From: Guillaume La Roque <glaroque@baylibre.com> To: linus.walleij@linaro.org, khilman@baylibre.com Cc: jbrunet@baylibre.com, linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH v5 6/6] pinctrl: meson: g12a: add DS bank value Date: Fri, 10 May 2019 10:23:24 +0200 [thread overview] Message-ID: <20190510082324.21181-7-glaroque@baylibre.com> (raw) In-Reply-To: <20190510082324.21181-1-glaroque@baylibre.com> add drive-strength bank regiter and bit value for G12A SoC Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> --- drivers/pinctrl/meson/pinctrl-meson-g12a.c | 36 +++++++++++----------- 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/drivers/pinctrl/meson/pinctrl-meson-g12a.c b/drivers/pinctrl/meson/pinctrl-meson-g12a.c index d494492e98e9..3475cd7bd2af 100644 --- a/drivers/pinctrl/meson/pinctrl-meson-g12a.c +++ b/drivers/pinctrl/meson/pinctrl-meson-g12a.c @@ -1304,28 +1304,28 @@ static struct meson_pmx_func meson_g12a_aobus_functions[] = { }; static struct meson_bank meson_g12a_periphs_banks[] = { - /* name first last irq pullen pull dir out in */ - BANK("Z", GPIOZ_0, GPIOZ_15, 12, 27, - 4, 0, 4, 0, 12, 0, 13, 0, 14, 0), - BANK("H", GPIOH_0, GPIOH_8, 28, 36, - 3, 0, 3, 0, 9, 0, 10, 0, 11, 0), - BANK("BOOT", BOOT_0, BOOT_15, 37, 52, - 0, 0, 0, 0, 0, 0, 1, 0, 2, 0), - BANK("C", GPIOC_0, GPIOC_7, 53, 60, - 1, 0, 1, 0, 3, 0, 4, 0, 5, 0), - BANK("A", GPIOA_0, GPIOA_15, 61, 76, - 5, 0, 5, 0, 16, 0, 17, 0, 18, 0), - BANK("X", GPIOX_0, GPIOX_19, 77, 96, - 2, 0, 2, 0, 6, 0, 7, 0, 8, 0), + /* name first last irq pullen pull dir out in ds */ + BANK_DS("Z", GPIOZ_0, GPIOZ_15, 12, 27, + 4, 0, 4, 0, 12, 0, 13, 0, 14, 0, 5, 0), + BANK_DS("H", GPIOH_0, GPIOH_8, 28, 36, + 3, 0, 3, 0, 9, 0, 10, 0, 11, 0, 4, 0), + BANK_DS("BOOT", BOOT_0, BOOT_15, 37, 52, + 0, 0, 0, 0, 0, 0, 1, 0, 2, 0, 0, 0), + BANK_DS("C", GPIOC_0, GPIOC_7, 53, 60, + 1, 0, 1, 0, 3, 0, 4, 0, 5, 0, 1, 0), + BANK_DS("A", GPIOA_0, GPIOA_15, 61, 76, + 5, 0, 5, 0, 16, 0, 17, 0, 18, 0, 6, 0), + BANK_DS("X", GPIOX_0, GPIOX_19, 77, 96, + 2, 0, 2, 0, 6, 0, 7, 0, 8, 0, 2, 0), }; static struct meson_bank meson_g12a_aobus_banks[] = { - /* name first last irq pullen pull dir out in */ - BANK("AO", GPIOAO_0, GPIOAO_11, 0, 11, - 3, 0, 2, 0, 0, 0, 4, 0, 1, 0), + /* name first last irq pullen pull dir out in ds */ + BANK_DS("AO", GPIOAO_0, GPIOAO_11, 0, 11, 3, 0, 2, 0, 0, 0, 4, 0, 1, 0, + 0, 0), /* GPIOE actually located in the AO bank */ - BANK("E", GPIOE_0, GPIOE_2, 97, 99, - 3, 16, 2, 16, 0, 16, 4, 16, 1, 16), + BANK_DS("E", GPIOE_0, GPIOE_2, 97, 99, 3, 16, 2, 16, 0, 16, 4, 16, 1, + 16, 1, 0), }; static struct meson_pmx_bank meson_g12a_periphs_pmx_banks[] = { -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Guillaume La Roque <glaroque@baylibre.com> To: linus.walleij@linaro.org, khilman@baylibre.com Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org, jbrunet@baylibre.com Subject: [PATCH v5 6/6] pinctrl: meson: g12a: add DS bank value Date: Fri, 10 May 2019 10:23:24 +0200 [thread overview] Message-ID: <20190510082324.21181-7-glaroque@baylibre.com> (raw) In-Reply-To: <20190510082324.21181-1-glaroque@baylibre.com> add drive-strength bank regiter and bit value for G12A SoC Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> --- drivers/pinctrl/meson/pinctrl-meson-g12a.c | 36 +++++++++++----------- 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/drivers/pinctrl/meson/pinctrl-meson-g12a.c b/drivers/pinctrl/meson/pinctrl-meson-g12a.c index d494492e98e9..3475cd7bd2af 100644 --- a/drivers/pinctrl/meson/pinctrl-meson-g12a.c +++ b/drivers/pinctrl/meson/pinctrl-meson-g12a.c @@ -1304,28 +1304,28 @@ static struct meson_pmx_func meson_g12a_aobus_functions[] = { }; static struct meson_bank meson_g12a_periphs_banks[] = { - /* name first last irq pullen pull dir out in */ - BANK("Z", GPIOZ_0, GPIOZ_15, 12, 27, - 4, 0, 4, 0, 12, 0, 13, 0, 14, 0), - BANK("H", GPIOH_0, GPIOH_8, 28, 36, - 3, 0, 3, 0, 9, 0, 10, 0, 11, 0), - BANK("BOOT", BOOT_0, BOOT_15, 37, 52, - 0, 0, 0, 0, 0, 0, 1, 0, 2, 0), - BANK("C", GPIOC_0, GPIOC_7, 53, 60, - 1, 0, 1, 0, 3, 0, 4, 0, 5, 0), - BANK("A", GPIOA_0, GPIOA_15, 61, 76, - 5, 0, 5, 0, 16, 0, 17, 0, 18, 0), - BANK("X", GPIOX_0, GPIOX_19, 77, 96, - 2, 0, 2, 0, 6, 0, 7, 0, 8, 0), + /* name first last irq pullen pull dir out in ds */ + BANK_DS("Z", GPIOZ_0, GPIOZ_15, 12, 27, + 4, 0, 4, 0, 12, 0, 13, 0, 14, 0, 5, 0), + BANK_DS("H", GPIOH_0, GPIOH_8, 28, 36, + 3, 0, 3, 0, 9, 0, 10, 0, 11, 0, 4, 0), + BANK_DS("BOOT", BOOT_0, BOOT_15, 37, 52, + 0, 0, 0, 0, 0, 0, 1, 0, 2, 0, 0, 0), + BANK_DS("C", GPIOC_0, GPIOC_7, 53, 60, + 1, 0, 1, 0, 3, 0, 4, 0, 5, 0, 1, 0), + BANK_DS("A", GPIOA_0, GPIOA_15, 61, 76, + 5, 0, 5, 0, 16, 0, 17, 0, 18, 0, 6, 0), + BANK_DS("X", GPIOX_0, GPIOX_19, 77, 96, + 2, 0, 2, 0, 6, 0, 7, 0, 8, 0, 2, 0), }; static struct meson_bank meson_g12a_aobus_banks[] = { - /* name first last irq pullen pull dir out in */ - BANK("AO", GPIOAO_0, GPIOAO_11, 0, 11, - 3, 0, 2, 0, 0, 0, 4, 0, 1, 0), + /* name first last irq pullen pull dir out in ds */ + BANK_DS("AO", GPIOAO_0, GPIOAO_11, 0, 11, 3, 0, 2, 0, 0, 0, 4, 0, 1, 0, + 0, 0), /* GPIOE actually located in the AO bank */ - BANK("E", GPIOE_0, GPIOE_2, 97, 99, - 3, 16, 2, 16, 0, 16, 4, 16, 1, 16), + BANK_DS("E", GPIOE_0, GPIOE_2, 97, 99, 3, 16, 2, 16, 0, 16, 4, 16, 1, + 16, 1, 0), }; static struct meson_pmx_bank meson_g12a_periphs_pmx_banks[] = { -- 2.17.1 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-05-10 8:23 UTC|newest] Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-05-10 8:23 [PATCH v5 0/6] Add drive-strength in Meson pinctrl driver Guillaume La Roque 2019-05-10 8:23 ` Guillaume La Roque 2019-05-10 8:23 ` [PATCH v5 1/6] dt-bindings: pinctrl: add a 'drive-strength-microamp' property Guillaume La Roque 2019-05-10 8:23 ` Guillaume La Roque 2019-05-11 16:20 ` Martin Blumenstingl 2019-05-11 16:20 ` Martin Blumenstingl 2019-05-13 15:24 ` Rob Herring 2019-05-13 15:24 ` Rob Herring 2019-05-10 8:23 ` [PATCH v5 2/6] pinctrl: generic: add new 'drive-strength-microamp' property support Guillaume La Roque 2019-05-10 8:23 ` Guillaume La Roque 2019-05-10 8:23 ` [PATCH v5 3/6] dt-bindings: pinctrl: meson: Add drive-strength-microamp property Guillaume La Roque 2019-05-10 8:23 ` Guillaume La Roque 2019-05-11 16:20 ` Martin Blumenstingl 2019-05-11 16:20 ` Martin Blumenstingl 2019-05-13 15:25 ` Rob Herring 2019-05-13 15:25 ` Rob Herring 2019-05-10 8:23 ` [PATCH v5 4/6] pinctrl: meson: Rework enable/disable bias part Guillaume La Roque 2019-05-10 8:23 ` Guillaume La Roque 2019-05-11 16:29 ` Martin Blumenstingl 2019-05-11 16:29 ` Martin Blumenstingl 2019-05-10 8:23 ` [PATCH v5 5/6] pinctrl: meson: add support of drive-strength-microamp Guillaume La Roque 2019-05-10 8:23 ` Guillaume La Roque 2019-05-11 16:46 ` Martin Blumenstingl 2019-05-11 16:46 ` Martin Blumenstingl 2019-05-10 8:23 ` Guillaume La Roque [this message] 2019-05-10 8:23 ` [PATCH v5 6/6] pinctrl: meson: g12a: add DS bank value Guillaume La Roque 2019-05-11 16:30 ` Martin Blumenstingl 2019-05-11 16:30 ` Martin Blumenstingl 2019-05-10 8:52 ` [PATCH v5 0/6] Add drive-strength in Meson pinctrl driver Jerome Brunet 2019-05-10 8:52 ` Jerome Brunet
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190510082324.21181-7-glaroque@baylibre.com \ --to=glaroque@baylibre.com \ --cc=devicetree@vger.kernel.org \ --cc=jbrunet@baylibre.com \ --cc=khilman@baylibre.com \ --cc=linus.walleij@linaro.org \ --cc=linux-amlogic@lists.infradead.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.