[Qemu-devel] [PULL 00/28] Kconfig for Arm machines

[Qemu-devel] [PULL 00/28] Kconfig for Arm machines

[Thomas Huth]

 Hi Peter,

the following changes since commit a6ae23831b05a11880b40f7d58e332c45a6b04f7:

  Merge remote-tracking branch 'remotes/ehabkost/tags/python-next-pull-request' into staging (2019-05-03 15:26:09 +0100)

are available in the Git repository at:

  https://gitlab.com/huth/qemu.git tags/pull-request-2019-05-05

for you to fetch changes up to 55e5578fabf744e62038f7357369a68e460fe205:

  hw/arm: Remove hard-enablement of the remaining PCI devices (2019-05-03 17:06:20 +0200)

----------------------------------------------------------------
Kconfig settings for the Arm machines
----------------------------------------------------------------

Thomas Huth (28):
      hw/pci/pci-stub: Add msi_enabled() and msi_notify() to the pci stubs
      hw/ide/ahci: Add a Kconfig switch for the AHCI-ICH9 device
      hw/arm: Express dependencies of the exynos machines with Kconfig
      hw/arm: Express dependencies of the highbank machines with Kconfig
      hw/arm: Express dependencies of integratorcp with Kconfig
      hw/arm: Express dependencies of the fsl-imx31 machine with Kconfig
      hw/arm: Express dependencies of musicpal with Kconfig
      hw/arm: Express dependencies of the OMAP machines with Kconfig
      hw/arm: Express dependencies of stellaris with Kconfig
      hw/arm: Express dependencies of realview, versatile and vexpress with Kconfig
      hw/arm: Express dependencies of the PXA2xx machines with Kconfig
      hw/arm: Express dependencies of xilinx-zynq with Kconfig
      hw/arm: Express dependencies of collie with Kconfig
      hw/arm: Express dependencies of the aspeed boards with Kconfig
      hw/arm: Express dependencies of the virt machine with Kconfig
      hw/arm: Express dependencies of netduino / stm32f2xx with Kconfig
      hw/arm: Express dependencies of allwinner / cubieboard with Kconfig
      hw/arm: Express dependencies of the MPS2 boards with Kconfig
      hw/arm: Express dependencies of the raspi machines with Kconfig
      hw/arm: Express dependencies of canon-a1100 with Kconfig
      hw/arm: Express dependencies of sabrelite with Kconfig
      hw/arm: Express dependencies of the MSF2 / EMCRAFT_SF2 machine with Kconfig
      hw/arm: Express dependencies of the remaining IMX boards with Kconfig
      hw/arm: Express dependencies of the microbit / nrf51 machine with Kconfig
      hw/arm: Express dependencies of the ZynqMP zcu102 machine with Kconfig
      hw/arm: Express dependencies of the xlnx-versal-virt machine with Kconfig
      hw/arm: Express dependencies of the musca machines with Kconfig
      hw/arm: Remove hard-enablement of the remaining PCI devices

 default-configs/aarch64-softmmu.mak |   5 -
 default-configs/arm-softmmu.mak     | 179 ++++----------------
 hw/arm/Kconfig                      | 317 +++++++++++++++++++++++++++++++++++-
 hw/arm/Makefile.objs                |  25 ++-
 hw/display/Kconfig                  |   3 +
 hw/i2c/Kconfig                      |   2 +-
 hw/ide/Kconfig                      |   6 +-
 hw/ide/Makefile.objs                |   2 +-
 hw/misc/Kconfig                     |   2 +
 hw/pci/pci-stub.c                   |  11 ++
 10 files changed, 383 insertions(+), 169 deletions(-)

[Qemu-devel] [PULL 01/28] hw/pci/pci-stub: Add msi_enabled() and msi_notify() to the pci stubs

[Thomas Huth]

Some machines have an AHCI adapter, but no PCI. To be able to
compile hw/ide/ahci.c without CONFIG_PCI, we still need the two
functions msi_enabled() and msi_notify() for linking.
This is required for the new Kconfig-like build system, if a user
wants to compile a QEMU binary with just one machine that has AHCI,
but no PCI, like the ARM "cubieboard" for example.

Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 hw/pci/pci-stub.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/hw/pci/pci-stub.c b/hw/pci/pci-stub.c
index b941a0e842..c04a5df651 100644
--- a/hw/pci/pci-stub.c
+++ b/hw/pci/pci-stub.c
@@ -53,3 +53,14 @@ uint16_t pci_requester_id(PCIDevice *dev)
     g_assert(false);
     return 0;
 }
+
+/* Required by ahci.c */
+bool msi_enabled(const PCIDevice *dev)
+{
+    return false;
+}
+
+void msi_notify(PCIDevice *dev, unsigned int vector)
+{
+    g_assert_not_reached();
+}
-- 
2.21.0

[Qemu-devel] [PULL 02/28] hw/ide/ahci: Add a Kconfig switch for the AHCI-ICH9 device

[Thomas Huth]

Some of our machines (like the ARM cubieboard) use CONFIG_AHCI for an AHCI
sysbus device, but do not use CONFIG_PCI since they do not feature a PCI
bus. With CONFIG_AHCI but without CONFIG_PCI, currently linking fails:

    ../hw/ide/ich.o: In function `pci_ich9_ahci_realize':
    hw/ide/ich.c:124: undefined reference to `pci_allocate_irq'
    hw/ide/ich.c:126: undefined reference to `pci_register_bar'
    hw/ide/ich.c:128: undefined reference to `pci_register_bar'
    hw/ide/ich.c:131: undefined reference to `pci_add_capability'
    hw/ide/ich.c:147: undefined reference to `msi_init'
    ../hw/ide/ich.o: In function `pci_ich9_uninit':
    hw/ide/ich.c:158: undefined reference to `msi_uninit'
    ../hw/ide/ich.o:(.data.rel+0x50): undefined reference to `vmstate_pci_device'

We must only compile ich.c if CONFIG_PCI is available, too, so introduce a
new config switch for this device.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 hw/ide/Kconfig       | 6 +++++-
 hw/ide/Makefile.objs | 2 +-
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/hw/ide/Kconfig b/hw/ide/Kconfig
index ab47b6a7a3..5d9106b1ac 100644
--- a/hw/ide/Kconfig
+++ b/hw/ide/Kconfig
@@ -43,10 +43,14 @@ config MICRODRIVE
     select IDE_QDEV
 
 config AHCI
+    bool
+    select IDE_QDEV
+
+config AHCI_ICH9
     bool
     default y if PCI_DEVICES
     depends on PCI
-    select IDE_QDEV
+    select AHCI
 
 config IDE_SII3112
     bool
diff --git a/hw/ide/Makefile.objs b/hw/ide/Makefile.objs
index a142add90e..faf04e0209 100644
--- a/hw/ide/Makefile.objs
+++ b/hw/ide/Makefile.objs
@@ -9,6 +9,6 @@ common-obj-$(CONFIG_IDE_MMIO) += mmio.o
 common-obj-$(CONFIG_IDE_VIA) += via.o
 common-obj-$(CONFIG_MICRODRIVE) += microdrive.o
 common-obj-$(CONFIG_AHCI) += ahci.o
-common-obj-$(CONFIG_AHCI) += ich.o
+common-obj-$(CONFIG_AHCI_ICH9) += ich.o
 common-obj-$(CONFIG_ALLWINNER_A10) += ahci-allwinner.o
 common-obj-$(CONFIG_IDE_SII3112) += sii3112.o
-- 
2.21.0

[Qemu-devel] [PULL 03/28] hw/arm: Express dependencies of the exynos machines with Kconfig

[Thomas Huth]

Add Kconfig dependencies for the Exynos-related boards (nuri and
smdkc210).
This patch is slightly based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 17 ++++++-----------
 hw/arm/Kconfig                  | 10 ++++++++++
 2 files changed, 16 insertions(+), 11 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 613d19a06d..2a11e76cc7 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -1,8 +1,14 @@
 # Default configuration for arm-softmmu
 
+# TODO: ARM_V7M is currently always required - make this more flexible!
+CONFIG_ARM_V7M=y
+
 CONFIG_PCI=y
 CONFIG_PCI_DEVICES=y
 CONFIG_PCI_TESTDEV=y
+
+CONFIG_EXYNOS4=y
+
 CONFIG_VGA=y
 CONFIG_NAND=y
 CONFIG_ECC=y
@@ -26,7 +32,6 @@ CONFIG_ADS7846=y
 CONFIG_MAX111X=y
 CONFIG_SSI_SD=y
 CONFIG_SSI_M25P80=y
-CONFIG_LAN9118=y
 CONFIG_SMC91C111=y
 CONFIG_ALLWINNER_EMAC=y
 CONFIG_IMX_FEC=y
@@ -36,21 +41,15 @@ CONFIG_PFLASH_CFI01=y
 CONFIG_PFLASH_CFI02=y
 CONFIG_MICRODRIVE=y
 CONFIG_USB_MUSB=y
-CONFIG_USB_EHCI_SYSBUS=y
 CONFIG_PLATFORM_BUS=y
 CONFIG_VIRTIO_MMIO=y
 
 CONFIG_ARM11MPCORE=y
-CONFIG_A9MPCORE=y
 CONFIG_A15MPCORE=y
 
-CONFIG_ARM_V7M=y
 CONFIG_NETDUINO2=y
 
-CONFIG_ARM_GIC=y
 CONFIG_ARM_TIMER=y
-CONFIG_ARM_MPTIMER=y
-CONFIG_A9_GTIMER=y
 CONFIG_PL011=y
 CONFIG_PL022=y
 CONFIG_PL031=y
@@ -61,11 +60,9 @@ CONFIG_PL080=y
 CONFIG_PL110=y
 CONFIG_PL181=y
 CONFIG_PL190=y
-CONFIG_PL310=y
 CONFIG_PL330=y
 CONFIG_CADENCE=y
 CONFIG_XGMAC=y
-CONFIG_EXYNOS4=y
 CONFIG_PXA2XX=y
 CONFIG_BITBANG_I2C=y
 CONFIG_FRAMEBUFFER=y
@@ -73,7 +70,6 @@ CONFIG_XILINX_SPIPS=y
 CONFIG_ZYNQ_DEVCFG=y
 
 CONFIG_ARM11SCU=y
-CONFIG_A9SCU=y
 CONFIG_DIGIC=y
 CONFIG_MARVELL_88W8618=y
 CONFIG_OMAP=y
@@ -123,7 +119,6 @@ CONFIG_VERSATILE_I2C=y
 CONFIG_PCI_EXPRESS=y
 CONFIG_PCI_EXPRESS_GENERIC_BRIDGE=y
 
-CONFIG_SDHCI=y
 CONFIG_INTEGRATOR=y
 CONFIG_INTEGRATOR_DEBUG=y
 
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index d298fbdc89..acd07b2add 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -8,7 +8,13 @@ config DIGIC
 
 config EXYNOS4
     bool
+    select A9MPCORE
+    select I2C
+    select LAN9118
+    select PL310 # cache controller
     select PTIMER
+    select SDHCI
+    select USB_EHCI_SYSBUS
 
 config HIGHBANK
     bool
@@ -104,6 +110,10 @@ config ZAURUS
 
 config A9MPCORE
     bool
+    select A9_GTIMER
+    select A9SCU       # snoop control unit
+    select ARM_GIC
+    select ARM_MPTIMER
 
 config A15MPCORE
     bool
-- 
2.21.0

[Qemu-devel] [PULL 04/28] hw/arm: Express dependencies of the highbank machines with Kconfig

[Thomas Huth]

Add Kconfig dependencies for the highbank machine (and the midway
machine).
This patch is slightly based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak |  9 +--------
 hw/arm/Kconfig                  | 11 +++++++++++
 2 files changed, 12 insertions(+), 8 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 2a11e76cc7..50a4be3cad 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -8,6 +8,7 @@ CONFIG_PCI_DEVICES=y
 CONFIG_PCI_TESTDEV=y
 
 CONFIG_EXYNOS4=y
+CONFIG_HIGHBANK=y
 
 CONFIG_VGA=y
 CONFIG_NAND=y
@@ -45,24 +46,17 @@ CONFIG_PLATFORM_BUS=y
 CONFIG_VIRTIO_MMIO=y
 
 CONFIG_ARM11MPCORE=y
-CONFIG_A15MPCORE=y
 
 CONFIG_NETDUINO2=y
 
-CONFIG_ARM_TIMER=y
-CONFIG_PL011=y
-CONFIG_PL022=y
-CONFIG_PL031=y
 CONFIG_PL041=y
 CONFIG_PL050=y
-CONFIG_PL061=y
 CONFIG_PL080=y
 CONFIG_PL110=y
 CONFIG_PL181=y
 CONFIG_PL190=y
 CONFIG_PL330=y
 CONFIG_CADENCE=y
-CONFIG_XGMAC=y
 CONFIG_PXA2XX=y
 CONFIG_BITBANG_I2C=y
 CONFIG_FRAMEBUFFER=y
@@ -150,7 +144,6 @@ CONFIG_XILINX_AXI=y
 CONFIG_PCI_EXPRESS_DESIGNWARE=y
 
 CONFIG_STRONGARM=y
-CONFIG_HIGHBANK=y
 CONFIG_MUSICPAL=y
 
 # for realview and versatilepb
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index acd07b2add..0ba377ac18 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -18,6 +18,17 @@ config EXYNOS4
 
 config HIGHBANK
     bool
+    select A9MPCORE
+    select A15MPCORE
+    select AHCI
+    select ARM_TIMER # sp804
+    select ARM_V7M
+    select PL011 # UART
+    select PL022 # Serial port
+    select PL031 # RTC
+    select PL061 # GPIO
+    select PL310 # cache controller
+    select XGMAC # ethernet
 
 config INTEGRATOR
     bool
-- 
2.21.0

Re: [Qemu-devel] [PULL 04/28] hw/arm: Express dependencies of the highbank machines with Kconfig

[Philippe Mathieu-Daudé]

Hi Thomas,

On 5/5/19 3:56 PM, Thomas Huth wrote:
> Add Kconfig dependencies for the highbank machine (and the midway
> machine).
> This patch is slightly based on earlier work by Ákos Kovács (i.e.
> his "hw/arm/Kconfig: Add ARM Kconfig" patch).
> 
> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> Signed-off-by: Thomas Huth <thuth@redhat.com>
> ---
>  default-configs/arm-softmmu.mak |  9 +--------
>  hw/arm/Kconfig                  | 11 +++++++++++
>  2 files changed, 12 insertions(+), 8 deletions(-)
> 
> diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
> index 2a11e76cc7..50a4be3cad 100644
> --- a/default-configs/arm-softmmu.mak
> +++ b/default-configs/arm-softmmu.mak
> @@ -8,6 +8,7 @@ CONFIG_PCI_DEVICES=y
>  CONFIG_PCI_TESTDEV=y
>  
>  CONFIG_EXYNOS4=y
> +CONFIG_HIGHBANK=y
>  
>  CONFIG_VGA=y
>  CONFIG_NAND=y
> @@ -45,24 +46,17 @@ CONFIG_PLATFORM_BUS=y
>  CONFIG_VIRTIO_MMIO=y
>  
>  CONFIG_ARM11MPCORE=y
> -CONFIG_A15MPCORE=y
>  
>  CONFIG_NETDUINO2=y
>  
> -CONFIG_ARM_TIMER=y
> -CONFIG_PL011=y
> -CONFIG_PL022=y
> -CONFIG_PL031=y
>  CONFIG_PL041=y
>  CONFIG_PL050=y
> -CONFIG_PL061=y
>  CONFIG_PL080=y
>  CONFIG_PL110=y
>  CONFIG_PL181=y
>  CONFIG_PL190=y
>  CONFIG_PL330=y
>  CONFIG_CADENCE=y
> -CONFIG_XGMAC=y
>  CONFIG_PXA2XX=y
>  CONFIG_BITBANG_I2C=y
>  CONFIG_FRAMEBUFFER=y
> @@ -150,7 +144,6 @@ CONFIG_XILINX_AXI=y
>  CONFIG_PCI_EXPRESS_DESIGNWARE=y
>  
>  CONFIG_STRONGARM=y
> -CONFIG_HIGHBANK=y
>  CONFIG_MUSICPAL=y
>  
>  # for realview and versatilepb
> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
> index acd07b2add..0ba377ac18 100644
> --- a/hw/arm/Kconfig
> +++ b/hw/arm/Kconfig
> @@ -18,6 +18,17 @@ config EXYNOS4
>  
>  config HIGHBANK
>      bool
> +    select A9MPCORE
> +    select A15MPCORE
> +    select AHCI
> +    select ARM_TIMER # sp804
> +    select ARM_V7M

Hmm I missed that... This machine doesn't use a v7M core, right?

> +    select PL011 # UART
> +    select PL022 # Serial port
> +    select PL031 # RTC
> +    select PL061 # GPIO
> +    select PL310 # cache controller
> +    select XGMAC # ethernet
>  
>  config INTEGRATOR
>      bool
> 

Re: [Qemu-devel] [PULL 04/28] hw/arm: Express dependencies of the highbank machines with Kconfig

[Thomas Huth]

On 30/09/2020 17.38, Philippe Mathieu-Daudé wrote:
> Hi Thomas,
> 
> On 5/5/19 3:56 PM, Thomas Huth wrote:
>> Add Kconfig dependencies for the highbank machine (and the midway
>> machine).
>> This patch is slightly based on earlier work by Ákos Kovács (i.e.
>> his "hw/arm/Kconfig: Add ARM Kconfig" patch).
>>
>> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
>> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
>> Signed-off-by: Thomas Huth <thuth@redhat.com>
>> ---
>>  default-configs/arm-softmmu.mak |  9 +--------
>>  hw/arm/Kconfig                  | 11 +++++++++++
>>  2 files changed, 12 insertions(+), 8 deletions(-)
>>
>> diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
>> index 2a11e76cc7..50a4be3cad 100644
>> --- a/default-configs/arm-softmmu.mak
>> +++ b/default-configs/arm-softmmu.mak
>> @@ -8,6 +8,7 @@ CONFIG_PCI_DEVICES=y
>>  CONFIG_PCI_TESTDEV=y
>>  
>>  CONFIG_EXYNOS4=y
>> +CONFIG_HIGHBANK=y
>>  
>>  CONFIG_VGA=y
>>  CONFIG_NAND=y
>> @@ -45,24 +46,17 @@ CONFIG_PLATFORM_BUS=y
>>  CONFIG_VIRTIO_MMIO=y
>>  
>>  CONFIG_ARM11MPCORE=y
>> -CONFIG_A15MPCORE=y
>>  
>>  CONFIG_NETDUINO2=y
>>  
>> -CONFIG_ARM_TIMER=y
>> -CONFIG_PL011=y
>> -CONFIG_PL022=y
>> -CONFIG_PL031=y
>>  CONFIG_PL041=y
>>  CONFIG_PL050=y
>> -CONFIG_PL061=y
>>  CONFIG_PL080=y
>>  CONFIG_PL110=y
>>  CONFIG_PL181=y
>>  CONFIG_PL190=y
>>  CONFIG_PL330=y
>>  CONFIG_CADENCE=y
>> -CONFIG_XGMAC=y
>>  CONFIG_PXA2XX=y
>>  CONFIG_BITBANG_I2C=y
>>  CONFIG_FRAMEBUFFER=y
>> @@ -150,7 +144,6 @@ CONFIG_XILINX_AXI=y
>>  CONFIG_PCI_EXPRESS_DESIGNWARE=y
>>  
>>  CONFIG_STRONGARM=y
>> -CONFIG_HIGHBANK=y
>>  CONFIG_MUSICPAL=y
>>  
>>  # for realview and versatilepb
>> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
>> index acd07b2add..0ba377ac18 100644
>> --- a/hw/arm/Kconfig
>> +++ b/hw/arm/Kconfig
>> @@ -18,6 +18,17 @@ config EXYNOS4
>>  
>>  config HIGHBANK
>>      bool
>> +    select A9MPCORE
>> +    select A15MPCORE
>> +    select AHCI
>> +    select ARM_TIMER # sp804
>> +    select ARM_V7M
> 
> Hmm I missed that... This machine doesn't use a v7M core, right?

I think you're right: The machines seem to use A9 and A15 ... so I guess
this was a copy-n-paste bug ... could you send a patch to clean it up,
please?

 Thomas

Re: [Qemu-devel] [PULL 04/28] hw/arm: Express dependencies of the highbank machines with Kconfig

[Philippe Mathieu-Daudé]

On 9/30/20 6:10 PM, Thomas Huth wrote:
> On 30/09/2020 17.38, Philippe Mathieu-Daudé wrote:
>> Hi Thomas,
>>
>> On 5/5/19 3:56 PM, Thomas Huth wrote:
>>> Add Kconfig dependencies for the highbank machine (and the midway
>>> machine).
>>> This patch is slightly based on earlier work by Ákos Kovács (i.e.
>>> his "hw/arm/Kconfig: Add ARM Kconfig" patch).
>>>
>>> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
>>> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
>>> Signed-off-by: Thomas Huth <thuth@redhat.com>
>>> ---
>>>  default-configs/arm-softmmu.mak |  9 +--------
>>>  hw/arm/Kconfig                  | 11 +++++++++++
>>>  2 files changed, 12 insertions(+), 8 deletions(-)
>>>
>>> diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
>>> index 2a11e76cc7..50a4be3cad 100644
>>> --- a/default-configs/arm-softmmu.mak
>>> +++ b/default-configs/arm-softmmu.mak
>>> @@ -8,6 +8,7 @@ CONFIG_PCI_DEVICES=y
>>>  CONFIG_PCI_TESTDEV=y
>>>  
>>>  CONFIG_EXYNOS4=y
>>> +CONFIG_HIGHBANK=y
>>>  
>>>  CONFIG_VGA=y
>>>  CONFIG_NAND=y
>>> @@ -45,24 +46,17 @@ CONFIG_PLATFORM_BUS=y
>>>  CONFIG_VIRTIO_MMIO=y
>>>  
>>>  CONFIG_ARM11MPCORE=y
>>> -CONFIG_A15MPCORE=y
>>>  
>>>  CONFIG_NETDUINO2=y
>>>  
>>> -CONFIG_ARM_TIMER=y
>>> -CONFIG_PL011=y
>>> -CONFIG_PL022=y
>>> -CONFIG_PL031=y
>>>  CONFIG_PL041=y
>>>  CONFIG_PL050=y
>>> -CONFIG_PL061=y
>>>  CONFIG_PL080=y
>>>  CONFIG_PL110=y
>>>  CONFIG_PL181=y
>>>  CONFIG_PL190=y
>>>  CONFIG_PL330=y
>>>  CONFIG_CADENCE=y
>>> -CONFIG_XGMAC=y
>>>  CONFIG_PXA2XX=y
>>>  CONFIG_BITBANG_I2C=y
>>>  CONFIG_FRAMEBUFFER=y
>>> @@ -150,7 +144,6 @@ CONFIG_XILINX_AXI=y
>>>  CONFIG_PCI_EXPRESS_DESIGNWARE=y
>>>  
>>>  CONFIG_STRONGARM=y
>>> -CONFIG_HIGHBANK=y
>>>  CONFIG_MUSICPAL=y
>>>  
>>>  # for realview and versatilepb
>>> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
>>> index acd07b2add..0ba377ac18 100644
>>> --- a/hw/arm/Kconfig
>>> +++ b/hw/arm/Kconfig
>>> @@ -18,6 +18,17 @@ config EXYNOS4
>>>  
>>>  config HIGHBANK
>>>      bool
>>> +    select A9MPCORE
>>> +    select A15MPCORE
>>> +    select AHCI
>>> +    select ARM_TIMER # sp804
>>> +    select ARM_V7M
>>
>> Hmm I missed that... This machine doesn't use a v7M core, right?
> 
> I think you're right: The machines seem to use A9 and A15 ... so I guess
> this was a copy-n-paste bug ... could you send a patch to clean it up,
> please?

Yes, will do.

> 
>  Thomas
> 

[Qemu-devel] [PULL 05/28] hw/arm: Express dependencies of integratorcp with Kconfig

[Thomas Huth]

This patch is slightly based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 8 +-------
 hw/arm/Kconfig                  | 8 ++++++++
 hw/display/Kconfig              | 1 +
 3 files changed, 10 insertions(+), 7 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 50a4be3cad..6195b75f48 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -9,6 +9,7 @@ CONFIG_PCI_TESTDEV=y
 
 CONFIG_EXYNOS4=y
 CONFIG_HIGHBANK=y
+CONFIG_INTEGRATOR=y
 
 CONFIG_VGA=y
 CONFIG_NAND=y
@@ -33,7 +34,6 @@ CONFIG_ADS7846=y
 CONFIG_MAX111X=y
 CONFIG_SSI_SD=y
 CONFIG_SSI_M25P80=y
-CONFIG_SMC91C111=y
 CONFIG_ALLWINNER_EMAC=y
 CONFIG_IMX_FEC=y
 CONFIG_FTGMAC100=y
@@ -50,10 +50,7 @@ CONFIG_ARM11MPCORE=y
 CONFIG_NETDUINO2=y
 
 CONFIG_PL041=y
-CONFIG_PL050=y
 CONFIG_PL080=y
-CONFIG_PL110=y
-CONFIG_PL181=y
 CONFIG_PL190=y
 CONFIG_PL330=y
 CONFIG_CADENCE=y
@@ -113,9 +110,6 @@ CONFIG_VERSATILE_I2C=y
 CONFIG_PCI_EXPRESS=y
 CONFIG_PCI_EXPRESS_GENERIC_BRIDGE=y
 
-CONFIG_INTEGRATOR=y
-CONFIG_INTEGRATOR_DEBUG=y
-
 CONFIG_ALLWINNER_A10_PIT=y
 CONFIG_ALLWINNER_A10_PIC=y
 CONFIG_ALLWINNER_A10=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 0ba377ac18..ad3b1f9b40 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -32,6 +32,14 @@ config HIGHBANK
 
 config INTEGRATOR
     bool
+    select ARM_TIMER
+    select INTEGRATOR_DEBUG
+    select PL011 # UART
+    select PL031 # RTC
+    select PL050 # keyboard/mouse
+    select PL110 # pl111 LCD controller
+    select PL181 # display
+    select SMC91C111
 
 config MAINSTONE
     bool
diff --git a/hw/display/Kconfig b/hw/display/Kconfig
index 72be57a403..a11815c9af 100644
--- a/hw/display/Kconfig
+++ b/hw/display/Kconfig
@@ -21,6 +21,7 @@ config JAZZ_LED
 
 config PL110
     bool
+    select FRAMEBUFFER
 
 config SII9022
     bool
-- 
2.21.0

[Qemu-devel] [PULL 06/28] hw/arm: Express dependencies of the fsl-imx31 machine with Kconfig

[Thomas Huth]

Add Kconfig dependencies for the fsl-imx31 / kzm machine.
This patch is slightly based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).

Reviewed-by: Peter Chubb <peter.chubb@data61.csiro.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 3 +--
 hw/arm/Kconfig                  | 4 ++++
 hw/misc/Kconfig                 | 2 ++
 3 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 6195b75f48..7f94811ccb 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -10,6 +10,7 @@ CONFIG_PCI_TESTDEV=y
 CONFIG_EXYNOS4=y
 CONFIG_HIGHBANK=y
 CONFIG_INTEGRATOR=y
+CONFIG_FSL_IMX31=y
 
 CONFIG_VGA=y
 CONFIG_NAND=y
@@ -68,7 +69,6 @@ CONFIG_TSC210X=y
 CONFIG_BLIZZARD=y
 CONFIG_ONENAND=y
 CONFIG_TUSB6010=y
-CONFIG_IMX=y
 CONFIG_MAINSTONE=y
 CONFIG_MPS2=y
 CONFIG_MUSCA=y
@@ -115,7 +115,6 @@ CONFIG_ALLWINNER_A10_PIC=y
 CONFIG_ALLWINNER_A10=y
 
 CONFIG_FSL_IMX6=y
-CONFIG_FSL_IMX31=y
 CONFIG_FSL_IMX25=y
 CONFIG_FSL_IMX7=y
 CONFIG_FSL_IMX6UL=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index ad3b1f9b40..9087b7d714 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -98,6 +98,10 @@ config FSL_IMX25
 
 config FSL_IMX31
     bool
+    select SERIAL
+    select IMX
+    select IMX_I2C
+    select LAN9118
 
 config FSL_IMX6
     bool
diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig
index 5f67d0d6d9..385e1b0cec 100644
--- a/hw/misc/Kconfig
+++ b/hw/misc/Kconfig
@@ -76,6 +76,8 @@ config ECCMEMCTL
 config IMX
     bool
     select PTIMER
+    select SSI
+    select USB_EHCI_SYSBUS
 
 config STM32F2XX_SYSCFG
     bool
-- 
2.21.0

[Qemu-devel] [PULL 07/28] hw/arm: Express dependencies of musicpal with Kconfig

[Thomas Huth]

This patch is slightly based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 6 +-----
 hw/arm/Kconfig                  | 5 +++++
 2 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 7f94811ccb..0a4d293f8a 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -11,13 +11,13 @@ CONFIG_EXYNOS4=y
 CONFIG_HIGHBANK=y
 CONFIG_INTEGRATOR=y
 CONFIG_FSL_IMX31=y
+CONFIG_MUSICPAL=y
 
 CONFIG_VGA=y
 CONFIG_NAND=y
 CONFIG_ECC=y
 CONFIG_SERIAL=y
 CONFIG_MAX7310=y
-CONFIG_WM8750=y
 CONFIG_TWL92230=y
 CONFIG_TSC2005=y
 CONFIG_LM832X=y
@@ -40,7 +40,6 @@ CONFIG_IMX_FEC=y
 CONFIG_FTGMAC100=y
 CONFIG_DS1338=y
 CONFIG_PFLASH_CFI01=y
-CONFIG_PFLASH_CFI02=y
 CONFIG_MICRODRIVE=y
 CONFIG_USB_MUSB=y
 CONFIG_PLATFORM_BUS=y
@@ -56,14 +55,12 @@ CONFIG_PL190=y
 CONFIG_PL330=y
 CONFIG_CADENCE=y
 CONFIG_PXA2XX=y
-CONFIG_BITBANG_I2C=y
 CONFIG_FRAMEBUFFER=y
 CONFIG_XILINX_SPIPS=y
 CONFIG_ZYNQ_DEVCFG=y
 
 CONFIG_ARM11SCU=y
 CONFIG_DIGIC=y
-CONFIG_MARVELL_88W8618=y
 CONFIG_OMAP=y
 CONFIG_TSC210X=y
 CONFIG_BLIZZARD=y
@@ -137,7 +134,6 @@ CONFIG_XILINX_AXI=y
 CONFIG_PCI_EXPRESS_DESIGNWARE=y
 
 CONFIG_STRONGARM=y
-CONFIG_MUSICPAL=y
 
 # for realview and versatilepb
 CONFIG_LSI_SCSI_PCI=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 9087b7d714..b9f3c3c232 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -46,7 +46,12 @@ config MAINSTONE
 
 config MUSICPAL
     bool
+    select BITBANG_I2C
+    select MARVELL_88W8618
     select PTIMER
+    select PFLASH_CFI02
+    select SERIAL
+    select WM8750
 
 config NETDUINO2
     bool
-- 
2.21.0

[Qemu-devel] [PULL 08/28] hw/arm: Express dependencies of the OMAP machines with Kconfig

[Thomas Huth]

Add Kconfig dependencies for the OMAP machines (cheetah, n800, n810,
sx1 and sx1-v1).
This patch is slightly based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 17 ++++-------------
 hw/arm/Kconfig                  | 25 +++++++++++++++++++++++++
 hw/arm/Makefile.objs            |  3 ++-
 3 files changed, 31 insertions(+), 14 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 0a4d293f8a..b7ed3c530b 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -12,16 +12,16 @@ CONFIG_HIGHBANK=y
 CONFIG_INTEGRATOR=y
 CONFIG_FSL_IMX31=y
 CONFIG_MUSICPAL=y
+CONFIG_MUSCA=y
+CONFIG_CHEETAH=y
+CONFIG_SX1=y
+CONFIG_NSERIES=y
 
 CONFIG_VGA=y
 CONFIG_NAND=y
 CONFIG_ECC=y
 CONFIG_SERIAL=y
 CONFIG_MAX7310=y
-CONFIG_TWL92230=y
-CONFIG_TSC2005=y
-CONFIG_LM832X=y
-CONFIG_TMP105=y
 CONFIG_TMP421=y
 CONFIG_PCA9552=y
 CONFIG_STELLARIS=y
@@ -39,9 +39,7 @@ CONFIG_ALLWINNER_EMAC=y
 CONFIG_IMX_FEC=y
 CONFIG_FTGMAC100=y
 CONFIG_DS1338=y
-CONFIG_PFLASH_CFI01=y
 CONFIG_MICRODRIVE=y
-CONFIG_USB_MUSB=y
 CONFIG_PLATFORM_BUS=y
 CONFIG_VIRTIO_MMIO=y
 
@@ -61,15 +59,8 @@ CONFIG_ZYNQ_DEVCFG=y
 
 CONFIG_ARM11SCU=y
 CONFIG_DIGIC=y
-CONFIG_OMAP=y
-CONFIG_TSC210X=y
-CONFIG_BLIZZARD=y
-CONFIG_ONENAND=y
-CONFIG_TUSB6010=y
 CONFIG_MAINSTONE=y
 CONFIG_MPS2=y
-CONFIG_MUSCA=y
-CONFIG_NSERIES=y
 CONFIG_RASPI=y
 CONFIG_REALVIEW=y
 CONFIG_ZAURUS=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index b9f3c3c232..71126254ff 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -2,6 +2,11 @@ config ARM_VIRT
     bool
     imply VFIO_PLATFORM
 
+config CHEETAH
+    bool
+    select OMAP
+    select TSC210X
+
 config DIGIC
     bool
     select PTIMER
@@ -58,9 +63,25 @@ config NETDUINO2
 
 config NSERIES
     bool
+    select OMAP
+    select TMP105   # tempature sensor
+    select BLIZZARD # LCD/TV controller
+    select ONENAND
+    select TSC210X  # touchscreen/sensors/audio
+    select TSC2005  # touchscreen/sensors/keypad
+    select LM832X   # GPIO keyboard chip
+    select TWL92230 # energy-management
+    select TUSB6010
 
 config OMAP
     bool
+    select FRAMEBUFFER
+    select I2C
+    select ECC
+    select NAND
+    select PFLASH_CFI01
+    select SD
+    select SERIAL
 
 config PXA2XX
     bool
@@ -74,6 +95,10 @@ config STELLARIS
 config STRONGARM
     bool
 
+config SX1
+    bool
+    select OMAP
+
 config VERSATILE
     bool
 
diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index fa57c7c770..8302b8df1d 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -9,7 +9,8 @@ obj-$(CONFIG_MAINSTONE) += mainstone.o
 obj-$(CONFIG_MUSICPAL) += musicpal.o
 obj-$(CONFIG_NETDUINO2) += netduino2.o
 obj-$(CONFIG_NSERIES) += nseries.o
-obj-$(CONFIG_OMAP) += omap_sx1.o palm.o
+obj-$(CONFIG_SX1) += omap_sx1.o
+obj-$(CONFIG_CHEETAH) += palm.o
 obj-$(CONFIG_PXA2XX) += gumstix.o spitz.o tosa.o z2.o
 obj-$(CONFIG_REALVIEW) += realview.o
 obj-$(CONFIG_STELLARIS) += stellaris.o
-- 
2.21.0

[Qemu-devel] [PULL 09/28] hw/arm: Express dependencies of stellaris with Kconfig

[Thomas Huth]

This patch is slightly based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).

Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak |  7 +------
 hw/arm/Kconfig                  | 11 +++++++++++
 2 files changed, 12 insertions(+), 6 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index b7ed3c530b..3f82d635e4 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -16,6 +16,7 @@ CONFIG_MUSCA=y
 CONFIG_CHEETAH=y
 CONFIG_SX1=y
 CONFIG_NSERIES=y
+CONFIG_STELLARIS=y
 
 CONFIG_VGA=y
 CONFIG_NAND=y
@@ -24,16 +25,10 @@ CONFIG_SERIAL=y
 CONFIG_MAX7310=y
 CONFIG_TMP421=y
 CONFIG_PCA9552=y
-CONFIG_STELLARIS=y
-CONFIG_STELLARIS_INPUT=y
-CONFIG_STELLARIS_ENET=y
-CONFIG_SSD0303=y
-CONFIG_SSD0323=y
 CONFIG_DDC=y
 CONFIG_SII9022=y
 CONFIG_ADS7846=y
 CONFIG_MAX111X=y
-CONFIG_SSI_SD=y
 CONFIG_SSI_M25P80=y
 CONFIG_ALLWINNER_EMAC=y
 CONFIG_IMX_FEC=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 71126254ff..e5a8ae5ef9 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -91,6 +91,17 @@ config REALVIEW
 
 config STELLARIS
     bool
+    select ARM_V7M
+    select CMSDK_APB_WATCHDOG
+    select I2C
+    select PL011 # UART
+    select PL022 # Serial port
+    select PL061 # GPIO
+    select SSD0303 # OLED display
+    select SSD0323 # OLED display
+    select SSI_SD
+    select STELLARIS_INPUT
+    select STELLARIS_ENET # ethernet
 
 config STRONGARM
     bool
-- 
2.21.0

[Qemu-devel] [PULL 10/28] hw/arm: Express dependencies of realview, versatile and vexpress with Kconfig

[Thomas Huth]

This patch is slightly based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 24 ++++-------------
 hw/arm/Kconfig                  | 48 +++++++++++++++++++++++++++++++++
 hw/arm/Makefile.objs            |  3 ++-
 hw/display/Kconfig              |  1 +
 hw/i2c/Kconfig                  |  2 +-
 5 files changed, 57 insertions(+), 21 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 3f82d635e4..df7d9421e0 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -3,9 +3,8 @@
 # TODO: ARM_V7M is currently always required - make this more flexible!
 CONFIG_ARM_V7M=y
 
-CONFIG_PCI=y
-CONFIG_PCI_DEVICES=y
-CONFIG_PCI_TESTDEV=y
+# CONFIG_PCI_DEVICES=n
+# CONFIG_TEST_DEVICES=n
 
 CONFIG_EXYNOS4=y
 CONFIG_HIGHBANK=y
@@ -17,6 +16,9 @@ CONFIG_CHEETAH=y
 CONFIG_SX1=y
 CONFIG_NSERIES=y
 CONFIG_STELLARIS=y
+CONFIG_REALVIEW=y
+CONFIG_VERSATILE=y
+CONFIG_VEXPRESS=y
 
 CONFIG_VGA=y
 CONFIG_NAND=y
@@ -25,8 +27,6 @@ CONFIG_SERIAL=y
 CONFIG_MAX7310=y
 CONFIG_TMP421=y
 CONFIG_PCA9552=y
-CONFIG_DDC=y
-CONFIG_SII9022=y
 CONFIG_ADS7846=y
 CONFIG_MAX111X=y
 CONFIG_SSI_M25P80=y
@@ -38,13 +38,8 @@ CONFIG_MICRODRIVE=y
 CONFIG_PLATFORM_BUS=y
 CONFIG_VIRTIO_MMIO=y
 
-CONFIG_ARM11MPCORE=y
-
 CONFIG_NETDUINO2=y
 
-CONFIG_PL041=y
-CONFIG_PL080=y
-CONFIG_PL190=y
 CONFIG_PL330=y
 CONFIG_CADENCE=y
 CONFIG_PXA2XX=y
@@ -52,12 +47,10 @@ CONFIG_FRAMEBUFFER=y
 CONFIG_XILINX_SPIPS=y
 CONFIG_ZYNQ_DEVCFG=y
 
-CONFIG_ARM11SCU=y
 CONFIG_DIGIC=y
 CONFIG_MAINSTONE=y
 CONFIG_MPS2=y
 CONFIG_RASPI=y
-CONFIG_REALVIEW=y
 CONFIG_ZAURUS=y
 CONFIG_ZYNQ=y
 CONFIG_STM32F2XX_TIMER=y
@@ -86,10 +79,6 @@ CONFIG_IOTKIT_SYSINFO=y
 CONFIG_ARMSSE_CPUID=y
 CONFIG_ARMSSE_MHU=y
 
-CONFIG_VERSATILE=y
-CONFIG_VERSATILE_PCI=y
-CONFIG_VERSATILE_I2C=y
-
 CONFIG_PCI_EXPRESS=y
 CONFIG_PCI_EXPRESS_GENERIC_BRIDGE=y
 
@@ -120,6 +109,3 @@ CONFIG_XILINX_AXI=y
 CONFIG_PCI_EXPRESS_DESIGNWARE=y
 
 CONFIG_STRONGARM=y
-
-# for realview and versatilepb
-CONFIG_LSI_SCSI_PCI=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index e5a8ae5ef9..f0e112e778 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -88,6 +88,30 @@ config PXA2XX
 
 config REALVIEW
     bool
+    imply PCI_DEVICES
+    imply PCI_TESTDEV
+    select SMC91C111
+    select LAN9118
+    select A9MPCORE
+    select A15MPCORE
+    select ARM11MPCORE
+    select ARM_TIMER
+    select VERSATILE_PCI
+    select WM8750 # audio codec
+    select LSI_SCSI_PCI
+    select PCI
+    select PL011  # UART
+    select PL031  # RTC
+    select PL041  # audio codec
+    select PL050  # keyboard/mouse
+    select PL061  # GPIO
+    select PL080  # DMA controller
+    select PL110
+    select PL181  # display
+    select PL310  # cache controller
+    select VERSATILE_I2C
+    select DS1338 # I2C RTC+NVRAM
+    select USB_OHCI
 
 config STELLARIS
     bool
@@ -112,6 +136,29 @@ config SX1
 
 config VERSATILE
     bool
+    select ARM_TIMER # sp804
+    select PFLASH_CFI01
+    select LSI_SCSI_PCI
+    select PL050  # keyboard/mouse
+    select PL080  # DMA controller
+    select PL190  # Vector PIC
+    select REALVIEW
+    select USB_OHCI
+
+config VEXPRESS
+    bool
+    select A9MPCORE
+    select A15MPCORE
+    select ARM_MPTIMER
+    select ARM_TIMER # sp804
+    select LAN9118
+    select PFLASH_CFI01
+    select PL011 # UART
+    select PL041 # audio codec
+    select PL181  # display
+    select REALVIEW
+    select SII9022
+    select VIRTIO_MMIO
 
 config ZYNQ
     bool
@@ -184,6 +231,7 @@ config A15MPCORE
 
 config ARM11MPCORE
     bool
+    select ARM11SCU
 
 config ARMSSE
     bool
diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index 8302b8df1d..bd0b45a799 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -15,7 +15,8 @@ obj-$(CONFIG_PXA2XX) += gumstix.o spitz.o tosa.o z2.o
 obj-$(CONFIG_REALVIEW) += realview.o
 obj-$(CONFIG_STELLARIS) += stellaris.o
 obj-$(CONFIG_STRONGARM) += collie.o
-obj-$(CONFIG_VERSATILE) += vexpress.o versatilepb.o
+obj-$(CONFIG_VERSATILE) += versatilepb.o
+obj-$(CONFIG_VEXPRESS) += vexpress.o
 obj-$(CONFIG_ZYNQ) += xilinx_zynq.o
 
 obj-$(CONFIG_ARM_V7M) += armv7m.o
diff --git a/hw/display/Kconfig b/hw/display/Kconfig
index a11815c9af..0577e68c8e 100644
--- a/hw/display/Kconfig
+++ b/hw/display/Kconfig
@@ -26,6 +26,7 @@ config PL110
 config SII9022
     bool
     depends on I2C
+    select DDC
 
 config SSD0303
     bool
diff --git a/hw/i2c/Kconfig b/hw/i2c/Kconfig
index 820b24de5b..aee961541c 100644
--- a/hw/i2c/Kconfig
+++ b/hw/i2c/Kconfig
@@ -12,7 +12,7 @@ config DDC
 
 config VERSATILE_I2C
     bool
-    select I2C
+    select BITBANG_I2C
 
 config ACPI_SMBUS
     bool
-- 
2.21.0

[Qemu-devel] [PULL 11/28] hw/arm: Express dependencies of the PXA2xx machines with Kconfig

[Thomas Huth]

Add Kconfig dependencies for the PXA2xx machines (akita, borzoi,
connex and verdex gumstix, tosa, mainstone, spitz, terrier and z2).
This patch is based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 15 ++++--------
 hw/arm/Kconfig                  | 42 +++++++++++++++++++++++++++++++++
 hw/arm/Makefile.objs            |  5 +++-
 3 files changed, 51 insertions(+), 11 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index df7d9421e0..f39a854f2e 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -19,22 +19,20 @@ CONFIG_STELLARIS=y
 CONFIG_REALVIEW=y
 CONFIG_VERSATILE=y
 CONFIG_VEXPRESS=y
+CONFIG_MAINSTONE=y
+CONFIG_GUMSTIX=y
+CONFIG_SPITZ=y
+CONFIG_TOSA=y
+CONFIG_Z2=y
 
 CONFIG_VGA=y
-CONFIG_NAND=y
-CONFIG_ECC=y
-CONFIG_SERIAL=y
-CONFIG_MAX7310=y
 CONFIG_TMP421=y
 CONFIG_PCA9552=y
-CONFIG_ADS7846=y
-CONFIG_MAX111X=y
 CONFIG_SSI_M25P80=y
 CONFIG_ALLWINNER_EMAC=y
 CONFIG_IMX_FEC=y
 CONFIG_FTGMAC100=y
 CONFIG_DS1338=y
-CONFIG_MICRODRIVE=y
 CONFIG_PLATFORM_BUS=y
 CONFIG_VIRTIO_MMIO=y
 
@@ -42,16 +40,13 @@ CONFIG_NETDUINO2=y
 
 CONFIG_PL330=y
 CONFIG_CADENCE=y
-CONFIG_PXA2XX=y
 CONFIG_FRAMEBUFFER=y
 CONFIG_XILINX_SPIPS=y
 CONFIG_ZYNQ_DEVCFG=y
 
 CONFIG_DIGIC=y
-CONFIG_MAINSTONE=y
 CONFIG_MPS2=y
 CONFIG_RASPI=y
-CONFIG_ZAURUS=y
 CONFIG_ZYNQ=y
 CONFIG_STM32F2XX_TIMER=y
 CONFIG_STM32F2XX_USART=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index f0e112e778..79706ed0ce 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -48,6 +48,9 @@ config INTEGRATOR
 
 config MAINSTONE
     bool
+    select PXA2XX
+    select PFLASH_CFI01
+    select SMC91C111
 
 config MUSICPAL
     bool
@@ -85,6 +88,43 @@ config OMAP
 
 config PXA2XX
     bool
+    select FRAMEBUFFER
+    select I2C
+    select SERIAL
+    select SD
+    select SSI
+    select USB_OHCI
+
+config GUMSTIX
+    bool
+    select PFLASH_CFI01
+    select SMC91C111
+    select PXA2XX
+
+config TOSA
+    bool
+    select ZAURUS  # scoop
+    select MICRODRIVE
+    select PXA2XX
+
+config SPITZ
+    bool
+    select ADS7846 # display
+    select MAX111X # A/D converter
+    select WM8750  # audio codec
+    select MAX7310 # GPIO expander
+    select ZAURUS  # scoop
+    select NAND    # memory
+    select ECC     # Error-correcting for NAND
+    select MICRODRIVE
+    select PXA2XX
+
+config Z2
+    bool
+    select PFLASH_CFI01
+    select WM8750
+    select PL011 # UART
+    select PXA2XX
 
 config REALVIEW
     bool
@@ -218,6 +258,8 @@ config MSF2
 
 config ZAURUS
     bool
+    select NAND
+    select ECC
 
 config A9MPCORE
     bool
diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index bd0b45a799..00328d1b0b 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -11,7 +11,10 @@ obj-$(CONFIG_NETDUINO2) += netduino2.o
 obj-$(CONFIG_NSERIES) += nseries.o
 obj-$(CONFIG_SX1) += omap_sx1.o
 obj-$(CONFIG_CHEETAH) += palm.o
-obj-$(CONFIG_PXA2XX) += gumstix.o spitz.o tosa.o z2.o
+obj-$(CONFIG_GUMSTIX) += gumstix.o
+obj-$(CONFIG_SPITZ) += spitz.o
+obj-$(CONFIG_TOSA) += tosa.o
+obj-$(CONFIG_Z2) += z2.o
 obj-$(CONFIG_REALVIEW) += realview.o
 obj-$(CONFIG_STELLARIS) += stellaris.o
 obj-$(CONFIG_STRONGARM) += collie.o
-- 
2.21.0

[Qemu-devel] [PULL 12/28] hw/arm: Express dependencies of xilinx-zynq with Kconfig

[Thomas Huth]

Add Kconfig dependencies for the xilinx-zynq-a9 board.
This patch is based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak |  7 +------
 hw/arm/Kconfig                  | 12 ++++++++++++
 2 files changed, 13 insertions(+), 6 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index f39a854f2e..af78e7c892 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -19,6 +19,7 @@ CONFIG_STELLARIS=y
 CONFIG_REALVIEW=y
 CONFIG_VERSATILE=y
 CONFIG_VEXPRESS=y
+CONFIG_ZYNQ=y
 CONFIG_MAINSTONE=y
 CONFIG_GUMSTIX=y
 CONFIG_SPITZ=y
@@ -38,16 +39,11 @@ CONFIG_VIRTIO_MMIO=y
 
 CONFIG_NETDUINO2=y
 
-CONFIG_PL330=y
-CONFIG_CADENCE=y
 CONFIG_FRAMEBUFFER=y
-CONFIG_XILINX_SPIPS=y
-CONFIG_ZYNQ_DEVCFG=y
 
 CONFIG_DIGIC=y
 CONFIG_MPS2=y
 CONFIG_RASPI=y
-CONFIG_ZYNQ=y
 CONFIG_STM32F2XX_TIMER=y
 CONFIG_STM32F2XX_USART=y
 CONFIG_STM32F2XX_SYSCFG=y
@@ -100,7 +96,6 @@ CONFIG_SMBUS_EEPROM=y
 CONFIG_GPIO_KEY=y
 CONFIG_MSF2=y
 CONFIG_FW_CFG_DMA=y
-CONFIG_XILINX_AXI=y
 CONFIG_PCI_EXPRESS_DESIGNWARE=y
 
 CONFIG_STRONGARM=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 79706ed0ce..dfdc1b1fd6 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -202,6 +202,18 @@ config VEXPRESS
 
 config ZYNQ
     bool
+    select A9MPCORE
+    select CADENCE # UART
+    select PFLASH_CFI02
+    select PL330
+    select SDHCI
+    select SSI_M25P80
+    select USB_EHCI_SYSBUS
+    select XILINX # UART
+    select XILINX_AXI
+    select XILINX_SPI
+    select XILINX_SPIPS
+    select ZYNQ_DEVCFG
 
 config ARM_V7M
     bool
-- 
2.21.0

[Qemu-devel] [PULL 13/28] hw/arm: Express dependencies of collie with Kconfig

[Thomas Huth]

Add Kconfig dependencies for the Strongarm collie machine.
This patch is based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 3 +--
 hw/arm/Kconfig                  | 7 +++++++
 hw/arm/Makefile.objs            | 2 +-
 3 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index af78e7c892..25e8f717ac 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -25,6 +25,7 @@ CONFIG_GUMSTIX=y
 CONFIG_SPITZ=y
 CONFIG_TOSA=y
 CONFIG_Z2=y
+CONFIG_COLLIE=y
 
 CONFIG_VGA=y
 CONFIG_TMP421=y
@@ -97,5 +98,3 @@ CONFIG_GPIO_KEY=y
 CONFIG_MSF2=y
 CONFIG_FW_CFG_DMA=y
 CONFIG_PCI_EXPRESS_DESIGNWARE=y
-
-CONFIG_STRONGARM=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index dfdc1b1fd6..a507144d9a 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -169,6 +169,13 @@ config STELLARIS
 
 config STRONGARM
     bool
+    select PXA2XX
+
+config COLLIE
+    bool
+    select PFLASH_CFI01
+    select ZAURUS  # scoop
+    select STRONGARM
 
 config SX1
     bool
diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index 00328d1b0b..729e711b87 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -17,7 +17,7 @@ obj-$(CONFIG_TOSA) += tosa.o
 obj-$(CONFIG_Z2) += z2.o
 obj-$(CONFIG_REALVIEW) += realview.o
 obj-$(CONFIG_STELLARIS) += stellaris.o
-obj-$(CONFIG_STRONGARM) += collie.o
+obj-$(CONFIG_COLLIE) += collie.o
 obj-$(CONFIG_VERSATILE) += versatilepb.o
 obj-$(CONFIG_VEXPRESS) += vexpress.o
 obj-$(CONFIG_ZYNQ) += xilinx_zynq.o
-- 
2.21.0

[Qemu-devel] [PULL 14/28] hw/arm: Express dependencies of the aspeed boards with Kconfig

[Thomas Huth]

Dependencies have been determined by looking at hw/arm/aspeed.c

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak |  7 +------
 hw/arm/Kconfig                  | 10 ++++++++++
 2 files changed, 11 insertions(+), 6 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 25e8f717ac..2580584281 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -26,15 +26,12 @@ CONFIG_SPITZ=y
 CONFIG_TOSA=y
 CONFIG_Z2=y
 CONFIG_COLLIE=y
+CONFIG_ASPEED_SOC=y
 
 CONFIG_VGA=y
-CONFIG_TMP421=y
-CONFIG_PCA9552=y
 CONFIG_SSI_M25P80=y
 CONFIG_ALLWINNER_EMAC=y
 CONFIG_IMX_FEC=y
-CONFIG_FTGMAC100=y
-CONFIG_DS1338=y
 CONFIG_PLATFORM_BUS=y
 CONFIG_VIRTIO_MMIO=y
 
@@ -92,8 +89,6 @@ CONFIG_I82801B11=y
 CONFIG_ACPI=y
 CONFIG_ARM_VIRT=y
 CONFIG_SMBIOS=y
-CONFIG_ASPEED_SOC=y
-CONFIG_SMBUS_EEPROM=y
 CONFIG_GPIO_KEY=y
 CONFIG_MSF2=y
 CONFIG_FW_CFG_DMA=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index a507144d9a..95ac0b540e 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -255,6 +255,16 @@ config FSL_IMX6
 
 config ASPEED_SOC
     bool
+    select DS1338
+    select FTGMAC100
+    select I2C
+    select PCA9552
+    select SERIAL
+    select SMBUS_EEPROM
+    select SSI
+    select SSI_M25P80
+    select TMP105
+    select TMP421
 
 config MPS2
     bool
-- 
2.21.0

[Qemu-devel] [PULL 15/28] hw/arm: Express dependencies of the virt machine with Kconfig

[Thomas Huth]

Dependencies have been determined by looking at hw/arm/virt.c

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/aarch64-softmmu.mak |  1 -
 default-configs/arm-softmmu.mak     | 11 +----------
 hw/arm/Kconfig                      | 19 +++++++++++++++++++
 hw/arm/Makefile.objs                |  3 ++-
 4 files changed, 22 insertions(+), 12 deletions(-)

diff --git a/default-configs/aarch64-softmmu.mak b/default-configs/aarch64-softmmu.mak
index 4ea9add003..313490fb38 100644
--- a/default-configs/aarch64-softmmu.mak
+++ b/default-configs/aarch64-softmmu.mak
@@ -9,4 +9,3 @@ CONFIG_DPCD=y
 CONFIG_XLNX_ZYNQMP=y
 CONFIG_XLNX_ZYNQMP_ARM=y
 CONFIG_XLNX_VERSAL=y
-CONFIG_ARM_SMMUV3=y
diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 2580584281..f440a2b1cd 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -6,6 +6,7 @@ CONFIG_ARM_V7M=y
 # CONFIG_PCI_DEVICES=n
 # CONFIG_TEST_DEVICES=n
 
+CONFIG_ARM_VIRT=y
 CONFIG_EXYNOS4=y
 CONFIG_HIGHBANK=y
 CONFIG_INTEGRATOR=y
@@ -32,8 +33,6 @@ CONFIG_VGA=y
 CONFIG_SSI_M25P80=y
 CONFIG_ALLWINNER_EMAC=y
 CONFIG_IMX_FEC=y
-CONFIG_PLATFORM_BUS=y
-CONFIG_VIRTIO_MMIO=y
 
 CONFIG_NETDUINO2=y
 
@@ -68,9 +67,6 @@ CONFIG_IOTKIT_SYSINFO=y
 CONFIG_ARMSSE_CPUID=y
 CONFIG_ARMSSE_MHU=y
 
-CONFIG_PCI_EXPRESS=y
-CONFIG_PCI_EXPRESS_GENERIC_BRIDGE=y
-
 CONFIG_ALLWINNER_A10_PIT=y
 CONFIG_ALLWINNER_A10_PIC=y
 CONFIG_ALLWINNER_A10=y
@@ -86,10 +82,5 @@ CONFIG_PCIE_PORT=y
 CONFIG_XIO3130=y
 CONFIG_IOH3420=y
 CONFIG_I82801B11=y
-CONFIG_ACPI=y
-CONFIG_ARM_VIRT=y
-CONFIG_SMBIOS=y
-CONFIG_GPIO_KEY=y
 CONFIG_MSF2=y
-CONFIG_FW_CFG_DMA=y
 CONFIG_PCI_EXPRESS_DESIGNWARE=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 95ac0b540e..2b63adb667 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -1,6 +1,24 @@
 config ARM_VIRT
     bool
+    imply PCI_DEVICES
+    imply TEST_DEVICES
+    imply VFIO_AMD_XGBE
     imply VFIO_PLATFORM
+    imply VFIO_XGMAC
+    select A15MPCORE
+    select ACPI
+    select ARM_SMMUV3
+    select GPIO_KEY
+    select FW_CFG_DMA
+    select PCI_EXPRESS
+    select PCI_EXPRESS_GENERIC_BRIDGE
+    select PFLASH_CFI01
+    select PL011 # UART
+    select PL031 # RTC
+    select PL061 # GPIO
+    select PLATFORM_BUS
+    select SMBIOS
+    select VIRTIO_MMIO
 
 config CHEETAH
     bool
@@ -299,6 +317,7 @@ config A9MPCORE
 
 config A15MPCORE
     bool
+    select ARM_GIC
 
 config ARM11MPCORE
     bool
diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index 729e711b87..4f591ca487 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -1,4 +1,5 @@
-obj-y += boot.o sysbus-fdt.o
+obj-y += boot.o
+obj-$(CONFIG_PLATFORM_BUS) += sysbus-fdt.o
 obj-$(CONFIG_ARM_VIRT) += virt.o
 obj-$(CONFIG_ACPI) += virt-acpi-build.o
 obj-$(CONFIG_DIGIC) += digic_boards.o
-- 
2.21.0

[Qemu-devel] [PULL 16/28] hw/arm: Express dependencies of netduino / stm32f2xx with Kconfig

[Thomas Huth]

Netduino only depends on the stm32f205 SoC which in turn depends on
its components.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 9 +--------
 hw/arm/Kconfig                  | 7 +++++++
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index f440a2b1cd..c86a9f5427 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -28,25 +28,18 @@ CONFIG_TOSA=y
 CONFIG_Z2=y
 CONFIG_COLLIE=y
 CONFIG_ASPEED_SOC=y
+CONFIG_NETDUINO2=y
 
 CONFIG_VGA=y
 CONFIG_SSI_M25P80=y
 CONFIG_ALLWINNER_EMAC=y
 CONFIG_IMX_FEC=y
 
-CONFIG_NETDUINO2=y
-
 CONFIG_FRAMEBUFFER=y
 
 CONFIG_DIGIC=y
 CONFIG_MPS2=y
 CONFIG_RASPI=y
-CONFIG_STM32F2XX_TIMER=y
-CONFIG_STM32F2XX_USART=y
-CONFIG_STM32F2XX_SYSCFG=y
-CONFIG_STM32F2XX_ADC=y
-CONFIG_STM32F2XX_SPI=y
-CONFIG_STM32F205_SOC=y
 CONFIG_NRF51_SOC=y
 
 CONFIG_CMSDK_APB_TIMER=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 2b63adb667..25ba109773 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -81,6 +81,7 @@ config MUSICPAL
 
 config NETDUINO2
     bool
+    select STM32F205_SOC
 
 config NSERIES
     bool
@@ -251,6 +252,12 @@ config RASPI
 
 config STM32F205_SOC
     bool
+    select ARM_V7M
+    select STM32F2XX_TIMER
+    select STM32F2XX_USART
+    select STM32F2XX_SYSCFG
+    select STM32F2XX_ADC
+    select STM32F2XX_SPI
 
 config XLNX_ZYNQMP_ARM
     bool
-- 
2.21.0

[Qemu-devel] [PULL 17/28] hw/arm: Express dependencies of allwinner / cubieboard with Kconfig

[Thomas Huth]

Add dependencies for the Cubitech Cubieboard.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 6 +-----
 hw/arm/Kconfig                  | 9 +++++++++
 2 files changed, 10 insertions(+), 5 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index c86a9f5427..a0b9016e3a 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -7,6 +7,7 @@ CONFIG_ARM_V7M=y
 # CONFIG_TEST_DEVICES=n
 
 CONFIG_ARM_VIRT=y
+CONFIG_CUBIEBOARD=y
 CONFIG_EXYNOS4=y
 CONFIG_HIGHBANK=y
 CONFIG_INTEGRATOR=y
@@ -32,7 +33,6 @@ CONFIG_NETDUINO2=y
 
 CONFIG_VGA=y
 CONFIG_SSI_M25P80=y
-CONFIG_ALLWINNER_EMAC=y
 CONFIG_IMX_FEC=y
 
 CONFIG_FRAMEBUFFER=y
@@ -60,10 +60,6 @@ CONFIG_IOTKIT_SYSINFO=y
 CONFIG_ARMSSE_CPUID=y
 CONFIG_ARMSSE_MHU=y
 
-CONFIG_ALLWINNER_A10_PIT=y
-CONFIG_ALLWINNER_A10_PIC=y
-CONFIG_ALLWINNER_A10=y
-
 CONFIG_FSL_IMX6=y
 CONFIG_FSL_IMX25=y
 CONFIG_FSL_IMX7=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 25ba109773..0e89383f50 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -25,6 +25,10 @@ config CHEETAH
     select OMAP
     select TSC210X
 
+config CUBIEBOARD
+    bool
+    select ALLWINNER_A10
+
 config DIGIC
     bool
     select PTIMER
@@ -246,6 +250,11 @@ config ARM_V7M
 
 config ALLWINNER_A10
     bool
+    select AHCI
+    select ALLWINNER_A10_PIT
+    select ALLWINNER_A10_PIC
+    select ALLWINNER_EMAC
+    select SERIAL
 
 config RASPI
     bool
-- 
2.21.0

[Qemu-devel] [PULL 18/28] hw/arm: Express dependencies of the MPS2 boards with Kconfig

[Thomas Huth]

Add Kconfig dependencies for the mps2-an* machines.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 20 +-------------------
 hw/arm/Kconfig                  | 19 +++++++++++++++++++
 2 files changed, 20 insertions(+), 19 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index a0b9016e3a..31d31d3f4a 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -30,6 +30,7 @@ CONFIG_Z2=y
 CONFIG_COLLIE=y
 CONFIG_ASPEED_SOC=y
 CONFIG_NETDUINO2=y
+CONFIG_MPS2=y
 
 CONFIG_VGA=y
 CONFIG_SSI_M25P80=y
@@ -38,28 +39,9 @@ CONFIG_IMX_FEC=y
 CONFIG_FRAMEBUFFER=y
 
 CONFIG_DIGIC=y
-CONFIG_MPS2=y
 CONFIG_RASPI=y
 CONFIG_NRF51_SOC=y
 
-CONFIG_CMSDK_APB_TIMER=y
-CONFIG_CMSDK_APB_DUALTIMER=y
-CONFIG_CMSDK_APB_UART=y
-CONFIG_CMSDK_APB_WATCHDOG=y
-
-CONFIG_MPS2_FPGAIO=y
-CONFIG_MPS2_SCC=y
-
-CONFIG_TZ_MPC=y
-CONFIG_TZ_MSC=y
-CONFIG_TZ_PPC=y
-CONFIG_ARMSSE=y
-CONFIG_IOTKIT_SECCTL=y
-CONFIG_IOTKIT_SYSCTL=y
-CONFIG_IOTKIT_SYSINFO=y
-CONFIG_ARMSSE_CPUID=y
-CONFIG_ARMSSE_MHU=y
-
 CONFIG_FSL_IMX6=y
 CONFIG_FSL_IMX25=y
 CONFIG_FSL_IMX7=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 0e89383f50..55f7e5bfce 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -302,6 +302,12 @@ config ASPEED_SOC
 
 config MPS2
     bool
+    select ARMSSE
+    select LAN9118
+    select MPS2_FPGAIO
+    select MPS2_SCC
+    select PL022    # Serial port
+    select PL080    # DMA controller
 
 config FSL_IMX7
     bool
@@ -341,6 +347,19 @@ config ARM11MPCORE
 
 config ARMSSE
     bool
+    select ARM_V7M
+    select ARMSSE_CPUID
+    select ARMSSE_MHU
+    select CMSDK_APB_TIMER
+    select CMSDK_APB_DUALTIMER
+    select CMSDK_APB_UART
+    select CMSDK_APB_WATCHDOG
+    select IOTKIT_SECCTL
+    select IOTKIT_SYSCTL
+    select IOTKIT_SYSINFO
+    select TZ_MPC
+    select TZ_MSC
+    select TZ_PPC
 
 config ARMSSE_CPUID
     bool
-- 
2.21.0

[Qemu-devel] [PULL 19/28] hw/arm: Express dependencies of the raspi machines with Kconfig

[Thomas Huth]

Most of the code is directly controlled by the CONFIG_RASPI switch,
so not much to add here additionally.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 4 +---
 hw/arm/Kconfig                  | 3 +++
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 31d31d3f4a..22bff20b32 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -31,15 +31,13 @@ CONFIG_COLLIE=y
 CONFIG_ASPEED_SOC=y
 CONFIG_NETDUINO2=y
 CONFIG_MPS2=y
+CONFIG_RASPI=y
 
 CONFIG_VGA=y
 CONFIG_SSI_M25P80=y
 CONFIG_IMX_FEC=y
 
-CONFIG_FRAMEBUFFER=y
-
 CONFIG_DIGIC=y
-CONFIG_RASPI=y
 CONFIG_NRF51_SOC=y
 
 CONFIG_FSL_IMX6=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 55f7e5bfce..40be78303c 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -258,6 +258,9 @@ config ALLWINNER_A10
 
 config RASPI
     bool
+    select FRAMEBUFFER
+    select PL011 # UART
+    select SDHCI
 
 config STM32F205_SOC
     bool
-- 
2.21.0

[Qemu-devel] [PULL 20/28] hw/arm: Express dependencies of canon-a1100 with Kconfig

[Thomas Huth]

Add Kconfig dependencies for the DIGIC / canon-a1100 machine.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 2 +-
 hw/arm/Kconfig                  | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 22bff20b32..76508e3910 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -32,12 +32,12 @@ CONFIG_ASPEED_SOC=y
 CONFIG_NETDUINO2=y
 CONFIG_MPS2=y
 CONFIG_RASPI=y
+CONFIG_DIGIC=y
 
 CONFIG_VGA=y
 CONFIG_SSI_M25P80=y
 CONFIG_IMX_FEC=y
 
-CONFIG_DIGIC=y
 CONFIG_NRF51_SOC=y
 
 CONFIG_FSL_IMX6=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 40be78303c..abf2af0967 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -32,6 +32,7 @@ config CUBIEBOARD
 config DIGIC
     bool
     select PTIMER
+    select PFLASH_CFI02
 
 config EXYNOS4
     bool
-- 
2.21.0

[Qemu-devel] [PULL 21/28] hw/arm: Express dependencies of sabrelite with Kconfig

[Thomas Huth]

Add Kconfig dependencies for the Sabrelite / iMX6 machine.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 4 +---
 hw/arm/Kconfig                  | 9 +++++++++
 hw/arm/Makefile.objs            | 3 ++-
 3 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 76508e3910..ef7dd7156a 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -33,6 +33,7 @@ CONFIG_NETDUINO2=y
 CONFIG_MPS2=y
 CONFIG_RASPI=y
 CONFIG_DIGIC=y
+CONFIG_SABRELITE=y
 
 CONFIG_VGA=y
 CONFIG_SSI_M25P80=y
@@ -40,13 +41,10 @@ CONFIG_IMX_FEC=y
 
 CONFIG_NRF51_SOC=y
 
-CONFIG_FSL_IMX6=y
 CONFIG_FSL_IMX25=y
 CONFIG_FSL_IMX7=y
 CONFIG_FSL_IMX6UL=y
 
-CONFIG_IMX_I2C=y
-
 CONFIG_PCIE_PORT=y
 CONFIG_XIO3130=y
 CONFIG_IOH3420=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index abf2af0967..0a1eab568b 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -177,6 +177,11 @@ config REALVIEW
     select DS1338 # I2C RTC+NVRAM
     select USB_OHCI
 
+config SABRELITE
+    bool
+    select FSL_IMX6
+    select SSI_M25P80
+
 config STELLARIS
     bool
     select ARM_V7M
@@ -290,6 +295,10 @@ config FSL_IMX31
 
 config FSL_IMX6
     bool
+    select A9MPCORE
+    select IMX
+    select IMX_FEC
+    select IMX_I2C
 
 config ASPEED_SOC
     bool
diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index 4f591ca487..fadd69882c 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -22,6 +22,7 @@ obj-$(CONFIG_COLLIE) += collie.o
 obj-$(CONFIG_VERSATILE) += versatilepb.o
 obj-$(CONFIG_VEXPRESS) += vexpress.o
 obj-$(CONFIG_ZYNQ) += xilinx_zynq.o
+obj-$(CONFIG_SABRELITE) += sabrelite.o
 
 obj-$(CONFIG_ARM_V7M) += armv7m.o
 obj-$(CONFIG_EXYNOS4) += exynos4210.o
@@ -36,7 +37,7 @@ obj-$(CONFIG_XLNX_ZYNQMP_ARM) += xlnx-zynqmp.o xlnx-zcu102.o
 obj-$(CONFIG_XLNX_VERSAL) += xlnx-versal.o xlnx-versal-virt.o
 obj-$(CONFIG_FSL_IMX25) += fsl-imx25.o imx25_pdk.o
 obj-$(CONFIG_FSL_IMX31) += fsl-imx31.o kzm.o
-obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o sabrelite.o
+obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o
 obj-$(CONFIG_ASPEED_SOC) += aspeed_soc.o aspeed.o
 obj-$(CONFIG_MPS2) += mps2.o
 obj-$(CONFIG_MPS2) += mps2-tz.o
-- 
2.21.0

[Qemu-devel] [PULL 22/28] hw/arm: Express dependencies of the MSF2 / EMCRAFT_SF2 machine with Kconfig

[Thomas Huth]

Add Kconfig dependencies for the emcraft-sf2 machine - we also
distinguish between the machine (CONFIG_EMCRAFT_SF2) and the SoC
(CONFIG_MSF2) now.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 3 +--
 hw/arm/Kconfig                  | 8 ++++++++
 hw/arm/Makefile.objs            | 3 ++-
 3 files changed, 11 insertions(+), 3 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index ef7dd7156a..1455d083d8 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -34,9 +34,9 @@ CONFIG_MPS2=y
 CONFIG_RASPI=y
 CONFIG_DIGIC=y
 CONFIG_SABRELITE=y
+CONFIG_EMCRAFT_SF2=y
 
 CONFIG_VGA=y
-CONFIG_SSI_M25P80=y
 CONFIG_IMX_FEC=y
 
 CONFIG_NRF51_SOC=y
@@ -49,5 +49,4 @@ CONFIG_PCIE_PORT=y
 CONFIG_XIO3130=y
 CONFIG_IOH3420=y
 CONFIG_I82801B11=y
-CONFIG_MSF2=y
 CONFIG_PCI_EXPRESS_DESIGNWARE=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 0a1eab568b..7af94a8184 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -334,9 +334,17 @@ config FSL_IMX6UL
 config NRF51_SOC
     bool
 
+config EMCRAFT_SF2
+    bool
+    select MSF2
+    select SSI_M25P80
+
 config MSF2
     bool
+    select ARM_V7M
     select PTIMER
+    select SERIAL
+    select SSI
 
 config ZAURUS
     bool
diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index fadd69882c..eae9f6c442 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -4,6 +4,7 @@ obj-$(CONFIG_ARM_VIRT) += virt.o
 obj-$(CONFIG_ACPI) += virt-acpi-build.o
 obj-$(CONFIG_DIGIC) += digic_boards.o
 obj-$(CONFIG_EXYNOS4) += exynos4_boards.o
+obj-$(CONFIG_EMCRAFT_SF2) += msf2-som.o
 obj-$(CONFIG_HIGHBANK) += highbank.o
 obj-$(CONFIG_INTEGRATOR) += integratorcp.o
 obj-$(CONFIG_MAINSTONE) += mainstone.o
@@ -41,7 +42,7 @@ obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o
 obj-$(CONFIG_ASPEED_SOC) += aspeed_soc.o aspeed.o
 obj-$(CONFIG_MPS2) += mps2.o
 obj-$(CONFIG_MPS2) += mps2-tz.o
-obj-$(CONFIG_MSF2) += msf2-soc.o msf2-som.o
+obj-$(CONFIG_MSF2) += msf2-soc.o
 obj-$(CONFIG_MUSCA) += musca.o
 obj-$(CONFIG_ARMSSE) += armsse.o
 obj-$(CONFIG_FSL_IMX7) += fsl-imx7.o mcimx7d-sabre.o
-- 
2.21.0

[Qemu-devel] [PULL 23/28] hw/arm: Express dependencies of the remaining IMX boards with Kconfig

[Thomas Huth]

IMX25, IMX7 and IMX6UL were still missing the Kconfig dependencies.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak |  2 --
 hw/arm/Kconfig                  | 19 +++++++++++++++++++
 2 files changed, 19 insertions(+), 2 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 1455d083d8..6dc388c43e 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -37,7 +37,6 @@ CONFIG_SABRELITE=y
 CONFIG_EMCRAFT_SF2=y
 
 CONFIG_VGA=y
-CONFIG_IMX_FEC=y
 
 CONFIG_NRF51_SOC=y
 
@@ -49,4 +48,3 @@ CONFIG_PCIE_PORT=y
 CONFIG_XIO3130=y
 CONFIG_IOH3420=y
 CONFIG_I82801B11=y
-CONFIG_PCI_EXPRESS_DESIGNWARE=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 7af94a8184..4a14749792 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -285,6 +285,10 @@ config XLNX_VERSAL
 
 config FSL_IMX25
     bool
+    select IMX
+    select IMX_FEC
+    select IMX_I2C
+    select DS1338
 
 config FSL_IMX31
     bool
@@ -299,6 +303,7 @@ config FSL_IMX6
     select IMX
     select IMX_FEC
     select IMX_I2C
+    select SDHCI
 
 config ASPEED_SOC
     bool
@@ -324,12 +329,26 @@ config MPS2
 
 config FSL_IMX7
     bool
+    imply PCI_DEVICES
+    imply TEST_DEVICES
+    select A15MPCORE
+    select PCI
+    select IMX
+    select IMX_FEC
+    select IMX_I2C
+    select PCI_EXPRESS_DESIGNWARE
+    select SDHCI
 
 config ARM_SMMUV3
     bool
 
 config FSL_IMX6UL
     bool
+    select A15MPCORE
+    select IMX
+    select IMX_FEC
+    select IMX_I2C
+    select SDHCI
 
 config NRF51_SOC
     bool
-- 
2.21.0

[Qemu-devel] [PULL 24/28] hw/arm: Express dependencies of the microbit / nrf51 machine with Kconfig

[Thomas Huth]

Add Kconfig dependencies for the NRF51 / microbit machine.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 3 +--
 hw/arm/Kconfig                  | 6 ++++++
 hw/arm/Makefile.objs            | 3 ++-
 3 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 6dc388c43e..233937f394 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -35,11 +35,10 @@ CONFIG_RASPI=y
 CONFIG_DIGIC=y
 CONFIG_SABRELITE=y
 CONFIG_EMCRAFT_SF2=y
+CONFIG_MICROBIT=y
 
 CONFIG_VGA=y
 
-CONFIG_NRF51_SOC=y
-
 CONFIG_FSL_IMX25=y
 CONFIG_FSL_IMX7=y
 CONFIG_FSL_IMX6UL=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 4a14749792..da091ac217 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -350,8 +350,14 @@ config FSL_IMX6UL
     select IMX_I2C
     select SDHCI
 
+config MICROBIT
+    bool
+    select NRF51_SOC
+
 config NRF51_SOC
     bool
+    select I2C
+    select ARM_V7M
 
 config EMCRAFT_SF2
     bool
diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index eae9f6c442..994e67dd0d 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -8,6 +8,7 @@ obj-$(CONFIG_EMCRAFT_SF2) += msf2-som.o
 obj-$(CONFIG_HIGHBANK) += highbank.o
 obj-$(CONFIG_INTEGRATOR) += integratorcp.o
 obj-$(CONFIG_MAINSTONE) += mainstone.o
+obj-$(CONFIG_MICROBIT) += microbit.o
 obj-$(CONFIG_MUSICPAL) += musicpal.o
 obj-$(CONFIG_NETDUINO2) += netduino2.o
 obj-$(CONFIG_NSERIES) += nseries.o
@@ -48,4 +49,4 @@ obj-$(CONFIG_ARMSSE) += armsse.o
 obj-$(CONFIG_FSL_IMX7) += fsl-imx7.o mcimx7d-sabre.o
 obj-$(CONFIG_ARM_SMMUV3) += smmu-common.o smmuv3.o
 obj-$(CONFIG_FSL_IMX6UL) += fsl-imx6ul.o mcimx6ul-evk.o
-obj-$(CONFIG_NRF51_SOC) += nrf51_soc.o microbit.o
+obj-$(CONFIG_NRF51_SOC) += nrf51_soc.o
-- 
2.21.0

[Qemu-devel] [PULL 25/28] hw/arm: Express dependencies of the ZynqMP zcu102 machine with Kconfig

[Thomas Huth]

This cleans up most settings in default-configs/aarch64-softmmu.mak.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/aarch64-softmmu.mak |  4 ----
 hw/arm/Kconfig                      | 11 +++++++++++
 hw/display/Kconfig                  |  1 +
 3 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/default-configs/aarch64-softmmu.mak b/default-configs/aarch64-softmmu.mak
index 313490fb38..49ff415ee4 100644
--- a/default-configs/aarch64-softmmu.mak
+++ b/default-configs/aarch64-softmmu.mak
@@ -3,9 +3,5 @@
 # We support all the 32 bit boards so need all their config
 include arm-softmmu.mak
 
-CONFIG_AUX=y
-CONFIG_DDC=y
-CONFIG_DPCD=y
-CONFIG_XLNX_ZYNQMP=y
 CONFIG_XLNX_ZYNQMP_ARM=y
 CONFIG_XLNX_VERSAL=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index da091ac217..eff61efab9 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -279,6 +279,17 @@ config STM32F205_SOC
 
 config XLNX_ZYNQMP_ARM
     bool
+    select AHCI
+    select ARM_GIC
+    select CADENCE
+    select DDC
+    select DPCD
+    select SDHCI
+    select SSI
+    select SSI_M25P80
+    select XILINX_AXI
+    select XILINX_SPIPS
+    select XLNX_ZYNQMP
 
 config XLNX_VERSAL
     bool
diff --git a/hw/display/Kconfig b/hw/display/Kconfig
index 0577e68c8e..bb95f8d6a4 100644
--- a/hw/display/Kconfig
+++ b/hw/display/Kconfig
@@ -108,6 +108,7 @@ config VIRTIO_VGA
 
 config DPCD
     bool
+    select AUX
 
 config ATI_VGA
     bool
-- 
2.21.0

[Qemu-devel] [PULL 26/28] hw/arm: Express dependencies of the xlnx-versal-virt machine with Kconfig

[Thomas Huth]

Dependencies have been determined with trial-and-error and by
looking at the xlnx-versal.c source file.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 hw/arm/Kconfig | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index eff61efab9..9609caef87 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -293,6 +293,10 @@ config XLNX_ZYNQMP_ARM
 
 config XLNX_VERSAL
     bool
+    select ARM_GIC
+    select PL011
+    select CADENCE
+    select VIRTIO_MMIO
 
 config FSL_IMX25
     bool
-- 
2.21.0

[Qemu-devel] [PULL 27/28] hw/arm: Express dependencies of the musca machines with Kconfig

[Thomas Huth]

Dependencies have been determined with trial-and-error and by
looking at the musca.c source file.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 hw/arm/Kconfig | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 9609caef87..af8cffde9c 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -75,6 +75,12 @@ config MAINSTONE
     select PFLASH_CFI01
     select SMC91C111
 
+config MUSCA
+    bool
+    select ARMSSE
+    select PL011
+    select PL031
+
 config MUSICPAL
     bool
     select BITBANG_I2C
@@ -427,6 +433,3 @@ config ARMSSE_CPUID
 
 config ARMSSE_MHU
     bool
-
-config MUSCA
-    bool
-- 
2.21.0

[Qemu-devel] [PULL 28/28] hw/arm: Remove hard-enablement of the remaining PCI devices

[Thomas Huth]

The PCI devices should be pulled in by default if PCI_DEVICES
is set, so there is no need anymore to enforce them in the configs
file.

Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 233937f394..f23ecfd5c5 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -36,14 +36,6 @@ CONFIG_DIGIC=y
 CONFIG_SABRELITE=y
 CONFIG_EMCRAFT_SF2=y
 CONFIG_MICROBIT=y
-
-CONFIG_VGA=y
-
 CONFIG_FSL_IMX25=y
 CONFIG_FSL_IMX7=y
 CONFIG_FSL_IMX6UL=y
-
-CONFIG_PCIE_PORT=y
-CONFIG_XIO3130=y
-CONFIG_IOH3420=y
-CONFIG_I82801B11=y
-- 
2.21.0

Re: [Qemu-devel] [PULL 00/28] Kconfig for Arm machines

[Peter Maydell]

On Sun, 5 May 2019 at 14:57, Thomas Huth <thuth@redhat.com> wrote:
>
>  Hi Peter,
>
> the following changes since commit a6ae23831b05a11880b40f7d58e332c45a6b04f7:
>
>   Merge remote-tracking branch 'remotes/ehabkost/tags/python-next-pull-request' into staging (2019-05-03 15:26:09 +0100)
>
> are available in the Git repository at:
>
>   https://gitlab.com/huth/qemu.git tags/pull-request-2019-05-05
>
> for you to fetch changes up to 55e5578fabf744e62038f7357369a68e460fe205:
>
>   hw/arm: Remove hard-enablement of the remaining PCI devices (2019-05-03 17:06:20 +0200)
>
> ----------------------------------------------------------------
> Kconfig settings for the Arm machines
> ----------------------------------------------------------------

Hi Thomas. My test setup that does 'make clean' before the build
failed in 'make check':

MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))}
QTEST_QEMU_BINARY=i386-softmmu/qemu-system-i38
6 QTEST_QEMU_IMG=qemu-img tests/ahci-test -m=quick -k --tap <
/dev/null | ./scripts/tap-driver.pl --test-name="a
hci-test"
qemu-system-i386: Unknown device 'ich9-ahci' for bus 'PCIE'
Broken pipe
/home/petmay01/linaro/qemu-for-merges/tests/libqtest.c:143:
kill_qemu() detected QEMU death from signal 6 (Abort
ed) (core dumped)
Aborted (core dumped)
ERROR - too few tests run (expected 74, got 0)
/home/petmay01/linaro/qemu-for-merges/tests/Makefile.include:903:
recipe for target 'check-qtest-i386' failed

(all the builds that are just incremental without the 'make clean'
worked ok). Any idea what's happened here?

thanks
-- PMM

Re: [Qemu-devel] [PULL 00/28] Kconfig for Arm machines

[Philippe Mathieu-Daudé]

On 5/7/19 1:01 PM, Peter Maydell wrote:
> On Sun, 5 May 2019 at 14:57, Thomas Huth <thuth@redhat.com> wrote:
>>
>>  Hi Peter,
>>
>> the following changes since commit a6ae23831b05a11880b40f7d58e332c45a6b04f7:
>>
>>   Merge remote-tracking branch 'remotes/ehabkost/tags/python-next-pull-request' into staging (2019-05-03 15:26:09 +0100)
>>
>> are available in the Git repository at:
>>
>>   https://gitlab.com/huth/qemu.git tags/pull-request-2019-05-05
>>
>> for you to fetch changes up to 55e5578fabf744e62038f7357369a68e460fe205:
>>
>>   hw/arm: Remove hard-enablement of the remaining PCI devices (2019-05-03 17:06:20 +0200)
>>
>> ----------------------------------------------------------------
>> Kconfig settings for the Arm machines
>> ----------------------------------------------------------------
> 
> Hi Thomas. My test setup that does 'make clean' before the build
> failed in 'make check':
> 
> MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))}
> QTEST_QEMU_BINARY=i386-softmmu/qemu-system-i38
> 6 QTEST_QEMU_IMG=qemu-img tests/ahci-test -m=quick -k --tap <
> /dev/null | ./scripts/tap-driver.pl --test-name="a
> hci-test"
> qemu-system-i386: Unknown device 'ich9-ahci' for bus 'PCIE'
> Broken pipe
> /home/petmay01/linaro/qemu-for-merges/tests/libqtest.c:143:
> kill_qemu() detected QEMU death from signal 6 (Abort
> ed) (core dumped)
> Aborted (core dumped)
> ERROR - too few tests run (expected 74, got 0)
> /home/petmay01/linaro/qemu-for-merges/tests/Makefile.include:903:
> recipe for target 'check-qtest-i386' failed
> 
> (all the builds that are just incremental without the 'make clean'
> worked ok). Any idea what's happened here?

You found a bug in hw/i386/Kconfig :)

I noticed this while working on refactoring ICH9 for the Boston board,
but didn't expect the Q35 machine would suffer the same issue.

The quick fix is:

-- >8 --
diff --git a/hw/i386/Kconfig b/hw/i386/Kconfig
@@ -80,7 +80,7 @@ config Q35
     select PC_ACPI
     select PCI_EXPRESS_Q35
     select LPC_ICH9
-    select AHCI
+    select AHCI_ICH9
     select DIMM
     select SMBIOS
     select VMPORT
---

I'll send a patch.

Regards,

Phil.

Re: [Qemu-devel] [PULL 00/28] Kconfig for Arm machines

[Thomas Huth]

On 07/05/2019 13.52, Philippe Mathieu-Daudé wrote:
> On 5/7/19 1:01 PM, Peter Maydell wrote:
>> On Sun, 5 May 2019 at 14:57, Thomas Huth <thuth@redhat.com> wrote:
>>>
>>>  Hi Peter,
>>>
>>> the following changes since commit a6ae23831b05a11880b40f7d58e332c45a6b04f7:
>>>
>>>   Merge remote-tracking branch 'remotes/ehabkost/tags/python-next-pull-request' into staging (2019-05-03 15:26:09 +0100)
>>>
>>> are available in the Git repository at:
>>>
>>>   https://gitlab.com/huth/qemu.git tags/pull-request-2019-05-05
>>>
>>> for you to fetch changes up to 55e5578fabf744e62038f7357369a68e460fe205:
>>>
>>>   hw/arm: Remove hard-enablement of the remaining PCI devices (2019-05-03 17:06:20 +0200)
>>>
>>> ----------------------------------------------------------------
>>> Kconfig settings for the Arm machines
>>> ----------------------------------------------------------------
>>
>> Hi Thomas. My test setup that does 'make clean' before the build
>> failed in 'make check':
>>
>> MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))}
>> QTEST_QEMU_BINARY=i386-softmmu/qemu-system-i38
>> 6 QTEST_QEMU_IMG=qemu-img tests/ahci-test -m=quick -k --tap <
>> /dev/null | ./scripts/tap-driver.pl --test-name="a
>> hci-test"
>> qemu-system-i386: Unknown device 'ich9-ahci' for bus 'PCIE'
>> Broken pipe
>> /home/petmay01/linaro/qemu-for-merges/tests/libqtest.c:143:
>> kill_qemu() detected QEMU death from signal 6 (Abort
>> ed) (core dumped)
>> Aborted (core dumped)
>> ERROR - too few tests run (expected 74, got 0)
>> /home/petmay01/linaro/qemu-for-merges/tests/Makefile.include:903:
>> recipe for target 'check-qtest-i386' failed
>>
>> (all the builds that are just incremental without the 'make clean'
>> worked ok). Any idea what's happened here?
> 
> You found a bug in hw/i386/Kconfig :)
> 
> I noticed this while working on refactoring ICH9 for the Boston board,
> but didn't expect the Q35 machine would suffer the same issue.
> 
> The quick fix is:
> 
> -- >8 --
> diff --git a/hw/i386/Kconfig b/hw/i386/Kconfig
> @@ -80,7 +80,7 @@ config Q35
>      select PC_ACPI
>      select PCI_EXPRESS_Q35
>      select LPC_ICH9
> -    select AHCI
> +    select AHCI_ICH9
>      select DIMM
>      select SMBIOS
>      select VMPORT
> ---
> 
> I'll send a patch.

That config switch is not available in upstream yet, it just got
introduced by my series. But that's the right fix, I think, so I'll
squash that in and try again... (it's just weird that I can not
reproduce the build failure here locally)

 Thomas