All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v2] spi: pxa2xx: fix SCR (divisor) calculation
@ 2019-04-12  7:32 ` Flavio Suligoi
  0 siblings, 0 replies; 10+ messages in thread
From: Flavio Suligoi @ 2019-04-12  7:32 UTC (permalink / raw)
  To: Daniel Mack, Haojian Zhuang, Robert Jarzmik, Mark Brown, Jarkko Nikula
  Cc: linux-arm-kernel, linux-spi, linux-kernel, Flavio Suligoi

Calculate the divisor for the SCR (Serial Clock Rate), avoiding
that the SSP transmission rate can be greater than the device rate.

When the division between the SSP clock and the device rate generates
a reminder, we have to increment by one the divisor.
In this way the resulting SSP clock will never be greater than the
device SPI max frequency.

For example, with:

 - ssp_clk  = 50 MHz
 - dev freq = 15 MHz

without this patch the SSP clock will be greater than 15 MHz:

 - 25 MHz for PXA25x_SSP and CE4100_SSP
 - 16,56 MHz for the others

Instead, with this patch, we have in both case an SSP clock of 12.5MHz,
so the max rate of the SPI device clock is respected.

Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
---

v2: - simplify the code using "DIV_ROUND_UP"
v1: - first version

 drivers/spi/spi-pxa2xx.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index f7068cc..a35fdcb 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -884,10 +884,14 @@ static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate)
 
 	rate = min_t(int, ssp_clk, rate);
 
+	/*
+	 * Calculate the divisor for the SCR (Serial Clock Rate), avoiding
+	 * that the SSP transmission rate can be greater than the device rate
+	 */
 	if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP)
-		return (ssp_clk / (2 * rate) - 1) & 0xff;
+		return (DIV_ROUND_UP(ssp_clk, 2 * rate) - 1) & 0xff;
 	else
-		return (ssp_clk / rate - 1) & 0xfff;
+		return (DIV_ROUND_UP(ssp_clk, rate) - 1)  & 0xfff;
 }
 
 static unsigned int pxa2xx_ssp_get_clk_div(struct driver_data *drv_data,
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 10+ messages in thread
* [PATCH v2] spi: pxa2xx: fix SCR (divisor) calculation
@ 2019-04-12  7:32 ` Flavio Suligoi
  0 siblings, 0 replies; 10+ messages in thread
From: Flavio Suligoi @ 2019-04-12  7:32 UTC (permalink / raw)
  To: Daniel Mack, Haojian Zhuang, Robert Jarzmik, Mark Brown, Jarkko Nikula
  Cc: Flavio Suligoi, linux-kernel, linux-arm-kernel, linux-spi

Calculate the divisor for the SCR (Serial Clock Rate), avoiding
that the SSP transmission rate can be greater than the device rate.

When the division between the SSP clock and the device rate generates
a reminder, we have to increment by one the divisor.
In this way the resulting SSP clock will never be greater than the
device SPI max frequency.

For example, with:

 - ssp_clk  = 50 MHz
 - dev freq = 15 MHz

without this patch the SSP clock will be greater than 15 MHz:

 - 25 MHz for PXA25x_SSP and CE4100_SSP
 - 16,56 MHz for the others

Instead, with this patch, we have in both case an SSP clock of 12.5MHz,
so the max rate of the SPI device clock is respected.

Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
---

v2: - simplify the code using "DIV_ROUND_UP"
v1: - first version

 drivers/spi/spi-pxa2xx.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index f7068cc..a35fdcb 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -884,10 +884,14 @@ static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate)
 
 	rate = min_t(int, ssp_clk, rate);
 
+	/*
+	 * Calculate the divisor for the SCR (Serial Clock Rate), avoiding
+	 * that the SSP transmission rate can be greater than the device rate
+	 */
 	if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP)
-		return (ssp_clk / (2 * rate) - 1) & 0xff;
+		return (DIV_ROUND_UP(ssp_clk, 2 * rate) - 1) & 0xff;
 	else
-		return (ssp_clk / rate - 1) & 0xfff;
+		return (DIV_ROUND_UP(ssp_clk, rate) - 1)  & 0xfff;
 }
 
 static unsigned int pxa2xx_ssp_get_clk_div(struct driver_data *drv_data,
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 10+ messages in thread
* Re: [PATCH v2] spi: pxa2xx: fix SCR (divisor) calculation
  2019-04-12  7:32 ` Flavio Suligoi
@ 2019-04-12 12:35   ` Jarkko Nikula
  -1 siblings, 0 replies; 10+ messages in thread
From: Jarkko Nikula @ 2019-04-12 12:35 UTC (permalink / raw)
  To: Flavio Suligoi, Daniel Mack, Haojian Zhuang, Robert Jarzmik, Mark Brown
  Cc: linux-arm-kernel, linux-spi, linux-kernel

On 4/12/19 10:32 AM, Flavio Suligoi wrote:
> Calculate the divisor for the SCR (Serial Clock Rate), avoiding
> that the SSP transmission rate can be greater than the device rate.
> 
> When the division between the SSP clock and the device rate generates
> a reminder, we have to increment by one the divisor.
> In this way the resulting SSP clock will never be greater than the
> device SPI max frequency.
> 
> For example, with:
> 
>   - ssp_clk  = 50 MHz
>   - dev freq = 15 MHz
> 
> without this patch the SSP clock will be greater than 15 MHz:
> 
>   - 25 MHz for PXA25x_SSP and CE4100_SSP
>   - 16,56 MHz for the others
> 
> Instead, with this patch, we have in both case an SSP clock of 12.5MHz,
> so the max rate of the SPI device clock is respected.
> 
> Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
> ---
> 
> v2: - simplify the code using "DIV_ROUND_UP"
> v1: - first version
> 
>   drivers/spi/spi-pxa2xx.c | 8 ++++++--
>   1 file changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
> index f7068cc..a35fdcb 100644
> --- a/drivers/spi/spi-pxa2xx.c
> +++ b/drivers/spi/spi-pxa2xx.c
> @@ -884,10 +884,14 @@ static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate)
>   
>   	rate = min_t(int, ssp_clk, rate);
>   
> +	/*
> +	 * Calculate the divisor for the SCR (Serial Clock Rate), avoiding
> +	 * that the SSP transmission rate can be greater than the device rate
> +	 */
>   	if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP)
> -		return (ssp_clk / (2 * rate) - 1) & 0xff;
> +		return (DIV_ROUND_UP(ssp_clk, 2 * rate) - 1) & 0xff;
>   	else
> -		return (ssp_clk / rate - 1) & 0xfff;
> +		return (DIV_ROUND_UP(ssp_clk, rate) - 1)  & 0xfff;
>   }
>   
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>

^ permalink raw reply	[flat|nested] 10+ messages in thread
* Re: [PATCH v2] spi: pxa2xx: fix SCR (divisor) calculation
@ 2019-04-12 12:35   ` Jarkko Nikula
  0 siblings, 0 replies; 10+ messages in thread
From: Jarkko Nikula @ 2019-04-12 12:35 UTC (permalink / raw)
  To: Flavio Suligoi, Daniel Mack, Haojian Zhuang, Robert Jarzmik, Mark Brown
  Cc: linux-kernel, linux-arm-kernel, linux-spi

On 4/12/19 10:32 AM, Flavio Suligoi wrote:
> Calculate the divisor for the SCR (Serial Clock Rate), avoiding
> that the SSP transmission rate can be greater than the device rate.
> 
> When the division between the SSP clock and the device rate generates
> a reminder, we have to increment by one the divisor.
> In this way the resulting SSP clock will never be greater than the
> device SPI max frequency.
> 
> For example, with:
> 
>   - ssp_clk  = 50 MHz
>   - dev freq = 15 MHz
> 
> without this patch the SSP clock will be greater than 15 MHz:
> 
>   - 25 MHz for PXA25x_SSP and CE4100_SSP
>   - 16,56 MHz for the others
> 
> Instead, with this patch, we have in both case an SSP clock of 12.5MHz,
> so the max rate of the SPI device clock is respected.
> 
> Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
> ---
> 
> v2: - simplify the code using "DIV_ROUND_UP"
> v1: - first version
> 
>   drivers/spi/spi-pxa2xx.c | 8 ++++++--
>   1 file changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
> index f7068cc..a35fdcb 100644
> --- a/drivers/spi/spi-pxa2xx.c
> +++ b/drivers/spi/spi-pxa2xx.c
> @@ -884,10 +884,14 @@ static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate)
>   
>   	rate = min_t(int, ssp_clk, rate);
>   
> +	/*
> +	 * Calculate the divisor for the SCR (Serial Clock Rate), avoiding
> +	 * that the SSP transmission rate can be greater than the device rate
> +	 */
>   	if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP)
> -		return (ssp_clk / (2 * rate) - 1) & 0xff;
> +		return (DIV_ROUND_UP(ssp_clk, 2 * rate) - 1) & 0xff;
>   	else
> -		return (ssp_clk / rate - 1) & 0xfff;
> +		return (DIV_ROUND_UP(ssp_clk, rate) - 1)  & 0xfff;
>   }
>   
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 10+ messages in thread
* Applied "spi: pxa2xx: fix SCR (divisor) calculation" to the spi tree
  2019-04-12  7:32 ` Flavio Suligoi
  (?)
@ 2019-04-15  8:53   ` Mark Brown
  -1 siblings, 0 replies; 10+ messages in thread
From: Mark Brown @ 2019-04-15  8:53 UTC (permalink / raw)
  To: Flavio Suligoi
  Cc: Daniel Mack, Haojian Zhuang, Jarkko Nikula, linux-arm-kernel,
	linux-kernel, linux-spi, Mark Brown, Robert Jarzmik

The patch

   spi: pxa2xx: fix SCR (divisor) calculation

has been applied to the spi tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-5.1

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From bf0c999f7f0e8934c8db8261fb67a38770fffac2 Mon Sep 17 00:00:00 2001
From: Flavio Suligoi <f.suligoi@asem.it>
Date: Fri, 12 Apr 2019 09:32:19 +0200
Subject: [PATCH] spi: pxa2xx: fix SCR (divisor) calculation

Calculate the divisor for the SCR (Serial Clock Rate), avoiding
that the SSP transmission rate can be greater than the device rate.

When the division between the SSP clock and the device rate generates
a reminder, we have to increment by one the divisor.
In this way the resulting SSP clock will never be greater than the
device SPI max frequency.

For example, with:

 - ssp_clk  = 50 MHz
 - dev freq = 15 MHz

without this patch the SSP clock will be greater than 15 MHz:

 - 25 MHz for PXA25x_SSP and CE4100_SSP
 - 16,56 MHz for the others

Instead, with this patch, we have in both case an SSP clock of 12.5MHz,
so the max rate of the SPI device clock is respected.

Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/spi/spi-pxa2xx.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index b6ddba833d02..d2076f2f468f 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -884,10 +884,14 @@ static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate)
 
 	rate = min_t(int, ssp_clk, rate);
 
+	/*
+	 * Calculate the divisor for the SCR (Serial Clock Rate), avoiding
+	 * that the SSP transmission rate can be greater than the device rate
+	 */
 	if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP)
-		return (ssp_clk / (2 * rate) - 1) & 0xff;
+		return (DIV_ROUND_UP(ssp_clk, 2 * rate) - 1) & 0xff;
 	else
-		return (ssp_clk / rate - 1) & 0xfff;
+		return (DIV_ROUND_UP(ssp_clk, rate) - 1)  & 0xfff;
 }
 
 static unsigned int pxa2xx_ssp_get_clk_div(struct driver_data *drv_data,
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 10+ messages in thread
* Applied "spi: pxa2xx: fix SCR (divisor) calculation" to the spi tree
@ 2019-04-15  8:53   ` Mark Brown
  0 siblings, 0 replies; 10+ messages in thread
From: Mark Brown @ 2019-04-15  8:53 UTC (permalink / raw)
  To: Flavio Suligoi
  Cc: Daniel Mack, Haojian Zhuang, Jarkko Nikula, linux-arm-kernel,
	linux-kernel, linux-spi, Mark Brown, Robert Jarzmik

The patch

   spi: pxa2xx: fix SCR (divisor) calculation

has been applied to the spi tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-5.1

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From bf0c999f7f0e8934c8db8261fb67a38770fffac2 Mon Sep 17 00:00:00 2001
From: Flavio Suligoi <f.suligoi@asem.it>
Date: Fri, 12 Apr 2019 09:32:19 +0200
Subject: [PATCH] spi: pxa2xx: fix SCR (divisor) calculation

Calculate the divisor for the SCR (Serial Clock Rate), avoiding
that the SSP transmission rate can be greater than the device rate.

When the division between the SSP clock and the device rate generates
a reminder, we have to increment by one the divisor.
In this way the resulting SSP clock will never be greater than the
device SPI max frequency.

For example, with:

 - ssp_clk  = 50 MHz
 - dev freq = 15 MHz

without this patch the SSP clock will be greater than 15 MHz:

 - 25 MHz for PXA25x_SSP and CE4100_SSP
 - 16,56 MHz for the others

Instead, with this patch, we have in both case an SSP clock of 12.5MHz,
so the max rate of the SPI device clock is respected.

Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/spi/spi-pxa2xx.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index b6ddba833d02..d2076f2f468f 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -884,10 +884,14 @@ static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate)
 
 	rate = min_t(int, ssp_clk, rate);
 
+	/*
+	 * Calculate the divisor for the SCR (Serial Clock Rate), avoiding
+	 * that the SSP transmission rate can be greater than the device rate
+	 */
 	if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP)
-		return (ssp_clk / (2 * rate) - 1) & 0xff;
+		return (DIV_ROUND_UP(ssp_clk, 2 * rate) - 1) & 0xff;
 	else
-		return (ssp_clk / rate - 1) & 0xfff;
+		return (DIV_ROUND_UP(ssp_clk, rate) - 1)  & 0xfff;
 }
 
 static unsigned int pxa2xx_ssp_get_clk_div(struct driver_data *drv_data,
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 10+ messages in thread
* Applied "spi: pxa2xx: fix SCR (divisor) calculation" to the spi tree
@ 2019-04-15  8:53   ` Mark Brown
  0 siblings, 0 replies; 10+ messages in thread
From: Mark Brown @ 2019-04-15  8:53 UTC (permalink / raw)
  To: Flavio Suligoi
  Cc: linux-kernel, Haojian Zhuang, linux-spi, Mark Brown,
	Jarkko Nikula, Daniel Mack, Robert Jarzmik, linux-arm-kernel

The patch

   spi: pxa2xx: fix SCR (divisor) calculation

has been applied to the spi tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-5.1

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From bf0c999f7f0e8934c8db8261fb67a38770fffac2 Mon Sep 17 00:00:00 2001
From: Flavio Suligoi <f.suligoi@asem.it>
Date: Fri, 12 Apr 2019 09:32:19 +0200
Subject: [PATCH] spi: pxa2xx: fix SCR (divisor) calculation

Calculate the divisor for the SCR (Serial Clock Rate), avoiding
that the SSP transmission rate can be greater than the device rate.

When the division between the SSP clock and the device rate generates
a reminder, we have to increment by one the divisor.
In this way the resulting SSP clock will never be greater than the
device SPI max frequency.

For example, with:

 - ssp_clk  = 50 MHz
 - dev freq = 15 MHz

without this patch the SSP clock will be greater than 15 MHz:

 - 25 MHz for PXA25x_SSP and CE4100_SSP
 - 16,56 MHz for the others

Instead, with this patch, we have in both case an SSP clock of 12.5MHz,
so the max rate of the SPI device clock is respected.

Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/spi/spi-pxa2xx.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index b6ddba833d02..d2076f2f468f 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -884,10 +884,14 @@ static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate)
 
 	rate = min_t(int, ssp_clk, rate);
 
+	/*
+	 * Calculate the divisor for the SCR (Serial Clock Rate), avoiding
+	 * that the SSP transmission rate can be greater than the device rate
+	 */
 	if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP)
-		return (ssp_clk / (2 * rate) - 1) & 0xff;
+		return (DIV_ROUND_UP(ssp_clk, 2 * rate) - 1) & 0xff;
 	else
-		return (ssp_clk / rate - 1) & 0xfff;
+		return (DIV_ROUND_UP(ssp_clk, rate) - 1)  & 0xfff;
 }
 
 static unsigned int pxa2xx_ssp_get_clk_div(struct driver_data *drv_data,
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 10+ messages in thread
* Applied "spi: pxa2xx: fix SCR (divisor) calculation" to the spi tree
  2019-04-12  7:32 ` Flavio Suligoi
  (?)
@ 2019-05-02  2:18   ` Mark Brown
  -1 siblings, 0 replies; 10+ messages in thread
From: Mark Brown @ 2019-05-02  2:18 UTC (permalink / raw)
  To: Flavio Suligoi
  Cc: Daniel Mack, Haojian Zhuang, Jarkko Nikula, linux-arm-kernel,
	linux-kernel, linux-spi, Mark Brown, Robert Jarzmik

The patch

   spi: pxa2xx: fix SCR (divisor) calculation

has been applied to the spi tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 29f2133717c527f492933b0622a4aafe0b3cbe9e Mon Sep 17 00:00:00 2001
From: Flavio Suligoi <f.suligoi@asem.it>
Date: Fri, 12 Apr 2019 09:32:19 +0200
Subject: [PATCH] spi: pxa2xx: fix SCR (divisor) calculation

Calculate the divisor for the SCR (Serial Clock Rate), avoiding
that the SSP transmission rate can be greater than the device rate.

When the division between the SSP clock and the device rate generates
a reminder, we have to increment by one the divisor.
In this way the resulting SSP clock will never be greater than the
device SPI max frequency.

For example, with:

 - ssp_clk  = 50 MHz
 - dev freq = 15 MHz

without this patch the SSP clock will be greater than 15 MHz:

 - 25 MHz for PXA25x_SSP and CE4100_SSP
 - 16,56 MHz for the others

Instead, with this patch, we have in both case an SSP clock of 12.5MHz,
so the max rate of the SPI device clock is respected.

Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/spi/spi-pxa2xx.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index b6ddba833d02..d2076f2f468f 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -884,10 +884,14 @@ static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate)
 
 	rate = min_t(int, ssp_clk, rate);
 
+	/*
+	 * Calculate the divisor for the SCR (Serial Clock Rate), avoiding
+	 * that the SSP transmission rate can be greater than the device rate
+	 */
 	if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP)
-		return (ssp_clk / (2 * rate) - 1) & 0xff;
+		return (DIV_ROUND_UP(ssp_clk, 2 * rate) - 1) & 0xff;
 	else
-		return (ssp_clk / rate - 1) & 0xfff;
+		return (DIV_ROUND_UP(ssp_clk, rate) - 1)  & 0xfff;
 }
 
 static unsigned int pxa2xx_ssp_get_clk_div(struct driver_data *drv_data,
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 10+ messages in thread
* Applied "spi: pxa2xx: fix SCR (divisor) calculation" to the spi tree
@ 2019-05-02  2:18   ` Mark Brown
  0 siblings, 0 replies; 10+ messages in thread
From: Mark Brown @ 2019-05-02  2:18 UTC (permalink / raw)
  To: Flavio Suligoi
  Cc: Daniel Mack, Haojian Zhuang, Jarkko Nikula, linux-arm-kernel,
	linux-kernel, linux-spi, Mark Brown, Robert Jarzmik

The patch

   spi: pxa2xx: fix SCR (divisor) calculation

has been applied to the spi tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 29f2133717c527f492933b0622a4aafe0b3cbe9e Mon Sep 17 00:00:00 2001
From: Flavio Suligoi <f.suligoi@asem.it>
Date: Fri, 12 Apr 2019 09:32:19 +0200
Subject: [PATCH] spi: pxa2xx: fix SCR (divisor) calculation

Calculate the divisor for the SCR (Serial Clock Rate), avoiding
that the SSP transmission rate can be greater than the device rate.

When the division between the SSP clock and the device rate generates
a reminder, we have to increment by one the divisor.
In this way the resulting SSP clock will never be greater than the
device SPI max frequency.

For example, with:

 - ssp_clk  = 50 MHz
 - dev freq = 15 MHz

without this patch the SSP clock will be greater than 15 MHz:

 - 25 MHz for PXA25x_SSP and CE4100_SSP
 - 16,56 MHz for the others

Instead, with this patch, we have in both case an SSP clock of 12.5MHz,
so the max rate of the SPI device clock is respected.

Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/spi/spi-pxa2xx.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index b6ddba833d02..d2076f2f468f 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -884,10 +884,14 @@ static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate)
 
 	rate = min_t(int, ssp_clk, rate);
 
+	/*
+	 * Calculate the divisor for the SCR (Serial Clock Rate), avoiding
+	 * that the SSP transmission rate can be greater than the device rate
+	 */
 	if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP)
-		return (ssp_clk / (2 * rate) - 1) & 0xff;
+		return (DIV_ROUND_UP(ssp_clk, 2 * rate) - 1) & 0xff;
 	else
-		return (ssp_clk / rate - 1) & 0xfff;
+		return (DIV_ROUND_UP(ssp_clk, rate) - 1)  & 0xfff;
 }
 
 static unsigned int pxa2xx_ssp_get_clk_div(struct driver_data *drv_data,
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 10+ messages in thread
* Applied "spi: pxa2xx: fix SCR (divisor) calculation" to the spi tree
@ 2019-05-02  2:18   ` Mark Brown
  0 siblings, 0 replies; 10+ messages in thread
From: Mark Brown @ 2019-05-02  2:18 UTC (permalink / raw)
  To: Flavio Suligoi
  Cc: linux-kernel, Haojian Zhuang, linux-spi, Mark Brown,
	Jarkko Nikula, Daniel Mack, Robert Jarzmik, linux-arm-kernel

The patch

   spi: pxa2xx: fix SCR (divisor) calculation

has been applied to the spi tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 29f2133717c527f492933b0622a4aafe0b3cbe9e Mon Sep 17 00:00:00 2001
From: Flavio Suligoi <f.suligoi@asem.it>
Date: Fri, 12 Apr 2019 09:32:19 +0200
Subject: [PATCH] spi: pxa2xx: fix SCR (divisor) calculation

Calculate the divisor for the SCR (Serial Clock Rate), avoiding
that the SSP transmission rate can be greater than the device rate.

When the division between the SSP clock and the device rate generates
a reminder, we have to increment by one the divisor.
In this way the resulting SSP clock will never be greater than the
device SPI max frequency.

For example, with:

 - ssp_clk  = 50 MHz
 - dev freq = 15 MHz

without this patch the SSP clock will be greater than 15 MHz:

 - 25 MHz for PXA25x_SSP and CE4100_SSP
 - 16,56 MHz for the others

Instead, with this patch, we have in both case an SSP clock of 12.5MHz,
so the max rate of the SPI device clock is respected.

Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/spi/spi-pxa2xx.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index b6ddba833d02..d2076f2f468f 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -884,10 +884,14 @@ static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate)
 
 	rate = min_t(int, ssp_clk, rate);
 
+	/*
+	 * Calculate the divisor for the SCR (Serial Clock Rate), avoiding
+	 * that the SSP transmission rate can be greater than the device rate
+	 */
 	if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP)
-		return (ssp_clk / (2 * rate) - 1) & 0xff;
+		return (DIV_ROUND_UP(ssp_clk, 2 * rate) - 1) & 0xff;
 	else
-		return (ssp_clk / rate - 1) & 0xfff;
+		return (DIV_ROUND_UP(ssp_clk, rate) - 1)  & 0xfff;
 }
 
 static unsigned int pxa2xx_ssp_get_clk_div(struct driver_data *drv_data,
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 10+ messages in thread
end of thread, other threads:[~2019-05-02  2:20 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-12  7:32 [PATCH v2] spi: pxa2xx: fix SCR (divisor) calculation Flavio Suligoi
2019-04-12  7:32 ` Flavio Suligoi
2019-04-12 12:35 ` Jarkko Nikula
2019-04-12 12:35   ` Jarkko Nikula
2019-04-15  8:53 ` Applied "spi: pxa2xx: fix SCR (divisor) calculation" to the spi tree Mark Brown
2019-04-15  8:53   ` Mark Brown
2019-04-15  8:53   ` Mark Brown
2019-05-02  2:18 ` Mark Brown
2019-05-02  2:18   ` Mark Brown
2019-05-02  2:18   ` Mark Brown

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.