts: ls1021a: Remove unused properties from QSPI node
Jonathan Neuschäfer (2):
ARM: dts: imx50: Add PHY node for usbotg and adjust clocks
ARM: dts: imx50: Add Kobo Aura DTS
Lucas Stach (2):
ARM: dts: imx6: RDU2: add switch watchdog device
ARM: dts: imx6: RDU2: manage backlight from panel
Marco Felsch (1):
ARM: dts: pfla02: prepare storage devices to add paritions
Marek Vasut (2):
ARM: dts: imx53: Rename M53 SoM touchscreen node
ARM: dts: imx53: Add Menlosystems M53 board
Pierre-Jean Texier (1):
ARM: dts: imx7s-warp: PMIC swbst boot-on/always-on
Rui Miguel Silva (5):
ARM: dts: imx7s: add mipi phy power domain
ARM: dts: imx7s: add multiplexer controls
ARM: dts: imx7s: Add video mux, csi and mipi_csi
ARM: dts: imx7s-warp: add csi and mipi_csi node
ARM: dts: imx7s-warp: add ov2680 sensor node
Tim Harvey (2):
ARM: dts: imx: Add TDA19971 HDMI Receiver to GW551x
ARM: dts: imx: Add TDA19971 HDMI Receiver to GW54xx
Uwe Kleine-König (1):
ARM: dts: Add devicetree for Eckelmann ci4x10
Yinbo Zhu (1):
ARM: dts: ls1021a-qds: enable esdhc controller
arch/arm/boot/dts/Makefile | 9 +-
arch/arm/boot/dts/imx35.dtsi | 6 +
arch/arm/boot/dts/imx50-kobo-aura.dts | 258 +++++++
arch/arm/boot/dts/imx50.dtsi | 23 +-
arch/arm/boot/dts/imx51-zii-rdu1.dts | 38 +-
arch/arm/boot/dts/imx51.dtsi | 2 +-
arch/arm/boot/dts/imx53-m53.dtsi | 2 +-
arch/arm/boot/dts/imx53-m53menlo.dts | 311 +++++++++
arch/arm/boot/dts/imx53.dtsi | 2 +-
arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi | 4 +-
arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts | 381 +++++++++++
arch/arm/boot/dts/imx6dl-sabreauto.dts | 15 +
arch/arm/boot/dts/imx6q-gw54xx.dts | 105 +++
arch/arm/boot/dts/imx6q-logicpd.dts | 4 +-
arch/arm/boot/dts/imx6q-zii-rdu2.dts | 38 +-
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 29 +-
arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 138 ++++
arch/arm/boot/dts/imx6qdl-gw5903.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 4 +-
arch/arm/boot/dts/imx6qdl-var-dart.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 50 +-
arch/arm/boot/dts/imx6qdl.dtsi | 18 +-
arch/arm/boot/dts/imx6qp-zii-rdu2.dts | 38 +-
arch/arm/boot/dts/imx6sl.dtsi | 11 +-
arch/arm/boot/dts/imx6sll.dtsi | 3 +-
arch/arm/boot/dts/imx6sx.dtsi | 4 +-
arch/arm/boot/dts/imx6ul.dtsi | 4 +-
arch/arm/boot/dts/imx7-mba7.dtsi | 550 +++++++++++++++
arch/arm/boot/dts/imx7-tqma7.dtsi | 249 +++++++
arch/arm/boot/dts/imx7d-mba7.dts | 119 ++++
arch/arm/boot/dts/imx7d-tqma7.dtsi | 11 +
arch/arm/boot/dts/imx7d-zii-rpu2.dts | 941 ++++++++++++++++++++++++++
arch/arm/boot/dts/imx7d.dtsi | 1 +
arch/arm/boot/dts/imx7s-mba7.dts | 18 +
arch/arm/boot/dts/imx7s-tqma7.dtsi | 11 +
arch/arm/boot/dts/imx7s-warp.dts | 61 ++
arch/arm/boot/dts/imx7s.dtsi | 96 ++-
arch/arm/boot/dts/imx7ulp.dtsi | 12 +
arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts | 1 -
arch/arm/boot/dts/ls1021a-qds.dts | 4 +
arch/arm/boot/dts/ls1021a.dtsi | 1 -
arch/arm/boot/dts/vf610-zii-cfu1.dts | 26 +-
arch/arm/boot/dts/vf610-zii-dev-rev-b.dts | 57 +-
arch/arm/boot/dts/vf610-zii-dev-rev-c.dts | 49 +-
arch/arm/boot/dts/vf610-zii-dev.dtsi | 6 +-
arch/arm/boot/dts/vf610-zii-scu4-aib.dts | 14 +-
arch/arm/boot/dts/vf610-zii-spb4.dts | 359 ++++++++++
arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts | 5 +-
arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts | 17 +-
49 files changed, 3808 insertions(+), 301 deletions(-)
create mode 100644 arch/arm/boot/dts/imx50-kobo-aura.dts
create mode 100644 arch/arm/boot/dts/imx53-m53menlo.dts
create mode 100644 arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
create mode 100644 arch/arm/boot/dts/imx7-mba7.dtsi
create mode 100644 arch/arm/boot/dts/imx7-tqma7.dtsi
create mode 100644 arch/arm/boot/dts/imx7d-mba7.dts
create mode 100644 arch/arm/boot/dts/imx7d-tqma7.dtsi
create mode 100644 arch/arm/boot/dts/imx7d-zii-rpu2.dts
create mode 100644 arch/arm/boot/dts/imx7s-mba7.dts
create mode 100644 arch/arm/boot/dts/imx7s-tqma7.dtsi
create mode 100644 arch/arm/boot/dts/vf610-zii-spb4.dts
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-04-22 8:29 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-22 8:28 [GIT PULL 1/6] i.MX drivers change for 5.2 Shawn Guo
2019-04-22 8:28 ` [GIT PULL 2/6] i.MX SoC update " Shawn Guo
2019-04-29 16:26 ` Olof Johansson
2019-04-22 8:28 ` [GIT PULL 3/6] i.MX DT bindings " Shawn Guo
2019-04-23 2:03 ` Shawn Guo
2019-04-28 19:50 ` Olof Johansson
2019-04-22 8:28 ` Shawn Guo [this message]
2019-04-23 2:08 ` [GIT PULL 4/6] i.MX arm device tree " Shawn Guo
2019-04-28 19:51 ` Olof Johansson
2019-04-22 8:28 ` [GIT PULL 5/6] i.MX arm64 " Shawn Guo
2019-04-29 16:27 ` Olof Johansson
2019-04-22 8:28 ` [GIT PULL 6/6] i.MX defconfig " Shawn Guo
2019-04-29 16:29 ` Olof Johansson
2019-04-30 2:26 ` Shawn Guo
2019-04-30 2:31 ` Fabio Estevam
2019-04-30 21:18 ` Leonard Crestez
2019-05-01 0:41 ` Shawn Guo
2019-05-03 14:12 ` Leonard Crestez
2019-05-04 13:28 ` Shawn Guo
2019-04-29 16:25 ` [GIT PULL 1/6] i.MX drivers change " Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190422082836.3734-4-shawnguo@kernel.org \
--to=shawnguo@kernel.org \
--cc=arm@kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.