From: Greg Kurz <groug@kaod.org> To: Sasha Levin <sashal@kernel.org> Cc: "Michael Ellerman" <mpe@ellerman.id.au>, linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org, stable@vger.kernel.org, "Cédric Le Goater" <clg@kaod.org> Subject: Re: [PATCH] powerpc/pseries: Fix xive=off command line Date: Fri, 17 May 2019 12:57:54 +0200 [thread overview] Message-ID: <20190517125754.2f0a572e@bahia.lan> (raw) In-Reply-To: <20190515105443.835E72084E@mail.kernel.org> On Wed, 15 May 2019 10:54:42 +0000 Sasha Levin <sashal@kernel.org> wrote: > Hi, > Hi, > [This is an automated email] > > This commit has been processed because it contains a "Fixes:" tag, > fixing commit: eac1e731b59e powerpc/xive: guest exploitation of the XIVE interrupt controller. > > The bot has tested the following trees: v5.1.1, v5.0.15, v4.19.42, v4.14.118. > > v5.1.1: Build OK! > v5.0.15: Build OK! > v4.19.42: Failed to apply! Possible dependencies: > 8ca2d5151e7f ("powerpc/prom_init: Move a few remaining statics to appropriate sections") > c886087caee7 ("powerpc/prom_init: Move prom_radix_disable to __prombss") > Dependencies are: 3bad719b4954 ("powerpc/prom_init: Make of_workarounds static") e63334e556d9 ("powerpc/prom_init: Replace __initdata with __prombss when applicable") 11fdb309341c ("powerpc/prom_init: Remove support for OPAL v2") c886087caee7 ("powerpc/prom_init: Move prom_radix_disable to __prombss") 8ca2d5151e7f ("powerpc/prom_init: Move a few remaining statics to appropriate sections") f1f208e54d08 ("powerpc/prom_init: Generate "phandle" instead of "linux, phandle"") cbe46bd4f510 ("powerpc: remove CONFIG_CMDLINE #ifdef mess") 450e7dd4001f ("powerpc/prom_init: don't use string functions from lib/") The patches apply flawlessly and allow the build to succeed. > v4.14.118: Failed to apply! Possible dependencies: > 028555a590d6 ("powerpc/xive: fix hcall H_INT_RESET to support long busy delays") > 7a22d6321c3d ("powerpc/mm/radix: Update command line parsing for disable_radix") > 8ca2d5151e7f ("powerpc/prom_init: Move a few remaining statics to appropriate sections") > c886087caee7 ("powerpc/prom_init: Move prom_radix_disable to __prombss") > Dependencies are: 7a22d6321c3d ("powerpc/mm/radix: Update command line parsing for disable_radix") 028555a590d6 ("powerpc/xive: fix hcall H_INT_RESET to support long busy delays") 3bad719b4954 ("powerpc/prom_init: Make of_workarounds static") e63334e556d9 ("powerpc/prom_init: Replace __initdata with __prombss when applicable") 11fdb309341c ("powerpc/prom_init: Remove support for OPAL v2") c886087caee7 ("powerpc/prom_init: Move prom_radix_disable to __prombss") 8ca2d5151e7f ("powerpc/prom_init: Move a few remaining statics to appropriate sections") f1f208e54d08 ("powerpc/prom_init: Generate "phandle" instead of "linux, phandle"") cbe46bd4f510 ("powerpc: remove CONFIG_CMDLINE #ifdef mess") 450e7dd4001f ("powerpc/prom_init: don't use string functions from lib/") The patches apply flawlessly and allow the build to succeed. > > How should we proceed with this patch? > xive=off allows the kernel to use the legacy XICS interrupt controller interface on POWER9, definitely not a recommended setting. A typical usage for this would be to workaround some issue that would only pop up when using XIVE. Note also that this only affects the pseries platform, ie. running under an hypervisor (KVM or pHyp). I cannot state right now whether it is worth the pain to cherry-pick all the dependencies to fix this or not in older kernels... Cheers, -- Greg > -- > Thanks, > Sasha
WARNING: multiple messages have this Message-ID (diff)
From: Greg Kurz <groug@kaod.org> To: Sasha Levin <sashal@kernel.org> Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org, stable@vger.kernel.org, "Cédric Le Goater" <clg@kaod.org> Subject: Re: [PATCH] powerpc/pseries: Fix xive=off command line Date: Fri, 17 May 2019 12:57:54 +0200 [thread overview] Message-ID: <20190517125754.2f0a572e@bahia.lan> (raw) In-Reply-To: <20190515105443.835E72084E@mail.kernel.org> On Wed, 15 May 2019 10:54:42 +0000 Sasha Levin <sashal@kernel.org> wrote: > Hi, > Hi, > [This is an automated email] > > This commit has been processed because it contains a "Fixes:" tag, > fixing commit: eac1e731b59e powerpc/xive: guest exploitation of the XIVE interrupt controller. > > The bot has tested the following trees: v5.1.1, v5.0.15, v4.19.42, v4.14.118. > > v5.1.1: Build OK! > v5.0.15: Build OK! > v4.19.42: Failed to apply! Possible dependencies: > 8ca2d5151e7f ("powerpc/prom_init: Move a few remaining statics to appropriate sections") > c886087caee7 ("powerpc/prom_init: Move prom_radix_disable to __prombss") > Dependencies are: 3bad719b4954 ("powerpc/prom_init: Make of_workarounds static") e63334e556d9 ("powerpc/prom_init: Replace __initdata with __prombss when applicable") 11fdb309341c ("powerpc/prom_init: Remove support for OPAL v2") c886087caee7 ("powerpc/prom_init: Move prom_radix_disable to __prombss") 8ca2d5151e7f ("powerpc/prom_init: Move a few remaining statics to appropriate sections") f1f208e54d08 ("powerpc/prom_init: Generate "phandle" instead of "linux, phandle"") cbe46bd4f510 ("powerpc: remove CONFIG_CMDLINE #ifdef mess") 450e7dd4001f ("powerpc/prom_init: don't use string functions from lib/") The patches apply flawlessly and allow the build to succeed. > v4.14.118: Failed to apply! Possible dependencies: > 028555a590d6 ("powerpc/xive: fix hcall H_INT_RESET to support long busy delays") > 7a22d6321c3d ("powerpc/mm/radix: Update command line parsing for disable_radix") > 8ca2d5151e7f ("powerpc/prom_init: Move a few remaining statics to appropriate sections") > c886087caee7 ("powerpc/prom_init: Move prom_radix_disable to __prombss") > Dependencies are: 7a22d6321c3d ("powerpc/mm/radix: Update command line parsing for disable_radix") 028555a590d6 ("powerpc/xive: fix hcall H_INT_RESET to support long busy delays") 3bad719b4954 ("powerpc/prom_init: Make of_workarounds static") e63334e556d9 ("powerpc/prom_init: Replace __initdata with __prombss when applicable") 11fdb309341c ("powerpc/prom_init: Remove support for OPAL v2") c886087caee7 ("powerpc/prom_init: Move prom_radix_disable to __prombss") 8ca2d5151e7f ("powerpc/prom_init: Move a few remaining statics to appropriate sections") f1f208e54d08 ("powerpc/prom_init: Generate "phandle" instead of "linux, phandle"") cbe46bd4f510 ("powerpc: remove CONFIG_CMDLINE #ifdef mess") 450e7dd4001f ("powerpc/prom_init: don't use string functions from lib/") The patches apply flawlessly and allow the build to succeed. > > How should we proceed with this patch? > xive=off allows the kernel to use the legacy XICS interrupt controller interface on POWER9, definitely not a recommended setting. A typical usage for this would be to workaround some issue that would only pop up when using XIVE. Note also that this only affects the pseries platform, ie. running under an hypervisor (KVM or pHyp). I cannot state right now whether it is worth the pain to cherry-pick all the dependencies to fix this or not in older kernels... Cheers, -- Greg > -- > Thanks, > Sasha
next prev parent reply other threads:[~2019-05-17 11:34 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-05-15 10:05 [PATCH] powerpc/pseries: Fix xive=off command line Greg Kurz 2019-05-15 10:05 ` Greg Kurz 2019-05-15 10:13 ` Cédric Le Goater 2019-05-15 10:13 ` Cédric Le Goater 2019-05-15 10:54 ` Sasha Levin 2019-05-17 10:57 ` Greg Kurz [this message] 2019-05-17 10:57 ` Greg Kurz 2019-06-03 12:32 ` Michael Ellerman
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190517125754.2f0a572e@bahia.lan \ --to=groug@kaod.org \ --cc=clg@kaod.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linuxppc-dev@lists.ozlabs.org \ --cc=mpe@ellerman.id.au \ --cc=sashal@kernel.org \ --cc=stable@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.