[REPOST PATCH v2 0/3] USB: dwc2: Allow wakeup from suspend; enable for rk3288-veyron

[REPOST PATCH v2 0/3] USB: dwc2: Allow wakeup from suspend; enable for rk3288-veyron

[Douglas Anderson]

This is a re-post of the last 3 patches of a series I posted earlier
at:
  https://lkml.kernel.org/r/20190418001356.124334-1-dianders@chromium.org

The first two patches were applied but the last three weren't because
they didn't apply at the time.  They apply fine now so are ready to
land.

Changes in v2:
- Rebased to mainline atop rk3288 remote wake quirk series.
- rk3288-veyron dts patch new for v2.

Douglas Anderson (3):
  Documentation: dt-bindings: Add snps,need-phy-for-wake for dwc2 USB
  USB: dwc2: Don't turn off the usbphy in suspend if wakeup is enabled
  ARM: dts: rockchip: Allow wakeup from rk3288-veyron's dwc2 USB ports

 .../devicetree/bindings/usb/dwc2.txt          |  3 ++
 arch/arm/boot/dts/rk3288-veyron.dtsi          |  2 +
 drivers/usb/dwc2/core.h                       |  5 +++
 drivers/usb/dwc2/platform.c                   | 43 ++++++++++++++++++-
 4 files changed, 51 insertions(+), 2 deletions(-)

-- 
2.21.0.1020.gf2820cf01a-goog

[REPOST PATCH v2 0/3] USB: dwc2: Allow wakeup from suspend; enable for rk3288-veyron

[Douglas Anderson]

This is a re-post of the last 3 patches of a series I posted earlier
at:
  https://lkml.kernel.org/r/20190418001356.124334-1-dianders@chromium.org

The first two patches were applied but the last three weren't because
they didn't apply at the time.  They apply fine now so are ready to
land.

Changes in v2:
- Rebased to mainline atop rk3288 remote wake quirk series.
- rk3288-veyron dts patch new for v2.

Douglas Anderson (3):
  Documentation: dt-bindings: Add snps,need-phy-for-wake for dwc2 USB
  USB: dwc2: Don't turn off the usbphy in suspend if wakeup is enabled
  ARM: dts: rockchip: Allow wakeup from rk3288-veyron's dwc2 USB ports

 .../devicetree/bindings/usb/dwc2.txt          |  3 ++
 arch/arm/boot/dts/rk3288-veyron.dtsi          |  2 +
 drivers/usb/dwc2/core.h                       |  5 +++
 drivers/usb/dwc2/platform.c                   | 43 ++++++++++++++++++-
 4 files changed, 51 insertions(+), 2 deletions(-)

-- 
2.21.0.1020.gf2820cf01a-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[REPOST PATCH v2 1/3] Documentation: dt-bindings: Add snps,need-phy-for-wake for dwc2 USB

[Douglas Anderson]

Some SoCs with a dwc2 USB controller may need to keep the PHY on to
support remote wakeup.  Allow specifying this as a device tree
property.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
---
For relevant prior discussion on this patch, see:

https://lkml.kernel.org/r/1435017144-2971-3-git-send-email-dianders@chromium.org

I didn't make any changes from the prior version since I never found
out what Rob thought of my previous arguments.  If folks want a
change, perhaps they could choose from these options:

1. Assume that all dwc2 hosts would like to keep their PHY on for
   suspend if there's a USB wakeup enabled, thus we totally drop this
   binding.  This doesn't seem super great to me since I'd bet that
   many devices that use dwc2 weren't designed for USB wakeup (they
   may not keep enough clocks or rails on) so we might be wasting
   power for nothing.
2. Rename this property to "snps,wakeup-from-suspend-with-phy" to make
   it more obvious that this property is intended both to document
   that wakeup from suspend is possible and that we need the PHY for
   said wakeup.
3. Rename this property to "snps,can-wakeup-from-suspend" and assume
   it's implicit that if we can wakeup from suspend that we need to
   keep the PHY on.  If/when someone shows that a device exists using
   dwc2 where we can wakeup from suspend without the PHY they can add
   a new property.

NOTE FOR REPOST:
- In v2 Rob said [1] he'd prefer something based on the SoC
  compatibility string, but that doesn't work because not all boards
  will have the regulator setup / board design / suspend logic
  necessary to make this work.

[1] https://lkml.kernel.org/r/20190430012328.GA25660@bogus


Changes in v2: None

 Documentation/devicetree/bindings/usb/dwc2.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
index 49eac0dc86b0..aafff3a6904d 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.txt
+++ b/Documentation/devicetree/bindings/usb/dwc2.txt
@@ -42,6 +42,8 @@ Refer to phy/phy-bindings.txt for generic phy consumer properties
 - g-rx-fifo-size: size of rx fifo size in gadget mode.
 - g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode.
 - g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
+- snps,need-phy-for-wake: If present indicates that the phy needs to be left
+                          on for remote wakeup during suspend.
 - snps,reset-phy-on-wake: If present indicates that we need to reset the PHY when
                           we detect a wakeup.  This is due to a hardware errata.
 
@@ -58,4 +60,5 @@ Example:
 		clock-names = "otg";
 		phys = <&usbphy>;
 		phy-names = "usb2-phy";
+		snps,need-phy-for-wake;
         };
-- 
2.21.0.1020.gf2820cf01a-goog

[REPOST PATCH v2 2/3] USB: dwc2: Don't turn off the usbphy in suspend if wakeup is enabled

[Douglas Anderson]

If the 'snps,need-phy-for-wake' is set in the device tree then:

- We know that we can wakeup, so call device_set_wakeup_capable().
  The USB core will use this knowledge to enable wakeup by default.
- We know that we should keep the PHY on during suspend if something
  on our root hub needs remote wakeup.  This requires the patch (USB:
  Export usb_wakeup_enabled_descendants()).  Note that we don't keep
  the PHY on at suspend time if it's not needed because it would be a
  power draw.

If we later find some users of dwc2 that can support wakeup without
keeping the PHY on we may want to add a way to call
device_set_wakeup_capable() without keeping the PHY on at suspend
time.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---
For relevant prior discussion of this idea, see:

https://lkml.kernel.org/r/1436207224-21849-4-git-send-email-dianders@chromium.org

If I'm reading all the responses correctly folks were of the opinion
that this patch is still the right way to go.

Changes in v2:
- Rebased to mainline atop rk3288 remote wake quirk series.

 drivers/usb/dwc2/core.h     |  5 +++++
 drivers/usb/dwc2/platform.c | 43 +++++++++++++++++++++++++++++++++++--
 2 files changed, 46 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 152ac41dfb2d..73c1e998f27a 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -861,6 +861,9 @@ struct dwc2_hregs_backup {
  * @hibernated:		True if core is hibernated
  * @reset_phy_on_wake:	Quirk saying that we should assert PHY reset on a
  *			remote wakeup.
+ * @phy_off_for_suspend: Status of whether we turned the PHY off at suspend.
+ * @need_phy_for_wake:	Quirk saying that we should keep the PHY on at
+ *			suspend if we need USB to wake us up.
  * @frame_number:       Frame number read from the core. For both device
  *			and host modes. The value ranges are from 0
  *			to HFNUM_MAX_FRNUM.
@@ -1049,6 +1052,8 @@ struct dwc2_hsotg {
 	unsigned int ll_hw_enabled:1;
 	unsigned int hibernated:1;
 	unsigned int reset_phy_on_wake:1;
+	unsigned int need_phy_for_wake:1;
+	unsigned int phy_off_for_suspend:1;
 	u16 frame_number;
 
 	struct phy *phy;
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index d10a7f8daec3..31be644d1273 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -47,7 +47,9 @@
 #include <linux/phy/phy.h>
 #include <linux/platform_data/s3c-hsotg.h>
 #include <linux/reset.h>
+#include <linux/usb.h>
 
+#include <linux/usb/hcd.h>
 #include <linux/usb/of.h>
 
 #include "core.h"
@@ -447,6 +449,10 @@ static int dwc2_driver_probe(struct platform_device *dev)
 	if (retval)
 		goto error;
 
+	hsotg->need_phy_for_wake =
+		of_property_read_bool(dev->dev.of_node,
+				      "snps,need-phy-for-wake");
+
 	/*
 	 * Reset before dwc2_get_hwparams() then it could get power-on real
 	 * reset value form registers.
@@ -478,6 +484,14 @@ static int dwc2_driver_probe(struct platform_device *dev)
 		hsotg->gadget_enabled = 1;
 	}
 
+	/*
+	 * If we need PHY for wakeup we must be wakeup capable.
+	 * When we have a device that can wake without the PHY we
+	 * can adjust this condition.
+	 */
+	if (hsotg->need_phy_for_wake)
+		device_set_wakeup_capable(&dev->dev, true);
+
 	hsotg->reset_phy_on_wake =
 		of_property_read_bool(dev->dev.of_node,
 				      "snps,reset-phy-on-wake");
@@ -513,6 +527,28 @@ static int dwc2_driver_probe(struct platform_device *dev)
 	return retval;
 }
 
+static bool __maybe_unused dwc2_can_poweroff_phy(struct dwc2_hsotg *dwc2)
+{
+	struct usb_device *root_hub = dwc2_hsotg_to_hcd(dwc2)->self.root_hub;
+
+	if (!dwc2->ll_hw_enabled)
+		return false;
+
+	/* If the controller isn't allowed to wakeup then we can power off. */
+	if (!device_may_wakeup(dwc2->dev))
+		return true;
+
+	/*
+	 * We don't want to power off the PHY if something under the
+	 * root hub has wakeup enabled.
+	 */
+	if (usb_wakeup_enabled_descendants(root_hub))
+		return false;
+
+	/* No reason to keep the PHY powered, so allow poweroff */
+	return true;
+}
+
 static int __maybe_unused dwc2_suspend(struct device *dev)
 {
 	struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
@@ -521,8 +557,10 @@ static int __maybe_unused dwc2_suspend(struct device *dev)
 	if (dwc2_is_device_mode(dwc2))
 		dwc2_hsotg_suspend(dwc2);
 
-	if (dwc2->ll_hw_enabled)
+	if (dwc2_can_poweroff_phy(dwc2)) {
 		ret = __dwc2_lowlevel_hw_disable(dwc2);
+		dwc2->phy_off_for_suspend = true;
+	}
 
 	return ret;
 }
@@ -532,11 +570,12 @@ static int __maybe_unused dwc2_resume(struct device *dev)
 	struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
 	int ret = 0;
 
-	if (dwc2->ll_hw_enabled) {
+	if (dwc2->phy_off_for_suspend && dwc2->ll_hw_enabled) {
 		ret = __dwc2_lowlevel_hw_enable(dwc2);
 		if (ret)
 			return ret;
 	}
+	dwc2->phy_off_for_suspend = false;
 
 	if (dwc2_is_device_mode(dwc2))
 		ret = dwc2_hsotg_resume(dwc2);
-- 
2.21.0.1020.gf2820cf01a-goog

[REPOST PATCH v2 3/3] ARM: dts: rockchip: Allow wakeup from rk3288-veyron's dwc2 USB ports

[Douglas Anderson]

We want to be able to wake from USB if a device is plugged in that
wants remote wakeup.  Enable it on both dwc2 controllers.

NOTE: this is added specifically to veyron and not to rk3288 in
general since it's not known whether all rk3288 boards are designed to
support USB wakeup.  It is plausible that some boards could shut down
important rails in S3.

Also note that currently wakeup doesn't seem to happen unless you use
the "deep" suspend mode (where SDRAM is turned off).  Presumably the
shallow suspend mode is gating some sort of clock that's important but
I couldn't easily figure out how to get it working.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

Changes in v2:
- rk3288-veyron dts patch new for v2.

 arch/arm/boot/dts/rk3288-veyron.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 1252522392c7..1d8bfed7830c 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -424,6 +424,7 @@
 
 &usb_host1 {
 	status = "okay";
+	snps,need-phy-for-wake;
 };
 
 &usb_otg {
@@ -432,6 +433,7 @@
 	assigned-clocks = <&cru SCLK_USBPHY480M_SRC>;
 	assigned-clock-parents = <&usbphy0>;
 	dr_mode = "host";
+	snps,need-phy-for-wake;
 };
 
 &vopb {
-- 
2.21.0.1020.gf2820cf01a-goog

[REPOST PATCH v2 3/3] ARM: dts: rockchip: Allow wakeup from rk3288-veyron's dwc2 USB ports

[Douglas Anderson]

We want to be able to wake from USB if a device is plugged in that
wants remote wakeup.  Enable it on both dwc2 controllers.

NOTE: this is added specifically to veyron and not to rk3288 in
general since it's not known whether all rk3288 boards are designed to
support USB wakeup.  It is plausible that some boards could shut down
important rails in S3.

Also note that currently wakeup doesn't seem to happen unless you use
the "deep" suspend mode (where SDRAM is turned off).  Presumably the
shallow suspend mode is gating some sort of clock that's important but
I couldn't easily figure out how to get it working.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

Changes in v2:
- rk3288-veyron dts patch new for v2.

 arch/arm/boot/dts/rk3288-veyron.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 1252522392c7..1d8bfed7830c 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -424,6 +424,7 @@
 
 &usb_host1 {
 	status = "okay";
+	snps,need-phy-for-wake;
 };
 
 &usb_otg {
@@ -432,6 +433,7 @@
 	assigned-clocks = <&cru SCLK_USBPHY480M_SRC>;
 	assigned-clock-parents = <&usbphy0>;
 	dr_mode = "host";
+	snps,need-phy-for-wake;
 };
 
 &vopb {
-- 
2.21.0.1020.gf2820cf01a-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [REPOST PATCH v2 2/3] USB: dwc2: Don't turn off the usbphy in suspend if wakeup is enabled

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1895 bytes --]

Hi Douglas,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on balbi-usb/next]
[also build test ERROR on v5.2-rc1 next-20190517]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Douglas-Anderson/Documentation-dt-bindings-Add-snps-need-phy-for-wake-for-dwc2-USB/20190520-033119
base:   https://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git next
config: x86_64-randconfig-h0-05191510 (attached as .config)
compiler: gcc-7 (Debian 7.3.0-1) 7.3.0
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64 

If you fix the issue, kindly add following tag
Reported-by: kbuild test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   ld: drivers/usb/dwc2/platform.o: in function `dwc2_can_poweroff_phy':
>> drivers/usb/dwc2/platform.c:545: undefined reference to `usb_wakeup_enabled_descendants'

vim +545 drivers/usb/dwc2/platform.c

   529	
   530	static bool __maybe_unused dwc2_can_poweroff_phy(struct dwc2_hsotg *dwc2)
   531	{
   532		struct usb_device *root_hub = dwc2_hsotg_to_hcd(dwc2)->self.root_hub;
   533	
   534		if (!dwc2->ll_hw_enabled)
   535			return false;
   536	
   537		/* If the controller isn't allowed to wakeup then we can power off. */
   538		if (!device_may_wakeup(dwc2->dev))
   539			return true;
   540	
   541		/*
   542		 * We don't want to power off the PHY if something under the
   543		 * root hub has wakeup enabled.
   544		 */
 > 545		if (usb_wakeup_enabled_descendants(root_hub))
   546			return false;
   547	
   548		/* No reason to keep the PHY powered, so allow poweroff */
   549		return true;
   550	}
   551	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 30199 bytes --]

Re: [REPOST PATCH v2 2/3] USB: dwc2: Don't turn off the usbphy in suspend if wakeup is enabled

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1925 bytes --]

Hi Douglas,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on balbi-usb/next]
[also build test ERROR on v5.2-rc1 next-20190517]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Douglas-Anderson/Documentation-dt-bindings-Add-snps-need-phy-for-wake-for-dwc2-USB/20190520-033119
base:   https://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git next
config: x86_64-randconfig-h0-05191510 (attached as .config)
compiler: gcc-7 (Debian 7.3.0-1) 7.3.0
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64 

If you fix the issue, kindly add following tag
Reported-by: kbuild test robot <lkp-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>

All errors (new ones prefixed by >>):

   ld: drivers/usb/dwc2/platform.o: in function `dwc2_can_poweroff_phy':
>> drivers/usb/dwc2/platform.c:545: undefined reference to `usb_wakeup_enabled_descendants'

vim +545 drivers/usb/dwc2/platform.c

   529	
   530	static bool __maybe_unused dwc2_can_poweroff_phy(struct dwc2_hsotg *dwc2)
   531	{
   532		struct usb_device *root_hub = dwc2_hsotg_to_hcd(dwc2)->self.root_hub;
   533	
   534		if (!dwc2->ll_hw_enabled)
   535			return false;
   536	
   537		/* If the controller isn't allowed to wakeup then we can power off. */
   538		if (!device_may_wakeup(dwc2->dev))
   539			return true;
   540	
   541		/*
   542		 * We don't want to power off the PHY if something under the
   543		 * root hub has wakeup enabled.
   544		 */
 > 545		if (usb_wakeup_enabled_descendants(root_hub))
   546			return false;
   547	
   548		/* No reason to keep the PHY powered, so allow poweroff */
   549		return true;
   550	}
   551	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 30199 bytes --]

[-- Attachment #3: Type: text/plain, Size: 200 bytes --]

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [REPOST PATCH v2 2/3] USB: dwc2: Don't turn off the usbphy in suspend if wakeup is enabled

[Doug Anderson]

Hi,

On Sun, May 19, 2019 at 7:08 PM kbuild test robot <lkp@intel.com> wrote:
>
> Hi Douglas,
>
> Thank you for the patch! Yet something to improve:
>
> [auto build test ERROR on balbi-usb/next]
> [also build test ERROR on v5.2-rc1 next-20190517]
> [if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
>
> url:    https://github.com/0day-ci/linux/commits/Douglas-Anderson/Documentation-dt-bindings-Add-snps-need-phy-for-wake-for-dwc2-USB/20190520-033119
> base:   https://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git next
> config: x86_64-randconfig-h0-05191510 (attached as .config)
> compiler: gcc-7 (Debian 7.3.0-1) 7.3.0
> reproduce:
>         # save the attached .config to linux build tree
>         make ARCH=x86_64
>
> If you fix the issue, kindly add following tag
> Reported-by: kbuild test robot <lkp@intel.com>
>
> All errors (new ones prefixed by >>):
>
>    ld: drivers/usb/dwc2/platform.o: in function `dwc2_can_poweroff_phy':
> >> drivers/usb/dwc2/platform.c:545: undefined reference to `usb_wakeup_enabled_descendants'

Thank you.  Fixed in v3:

https://lkml.kernel.org/r/20190520175605.2405-1-dianders@chromium.org

-Doug

Re: [REPOST PATCH v2 2/3] USB: dwc2: Don't turn off the usbphy in suspend if wakeup is enabled

[Doug Anderson]

Hi,

On Sun, May 19, 2019 at 7:08 PM kbuild test robot <lkp@intel.com> wrote:
>
> Hi Douglas,
>
> Thank you for the patch! Yet something to improve:
>
> [auto build test ERROR on balbi-usb/next]
> [also build test ERROR on v5.2-rc1 next-20190517]
> [if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
>
> url:    https://github.com/0day-ci/linux/commits/Douglas-Anderson/Documentation-dt-bindings-Add-snps-need-phy-for-wake-for-dwc2-USB/20190520-033119
> base:   https://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git next
> config: x86_64-randconfig-h0-05191510 (attached as .config)
> compiler: gcc-7 (Debian 7.3.0-1) 7.3.0
> reproduce:
>         # save the attached .config to linux build tree
>         make ARCH=x86_64
>
> If you fix the issue, kindly add following tag
> Reported-by: kbuild test robot <lkp@intel.com>
>
> All errors (new ones prefixed by >>):
>
>    ld: drivers/usb/dwc2/platform.o: in function `dwc2_can_poweroff_phy':
> >> drivers/usb/dwc2/platform.c:545: undefined reference to `usb_wakeup_enabled_descendants'

Thank you.  Fixed in v3:

https://lkml.kernel.org/r/20190520175605.2405-1-dianders@chromium.org

-Doug