From: Jerome Brunet <jbrunet@baylibre.com> To: Kevin Hilman <khilman@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com>, devicetree@vger.kernel.org, linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 5/8] arm64: dts: meson: g12a: add spdifouts Date: Tue, 14 May 2019 16:26:46 +0200 [thread overview] Message-ID: <20190514142649.1127-6-jbrunet@baylibre.com> (raw) In-Reply-To: <20190514142649.1127-1-jbrunet@baylibre.com> Add the devices nodes and pinctrl definitions for the spdif outputs of the g12a SoC family Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 60 +++++++++++++++++++++ 1 file changed, 60 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi index 40a82ddda79f..f25a7c7ed995 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -643,6 +643,33 @@ }; }; + spdif_out_h_pins: spdif-out-h { + mux { + groups = "spdif_out_h"; + function = "spdif_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + + spdif_out_a11_pins: spdif-out-a11 { + mux { + groups = "spdif_out_a11"; + function = "spdif_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + + spdif_out_a13_pins: spdif-out-a13 { + mux { + groups = "spdif_out_a13"; + function = "spdif_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + tdm_a_din0_pins: tdm-a-din0 { mux { groups = "tdm_a_din0"; @@ -1312,6 +1339,18 @@ status = "disabled"; }; + spdifout: audio-controller@480 { + compatible = "amlogic,g12a-spdifout", + "amlogic,axg-spdifout"; + reg = <0x0 0x480 0x0 0x50>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFOUT"; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, + <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; + clock-names = "pclk", "mclk"; + status = "disabled"; + }; + tdmout_a: audio-controller@500 { compatible = "amlogic,g12a-tdmout"; reg = <0x0 0x500 0x0 0x40>; @@ -1353,6 +1392,18 @@ "lrclk", "lrclk_sel"; status = "disabled"; }; + + spdifout_b: audio-controller@680 { + compatible = "amlogic,g12a-spdifout", + "amlogic,axg-spdifout"; + reg = <0x0 0x680 0x0 0x50>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFOUT_B"; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>, + <&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>; + clock-names = "pclk", "mclk"; + status = "disabled"; + }; }; usb3_pcie_phy: phy@46000 { @@ -1506,6 +1557,15 @@ }; }; + spdif_ao_out_pins: spdif-ao-out { + mux { + groups = "spdif_ao_out"; + function = "spdif_ao_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + tdm_ao_b_din1_pins: tdm-ao-b-din1 { mux { groups = "tdm_ao_b_din1"; -- 2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Jerome Brunet <jbrunet@baylibre.com> To: Kevin Hilman <khilman@baylibre.com> Cc: devicetree@vger.kernel.org, linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org, Jerome Brunet <jbrunet@baylibre.com> Subject: [PATCH v2 5/8] arm64: dts: meson: g12a: add spdifouts Date: Tue, 14 May 2019 16:26:46 +0200 [thread overview] Message-ID: <20190514142649.1127-6-jbrunet@baylibre.com> (raw) In-Reply-To: <20190514142649.1127-1-jbrunet@baylibre.com> Add the devices nodes and pinctrl definitions for the spdif outputs of the g12a SoC family Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 60 +++++++++++++++++++++ 1 file changed, 60 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi index 40a82ddda79f..f25a7c7ed995 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -643,6 +643,33 @@ }; }; + spdif_out_h_pins: spdif-out-h { + mux { + groups = "spdif_out_h"; + function = "spdif_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + + spdif_out_a11_pins: spdif-out-a11 { + mux { + groups = "spdif_out_a11"; + function = "spdif_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + + spdif_out_a13_pins: spdif-out-a13 { + mux { + groups = "spdif_out_a13"; + function = "spdif_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + tdm_a_din0_pins: tdm-a-din0 { mux { groups = "tdm_a_din0"; @@ -1312,6 +1339,18 @@ status = "disabled"; }; + spdifout: audio-controller@480 { + compatible = "amlogic,g12a-spdifout", + "amlogic,axg-spdifout"; + reg = <0x0 0x480 0x0 0x50>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFOUT"; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, + <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; + clock-names = "pclk", "mclk"; + status = "disabled"; + }; + tdmout_a: audio-controller@500 { compatible = "amlogic,g12a-tdmout"; reg = <0x0 0x500 0x0 0x40>; @@ -1353,6 +1392,18 @@ "lrclk", "lrclk_sel"; status = "disabled"; }; + + spdifout_b: audio-controller@680 { + compatible = "amlogic,g12a-spdifout", + "amlogic,axg-spdifout"; + reg = <0x0 0x680 0x0 0x50>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFOUT_B"; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>, + <&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>; + clock-names = "pclk", "mclk"; + status = "disabled"; + }; }; usb3_pcie_phy: phy@46000 { @@ -1506,6 +1557,15 @@ }; }; + spdif_ao_out_pins: spdif-ao-out { + mux { + groups = "spdif_ao_out"; + function = "spdif_ao_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + tdm_ao_b_din1_pins: tdm-ao-b-din1 { mux { groups = "tdm_ao_b_din1"; -- 2.20.1 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-05-14 14:27 UTC|newest] Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-05-14 14:26 [PATCH v2 0/8] arm64: dts: meson: g12a: add audio devices Jerome Brunet 2019-05-14 14:26 ` Jerome Brunet 2019-05-14 14:26 ` [PATCH v2 1/8] arm64: dts: meson: g12a: add audio clock controller Jerome Brunet 2019-05-14 14:26 ` Jerome Brunet 2019-05-14 14:26 ` [PATCH v2 2/8] arm64: dts: meson: g12a: add audio memory arbitrer Jerome Brunet 2019-05-14 14:26 ` Jerome Brunet 2019-05-14 14:26 ` [PATCH v2 3/8] arm64: dts: meson: g12a: add audio fifos Jerome Brunet 2019-05-14 14:26 ` Jerome Brunet 2019-05-14 14:26 ` [PATCH v2 4/8] arm64: dts: meson: g12a: add tdm Jerome Brunet 2019-05-14 14:26 ` Jerome Brunet 2019-05-14 14:26 ` Jerome Brunet [this message] 2019-05-14 14:26 ` [PATCH v2 5/8] arm64: dts: meson: g12a: add spdifouts Jerome Brunet 2019-05-14 14:26 ` [PATCH v2 6/8] arm64: dts: meson: g12a: add pdm Jerome Brunet 2019-05-14 14:26 ` Jerome Brunet 2019-05-14 14:26 ` [PATCH v2 7/8] arm64: dts: meson: g12a: add spdifin Jerome Brunet 2019-05-14 14:26 ` Jerome Brunet 2019-05-14 14:26 ` [PATCH v2 8/8] arm64: dts: meson: g12a: enable hdmi_tx sound dai provider Jerome Brunet 2019-05-14 14:26 ` Jerome Brunet 2019-05-20 21:16 ` [PATCH v2 0/8] arm64: dts: meson: g12a: add audio devices Kevin Hilman 2019-05-20 21:16 ` Kevin Hilman 2019-05-20 21:16 ` Kevin Hilman
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190514142649.1127-6-jbrunet@baylibre.com \ --to=jbrunet@baylibre.com \ --cc=devicetree@vger.kernel.org \ --cc=khilman@baylibre.com \ --cc=linux-amlogic@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.