All of lore.kernel.org
 help / color / mirror / Atom feed
From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, Palmer Dabbelt <palmer@sifive.com>,
	qemu-riscv@nongnu.org
Subject: [Qemu-devel] [PULL v2 17/27] target/riscv: Convert to CPUClass::tlb_fill
Date: Fri, 10 May 2019 11:54:36 -0700	[thread overview]
Message-ID: <20190510185438.29533-6-richard.henderson@linaro.org> (raw)
In-Reply-To: <20190510185438.29533-1-richard.henderson@linaro.org>

Note that env->pc is removed from the qemu_log as that value is garbage.
The PC isn't recovered until cpu_restore_state, called from
cpu_loop_exit_restore, called from riscv_raise_exception.

Cc: qemu-riscv@nongnu.org
Cc: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
 target/riscv/cpu.h        |  5 +++--
 target/riscv/cpu.c        |  5 ++---
 target/riscv/cpu_helper.c | 46 ++++++++++++++++++---------------------
 3 files changed, 26 insertions(+), 30 deletions(-)

diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
index 7d9f48973f..c17184f4e4 100644
--- a/target/riscv/cpu.h
+++ b/target/riscv/cpu.h
@@ -261,8 +261,9 @@ hwaddr riscv_cpu_get_phys_page_debug(CPUState *cpu, vaddr addr);
 void  riscv_cpu_do_unaligned_access(CPUState *cs, vaddr addr,
                                     MMUAccessType access_type, int mmu_idx,
                                     uintptr_t retaddr);
-int riscv_cpu_handle_mmu_fault(CPUState *cpu, vaddr address, int size,
-                              int rw, int mmu_idx);
+bool riscv_cpu_tlb_fill(CPUState *cs, vaddr address, int size,
+                        MMUAccessType access_type, int mmu_idx,
+                        bool probe, uintptr_t retaddr);
 char *riscv_isa_string(RISCVCPU *cpu);
 void riscv_cpu_list(void);
 
diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index 1bcf4eaeb8..b7675707e0 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -355,14 +355,13 @@ static void riscv_cpu_class_init(ObjectClass *c, void *data)
 #endif
     cc->gdb_stop_before_watchpoint = true;
     cc->disas_set_info = riscv_cpu_disas_set_info;
-#ifdef CONFIG_USER_ONLY
-    cc->handle_mmu_fault = riscv_cpu_handle_mmu_fault;
-#else
+#ifndef CONFIG_USER_ONLY
     cc->do_unaligned_access = riscv_cpu_do_unaligned_access;
     cc->get_phys_page_debug = riscv_cpu_get_phys_page_debug;
 #endif
 #ifdef CONFIG_TCG
     cc->tcg_initialize = riscv_translate_init;
+    cc->tlb_fill = riscv_cpu_tlb_fill;
 #endif
     /* For now, mark unmigratable: */
     cc->vmsd = &vmstate_riscv_cpu;
diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c
index b17f169681..2535435260 100644
--- a/target/riscv/cpu_helper.c
+++ b/target/riscv/cpu_helper.c
@@ -379,53 +379,49 @@ void riscv_cpu_do_unaligned_access(CPUState *cs, vaddr addr,
     riscv_raise_exception(env, cs->exception_index, retaddr);
 }
 
-/* called by qemu's softmmu to fill the qemu tlb */
 void tlb_fill(CPUState *cs, target_ulong addr, int size,
         MMUAccessType access_type, int mmu_idx, uintptr_t retaddr)
 {
-    int ret;
-    ret = riscv_cpu_handle_mmu_fault(cs, addr, size, access_type, mmu_idx);
-    if (ret == TRANSLATE_FAIL) {
-        RISCVCPU *cpu = RISCV_CPU(cs);
-        CPURISCVState *env = &cpu->env;
-        riscv_raise_exception(env, cs->exception_index, retaddr);
-    }
+    riscv_cpu_tlb_fill(cs, addr, size, access_type, mmu_idx, false, retaddr);
 }
-
 #endif
 
-int riscv_cpu_handle_mmu_fault(CPUState *cs, vaddr address, int size,
-        int rw, int mmu_idx)
+bool riscv_cpu_tlb_fill(CPUState *cs, vaddr address, int size,
+                        MMUAccessType access_type, int mmu_idx,
+                        bool probe, uintptr_t retaddr)
 {
+#ifndef CONFIG_USER_ONLY
     RISCVCPU *cpu = RISCV_CPU(cs);
     CPURISCVState *env = &cpu->env;
-#if !defined(CONFIG_USER_ONLY)
     hwaddr pa = 0;
     int prot;
-#endif
     int ret = TRANSLATE_FAIL;
 
-    qemu_log_mask(CPU_LOG_MMU,
-            "%s pc " TARGET_FMT_lx " ad %" VADDR_PRIx " rw %d mmu_idx \
-             %d\n", __func__, env->pc, address, rw, mmu_idx);
+    qemu_log_mask(CPU_LOG_MMU, "%s ad %" VADDR_PRIx " rw %d mmu_idx %d\n",
+                  __func__, address, access_type, mmu_idx);
+
+    ret = get_physical_address(env, &pa, &prot, address, access_type, mmu_idx);
 
-#if !defined(CONFIG_USER_ONLY)
-    ret = get_physical_address(env, &pa, &prot, address, rw, mmu_idx);
     qemu_log_mask(CPU_LOG_MMU,
-            "%s address=%" VADDR_PRIx " ret %d physical " TARGET_FMT_plx
-             " prot %d\n", __func__, address, ret, pa, prot);
+                  "%s address=%" VADDR_PRIx " ret %d physical " TARGET_FMT_plx
+                  " prot %d\n", __func__, address, ret, pa, prot);
+
     if (riscv_feature(env, RISCV_FEATURE_PMP) &&
-        !pmp_hart_has_privs(env, pa, TARGET_PAGE_SIZE, 1 << rw)) {
+        !pmp_hart_has_privs(env, pa, TARGET_PAGE_SIZE, 1 << access_type)) {
         ret = TRANSLATE_FAIL;
     }
     if (ret == TRANSLATE_SUCCESS) {
         tlb_set_page(cs, address & TARGET_PAGE_MASK, pa & TARGET_PAGE_MASK,
                      prot, mmu_idx, TARGET_PAGE_SIZE);
-    } else if (ret == TRANSLATE_FAIL) {
-        raise_mmu_exception(env, address, rw);
+        return true;
+    } else if (probe) {
+        return false;
+    } else {
+        raise_mmu_exception(env, address, access_type);
+        riscv_raise_exception(env, cs->exception_index, retaddr);
     }
 #else
-    switch (rw) {
+    switch (access_type) {
     case MMU_INST_FETCH:
         cs->exception_index = RISCV_EXCP_INST_PAGE_FAULT;
         break;
@@ -436,8 +432,8 @@ int riscv_cpu_handle_mmu_fault(CPUState *cs, vaddr address, int size,
         cs->exception_index = RISCV_EXCP_STORE_PAGE_FAULT;
         break;
     }
+    cpu_loop_exit_restore(cs, retaddr);
 #endif
-    return ret;
 }
 
 /*
-- 
2.17.1



WARNING: multiple messages have this Message-ID (diff)
From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, qemu-riscv@nongnu.org,
	Palmer Dabbelt <palmer@sifive.com>
Subject: [Qemu-riscv] [PULL v2 17/27] target/riscv: Convert to CPUClass::tlb_fill
Date: Fri, 10 May 2019 11:54:36 -0700	[thread overview]
Message-ID: <20190510185438.29533-6-richard.henderson@linaro.org> (raw)
In-Reply-To: <20190510185438.29533-1-richard.henderson@linaro.org>

Note that env->pc is removed from the qemu_log as that value is garbage.
The PC isn't recovered until cpu_restore_state, called from
cpu_loop_exit_restore, called from riscv_raise_exception.

Cc: qemu-riscv@nongnu.org
Cc: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
 target/riscv/cpu.h        |  5 +++--
 target/riscv/cpu.c        |  5 ++---
 target/riscv/cpu_helper.c | 46 ++++++++++++++++++---------------------
 3 files changed, 26 insertions(+), 30 deletions(-)

diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
index 7d9f48973f..c17184f4e4 100644
--- a/target/riscv/cpu.h
+++ b/target/riscv/cpu.h
@@ -261,8 +261,9 @@ hwaddr riscv_cpu_get_phys_page_debug(CPUState *cpu, vaddr addr);
 void  riscv_cpu_do_unaligned_access(CPUState *cs, vaddr addr,
                                     MMUAccessType access_type, int mmu_idx,
                                     uintptr_t retaddr);
-int riscv_cpu_handle_mmu_fault(CPUState *cpu, vaddr address, int size,
-                              int rw, int mmu_idx);
+bool riscv_cpu_tlb_fill(CPUState *cs, vaddr address, int size,
+                        MMUAccessType access_type, int mmu_idx,
+                        bool probe, uintptr_t retaddr);
 char *riscv_isa_string(RISCVCPU *cpu);
 void riscv_cpu_list(void);
 
diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index 1bcf4eaeb8..b7675707e0 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -355,14 +355,13 @@ static void riscv_cpu_class_init(ObjectClass *c, void *data)
 #endif
     cc->gdb_stop_before_watchpoint = true;
     cc->disas_set_info = riscv_cpu_disas_set_info;
-#ifdef CONFIG_USER_ONLY
-    cc->handle_mmu_fault = riscv_cpu_handle_mmu_fault;
-#else
+#ifndef CONFIG_USER_ONLY
     cc->do_unaligned_access = riscv_cpu_do_unaligned_access;
     cc->get_phys_page_debug = riscv_cpu_get_phys_page_debug;
 #endif
 #ifdef CONFIG_TCG
     cc->tcg_initialize = riscv_translate_init;
+    cc->tlb_fill = riscv_cpu_tlb_fill;
 #endif
     /* For now, mark unmigratable: */
     cc->vmsd = &vmstate_riscv_cpu;
diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c
index b17f169681..2535435260 100644
--- a/target/riscv/cpu_helper.c
+++ b/target/riscv/cpu_helper.c
@@ -379,53 +379,49 @@ void riscv_cpu_do_unaligned_access(CPUState *cs, vaddr addr,
     riscv_raise_exception(env, cs->exception_index, retaddr);
 }
 
-/* called by qemu's softmmu to fill the qemu tlb */
 void tlb_fill(CPUState *cs, target_ulong addr, int size,
         MMUAccessType access_type, int mmu_idx, uintptr_t retaddr)
 {
-    int ret;
-    ret = riscv_cpu_handle_mmu_fault(cs, addr, size, access_type, mmu_idx);
-    if (ret == TRANSLATE_FAIL) {
-        RISCVCPU *cpu = RISCV_CPU(cs);
-        CPURISCVState *env = &cpu->env;
-        riscv_raise_exception(env, cs->exception_index, retaddr);
-    }
+    riscv_cpu_tlb_fill(cs, addr, size, access_type, mmu_idx, false, retaddr);
 }
-
 #endif
 
-int riscv_cpu_handle_mmu_fault(CPUState *cs, vaddr address, int size,
-        int rw, int mmu_idx)
+bool riscv_cpu_tlb_fill(CPUState *cs, vaddr address, int size,
+                        MMUAccessType access_type, int mmu_idx,
+                        bool probe, uintptr_t retaddr)
 {
+#ifndef CONFIG_USER_ONLY
     RISCVCPU *cpu = RISCV_CPU(cs);
     CPURISCVState *env = &cpu->env;
-#if !defined(CONFIG_USER_ONLY)
     hwaddr pa = 0;
     int prot;
-#endif
     int ret = TRANSLATE_FAIL;
 
-    qemu_log_mask(CPU_LOG_MMU,
-            "%s pc " TARGET_FMT_lx " ad %" VADDR_PRIx " rw %d mmu_idx \
-             %d\n", __func__, env->pc, address, rw, mmu_idx);
+    qemu_log_mask(CPU_LOG_MMU, "%s ad %" VADDR_PRIx " rw %d mmu_idx %d\n",
+                  __func__, address, access_type, mmu_idx);
+
+    ret = get_physical_address(env, &pa, &prot, address, access_type, mmu_idx);
 
-#if !defined(CONFIG_USER_ONLY)
-    ret = get_physical_address(env, &pa, &prot, address, rw, mmu_idx);
     qemu_log_mask(CPU_LOG_MMU,
-            "%s address=%" VADDR_PRIx " ret %d physical " TARGET_FMT_plx
-             " prot %d\n", __func__, address, ret, pa, prot);
+                  "%s address=%" VADDR_PRIx " ret %d physical " TARGET_FMT_plx
+                  " prot %d\n", __func__, address, ret, pa, prot);
+
     if (riscv_feature(env, RISCV_FEATURE_PMP) &&
-        !pmp_hart_has_privs(env, pa, TARGET_PAGE_SIZE, 1 << rw)) {
+        !pmp_hart_has_privs(env, pa, TARGET_PAGE_SIZE, 1 << access_type)) {
         ret = TRANSLATE_FAIL;
     }
     if (ret == TRANSLATE_SUCCESS) {
         tlb_set_page(cs, address & TARGET_PAGE_MASK, pa & TARGET_PAGE_MASK,
                      prot, mmu_idx, TARGET_PAGE_SIZE);
-    } else if (ret == TRANSLATE_FAIL) {
-        raise_mmu_exception(env, address, rw);
+        return true;
+    } else if (probe) {
+        return false;
+    } else {
+        raise_mmu_exception(env, address, access_type);
+        riscv_raise_exception(env, cs->exception_index, retaddr);
     }
 #else
-    switch (rw) {
+    switch (access_type) {
     case MMU_INST_FETCH:
         cs->exception_index = RISCV_EXCP_INST_PAGE_FAULT;
         break;
@@ -436,8 +432,8 @@ int riscv_cpu_handle_mmu_fault(CPUState *cs, vaddr address, int size,
         cs->exception_index = RISCV_EXCP_STORE_PAGE_FAULT;
         break;
     }
+    cpu_loop_exit_restore(cs, retaddr);
 #endif
-    return ret;
 }
 
 /*
-- 
2.17.1



  parent reply	other threads:[~2019-05-10 19:01 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-10 18:54 [Qemu-devel] [PULL v2 00/27] tcg: Add CPUClass::tlb_fill Richard Henderson
2019-05-10 18:54 ` [Qemu-devel] [PULL v2 03/27] target/arm: Convert to CPUClass::tlb_fill Richard Henderson
2019-05-10 18:54 ` [Qemu-devel] [PULL v2 06/27] target/i386: " Richard Henderson
2019-05-10 18:54 ` [Qemu-devel] [PULL v2 12/27] target/mips: " Richard Henderson
2019-05-11 13:43   ` Aleksandar Markovic
2019-05-14 15:25     ` Peter Maydell
2019-05-14 16:05       ` Aleksandar Markovic
2019-05-14 16:22         ` Peter Maydell
2019-05-14 15:48     ` Alex Bennée
2019-05-14 16:13       ` Philippe Mathieu-Daudé
2019-05-14 16:28         ` Alex Bennée
2019-05-10 18:54 ` [Qemu-devel] [PULL v2 16/27] target/ppc: " Richard Henderson
2019-05-10 18:54 ` Richard Henderson [this message]
2019-05-10 18:54   ` [Qemu-riscv] [PULL v2 17/27] target/riscv: " Richard Henderson
2019-05-10 18:54 ` [Qemu-devel] [PULL v2 18/27] target/s390x: " Richard Henderson
2019-05-10 18:54 ` [Qemu-devel] [PULL v2 27/27] tcg: Use tlb_fill probe from tlb_vaddr_to_host Richard Henderson
2019-05-11 19:26 ` [Qemu-devel] [PULL v2 00/27] tcg: Add CPUClass::tlb_fill Aleksandar Markovic
2019-05-14 12:36 ` Peter Maydell
2019-05-16 15:56   ` Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190510185438.29533-6-richard.henderson@linaro.org \
    --to=richard.henderson@linaro.org \
    --cc=palmer@sifive.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-riscv@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.