All of lore.kernel.org
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: alsa-devel@alsa-project.org
Cc: Mark Brown <broonie@kernel.org>,
	Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Subject: [PATCH 2/2] ASoC: Intel: Add machine driver for CX2072X on BYT/CHT platforms
Date: Tue, 23 Apr 2019 16:13:36 +0200	[thread overview]
Message-ID: <20190423141336.12568-3-tiwai@suse.de> (raw)
In-Reply-To: <20190423141336.12568-1-tiwai@suse.de>

This is an implementation of a machine driver needed for Conexant
CX2072X codec on Intel Baytrail and Cherrytrail platforms.  The
current patch is based on the initial work by Pierre-Louis Bossart and
the other Intel machine drivers.

The jack detection support (driven via the standard GPIO) was added on
top of the original work.

No SOF support yet, so the corresponding entries are commented out.

Tested with ASUS E200HA laptop.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=115531
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/soc/intel/boards/Kconfig                    |  11 +
 sound/soc/intel/boards/Makefile                   |   2 +
 sound/soc/intel/boards/bytcht_cx2072x.c           | 285 ++++++++++++++++++++++
 sound/soc/intel/common/soc-acpi-intel-byt-match.c |   8 +
 sound/soc/intel/common/soc-acpi-intel-cht-match.c |   8 +
 5 files changed, 314 insertions(+)
 create mode 100644 sound/soc/intel/boards/bytcht_cx2072x.c

diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig
index 12d6b73e9531..e8494ef96447 100644
--- a/sound/soc/intel/boards/Kconfig
+++ b/sound/soc/intel/boards/Kconfig
@@ -136,6 +136,17 @@ config SND_SOC_INTEL_CHT_BSW_NAU8824_MACH
 	  Say Y or m if you have such a device. This is a recommended option.
 	  If unsure select "N".
 
+config SND_SOC_INTEL_BYT_CHT_CX2072X_MACH
+	tristate "Baytrail & Cherrytrail with CX2072X codec"
+	depends on X86_INTEL_LPSS && I2C && ACPI
+	select SND_SOC_ACPI
+	select SND_SOC_CX2072X
+	help
+	  This adds support for ASoC machine driver for Intel(R) Baytrail &
+	  Cherrytrail platforms with Conexant CX2072X audio codec.
+	  Say Y or m if you have such a device. This is a recommended option.
+	  If unsure select "N".
+
 config SND_SOC_INTEL_BYT_CHT_DA7213_MACH
 	tristate "Baytrail & Cherrytrail with DA7212/7213 codec"
 	depends on X86_INTEL_LPSS && I2C && ACPI
diff --git a/sound/soc/intel/boards/Makefile b/sound/soc/intel/boards/Makefile
index bf072ea299b7..098ad7998b43 100644
--- a/sound/soc/intel/boards/Makefile
+++ b/sound/soc/intel/boards/Makefile
@@ -13,6 +13,7 @@ snd-soc-sst-cht-bsw-rt5672-objs := cht_bsw_rt5672.o
 snd-soc-sst-cht-bsw-rt5645-objs := cht_bsw_rt5645.o
 snd-soc-sst-cht-bsw-max98090_ti-objs := cht_bsw_max98090_ti.o
 snd-soc-sst-cht-bsw-nau8824-objs := cht_bsw_nau8824.o
+snd-soc-sst-byt-cht-cx2072x-objs := bytcht_cx2072x.o
 snd-soc-sst-byt-cht-da7213-objs := bytcht_da7213.o
 snd-soc-sst-byt-cht-es8316-objs := bytcht_es8316.o
 snd-soc-sst-byt-cht-nocodec-objs := bytcht_nocodec.o
@@ -40,6 +41,7 @@ obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH) += snd-soc-sst-cht-bsw-rt5672.o
 obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH) += snd-soc-sst-cht-bsw-rt5645.o
 obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH) += snd-soc-sst-cht-bsw-max98090_ti.o
 obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_NAU8824_MACH) += snd-soc-sst-cht-bsw-nau8824.o
+obj-$(CONFIG_SND_SOC_INTEL_BYT_CHT_CX2072X_MACH) += snd-soc-sst-byt-cht-cx2072x.o
 obj-$(CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH) += snd-soc-sst-byt-cht-da7213.o
 obj-$(CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH) += snd-soc-sst-byt-cht-es8316.o
 obj-$(CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH) += snd-soc-sst-byt-cht-nocodec.o
diff --git a/sound/soc/intel/boards/bytcht_cx2072x.c b/sound/soc/intel/boards/bytcht_cx2072x.c
new file mode 100644
index 000000000000..697ff679576d
--- /dev/null
+++ b/sound/soc/intel/boards/bytcht_cx2072x.c
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+//  bytcht_cx207x.c - ASoC DPCM Machine driver for Baytrail / CherryTrail
+//                    platforms with CX2072X codec
+//
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <asm/platform_sst_audio.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/jack.h>
+#include <sound/soc.h>
+#include <sound/soc-acpi.h>
+#include "../../codecs/cx2072x.h"
+#include "../atom/sst-atom-controls.h"
+
+static const struct snd_soc_dapm_widget byt_cht_cx2072x_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+	SND_SOC_DAPM_MIC("Int Mic", NULL),
+	SND_SOC_DAPM_SPK("Ext Spk", NULL),
+};
+
+static const struct snd_soc_dapm_route byt_cht_cx2072x_audio_map[] = {
+	/* External Speakers: HFL, HFR */
+	{"Headphone", NULL, "PORTA"},
+	{"Ext Spk", NULL, "PORTG"},
+	{"PORTC", NULL, "Int Mic"},
+	{"PORTD", NULL, "Headset Mic"},
+
+	{"Playback", NULL, "ssp2 Tx"},
+	{"ssp2 Tx", NULL, "codec_out0"},
+	{"ssp2 Tx", NULL, "codec_out1"},
+	{"codec_in0", NULL, "ssp2 Rx"},
+	{"codec_in1", NULL, "ssp2 Rx"},
+	{"ssp2 Rx", NULL, "Capture"},
+	{"ssp0 Tx", NULL, "modem_out"},
+	{"modem_in", NULL, "ssp0 Rx"},
+};
+
+static const struct snd_kcontrol_new byt_cht_cx2072x_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Headphone"),
+	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+	SOC_DAPM_PIN_SWITCH("Int Mic"),
+	SOC_DAPM_PIN_SWITCH("Ext Spk"),
+};
+
+static struct snd_soc_jack byt_cht_cx2072x_headset;
+
+/* Headset jack detection DAPM pins */
+static struct snd_soc_jack_pin byt_cht_cx2072x_headset_pins[] = {
+	{
+		.pin = "Headset Mic",
+		.mask = SND_JACK_MICROPHONE,
+	},
+	{
+		.pin = "Headphone",
+		.mask = SND_JACK_HEADPHONE,
+	},
+};
+
+static const struct acpi_gpio_params byt_cht_cx2072x_headset_gpios;
+static const struct acpi_gpio_mapping byt_cht_cx2072x_acpi_gpios[] = {
+	{ "headset-gpios", &byt_cht_cx2072x_headset_gpios, 1 },
+	{},
+};
+
+static int byt_cht_cx2072x_jack_status_check(void *data)
+{
+	return snd_soc_cx2072x_get_jack_state(data);
+}
+
+static struct snd_soc_jack_gpio byt_cht_cx2072x_gpio = {
+	.name = "headset",
+	.report = SND_JACK_HEADSET | SND_JACK_BTN_0,
+	.debounce_time = 150,
+	.wake = true,
+	.jack_status_check = byt_cht_cx2072x_jack_status_check,
+};
+
+static int byt_cht_cx2072x_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_card *card = rtd->card;
+	struct snd_soc_component *codec = rtd->codec_dai->component;
+	int ret;
+
+	if (devm_acpi_dev_add_driver_gpios(codec->dev,
+					   byt_cht_cx2072x_acpi_gpios))
+		dev_warn(rtd->dev, "Unable to add GPIO mapping table\n");
+
+	card->dapm.idle_bias_off = true;
+
+	/* set the default PLL rate, the clock is handled by the codec driver */
+	ret = snd_soc_dai_set_sysclk(rtd->codec_dai, CX2072X_MCLK_EXTERNAL_PLL,
+				     19200000, SND_SOC_CLOCK_IN);
+	if (ret) {
+		dev_err(rtd->dev, "Could not set sysclk\n");
+		return ret;
+	}
+
+	ret = snd_soc_card_jack_new(card, "Headset",
+				    SND_JACK_HEADSET | SND_JACK_BTN_0,
+				    &byt_cht_cx2072x_headset,
+				    byt_cht_cx2072x_headset_pins,
+				    ARRAY_SIZE(byt_cht_cx2072x_headset_pins));
+	if (ret)
+		return ret;
+
+	byt_cht_cx2072x_gpio.gpiod_dev = codec->dev;
+	byt_cht_cx2072x_gpio.data = codec;
+	ret = snd_soc_jack_add_gpios(&byt_cht_cx2072x_headset, 1,
+				     &byt_cht_cx2072x_gpio);
+	if (ret) {
+		dev_err(rtd->dev, "Adding jack GPIO failed\n");
+		return ret;
+	}
+
+	snd_soc_cx2072x_enable_jack_detect(codec);
+
+	return ret;
+}
+
+static int byt_cht_cx2072x_fixup(struct snd_soc_pcm_runtime *rtd,
+				 struct snd_pcm_hw_params *params)
+{
+	struct snd_interval *rate =
+		hw_param_interval(params, SNDRV_PCM_HW_PARAM_RATE);
+	struct snd_interval *channels =
+		hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS);
+	int ret;
+
+	/* The DSP will covert the FE rate to 48k, stereo, 24bits */
+	rate->min = rate->max = 48000;
+	channels->min = channels->max = 2;
+
+	/* set SSP2 to 24-bit */
+	params_set_format(params, SNDRV_PCM_FORMAT_S24_LE);
+
+	/*
+	 * Default mode for SSP configuration is TDM 4 slot, override config
+	 * with explicit setting to I2S 2ch 24-bit. The word length is set with
+	 * dai_set_tdm_slot() since there is no other API exposed
+	 */
+	ret = snd_soc_dai_set_fmt(rtd->cpu_dai,
+				SND_SOC_DAIFMT_I2S     |
+				SND_SOC_DAIFMT_NB_NF   |
+				SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0) {
+		dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, 24);
+	if (ret < 0) {
+		dev_err(rtd->dev, "can't set I2S config, err %d\n", ret);
+		return ret;
+	}
+
+	snd_soc_dai_set_bclk_ratio(rtd->codec_dai, 50);
+	return 0;
+}
+
+static int byt_cht_cx2072x_aif1_startup(struct snd_pcm_substream *substream)
+{
+	return snd_pcm_hw_constraint_single(substream->runtime,
+					    SNDRV_PCM_HW_PARAM_RATE, 48000);
+}
+
+static struct snd_soc_ops byt_cht_cx2072x_aif1_ops = {
+	.startup = byt_cht_cx2072x_aif1_startup,
+};
+
+static struct snd_soc_dai_link byt_cht_cx2072x_dais[] = {
+	[MERR_DPCM_AUDIO] = {
+		.name = "Audio Port",
+		.stream_name = "Audio",
+		.cpu_dai_name = "media-cpu-dai",
+		.codec_dai_name = "snd-soc-dummy-dai",
+		.codec_name = "snd-soc-dummy",
+		.platform_name = "sst-mfld-platform",
+		.nonatomic = true,
+		.dynamic = 1,
+		.dpcm_playback = 1,
+		.dpcm_capture = 1,
+		.ops = &byt_cht_cx2072x_aif1_ops,
+	},
+	[MERR_DPCM_DEEP_BUFFER] = {
+		.name = "Deep-Buffer Audio Port",
+		.stream_name = "Deep-Buffer Audio",
+		.cpu_dai_name = "deepbuffer-cpu-dai",
+		.codec_dai_name = "snd-soc-dummy-dai",
+		.codec_name = "snd-soc-dummy",
+		.platform_name = "sst-mfld-platform",
+		.nonatomic = true,
+		.dynamic = 1,
+		.dpcm_playback = 1,
+		.ops = &byt_cht_cx2072x_aif1_ops,
+	},
+	/* back ends */
+	{
+		.name = "SSP2-Codec",
+		.id = 1,
+		.cpu_dai_name = "ssp2-port",
+		.platform_name = "sst-mfld-platform",
+		.no_pcm = 1,
+		.codec_dai_name = "cx2072x-hifi",
+		.codec_name = "i2c-14F10720:00",
+		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+					      | SND_SOC_DAIFMT_CBS_CFS,
+		.init = byt_cht_cx2072x_init,
+		.be_hw_params_fixup = byt_cht_cx2072x_fixup,
+		.nonatomic = true,
+		.dpcm_playback = 1,
+		.dpcm_capture = 1,
+	},
+};
+
+/* SoC card */
+static struct snd_soc_card byt_cht_cx2072x_card = {
+	.name = "bytcht-cx2072x",
+	.owner = THIS_MODULE,
+	.dai_link = byt_cht_cx2072x_dais,
+	.num_links = ARRAY_SIZE(byt_cht_cx2072x_dais),
+	.dapm_widgets = byt_cht_cx2072x_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(byt_cht_cx2072x_widgets),
+	.dapm_routes = byt_cht_cx2072x_audio_map,
+	.num_dapm_routes = ARRAY_SIZE(byt_cht_cx2072x_audio_map),
+	.controls = byt_cht_cx2072x_controls,
+	.num_controls = ARRAY_SIZE(byt_cht_cx2072x_controls),
+};
+
+static char codec_name[SND_ACPI_I2C_ID_LEN];
+
+static int snd_byt_cht_cx2072x_probe(struct platform_device *pdev)
+{
+	struct snd_soc_acpi_mach *mach;
+	struct acpi_device *adev;
+	int dai_index = 0;
+	int i, ret;
+
+	byt_cht_cx2072x_card.dev = &pdev->dev;
+	mach = dev_get_platdata(&pdev->dev);
+
+	/* fix index of codec dai */
+	for (i = 0; i < ARRAY_SIZE(byt_cht_cx2072x_dais); i++) {
+		if (!strcmp(byt_cht_cx2072x_dais[i].codec_name,
+			    "i2c-14F10720:00")) {
+			dai_index = i;
+			break;
+		}
+	}
+
+	/* fixup codec name based on HID */
+	adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1);
+	if (adev) {
+		snprintf(codec_name, sizeof(codec_name), "i2c-%s",
+			 acpi_dev_name(adev));
+		put_device(&adev->dev);
+		byt_cht_cx2072x_dais[dai_index].codec_name = codec_name;
+	}
+
+	/* override plaform name, if required */
+	ret = snd_soc_fixup_dai_links_platform_name(&byt_cht_cx2072x_card,
+						    mach->mach_params.platform);
+	if (ret)
+		return ret;
+
+	return devm_snd_soc_register_card(&pdev->dev, &byt_cht_cx2072x_card);
+}
+
+static struct platform_driver snd_byt_cht_cx2072x_driver = {
+	.driver = {
+		.name = "bytcht_cx2072x",
+	},
+	.probe = snd_byt_cht_cx2072x_probe,
+};
+module_platform_driver(snd_byt_cht_cx2072x_driver);
+
+MODULE_DESCRIPTION("ASoC Intel(R) Baytrail/Cherrytrail Machine driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:bytcht_cx2072x");
diff --git a/sound/soc/intel/common/soc-acpi-intel-byt-match.c b/sound/soc/intel/common/soc-acpi-intel-byt-match.c
index fe812a909db4..5387a82c2cf5 100644
--- a/sound/soc/intel/common/soc-acpi-intel-byt-match.c
+++ b/sound/soc/intel/common/soc-acpi-intel-byt-match.c
@@ -211,6 +211,14 @@ struct snd_soc_acpi_mach  snd_soc_acpi_intel_baytrail_machines[] = {
 		.sof_fw_filename = "sof-byt.ri",
 		.sof_tplg_filename = "sof-byt-max98090.tplg",
 	},
+	{
+		.id = "14F10720",
+		.drv_name = "bytcht_cx2072x",
+		.fw_filename = "intel/fw_sst_0f28.bin",
+		.board = "bytcht_cx2072x",
+		/* .sof_fw_filename = "sof-byt.ri", */
+		/* .sof_tplg_filename = "sof-byt-cx2072x.tplg", */
+	},
 #if IS_ENABLED(CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH)
 	/*
 	 * This is always last in the table so that it is selected only when
diff --git a/sound/soc/intel/common/soc-acpi-intel-cht-match.c b/sound/soc/intel/common/soc-acpi-intel-cht-match.c
index deafd87cc764..69ecbb88c171 100644
--- a/sound/soc/intel/common/soc-acpi-intel-cht-match.c
+++ b/sound/soc/intel/common/soc-acpi-intel-cht-match.c
@@ -169,6 +169,14 @@ struct snd_soc_acpi_mach  snd_soc_acpi_intel_cherrytrail_machines[] = {
 		.sof_fw_filename = "sof-cht.ri",
 		.sof_tplg_filename = "sof-cht-rt5651.tplg",
 	},
+	{
+		.id = "14F10720",
+		.drv_name = "bytcht_cx2072x",
+		.fw_filename = "intel/fw_sst_22a8.bin",
+		.board = "bytcht_cx2072x",
+		/* .sof_fw_filename = "sof-cht.ri", */
+		/* .sof_tplg_filename = "sof-cht-cx2072x.tplg", */
+	},
 #if IS_ENABLED(CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH)
 	/*
 	 * This is always last in the table so that it is selected only when
-- 
2.16.4

  parent reply	other threads:[~2019-04-23 14:13 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-23 14:13 [PATCH 0/2] ASoC: CX2072X codec support (revised) Takashi Iwai
2019-04-23 14:13 ` [PATCH 1/2] ASoC: Add support for Conexant CX2072X CODEC Takashi Iwai
2019-04-27 17:59   ` Mark Brown
2019-05-02  7:04     ` Takashi Iwai
2019-05-02  7:52       ` Takashi Iwai
2019-05-03  6:52         ` Mark Brown
     [not found]       ` <20190503064729.GF14916@sirena.org.uk>
2019-05-03  7:18         ` Takashi Iwai
     [not found]           ` <20190506042625.GK14916@sirena.org.uk>
2019-05-06  9:55             ` Takashi Iwai
2019-05-06 14:05               ` Mark Brown
2019-05-06 15:26                 ` Takashi Iwai
2019-05-08  8:10                   ` Mark Brown
2019-05-08  8:16                     ` Takashi Iwai
2019-05-08  8:59                       ` Mark Brown
2019-05-08  9:16                         ` Takashi Iwai
2019-05-08 10:10                           ` Mark Brown
2019-05-03  8:05         ` Takashi Iwai
2019-04-23 14:13 ` Takashi Iwai [this message]
2019-04-23 19:20   ` [PATCH 2/2] ASoC: Intel: Add machine driver for CX2072X on BYT/CHT platforms Pierre-Louis Bossart
2019-04-23 19:39     ` Takashi Iwai
2019-04-24 13:08       ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190423141336.12568-3-tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=pierre-louis.bossart@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.