* [PATCH] ASoC: Intel: Make boards more available for compile test
@ 2019-04-10 16:38 Mark Brown
2019-04-10 18:05 ` Pierre-Louis Bossart
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Mark Brown @ 2019-04-10 16:38 UTC (permalink / raw)
To: Pierre-Louis Bossart, Liam Girdwood, Jie Yang; +Cc: alsa-devel, Mark Brown
The Intel boards have very strict dependencies which make them less
available for compile test than is desirable, with requirements for
specific drivers that are only needed at runtime but not at build time.
Relax this a bit if COMPILE_TEST is enabled to improve build coverage
for these drivers.
Signed-off-by: Mark Brown <broonie@kernel.org>
---
sound/soc/intel/boards/Kconfig | 79 +++++++++++++++++++++++-----------
1 file changed, 54 insertions(+), 25 deletions(-)
diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig
index 12d6b73e9531..07b1a02934f1 100644
--- a/sound/soc/intel/boards/Kconfig
+++ b/sound/soc/intel/boards/Kconfig
@@ -16,7 +16,9 @@ if SND_SOC_INTEL_HASWELL
config SND_SOC_INTEL_HASWELL_MACH
tristate "Haswell Lynxpoint"
- depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM
+ depends on I2C
+ depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_RT5640
help
This adds support for the Lynxpoint Audio DSP on Intel(R) Haswell
@@ -26,7 +28,10 @@ config SND_SOC_INTEL_HASWELL_MACH
config SND_SOC_INTEL_BDW_RT5677_MACH
tristate "Broadwell with RT5677 codec"
- depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM && GPIOLIB
+ depends on I2C
+ depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST
+ depends on GPIOLIB || COMPILE_TEST
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_RT5677
help
This adds support for Intel Broadwell platform based boards with
@@ -36,7 +41,9 @@ config SND_SOC_INTEL_BDW_RT5677_MACH
config SND_SOC_INTEL_BROADWELL_MACH
tristate "Broadwell Wildcatpoint"
- depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM
+ depends on I2C
+ depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_RT286
help
This adds support for the Wilcatpoint Audio DSP on Intel(R) Broadwell
@@ -49,7 +56,8 @@ if SND_SOC_INTEL_BAYTRAIL
config SND_SOC_INTEL_BYT_MAX98090_MACH
tristate "Baytrail with MAX98090 codec"
- depends on X86_INTEL_LPSS && I2C
+ depends on I2C
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_MAX98090
help
This adds audio driver for Intel Baytrail platform based boards
@@ -59,7 +67,8 @@ config SND_SOC_INTEL_BYT_MAX98090_MACH
config SND_SOC_INTEL_BYT_RT5640_MACH
tristate "Baytrail with RT5640 codec"
- depends on X86_INTEL_LPSS && I2C
+ depends on I2C
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_RT5640
help
This adds audio driver for Intel Baytrail platform based boards
@@ -72,7 +81,8 @@ if SND_SST_ATOM_HIFI2_PLATFORM
config SND_SOC_INTEL_BYTCR_RT5640_MACH
tristate "Baytrail and Baytrail-CR with RT5640 codec"
- depends on X86_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_ACPI
select SND_SOC_RT5640
help
@@ -83,7 +93,8 @@ config SND_SOC_INTEL_BYTCR_RT5640_MACH
config SND_SOC_INTEL_BYTCR_RT5651_MACH
tristate "Baytrail and Baytrail-CR with RT5651 codec"
- depends on X86_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_ACPI
select SND_SOC_RT5651
help
@@ -94,7 +105,8 @@ config SND_SOC_INTEL_BYTCR_RT5651_MACH
config SND_SOC_INTEL_CHT_BSW_RT5672_MACH
tristate "Cherrytrail & Braswell with RT5672 codec"
- depends on X86_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_ACPI
select SND_SOC_RT5670
help
@@ -105,7 +117,8 @@ config SND_SOC_INTEL_CHT_BSW_RT5672_MACH
config SND_SOC_INTEL_CHT_BSW_RT5645_MACH
tristate "Cherrytrail & Braswell with RT5645/5650 codec"
- depends on X86_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_ACPI
select SND_SOC_RT5645
help
@@ -116,7 +129,8 @@ config SND_SOC_INTEL_CHT_BSW_RT5645_MACH
config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH
tristate "Cherrytrail & Braswell with MAX98090 & TI codec"
- depends on X86_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_MAX98090
select SND_SOC_TS3A227E
help
@@ -127,7 +141,8 @@ config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH
config SND_SOC_INTEL_CHT_BSW_NAU8824_MACH
tristate "Cherrytrail & Braswell with NAU88L24 codec"
- depends on X86_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_ACPI
select SND_SOC_NAU8824
help
@@ -138,7 +153,8 @@ config SND_SOC_INTEL_CHT_BSW_NAU8824_MACH
config SND_SOC_INTEL_BYT_CHT_DA7213_MACH
tristate "Baytrail & Cherrytrail with DA7212/7213 codec"
- depends on X86_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_ACPI
select SND_SOC_DA7213
help
@@ -149,7 +165,8 @@ config SND_SOC_INTEL_BYT_CHT_DA7213_MACH
config SND_SOC_INTEL_BYT_CHT_ES8316_MACH
tristate "Baytrail & Cherrytrail with ES8316 codec"
- depends on X86_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_ACPI
select SND_SOC_ES8316
help
@@ -160,7 +177,8 @@ config SND_SOC_INTEL_BYT_CHT_ES8316_MACH
config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH
tristate "Baytrail & Cherrytrail platform with no codec (MinnowBoard MAX, Up)"
- depends on X86_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on X86_INTEL_LPSS || COMPILE_TEST
help
This adds support for ASoC machine driver for the MinnowBoard Max or
Up boards and provides access to I2S signals on the Low-Speed
@@ -176,7 +194,8 @@ if SND_SOC_INTEL_SKL
config SND_SOC_INTEL_SKL_RT286_MACH
tristate "SKL with RT286 I2S mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
select SND_SOC_RT286
select SND_SOC_DMIC
select SND_SOC_HDAC_HDMI
@@ -188,7 +207,8 @@ config SND_SOC_INTEL_SKL_RT286_MACH
config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH
tristate "SKL with NAU88L25 and SSM4567 in I2S Mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
select SND_SOC_NAU8825
select SND_SOC_SSM4567
select SND_SOC_DMIC
@@ -201,7 +221,8 @@ config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH
config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH
tristate "SKL with NAU88L25 and MAX98357A in I2S Mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
select SND_SOC_NAU8825
select SND_SOC_MAX98357A
select SND_SOC_DMIC
@@ -218,7 +239,8 @@ if SND_SOC_INTEL_APL
config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH
tristate "Broxton with DA7219 and MAX98357A in I2S Mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
select SND_SOC_DA7219
select SND_SOC_MAX98357A
select SND_SOC_DMIC
@@ -232,7 +254,8 @@ config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH
config SND_SOC_INTEL_BXT_RT298_MACH
tristate "Broxton with RT298 I2S mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
select SND_SOC_RT298
select SND_SOC_DMIC
select SND_SOC_HDAC_HDMI
@@ -249,7 +272,8 @@ if SND_SOC_INTEL_KBL
config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH
tristate "KBL with RT5663 and MAX98927 in I2S Mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
select SND_SOC_RT5663
select SND_SOC_MAX98927
select SND_SOC_DMIC
@@ -263,7 +287,8 @@ config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH
config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH
tristate "KBL with RT5663, RT5514 and MAX98927 in I2S Mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
depends on SPI
select SND_SOC_RT5663
select SND_SOC_RT5514
@@ -278,7 +303,8 @@ config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH
config SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH
tristate "KBL with DA7219 and MAX98357A in I2S Mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
select SND_SOC_DA7219
select SND_SOC_MAX98357A
select SND_SOC_DMIC
@@ -290,7 +316,8 @@ config SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH
config SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH
tristate "KBL with DA7219 and MAX98927 in I2S Mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
select SND_SOC_DA7219
select SND_SOC_MAX98927
select SND_SOC_MAX98373
@@ -304,7 +331,8 @@ config SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH
config SND_SOC_INTEL_KBL_RT5660_MACH
tristate "KBL with RT5660 in I2S Mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
select SND_SOC_RT5660
select SND_SOC_HDAC_HDMI
help
@@ -318,7 +346,8 @@ if SND_SOC_INTEL_GLK
config SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH
tristate "GLK with RT5682 and MAX98357A in I2S Mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
select SND_SOC_RT5682
select SND_SOC_MAX98357A
select SND_SOC_DMIC
--
2.20.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] ASoC: Intel: Make boards more available for compile test
2019-04-10 16:38 [PATCH] ASoC: Intel: Make boards more available for compile test Mark Brown
@ 2019-04-10 18:05 ` Pierre-Louis Bossart
2019-04-11 11:01 ` Mark Brown
2019-04-11 11:19 ` Applied "ASoC: Intel: Make boards more available for compile test" to the asoc tree Mark Brown
2019-05-02 2:18 ` Mark Brown
2 siblings, 1 reply; 5+ messages in thread
From: Pierre-Louis Bossart @ 2019-04-10 18:05 UTC (permalink / raw)
To: Mark Brown, Liam Girdwood, Jie Yang; +Cc: alsa-devel
On 4/10/19 11:38 AM, Mark Brown wrote:
> The Intel boards have very strict dependencies which make them less
> available for compile test than is desirable, with requirements for
> specific drivers that are only needed at runtime but not at build time.
> Relax this a bit if COMPILE_TEST is enabled to improve build coverage
> for these drivers.
>
> Signed-off-by: Mark Brown <broonie@kernel.org>
It's really asking for trouble but it's the right thing to do. Let's see
how many issues get reported...
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
> ---
> sound/soc/intel/boards/Kconfig | 79 +++++++++++++++++++++++-----------
> 1 file changed, 54 insertions(+), 25 deletions(-)
>
> diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig
> index 12d6b73e9531..07b1a02934f1 100644
> --- a/sound/soc/intel/boards/Kconfig
> +++ b/sound/soc/intel/boards/Kconfig
> @@ -16,7 +16,9 @@ if SND_SOC_INTEL_HASWELL
>
> config SND_SOC_INTEL_HASWELL_MACH
> tristate "Haswell Lynxpoint"
> - depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM
> + depends on I2C
> + depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST
> + depends on X86_INTEL_LPSS || COMPILE_TEST
> select SND_SOC_RT5640
> help
> This adds support for the Lynxpoint Audio DSP on Intel(R) Haswell
> @@ -26,7 +28,10 @@ config SND_SOC_INTEL_HASWELL_MACH
>
> config SND_SOC_INTEL_BDW_RT5677_MACH
> tristate "Broadwell with RT5677 codec"
> - depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM && GPIOLIB
> + depends on I2C
> + depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST
> + depends on GPIOLIB || COMPILE_TEST
> + depends on X86_INTEL_LPSS || COMPILE_TEST
> select SND_SOC_RT5677
> help
> This adds support for Intel Broadwell platform based boards with
> @@ -36,7 +41,9 @@ config SND_SOC_INTEL_BDW_RT5677_MACH
>
> config SND_SOC_INTEL_BROADWELL_MACH
> tristate "Broadwell Wildcatpoint"
> - depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM
> + depends on I2C
> + depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST
> + depends on X86_INTEL_LPSS || COMPILE_TEST
> select SND_SOC_RT286
> help
> This adds support for the Wilcatpoint Audio DSP on Intel(R) Broadwell
> @@ -49,7 +56,8 @@ if SND_SOC_INTEL_BAYTRAIL
>
> config SND_SOC_INTEL_BYT_MAX98090_MACH
> tristate "Baytrail with MAX98090 codec"
> - depends on X86_INTEL_LPSS && I2C
> + depends on I2C
> + depends on X86_INTEL_LPSS || COMPILE_TEST
> select SND_SOC_MAX98090
> help
> This adds audio driver for Intel Baytrail platform based boards
> @@ -59,7 +67,8 @@ config SND_SOC_INTEL_BYT_MAX98090_MACH
>
> config SND_SOC_INTEL_BYT_RT5640_MACH
> tristate "Baytrail with RT5640 codec"
> - depends on X86_INTEL_LPSS && I2C
> + depends on I2C
> + depends on X86_INTEL_LPSS || COMPILE_TEST
> select SND_SOC_RT5640
> help
> This adds audio driver for Intel Baytrail platform based boards
> @@ -72,7 +81,8 @@ if SND_SST_ATOM_HIFI2_PLATFORM
>
> config SND_SOC_INTEL_BYTCR_RT5640_MACH
> tristate "Baytrail and Baytrail-CR with RT5640 codec"
> - depends on X86_INTEL_LPSS && I2C && ACPI
> + depends on I2C && ACPI
> + depends on X86_INTEL_LPSS || COMPILE_TEST
> select SND_SOC_ACPI
> select SND_SOC_RT5640
> help
> @@ -83,7 +93,8 @@ config SND_SOC_INTEL_BYTCR_RT5640_MACH
>
> config SND_SOC_INTEL_BYTCR_RT5651_MACH
> tristate "Baytrail and Baytrail-CR with RT5651 codec"
> - depends on X86_INTEL_LPSS && I2C && ACPI
> + depends on I2C && ACPI
> + depends on X86_INTEL_LPSS || COMPILE_TEST
> select SND_SOC_ACPI
> select SND_SOC_RT5651
> help
> @@ -94,7 +105,8 @@ config SND_SOC_INTEL_BYTCR_RT5651_MACH
>
> config SND_SOC_INTEL_CHT_BSW_RT5672_MACH
> tristate "Cherrytrail & Braswell with RT5672 codec"
> - depends on X86_INTEL_LPSS && I2C && ACPI
> + depends on I2C && ACPI
> + depends on X86_INTEL_LPSS || COMPILE_TEST
> select SND_SOC_ACPI
> select SND_SOC_RT5670
> help
> @@ -105,7 +117,8 @@ config SND_SOC_INTEL_CHT_BSW_RT5672_MACH
>
> config SND_SOC_INTEL_CHT_BSW_RT5645_MACH
> tristate "Cherrytrail & Braswell with RT5645/5650 codec"
> - depends on X86_INTEL_LPSS && I2C && ACPI
> + depends on I2C && ACPI
> + depends on X86_INTEL_LPSS || COMPILE_TEST
> select SND_SOC_ACPI
> select SND_SOC_RT5645
> help
> @@ -116,7 +129,8 @@ config SND_SOC_INTEL_CHT_BSW_RT5645_MACH
>
> config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH
> tristate "Cherrytrail & Braswell with MAX98090 & TI codec"
> - depends on X86_INTEL_LPSS && I2C && ACPI
> + depends on I2C && ACPI
> + depends on X86_INTEL_LPSS || COMPILE_TEST
> select SND_SOC_MAX98090
> select SND_SOC_TS3A227E
> help
> @@ -127,7 +141,8 @@ config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH
>
> config SND_SOC_INTEL_CHT_BSW_NAU8824_MACH
> tristate "Cherrytrail & Braswell with NAU88L24 codec"
> - depends on X86_INTEL_LPSS && I2C && ACPI
> + depends on I2C && ACPI
> + depends on X86_INTEL_LPSS || COMPILE_TEST
> select SND_SOC_ACPI
> select SND_SOC_NAU8824
> help
> @@ -138,7 +153,8 @@ config SND_SOC_INTEL_CHT_BSW_NAU8824_MACH
>
> config SND_SOC_INTEL_BYT_CHT_DA7213_MACH
> tristate "Baytrail & Cherrytrail with DA7212/7213 codec"
> - depends on X86_INTEL_LPSS && I2C && ACPI
> + depends on I2C && ACPI
> + depends on X86_INTEL_LPSS || COMPILE_TEST
> select SND_SOC_ACPI
> select SND_SOC_DA7213
> help
> @@ -149,7 +165,8 @@ config SND_SOC_INTEL_BYT_CHT_DA7213_MACH
>
> config SND_SOC_INTEL_BYT_CHT_ES8316_MACH
> tristate "Baytrail & Cherrytrail with ES8316 codec"
> - depends on X86_INTEL_LPSS && I2C && ACPI
> + depends on I2C && ACPI
> + depends on X86_INTEL_LPSS || COMPILE_TEST
> select SND_SOC_ACPI
> select SND_SOC_ES8316
> help
> @@ -160,7 +177,8 @@ config SND_SOC_INTEL_BYT_CHT_ES8316_MACH
>
> config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH
> tristate "Baytrail & Cherrytrail platform with no codec (MinnowBoard MAX, Up)"
> - depends on X86_INTEL_LPSS && I2C && ACPI
> + depends on I2C && ACPI
> + depends on X86_INTEL_LPSS || COMPILE_TEST
> help
> This adds support for ASoC machine driver for the MinnowBoard Max or
> Up boards and provides access to I2S signals on the Low-Speed
> @@ -176,7 +194,8 @@ if SND_SOC_INTEL_SKL
>
> config SND_SOC_INTEL_SKL_RT286_MACH
> tristate "SKL with RT286 I2S mode"
> - depends on MFD_INTEL_LPSS && I2C && ACPI
> + depends on I2C && ACPI
> + depends on MFD_INTEL_LPSS || COMPILE_TEST
> select SND_SOC_RT286
> select SND_SOC_DMIC
> select SND_SOC_HDAC_HDMI
> @@ -188,7 +207,8 @@ config SND_SOC_INTEL_SKL_RT286_MACH
>
> config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH
> tristate "SKL with NAU88L25 and SSM4567 in I2S Mode"
> - depends on MFD_INTEL_LPSS && I2C && ACPI
> + depends on I2C && ACPI
> + depends on MFD_INTEL_LPSS || COMPILE_TEST
> select SND_SOC_NAU8825
> select SND_SOC_SSM4567
> select SND_SOC_DMIC
> @@ -201,7 +221,8 @@ config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH
>
> config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH
> tristate "SKL with NAU88L25 and MAX98357A in I2S Mode"
> - depends on MFD_INTEL_LPSS && I2C && ACPI
> + depends on I2C && ACPI
> + depends on MFD_INTEL_LPSS || COMPILE_TEST
> select SND_SOC_NAU8825
> select SND_SOC_MAX98357A
> select SND_SOC_DMIC
> @@ -218,7 +239,8 @@ if SND_SOC_INTEL_APL
>
> config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH
> tristate "Broxton with DA7219 and MAX98357A in I2S Mode"
> - depends on MFD_INTEL_LPSS && I2C && ACPI
> + depends on I2C && ACPI
> + depends on MFD_INTEL_LPSS || COMPILE_TEST
> select SND_SOC_DA7219
> select SND_SOC_MAX98357A
> select SND_SOC_DMIC
> @@ -232,7 +254,8 @@ config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH
>
> config SND_SOC_INTEL_BXT_RT298_MACH
> tristate "Broxton with RT298 I2S mode"
> - depends on MFD_INTEL_LPSS && I2C && ACPI
> + depends on I2C && ACPI
> + depends on MFD_INTEL_LPSS || COMPILE_TEST
> select SND_SOC_RT298
> select SND_SOC_DMIC
> select SND_SOC_HDAC_HDMI
> @@ -249,7 +272,8 @@ if SND_SOC_INTEL_KBL
>
> config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH
> tristate "KBL with RT5663 and MAX98927 in I2S Mode"
> - depends on MFD_INTEL_LPSS && I2C && ACPI
> + depends on I2C && ACPI
> + depends on MFD_INTEL_LPSS || COMPILE_TEST
> select SND_SOC_RT5663
> select SND_SOC_MAX98927
> select SND_SOC_DMIC
> @@ -263,7 +287,8 @@ config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH
>
> config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH
> tristate "KBL with RT5663, RT5514 and MAX98927 in I2S Mode"
> - depends on MFD_INTEL_LPSS && I2C && ACPI
> + depends on I2C && ACPI
> + depends on MFD_INTEL_LPSS || COMPILE_TEST
> depends on SPI
> select SND_SOC_RT5663
> select SND_SOC_RT5514
> @@ -278,7 +303,8 @@ config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH
>
> config SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH
> tristate "KBL with DA7219 and MAX98357A in I2S Mode"
> - depends on MFD_INTEL_LPSS && I2C && ACPI
> + depends on I2C && ACPI
> + depends on MFD_INTEL_LPSS || COMPILE_TEST
> select SND_SOC_DA7219
> select SND_SOC_MAX98357A
> select SND_SOC_DMIC
> @@ -290,7 +316,8 @@ config SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH
>
> config SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH
> tristate "KBL with DA7219 and MAX98927 in I2S Mode"
> - depends on MFD_INTEL_LPSS && I2C && ACPI
> + depends on I2C && ACPI
> + depends on MFD_INTEL_LPSS || COMPILE_TEST
> select SND_SOC_DA7219
> select SND_SOC_MAX98927
> select SND_SOC_MAX98373
> @@ -304,7 +331,8 @@ config SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH
>
> config SND_SOC_INTEL_KBL_RT5660_MACH
> tristate "KBL with RT5660 in I2S Mode"
> - depends on MFD_INTEL_LPSS && I2C && ACPI
> + depends on I2C && ACPI
> + depends on MFD_INTEL_LPSS || COMPILE_TEST
> select SND_SOC_RT5660
> select SND_SOC_HDAC_HDMI
> help
> @@ -318,7 +346,8 @@ if SND_SOC_INTEL_GLK
>
> config SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH
> tristate "GLK with RT5682 and MAX98357A in I2S Mode"
> - depends on MFD_INTEL_LPSS && I2C && ACPI
> + depends on I2C && ACPI
> + depends on MFD_INTEL_LPSS || COMPILE_TEST
> select SND_SOC_RT5682
> select SND_SOC_MAX98357A
> select SND_SOC_DMIC
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] ASoC: Intel: Make boards more available for compile test
2019-04-10 18:05 ` Pierre-Louis Bossart
@ 2019-04-11 11:01 ` Mark Brown
0 siblings, 0 replies; 5+ messages in thread
From: Mark Brown @ 2019-04-11 11:01 UTC (permalink / raw)
To: Pierre-Louis Bossart; +Cc: Liam Girdwood, alsa-devel, Jie Yang
[-- Attachment #1.1: Type: text/plain, Size: 662 bytes --]
On Wed, Apr 10, 2019 at 01:05:40PM -0500, Pierre-Louis Bossart wrote:
> On 4/10/19 11:38 AM, Mark Brown wrote:
> > The Intel boards have very strict dependencies which make them less
> > available for compile test than is desirable, with requirements for
> > specific drivers that are only needed at runtime but not at build time.
> > Relax this a bit if COMPILE_TEST is enabled to improve build coverage
> > for these drivers.
> It's really asking for trouble but it's the right thing to do. Let's see how
> many issues get reported...
It's probably fine, they get covered by allmodconfig already - it
certainly didn't immediately trigger any issues for me.
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
[-- Attachment #2: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Applied "ASoC: Intel: Make boards more available for compile test" to the asoc tree
2019-04-10 16:38 [PATCH] ASoC: Intel: Make boards more available for compile test Mark Brown
2019-04-10 18:05 ` Pierre-Louis Bossart
@ 2019-04-11 11:19 ` Mark Brown
2019-05-02 2:18 ` Mark Brown
2 siblings, 0 replies; 5+ messages in thread
From: Mark Brown @ 2019-04-11 11:19 UTC (permalink / raw)
To: Mark Brown; +Cc: Liam Girdwood, alsa-devel, Jie Yang, Pierre-Louis Bossart
The patch
ASoC: Intel: Make boards more available for compile test
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.2
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 89a7bfa3ede49fb3c38bfe6854a391553ff9132c Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@kernel.org>
Date: Wed, 10 Apr 2019 17:38:00 +0100
Subject: [PATCH] ASoC: Intel: Make boards more available for compile test
The Intel boards have very strict dependencies which make them less
available for compile test than is desirable, with requirements for
specific drivers that are only needed at runtime but not at build time.
Relax this a bit if COMPILE_TEST is enabled to improve build coverage
for these drivers.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
sound/soc/intel/boards/Kconfig | 79 +++++++++++++++++++++++-----------
1 file changed, 54 insertions(+), 25 deletions(-)
diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig
index 12d6b73e9531..07b1a02934f1 100644
--- a/sound/soc/intel/boards/Kconfig
+++ b/sound/soc/intel/boards/Kconfig
@@ -16,7 +16,9 @@ if SND_SOC_INTEL_HASWELL
config SND_SOC_INTEL_HASWELL_MACH
tristate "Haswell Lynxpoint"
- depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM
+ depends on I2C
+ depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_RT5640
help
This adds support for the Lynxpoint Audio DSP on Intel(R) Haswell
@@ -26,7 +28,10 @@ config SND_SOC_INTEL_HASWELL_MACH
config SND_SOC_INTEL_BDW_RT5677_MACH
tristate "Broadwell with RT5677 codec"
- depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM && GPIOLIB
+ depends on I2C
+ depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST
+ depends on GPIOLIB || COMPILE_TEST
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_RT5677
help
This adds support for Intel Broadwell platform based boards with
@@ -36,7 +41,9 @@ config SND_SOC_INTEL_BDW_RT5677_MACH
config SND_SOC_INTEL_BROADWELL_MACH
tristate "Broadwell Wildcatpoint"
- depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM
+ depends on I2C
+ depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_RT286
help
This adds support for the Wilcatpoint Audio DSP on Intel(R) Broadwell
@@ -49,7 +56,8 @@ if SND_SOC_INTEL_BAYTRAIL
config SND_SOC_INTEL_BYT_MAX98090_MACH
tristate "Baytrail with MAX98090 codec"
- depends on X86_INTEL_LPSS && I2C
+ depends on I2C
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_MAX98090
help
This adds audio driver for Intel Baytrail platform based boards
@@ -59,7 +67,8 @@ config SND_SOC_INTEL_BYT_MAX98090_MACH
config SND_SOC_INTEL_BYT_RT5640_MACH
tristate "Baytrail with RT5640 codec"
- depends on X86_INTEL_LPSS && I2C
+ depends on I2C
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_RT5640
help
This adds audio driver for Intel Baytrail platform based boards
@@ -72,7 +81,8 @@ if SND_SST_ATOM_HIFI2_PLATFORM
config SND_SOC_INTEL_BYTCR_RT5640_MACH
tristate "Baytrail and Baytrail-CR with RT5640 codec"
- depends on X86_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_ACPI
select SND_SOC_RT5640
help
@@ -83,7 +93,8 @@ config SND_SOC_INTEL_BYTCR_RT5640_MACH
config SND_SOC_INTEL_BYTCR_RT5651_MACH
tristate "Baytrail and Baytrail-CR with RT5651 codec"
- depends on X86_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_ACPI
select SND_SOC_RT5651
help
@@ -94,7 +105,8 @@ config SND_SOC_INTEL_BYTCR_RT5651_MACH
config SND_SOC_INTEL_CHT_BSW_RT5672_MACH
tristate "Cherrytrail & Braswell with RT5672 codec"
- depends on X86_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_ACPI
select SND_SOC_RT5670
help
@@ -105,7 +117,8 @@ config SND_SOC_INTEL_CHT_BSW_RT5672_MACH
config SND_SOC_INTEL_CHT_BSW_RT5645_MACH
tristate "Cherrytrail & Braswell with RT5645/5650 codec"
- depends on X86_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_ACPI
select SND_SOC_RT5645
help
@@ -116,7 +129,8 @@ config SND_SOC_INTEL_CHT_BSW_RT5645_MACH
config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH
tristate "Cherrytrail & Braswell with MAX98090 & TI codec"
- depends on X86_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_MAX98090
select SND_SOC_TS3A227E
help
@@ -127,7 +141,8 @@ config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH
config SND_SOC_INTEL_CHT_BSW_NAU8824_MACH
tristate "Cherrytrail & Braswell with NAU88L24 codec"
- depends on X86_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_ACPI
select SND_SOC_NAU8824
help
@@ -138,7 +153,8 @@ config SND_SOC_INTEL_CHT_BSW_NAU8824_MACH
config SND_SOC_INTEL_BYT_CHT_DA7213_MACH
tristate "Baytrail & Cherrytrail with DA7212/7213 codec"
- depends on X86_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_ACPI
select SND_SOC_DA7213
help
@@ -149,7 +165,8 @@ config SND_SOC_INTEL_BYT_CHT_DA7213_MACH
config SND_SOC_INTEL_BYT_CHT_ES8316_MACH
tristate "Baytrail & Cherrytrail with ES8316 codec"
- depends on X86_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_ACPI
select SND_SOC_ES8316
help
@@ -160,7 +177,8 @@ config SND_SOC_INTEL_BYT_CHT_ES8316_MACH
config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH
tristate "Baytrail & Cherrytrail platform with no codec (MinnowBoard MAX, Up)"
- depends on X86_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on X86_INTEL_LPSS || COMPILE_TEST
help
This adds support for ASoC machine driver for the MinnowBoard Max or
Up boards and provides access to I2S signals on the Low-Speed
@@ -176,7 +194,8 @@ if SND_SOC_INTEL_SKL
config SND_SOC_INTEL_SKL_RT286_MACH
tristate "SKL with RT286 I2S mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
select SND_SOC_RT286
select SND_SOC_DMIC
select SND_SOC_HDAC_HDMI
@@ -188,7 +207,8 @@ config SND_SOC_INTEL_SKL_RT286_MACH
config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH
tristate "SKL with NAU88L25 and SSM4567 in I2S Mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
select SND_SOC_NAU8825
select SND_SOC_SSM4567
select SND_SOC_DMIC
@@ -201,7 +221,8 @@ config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH
config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH
tristate "SKL with NAU88L25 and MAX98357A in I2S Mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
select SND_SOC_NAU8825
select SND_SOC_MAX98357A
select SND_SOC_DMIC
@@ -218,7 +239,8 @@ if SND_SOC_INTEL_APL
config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH
tristate "Broxton with DA7219 and MAX98357A in I2S Mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
select SND_SOC_DA7219
select SND_SOC_MAX98357A
select SND_SOC_DMIC
@@ -232,7 +254,8 @@ config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH
config SND_SOC_INTEL_BXT_RT298_MACH
tristate "Broxton with RT298 I2S mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
select SND_SOC_RT298
select SND_SOC_DMIC
select SND_SOC_HDAC_HDMI
@@ -249,7 +272,8 @@ if SND_SOC_INTEL_KBL
config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH
tristate "KBL with RT5663 and MAX98927 in I2S Mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
select SND_SOC_RT5663
select SND_SOC_MAX98927
select SND_SOC_DMIC
@@ -263,7 +287,8 @@ config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH
config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH
tristate "KBL with RT5663, RT5514 and MAX98927 in I2S Mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
depends on SPI
select SND_SOC_RT5663
select SND_SOC_RT5514
@@ -278,7 +303,8 @@ config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH
config SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH
tristate "KBL with DA7219 and MAX98357A in I2S Mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
select SND_SOC_DA7219
select SND_SOC_MAX98357A
select SND_SOC_DMIC
@@ -290,7 +316,8 @@ config SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH
config SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH
tristate "KBL with DA7219 and MAX98927 in I2S Mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
select SND_SOC_DA7219
select SND_SOC_MAX98927
select SND_SOC_MAX98373
@@ -304,7 +331,8 @@ config SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH
config SND_SOC_INTEL_KBL_RT5660_MACH
tristate "KBL with RT5660 in I2S Mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
select SND_SOC_RT5660
select SND_SOC_HDAC_HDMI
help
@@ -318,7 +346,8 @@ if SND_SOC_INTEL_GLK
config SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH
tristate "GLK with RT5682 and MAX98357A in I2S Mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
select SND_SOC_RT5682
select SND_SOC_MAX98357A
select SND_SOC_DMIC
--
2.20.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Applied "ASoC: Intel: Make boards more available for compile test" to the asoc tree
2019-04-10 16:38 [PATCH] ASoC: Intel: Make boards more available for compile test Mark Brown
2019-04-10 18:05 ` Pierre-Louis Bossart
2019-04-11 11:19 ` Applied "ASoC: Intel: Make boards more available for compile test" to the asoc tree Mark Brown
@ 2019-05-02 2:18 ` Mark Brown
2 siblings, 0 replies; 5+ messages in thread
From: Mark Brown @ 2019-05-02 2:18 UTC (permalink / raw)
To: Mark Brown; +Cc: Liam Girdwood, alsa-devel, Jie Yang, Pierre-Louis Bossart
The patch
ASoC: Intel: Make boards more available for compile test
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 164a263bf8d003e4cbb197d52b74d26df72604d7 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@kernel.org>
Date: Wed, 10 Apr 2019 17:38:00 +0100
Subject: [PATCH] ASoC: Intel: Make boards more available for compile test
The Intel boards have very strict dependencies which make them less
available for compile test than is desirable, with requirements for
specific drivers that are only needed at runtime but not at build time.
Relax this a bit if COMPILE_TEST is enabled to improve build coverage
for these drivers.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
sound/soc/intel/boards/Kconfig | 79 +++++++++++++++++++++++-----------
1 file changed, 54 insertions(+), 25 deletions(-)
diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig
index bf6d7a11f94a..fa0c88311559 100644
--- a/sound/soc/intel/boards/Kconfig
+++ b/sound/soc/intel/boards/Kconfig
@@ -16,7 +16,9 @@ if SND_SOC_INTEL_HASWELL
config SND_SOC_INTEL_HASWELL_MACH
tristate "Haswell Lynxpoint"
- depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM
+ depends on I2C
+ depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_RT5640
help
This adds support for the Lynxpoint Audio DSP on Intel(R) Haswell
@@ -30,7 +32,10 @@ if SND_SOC_INTEL_HASWELL || SND_SOC_SOF_BROADWELL
config SND_SOC_INTEL_BDW_RT5677_MACH
tristate "Broadwell with RT5677 codec"
- depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM && GPIOLIB
+ depends on I2C
+ depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST
+ depends on GPIOLIB || COMPILE_TEST
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_RT5677
help
This adds support for Intel Broadwell platform based boards with
@@ -40,7 +45,9 @@ config SND_SOC_INTEL_BDW_RT5677_MACH
config SND_SOC_INTEL_BROADWELL_MACH
tristate "Broadwell Wildcatpoint"
- depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM
+ depends on I2C
+ depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_RT286
help
This adds support for the Wilcatpoint Audio DSP on Intel(R) Broadwell
@@ -53,7 +60,8 @@ if SND_SOC_INTEL_BAYTRAIL
config SND_SOC_INTEL_BYT_MAX98090_MACH
tristate "Baytrail with MAX98090 codec"
- depends on X86_INTEL_LPSS && I2C
+ depends on I2C
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_MAX98090
help
This adds audio driver for Intel Baytrail platform based boards
@@ -63,7 +71,8 @@ config SND_SOC_INTEL_BYT_MAX98090_MACH
config SND_SOC_INTEL_BYT_RT5640_MACH
tristate "Baytrail with RT5640 codec"
- depends on X86_INTEL_LPSS && I2C
+ depends on I2C
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_RT5640
help
This adds audio driver for Intel Baytrail platform based boards
@@ -76,7 +85,8 @@ if SND_SST_ATOM_HIFI2_PLATFORM || SND_SOC_SOF_BAYTRAIL
config SND_SOC_INTEL_BYTCR_RT5640_MACH
tristate "Baytrail and Baytrail-CR with RT5640 codec"
- depends on X86_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_ACPI
select SND_SOC_RT5640
help
@@ -87,7 +97,8 @@ config SND_SOC_INTEL_BYTCR_RT5640_MACH
config SND_SOC_INTEL_BYTCR_RT5651_MACH
tristate "Baytrail and Baytrail-CR with RT5651 codec"
- depends on X86_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_ACPI
select SND_SOC_RT5651
help
@@ -98,7 +109,8 @@ config SND_SOC_INTEL_BYTCR_RT5651_MACH
config SND_SOC_INTEL_CHT_BSW_RT5672_MACH
tristate "Cherrytrail & Braswell with RT5672 codec"
- depends on X86_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_ACPI
select SND_SOC_RT5670
help
@@ -109,7 +121,8 @@ config SND_SOC_INTEL_CHT_BSW_RT5672_MACH
config SND_SOC_INTEL_CHT_BSW_RT5645_MACH
tristate "Cherrytrail & Braswell with RT5645/5650 codec"
- depends on X86_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_ACPI
select SND_SOC_RT5645
help
@@ -120,7 +133,8 @@ config SND_SOC_INTEL_CHT_BSW_RT5645_MACH
config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH
tristate "Cherrytrail & Braswell with MAX98090 & TI codec"
- depends on X86_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_MAX98090
select SND_SOC_TS3A227E
help
@@ -131,7 +145,8 @@ config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH
config SND_SOC_INTEL_CHT_BSW_NAU8824_MACH
tristate "Cherrytrail & Braswell with NAU88L24 codec"
- depends on X86_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_ACPI
select SND_SOC_NAU8824
help
@@ -142,7 +157,8 @@ config SND_SOC_INTEL_CHT_BSW_NAU8824_MACH
config SND_SOC_INTEL_BYT_CHT_DA7213_MACH
tristate "Baytrail & Cherrytrail with DA7212/7213 codec"
- depends on X86_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_ACPI
select SND_SOC_DA7213
help
@@ -153,7 +169,8 @@ config SND_SOC_INTEL_BYT_CHT_DA7213_MACH
config SND_SOC_INTEL_BYT_CHT_ES8316_MACH
tristate "Baytrail & Cherrytrail with ES8316 codec"
- depends on X86_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on X86_INTEL_LPSS || COMPILE_TEST
select SND_SOC_ACPI
select SND_SOC_ES8316
help
@@ -168,7 +185,8 @@ if SND_SST_ATOM_HIFI2_PLATFORM
config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH
tristate "Baytrail & Cherrytrail platform with no codec (MinnowBoard MAX, Up)"
- depends on X86_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on X86_INTEL_LPSS || COMPILE_TEST
help
This adds support for ASoC machine driver for the MinnowBoard Max or
Up boards and provides access to I2S signals on the Low-Speed
@@ -184,7 +202,8 @@ if SND_SOC_INTEL_SKL
config SND_SOC_INTEL_SKL_RT286_MACH
tristate "SKL with RT286 I2S mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
select SND_SOC_RT286
select SND_SOC_DMIC
select SND_SOC_HDAC_HDMI
@@ -196,7 +215,8 @@ config SND_SOC_INTEL_SKL_RT286_MACH
config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH
tristate "SKL with NAU88L25 and SSM4567 in I2S Mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
select SND_SOC_NAU8825
select SND_SOC_SSM4567
select SND_SOC_DMIC
@@ -209,7 +229,8 @@ config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH
config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH
tristate "SKL with NAU88L25 and MAX98357A in I2S Mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
select SND_SOC_NAU8825
select SND_SOC_MAX98357A
select SND_SOC_DMIC
@@ -226,7 +247,8 @@ if SND_SOC_INTEL_APL
config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH
tristate "Broxton with DA7219 and MAX98357A in I2S Mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
select SND_SOC_DA7219
select SND_SOC_MAX98357A
select SND_SOC_DMIC
@@ -240,7 +262,8 @@ config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH
config SND_SOC_INTEL_BXT_RT298_MACH
tristate "Broxton with RT298 I2S mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
select SND_SOC_RT298
select SND_SOC_DMIC
select SND_SOC_HDAC_HDMI
@@ -257,7 +280,8 @@ if SND_SOC_INTEL_KBL
config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH
tristate "KBL with RT5663 and MAX98927 in I2S Mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
select SND_SOC_RT5663
select SND_SOC_MAX98927
select SND_SOC_DMIC
@@ -271,7 +295,8 @@ config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH
config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH
tristate "KBL with RT5663, RT5514 and MAX98927 in I2S Mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
depends on SPI
select SND_SOC_RT5663
select SND_SOC_RT5514
@@ -286,7 +311,8 @@ config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH
config SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH
tristate "KBL with DA7219 and MAX98357A in I2S Mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
select SND_SOC_DA7219
select SND_SOC_MAX98357A
select SND_SOC_DMIC
@@ -298,7 +324,8 @@ config SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH
config SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH
tristate "KBL with DA7219 and MAX98927 in I2S Mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
select SND_SOC_DA7219
select SND_SOC_MAX98927
select SND_SOC_MAX98373
@@ -312,7 +339,8 @@ config SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH
config SND_SOC_INTEL_KBL_RT5660_MACH
tristate "KBL with RT5660 in I2S Mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
select SND_SOC_RT5660
select SND_SOC_HDAC_HDMI
help
@@ -326,7 +354,8 @@ if SND_SOC_INTEL_GLK || (SND_SOC_SOF_GEMINILAKE && SND_SOC_SOF_HDA_LINK)
config SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH
tristate "GLK with RT5682 and MAX98357A in I2S Mode"
- depends on MFD_INTEL_LPSS && I2C && ACPI
+ depends on I2C && ACPI
+ depends on MFD_INTEL_LPSS || COMPILE_TEST
select SND_SOC_RT5682
select SND_SOC_MAX98357A
select SND_SOC_DMIC
--
2.20.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-05-02 2:18 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-10 16:38 [PATCH] ASoC: Intel: Make boards more available for compile test Mark Brown
2019-04-10 18:05 ` Pierre-Louis Bossart
2019-04-11 11:01 ` Mark Brown
2019-04-11 11:19 ` Applied "ASoC: Intel: Make boards more available for compile test" to the asoc tree Mark Brown
2019-05-02 2:18 ` Mark Brown
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.