* [GIT PULL] STM32 DT changes for v5.2 #1
@ 2019-04-11 13:56 Alexandre Torgue
2019-04-28 19:28 ` Olof Johansson
0 siblings, 1 reply; 2+ messages in thread
From: Alexandre Torgue @ 2019-04-11 13:56 UTC (permalink / raw)
To: Arnd Bergmann, Olof Johansson, Kevin Hilman, arm-soc, linux-arm-kernel
Cc: Alexandre TORGUE, Maxime Coquelin
Hi Arnd, Olof and Kevin,
Please consider this first round of STM32 DT updates for v5.2.
As you'll see in highlights, main changes are for the MPU STM32MP157.
Thanks.
Alex
The following changes since commit 9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:
Linux 5.1-rc1 (2019-03-17 14:22:26 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git
tags/stm32-dt-for-v5.2-1
for you to fetch changes up to 3fca6a1ab935e69df40dd67e3425627243685b7f:
ARM: dts: stm32: enable cec on stm32mp157a-dk1 board (2019-04-11
11:22:07 +0200)
----------------------------------------------------------------
STM32 DT updates for v5.2, round 1
Highlights:
----------
MPU part:
-Add initial support of stm32mp157a-dk1 board:
This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios)
and 512MB of DDR3. Several connections are available on this boards:
4*USB2.0, 1*USB2.0 typeC, SDcard, RJ45, HDMI, Arduino connector, ...
-Add initial support of stm32mp157c-dk2 board:
This board is a "super-set" of stm32mp157a-dk1. It embeds a
STM32MP157c SOC
with AC package (TFBGA361, 148 ios) and 512MB of DDR3. Same connections
than stm32mp157a-dk1 board are available. Display panel (otm8009a) and
Murata wifi/BT combo is added.
-Add and enable SD card support (MMCI variant) on stm32mp157c-ed1/ev1 and
on stm32mp157a-dk1/dk2 boards.
-Add and enable PMIC support (STPMIC1 chip) on stm32mp157c-ed1/ev1 and
on stm32mp157a-dk1/dk2 boards.
-Add and enable IPCC mailbox support on stm32mp157c-ed1/ev1 and
on stm32mp157a-dk1/dk2 boards.
-Add sysconfig clock support on stm32mp157c.
-Add romem and temperature calibration support on stm32mp157c.
-Add SPDIFRX support on stm32mp157c.
-Enable CEC on stm32mp157a-dk1/dk2.
MCU part:
-Add and enable SD card support (MMCI variant) on stm32h743 eval and disco
boards.
-Add romem and temperature calibration support on stm32f429
(and so stm32f469).
-Enable stm32f769 clock driver
----------------------------------------------------------------
Alexandre Torgue (2):
ARM: dts: stm32: add initial support of stm32mp157a-dk1 board
ARM: dts: stm32: add initial support of stm32mp157c-dk2 board
Fabien Dessenne (3):
ARM: dts: stm32: add IPCC mailbox support on STM32MP157c
ARM: dts: stm32: enable IPCC mailbox support on STM32MP157c-ed1
ARM: dts: stm32: enable IPCC mailbox support on STM32MP157a-dk1
Fabrice Gasnier (3):
ARM: dts: stm32: Add clock on stm32mp157c syscfg
ARM: dts: stm32: Add romem and temperature calibration on stm32mp157c
ARM: dts: stm32: Add romem and temperature calibration on stm32f429
Gabriel Fernandez (1):
ARM: dts: stm32: Enable STM32F769 clock driver
Ludovic Barre (6):
ARM: dts: stm32: add sdmmc1 support on stm32h743
ARM: dts: stm32: add sdmmc1 support on stm32h743i eval board
ARM: dts: stm32: add sdmmc1 support on stm32h743i disco board
ARM: dts: stm32: add sdmmc1 support on stm32mp157c
ARM: dts: stm32: add sdmmc1 support on stm32mp157c ed1 board
ARM: dts: stm32: add sdmmc1 support on stm32mp157a dk1 board
Olivier Moysan (2):
ARM: dts: stm32: add spdifrx support on stm32mp157c
ARM: dts: stm32: add spdfirx pins to stm32mp157c
Pascal Paillet (2):
ARM: dts: stm32: add stpmic1 support on stm32mp157c ed1 board
ARM: dts: stm32: add stpmic1 support on stm32mp157a dk1 board
Yannick Fertré (5):
ARM: dts: stm32: add power supply of otm8009a on stm32mp157c-dk2
ARM: dts: stm32: add I2C sleep pins muxing on stm32mp157
ARM: dts: stm32: add ltdc pins muxing on stm32mp157
ARM: dts: stm32: add cec pins muxing on stm32mp157
ARM: dts: stm32: enable cec on stm32mp157a-dk1 board
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/stm32f429.dtsi | 13 ++
arch/arm/boot/dts/stm32f769-disco.dts | 4 +
arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 68 ++++++++
arch/arm/boot/dts/stm32h743.dtsi | 14 ++
arch/arm/boot/dts/stm32h743i-disco.dts | 20 +++
arch/arm/boot/dts/stm32h743i-eval.dts | 23 ++-
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 269
++++++++++++++++++++++++++++++
arch/arm/boot/dts/stm32mp157a-dk1.dts | 250
+++++++++++++++++++++++++++
arch/arm/boot/dts/stm32mp157c-dk2.dts | 76 +++++++++
arch/arm/boot/dts/stm32mp157c-ed1.dts | 175 ++++++++++++++++++-
arch/arm/boot/dts/stm32mp157c.dtsi | 56 +++++++
12 files changed, 964 insertions(+), 6 deletions(-)
create mode 100644 arch/arm/boot/dts/stm32mp157a-dk1.dts
create mode 100644 arch/arm/boot/dts/stm32mp157c-dk2.dts
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [GIT PULL] STM32 DT changes for v5.2 #1
2019-04-11 13:56 [GIT PULL] STM32 DT changes for v5.2 #1 Alexandre Torgue
@ 2019-04-28 19:28 ` Olof Johansson
0 siblings, 0 replies; 2+ messages in thread
From: Olof Johansson @ 2019-04-28 19:28 UTC (permalink / raw)
To: Alexandre Torgue
Cc: Maxime Coquelin, Kevin Hilman, arm-soc, linux-arm-kernel, Arnd Bergmann
On Thu, Apr 11, 2019 at 03:56:30PM +0200, Alexandre Torgue wrote:
> Hi Arnd, Olof and Kevin,
>
> Please consider this first round of STM32 DT updates for v5.2.
> As you'll see in highlights, main changes are for the MPU STM32MP157.
>
> Thanks.
> Alex
>
>
> The following changes since commit 9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:
>
> Linux 5.1-rc1 (2019-03-17 14:22:26 -0700)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git
> tags/stm32-dt-for-v5.2-1
>
> for you to fetch changes up to 3fca6a1ab935e69df40dd67e3425627243685b7f:
>
> ARM: dts: stm32: enable cec on stm32mp157a-dk1 board (2019-04-11 11:22:07
> +0200)
>
> ----------------------------------------------------------------
> STM32 DT updates for v5.2, round 1
>
> Highlights:
> ----------
>
> MPU part:
> -Add initial support of stm32mp157a-dk1 board:
> This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios)
> and 512MB of DDR3. Several connections are available on this boards:
> 4*USB2.0, 1*USB2.0 typeC, SDcard, RJ45, HDMI, Arduino connector, ...
>
> -Add initial support of stm32mp157c-dk2 board:
> This board is a "super-set" of stm32mp157a-dk1. It embeds a STM32MP157c
> SOC
> with AC package (TFBGA361, 148 ios) and 512MB of DDR3. Same connections
> than stm32mp157a-dk1 board are available. Display panel (otm8009a) and
> Murata wifi/BT combo is added.
>
> -Add and enable SD card support (MMCI variant) on stm32mp157c-ed1/ev1 and
> on stm32mp157a-dk1/dk2 boards.
>
> -Add and enable PMIC support (STPMIC1 chip) on stm32mp157c-ed1/ev1 and
> on stm32mp157a-dk1/dk2 boards.
>
> -Add and enable IPCC mailbox support on stm32mp157c-ed1/ev1 and
> on stm32mp157a-dk1/dk2 boards.
>
> -Add sysconfig clock support on stm32mp157c.
> -Add romem and temperature calibration support on stm32mp157c.
> -Add SPDIFRX support on stm32mp157c.
> -Enable CEC on stm32mp157a-dk1/dk2.
>
> MCU part:
> -Add and enable SD card support (MMCI variant) on stm32h743 eval and disco
> boards.
> -Add romem and temperature calibration support on stm32f429
> (and so stm32f469).
> -Enable stm32f769 clock driver
Merged, thanks!
-Olof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-04-28 20:21 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-11 13:56 [GIT PULL] STM32 DT changes for v5.2 #1 Alexandre Torgue
2019-04-28 19:28 ` Olof Johansson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.