[PATCH 4.14 000/115] 4.14.120-stable review

[PATCH 4.14 000/115] 4.14.120-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.14.120 release.
There are 115 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Fri 17 May 2019 09:04:39 AM UTC.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.120-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.14.120-rc1

Laurentiu Tudor <laurentiu.tudor@nxp.com>
    powerpc/booke64: set RI in default MSR

Russell Currey <ruscur@russell.cc>
    powerpc/powernv/idle: Restore IAMR after idle

Dan Carpenter <dan.carpenter@oracle.com>
    drivers/virt/fsl_hypervisor.c: prevent integer overflow in ioctl

Dan Carpenter <dan.carpenter@oracle.com>
    drivers/virt/fsl_hypervisor.c: dereferencing error pointers in ioctl

Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@gmail.com>
    tipc: fix hanging clients using poll with EPOLLOUT flag

Stephen Suryaputra <ssuryaextr@gmail.com>
    vrf: sit mtu should not be updated when vrf netdev is the link

Hangbin Liu <liuhangbin@gmail.com>
    vlan: disable SIOCSHWTSTAMP in container

YueHaibing <yuehaibing@huawei.com>
    packet: Fix error path in packet_init

Christophe Leroy <christophe.leroy@c-s.fr>
    net: ucc_geth - fix Oops when changing number of buffers in the ring

Thomas Bogendoerfer <tbogendoerfer@suse.de>
    net: seeq: fix crash caused by not set dev.parent

Corentin Labbe <clabbe@baylibre.com>
    net: ethernet: stmmac: dwmac-sun8i: enable support of unicast filtering

YueHaibing <yuehaibing@huawei.com>
    net: dsa: Fix error cleanup path in dsa_init_module

David Ahern <dsahern@gmail.com>
    ipv4: Fix raw socket lookup for local traffic

Hangbin Liu <liuhangbin@gmail.com>
    fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied

Laurentiu Tudor <laurentiu.tudor@nxp.com>
    dpaa_eth: fix SG frame cleanup

Tobin C. Harding <tobin@kernel.org>
    bridge: Fix error path for kobject_init_and_add()

Jarod Wilson <jarod@redhat.com>
    bonding: fix arp_validate toggling in active-backup mode

Breno Leitao <leitao@debian.org>
    powerpc/64s: Include cpu header

Nigel Croxon <ncroxon@redhat.com>
    Don't jump to compute_result state from check_result state

Gustavo A. R. Silva <gustavo@embeddedor.com>
    rtlwifi: rtl8723ae: Fix missing break in switch statement

Petr Štetiar <ynezz@true.cz>
    mwl8k: Fix rate_idx underflow

Wei Yongjun <weiyongjun1@huawei.com>
    cw1200: fix missing unlock on error in cw1200_hw_scan()

Masami Hiramatsu <mhiramat@kernel.org>
    x86/kprobes: Avoid kretprobe recursion bug

Dan Carpenter <dan.carpenter@oracle.com>
    nfc: nci: Potential off by one in ->pipes[] array

Dan Carpenter <dan.carpenter@oracle.com>
    NFC: nci: Add some bounds checking in nci_hci_cmd_received()

Ido Schimmel <idosch@mellanox.com>
    mlxsw: core: Do not use WQ_MEM_RECLAIM for mlxsw workqueue

Ido Schimmel <idosch@mellanox.com>
    mlxsw: core: Do not use WQ_MEM_RECLAIM for mlxsw ordered workqueue

Ido Schimmel <idosch@mellanox.com>
    mlxsw: core: Do not use WQ_MEM_RECLAIM for EMAD workqueue

Ido Schimmel <idosch@mellanox.com>
    mlxsw: spectrum_switchdev: Add MDB entries in prepare phase

Andy Duan <fugang.duan@nxp.com>
    net: fec: manage ahb clock in runtime pm

Jan Kara <jack@suse.cz>
    mm/memory.c: fix modifying of page protection by insert_pfn()

Jun Xiao <xiaojun2@hisilicon.com>
    net: hns: Fix WARNING when hns modules installed

Sebastian Andrzej Siewior <bigeasy@linutronix.de>
    x86/fpu: Don't export __kernel_fpu_{begin,end}()

Ronnie Sahlberg <lsahlber@redhat.com>
    cifs: fix memory leak in SMB2_read

Damian Kos <dkos@cadence.com>
    drm/rockchip: fix for mailbox read validation.

Florian Westphal <fw@strlen.de>
    netfilter: nf_tables: warn when expr implements only one of activate/deactivate

KT Liao <kt.liao@emc.com.tw>
    Input: elan_i2c - add hardware ID for multiple Lenovo laptops

Erik Schmauss <erik.schmauss@intel.com>
    ACPICA: Namespace: remove address node from global list after method termination

Matteo Croce <mcroce@redhat.com>
    gtp: change NET_UDP_TUNNEL dependency to select

Cong Wang <xiyou.wangcong@gmail.com>
    net_sched: fix two more memory leaks in cls_tcindex

Max Filippov <jcmvbkbc@gmail.com>
    xtensa: xtfpga.dtsi: fix dtc warnings about SPI

Alexey Brodkin <alexey.brodkin@synopsys.com>
    devres: Align data[] to ARCH_KMALLOC_MINALIGN

Nicolas Pitre <nicolas.pitre@linaro.org>
    vt: always call notifier with the console lock held

Heinrich Schuchardt <xypron.glpk@gmx.de>
    arm64: dts: marvell: armada-ap806: reserve PSCI area

Adit Ranadive <aditr@vmware.com>
    RDMA/vmw_pvrdma: Return the correct opcode when creating WR

Enric Balletbo i Serra <enric.balletbo@collabora.com>
    drm/rockchip: psr: do not dereference encoder before it is null checked.

Jerome Brunet <jbrunet@baylibre.com>
    leds: pwm: silently error out on EPROBE_DEFER

Nicholas Piggin <npiggin@gmail.com>
    powerpc: remove old GCC version checks

Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
    crypto: testmgr - add AES-CFB tests

Marc Zyngier <marc.zyngier@arm.com>
    arm64: KVM: Make VHE Stage-2 TLB invalidation operations non-interruptible

Martin Schwidefsky <schwidefsky@de.ibm.com>
    mm: introduce mm_[p4d|pud|pmd]_folded

Alistair Strachan <astrachan@google.com>
    x86/vdso: Pass --eh-frame-hdr to the linker

Omar Sandoval <osandov@fb.com>
    Btrfs: fix missing delayed iputs on unmount

Thierry Reding <treding@nvidia.com>
    net: stmmac: Move debugfs init/exit to ->probe()/->remove()

Lubomir Rintel <lkundrak@v3.sk>
    staging: olpc_dcon: add a missing dependency

Arnd Bergmann <arnd@arndb.de>
    scsi: raid_attrs: fix unused variable warning

Chris Wilson <chris@chris-wilson.co.uk>
    drm/i915: Downgrade Gen9 Plane WM latency error

Steven Rostedt (VMware) <rostedt@goodmis.org>
    tracing/fgraph: Fix set_graph_function from showing interrupts

Paolo Abeni <pabeni@redhat.com>
    net: don't keep lonely packets forever in the gro hash

Hugues Fruchet <hugues.fruchet@st.com>
    media: ov5640: fix auto controls values when switching to manual mode

Hugues Fruchet <hugues.fruchet@st.com>
    media: ov5640: fix wrong binning value in exposure calculation

Ville Syrjälä <ville.syrjala@linux.intel.com>
    drm/i915: Disable LP3 watermarks on all SNB machines

Vignesh R <vigneshr@ti.com>
    i2c: omap: Enable for ARCH_K3

Miklos Szeredi <mszeredi@redhat.com>
    fuse: fix possibly missed wake-up after abort

Hans Verkuil <hans.verkuil@cisco.com>
    media: adv7842: when the EDID is cleared, unconfigure CEC as well

Hans Verkuil <hans.verkuil@cisco.com>
    media: adv7604: when the EDID is cleared, unconfigure CEC as well

Hans Verkuil <hans.verkuil@cisco.com>
    media: cec: integrate cec_validate_phys_addr() in cec-api.c

Hans Verkuil <hans.verkuil@cisco.com>
    media: cec: make cec_get_edid_spa_location() an inline function

Punit Agrawal <punit.agrawal@arm.com>
    KVM: arm/arm64: Ensure only THP is candidate for adjustment

Goldwyn Rodrigues <rgoldwyn@suse.de>
    ima: open a new file instance if no read permissions

Jason Gunthorpe <jgg@mellanox.com>
    IB/rxe: Revise the ib_wr_opcode enum

Erik Schmauss <erik.schmauss@intel.com>
    ACPICA: AML interpreter: add region addresses in global list during initialization

Tang Junhui <tang.junhui.linux@gmail.com>
    bcache: correct dirty data statistics

Huacai Chen <chenhc@lemote.com>
    MIPS: VDSO: Reduce VDSO_RANDOMIZE_SIZE to 64MB for 64bit

David Miller <davem@redhat.com>
    sparc64: Make corrupted user stacks more debuggable.

David S. Miller <davem@davemloft.net>
    sparc64: Export __node_distance.

Pan Bian <bianpan2016@163.com>
    Input: synaptics-rmi4 - fix possible double free

Daniel Gomez <dagmcr@gmail.com>
    spi: ST ST95HF NFC: declare missing of table

Daniel Gomez <dagmcr@gmail.com>
    spi: Micrel eth switch: declare missing of table

Lucas Stach <l.stach@pengutronix.de>
    drm/imx: don't skip DP channel disable for background plane

Lucas Stach <l.stach@pengutronix.de>
    gpu: ipu-v3: dp: fix CSC handling

Po-Hsu Lin <po-hsu.lin@canonical.com>
    selftests/net: correct the return value for run_netsocktests

Paul Kocialkowski <paul.kocialkowski@bootlin.com>
    drm/sun4i: Set device driver data at bind time for use in unbind

Arnd Bergmann <arnd@arndb.de>
    s390: ctcm: fix ctcm_new_device error return code

Petr Štetiar <ynezz@true.cz>
    MIPS: perf: ath79: Fix perfcount IRQ assignment

Florian Westphal <fw@strlen.de>
    netfilter: ctnetlink: don't use conntrack/expect object addresses as id

Julian Anastasov <ja@ssi.bg>
    ipvs: do not schedule icmp errors from tunnels

Florian Westphal <fw@strlen.de>
    selftests: netfilter: check icmp pkttoobig errors are set as related

Dan Williams <dan.j.williams@intel.com>
    init: initialize jump labels before command line option parsing

Johannes Weiner <hannes@cmpxchg.org>
    mm: fix inactive list balancing between NUMA nodes and cgroups

Rikard Falkeborn <rikard.falkeborn@gmail.com>
    tools lib traceevent: Fix missing equality check for strcmp

Vitaly Kuznetsov <vkuznets@redhat.com>
    KVM: x86: avoid misreporting level-triggered irqs as edge-triggered in tracing

Paolo Bonzini <pbonzini@redhat.com>
    KVM: fix spectrev1 gadgets

Jian-Hong Pan <jian-hong@endlessm.com>
    x86/reboot, efi: Use EFI reboot for Acer TravelMate X514-51T

Harald Freudenberger <freude@linux.ibm.com>
    s390/pkey: add one more argument space for debug feature entry

Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
    mISDN: Check address length before reading address family

Neil Armstrong <narmstrong@baylibre.com>
    clocksource/drivers/oxnas: Fix OX820 compatible

Martin Schwidefsky <schwidefsky@de.ibm.com>
    s390/3270: fix lockdep false positive on view->lock

Sunil Dutt <usdutt@codeaurora.org>
    nl80211: Add NL80211_FLAG_CLEAR_SKB flag for other NL commands

Felix Fietkau <nbd@nbd.name>
    mac80211: fix memory accounting with A-MSDU aggregation

Andrei Otcheretianski <andrei.otcheretianski@intel.com>
    mac80211: Increase MAX_MSG_LEN

Felix Fietkau <nbd@nbd.name>
    mac80211: fix unaligned access in mesh table hash function

Peter Oberparleiter <oberpar@linux.ibm.com>
    s390/dasd: Fix capacity calculation for large volumes

Aditya Pakki <pakki001@umn.edu>
    libnvdimm/btt: Fix a kmemdup failure check

Dmitry Torokhov <dmitry.torokhov@gmail.com>
    HID: input: add mapping for "Toggle Display" key

Dmitry Torokhov <dmitry.torokhov@gmail.com>
    HID: input: add mapping for keyboard Brightness Up/Down/Toggle keys

Dmitry Torokhov <dmitry.torokhov@gmail.com>
    HID: input: add mapping for Expose/Overview key

Kangjie Lu <kjlu@umn.edu>
    libnvdimm/namespace: Fix a potential NULL pointer dereference

Sven Van Asbroeck <thesven73@gmail.com>
    iio: adc: xilinx: fix potential use-after-free on remove

Johan Hovold <johan@kernel.org>
    USB: serial: fix unthrottle races

Andrea Parri <andrea.parri@amarulasolutions.com>
    kernfs: fix barrier usage in __kernfs_new_node()

Stefan Wahren <stefan.wahren@i2se.com>
    hwmon: (pwm-fan) Disable PWM if fetching cooling data fails

Jiaxun Yang <jiaxun.yang@flygoat.com>
    platform/x86: thinkpad_acpi: Disable Bluetooth for some machines

Gustavo A. R. Silva <gustavo@embeddedor.com>
    platform/x86: sony-laptop: Fix unintentional fall-through

Francesco Ruggeri <fruggeri@arista.com>
    netfilter: compat: initialize all fields in xt_init


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/arm64/boot/dts/marvell/armada-ap806.dtsi      |  17 ++
 arch/arm64/kvm/hyp/tlb.c                           |  35 ++-
 arch/mips/ath79/setup.c                            |   6 -
 arch/mips/include/asm/processor.h                  |   2 +-
 arch/powerpc/Makefile                              |  31 +--
 arch/powerpc/include/asm/reg_booke.h               |   2 +-
 arch/powerpc/kernel/idle_book3s.S                  |  20 ++
 arch/powerpc/kernel/security.c                     |   1 +
 arch/sparc/include/asm/switch_to_64.h              |   3 +-
 arch/sparc/kernel/process_64.c                     |  25 +-
 arch/sparc/kernel/rtrap_64.S                       |   1 +
 arch/sparc/kernel/signal32.c                       |  12 +-
 arch/sparc/kernel/signal_64.c                      |   6 +-
 arch/sparc/mm/init_64.c                            |   1 +
 arch/x86/entry/vdso/Makefile                       |   3 +-
 arch/x86/include/asm/efi.h                         |   6 +-
 arch/x86/include/asm/fpu/api.h                     |  15 +-
 arch/x86/kernel/fpu/core.c                         |   6 +-
 arch/x86/kernel/kprobes/core.c                     |  22 +-
 arch/x86/kernel/reboot.c                           |  21 ++
 arch/x86/kvm/lapic.c                               |   4 +-
 arch/x86/kvm/trace.h                               |   4 +-
 arch/xtensa/boot/dts/xtfpga.dtsi                   |   2 +-
 crypto/tcrypt.c                                    |   5 +
 crypto/testmgr.c                                   |   7 +
 crypto/testmgr.h                                   |  76 ++++++
 drivers/acpi/acpica/dsopcode.c                     |   4 +
 drivers/acpi/acpica/nsobject.c                     |   4 +
 drivers/base/devres.c                              |  10 +-
 drivers/clocksource/timer-oxnas-rps.c              |   2 +-
 drivers/gpu/drm/i915/intel_pm.c                    |  45 +++-
 drivers/gpu/drm/imx/ipuv3-crtc.c                   |   2 +-
 drivers/gpu/drm/rockchip/cdn-dp-reg.c              |   2 +-
 drivers/gpu/drm/rockchip/rockchip_drm_psr.c        |   4 +-
 drivers/gpu/drm/sun4i/sun4i_drv.c                  |   2 +
 drivers/gpu/ipu-v3/ipu-dp.c                        |  12 +-
 drivers/hid/hid-input.c                            |  14 +
 drivers/hwmon/pwm-fan.c                            |   2 +-
 drivers/i2c/busses/Kconfig                         |   2 +-
 drivers/iio/adc/xilinx-xadc-core.c                 |   2 +-
 drivers/infiniband/hw/vmw_pvrdma/pvrdma.h          |  35 ++-
 drivers/infiniband/hw/vmw_pvrdma/pvrdma_qp.c       |   6 +
 drivers/input/mouse/elan_i2c_core.c                |  25 ++
 drivers/input/rmi4/rmi_driver.c                    |   6 +-
 drivers/irqchip/irq-ath79-misc.c                   |  11 +
 drivers/isdn/mISDN/socket.c                        |   4 +-
 drivers/leds/leds-pwm.c                            |   5 +-
 drivers/md/bcache/super.c                          |   3 +-
 drivers/md/raid5.c                                 |  19 +-
 drivers/media/cec/cec-api.c                        |  19 +-
 drivers/media/cec/cec-edid.c                       |  60 -----
 drivers/media/i2c/adv7604.c                        |   4 +-
 drivers/media/i2c/adv7842.c                        |   4 +-
 drivers/media/i2c/ov5640.c                         |  12 +-
 drivers/net/Kconfig                                |   4 +-
 drivers/net/bonding/bond_options.c                 |   7 -
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c     |   2 +-
 drivers/net/ethernet/freescale/fec_main.c          |  30 ++-
 drivers/net/ethernet/freescale/ucc_geth_ethtool.c  |   8 +-
 drivers/net/ethernet/hisilicon/hns/hns_enet.c      |  15 +-
 drivers/net/ethernet/mellanox/mlxsw/core.c         |   6 +-
 .../ethernet/mellanox/mlxsw/spectrum_switchdev.c   |   2 +-
 drivers/net/ethernet/seeq/sgiseeq.c                |   1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c  |   2 +
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |  23 +-
 drivers/net/phy/spi_ks8995.c                       |   9 +
 drivers/net/wireless/marvell/mwl8k.c               |  13 +-
 .../net/wireless/realtek/rtlwifi/rtl8723ae/hw.c    |   1 +
 drivers/net/wireless/st/cw1200/scan.c              |   5 +-
 drivers/nfc/st95hf/core.c                          |   7 +
 drivers/nvdimm/btt_devs.c                          |  18 +-
 drivers/nvdimm/namespace_devs.c                    |   5 +-
 drivers/platform/x86/sony-laptop.c                 |   8 +-
 drivers/platform/x86/thinkpad_acpi.c               |  72 +++++-
 drivers/s390/block/dasd_eckd.c                     |   6 +-
 drivers/s390/char/con3270.c                        |   2 +-
 drivers/s390/char/fs3270.c                         |   3 +-
 drivers/s390/char/raw3270.c                        |   3 +-
 drivers/s390/char/raw3270.h                        |   4 +-
 drivers/s390/char/tty3270.c                        |   3 +-
 drivers/s390/crypto/pkey_api.c                     |   3 +-
 drivers/s390/net/ctcm_main.c                       |   1 +
 drivers/scsi/raid_class.c                          |   4 +-
 drivers/staging/olpc_dcon/Kconfig                  |   1 +
 drivers/tty/vt/vt.c                                |   2 +-
 drivers/usb/serial/generic.c                       |  39 ++-
 drivers/virt/fsl_hypervisor.c                      |  29 ++-
 fs/btrfs/disk-io.c                                 |  51 ++--
 fs/cifs/smb2pdu.c                                  |   1 +
 fs/fuse/dev.c                                      |  12 +-
 fs/kernfs/dir.c                                    |   5 +-
 include/asm-generic/pgtable.h                      |  16 ++
 include/linux/efi.h                                |   7 +-
 include/linux/kvm_host.h                           |  10 +-
 include/media/cec.h                                |  70 +++++
 include/net/netfilter/nf_conntrack.h               |   2 +
 include/net/nfc/nci_core.h                         |   2 +-
 include/rdma/ib_verbs.h                            |  34 ++-
 include/uapi/rdma/ib_user_verbs.h                  |  20 +-
 include/uapi/rdma/vmw_pvrdma-abi.h                 |   1 +
 init/main.c                                        |   4 +-
 kernel/trace/trace.h                               |  57 ++++-
 kernel/trace/trace_functions_graph.c               |   4 +
 kernel/trace/trace_irqsoff.c                       |   2 +
 kernel/trace/trace_sched_wakeup.c                  |   2 +
 mm/memory.c                                        |  11 +-
 mm/vmscan.c                                        |  29 +--
 net/8021q/vlan_dev.c                               |   4 +-
 net/bridge/br_if.c                                 |  13 +-
 net/core/dev.c                                     |   7 +-
 net/core/fib_rules.c                               |   6 +-
 net/dsa/dsa.c                                      |  11 +-
 net/ipv4/raw.c                                     |   4 +-
 net/ipv6/sit.c                                     |   2 +-
 net/mac80211/mesh_pathtbl.c                        |   2 +-
 net/mac80211/trace_msg.h                           |   7 +-
 net/mac80211/tx.c                                  |   3 +
 net/netfilter/ipvs/ip_vs_core.c                    |   2 +-
 net/netfilter/nf_conntrack_core.c                  |  35 +++
 net/netfilter/nf_conntrack_netlink.c               |  34 ++-
 net/netfilter/nf_tables_api.c                      |  19 ++
 net/netfilter/x_tables.c                           |   2 +-
 net/nfc/nci/hci.c                                  |   8 +
 net/packet/af_packet.c                             |  25 +-
 net/sched/cls_tcindex.c                            |  16 +-
 net/tipc/socket.c                                  |   4 +-
 net/wireless/nl80211.c                             |  18 +-
 security/integrity/ima/ima_crypto.c                |  54 ++--
 tools/lib/traceevent/event-parse.c                 |   2 +-
 tools/testing/selftests/net/run_netsocktests       |   2 +-
 tools/testing/selftests/netfilter/Makefile         |   2 +-
 .../selftests/netfilter/conntrack_icmp_related.sh  | 283 +++++++++++++++++++++
 virt/kvm/arm/mmu.c                                 |   8 +-
 virt/kvm/irqchip.c                                 |   5 +-
 virt/kvm/kvm_main.c                                |   6 +-
 136 files changed, 1457 insertions(+), 462 deletions(-)

[PATCH 4.14 001/115] netfilter: compat: initialize all fields in xt_init

[Greg Kroah-Hartman]

commit 8d29d16d21342a0c86405d46de0c4ac5daf1760f upstream

If a non zero value happens to be in xt[NFPROTO_BRIDGE].cur at init
time, the following panic can be caused by running

% ebtables -t broute -F BROUTING

from a 32-bit user level on a 64-bit kernel. This patch replaces
kmalloc_array with kcalloc when allocating xt.

[  474.680846] BUG: unable to handle kernel paging request at 0000000009600920
[  474.687869] PGD 2037006067 P4D 2037006067 PUD 2038938067 PMD 0
[  474.693838] Oops: 0000 [#1] SMP
[  474.697055] CPU: 9 PID: 4662 Comm: ebtables Kdump: loaded Not tainted 4.19.17-11302235.AroraKernelnext.fc18.x86_64 #1
[  474.707721] Hardware name: Supermicro X9DRT/X9DRT, BIOS 3.0 06/28/2013
[  474.714313] RIP: 0010:xt_compat_calc_jump+0x2f/0x63 [x_tables]
[  474.720201] Code: 40 0f b6 ff 55 31 c0 48 6b ff 70 48 03 3d dc 45 00 00 48 89 e5 8b 4f 6c 4c 8b 47 60 ff c9 39 c8 7f 2f 8d 14 08 d1 fa 48 63 fa <41> 39 34 f8 4c 8d 0c fd 00 00 00 00 73 05 8d 42 01 eb e1 76 05 8d
[  474.739023] RSP: 0018:ffffc9000943fc58 EFLAGS: 00010207
[  474.744296] RAX: 0000000000000000 RBX: ffffc90006465000 RCX: 0000000002580249
[  474.751485] RDX: 00000000012c0124 RSI: fffffffff7be17e9 RDI: 00000000012c0124
[  474.758670] RBP: ffffc9000943fc58 R08: 0000000000000000 R09: ffffffff8117cf8f
[  474.765855] R10: ffffc90006477000 R11: 0000000000000000 R12: 0000000000000001
[  474.773048] R13: 0000000000000000 R14: ffffc9000943fcb8 R15: ffffc9000943fcb8
[  474.780234] FS:  0000000000000000(0000) GS:ffff88a03f840000(0063) knlGS:00000000f7ac7700
[  474.788612] CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
[  474.794632] CR2: 0000000009600920 CR3: 0000002037422006 CR4: 00000000000606e0
[  474.802052] Call Trace:
[  474.804789]  compat_do_replace+0x1fb/0x2a3 [ebtables]
[  474.810105]  compat_do_ebt_set_ctl+0x69/0xe6 [ebtables]
[  474.815605]  ? try_module_get+0x37/0x42
[  474.819716]  compat_nf_setsockopt+0x4f/0x6d
[  474.824172]  compat_ip_setsockopt+0x7e/0x8c
[  474.828641]  compat_raw_setsockopt+0x16/0x3a
[  474.833220]  compat_sock_common_setsockopt+0x1d/0x24
[  474.838458]  __compat_sys_setsockopt+0x17e/0x1b1
[  474.843343]  ? __check_object_size+0x76/0x19a
[  474.847960]  __ia32_compat_sys_socketcall+0x1cb/0x25b
[  474.853276]  do_fast_syscall_32+0xaf/0xf6
[  474.857548]  entry_SYSENTER_compat+0x6b/0x7a

Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Zubin Mithra <zsm@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/x_tables.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/x_tables.c b/net/netfilter/x_tables.c
index 8e054c63b54e4..d42211a0b5e3b 100644
--- a/net/netfilter/x_tables.c
+++ b/net/netfilter/x_tables.c
@@ -1798,7 +1798,7 @@ static int __init xt_init(void)
 		seqcount_init(&per_cpu(xt_recseq, i));
 	}
 
-	xt = kmalloc(sizeof(struct xt_af) * NFPROTO_NUMPROTO, GFP_KERNEL);
+	xt = kcalloc(NFPROTO_NUMPROTO, sizeof(struct xt_af), GFP_KERNEL);
 	if (!xt)
 		return -ENOMEM;
 
-- 
2.20.1

[PATCH 4.14 002/115] platform/x86: sony-laptop: Fix unintentional fall-through

[Greg Kroah-Hartman]

From: Gustavo A. R. Silva <gustavo@embeddedor.com>

commit 1cbd7a64959d33e7a2a1fa2bf36a62b350a9fcbd upstream.

It seems that the default case should return AE_CTRL_TERMINATE, instead
of falling through to case ACPI_RESOURCE_TYPE_END_TAG and returning AE_OK;
otherwise the line of code at the end of the function is unreachable and
makes no sense:

return AE_CTRL_TERMINATE;

This fix is based on the following thread of discussion:

https://lore.kernel.org/patchwork/patch/959782/

Fixes: 33a04454527e ("sony-laptop: Add SNY6001 device handling (sonypi reimplementation)")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/platform/x86/sony-laptop.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -4422,14 +4422,16 @@ sony_pic_read_possible_resource(struct a
 			}
 			return AE_OK;
 		}
+
+	case ACPI_RESOURCE_TYPE_END_TAG:
+		return AE_OK;
+
 	default:
 		dprintk("Resource %d isn't an IRQ nor an IO port\n",
 			resource->type);
+		return AE_CTRL_TERMINATE;
 
-	case ACPI_RESOURCE_TYPE_END_TAG:
-		return AE_OK;
 	}
-	return AE_CTRL_TERMINATE;
 }
 
 static int sony_pic_possible_resources(struct acpi_device *device)

[PATCH 4.14 003/115] platform/x86: thinkpad_acpi: Disable Bluetooth for some machines

[Greg Kroah-Hartman]

From: Jiaxun Yang <jiaxun.yang@flygoat.com>

commit f7db839fccf087664e5587966220821289b6a9cb upstream.

Some AMD based ThinkPads have a firmware bug that calling
"GBDC" will cause Bluetooth on Intel wireless cards blocked.

Probe these models by DMI match and disable Bluetooth subdriver
if specified Intel wireless card exist.

Cc: stable <stable@vger.kernel.org> # 4.14+
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/platform/x86/thinkpad_acpi.c |   72 ++++++++++++++++++++++++++++++++++-
 1 file changed, 70 insertions(+), 2 deletions(-)

--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -77,7 +77,7 @@
 #include <linux/jiffies.h>
 #include <linux/workqueue.h>
 #include <linux/acpi.h>
-#include <linux/pci_ids.h>
+#include <linux/pci.h>
 #include <linux/thinkpad_acpi.h>
 #include <sound/core.h>
 #include <sound/control.h>
@@ -4366,6 +4366,74 @@ static void bluetooth_exit(void)
 	bluetooth_shutdown();
 }
 
+static const struct dmi_system_id bt_fwbug_list[] __initconst = {
+	{
+		.ident = "ThinkPad E485",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_BOARD_NAME, "20KU"),
+		},
+	},
+	{
+		.ident = "ThinkPad E585",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_BOARD_NAME, "20KV"),
+		},
+	},
+	{
+		.ident = "ThinkPad A285 - 20MW",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_BOARD_NAME, "20MW"),
+		},
+	},
+	{
+		.ident = "ThinkPad A285 - 20MX",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_BOARD_NAME, "20MX"),
+		},
+	},
+	{
+		.ident = "ThinkPad A485 - 20MU",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_BOARD_NAME, "20MU"),
+		},
+	},
+	{
+		.ident = "ThinkPad A485 - 20MV",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_BOARD_NAME, "20MV"),
+		},
+	},
+	{}
+};
+
+static const struct pci_device_id fwbug_cards_ids[] __initconst = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x24F3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x24FD) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2526) },
+	{}
+};
+
+
+static int __init have_bt_fwbug(void)
+{
+	/*
+	 * Some AMD based ThinkPads have a firmware bug that calling
+	 * "GBDC" will cause bluetooth on Intel wireless cards blocked
+	 */
+	if (dmi_check_system(bt_fwbug_list) && pci_dev_present(fwbug_cards_ids)) {
+		vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_RFKILL,
+			FW_BUG "disable bluetooth subdriver for Intel cards\n");
+		return 1;
+	} else
+		return 0;
+}
+
 static int __init bluetooth_init(struct ibm_init_struct *iibm)
 {
 	int res;
@@ -4378,7 +4446,7 @@ static int __init bluetooth_init(struct
 
 	/* bluetooth not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
 	   G4x, R30, R31, R40e, R50e, T20-22, X20-21 */
-	tp_features.bluetooth = hkey_handle &&
+	tp_features.bluetooth = !have_bt_fwbug() && hkey_handle &&
 	    acpi_evalf(hkey_handle, &status, "GBDC", "qd");
 
 	vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_RFKILL,

[PATCH 4.14 004/115] hwmon: (pwm-fan) Disable PWM if fetching cooling data fails

[Greg Kroah-Hartman]

From: Stefan Wahren <stefan.wahren@i2se.com>

commit 53f1647da3e8fb3e89066798f0fdc045064d353d upstream.

In case pwm_fan_of_get_cooling_data() fails we should disable the PWM
just like in the other error cases.

Fixes: 2e5219c77183 ("hwmon: (pwm-fan) Read PWM FAN configuration from device tree")
Cc: <stable@vger.kernel.org> # 4.14+
Reported-by: Guenter Rock <linux@roeck-us.net>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hwmon/pwm-fan.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/hwmon/pwm-fan.c
+++ b/drivers/hwmon/pwm-fan.c
@@ -250,7 +250,7 @@ static int pwm_fan_probe(struct platform
 
 	ret = pwm_fan_of_get_cooling_data(&pdev->dev, ctx);
 	if (ret)
-		return ret;
+		goto err_pwm_disable;
 
 	ctx->pwm_fan_state = ctx->pwm_fan_max_state;
 	if (IS_ENABLED(CONFIG_THERMAL)) {

[PATCH 4.14 005/115] kernfs: fix barrier usage in __kernfs_new_node()

[Greg Kroah-Hartman]

From: Andrea Parri <andrea.parri@amarulasolutions.com>

commit 998267900cee901c5d1dfa029a6304d00acbc29f upstream.

smp_mb__before_atomic() can not be applied to atomic_set().  Remove the
barrier and rely on RELEASE synchronization.

Fixes: ba16b2846a8c6 ("kernfs: add an API to get kernfs node from inode number")
Cc: stable@vger.kernel.org
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/kernfs/dir.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/fs/kernfs/dir.c
+++ b/fs/kernfs/dir.c
@@ -649,11 +649,10 @@ static struct kernfs_node *__kernfs_new_
 	kn->id.generation = gen;
 
 	/*
-	 * set ino first. This barrier is paired with atomic_inc_not_zero in
+	 * set ino first. This RELEASE is paired with atomic_inc_not_zero in
 	 * kernfs_find_and_get_node_by_ino
 	 */
-	smp_mb__before_atomic();
-	atomic_set(&kn->count, 1);
+	atomic_set_release(&kn->count, 1);
 	atomic_set(&kn->active, KN_DEACTIVATED_BIAS);
 	RB_CLEAR_NODE(&kn->rb);
 

[PATCH 4.14 006/115] USB: serial: fix unthrottle races

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 3f5edd58d040bfa4b74fb89bc02f0bc6b9cd06ab upstream.

Fix two long-standing bugs which could potentially lead to memory
corruption or leave the port throttled until it is reopened (on weakly
ordered systems), respectively, when read-URB completion races with
unthrottle().

First, the URB must not be marked as free before processing is complete
to prevent it from being submitted by unthrottle() on another CPU.

	CPU 1				CPU 2
	================		================
	complete()			unthrottle()
	  process_urb();
	  smp_mb__before_atomic();
	  set_bit(i, free);		  if (test_and_clear_bit(i, free))
	  					  submit_urb();

Second, the URB must be marked as free before checking the throttled
flag to prevent unthrottle() on another CPU from failing to observe that
the URB needs to be submitted if complete() sees that the throttled flag
is set.

	CPU 1				CPU 2
	================		================
	complete()			unthrottle()
	  set_bit(i, free);		  throttled = 0;
	  smp_mb__after_atomic();	  smp_mb();
	  if (throttled)		  if (test_and_clear_bit(i, free))
	  	  return;			  submit_urb();

Note that test_and_clear_bit() only implies barriers when the test is
successful. To handle the case where the URB is still in use an explicit
barrier needs to be added to unthrottle() for the second race condition.

Fixes: d83b405383c9 ("USB: serial: add support for multiple read urbs")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/generic.c |   39 ++++++++++++++++++++++++++++++++-------
 1 file changed, 32 insertions(+), 7 deletions(-)

--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -379,6 +379,7 @@ void usb_serial_generic_read_bulk_callba
 	struct usb_serial_port *port = urb->context;
 	unsigned char *data = urb->transfer_buffer;
 	unsigned long flags;
+	bool stopped = false;
 	int status = urb->status;
 	int i;
 
@@ -386,33 +387,51 @@ void usb_serial_generic_read_bulk_callba
 		if (urb == port->read_urbs[i])
 			break;
 	}
-	set_bit(i, &port->read_urbs_free);
 
 	dev_dbg(&port->dev, "%s - urb %d, len %d\n", __func__, i,
 							urb->actual_length);
 	switch (status) {
 	case 0:
+		usb_serial_debug_data(&port->dev, __func__, urb->actual_length,
+							data);
+		port->serial->type->process_read_urb(urb);
 		break;
 	case -ENOENT:
 	case -ECONNRESET:
 	case -ESHUTDOWN:
 		dev_dbg(&port->dev, "%s - urb stopped: %d\n",
 							__func__, status);
-		return;
+		stopped = true;
+		break;
 	case -EPIPE:
 		dev_err(&port->dev, "%s - urb stopped: %d\n",
 							__func__, status);
-		return;
+		stopped = true;
+		break;
 	default:
 		dev_dbg(&port->dev, "%s - nonzero urb status: %d\n",
 							__func__, status);
-		goto resubmit;
+		break;
 	}
 
-	usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data);
-	port->serial->type->process_read_urb(urb);
+	/*
+	 * Make sure URB processing is done before marking as free to avoid
+	 * racing with unthrottle() on another CPU. Matches the barriers
+	 * implied by the test_and_clear_bit() in
+	 * usb_serial_generic_submit_read_urb().
+	 */
+	smp_mb__before_atomic();
+	set_bit(i, &port->read_urbs_free);
+	/*
+	 * Make sure URB is marked as free before checking the throttled flag
+	 * to avoid racing with unthrottle() on another CPU. Matches the
+	 * smp_mb() in unthrottle().
+	 */
+	smp_mb__after_atomic();
+
+	if (stopped)
+		return;
 
-resubmit:
 	/* Throttle the device if requested by tty */
 	spin_lock_irqsave(&port->lock, flags);
 	port->throttled = port->throttle_req;
@@ -487,6 +506,12 @@ void usb_serial_generic_unthrottle(struc
 	port->throttled = port->throttle_req = 0;
 	spin_unlock_irq(&port->lock);
 
+	/*
+	 * Matches the smp_mb__after_atomic() in
+	 * usb_serial_generic_read_bulk_callback().
+	 */
+	smp_mb();
+
 	if (was_throttled)
 		usb_serial_generic_submit_read_urbs(port, GFP_KERNEL);
 }

[PATCH 4.14 007/115] iio: adc: xilinx: fix potential use-after-free on remove

[Greg Kroah-Hartman]

[ Upstream commit 62039b6aef63380ba7a37c113bbaeee8a55c5342 ]

When cancel_delayed_work() returns, the delayed work may still
be running. This means that the core could potentially free
the private structure (struct xadc) while the delayed work
is still using it. This is a potential use-after-free.

Fix by calling cancel_delayed_work_sync(), which waits for
any residual work to finish before returning.

Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/adc/xilinx-xadc-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c
index 4a60497a1f193..e89711b30ae8f 100644
--- a/drivers/iio/adc/xilinx-xadc-core.c
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -1302,7 +1302,7 @@ static int xadc_remove(struct platform_device *pdev)
 	}
 	free_irq(irq, indio_dev);
 	clk_disable_unprepare(xadc->clk);
-	cancel_delayed_work(&xadc->zynq_unmask_work);
+	cancel_delayed_work_sync(&xadc->zynq_unmask_work);
 	kfree(xadc->data);
 	kfree(indio_dev->channels);
 
-- 
2.20.1

[PATCH 4.14 008/115] libnvdimm/namespace: Fix a potential NULL pointer dereference

[Greg Kroah-Hartman]

[ Upstream commit 55c1fc0af29a6c1b92f217b7eb7581a882e0c07c ]

In case kmemdup fails, the fix goes to blk_err to avoid NULL
pointer dereference.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvdimm/namespace_devs.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/nvdimm/namespace_devs.c b/drivers/nvdimm/namespace_devs.c
index 50b01d3eadd9c..e3f228af59d1e 100644
--- a/drivers/nvdimm/namespace_devs.c
+++ b/drivers/nvdimm/namespace_devs.c
@@ -2234,9 +2234,12 @@ struct device *create_namespace_blk(struct nd_region *nd_region,
 	if (!nsblk->uuid)
 		goto blk_err;
 	memcpy(name, nd_label->name, NSLABEL_NAME_LEN);
-	if (name[0])
+	if (name[0]) {
 		nsblk->alt_name = kmemdup(name, NSLABEL_NAME_LEN,
 				GFP_KERNEL);
+		if (!nsblk->alt_name)
+			goto blk_err;
+	}
 	res = nsblk_add_resource(nd_region, ndd, nsblk,
 			__le64_to_cpu(nd_label->dpa));
 	if (!res)
-- 
2.20.1

[PATCH 4.14 009/115] HID: input: add mapping for Expose/Overview key

[Greg Kroah-Hartman]

[ Upstream commit 96dd86871e1fffbc39e4fa61c9c75ec54ee9af0f ]

According to HUTRR77 usage 0x29f from the consumer page is reserved for
the Desktop application to present all running user’s application windows.
Linux defines KEY_SCALE to request Compiz Scale (Expose) mode, so let's
add the mapping.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-input.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 1aa7d268686b9..693cd19e9dd40 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -1017,6 +1017,8 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 		case 0x2cb: map_key_clear(KEY_KBDINPUTASSIST_ACCEPT);	break;
 		case 0x2cc: map_key_clear(KEY_KBDINPUTASSIST_CANCEL);	break;
 
+		case 0x29f: map_key_clear(KEY_SCALE);		break;
+
 		default: map_key_clear(KEY_UNKNOWN);
 		}
 		break;
-- 
2.20.1

[PATCH 4.14 010/115] HID: input: add mapping for keyboard Brightness Up/Down/Toggle keys

[Greg Kroah-Hartman]

[ Upstream commit 7975a1d6a7afeb3eb61c971a153d24dd8fa032f3 ]

According to HUTRR73 usages 0x79, 0x7a and 0x7c from the consumer page
correspond to Brightness Up/Down/Toggle keys, so let's add the mappings.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-input.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 693cd19e9dd40..f736bdf774dd8 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -886,6 +886,10 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 		case 0x074: map_key_clear(KEY_BRIGHTNESS_MAX);		break;
 		case 0x075: map_key_clear(KEY_BRIGHTNESS_AUTO);		break;
 
+		case 0x079: map_key_clear(KEY_KBDILLUMUP);	break;
+		case 0x07a: map_key_clear(KEY_KBDILLUMDOWN);	break;
+		case 0x07c: map_key_clear(KEY_KBDILLUMTOGGLE);	break;
+
 		case 0x082: map_key_clear(KEY_VIDEO_NEXT);	break;
 		case 0x083: map_key_clear(KEY_LAST);		break;
 		case 0x084: map_key_clear(KEY_ENTER);		break;
-- 
2.20.1

[PATCH 4.14 011/115] HID: input: add mapping for "Toggle Display" key

[Greg Kroah-Hartman]

[ Upstream commit c01908a14bf735b871170092807c618bb9dae654 ]

According to HUT 1.12 usage 0xb5 from the generic desktop page is reserved
for switching between external and internal display, so let's add the
mapping.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-input.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index f736bdf774dd8..d723185de3ba2 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -677,6 +677,14 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 			break;
 		}
 
+		if ((usage->hid & 0xf0) == 0xb0) {	/* SC - Display */
+			switch (usage->hid & 0xf) {
+			case 0x05: map_key_clear(KEY_SWITCHVIDEOMODE); break;
+			default: goto ignore;
+			}
+			break;
+		}
+
 		/*
 		 * Some lazy vendors declare 255 usages for System Control,
 		 * leading to the creation of ABS_X|Y axis and too many others.
-- 
2.20.1

[PATCH 4.14 012/115] libnvdimm/btt: Fix a kmemdup failure check

[Greg Kroah-Hartman]

[ Upstream commit 486fa92df4707b5df58d6508728bdb9321a59766 ]

In case kmemdup fails, the fix releases resources and returns to
avoid the NULL pointer dereference.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvdimm/btt_devs.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/nvdimm/btt_devs.c b/drivers/nvdimm/btt_devs.c
index d58925295aa79..e610dd890263b 100644
--- a/drivers/nvdimm/btt_devs.c
+++ b/drivers/nvdimm/btt_devs.c
@@ -190,14 +190,15 @@ static struct device *__nd_btt_create(struct nd_region *nd_region,
 		return NULL;
 
 	nd_btt->id = ida_simple_get(&nd_region->btt_ida, 0, 0, GFP_KERNEL);
-	if (nd_btt->id < 0) {
-		kfree(nd_btt);
-		return NULL;
-	}
+	if (nd_btt->id < 0)
+		goto out_nd_btt;
 
 	nd_btt->lbasize = lbasize;
-	if (uuid)
+	if (uuid) {
 		uuid = kmemdup(uuid, 16, GFP_KERNEL);
+		if (!uuid)
+			goto out_put_id;
+	}
 	nd_btt->uuid = uuid;
 	dev = &nd_btt->dev;
 	dev_set_name(dev, "btt%d.%d", nd_region->id, nd_btt->id);
@@ -212,6 +213,13 @@ static struct device *__nd_btt_create(struct nd_region *nd_region,
 		return NULL;
 	}
 	return dev;
+
+out_put_id:
+	ida_simple_remove(&nd_region->btt_ida, nd_btt->id);
+
+out_nd_btt:
+	kfree(nd_btt);
+	return NULL;
 }
 
 struct device *nd_btt_create(struct nd_region *nd_region)
-- 
2.20.1

[PATCH 4.14 013/115] s390/dasd: Fix capacity calculation for large volumes

[Greg Kroah-Hartman]

[ Upstream commit 2cc9637ce825f3a9f51f8f78af7474e9e85bfa5f ]

The DASD driver incorrectly limits the maximum number of blocks of ECKD
DASD volumes to 32 bit numbers. Volumes with a capacity greater than
2^32-1 blocks are incorrectly recognized as smaller volumes.

This results in the following volume capacity limits depending on the
formatted block size:

  BLKSIZE  MAX_GB   MAX_CYL
      512    2047   5843492
     1024    4095   8676701
     2048    8191  13634816
     4096   16383  23860929

The same problem occurs when a volume with more than 17895697 cylinders
is accessed in raw-track-access mode.

Fix this problem by adding an explicit type cast when calculating the
maximum number of blocks.

Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/block/dasd_eckd.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 0a1e7f9b5239d..0d5e2d92e05bc 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -2001,14 +2001,14 @@ static int dasd_eckd_end_analysis(struct dasd_block *block)
 	blk_per_trk = recs_per_track(&private->rdc_data, 0, block->bp_block);
 
 raw:
-	block->blocks = (private->real_cyl *
+	block->blocks = ((unsigned long) private->real_cyl *
 			  private->rdc_data.trk_per_cyl *
 			  blk_per_trk);
 
 	dev_info(&device->cdev->dev,
-		 "DASD with %d KB/block, %d KB total size, %d KB/track, "
+		 "DASD with %u KB/block, %lu KB total size, %u KB/track, "
 		 "%s\n", (block->bp_block >> 10),
-		 ((private->real_cyl *
+		 (((unsigned long) private->real_cyl *
 		   private->rdc_data.trk_per_cyl *
 		   blk_per_trk * (block->bp_block >> 9)) >> 1),
 		 ((blk_per_trk * block->bp_block) >> 10),
-- 
2.20.1

[PATCH 4.14 014/115] mac80211: fix unaligned access in mesh table hash function

[Greg Kroah-Hartman]

[ Upstream commit 40586e3fc400c00c11151804dcdc93f8c831c808 ]

The pointer to the last four bytes of the address is not guaranteed to be
aligned, so we need to use __get_unaligned_cpu32 here

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/mesh_pathtbl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c
index 1ce068865629b..1300220912051 100644
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
@@ -23,7 +23,7 @@ static void mesh_path_free_rcu(struct mesh_table *tbl, struct mesh_path *mpath);
 static u32 mesh_table_hash(const void *addr, u32 len, u32 seed)
 {
 	/* Use last four bytes of hw addr as hash index */
-	return jhash_1word(*(u32 *)(addr+2), seed);
+	return jhash_1word(__get_unaligned_cpu32((u8 *)addr + 2), seed);
 }
 
 static const struct rhashtable_params mesh_rht_params = {
-- 
2.20.1

[PATCH 4.14 015/115] mac80211: Increase MAX_MSG_LEN

[Greg Kroah-Hartman]

[ Upstream commit 78be2d21cc1cd3069c6138dcfecec62583130171 ]

Looks that 100 chars isn't enough for messages, as we keep getting
warnings popping from different places due to message shortening.
Instead of trying to shorten the prints, just increase the buffer size.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/trace_msg.h | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/trace_msg.h b/net/mac80211/trace_msg.h
index 366b9e6f043e2..40141df09f255 100644
--- a/net/mac80211/trace_msg.h
+++ b/net/mac80211/trace_msg.h
@@ -1,4 +1,9 @@
 /* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Portions of this file
+ * Copyright (C) 2019 Intel Corporation
+ */
+
 #ifdef CONFIG_MAC80211_MESSAGE_TRACING
 
 #if !defined(__MAC80211_MSG_DRIVER_TRACE) || defined(TRACE_HEADER_MULTI_READ)
@@ -11,7 +16,7 @@
 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM mac80211_msg
 
-#define MAX_MSG_LEN	100
+#define MAX_MSG_LEN	120
 
 DECLARE_EVENT_CLASS(mac80211_msg_event,
 	TP_PROTO(struct va_format *vaf),
-- 
2.20.1

[PATCH 4.14 016/115] mac80211: fix memory accounting with A-MSDU aggregation

[Greg Kroah-Hartman]

[ Upstream commit eb9b64e3a9f8483e6e54f4e03b2ae14ae5db2690 ]

skb->truesize can change due to memory reallocation or when adding extra
fragments. Adjust fq->memory_usage accordingly

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/tx.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 305a4655f23e1..09c7aa519ca82 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -3125,6 +3125,7 @@ static bool ieee80211_amsdu_aggregate(struct ieee80211_sub_if_data *sdata,
 	u8 max_subframes = sta->sta.max_amsdu_subframes;
 	int max_frags = local->hw.max_tx_fragments;
 	int max_amsdu_len = sta->sta.max_amsdu_len;
+	int orig_truesize;
 	__be16 len;
 	void *data;
 	bool ret = false;
@@ -3158,6 +3159,7 @@ static bool ieee80211_amsdu_aggregate(struct ieee80211_sub_if_data *sdata,
 	if (!head)
 		goto out;
 
+	orig_truesize = head->truesize;
 	orig_len = head->len;
 
 	if (skb->len + head->len > max_amsdu_len)
@@ -3212,6 +3214,7 @@ static bool ieee80211_amsdu_aggregate(struct ieee80211_sub_if_data *sdata,
 	*frag_tail = skb;
 
 out_recalc:
+	fq->memory_usage += head->truesize - orig_truesize;
 	if (head->len != orig_len) {
 		flow->backlog += head->len - orig_len;
 		tin->backlog_bytes += head->len - orig_len;
-- 
2.20.1

[PATCH 4.14 017/115] nl80211: Add NL80211_FLAG_CLEAR_SKB flag for other NL commands

[Greg Kroah-Hartman]

[ Upstream commit d6db02a88a4aaa1cd7105137c67ddec7f3bdbc05 ]

This commit adds NL80211_FLAG_CLEAR_SKB flag to other NL commands
that carry key data to ensure they do not stick around on heap
after the SKB is freed.

Also introduced this flag for NL80211_CMD_VENDOR as there are sub
commands which configure the keys.

Signed-off-by: Sunil Dutt <usdutt@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/nl80211.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 46e9812d13c02..c1a2ad050e617 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -12761,7 +12761,8 @@ static const struct genl_ops nl80211_ops[] = {
 		.policy = nl80211_policy,
 		.flags = GENL_UNS_ADMIN_PERM,
 		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
-				  NL80211_FLAG_NEED_RTNL,
+				  NL80211_FLAG_NEED_RTNL |
+				  NL80211_FLAG_CLEAR_SKB,
 	},
 	{
 		.cmd = NL80211_CMD_DEAUTHENTICATE,
@@ -12812,7 +12813,8 @@ static const struct genl_ops nl80211_ops[] = {
 		.policy = nl80211_policy,
 		.flags = GENL_UNS_ADMIN_PERM,
 		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
-				  NL80211_FLAG_NEED_RTNL,
+				  NL80211_FLAG_NEED_RTNL |
+				  NL80211_FLAG_CLEAR_SKB,
 	},
 	{
 		.cmd = NL80211_CMD_UPDATE_CONNECT_PARAMS,
@@ -12820,7 +12822,8 @@ static const struct genl_ops nl80211_ops[] = {
 		.policy = nl80211_policy,
 		.flags = GENL_ADMIN_PERM,
 		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
-				  NL80211_FLAG_NEED_RTNL,
+				  NL80211_FLAG_NEED_RTNL |
+				  NL80211_FLAG_CLEAR_SKB,
 	},
 	{
 		.cmd = NL80211_CMD_DISCONNECT,
@@ -12849,7 +12852,8 @@ static const struct genl_ops nl80211_ops[] = {
 		.policy = nl80211_policy,
 		.flags = GENL_UNS_ADMIN_PERM,
 		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
-				  NL80211_FLAG_NEED_RTNL,
+				  NL80211_FLAG_NEED_RTNL |
+				  NL80211_FLAG_CLEAR_SKB,
 	},
 	{
 		.cmd = NL80211_CMD_DEL_PMKSA,
@@ -13201,7 +13205,8 @@ static const struct genl_ops nl80211_ops[] = {
 		.policy = nl80211_policy,
 		.flags = GENL_UNS_ADMIN_PERM,
 		.internal_flags = NL80211_FLAG_NEED_WIPHY |
-				  NL80211_FLAG_NEED_RTNL,
+				  NL80211_FLAG_NEED_RTNL |
+				  NL80211_FLAG_CLEAR_SKB,
 	},
 	{
 		.cmd = NL80211_CMD_SET_QOS_MAP,
@@ -13256,7 +13261,8 @@ static const struct genl_ops nl80211_ops[] = {
 		.doit = nl80211_set_pmk,
 		.policy = nl80211_policy,
 		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
-				  NL80211_FLAG_NEED_RTNL,
+				  NL80211_FLAG_NEED_RTNL |
+				  NL80211_FLAG_CLEAR_SKB,
 	},
 	{
 		.cmd = NL80211_CMD_DEL_PMK,
-- 
2.20.1

[PATCH 4.14 018/115] s390/3270: fix lockdep false positive on view->lock

[Greg Kroah-Hartman]

[ Upstream commit 5712f3301a12c0c3de9cc423484496b0464f2faf ]

The spinlock in the raw3270_view structure is used by con3270, tty3270
and fs3270 in different ways. For con3270 the lock can be acquired in
irq context, for tty3270 and fs3270 the highest context is bh.

Lockdep sees the view->lock as a single class and if the 3270 driver
is used for the console the following message is generated:

WARNING: inconsistent lock state
5.1.0-rc3-05157-g5c168033979d #12 Not tainted
--------------------------------
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
swapper/0/1 [HC0[0]:SC1[1]:HE1:SE0] takes:
(____ptrval____) (&(&view->lock)->rlock){?.-.}, at: tty3270_update+0x7c/0x330

Introduce a lockdep subclass for the view lock to distinguish bh from
irq locks.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/char/con3270.c | 2 +-
 drivers/s390/char/fs3270.c  | 3 ++-
 drivers/s390/char/raw3270.c | 3 ++-
 drivers/s390/char/raw3270.h | 4 +++-
 drivers/s390/char/tty3270.c | 3 ++-
 5 files changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/s390/char/con3270.c b/drivers/s390/char/con3270.c
index be3e3c1206c24..1868ff803f439 100644
--- a/drivers/s390/char/con3270.c
+++ b/drivers/s390/char/con3270.c
@@ -629,7 +629,7 @@ con3270_init(void)
 		     (void (*)(unsigned long)) con3270_read_tasklet,
 		     (unsigned long) condev->read);
 
-	raw3270_add_view(&condev->view, &con3270_fn, 1);
+	raw3270_add_view(&condev->view, &con3270_fn, 1, RAW3270_VIEW_LOCK_IRQ);
 
 	INIT_LIST_HEAD(&condev->freemem);
 	for (i = 0; i < CON3270_STRING_PAGES; i++) {
diff --git a/drivers/s390/char/fs3270.c b/drivers/s390/char/fs3270.c
index c4518168fd02c..4f73a38c7cbd2 100644
--- a/drivers/s390/char/fs3270.c
+++ b/drivers/s390/char/fs3270.c
@@ -463,7 +463,8 @@ fs3270_open(struct inode *inode, struct file *filp)
 
 	init_waitqueue_head(&fp->wait);
 	fp->fs_pid = get_pid(task_pid(current));
-	rc = raw3270_add_view(&fp->view, &fs3270_fn, minor);
+	rc = raw3270_add_view(&fp->view, &fs3270_fn, minor,
+			      RAW3270_VIEW_LOCK_BH);
 	if (rc) {
 		fs3270_free_view(&fp->view);
 		goto out;
diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c
index 5d4f053d7c38c..0f47fec35acc0 100644
--- a/drivers/s390/char/raw3270.c
+++ b/drivers/s390/char/raw3270.c
@@ -919,7 +919,7 @@ raw3270_deactivate_view(struct raw3270_view *view)
  * Add view to device with minor "minor".
  */
 int
-raw3270_add_view(struct raw3270_view *view, struct raw3270_fn *fn, int minor)
+raw3270_add_view(struct raw3270_view *view, struct raw3270_fn *fn, int minor, int subclass)
 {
 	unsigned long flags;
 	struct raw3270 *rp;
@@ -941,6 +941,7 @@ raw3270_add_view(struct raw3270_view *view, struct raw3270_fn *fn, int minor)
 		view->cols = rp->cols;
 		view->ascebc = rp->ascebc;
 		spin_lock_init(&view->lock);
+		lockdep_set_subclass(&view->lock, subclass);
 		list_add(&view->list, &rp->view_list);
 		rc = 0;
 		spin_unlock_irqrestore(get_ccwdev_lock(rp->cdev), flags);
diff --git a/drivers/s390/char/raw3270.h b/drivers/s390/char/raw3270.h
index 114ca7cbf8897..3afaa35f73513 100644
--- a/drivers/s390/char/raw3270.h
+++ b/drivers/s390/char/raw3270.h
@@ -150,6 +150,8 @@ struct raw3270_fn {
 struct raw3270_view {
 	struct list_head list;
 	spinlock_t lock;
+#define RAW3270_VIEW_LOCK_IRQ	0
+#define RAW3270_VIEW_LOCK_BH	1
 	atomic_t ref_count;
 	struct raw3270 *dev;
 	struct raw3270_fn *fn;
@@ -158,7 +160,7 @@ struct raw3270_view {
 	unsigned char *ascebc;		/* ascii -> ebcdic table */
 };
 
-int raw3270_add_view(struct raw3270_view *, struct raw3270_fn *, int);
+int raw3270_add_view(struct raw3270_view *, struct raw3270_fn *, int, int);
 int raw3270_activate_view(struct raw3270_view *);
 void raw3270_del_view(struct raw3270_view *);
 void raw3270_deactivate_view(struct raw3270_view *);
diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c
index e5ebe2fbee235..401688bf8fd37 100644
--- a/drivers/s390/char/tty3270.c
+++ b/drivers/s390/char/tty3270.c
@@ -978,7 +978,8 @@ static int tty3270_install(struct tty_driver *driver, struct tty_struct *tty)
 		return PTR_ERR(tp);
 
 	rc = raw3270_add_view(&tp->view, &tty3270_fn,
-			      tty->index + RAW3270_FIRSTMINOR);
+			      tty->index + RAW3270_FIRSTMINOR,
+			      RAW3270_VIEW_LOCK_BH);
 	if (rc) {
 		tty3270_free_view(tp);
 		return rc;
-- 
2.20.1

[PATCH 4.14 019/115] clocksource/drivers/oxnas: Fix OX820 compatible

[Greg Kroah-Hartman]

[ Upstream commit fbc87aa0f7c429999dc31f1bac3b2615008cac32 ]

The OX820 compatible is wrong is the driver, fix it.

Fixes: 2ea3401e2a84 ("clocksource/drivers/oxnas: Add OX820 compatible")
Reported-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clocksource/timer-oxnas-rps.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clocksource/timer-oxnas-rps.c b/drivers/clocksource/timer-oxnas-rps.c
index eed6feff8b5f2..30c6f4ce672b3 100644
--- a/drivers/clocksource/timer-oxnas-rps.c
+++ b/drivers/clocksource/timer-oxnas-rps.c
@@ -296,4 +296,4 @@ static int __init oxnas_rps_timer_init(struct device_node *np)
 TIMER_OF_DECLARE(ox810se_rps,
 		       "oxsemi,ox810se-rps-timer", oxnas_rps_timer_init);
 TIMER_OF_DECLARE(ox820_rps,
-		       "oxsemi,ox820se-rps-timer", oxnas_rps_timer_init);
+		       "oxsemi,ox820-rps-timer", oxnas_rps_timer_init);
-- 
2.20.1

[PATCH 4.14 020/115] mISDN: Check address length before reading address family

[Greg Kroah-Hartman]

[ Upstream commit 238ffdc49ef98b15819cfd5e3fb23194e3ea3d39 ]

KMSAN will complain if valid address length passed to bind() is shorter
than sizeof("struct sockaddr_mISDN"->family) bytes.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/mISDN/socket.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/isdn/mISDN/socket.c b/drivers/isdn/mISDN/socket.c
index c5603d1a07d6e..65cb4aac8dce7 100644
--- a/drivers/isdn/mISDN/socket.c
+++ b/drivers/isdn/mISDN/socket.c
@@ -712,10 +712,10 @@ base_sock_bind(struct socket *sock, struct sockaddr *addr, int addr_len)
 	struct sock *sk = sock->sk;
 	int err = 0;
 
-	if (!maddr || maddr->family != AF_ISDN)
+	if (addr_len < sizeof(struct sockaddr_mISDN))
 		return -EINVAL;
 
-	if (addr_len < sizeof(struct sockaddr_mISDN))
+	if (!maddr || maddr->family != AF_ISDN)
 		return -EINVAL;
 
 	lock_sock(sk);
-- 
2.20.1

[PATCH 4.14 021/115] s390/pkey: add one more argument space for debug feature entry

[Greg Kroah-Hartman]

[ Upstream commit 6b1f16ba730d4c0cda1247568c3a1bf4fa3a2f2f ]

The debug feature entries have been used with up to 5 arguents
(including the pointer to the format string) but there was only
space reserved for 4 arguemnts. So now the registration does
reserve space for 5 times a long value.

This fixes a sometime appearing weired value as the last
value of an debug feature entry like this:

... pkey_sec2protkey zcrypt_send_cprb (cardnr=10 domain=12)
   failed with errno -2143346254

Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reported-by: Christian Rund <Christian.Rund@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/crypto/pkey_api.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/s390/crypto/pkey_api.c b/drivers/s390/crypto/pkey_api.c
index f61fa47135a6c..bd0376dc7e1e3 100644
--- a/drivers/s390/crypto/pkey_api.c
+++ b/drivers/s390/crypto/pkey_api.c
@@ -49,7 +49,8 @@ static debug_info_t *debug_info;
 
 static void __init pkey_debug_init(void)
 {
-	debug_info = debug_register("pkey", 1, 1, 4 * sizeof(long));
+	/* 5 arguments per dbf entry (including the format string ptr) */
+	debug_info = debug_register("pkey", 1, 1, 5 * sizeof(long));
 	debug_register_view(debug_info, &debug_sprintf_view);
 	debug_set_level(debug_info, 3);
 }
-- 
2.20.1

[PATCH 4.14 022/115] x86/reboot, efi: Use EFI reboot for Acer TravelMate X514-51T

[Greg Kroah-Hartman]

[ Upstream commit 0082517fa4bce073e7cf542633439f26538a14cc ]

Upon reboot, the Acer TravelMate X514-51T laptop appears to complete the
shutdown process, but then it hangs in BIOS POST with a black screen.

The problem is intermittent - at some points it has appeared related to
Secure Boot settings or different kernel builds, but ultimately we have
not been able to identify the exact conditions that trigger the issue to
come and go.

Besides, the EFI mode cannot be disabled in the BIOS of this model.

However, after extensive testing, we observe that using the EFI reboot
method reliably avoids the issue in all cases.

So add a boot time quirk to use EFI reboot on such systems.

Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=203119
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Cc: linux@endlessm.com
Link: http://lkml.kernel.org/r/20190412080152.3718-1-jian-hong@endlessm.com
[ Fix !CONFIG_EFI build failure, clarify the code and the changelog a bit. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/reboot.c | 21 +++++++++++++++++++++
 include/linux/efi.h      |  7 ++++++-
 2 files changed, 27 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 2126b9d27c340..c663d5fcff2ee 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -81,6 +81,19 @@ static int __init set_bios_reboot(const struct dmi_system_id *d)
 	return 0;
 }
 
+/*
+ * Some machines don't handle the default ACPI reboot method and
+ * require the EFI reboot method:
+ */
+static int __init set_efi_reboot(const struct dmi_system_id *d)
+{
+	if (reboot_type != BOOT_EFI && !efi_runtime_disabled()) {
+		reboot_type = BOOT_EFI;
+		pr_info("%s series board detected. Selecting EFI-method for reboot.\n", d->ident);
+	}
+	return 0;
+}
+
 void __noreturn machine_real_restart(unsigned int type)
 {
 	local_irq_disable();
@@ -166,6 +179,14 @@ static const struct dmi_system_id reboot_dmi_table[] __initconst = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "AOA110"),
 		},
 	},
+	{	/* Handle reboot issue on Acer TravelMate X514-51T */
+		.callback = set_efi_reboot,
+		.ident = "Acer TravelMate X514-51T",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate X514-51T"),
+		},
+	},
 
 	/* Apple */
 	{	/* Handle problems with rebooting on Apple MacBook5 */
diff --git a/include/linux/efi.h b/include/linux/efi.h
index b68b7d199feea..2dab158b74c45 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -1518,7 +1518,12 @@ efi_status_t efi_setup_gop(efi_system_table_t *sys_table_arg,
 			   struct screen_info *si, efi_guid_t *proto,
 			   unsigned long size);
 
-bool efi_runtime_disabled(void);
+#ifdef CONFIG_EFI
+extern bool efi_runtime_disabled(void);
+#else
+static inline bool efi_runtime_disabled(void) { return true; }
+#endif
+
 extern void efi_call_virt_check_flags(unsigned long flags, const char *call);
 
 enum efi_secureboot_mode {
-- 
2.20.1

[PATCH 4.14 023/115] KVM: fix spectrev1 gadgets

[Greg Kroah-Hartman]

[ Upstream commit 1d487e9bf8ba66a7174c56a0029c54b1eca8f99c ]

These were found with smatch, and then generalized when applicable.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/lapic.c     |  4 +++-
 include/linux/kvm_host.h | 10 ++++++----
 virt/kvm/irqchip.c       |  5 +++--
 virt/kvm/kvm_main.c      |  6 ++++--
 4 files changed, 16 insertions(+), 9 deletions(-)

diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index f7c34184342a5..053e4937af0cb 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -133,6 +133,7 @@ static inline bool kvm_apic_map_get_logical_dest(struct kvm_apic_map *map,
 		if (offset <= max_apic_id) {
 			u8 cluster_size = min(max_apic_id - offset + 1, 16U);
 
+			offset = array_index_nospec(offset, map->max_apic_id + 1);
 			*cluster = &map->phys_map[offset];
 			*mask = dest_id & (0xffff >> (16 - cluster_size));
 		} else {
@@ -829,7 +830,8 @@ static inline bool kvm_apic_map_get_dest_lapic(struct kvm *kvm,
 		if (irq->dest_id > map->max_apic_id) {
 			*bitmap = 0;
 		} else {
-			*dst = &map->phys_map[irq->dest_id];
+			u32 dest_id = array_index_nospec(irq->dest_id, map->max_apic_id + 1);
+			*dst = &map->phys_map[dest_id];
 			*bitmap = 1;
 		}
 		return true;
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index 753c16633bac5..026615e242d8e 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -27,6 +27,7 @@
 #include <linux/irqbypass.h>
 #include <linux/swait.h>
 #include <linux/refcount.h>
+#include <linux/nospec.h>
 #include <asm/signal.h>
 
 #include <linux/kvm.h>
@@ -483,10 +484,10 @@ static inline struct kvm_io_bus *kvm_get_bus(struct kvm *kvm, enum kvm_bus idx)
 
 static inline struct kvm_vcpu *kvm_get_vcpu(struct kvm *kvm, int i)
 {
-	/* Pairs with smp_wmb() in kvm_vm_ioctl_create_vcpu, in case
-	 * the caller has read kvm->online_vcpus before (as is the case
-	 * for kvm_for_each_vcpu, for example).
-	 */
+	int num_vcpus = atomic_read(&kvm->online_vcpus);
+	i = array_index_nospec(i, num_vcpus);
+
+	/* Pairs with smp_wmb() in kvm_vm_ioctl_create_vcpu.  */
 	smp_rmb();
 	return kvm->vcpus[i];
 }
@@ -570,6 +571,7 @@ void kvm_put_kvm(struct kvm *kvm);
 
 static inline struct kvm_memslots *__kvm_memslots(struct kvm *kvm, int as_id)
 {
+	as_id = array_index_nospec(as_id, KVM_ADDRESS_SPACE_NUM);
 	return srcu_dereference_check(kvm->memslots[as_id], &kvm->srcu,
 			lockdep_is_held(&kvm->slots_lock) ||
 			!refcount_read(&kvm->users_count));
diff --git a/virt/kvm/irqchip.c b/virt/kvm/irqchip.c
index b1286c4e07122..0bd0683640bdf 100644
--- a/virt/kvm/irqchip.c
+++ b/virt/kvm/irqchip.c
@@ -144,18 +144,19 @@ static int setup_routing_entry(struct kvm *kvm,
 {
 	struct kvm_kernel_irq_routing_entry *ei;
 	int r;
+	u32 gsi = array_index_nospec(ue->gsi, KVM_MAX_IRQ_ROUTES);
 
 	/*
 	 * Do not allow GSI to be mapped to the same irqchip more than once.
 	 * Allow only one to one mapping between GSI and non-irqchip routing.
 	 */
-	hlist_for_each_entry(ei, &rt->map[ue->gsi], link)
+	hlist_for_each_entry(ei, &rt->map[gsi], link)
 		if (ei->type != KVM_IRQ_ROUTING_IRQCHIP ||
 		    ue->type != KVM_IRQ_ROUTING_IRQCHIP ||
 		    ue->u.irqchip.irqchip == ei->irqchip.irqchip)
 			return -EINVAL;
 
-	e->gsi = ue->gsi;
+	e->gsi = gsi;
 	e->type = ue->type;
 	r = kvm_set_routing_entry(kvm, e, ue);
 	if (r)
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index a373c60ef1c06..b91716b1b428e 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -2886,12 +2886,14 @@ static int kvm_ioctl_create_device(struct kvm *kvm,
 	struct kvm_device_ops *ops = NULL;
 	struct kvm_device *dev;
 	bool test = cd->flags & KVM_CREATE_DEVICE_TEST;
+	int type;
 	int ret;
 
 	if (cd->type >= ARRAY_SIZE(kvm_device_ops_table))
 		return -ENODEV;
 
-	ops = kvm_device_ops_table[cd->type];
+	type = array_index_nospec(cd->type, ARRAY_SIZE(kvm_device_ops_table));
+	ops = kvm_device_ops_table[type];
 	if (ops == NULL)
 		return -ENODEV;
 
@@ -2906,7 +2908,7 @@ static int kvm_ioctl_create_device(struct kvm *kvm,
 	dev->kvm = kvm;
 
 	mutex_lock(&kvm->lock);
-	ret = ops->create(dev, cd->type);
+	ret = ops->create(dev, type);
 	if (ret < 0) {
 		mutex_unlock(&kvm->lock);
 		kfree(dev);
-- 
2.20.1

[PATCH 4.14 024/115] KVM: x86: avoid misreporting level-triggered irqs as edge-triggered in tracing

[Greg Kroah-Hartman]

[ Upstream commit 7a223e06b1a411cef6c4cd7a9b9a33c8d225b10e ]

In __apic_accept_irq() interface trig_mode is int and actually on some code
paths it is set above u8:

kvm_apic_set_irq() extracts it from 'struct kvm_lapic_irq' where trig_mode
is u16. This is done on purpose as e.g. kvm_set_msi_irq() sets it to
(1 << 15) & e->msi.data

kvm_apic_local_deliver sets it to reg & (1 << 15).

Fix the immediate issue by making 'tm' into u16. We may also want to adjust
__apic_accept_irq() interface and use proper sizes for vector, level,
trig_mode but this is not urgent.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/trace.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kvm/trace.h b/arch/x86/kvm/trace.h
index 9807c314c4788..3bf41413ab151 100644
--- a/arch/x86/kvm/trace.h
+++ b/arch/x86/kvm/trace.h
@@ -438,13 +438,13 @@ TRACE_EVENT(kvm_apic_ipi,
 );
 
 TRACE_EVENT(kvm_apic_accept_irq,
-	    TP_PROTO(__u32 apicid, __u16 dm, __u8 tm, __u8 vec),
+	    TP_PROTO(__u32 apicid, __u16 dm, __u16 tm, __u8 vec),
 	    TP_ARGS(apicid, dm, tm, vec),
 
 	TP_STRUCT__entry(
 		__field(	__u32,		apicid		)
 		__field(	__u16,		dm		)
-		__field(	__u8,		tm		)
+		__field(	__u16,		tm		)
 		__field(	__u8,		vec		)
 	),
 
-- 
2.20.1

[PATCH 4.14 025/115] tools lib traceevent: Fix missing equality check for strcmp

[Greg Kroah-Hartman]

[ Upstream commit f32c2877bcb068a718bb70094cd59ccc29d4d082 ]

There was a missing comparison with 0 when checking if type is "s64" or
"u64". Therefore, the body of the if-statement was entered if "type" was
"u64" or not "s64", which made the first strcmp() redundant since if
type is "u64", it's not "s64".

If type is "s64", the body of the if-statement is not entered but since
the remainder of the function consists of if-statements which will not
be entered if type is "s64", we will just return "val", which is
correct, albeit at the cost of a few more calls to strcmp(), i.e., it
will behave just as if the if-statement was entered.

If type is neither "s64" or "u64", the body of the if-statement will be
entered incorrectly and "val" returned. This means that any type that is
checked after "s64" and "u64" is handled the same way as "s64" and
"u64", i.e., the limiting of "val" to fit in for example "s8" is never
reached.

This was introduced in the kernel tree when the sources were copied from
trace-cmd in commit f7d82350e597 ("tools/events: Add files to create
libtraceevent.a"), and in the trace-cmd repo in 1cdbae6035cei
("Implement typecasting in parser") when the function was introduced,
i.e., it has always behaved the wrong way.

Detected by cppcheck.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Fixes: f7d82350e597 ("tools/events: Add files to create libtraceevent.a")
Link: http://lkml.kernel.org/r/20190409091529.2686-1-rikard.falkeborn@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/traceevent/event-parse.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c
index 3955ba9e6fcb5..7989dd6289e7a 100644
--- a/tools/lib/traceevent/event-parse.c
+++ b/tools/lib/traceevent/event-parse.c
@@ -2206,7 +2206,7 @@ eval_type_str(unsigned long long val, const char *type, int pointer)
 		return val & 0xffffffff;
 
 	if (strcmp(type, "u64") == 0 ||
-	    strcmp(type, "s64"))
+	    strcmp(type, "s64") == 0)
 		return val;
 
 	if (strcmp(type, "s8") == 0)
-- 
2.20.1

[PATCH 4.14 026/115] mm: fix inactive list balancing between NUMA nodes and cgroups

[Greg Kroah-Hartman]

[ Upstream commit 3b991208b897f52507168374033771a984b947b1 ]

During !CONFIG_CGROUP reclaim, we expand the inactive list size if it's
thrashing on the node that is about to be reclaimed.  But when cgroups
are enabled, we suddenly ignore the node scope and use the cgroup scope
only.  The result is that pressure bleeds between NUMA nodes depending
on whether cgroups are merely compiled into Linux.  This behavioral
difference is unexpected and undesirable.

When the refault adaptivity of the inactive list was first introduced,
there were no statistics at the lruvec level - the intersection of node
and memcg - so it was better than nothing.

But now that we have that infrastructure, use lruvec_page_state() to
make the list balancing decision always NUMA aware.

[hannes@cmpxchg.org: fix bisection hole]
  Link: http://lkml.kernel.org/r/20190417155241.GB23013@cmpxchg.org
Link: http://lkml.kernel.org/r/20190412144438.2645-1-hannes@cmpxchg.org
Fixes: 2a2e48854d70 ("mm: vmscan: fix IO/refault regression in cache workingset transition")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/vmscan.c | 29 +++++++++--------------------
 1 file changed, 9 insertions(+), 20 deletions(-)

diff --git a/mm/vmscan.c b/mm/vmscan.c
index 99837e931f531..7b140c967bca6 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -2120,7 +2120,6 @@ static void shrink_active_list(unsigned long nr_to_scan,
  *   10TB     320        32GB
  */
 static bool inactive_list_is_low(struct lruvec *lruvec, bool file,
-				 struct mem_cgroup *memcg,
 				 struct scan_control *sc, bool actual_reclaim)
 {
 	enum lru_list active_lru = file * LRU_FILE + LRU_ACTIVE;
@@ -2141,16 +2140,12 @@ static bool inactive_list_is_low(struct lruvec *lruvec, bool file,
 	inactive = lruvec_lru_size(lruvec, inactive_lru, sc->reclaim_idx);
 	active = lruvec_lru_size(lruvec, active_lru, sc->reclaim_idx);
 
-	if (memcg)
-		refaults = memcg_page_state(memcg, WORKINGSET_ACTIVATE);
-	else
-		refaults = node_page_state(pgdat, WORKINGSET_ACTIVATE);
-
 	/*
 	 * When refaults are being observed, it means a new workingset
 	 * is being established. Disable active list protection to get
 	 * rid of the stale workingset quickly.
 	 */
+	refaults = lruvec_page_state(lruvec, WORKINGSET_ACTIVATE);
 	if (file && actual_reclaim && lruvec->refaults != refaults) {
 		inactive_ratio = 0;
 	} else {
@@ -2171,12 +2166,10 @@ static bool inactive_list_is_low(struct lruvec *lruvec, bool file,
 }
 
 static unsigned long shrink_list(enum lru_list lru, unsigned long nr_to_scan,
-				 struct lruvec *lruvec, struct mem_cgroup *memcg,
-				 struct scan_control *sc)
+				 struct lruvec *lruvec, struct scan_control *sc)
 {
 	if (is_active_lru(lru)) {
-		if (inactive_list_is_low(lruvec, is_file_lru(lru),
-					 memcg, sc, true))
+		if (inactive_list_is_low(lruvec, is_file_lru(lru), sc, true))
 			shrink_active_list(nr_to_scan, lruvec, sc, lru);
 		return 0;
 	}
@@ -2276,7 +2269,7 @@ static void get_scan_count(struct lruvec *lruvec, struct mem_cgroup *memcg,
 			 * anonymous pages on the LRU in eligible zones.
 			 * Otherwise, the small LRU gets thrashed.
 			 */
-			if (!inactive_list_is_low(lruvec, false, memcg, sc, false) &&
+			if (!inactive_list_is_low(lruvec, false, sc, false) &&
 			    lruvec_lru_size(lruvec, LRU_INACTIVE_ANON, sc->reclaim_idx)
 					>> sc->priority) {
 				scan_balance = SCAN_ANON;
@@ -2294,7 +2287,7 @@ static void get_scan_count(struct lruvec *lruvec, struct mem_cgroup *memcg,
 	 * lruvec even if it has plenty of old anonymous pages unless the
 	 * system is under heavy pressure.
 	 */
-	if (!inactive_list_is_low(lruvec, true, memcg, sc, false) &&
+	if (!inactive_list_is_low(lruvec, true, sc, false) &&
 	    lruvec_lru_size(lruvec, LRU_INACTIVE_FILE, sc->reclaim_idx) >> sc->priority) {
 		scan_balance = SCAN_FILE;
 		goto out;
@@ -2447,7 +2440,7 @@ static void shrink_node_memcg(struct pglist_data *pgdat, struct mem_cgroup *memc
 				nr[lru] -= nr_to_scan;
 
 				nr_reclaimed += shrink_list(lru, nr_to_scan,
-							    lruvec, memcg, sc);
+							    lruvec, sc);
 			}
 		}
 
@@ -2514,7 +2507,7 @@ static void shrink_node_memcg(struct pglist_data *pgdat, struct mem_cgroup *memc
 	 * Even if we did not try to evict anon pages at all, we want to
 	 * rebalance the anon lru active/inactive ratio.
 	 */
-	if (inactive_list_is_low(lruvec, false, memcg, sc, true))
+	if (inactive_list_is_low(lruvec, false, sc, true))
 		shrink_active_list(SWAP_CLUSTER_MAX, lruvec,
 				   sc, LRU_ACTIVE_ANON);
 }
@@ -2839,12 +2832,8 @@ static void snapshot_refaults(struct mem_cgroup *root_memcg, pg_data_t *pgdat)
 		unsigned long refaults;
 		struct lruvec *lruvec;
 
-		if (memcg)
-			refaults = memcg_page_state(memcg, WORKINGSET_ACTIVATE);
-		else
-			refaults = node_page_state(pgdat, WORKINGSET_ACTIVATE);
-
 		lruvec = mem_cgroup_lruvec(pgdat, memcg);
+		refaults = lruvec_page_state(lruvec, WORKINGSET_ACTIVATE);
 		lruvec->refaults = refaults;
 	} while ((memcg = mem_cgroup_iter(root_memcg, memcg, NULL)));
 }
@@ -3192,7 +3181,7 @@ static void age_active_anon(struct pglist_data *pgdat,
 	do {
 		struct lruvec *lruvec = mem_cgroup_lruvec(pgdat, memcg);
 
-		if (inactive_list_is_low(lruvec, false, memcg, sc, true))
+		if (inactive_list_is_low(lruvec, false, sc, true))
 			shrink_active_list(SWAP_CLUSTER_MAX, lruvec,
 					   sc, LRU_ACTIVE_ANON);
 
-- 
2.20.1

[PATCH 4.14 027/115] init: initialize jump labels before command line option parsing

[Greg Kroah-Hartman]

[ Upstream commit 6041186a32585fc7a1d0f6cfe2f138b05fdc3c82 ]

When a module option, or core kernel argument, toggles a static-key it
requires jump labels to be initialized early.  While x86, PowerPC, and
ARM64 arrange for jump_label_init() to be called before parse_args(),
ARM does not.

  Kernel command line: rdinit=/sbin/init page_alloc.shuffle=1 panic=-1 console=ttyAMA0,115200 page_alloc.shuffle=1
  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 0 at ./include/linux/jump_label.h:303
  page_alloc_shuffle+0x12c/0x1ac
  static_key_enable(): static key 'page_alloc_shuffle_key+0x0/0x4' used
  before call to jump_label_init()
  Modules linked in:
  CPU: 0 PID: 0 Comm: swapper Not tainted
  5.1.0-rc4-next-20190410-00003-g3367c36ce744 #1
  Hardware name: ARM Integrator/CP (Device Tree)
  [<c0011c68>] (unwind_backtrace) from [<c000ec48>] (show_stack+0x10/0x18)
  [<c000ec48>] (show_stack) from [<c07e9710>] (dump_stack+0x18/0x24)
  [<c07e9710>] (dump_stack) from [<c001bb1c>] (__warn+0xe0/0x108)
  [<c001bb1c>] (__warn) from [<c001bb88>] (warn_slowpath_fmt+0x44/0x6c)
  [<c001bb88>] (warn_slowpath_fmt) from [<c0b0c4a8>]
  (page_alloc_shuffle+0x12c/0x1ac)
  [<c0b0c4a8>] (page_alloc_shuffle) from [<c0b0c550>] (shuffle_store+0x28/0x48)
  [<c0b0c550>] (shuffle_store) from [<c003e6a0>] (parse_args+0x1f4/0x350)
  [<c003e6a0>] (parse_args) from [<c0ac3c00>] (start_kernel+0x1c0/0x488)

Move the fallback call to jump_label_init() to occur before
parse_args().

The redundant calls to jump_label_init() in other archs are left intact
in case they have static key toggling use cases that are even earlier
than option parsing.

Link: http://lkml.kernel.org/r/155544804466.1032396.13418949511615676665.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Guenter Roeck <groeck@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Russell King <rmk@armlinux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 init/main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/init/main.c b/init/main.c
index 3d3d79c5a2324..51067e2db509d 100644
--- a/init/main.c
+++ b/init/main.c
@@ -550,6 +550,8 @@ asmlinkage __visible void __init start_kernel(void)
 	page_alloc_init();
 
 	pr_notice("Kernel command line: %s\n", boot_command_line);
+	/* parameters may set static keys */
+	jump_label_init();
 	parse_early_param();
 	after_dashes = parse_args("Booting kernel",
 				  static_command_line, __start___param,
@@ -559,8 +561,6 @@ asmlinkage __visible void __init start_kernel(void)
 		parse_args("Setting init args", after_dashes, NULL, 0, -1, -1,
 			   NULL, set_init_arg);
 
-	jump_label_init();
-
 	/*
 	 * These use large bootmem allocations and must precede
 	 * kmem_cache_init()
-- 
2.20.1

[PATCH 4.14 028/115] selftests: netfilter: check icmp pkttoobig errors are set as related

[Greg Kroah-Hartman]

[ Upstream commit becf2319f320cae43e20cf179cc51a355a0deb5f ]

When an icmp error such as pkttoobig is received, conntrack checks
if the "inner" header (header of packet that did not fit link mtu)
is matches an existing connection, and, if so, sets that packet as
being related to the conntrack entry it found.

It was recently reported that this "related" setting also works
if the inner header is from another, different connection (i.e.,
artificial/forged icmp error).

Add a test, followup patch will add additional "inner dst matches
outer dst in reverse direction" check before setting related state.

Link: https://www.synacktiv.com/posts/systems/icmp-reachable.html
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/netfilter/Makefile    |   2 +-
 .../netfilter/conntrack_icmp_related.sh       | 283 ++++++++++++++++++
 2 files changed, 284 insertions(+), 1 deletion(-)
 create mode 100755 tools/testing/selftests/netfilter/conntrack_icmp_related.sh

diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile
index c9ff2b47bd1ca..a37cb1192c6a6 100644
--- a/tools/testing/selftests/netfilter/Makefile
+++ b/tools/testing/selftests/netfilter/Makefile
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 # Makefile for netfilter selftests
 
-TEST_PROGS := nft_trans_stress.sh nft_nat.sh
+TEST_PROGS := nft_trans_stress.sh nft_nat.sh conntrack_icmp_related.sh
 
 include ../lib.mk
diff --git a/tools/testing/selftests/netfilter/conntrack_icmp_related.sh b/tools/testing/selftests/netfilter/conntrack_icmp_related.sh
new file mode 100755
index 0000000000000..b48e1833bc896
--- /dev/null
+++ b/tools/testing/selftests/netfilter/conntrack_icmp_related.sh
@@ -0,0 +1,283 @@
+#!/bin/bash
+#
+# check that ICMP df-needed/pkttoobig icmp are set are set as related
+# state
+#
+# Setup is:
+#
+# nsclient1 -> nsrouter1 -> nsrouter2 -> nsclient2
+# MTU 1500, except for nsrouter2 <-> nsclient2 link (1280).
+# ping nsclient2 from nsclient1, checking that conntrack did set RELATED
+# 'fragmentation needed' icmp packet.
+#
+# In addition, nsrouter1 will perform IP masquerading, i.e. also
+# check the icmp errors are propagated to the correct host as per
+# nat of "established" icmp-echo "connection".
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+ret=0
+
+nft --version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without nft tool"
+	exit $ksft_skip
+fi
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+cleanup() {
+	for i in 1 2;do ip netns del nsclient$i;done
+	for i in 1 2;do ip netns del nsrouter$i;done
+}
+
+ipv4() {
+    echo -n 192.168.$1.2
+}
+
+ipv6 () {
+    echo -n dead:$1::2
+}
+
+check_counter()
+{
+	ns=$1
+	name=$2
+	expect=$3
+	local lret=0
+
+	cnt=$(ip netns exec $ns nft list counter inet filter "$name" | grep -q "$expect")
+	if [ $? -ne 0 ]; then
+		echo "ERROR: counter $name in $ns has unexpected value (expected $expect)" 1>&2
+		ip netns exec $ns nft list counter inet filter "$name" 1>&2
+		lret=1
+	fi
+
+	return $lret
+}
+
+check_unknown()
+{
+	expect="packets 0 bytes 0"
+	for n in nsclient1 nsclient2 nsrouter1 nsrouter2; do
+		check_counter $n "unknown" "$expect"
+		if [ $? -ne 0 ] ;then
+			return 1
+		fi
+	done
+
+	return 0
+}
+
+for n in nsclient1 nsclient2 nsrouter1 nsrouter2; do
+  ip netns add $n
+  ip -net $n link set lo up
+done
+
+DEV=veth0
+ip link add $DEV netns nsclient1 type veth peer name eth1 netns nsrouter1
+DEV=veth0
+ip link add $DEV netns nsclient2 type veth peer name eth1 netns nsrouter2
+
+DEV=veth0
+ip link add $DEV netns nsrouter1 type veth peer name eth2 netns nsrouter2
+
+DEV=veth0
+for i in 1 2; do
+    ip -net nsclient$i link set $DEV up
+    ip -net nsclient$i addr add $(ipv4 $i)/24 dev $DEV
+    ip -net nsclient$i addr add $(ipv6 $i)/64 dev $DEV
+done
+
+ip -net nsrouter1 link set eth1 up
+ip -net nsrouter1 link set veth0 up
+
+ip -net nsrouter2 link set eth1 up
+ip -net nsrouter2 link set eth2 up
+
+ip -net nsclient1 route add default via 192.168.1.1
+ip -net nsclient1 -6 route add default via dead:1::1
+
+ip -net nsclient2 route add default via 192.168.2.1
+ip -net nsclient2 route add default via dead:2::1
+
+i=3
+ip -net nsrouter1 addr add 192.168.1.1/24 dev eth1
+ip -net nsrouter1 addr add 192.168.3.1/24 dev veth0
+ip -net nsrouter1 addr add dead:1::1/64 dev eth1
+ip -net nsrouter1 addr add dead:3::1/64 dev veth0
+ip -net nsrouter1 route add default via 192.168.3.10
+ip -net nsrouter1 -6 route add default via dead:3::10
+
+ip -net nsrouter2 addr add 192.168.2.1/24 dev eth1
+ip -net nsrouter2 addr add 192.168.3.10/24 dev eth2
+ip -net nsrouter2 addr add dead:2::1/64 dev eth1
+ip -net nsrouter2 addr add dead:3::10/64 dev eth2
+ip -net nsrouter2 route add default via 192.168.3.1
+ip -net nsrouter2 route add default via dead:3::1
+
+sleep 2
+for i in 4 6; do
+	ip netns exec nsrouter1 sysctl -q net.ipv$i.conf.all.forwarding=1
+	ip netns exec nsrouter2 sysctl -q net.ipv$i.conf.all.forwarding=1
+done
+
+for netns in nsrouter1 nsrouter2; do
+ip netns exec $netns nft -f - <<EOF
+table inet filter {
+	counter unknown { }
+	counter related { }
+	chain forward {
+		type filter hook forward priority 0; policy accept;
+		meta l4proto icmpv6 icmpv6 type "packet-too-big" ct state "related" counter name "related" accept
+		meta l4proto icmp icmp type "destination-unreachable" ct state "related" counter name "related" accept
+		meta l4proto { icmp, icmpv6 } ct state new,established accept
+		counter name "unknown" drop
+	}
+}
+EOF
+done
+
+ip netns exec nsclient1 nft -f - <<EOF
+table inet filter {
+	counter unknown { }
+	counter related { }
+	chain input {
+		type filter hook input priority 0; policy accept;
+		meta l4proto { icmp, icmpv6 } ct state established,untracked accept
+
+		meta l4proto { icmp, icmpv6 } ct state "related" counter name "related" accept
+		counter name "unknown" drop
+	}
+}
+EOF
+
+ip netns exec nsclient2 nft -f - <<EOF
+table inet filter {
+	counter unknown { }
+	counter new { }
+	counter established { }
+
+	chain input {
+		type filter hook input priority 0; policy accept;
+		meta l4proto { icmp, icmpv6 } ct state established,untracked accept
+
+		meta l4proto { icmp, icmpv6 } ct state "new" counter name "new" accept
+		meta l4proto { icmp, icmpv6 } ct state "established" counter name "established" accept
+		counter name "unknown" drop
+	}
+	chain output {
+		type filter hook output priority 0; policy accept;
+		meta l4proto { icmp, icmpv6 } ct state established,untracked accept
+
+		meta l4proto { icmp, icmpv6 } ct state "new" counter name "new"
+		meta l4proto { icmp, icmpv6 } ct state "established" counter name "established"
+		counter name "unknown" drop
+	}
+}
+EOF
+
+
+# make sure NAT core rewrites adress of icmp error if nat is used according to
+# conntrack nat information (icmp error will be directed at nsrouter1 address,
+# but it needs to be routed to nsclient1 address).
+ip netns exec nsrouter1 nft -f - <<EOF
+table ip nat {
+	chain postrouting {
+		type nat hook postrouting priority 0; policy accept;
+		ip protocol icmp oifname "veth0" counter masquerade
+	}
+}
+table ip6 nat {
+	chain postrouting {
+		type nat hook postrouting priority 0; policy accept;
+		ip6 nexthdr icmpv6 oifname "veth0" counter masquerade
+	}
+}
+EOF
+
+ip netns exec nsrouter2 ip link set eth1  mtu 1280
+ip netns exec nsclient2 ip link set veth0 mtu 1280
+sleep 1
+
+ip netns exec nsclient1 ping -c 1 -s 1000 -q -M do 192.168.2.2 >/dev/null
+if [ $? -ne 0 ]; then
+	echo "ERROR: netns ip routing/connectivity broken" 1>&2
+	cleanup
+	exit 1
+fi
+ip netns exec nsclient1 ping6 -q -c 1 -s 1000 dead:2::2 >/dev/null
+if [ $? -ne 0 ]; then
+	echo "ERROR: netns ipv6 routing/connectivity broken" 1>&2
+	cleanup
+	exit 1
+fi
+
+check_unknown
+if [ $? -ne 0 ]; then
+	ret=1
+fi
+
+expect="packets 0 bytes 0"
+for netns in nsrouter1 nsrouter2 nsclient1;do
+	check_counter "$netns" "related" "$expect"
+	if [ $? -ne 0 ]; then
+		ret=1
+	fi
+done
+
+expect="packets 2 bytes 2076"
+check_counter nsclient2 "new" "$expect"
+if [ $? -ne 0 ]; then
+	ret=1
+fi
+
+ip netns exec nsclient1 ping -q -c 1 -s 1300 -M do 192.168.2.2 > /dev/null
+if [ $? -eq 0 ]; then
+	echo "ERROR: ping should have failed with PMTU too big error" 1>&2
+	ret=1
+fi
+
+# nsrouter2 should have generated the icmp error, so
+# related counter should be 0 (its in forward).
+expect="packets 0 bytes 0"
+check_counter "nsrouter2" "related" "$expect"
+if [ $? -ne 0 ]; then
+	ret=1
+fi
+
+# but nsrouter1 should have seen it, same for nsclient1.
+expect="packets 1 bytes 576"
+for netns in nsrouter1 nsclient1;do
+	check_counter "$netns" "related" "$expect"
+	if [ $? -ne 0 ]; then
+		ret=1
+	fi
+done
+
+ip netns exec nsclient1 ping6 -c 1 -s 1300 dead:2::2 > /dev/null
+if [ $? -eq 0 ]; then
+	echo "ERROR: ping6 should have failed with PMTU too big error" 1>&2
+	ret=1
+fi
+
+expect="packets 2 bytes 1856"
+for netns in nsrouter1 nsclient1;do
+	check_counter "$netns" "related" "$expect"
+	if [ $? -ne 0 ]; then
+		ret=1
+	fi
+done
+
+if [ $ret -eq 0 ];then
+	echo "PASS: icmp mtu error had RELATED state"
+else
+	echo "ERROR: icmp error RELATED state test has failed"
+fi
+
+cleanup
+exit $ret
-- 
2.20.1

[PATCH 4.14 029/115] ipvs: do not schedule icmp errors from tunnels

[Greg Kroah-Hartman]

[ Upstream commit 0261ea1bd1eb0da5c0792a9119b8655cf33c80a3 ]

We can receive ICMP errors from client or from
tunneling real server. While the former can be
scheduled to real server, the latter should
not be scheduled, they are decapsulated only when
existing connection is found.

Fixes: 6044eeffafbe ("ipvs: attempt to schedule icmp packets")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/ipvs/ip_vs_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c
index 4278f5c947abd..d1c0378144f3d 100644
--- a/net/netfilter/ipvs/ip_vs_core.c
+++ b/net/netfilter/ipvs/ip_vs_core.c
@@ -1635,7 +1635,7 @@ ip_vs_in_icmp(struct netns_ipvs *ipvs, struct sk_buff *skb, int *related,
 	if (!cp) {
 		int v;
 
-		if (!sysctl_schedule_icmp(ipvs))
+		if (ipip || !sysctl_schedule_icmp(ipvs))
 			return NF_ACCEPT;
 
 		if (!ip_vs_try_to_schedule(ipvs, AF_INET, skb, pd, &v, &cp, &ciph))
-- 
2.20.1

[PATCH 4.14 030/115] netfilter: ctnetlink: dont use conntrack/expect object addresses as id

[Greg Kroah-Hartman]

[ Upstream commit 3c79107631db1f7fd32cf3f7368e4672004a3010 ]

else, we leak the addresses to userspace via ctnetlink events
and dumps.

Compute an ID on demand based on the immutable parts of nf_conn struct.

Another advantage compared to using an address is that there is no
immediate re-use of the same ID in case the conntrack entry is freed and
reallocated again immediately.

Fixes: 3583240249ef ("[NETFILTER]: nf_conntrack_expect: kill unique ID")
Fixes: 7f85f914721f ("[NETFILTER]: nf_conntrack: kill unique ID")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/netfilter/nf_conntrack.h |  2 ++
 net/netfilter/nf_conntrack_core.c    | 35 ++++++++++++++++++++++++++++
 net/netfilter/nf_conntrack_netlink.c | 34 +++++++++++++++++++++++----
 3 files changed, 66 insertions(+), 5 deletions(-)

diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h
index 792c3f6d30ce8..93bbae8f96414 100644
--- a/include/net/netfilter/nf_conntrack.h
+++ b/include/net/netfilter/nf_conntrack.h
@@ -315,6 +315,8 @@ struct nf_conn *nf_ct_tmpl_alloc(struct net *net,
 				 gfp_t flags);
 void nf_ct_tmpl_free(struct nf_conn *tmpl);
 
+u32 nf_ct_get_id(const struct nf_conn *ct);
+
 static inline void
 nf_ct_set(struct sk_buff *skb, struct nf_conn *ct, enum ip_conntrack_info info)
 {
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 06520bf30f294..fa49a627b6816 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -25,6 +25,7 @@
 #include <linux/slab.h>
 #include <linux/random.h>
 #include <linux/jhash.h>
+#include <linux/siphash.h>
 #include <linux/err.h>
 #include <linux/percpu.h>
 #include <linux/moduleparam.h>
@@ -300,6 +301,40 @@ nf_ct_invert_tuple(struct nf_conntrack_tuple *inverse,
 }
 EXPORT_SYMBOL_GPL(nf_ct_invert_tuple);
 
+/* Generate a almost-unique pseudo-id for a given conntrack.
+ *
+ * intentionally doesn't re-use any of the seeds used for hash
+ * table location, we assume id gets exposed to userspace.
+ *
+ * Following nf_conn items do not change throughout lifetime
+ * of the nf_conn after it has been committed to main hash table:
+ *
+ * 1. nf_conn address
+ * 2. nf_conn->ext address
+ * 3. nf_conn->master address (normally NULL)
+ * 4. tuple
+ * 5. the associated net namespace
+ */
+u32 nf_ct_get_id(const struct nf_conn *ct)
+{
+	static __read_mostly siphash_key_t ct_id_seed;
+	unsigned long a, b, c, d;
+
+	net_get_random_once(&ct_id_seed, sizeof(ct_id_seed));
+
+	a = (unsigned long)ct;
+	b = (unsigned long)ct->master ^ net_hash_mix(nf_ct_net(ct));
+	c = (unsigned long)ct->ext;
+	d = (unsigned long)siphash(&ct->tuplehash, sizeof(ct->tuplehash),
+				   &ct_id_seed);
+#ifdef CONFIG_64BIT
+	return siphash_4u64((u64)a, (u64)b, (u64)c, (u64)d, &ct_id_seed);
+#else
+	return siphash_4u32((u32)a, (u32)b, (u32)c, (u32)d, &ct_id_seed);
+#endif
+}
+EXPORT_SYMBOL_GPL(nf_ct_get_id);
+
 static void
 clean_from_lists(struct nf_conn *ct)
 {
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index 48dab1403b2c7..c781c9a1a697f 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -29,6 +29,7 @@
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
+#include <linux/siphash.h>
 
 #include <linux/netfilter.h>
 #include <net/netlink.h>
@@ -445,7 +446,9 @@ static int ctnetlink_dump_ct_seq_adj(struct sk_buff *skb, struct nf_conn *ct)
 
 static int ctnetlink_dump_id(struct sk_buff *skb, const struct nf_conn *ct)
 {
-	if (nla_put_be32(skb, CTA_ID, htonl((unsigned long)ct)))
+	__be32 id = (__force __be32)nf_ct_get_id(ct);
+
+	if (nla_put_be32(skb, CTA_ID, id))
 		goto nla_put_failure;
 	return 0;
 
@@ -1179,8 +1182,9 @@ static int ctnetlink_del_conntrack(struct net *net, struct sock *ctnl,
 	ct = nf_ct_tuplehash_to_ctrack(h);
 
 	if (cda[CTA_ID]) {
-		u_int32_t id = ntohl(nla_get_be32(cda[CTA_ID]));
-		if (id != (u32)(unsigned long)ct) {
+		__be32 id = nla_get_be32(cda[CTA_ID]);
+
+		if (id != (__force __be32)nf_ct_get_id(ct)) {
 			nf_ct_put(ct);
 			return -ENOENT;
 		}
@@ -2521,6 +2525,25 @@ static int ctnetlink_exp_dump_mask(struct sk_buff *skb,
 
 static const union nf_inet_addr any_addr;
 
+static __be32 nf_expect_get_id(const struct nf_conntrack_expect *exp)
+{
+	static __read_mostly siphash_key_t exp_id_seed;
+	unsigned long a, b, c, d;
+
+	net_get_random_once(&exp_id_seed, sizeof(exp_id_seed));
+
+	a = (unsigned long)exp;
+	b = (unsigned long)exp->helper;
+	c = (unsigned long)exp->master;
+	d = (unsigned long)siphash(&exp->tuple, sizeof(exp->tuple), &exp_id_seed);
+
+#ifdef CONFIG_64BIT
+	return (__force __be32)siphash_4u64((u64)a, (u64)b, (u64)c, (u64)d, &exp_id_seed);
+#else
+	return (__force __be32)siphash_4u32((u32)a, (u32)b, (u32)c, (u32)d, &exp_id_seed);
+#endif
+}
+
 static int
 ctnetlink_exp_dump_expect(struct sk_buff *skb,
 			  const struct nf_conntrack_expect *exp)
@@ -2568,7 +2591,7 @@ ctnetlink_exp_dump_expect(struct sk_buff *skb,
 	}
 #endif
 	if (nla_put_be32(skb, CTA_EXPECT_TIMEOUT, htonl(timeout)) ||
-	    nla_put_be32(skb, CTA_EXPECT_ID, htonl((unsigned long)exp)) ||
+	    nla_put_be32(skb, CTA_EXPECT_ID, nf_expect_get_id(exp)) ||
 	    nla_put_be32(skb, CTA_EXPECT_FLAGS, htonl(exp->flags)) ||
 	    nla_put_be32(skb, CTA_EXPECT_CLASS, htonl(exp->class)))
 		goto nla_put_failure;
@@ -2873,7 +2896,8 @@ static int ctnetlink_get_expect(struct net *net, struct sock *ctnl,
 
 	if (cda[CTA_EXPECT_ID]) {
 		__be32 id = nla_get_be32(cda[CTA_EXPECT_ID]);
-		if (ntohl(id) != (u32)(unsigned long)exp) {
+
+		if (id != nf_expect_get_id(exp)) {
 			nf_ct_expect_put(exp);
 			return -ENOENT;
 		}
-- 
2.20.1

[PATCH 4.14 031/115] MIPS: perf: ath79: Fix perfcount IRQ assignment

[Greg Kroah-Hartman]

[ Upstream commit a1e8783db8e0d58891681bc1e6d9ada66eae8e20 ]

Currently it's not possible to use perf on ath79 due to genirq flags
mismatch happening on static virtual IRQ 13 which is used for
performance counters hardware IRQ 5.

On TP-Link Archer C7v5:

           CPU0
  2:          0      MIPS   2  ath9k
  4:        318      MIPS   4  19000000.eth
  7:      55034      MIPS   7  timer
  8:       1236      MISC   3  ttyS0
 12:          0      INTC   1  ehci_hcd:usb1
 13:          0  gpio-ath79   2  keys
 14:          0  gpio-ath79   5  keys
 15:         31  AR724X PCI    1  ath10k_pci

 $ perf top
 genirq: Flags mismatch irq 13. 00014c83 (mips_perf_pmu) vs. 00002003 (keys)

On TP-Link Archer C7v4:

         CPU0
  4:          0      MIPS   4  19000000.eth
  5:       7135      MIPS   5  1a000000.eth
  7:      98379      MIPS   7  timer
  8:         30      MISC   3  ttyS0
 12:      90028      INTC   0  ath9k
 13:       5520      INTC   1  ehci_hcd:usb1
 14:       4623      INTC   2  ehci_hcd:usb2
 15:      32844  AR724X PCI    1  ath10k_pci
 16:          0  gpio-ath79  16  keys
 23:          0  gpio-ath79  23  keys

 $ perf top
 genirq: Flags mismatch irq 13. 00014c80 (mips_perf_pmu) vs. 00000080 (ehci_hcd:usb1)

This problem is happening, because currently statically assigned virtual
IRQ 13 for performance counters is not claimed during the initialization
of MIPS PMU during the bootup, so the IRQ subsystem doesn't know, that
this interrupt isn't available for further use.

So this patch fixes the issue by simply booking hardware IRQ 5 for MIPS PMU.

Tested-by: Kevin 'ldir' Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Acked-by: John Crispin <john@phrozen.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/ath79/setup.c          |  6 ------
 drivers/irqchip/irq-ath79-misc.c | 11 +++++++++++
 2 files changed, 11 insertions(+), 6 deletions(-)

diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c
index 26a058d58d37b..c7c31e2148136 100644
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -183,12 +183,6 @@ const char *get_system_type(void)
 	return ath79_sys_type;
 }
 
-int get_c0_perfcount_int(void)
-{
-	return ATH79_MISC_IRQ(5);
-}
-EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
-
 unsigned int get_c0_compare_int(void)
 {
 	return CP0_LEGACY_COMPARE_IRQ;
diff --git a/drivers/irqchip/irq-ath79-misc.c b/drivers/irqchip/irq-ath79-misc.c
index aa72907846360..0390603170b40 100644
--- a/drivers/irqchip/irq-ath79-misc.c
+++ b/drivers/irqchip/irq-ath79-misc.c
@@ -22,6 +22,15 @@
 #define AR71XX_RESET_REG_MISC_INT_ENABLE	4
 
 #define ATH79_MISC_IRQ_COUNT			32
+#define ATH79_MISC_PERF_IRQ			5
+
+static int ath79_perfcount_irq;
+
+int get_c0_perfcount_int(void)
+{
+	return ath79_perfcount_irq;
+}
+EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
 
 static void ath79_misc_irq_handler(struct irq_desc *desc)
 {
@@ -113,6 +122,8 @@ static void __init ath79_misc_intc_domain_init(
 {
 	void __iomem *base = domain->host_data;
 
+	ath79_perfcount_irq = irq_create_mapping(domain, ATH79_MISC_PERF_IRQ);
+
 	/* Disable and clear all interrupts */
 	__raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_ENABLE);
 	__raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_STATUS);
-- 
2.20.1

[PATCH 4.14 032/115] s390: ctcm: fix ctcm_new_device error return code

[Greg Kroah-Hartman]

[ Upstream commit 27b141fc234a3670d21bd742c35d7205d03cbb3a ]

clang points out that the return code from this function is
undefined for one of the error paths:

../drivers/s390/net/ctcm_main.c:1595:7: warning: variable 'result' is used uninitialized whenever 'if' condition is true
      [-Wsometimes-uninitialized]
                if (priv->channel[direction] == NULL) {
                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/s390/net/ctcm_main.c:1638:9: note: uninitialized use occurs here
        return result;
               ^~~~~~
../drivers/s390/net/ctcm_main.c:1595:3: note: remove the 'if' if its condition is always false
                if (priv->channel[direction] == NULL) {
                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/s390/net/ctcm_main.c:1539:12: note: initialize the variable 'result' to silence this warning
        int result;
                  ^

Make it return -ENODEV here, as in the related failure cases.
gcc has a known bug in underreporting some of these warnings
when it has already eliminated the assignment of the return code
based on some earlier optimization step.

Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/ctcm_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/s390/net/ctcm_main.c b/drivers/s390/net/ctcm_main.c
index 26363e0816fe4..fbe35c2ac8981 100644
--- a/drivers/s390/net/ctcm_main.c
+++ b/drivers/s390/net/ctcm_main.c
@@ -1594,6 +1594,7 @@ static int ctcm_new_device(struct ccwgroup_device *cgdev)
 		if (priv->channel[direction] == NULL) {
 			if (direction == CTCM_WRITE)
 				channel_free(priv->channel[CTCM_READ]);
+			result = -ENODEV;
 			goto out_dev;
 		}
 		priv->channel[direction]->netdev = dev;
-- 
2.20.1

[PATCH 4.14 033/115] drm/sun4i: Set device driver data at bind time for use in unbind

[Greg Kroah-Hartman]

[ Upstream commit 02b92adbe33e6dbd15dc6e32540b22f47c4ff0a2 ]

Our sun4i_drv_unbind gets the drm device using dev_get_drvdata.
However, that driver data is never set in sun4i_drv_bind.

Set it there to avoid getting a NULL pointer at unbind time.

Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190418132727.5128-3-paul.kocialkowski@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/sun4i/sun4i_drv.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c b/drivers/gpu/drm/sun4i/sun4i_drv.c
index 8d3c8070ed862..e09161cf312f7 100644
--- a/drivers/gpu/drm/sun4i/sun4i_drv.c
+++ b/drivers/gpu/drm/sun4i/sun4i_drv.c
@@ -96,6 +96,8 @@ static int sun4i_drv_bind(struct device *dev)
 		ret = -ENOMEM;
 		goto free_drm;
 	}
+
+	dev_set_drvdata(dev, drm);
 	drm->dev_private = drv;
 	INIT_LIST_HEAD(&drv->engine_list);
 	INIT_LIST_HEAD(&drv->tcon_list);
-- 
2.20.1

[PATCH 4.14 034/115] selftests/net: correct the return value for run_netsocktests

[Greg Kroah-Hartman]

[ Upstream commit 30c04d796b693e22405c38e9b78e9a364e4c77e6 ]

The run_netsocktests will be marked as passed regardless the actual test
result from the ./socket:

    selftests: net: run_netsocktests
    ========================================
    --------------------
    running socket test
    --------------------
    [FAIL]
    ok 1..6 selftests: net: run_netsocktests [PASS]

This is because the test script itself has been successfully executed.
Fix this by exit 1 when the test failed.

Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/net/run_netsocktests | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/net/run_netsocktests b/tools/testing/selftests/net/run_netsocktests
index b093f39c298c3..14e41faf2c574 100755
--- a/tools/testing/selftests/net/run_netsocktests
+++ b/tools/testing/selftests/net/run_netsocktests
@@ -7,7 +7,7 @@ echo "--------------------"
 ./socket
 if [ $? -ne 0 ]; then
 	echo "[FAIL]"
+	exit 1
 else
 	echo "[PASS]"
 fi
-
-- 
2.20.1

[PATCH 4.14 035/115] gpu: ipu-v3: dp: fix CSC handling

[Greg Kroah-Hartman]

[ Upstream commit d4fad0a426c6e26f48c9a7cdd21a7fe9c198d645 ]

Initialize the flow input colorspaces to unknown and reset to that value
when the channel gets disabled. This avoids the state getting mixed up
with a previous mode.

Also keep the CSC settings for the background flow intact when disabling
the foreground flow.

Root-caused-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/ipu-v3/ipu-dp.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/ipu-v3/ipu-dp.c b/drivers/gpu/ipu-v3/ipu-dp.c
index 9b2b3fa479c46..5e44ff1f20851 100644
--- a/drivers/gpu/ipu-v3/ipu-dp.c
+++ b/drivers/gpu/ipu-v3/ipu-dp.c
@@ -195,7 +195,8 @@ int ipu_dp_setup_channel(struct ipu_dp *dp,
 		ipu_dp_csc_init(flow, flow->foreground.in_cs, flow->out_cs,
 				DP_COM_CONF_CSC_DEF_BOTH);
 	} else {
-		if (flow->foreground.in_cs == flow->out_cs)
+		if (flow->foreground.in_cs == IPUV3_COLORSPACE_UNKNOWN ||
+		    flow->foreground.in_cs == flow->out_cs)
 			/*
 			 * foreground identical to output, apply color
 			 * conversion on background
@@ -261,6 +262,8 @@ void ipu_dp_disable_channel(struct ipu_dp *dp, bool sync)
 	struct ipu_dp_priv *priv = flow->priv;
 	u32 reg, csc;
 
+	dp->in_cs = IPUV3_COLORSPACE_UNKNOWN;
+
 	if (!dp->foreground)
 		return;
 
@@ -268,8 +271,9 @@ void ipu_dp_disable_channel(struct ipu_dp *dp, bool sync)
 
 	reg = readl(flow->base + DP_COM_CONF);
 	csc = reg & DP_COM_CONF_CSC_DEF_MASK;
-	if (csc == DP_COM_CONF_CSC_DEF_FG)
-		reg &= ~DP_COM_CONF_CSC_DEF_MASK;
+	reg &= ~DP_COM_CONF_CSC_DEF_MASK;
+	if (csc == DP_COM_CONF_CSC_DEF_BOTH || csc == DP_COM_CONF_CSC_DEF_BG)
+		reg |= DP_COM_CONF_CSC_DEF_BG;
 
 	reg &= ~DP_COM_CONF_FG_EN;
 	writel(reg, flow->base + DP_COM_CONF);
@@ -347,6 +351,8 @@ int ipu_dp_init(struct ipu_soc *ipu, struct device *dev, unsigned long base)
 	mutex_init(&priv->mutex);
 
 	for (i = 0; i < IPUV3_NUM_FLOWS; i++) {
+		priv->flow[i].background.in_cs = IPUV3_COLORSPACE_UNKNOWN;
+		priv->flow[i].foreground.in_cs = IPUV3_COLORSPACE_UNKNOWN;
 		priv->flow[i].foreground.foreground = true;
 		priv->flow[i].base = priv->base + ipu_dp_flow_base[i];
 		priv->flow[i].priv = priv;
-- 
2.20.1

[PATCH 4.14 036/115] drm/imx: dont skip DP channel disable for background plane

[Greg Kroah-Hartman]

[ Upstream commit 7bcde275eb1d0ac8793c77c7e666a886eb16633d ]

In order to make sure that the plane color space gets reset correctly.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/imx/ipuv3-crtc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/imx/ipuv3-crtc.c b/drivers/gpu/drm/imx/ipuv3-crtc.c
index d976391dfa31c..957fbf8c55ebc 100644
--- a/drivers/gpu/drm/imx/ipuv3-crtc.c
+++ b/drivers/gpu/drm/imx/ipuv3-crtc.c
@@ -79,7 +79,7 @@ static void ipu_crtc_disable_planes(struct ipu_crtc *ipu_crtc,
 	if (disable_partial)
 		ipu_plane_disable(ipu_crtc->plane[1], true);
 	if (disable_full)
-		ipu_plane_disable(ipu_crtc->plane[0], false);
+		ipu_plane_disable(ipu_crtc->plane[0], true);
 }
 
 static void ipu_crtc_atomic_disable(struct drm_crtc *crtc,
-- 
2.20.1

[PATCH 4.14 037/115] spi: Micrel eth switch: declare missing of table

[Greg Kroah-Hartman]

[ Upstream commit 2f23a2a768bee7ad2ff1e9527c3f7e279e794a46 ]

Add missing <of_device_id> table for SPI driver relying on SPI
device match since compatible is in a DT binding or in a DTS.

Before this patch:
modinfo drivers/net/phy/spi_ks8995.ko | grep alias
alias:          spi:ksz8795
alias:          spi:ksz8864
alias:          spi:ks8995

After this patch:
modinfo drivers/net/phy/spi_ks8995.ko | grep alias
alias:          spi:ksz8795
alias:          spi:ksz8864
alias:          spi:ks8995
alias:          of:N*T*Cmicrel,ksz8795C*
alias:          of:N*T*Cmicrel,ksz8795
alias:          of:N*T*Cmicrel,ksz8864C*
alias:          of:N*T*Cmicrel,ksz8864
alias:          of:N*T*Cmicrel,ks8995C*
alias:          of:N*T*Cmicrel,ks8995

Reported-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Daniel Gomez <dagmcr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/spi_ks8995.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/net/phy/spi_ks8995.c b/drivers/net/phy/spi_ks8995.c
index 1e2d4f1179da3..45df03673e010 100644
--- a/drivers/net/phy/spi_ks8995.c
+++ b/drivers/net/phy/spi_ks8995.c
@@ -162,6 +162,14 @@ static const struct spi_device_id ks8995_id[] = {
 };
 MODULE_DEVICE_TABLE(spi, ks8995_id);
 
+static const struct of_device_id ks8895_spi_of_match[] = {
+        { .compatible = "micrel,ks8995" },
+        { .compatible = "micrel,ksz8864" },
+        { .compatible = "micrel,ksz8795" },
+        { },
+ };
+MODULE_DEVICE_TABLE(of, ks8895_spi_of_match);
+
 static inline u8 get_chip_id(u8 val)
 {
 	return (val >> ID1_CHIPID_S) & ID1_CHIPID_M;
@@ -529,6 +537,7 @@ static int ks8995_remove(struct spi_device *spi)
 static struct spi_driver ks8995_driver = {
 	.driver = {
 		.name	    = "spi-ks8995",
+		.of_match_table = of_match_ptr(ks8895_spi_of_match),
 	},
 	.probe	  = ks8995_probe,
 	.remove	  = ks8995_remove,
-- 
2.20.1

[PATCH 4.14 038/115] spi: ST ST95HF NFC: declare missing of table

[Greg Kroah-Hartman]

[ Upstream commit d04830531d0c4a99c897a44038e5da3d23331d2f ]

Add missing <of_device_id> table for SPI driver relying on SPI
device match since compatible is in a DT binding or in a DTS.

Before this patch:
modinfo drivers/nfc/st95hf/st95hf.ko | grep alias
alias:          spi:st95hf

After this patch:
modinfo drivers/nfc/st95hf/st95hf.ko | grep alias
alias:          spi:st95hf
alias:          of:N*T*Cst,st95hfC*
alias:          of:N*T*Cst,st95hf

Reported-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Daniel Gomez <dagmcr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nfc/st95hf/core.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/nfc/st95hf/core.c b/drivers/nfc/st95hf/core.c
index 2b26f762fbc3b..01acb6e533655 100644
--- a/drivers/nfc/st95hf/core.c
+++ b/drivers/nfc/st95hf/core.c
@@ -1074,6 +1074,12 @@ static const struct spi_device_id st95hf_id[] = {
 };
 MODULE_DEVICE_TABLE(spi, st95hf_id);
 
+static const struct of_device_id st95hf_spi_of_match[] = {
+        { .compatible = "st,st95hf" },
+        { },
+};
+MODULE_DEVICE_TABLE(of, st95hf_spi_of_match);
+
 static int st95hf_probe(struct spi_device *nfc_spi_dev)
 {
 	int ret;
@@ -1260,6 +1266,7 @@ static struct spi_driver st95hf_driver = {
 	.driver = {
 		.name = "st95hf",
 		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(st95hf_spi_of_match),
 	},
 	.id_table = st95hf_id,
 	.probe = st95hf_probe,
-- 
2.20.1

[PATCH 4.14 039/115] Input: synaptics-rmi4 - fix possible double free

[Greg Kroah-Hartman]

[ Upstream commit bce1a78423961fce676ac65540a31b6ffd179e6d ]

The RMI4 function structure has been released in rmi_register_function
if error occurs. However, it will be released again in the function
rmi_create_function, which may result in a double-free bug.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/rmi4/rmi_driver.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c
index f5954981e9ee5..997ccae7ee055 100644
--- a/drivers/input/rmi4/rmi_driver.c
+++ b/drivers/input/rmi4/rmi_driver.c
@@ -883,7 +883,7 @@ static int rmi_create_function(struct rmi_device *rmi_dev,
 
 	error = rmi_register_function(fn);
 	if (error)
-		goto err_put_fn;
+		return error;
 
 	if (pdt->function_number == 0x01)
 		data->f01_container = fn;
@@ -893,10 +893,6 @@ static int rmi_create_function(struct rmi_device *rmi_dev,
 	list_add_tail(&fn->node, &data->function_list);
 
 	return RMI_SCAN_CONTINUE;
-
-err_put_fn:
-	put_device(&fn->dev);
-	return error;
 }
 
 void rmi_enable_irq(struct rmi_device *rmi_dev, bool clear_wake)
-- 
2.20.1

[PATCH 4.14 040/115] sparc64: Export __node_distance.

[Greg Kroah-Hartman]

[ Upstream commit 2b4792eaa9f553764047d157365ed8b7787751a3 ]

Some drivers reference it via node_distance(), for example the
NVME host driver core.

ERROR: "__node_distance" [drivers/nvme/host/nvme-core.ko] undefined!
make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/sparc/mm/init_64.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index 984e9d65ea0d1..76977296dc9c6 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -1383,6 +1383,7 @@ int __node_distance(int from, int to)
 	}
 	return numa_latency[from][to];
 }
+EXPORT_SYMBOL(__node_distance);
 
 static int __init find_best_numa_node_for_mlgroup(struct mdesc_mlgroup *grp)
 {
-- 
2.20.1

[PATCH 4.14 041/115] sparc64: Make corrupted user stacks more debuggable.

[Greg Kroah-Hartman]

[ Upstream commit 5b4fc3882a649c9411dd0dcad2ddb78e911d340e ]

Right now if we get a corrupted user stack frame we do a
do_exit(SIGILL) which is not helpful.

If under a debugger, this behavior causes the inferior process to
exit.  So the register and other state cannot be examined at the time
of the event.

Instead, conditionally log a rate limited kernel log message and then
force a SIGSEGV.

With bits and ideas borrowed (as usual) from powerpc.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/sparc/include/asm/switch_to_64.h |  3 ++-
 arch/sparc/kernel/process_64.c        | 25 +++++++++++++++++++------
 arch/sparc/kernel/rtrap_64.S          |  1 +
 arch/sparc/kernel/signal32.c          | 12 ++++++++++--
 arch/sparc/kernel/signal_64.c         |  6 +++++-
 5 files changed, 37 insertions(+), 10 deletions(-)

diff --git a/arch/sparc/include/asm/switch_to_64.h b/arch/sparc/include/asm/switch_to_64.h
index 4ff29b1406a9b..b1d4e2e3210fb 100644
--- a/arch/sparc/include/asm/switch_to_64.h
+++ b/arch/sparc/include/asm/switch_to_64.h
@@ -67,6 +67,7 @@ do {	save_and_clear_fpu();						\
 } while(0)
 
 void synchronize_user_stack(void);
-void fault_in_user_windows(void);
+struct pt_regs;
+void fault_in_user_windows(struct pt_regs *);
 
 #endif /* __SPARC64_SWITCH_TO_64_H */
diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c
index 318efd784a0b3..5640131e2abf3 100644
--- a/arch/sparc/kernel/process_64.c
+++ b/arch/sparc/kernel/process_64.c
@@ -36,6 +36,7 @@
 #include <linux/sysrq.h>
 #include <linux/nmi.h>
 #include <linux/context_tracking.h>
+#include <linux/signal.h>
 
 #include <linux/uaccess.h>
 #include <asm/page.h>
@@ -528,7 +529,12 @@ static void stack_unaligned(unsigned long sp)
 	force_sig_info(SIGBUS, &info, current);
 }
 
-void fault_in_user_windows(void)
+static const char uwfault32[] = KERN_INFO \
+	"%s[%d]: bad register window fault: SP %08lx (orig_sp %08lx) TPC %08lx O7 %08lx\n";
+static const char uwfault64[] = KERN_INFO \
+	"%s[%d]: bad register window fault: SP %016lx (orig_sp %016lx) TPC %08lx O7 %016lx\n";
+
+void fault_in_user_windows(struct pt_regs *regs)
 {
 	struct thread_info *t = current_thread_info();
 	unsigned long window;
@@ -541,9 +547,9 @@ void fault_in_user_windows(void)
 		do {
 			struct reg_window *rwin = &t->reg_window[window];
 			int winsize = sizeof(struct reg_window);
-			unsigned long sp;
+			unsigned long sp, orig_sp;
 
-			sp = t->rwbuf_stkptrs[window];
+			orig_sp = sp = t->rwbuf_stkptrs[window];
 
 			if (test_thread_64bit_stack(sp))
 				sp += STACK_BIAS;
@@ -554,8 +560,16 @@ void fault_in_user_windows(void)
 				stack_unaligned(sp);
 
 			if (unlikely(copy_to_user((char __user *)sp,
-						  rwin, winsize)))
+						  rwin, winsize))) {
+				if (show_unhandled_signals)
+					printk_ratelimited(is_compat_task() ?
+							   uwfault32 : uwfault64,
+							   current->comm, current->pid,
+							   sp, orig_sp,
+							   regs->tpc,
+							   regs->u_regs[UREG_I7]);
 				goto barf;
+			}
 		} while (window--);
 	}
 	set_thread_wsaved(0);
@@ -563,8 +577,7 @@ void fault_in_user_windows(void)
 
 barf:
 	set_thread_wsaved(window + 1);
-	user_exit();
-	do_exit(SIGILL);
+	force_sig(SIGSEGV, current);
 }
 
 asmlinkage long sparc_do_fork(unsigned long clone_flags,
diff --git a/arch/sparc/kernel/rtrap_64.S b/arch/sparc/kernel/rtrap_64.S
index 0b21042ab181b..ad88d60bb740c 100644
--- a/arch/sparc/kernel/rtrap_64.S
+++ b/arch/sparc/kernel/rtrap_64.S
@@ -30,6 +30,7 @@ __handle_preemption:
 		 wrpr			%g0, RTRAP_PSTATE_IRQOFF, %pstate
 
 __handle_user_windows:
+		add			%sp, PTREGS_OFF, %o0
 		call			fault_in_user_windows
 		 wrpr			%g0, RTRAP_PSTATE, %pstate
 		ba,pt			%xcc, __handle_preemption_continue
diff --git a/arch/sparc/kernel/signal32.c b/arch/sparc/kernel/signal32.c
index 5c572de64c748..879f8d86bc21c 100644
--- a/arch/sparc/kernel/signal32.c
+++ b/arch/sparc/kernel/signal32.c
@@ -442,7 +442,11 @@ static int setup_frame32(struct ksignal *ksig, struct pt_regs *regs,
 		get_sigframe(ksig, regs, sigframe_size);
 	
 	if (invalid_frame_pointer(sf, sigframe_size)) {
-		do_exit(SIGILL);
+		if (show_unhandled_signals)
+			pr_info("%s[%d] bad frame in setup_frame32: %08lx TPC %08lx O7 %08lx\n",
+				current->comm, current->pid, (unsigned long)sf,
+				regs->tpc, regs->u_regs[UREG_I7]);
+		force_sigsegv(ksig->sig, current);
 		return -EINVAL;
 	}
 
@@ -573,7 +577,11 @@ static int setup_rt_frame32(struct ksignal *ksig, struct pt_regs *regs,
 		get_sigframe(ksig, regs, sigframe_size);
 	
 	if (invalid_frame_pointer(sf, sigframe_size)) {
-		do_exit(SIGILL);
+		if (show_unhandled_signals)
+			pr_info("%s[%d] bad frame in setup_rt_frame32: %08lx TPC %08lx O7 %08lx\n",
+				current->comm, current->pid, (unsigned long)sf,
+				regs->tpc, regs->u_regs[UREG_I7]);
+		force_sigsegv(ksig->sig, current);
 		return -EINVAL;
 	}
 
diff --git a/arch/sparc/kernel/signal_64.c b/arch/sparc/kernel/signal_64.c
index 20426a1c28f29..2d0a50bde3f96 100644
--- a/arch/sparc/kernel/signal_64.c
+++ b/arch/sparc/kernel/signal_64.c
@@ -373,7 +373,11 @@ setup_rt_frame(struct ksignal *ksig, struct pt_regs *regs)
 		get_sigframe(ksig, regs, sf_size);
 
 	if (invalid_frame_pointer (sf)) {
-		do_exit(SIGILL);	/* won't return, actually */
+		if (show_unhandled_signals)
+			pr_info("%s[%d] bad frame in setup_rt_frame: %016lx TPC %016lx O7 %016lx\n",
+				current->comm, current->pid, (unsigned long)sf,
+				regs->tpc, regs->u_regs[UREG_I7]);
+		force_sigsegv(ksig->sig, current);
 		return -EINVAL;
 	}
 
-- 
2.20.1

[PATCH 4.14 042/115] MIPS: VDSO: Reduce VDSO_RANDOMIZE_SIZE to 64MB for 64bit

[Greg Kroah-Hartman]

[ Upstream commit c61c7def1fa0a722610d89790e0255b74f3c07dd ]

Commit ea7e0480a4b6 ("MIPS: VDSO: Always map near top of user memory")
set VDSO_RANDOMIZE_SIZE to 256MB for 64bit kernel. But take a look at
arch/mips/mm/mmap.c we can see that MIN_GAP is 128MB, which means the
mmap_base may be at (user_address_top - 128MB). This make the stack be
surrounded by mmaped areas, then stack expanding fails and causes a
segmentation fault. Therefore, VDSO_RANDOMIZE_SIZE should be less than
MIN_GAP and this patch reduce it to 64MB.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: ea7e0480a4b6 ("MIPS: VDSO: Always map near top of user memory")
Patchwork: https://patchwork.linux-mips.org/patch/20910/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhuacai@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/mips/include/asm/processor.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h
index 8bbbab611a3f1..0b86a01de9562 100644
--- a/arch/mips/include/asm/processor.h
+++ b/arch/mips/include/asm/processor.h
@@ -81,7 +81,7 @@ extern unsigned int vced_count, vcei_count;
 
 #endif
 
-#define VDSO_RANDOMIZE_SIZE	(TASK_IS_32BIT_ADDR ? SZ_1M : SZ_256M)
+#define VDSO_RANDOMIZE_SIZE	(TASK_IS_32BIT_ADDR ? SZ_1M : SZ_64M)
 
 extern unsigned long mips_stack_top(void);
 #define STACK_TOP		mips_stack_top()
-- 
2.20.1

[PATCH 4.14 043/115] bcache: correct dirty data statistics

[Greg Kroah-Hartman]

[ Upstream commit 2e17a262a2371d38d2ec03614a2675a32cef9912 ]

When bcache device is clean, dirty keys may still exist after
journal replay, so we need to count these dirty keys even
device in clean status, otherwise after writeback, the amount
of dirty data would be incorrect.

Signed-off-by: Tang Junhui <tang.junhui.linux@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/md/bcache/super.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c
index fe6e4c319b7cf..9e875aba41b9b 100644
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -1045,12 +1045,13 @@ int bch_cached_dev_attach(struct cached_dev *dc, struct cache_set *c,
 	}
 
 	if (BDEV_STATE(&dc->sb) == BDEV_STATE_DIRTY) {
-		bch_sectors_dirty_init(&dc->disk);
 		atomic_set(&dc->has_dirty, 1);
 		atomic_inc(&dc->count);
 		bch_writeback_queue(dc);
 	}
 
+	bch_sectors_dirty_init(&dc->disk);
+
 	bch_cached_dev_run(dc);
 	bcache_device_link(&dc->disk, c, "bdev");
 
-- 
2.20.1

[PATCH 4.14 044/115] ACPICA: AML interpreter: add region addresses in global list during initialization

[Greg Kroah-Hartman]

[ Upstream commit 4abb951b73ff0a8a979113ef185651aa3c8da19b ]

The table load process omitted adding the operation region address
range to the global list. This omission is problematic because the OS
queries the global list to check for address range conflicts before
deciding which drivers to load. This commit may result in warning
messages that look like the following:

[    7.871761] ACPI Warning: system_IO range 0x00000428-0x0000042F conflicts with op_region 0x00000400-0x0000047F (\PMIO) (20180531/utaddress-213)
[    7.871769] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

However, these messages do not signify regressions. It is a result of
properly adding address ranges within the global address list.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=200011
Tested-by: Jean-Marc Lenoir <archlinux@jihemel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/acpi/acpica/dsopcode.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/acpi/acpica/dsopcode.c b/drivers/acpi/acpica/dsopcode.c
index 0336df7ac47dd..e8070f6ca835e 100644
--- a/drivers/acpi/acpica/dsopcode.c
+++ b/drivers/acpi/acpica/dsopcode.c
@@ -451,6 +451,10 @@ acpi_ds_eval_region_operands(struct acpi_walk_state *walk_state,
 			  ACPI_FORMAT_UINT64(obj_desc->region.address),
 			  obj_desc->region.length));
 
+	status = acpi_ut_add_address_range(obj_desc->region.space_id,
+					   obj_desc->region.address,
+					   obj_desc->region.length, node);
+
 	/* Now the address and length are valid for this opregion */
 
 	obj_desc->region.flags |= AOPOBJ_DATA_VALID;
-- 
2.20.1

[PATCH 4.14 045/115] IB/rxe: Revise the ib_wr_opcode enum

[Greg Kroah-Hartman]

[ Upstream commit 9a59739bd01f77db6fbe2955a4fce165f0f43568 ]

This enum has become part of the uABI, as both RXE and the
ib_uverbs_post_send() command expect userspace to supply values from this
enum. So it should be properly placed in include/uapi/rdma.

In userspace this enum is called 'enum ibv_wr_opcode' as part of
libibverbs.h. That enum defines different values for IB_WR_LOCAL_INV,
IB_WR_SEND_WITH_INV, and IB_WR_LSO. These were introduced (incorrectly, it
turns out) into libiberbs in 2015.

The kernel has changed its mind on the numbering for several of the IB_WC
values over the years, but has remained stable on IB_WR_LOCAL_INV and
below.

Based on this we can conclude that there is no real user space user of the
values beyond IB_WR_ATOMIC_FETCH_AND_ADD, as they have never worked via
rdma-core. This is confirmed by inspection, only rxe uses the kernel enum
and implements the latter operations. rxe has clearly never worked with
these attributes from userspace. Other drivers that support these opcodes
implement the functionality without calling out to the kernel.

To make IB_WR_SEND_WITH_INV and related work for RXE in userspace we
choose to renumber the IB_WR enum in the kernel to match the uABI that
userspace has bee using since before Soft RoCE was merged. This is an
overall simpler configuration for the whole software stack, and obviously
can't break anything existing.

Reported-by: Seth Howell <seth.howell@intel.com>
Tested-by: Seth Howell <seth.howell@intel.com>
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 include/rdma/ib_verbs.h           | 34 ++++++++++++++++++-------------
 include/uapi/rdma/ib_user_verbs.h | 20 +++++++++++++++++-
 2 files changed, 39 insertions(+), 15 deletions(-)

diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
index 5a24b4c700e59..9e76b2410d03f 100644
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -1251,21 +1251,27 @@ struct ib_qp_attr {
 };
 
 enum ib_wr_opcode {
-	IB_WR_RDMA_WRITE,
-	IB_WR_RDMA_WRITE_WITH_IMM,
-	IB_WR_SEND,
-	IB_WR_SEND_WITH_IMM,
-	IB_WR_RDMA_READ,
-	IB_WR_ATOMIC_CMP_AND_SWP,
-	IB_WR_ATOMIC_FETCH_AND_ADD,
-	IB_WR_LSO,
-	IB_WR_SEND_WITH_INV,
-	IB_WR_RDMA_READ_WITH_INV,
-	IB_WR_LOCAL_INV,
-	IB_WR_REG_MR,
-	IB_WR_MASKED_ATOMIC_CMP_AND_SWP,
-	IB_WR_MASKED_ATOMIC_FETCH_AND_ADD,
+	/* These are shared with userspace */
+	IB_WR_RDMA_WRITE = IB_UVERBS_WR_RDMA_WRITE,
+	IB_WR_RDMA_WRITE_WITH_IMM = IB_UVERBS_WR_RDMA_WRITE_WITH_IMM,
+	IB_WR_SEND = IB_UVERBS_WR_SEND,
+	IB_WR_SEND_WITH_IMM = IB_UVERBS_WR_SEND_WITH_IMM,
+	IB_WR_RDMA_READ = IB_UVERBS_WR_RDMA_READ,
+	IB_WR_ATOMIC_CMP_AND_SWP = IB_UVERBS_WR_ATOMIC_CMP_AND_SWP,
+	IB_WR_ATOMIC_FETCH_AND_ADD = IB_UVERBS_WR_ATOMIC_FETCH_AND_ADD,
+	IB_WR_LSO = IB_UVERBS_WR_TSO,
+	IB_WR_SEND_WITH_INV = IB_UVERBS_WR_SEND_WITH_INV,
+	IB_WR_RDMA_READ_WITH_INV = IB_UVERBS_WR_RDMA_READ_WITH_INV,
+	IB_WR_LOCAL_INV = IB_UVERBS_WR_LOCAL_INV,
+	IB_WR_MASKED_ATOMIC_CMP_AND_SWP =
+		IB_UVERBS_WR_MASKED_ATOMIC_CMP_AND_SWP,
+	IB_WR_MASKED_ATOMIC_FETCH_AND_ADD =
+		IB_UVERBS_WR_MASKED_ATOMIC_FETCH_AND_ADD,
+
+	/* These are kernel only and can not be issued by userspace */
+	IB_WR_REG_MR = 0x20,
 	IB_WR_REG_SIG_MR,
+
 	/* reserve values for low level drivers' internal use.
 	 * These values will not be used at all in the ib core layer.
 	 */
diff --git a/include/uapi/rdma/ib_user_verbs.h b/include/uapi/rdma/ib_user_verbs.h
index e0e83a105953a..e11b4def8630f 100644
--- a/include/uapi/rdma/ib_user_verbs.h
+++ b/include/uapi/rdma/ib_user_verbs.h
@@ -751,10 +751,28 @@ struct ib_uverbs_sge {
 	__u32 lkey;
 };
 
+enum ib_uverbs_wr_opcode {
+	IB_UVERBS_WR_RDMA_WRITE = 0,
+	IB_UVERBS_WR_RDMA_WRITE_WITH_IMM = 1,
+	IB_UVERBS_WR_SEND = 2,
+	IB_UVERBS_WR_SEND_WITH_IMM = 3,
+	IB_UVERBS_WR_RDMA_READ = 4,
+	IB_UVERBS_WR_ATOMIC_CMP_AND_SWP = 5,
+	IB_UVERBS_WR_ATOMIC_FETCH_AND_ADD = 6,
+	IB_UVERBS_WR_LOCAL_INV = 7,
+	IB_UVERBS_WR_BIND_MW = 8,
+	IB_UVERBS_WR_SEND_WITH_INV = 9,
+	IB_UVERBS_WR_TSO = 10,
+	IB_UVERBS_WR_RDMA_READ_WITH_INV = 11,
+	IB_UVERBS_WR_MASKED_ATOMIC_CMP_AND_SWP = 12,
+	IB_UVERBS_WR_MASKED_ATOMIC_FETCH_AND_ADD = 13,
+	/* Review enum ib_wr_opcode before modifying this */
+};
+
 struct ib_uverbs_send_wr {
 	__u64 wr_id;
 	__u32 num_sge;
-	__u32 opcode;
+	__u32 opcode;		/* see enum ib_uverbs_wr_opcode */
 	__u32 send_flags;
 	union {
 		__u32 imm_data;
-- 
2.20.1

[PATCH 4.14 046/115] ima: open a new file instance if no read permissions

[Greg Kroah-Hartman]

[ Upstream commit a408e4a86b36bf98ad15b9ada531cf0e5118ac67 ]

Open a new file instance as opposed to changing file->f_mode when
the file is not readable.  This is done to accomodate overlayfs
stacked file operations change.  The real struct file is hidden
behind the overlays struct file.  So, any file->f_mode manipulations are
not reflected on the real struct file.  Open the file again in read mode
if original file cannot be read, read and calculate the hash.

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Cc: stable@vger.kernel.org (linux-4.19)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 security/integrity/ima/ima_crypto.c | 54 ++++++++++++++++++-----------
 1 file changed, 34 insertions(+), 20 deletions(-)

diff --git a/security/integrity/ima/ima_crypto.c b/security/integrity/ima/ima_crypto.c
index cb041af9eddb2..af680b5b678a4 100644
--- a/security/integrity/ima/ima_crypto.c
+++ b/security/integrity/ima/ima_crypto.c
@@ -232,7 +232,7 @@ static int ima_calc_file_hash_atfm(struct file *file,
 {
 	loff_t i_size, offset;
 	char *rbuf[2] = { NULL, };
-	int rc, read = 0, rbuf_len, active = 0, ahash_rc = 0;
+	int rc, rbuf_len, active = 0, ahash_rc = 0;
 	struct ahash_request *req;
 	struct scatterlist sg[1];
 	struct ahash_completion res;
@@ -279,11 +279,6 @@ static int ima_calc_file_hash_atfm(struct file *file,
 					  &rbuf_size[1], 0);
 	}
 
-	if (!(file->f_mode & FMODE_READ)) {
-		file->f_mode |= FMODE_READ;
-		read = 1;
-	}
-
 	for (offset = 0; offset < i_size; offset += rbuf_len) {
 		if (!rbuf[1] && offset) {
 			/* Not using two buffers, and it is not the first
@@ -322,8 +317,6 @@ static int ima_calc_file_hash_atfm(struct file *file,
 	/* wait for the last update request to complete */
 	rc = ahash_wait(ahash_rc, &res);
 out3:
-	if (read)
-		file->f_mode &= ~FMODE_READ;
 	ima_free_pages(rbuf[0], rbuf_size[0]);
 	ima_free_pages(rbuf[1], rbuf_size[1]);
 out2:
@@ -358,7 +351,7 @@ static int ima_calc_file_hash_tfm(struct file *file,
 {
 	loff_t i_size, offset = 0;
 	char *rbuf;
-	int rc, read = 0;
+	int rc;
 	SHASH_DESC_ON_STACK(shash, tfm);
 
 	shash->tfm = tfm;
@@ -379,11 +372,6 @@ static int ima_calc_file_hash_tfm(struct file *file,
 	if (!rbuf)
 		return -ENOMEM;
 
-	if (!(file->f_mode & FMODE_READ)) {
-		file->f_mode |= FMODE_READ;
-		read = 1;
-	}
-
 	while (offset < i_size) {
 		int rbuf_len;
 
@@ -400,8 +388,6 @@ static int ima_calc_file_hash_tfm(struct file *file,
 		if (rc)
 			break;
 	}
-	if (read)
-		file->f_mode &= ~FMODE_READ;
 	kfree(rbuf);
 out:
 	if (!rc)
@@ -442,6 +428,8 @@ int ima_calc_file_hash(struct file *file, struct ima_digest_data *hash)
 {
 	loff_t i_size;
 	int rc;
+	struct file *f = file;
+	bool new_file_instance = false, modified_flags = false;
 
 	/*
 	 * For consistency, fail file's opened with the O_DIRECT flag on
@@ -453,15 +441,41 @@ int ima_calc_file_hash(struct file *file, struct ima_digest_data *hash)
 		return -EINVAL;
 	}
 
-	i_size = i_size_read(file_inode(file));
+	/* Open a new file instance in O_RDONLY if we cannot read */
+	if (!(file->f_mode & FMODE_READ)) {
+		int flags = file->f_flags & ~(O_WRONLY | O_APPEND |
+				O_TRUNC | O_CREAT | O_NOCTTY | O_EXCL);
+		flags |= O_RDONLY;
+		f = dentry_open(&file->f_path, flags, file->f_cred);
+		if (IS_ERR(f)) {
+			/*
+			 * Cannot open the file again, lets modify f_flags
+			 * of original and continue
+			 */
+			pr_info_ratelimited("Unable to reopen file for reading.\n");
+			f = file;
+			f->f_flags |= FMODE_READ;
+			modified_flags = true;
+		} else {
+			new_file_instance = true;
+		}
+	}
+
+	i_size = i_size_read(file_inode(f));
 
 	if (ima_ahash_minsize && i_size >= ima_ahash_minsize) {
-		rc = ima_calc_file_ahash(file, hash);
+		rc = ima_calc_file_ahash(f, hash);
 		if (!rc)
-			return 0;
+			goto out;
 	}
 
-	return ima_calc_file_shash(file, hash);
+	rc = ima_calc_file_shash(f, hash);
+out:
+	if (new_file_instance)
+		fput(f);
+	else if (modified_flags)
+		f->f_flags &= ~FMODE_READ;
+	return rc;
 }
 
 /*
-- 
2.20.1

[PATCH 4.14 047/115] KVM: arm/arm64: Ensure only THP is candidate for adjustment

[Greg Kroah-Hartman]

[ Upstream commit fd2ef358282c849c193aa36dadbf4f07f7dcd29b ]

PageTransCompoundMap() returns true for hugetlbfs and THP
hugepages. This behaviour incorrectly leads to stage 2 faults for
unsupported hugepage sizes (e.g., 64K hugepage with 4K pages) to be
treated as THP faults.

Tighten the check to filter out hugetlbfs pages. This also leads to
consistently mapping all unsupported hugepage sizes as PTE level
entries at stage 2.

Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 virt/kvm/arm/mmu.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/virt/kvm/arm/mmu.c b/virt/kvm/arm/mmu.c
index 225dc671ae31b..1f4cac53b9234 100644
--- a/virt/kvm/arm/mmu.c
+++ b/virt/kvm/arm/mmu.c
@@ -1068,8 +1068,14 @@ static bool transparent_hugepage_adjust(kvm_pfn_t *pfnp, phys_addr_t *ipap)
 {
 	kvm_pfn_t pfn = *pfnp;
 	gfn_t gfn = *ipap >> PAGE_SHIFT;
+	struct page *page = pfn_to_page(pfn);
 
-	if (PageTransCompoundMap(pfn_to_page(pfn))) {
+	/*
+	 * PageTransCompoungMap() returns true for THP and
+	 * hugetlbfs. Make sure the adjustment is done only for THP
+	 * pages.
+	 */
+	if (!PageHuge(page) && PageTransCompoundMap(page)) {
 		unsigned long mask;
 		/*
 		 * The address we faulted on is backed by a transparent huge
-- 
2.20.1

[PATCH 4.14 048/115] media: cec: make cec_get_edid_spa_location() an inline function

[Greg Kroah-Hartman]

[ Upstream commit b915bf575d5b7774d0f22d57d6c143e07dcaade2 ]

This function is needed by both V4L2 and CEC, so move this to
cec.h as a static inline since there are no obvious shared
modules between the two subsystems.

This patch, together with the following ones, fixes a
dependency bug: if CEC_CORE is disabled, then building adv7604
(and other HDMI receivers) will fail because an essential
function is now stubbed out.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org>      # for v4.17 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/media/cec/cec-edid.c | 60 -------------------------------
 include/media/cec.h          | 70 ++++++++++++++++++++++++++++++++++++
 2 files changed, 70 insertions(+), 60 deletions(-)

diff --git a/drivers/media/cec/cec-edid.c b/drivers/media/cec/cec-edid.c
index 38e3fec6152b5..19a31d4c86035 100644
--- a/drivers/media/cec/cec-edid.c
+++ b/drivers/media/cec/cec-edid.c
@@ -22,66 +22,6 @@
 #include <linux/types.h>
 #include <media/cec.h>
 
-/*
- * This EDID is expected to be a CEA-861 compliant, which means that there are
- * at least two blocks and one or more of the extensions blocks are CEA-861
- * blocks.
- *
- * The returned location is guaranteed to be < size - 1.
- */
-static unsigned int cec_get_edid_spa_location(const u8 *edid, unsigned int size)
-{
-	unsigned int blocks = size / 128;
-	unsigned int block;
-	u8 d;
-
-	/* Sanity check: at least 2 blocks and a multiple of the block size */
-	if (blocks < 2 || size % 128)
-		return 0;
-
-	/*
-	 * If there are fewer extension blocks than the size, then update
-	 * 'blocks'. It is allowed to have more extension blocks than the size,
-	 * since some hardware can only read e.g. 256 bytes of the EDID, even
-	 * though more blocks are present. The first CEA-861 extension block
-	 * should normally be in block 1 anyway.
-	 */
-	if (edid[0x7e] + 1 < blocks)
-		blocks = edid[0x7e] + 1;
-
-	for (block = 1; block < blocks; block++) {
-		unsigned int offset = block * 128;
-
-		/* Skip any non-CEA-861 extension blocks */
-		if (edid[offset] != 0x02 || edid[offset + 1] != 0x03)
-			continue;
-
-		/* search Vendor Specific Data Block (tag 3) */
-		d = edid[offset + 2] & 0x7f;
-		/* Check if there are Data Blocks */
-		if (d <= 4)
-			continue;
-		if (d > 4) {
-			unsigned int i = offset + 4;
-			unsigned int end = offset + d;
-
-			/* Note: 'end' is always < 'size' */
-			do {
-				u8 tag = edid[i] >> 5;
-				u8 len = edid[i] & 0x1f;
-
-				if (tag == 3 && len >= 5 && i + len <= end &&
-				    edid[i + 1] == 0x03 &&
-				    edid[i + 2] == 0x0c &&
-				    edid[i + 3] == 0x00)
-					return i + 4;
-				i += len + 1;
-			} while (i < end);
-		}
-	}
-	return 0;
-}
-
 u16 cec_get_edid_phys_addr(const u8 *edid, unsigned int size,
 			   unsigned int *offset)
 {
diff --git a/include/media/cec.h b/include/media/cec.h
index df6b3bd312849..b7339cc6fd3d6 100644
--- a/include/media/cec.h
+++ b/include/media/cec.h
@@ -435,4 +435,74 @@ static inline void cec_phys_addr_invalidate(struct cec_adapter *adap)
 	cec_s_phys_addr(adap, CEC_PHYS_ADDR_INVALID, false);
 }
 
+/**
+ * cec_get_edid_spa_location() - find location of the Source Physical Address
+ *
+ * @edid: the EDID
+ * @size: the size of the EDID
+ *
+ * This EDID is expected to be a CEA-861 compliant, which means that there are
+ * at least two blocks and one or more of the extensions blocks are CEA-861
+ * blocks.
+ *
+ * The returned location is guaranteed to be <= size-2.
+ *
+ * This is an inline function since it is used by both CEC and V4L2.
+ * Ideally this would go in a module shared by both, but it is overkill to do
+ * that for just a single function.
+ */
+static inline unsigned int cec_get_edid_spa_location(const u8 *edid,
+						     unsigned int size)
+{
+	unsigned int blocks = size / 128;
+	unsigned int block;
+	u8 d;
+
+	/* Sanity check: at least 2 blocks and a multiple of the block size */
+	if (blocks < 2 || size % 128)
+		return 0;
+
+	/*
+	 * If there are fewer extension blocks than the size, then update
+	 * 'blocks'. It is allowed to have more extension blocks than the size,
+	 * since some hardware can only read e.g. 256 bytes of the EDID, even
+	 * though more blocks are present. The first CEA-861 extension block
+	 * should normally be in block 1 anyway.
+	 */
+	if (edid[0x7e] + 1 < blocks)
+		blocks = edid[0x7e] + 1;
+
+	for (block = 1; block < blocks; block++) {
+		unsigned int offset = block * 128;
+
+		/* Skip any non-CEA-861 extension blocks */
+		if (edid[offset] != 0x02 || edid[offset + 1] != 0x03)
+			continue;
+
+		/* search Vendor Specific Data Block (tag 3) */
+		d = edid[offset + 2] & 0x7f;
+		/* Check if there are Data Blocks */
+		if (d <= 4)
+			continue;
+		if (d > 4) {
+			unsigned int i = offset + 4;
+			unsigned int end = offset + d;
+
+			/* Note: 'end' is always < 'size' */
+			do {
+				u8 tag = edid[i] >> 5;
+				u8 len = edid[i] & 0x1f;
+
+				if (tag == 3 && len >= 5 && i + len <= end &&
+				    edid[i + 1] == 0x03 &&
+				    edid[i + 2] == 0x0c &&
+				    edid[i + 3] == 0x00)
+					return i + 4;
+				i += len + 1;
+			} while (i < end);
+		}
+	}
+	return 0;
+}
+
 #endif /* _MEDIA_CEC_H */
-- 
2.20.1

[PATCH 4.14 049/115] media: cec: integrate cec_validate_phys_addr() in cec-api.c

[Greg Kroah-Hartman]

[ Upstream commit e81bff39489a06384822bb38ce7a59f9e365bbe9 ]

The cec_phys_addr_validate() function will be moved to V4L2,
so use a simplified variant of that function in cec-api.c.
cec now no longer calls cec_phys_addr_validate() and it can
be safely moved to V4L2.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org>      # for v4.17 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/media/cec/cec-api.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/drivers/media/cec/cec-api.c b/drivers/media/cec/cec-api.c
index a079f7fe018c4..21a5f45e0259e 100644
--- a/drivers/media/cec/cec-api.c
+++ b/drivers/media/cec/cec-api.c
@@ -113,6 +113,23 @@ static long cec_adap_g_phys_addr(struct cec_adapter *adap,
 	return 0;
 }
 
+static int cec_validate_phys_addr(u16 phys_addr)
+{
+	int i;
+
+	if (phys_addr == CEC_PHYS_ADDR_INVALID)
+		return 0;
+	for (i = 0; i < 16; i += 4)
+		if (phys_addr & (0xf << i))
+			break;
+	if (i == 16)
+		return 0;
+	for (i += 4; i < 16; i += 4)
+		if ((phys_addr & (0xf << i)) == 0)
+			return -EINVAL;
+	return 0;
+}
+
 static long cec_adap_s_phys_addr(struct cec_adapter *adap, struct cec_fh *fh,
 				 bool block, __u16 __user *parg)
 {
@@ -124,7 +141,7 @@ static long cec_adap_s_phys_addr(struct cec_adapter *adap, struct cec_fh *fh,
 	if (copy_from_user(&phys_addr, parg, sizeof(phys_addr)))
 		return -EFAULT;
 
-	err = cec_phys_addr_validate(phys_addr, NULL, NULL);
+	err = cec_validate_phys_addr(phys_addr);
 	if (err)
 		return err;
 	mutex_lock(&adap->lock);
-- 
2.20.1

[PATCH 4.14 050/115] media: adv7604: when the EDID is cleared, unconfigure CEC as well

[Greg Kroah-Hartman]

[ Upstream commit e7da89926f6dc6cf855f5ffdf79ef99a1b115ca7 ]

When there is no EDID the CEC adapter should be unconfigured as
well. So call cec_phys_addr_invalidate() when this happens.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org>      # for v4.18 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/media/i2c/adv7604.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
index d2108aad3c658..26c3ec573a565 100644
--- a/drivers/media/i2c/adv7604.c
+++ b/drivers/media/i2c/adv7604.c
@@ -2295,8 +2295,10 @@ static int adv76xx_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
 		state->aspect_ratio.numerator = 16;
 		state->aspect_ratio.denominator = 9;
 
-		if (!state->edid.present)
+		if (!state->edid.present) {
 			state->edid.blocks = 0;
+			cec_phys_addr_invalidate(state->cec_adap);
+		}
 
 		v4l2_dbg(2, debug, sd, "%s: clear EDID pad %d, edid.present = 0x%x\n",
 				__func__, edid->pad, state->edid.present);
-- 
2.20.1

[PATCH 4.14 051/115] media: adv7842: when the EDID is cleared, unconfigure CEC as well

[Greg Kroah-Hartman]

[ Upstream commit ab83203e181015b099720aff43ffabc1812e0fb3 ]

When there is no EDID the CEC adapter should be unconfigured as
well. So call cec_phys_addr_invalidate() when this happens.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org>      # for v4.18 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/media/i2c/adv7842.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/i2c/adv7842.c b/drivers/media/i2c/adv7842.c
index f9c23173c9fa0..dcce8d030e5db 100644
--- a/drivers/media/i2c/adv7842.c
+++ b/drivers/media/i2c/adv7842.c
@@ -799,8 +799,10 @@ static int edid_write_hdmi_segment(struct v4l2_subdev *sd, u8 port)
 	/* Disable I2C access to internal EDID ram from HDMI DDC ports */
 	rep_write_and_or(sd, 0x77, 0xf3, 0x00);
 
-	if (!state->hdmi_edid.present)
+	if (!state->hdmi_edid.present) {
+		cec_phys_addr_invalidate(state->cec_adap);
 		return 0;
+	}
 
 	pa = cec_get_edid_phys_addr(edid, 256, &spa_loc);
 	err = cec_phys_addr_validate(pa, &pa, NULL);
-- 
2.20.1

[PATCH 4.14 052/115] fuse: fix possibly missed wake-up after abort

[Greg Kroah-Hartman]

[ Upstream commit 2d84a2d19b6150c6dbac1e6ebad9c82e4c123772 ]

In current fuse_drop_waiting() implementation it's possible that
fuse_wait_aborted() will not be woken up in the unlikely case that
fuse_abort_conn() + fuse_wait_aborted() runs in between checking
fc->connected and calling atomic_dec(&fc->num_waiting).

Do the atomic_dec_and_test() unconditionally, which also provides the
necessary barrier against reordering with the fc->connected check.

The explicit smp_mb() in fuse_wait_aborted() is not actually needed, since
the spin_unlock() in fuse_abort_conn() provides the necessary RELEASE
barrier after resetting fc->connected.  However, this is not a performance
sensitive path, and adding the explicit barrier makes it easier to
document.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: b8f95e5d13f5 ("fuse: umount should wait for all requests")
Cc: <stable@vger.kernel.org> #v4.19
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/fuse/dev.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index 770733106d6d4..c934fab444529 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -133,9 +133,13 @@ static bool fuse_block_alloc(struct fuse_conn *fc, bool for_background)
 
 static void fuse_drop_waiting(struct fuse_conn *fc)
 {
-	if (fc->connected) {
-		atomic_dec(&fc->num_waiting);
-	} else if (atomic_dec_and_test(&fc->num_waiting)) {
+	/*
+	 * lockess check of fc->connected is okay, because atomic_dec_and_test()
+	 * provides a memory barrier mached with the one in fuse_wait_aborted()
+	 * to ensure no wake-up is missed.
+	 */
+	if (atomic_dec_and_test(&fc->num_waiting) &&
+	    !READ_ONCE(fc->connected)) {
 		/* wake up aborters */
 		wake_up_all(&fc->blocked_waitq);
 	}
@@ -2170,6 +2174,8 @@ EXPORT_SYMBOL_GPL(fuse_abort_conn);
 
 void fuse_wait_aborted(struct fuse_conn *fc)
 {
+	/* matches implicit memory barrier in fuse_drop_waiting() */
+	smp_mb();
 	wait_event(fc->blocked_waitq, atomic_read(&fc->num_waiting) == 0);
 }
 
-- 
2.20.1

[PATCH 4.14 053/115] i2c: omap: Enable for ARCH_K3

[Greg Kroah-Hartman]

[ Upstream commit 5b277402deac0691226a947df71c581686bd4020 ]

Allow I2C_OMAP to be built for K3 platforms.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/i2c/busses/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 45a3f3ca29b38..75ea367ffd833 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -759,7 +759,7 @@ config I2C_OCORES
 
 config I2C_OMAP
 	tristate "OMAP I2C adapter"
-	depends on ARCH_OMAP
+	depends on ARCH_OMAP || ARCH_K3
 	default y if MACH_OMAP_H3 || MACH_OMAP_OSK
 	help
 	  If you say yes to this option, support will be included for the
-- 
2.20.1

[PATCH 4.14 054/115] drm/i915: Disable LP3 watermarks on all SNB machines

[Greg Kroah-Hartman]

[ Upstream commit 03981c6ebec4fc7056b9b45f847393aeac90d060 ]

I have a Thinkpad X220 Tablet in my hands that is losing vblank
interrupts whenever LP3 watermarks are used.

If I nudge the latency value written to the WM3 register just
by one in either direction the problem disappears. That to me
suggests that the punit will not enter the corrsponding
powersave mode (MPLL shutdown IIRC) unless the latency value
in the register matches exactly what we read from SSKPD. Ie.
it's not really a latency value but rather just a cookie
by which the punit can identify the desired power saving state.
On HSW/BDW this was changed such that we actually just write
the WM level number into those bits, which makes much more
sense given the observed behaviour.

We could try to handle this by disallowing LP3 watermarks
only when vblank interrupts are enabled but we'd first have
to prove that only vblank interrupts are affected, which
seems unlikely. Also we can't grab the wm mutex from the
vblank enable/disable hooks because those are called with
various spinlocks held. Thus we'd have to redesigne the
watermark locking. So to play it safe and keep the code
simple we simply disable LP3 watermarks on all SNB machines.

To do that we simply zero out the latency values for
watermark level 3, and we adjust the watermark computation
to check for that. The behaviour now matches that of the
g4x/vlv/skl wm code in the presence of a zeroed latency
value.

v2: s/USHRT_MAX/U32_MAX/ for consistency with the types (Chris)

Cc: stable@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101269
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103713
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181114173440.6730-1-ville.syrjala@linux.intel.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpu/drm/i915/intel_pm.c | 41 ++++++++++++++++++++++++++++++++-
 1 file changed, 40 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 87cccb5f8c5da..96a5237741e0c 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -2471,6 +2471,9 @@ static uint32_t ilk_compute_pri_wm(const struct intel_crtc_state *cstate,
 	uint32_t method1, method2;
 	int cpp;
 
+	if (mem_value == 0)
+		return U32_MAX;
+
 	if (!intel_wm_plane_visible(cstate, pstate))
 		return 0;
 
@@ -2500,6 +2503,9 @@ static uint32_t ilk_compute_spr_wm(const struct intel_crtc_state *cstate,
 	uint32_t method1, method2;
 	int cpp;
 
+	if (mem_value == 0)
+		return U32_MAX;
+
 	if (!intel_wm_plane_visible(cstate, pstate))
 		return 0;
 
@@ -2523,6 +2529,9 @@ static uint32_t ilk_compute_cur_wm(const struct intel_crtc_state *cstate,
 {
 	int cpp;
 
+	if (mem_value == 0)
+		return U32_MAX;
+
 	if (!intel_wm_plane_visible(cstate, pstate))
 		return 0;
 
@@ -2981,6 +2990,34 @@ static void snb_wm_latency_quirk(struct drm_i915_private *dev_priv)
 	intel_print_wm_latency(dev_priv, "Cursor", dev_priv->wm.cur_latency);
 }
 
+static void snb_wm_lp3_irq_quirk(struct drm_i915_private *dev_priv)
+{
+	/*
+	 * On some SNB machines (Thinkpad X220 Tablet at least)
+	 * LP3 usage can cause vblank interrupts to be lost.
+	 * The DEIIR bit will go high but it looks like the CPU
+	 * never gets interrupted.
+	 *
+	 * It's not clear whether other interrupt source could
+	 * be affected or if this is somehow limited to vblank
+	 * interrupts only. To play it safe we disable LP3
+	 * watermarks entirely.
+	 */
+	if (dev_priv->wm.pri_latency[3] == 0 &&
+	    dev_priv->wm.spr_latency[3] == 0 &&
+	    dev_priv->wm.cur_latency[3] == 0)
+		return;
+
+	dev_priv->wm.pri_latency[3] = 0;
+	dev_priv->wm.spr_latency[3] = 0;
+	dev_priv->wm.cur_latency[3] = 0;
+
+	DRM_DEBUG_KMS("LP3 watermarks disabled due to potential for lost interrupts\n");
+	intel_print_wm_latency(dev_priv, "Primary", dev_priv->wm.pri_latency);
+	intel_print_wm_latency(dev_priv, "Sprite", dev_priv->wm.spr_latency);
+	intel_print_wm_latency(dev_priv, "Cursor", dev_priv->wm.cur_latency);
+}
+
 static void ilk_setup_wm_latency(struct drm_i915_private *dev_priv)
 {
 	intel_read_wm_latency(dev_priv, dev_priv->wm.pri_latency);
@@ -2997,8 +3034,10 @@ static void ilk_setup_wm_latency(struct drm_i915_private *dev_priv)
 	intel_print_wm_latency(dev_priv, "Sprite", dev_priv->wm.spr_latency);
 	intel_print_wm_latency(dev_priv, "Cursor", dev_priv->wm.cur_latency);
 
-	if (IS_GEN6(dev_priv))
+	if (IS_GEN6(dev_priv)) {
 		snb_wm_latency_quirk(dev_priv);
+		snb_wm_lp3_irq_quirk(dev_priv);
+	}
 }
 
 static void skl_setup_wm_latency(struct drm_i915_private *dev_priv)
-- 
2.20.1

[PATCH 4.14 055/115] media: ov5640: fix wrong binning value in exposure calculation

[Greg Kroah-Hartman]

[ Upstream commit c2c3f42df4dd9bb231d756bacb0c897f662c6d3c ]

ov5640_set_mode_exposure_calc() is checking binning value but
binning value read is buggy, fix this.
Rename ov5640_binning_on() to ov5640_get_binning() as per other
similar functions.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/media/i2c/ov5640.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 39a2269c0beef..0366c8dc6ecf7 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -1216,7 +1216,7 @@ static int ov5640_set_ae_target(struct ov5640_dev *sensor, int target)
 	return ov5640_write_reg(sensor, OV5640_REG_AEC_CTRL1F, fast_low);
 }
 
-static int ov5640_binning_on(struct ov5640_dev *sensor)
+static int ov5640_get_binning(struct ov5640_dev *sensor)
 {
 	u8 temp;
 	int ret;
@@ -1224,8 +1224,8 @@ static int ov5640_binning_on(struct ov5640_dev *sensor)
 	ret = ov5640_read_reg(sensor, OV5640_REG_TIMING_TC_REG21, &temp);
 	if (ret)
 		return ret;
-	temp &= 0xfe;
-	return temp ? 1 : 0;
+
+	return temp & BIT(0);
 }
 
 static int ov5640_set_virtual_channel(struct ov5640_dev *sensor)
@@ -1293,7 +1293,7 @@ static int ov5640_set_mode_exposure_calc(
 	if (ret < 0)
 		return ret;
 	prev_shutter = ret;
-	ret = ov5640_binning_on(sensor);
+	ret = ov5640_get_binning(sensor);
 	if (ret < 0)
 		return ret;
 	if (ret && mode->id != OV5640_MODE_720P_1280_720 &&
-- 
2.20.1

[PATCH 4.14 056/115] media: ov5640: fix auto controls values when switching to manual mode

[Greg Kroah-Hartman]

[ Upstream commit a8f438c684eaa4cbe6c98828eb996d5ec53e24fb ]

When switching from auto to manual mode, V4L2 core is calling
g_volatile_ctrl() in manual mode in order to get the manual initial value.
Remove the manual mode check/return to not break this behaviour.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/media/i2c/ov5640.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 0366c8dc6ecf7..acf5c8a55bbd2 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -1900,16 +1900,12 @@ static int ov5640_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
 
 	switch (ctrl->id) {
 	case V4L2_CID_AUTOGAIN:
-		if (!ctrl->val)
-			return 0;
 		val = ov5640_get_gain(sensor);
 		if (val < 0)
 			return val;
 		sensor->ctrls.gain->val = val;
 		break;
 	case V4L2_CID_EXPOSURE_AUTO:
-		if (ctrl->val == V4L2_EXPOSURE_MANUAL)
-			return 0;
 		val = ov5640_get_exposure(sensor);
 		if (val < 0)
 			return val;
-- 
2.20.1

[PATCH 4.14 057/115] net: dont keep lonely packets forever in the gro hash

[Greg Kroah-Hartman]

[ Upstream commit 605108acfe6233b72e2f803aa1cb59a2af3001ca ]

Eric noted that with UDP GRO and NAPI timeout, we could keep a single
UDP packet inside the GRO hash forever, if the related NAPI instance
calls napi_gro_complete() at an higher frequency than the NAPI timeout.
Willem noted that even TCP packets could be trapped there, till the
next retransmission.
This patch tries to address the issue, flushing the old packets -
those with a NAPI_GRO_CB age before the current jiffy - before scheduling
the NAPI timeout. The rationale is that such a timeout should be
well below a jiffy and we are not flushing packets eligible for sane GRO.

v1  -> v2:
 - clarified the commit message and comment

RFC -> v1:
 - added 'Fixes tags', cleaned-up the wording.

Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: 3b47d30396ba ("net: gro: add a per device gro flush timer")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/core/dev.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/net/core/dev.c b/net/core/dev.c
index 93a1b07990b8d..90ec30d5b8514 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -5308,11 +5308,14 @@ bool napi_complete_done(struct napi_struct *n, int work_done)
 		if (work_done)
 			timeout = n->dev->gro_flush_timeout;
 
+		/* When the NAPI instance uses a timeout and keeps postponing
+		 * it, we need to bound somehow the time packets are kept in
+		 * the GRO layer
+		 */
+		napi_gro_flush(n, !!timeout);
 		if (timeout)
 			hrtimer_start(&n->timer, ns_to_ktime(timeout),
 				      HRTIMER_MODE_REL_PINNED);
-		else
-			napi_gro_flush(n, false);
 	}
 	if (unlikely(!list_empty(&n->poll_list))) {
 		/* If n->poll_list is not empty, we need to mask irqs */
-- 
2.20.1

[PATCH 4.14 058/115] tracing/fgraph: Fix set_graph_function from showing interrupts

[Greg Kroah-Hartman]

[ Upstream commit 5cf99a0f3161bc3ae2391269d134d6bf7e26f00e ]

The tracefs file set_graph_function is used to only function graph functions
that are listed in that file (or all functions if the file is empty). The
way this is implemented is that the function graph tracer looks at every
function, and if the current depth is zero and the function matches
something in the file then it will trace that function. When other functions
are called, the depth will be greater than zero (because the original
function will be at depth zero), and all functions will be traced where the
depth is greater than zero.

The issue is that when a function is first entered, and the handler that
checks this logic is called, the depth is set to zero. If an interrupt comes
in and a function in the interrupt handler is traced, its depth will be
greater than zero and it will automatically be traced, even if the original
function was not. But because the logic only looks at depth it may trace
interrupts when it should not be.

The recent design change of the function graph tracer to fix other bugs
caused the depth to be zero while the function graph callback handler is
being called for a longer time, widening the race of this happening. This
bug was actually there for a longer time, but because the race window was so
small it seldom happened. The Fixes tag below is for the commit that widen
the race window, because that commit belongs to a series that will also help
fix the original bug.

Cc: stable@kernel.org
Fixes: 39eb456dacb5 ("function_graph: Use new curr_ret_depth to manage depth instead of curr_ret_stack")
Reported-by: Joe Lawrence <joe.lawrence@redhat.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 kernel/trace/trace.h                 | 57 ++++++++++++++++++++++++++--
 kernel/trace/trace_functions_graph.c |  4 ++
 kernel/trace/trace_irqsoff.c         |  2 +
 kernel/trace/trace_sched_wakeup.c    |  2 +
 4 files changed, 62 insertions(+), 3 deletions(-)

diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h
index 851cd16050857..a51e32de7c5f7 100644
--- a/kernel/trace/trace.h
+++ b/kernel/trace/trace.h
@@ -504,12 +504,44 @@ enum {
  * can only be modified by current, we can reuse trace_recursion.
  */
 	TRACE_IRQ_BIT,
+
+	/* Set if the function is in the set_graph_function file */
+	TRACE_GRAPH_BIT,
+
+	/*
+	 * In the very unlikely case that an interrupt came in
+	 * at a start of graph tracing, and we want to trace
+	 * the function in that interrupt, the depth can be greater
+	 * than zero, because of the preempted start of a previous
+	 * trace. In an even more unlikely case, depth could be 2
+	 * if a softirq interrupted the start of graph tracing,
+	 * followed by an interrupt preempting a start of graph
+	 * tracing in the softirq, and depth can even be 3
+	 * if an NMI came in at the start of an interrupt function
+	 * that preempted a softirq start of a function that
+	 * preempted normal context!!!! Luckily, it can't be
+	 * greater than 3, so the next two bits are a mask
+	 * of what the depth is when we set TRACE_GRAPH_BIT
+	 */
+
+	TRACE_GRAPH_DEPTH_START_BIT,
+	TRACE_GRAPH_DEPTH_END_BIT,
 };
 
 #define trace_recursion_set(bit)	do { (current)->trace_recursion |= (1<<(bit)); } while (0)
 #define trace_recursion_clear(bit)	do { (current)->trace_recursion &= ~(1<<(bit)); } while (0)
 #define trace_recursion_test(bit)	((current)->trace_recursion & (1<<(bit)))
 
+#define trace_recursion_depth() \
+	(((current)->trace_recursion >> TRACE_GRAPH_DEPTH_START_BIT) & 3)
+#define trace_recursion_set_depth(depth) \
+	do {								\
+		current->trace_recursion &=				\
+			~(3 << TRACE_GRAPH_DEPTH_START_BIT);		\
+		current->trace_recursion |=				\
+			((depth) & 3) << TRACE_GRAPH_DEPTH_START_BIT;	\
+	} while (0)
+
 #define TRACE_CONTEXT_BITS	4
 
 #define TRACE_FTRACE_START	TRACE_FTRACE_BIT
@@ -839,8 +871,9 @@ extern void __trace_graph_return(struct trace_array *tr,
 extern struct ftrace_hash *ftrace_graph_hash;
 extern struct ftrace_hash *ftrace_graph_notrace_hash;
 
-static inline int ftrace_graph_addr(unsigned long addr)
+static inline int ftrace_graph_addr(struct ftrace_graph_ent *trace)
 {
+	unsigned long addr = trace->func;
 	int ret = 0;
 
 	preempt_disable_notrace();
@@ -851,6 +884,14 @@ static inline int ftrace_graph_addr(unsigned long addr)
 	}
 
 	if (ftrace_lookup_ip(ftrace_graph_hash, addr)) {
+
+		/*
+		 * This needs to be cleared on the return functions
+		 * when the depth is zero.
+		 */
+		trace_recursion_set(TRACE_GRAPH_BIT);
+		trace_recursion_set_depth(trace->depth);
+
 		/*
 		 * If no irqs are to be traced, but a set_graph_function
 		 * is set, and called by an interrupt handler, we still
@@ -868,6 +909,13 @@ static inline int ftrace_graph_addr(unsigned long addr)
 	return ret;
 }
 
+static inline void ftrace_graph_addr_finish(struct ftrace_graph_ret *trace)
+{
+	if (trace_recursion_test(TRACE_GRAPH_BIT) &&
+	    trace->depth == trace_recursion_depth())
+		trace_recursion_clear(TRACE_GRAPH_BIT);
+}
+
 static inline int ftrace_graph_notrace_addr(unsigned long addr)
 {
 	int ret = 0;
@@ -881,7 +929,7 @@ static inline int ftrace_graph_notrace_addr(unsigned long addr)
 	return ret;
 }
 #else
-static inline int ftrace_graph_addr(unsigned long addr)
+static inline int ftrace_graph_addr(struct ftrace_graph_ent *trace)
 {
 	return 1;
 }
@@ -890,6 +938,8 @@ static inline int ftrace_graph_notrace_addr(unsigned long addr)
 {
 	return 0;
 }
+static inline void ftrace_graph_addr_finish(struct ftrace_graph_ret *trace)
+{ }
 #endif /* CONFIG_DYNAMIC_FTRACE */
 
 extern unsigned int fgraph_max_depth;
@@ -897,7 +947,8 @@ extern unsigned int fgraph_max_depth;
 static inline bool ftrace_graph_ignore_func(struct ftrace_graph_ent *trace)
 {
 	/* trace it when it is-nested-in or is a function enabled. */
-	return !(trace->depth || ftrace_graph_addr(trace->func)) ||
+	return !(trace_recursion_test(TRACE_GRAPH_BIT) ||
+		 ftrace_graph_addr(trace)) ||
 		(trace->depth < 0) ||
 		(fgraph_max_depth && trace->depth >= fgraph_max_depth);
 }
diff --git a/kernel/trace/trace_functions_graph.c b/kernel/trace/trace_functions_graph.c
index 169b3c44ee97f..72d0d477f5c16 100644
--- a/kernel/trace/trace_functions_graph.c
+++ b/kernel/trace/trace_functions_graph.c
@@ -482,6 +482,8 @@ void trace_graph_return(struct ftrace_graph_ret *trace)
 	int cpu;
 	int pc;
 
+	ftrace_graph_addr_finish(trace);
+
 	local_irq_save(flags);
 	cpu = raw_smp_processor_id();
 	data = per_cpu_ptr(tr->trace_buffer.data, cpu);
@@ -505,6 +507,8 @@ void set_graph_array(struct trace_array *tr)
 
 static void trace_graph_thresh_return(struct ftrace_graph_ret *trace)
 {
+	ftrace_graph_addr_finish(trace);
+
 	if (tracing_thresh &&
 	    (trace->rettime - trace->calltime < tracing_thresh))
 		return;
diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c
index 7758bc0617cb1..2d9e12380dc3b 100644
--- a/kernel/trace/trace_irqsoff.c
+++ b/kernel/trace/trace_irqsoff.c
@@ -204,6 +204,8 @@ static void irqsoff_graph_return(struct ftrace_graph_ret *trace)
 	unsigned long flags;
 	int pc;
 
+	ftrace_graph_addr_finish(trace);
+
 	if (!func_prolog_dec(tr, &data, &flags))
 		return;
 
diff --git a/kernel/trace/trace_sched_wakeup.c b/kernel/trace/trace_sched_wakeup.c
index 7d461dcd48318..0fa9dadf3f4f2 100644
--- a/kernel/trace/trace_sched_wakeup.c
+++ b/kernel/trace/trace_sched_wakeup.c
@@ -270,6 +270,8 @@ static void wakeup_graph_return(struct ftrace_graph_ret *trace)
 	unsigned long flags;
 	int pc;
 
+	ftrace_graph_addr_finish(trace);
+
 	if (!func_prolog_preempt_disable(tr, &data, &pc))
 		return;
 
-- 
2.20.1

[PATCH 4.14 059/115] drm/i915: Downgrade Gen9 Plane WM latency error

[Greg Kroah-Hartman]

[ Upstream commit 86c1c87d0e6241cbe35bd52badfc84b154e1b959 ]

According to intel_read_wm_latency() it is perfectly legal for one WM
and all subsequent levels to be 0 (and the deeper powersaving states
disabled), so don't shout *ERROR*, over and over again.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180726161527.10516-1-chris@chris-wilson.co.uk
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpu/drm/i915/intel_pm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 96a5237741e0c..cb377b003321a 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -2934,8 +2934,8 @@ static void intel_print_wm_latency(struct drm_i915_private *dev_priv,
 		unsigned int latency = wm[level];
 
 		if (latency == 0) {
-			DRM_ERROR("%s WM%d latency not provided\n",
-				  name, level);
+			DRM_DEBUG_KMS("%s WM%d latency not provided\n",
+				      name, level);
 			continue;
 		}
 
-- 
2.20.1

[PATCH 4.14 060/115] scsi: raid_attrs: fix unused variable warning

[Greg Kroah-Hartman]

[ Upstream commit 0eeec01488da9b1403c8c29e73eacac8af9e4bf2 ]

I ran into a new warning on randconfig kernels:

drivers/scsi/raid_class.c: In function 'raid_match':
drivers/scsi/raid_class.c:64:24: error: unused variable 'i' [-Werror=unused-variable]

This looks like a very old problem that for some reason was very hard to
run into, but it is very easy to fix, by replacing the incorrect #ifdef
with a simpler IS_ENABLED() check.

Fixes: fac829fdcaf4 ("[SCSI] raid_attrs: fix dependency problems")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/scsi/raid_class.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/scsi/raid_class.c b/drivers/scsi/raid_class.c
index 2c146b44d95fc..cddd78893b46c 100644
--- a/drivers/scsi/raid_class.c
+++ b/drivers/scsi/raid_class.c
@@ -63,8 +63,7 @@ static int raid_match(struct attribute_container *cont, struct device *dev)
 	 * emulated RAID devices, so start with SCSI */
 	struct raid_internal *i = ac_to_raid_internal(cont);
 
-#if defined(CONFIG_SCSI) || defined(CONFIG_SCSI_MODULE)
-	if (scsi_is_sdev_device(dev)) {
+	if (IS_ENABLED(CONFIG_SCSI) && scsi_is_sdev_device(dev)) {
 		struct scsi_device *sdev = to_scsi_device(dev);
 
 		if (i->f->cookie != sdev->host->hostt)
@@ -72,7 +71,6 @@ static int raid_match(struct attribute_container *cont, struct device *dev)
 
 		return i->f->is_raid(dev);
 	}
-#endif
 	/* FIXME: look at other subsystems too */
 	return 0;
 }
-- 
2.20.1

[PATCH 4.14 061/115] staging: olpc_dcon: add a missing dependency

[Greg Kroah-Hartman]

[ Upstream commit 33f49571d75024b1044cd02689ad2bdb4924cc80 ]

  WARNING: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE
    Depends on [n]: HAS_IOMEM [=y] && BACKLIGHT_LCD_SUPPORT [=n]
    Selected by [y]:
    - FB_OLPC_DCON [=y] && STAGING [=y] && X86 [=y] && OLPC [=y] && FB [=y]
                        && I2C [=y] && (GPIO_CS5535 [=n] || GPIO_CS5535 [=n]=n)

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/staging/olpc_dcon/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/staging/olpc_dcon/Kconfig b/drivers/staging/olpc_dcon/Kconfig
index d277f048789e6..8c6cc61d634bf 100644
--- a/drivers/staging/olpc_dcon/Kconfig
+++ b/drivers/staging/olpc_dcon/Kconfig
@@ -2,6 +2,7 @@ config FB_OLPC_DCON
 	tristate "One Laptop Per Child Display CONtroller support"
 	depends on OLPC && FB
 	depends on I2C
+	depends on BACKLIGHT_LCD_SUPPORT
 	depends on (GPIO_CS5535 || GPIO_CS5535=n)
 	select BACKLIGHT_CLASS_DEVICE
 	---help---
-- 
2.20.1

[PATCH 4.14 062/115] net: stmmac: Move debugfs init/exit to ->probe()/->remove()

[Greg Kroah-Hartman]

[ Upstream commit 5f2b8b62786853341a20d4cd4948f9cbca3db002 ]

Setting up and tearing down debugfs is current unbalanced, as seen by
this error during resume from suspend:

    [  752.134067] dwc-eth-dwmac 2490000.ethernet eth0: ERROR failed to create debugfs directory
    [  752.134347] dwc-eth-dwmac 2490000.ethernet eth0: stmmac_hw_setup: failed debugFS registration

The imbalance happens because the driver creates the debugfs hierarchy
when the device is opened and tears it down when the device is closed.
There's little gain in that, and it could be argued that it is even
surprising because it's not usually done for other devices. Fix the
imbalance by moving the debugfs creation and teardown to the driver's
->probe() and ->remove() implementations instead.

Note that the ring descriptors cannot be read while the interface is
down, so make sure to return an empty file when the descriptors_status
debugfs file is read.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 23 +++++++++++--------
 1 file changed, 13 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 0f85e540001ff..f4df9ab0aed5f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2530,12 +2530,6 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
 			netdev_warn(priv->dev, "PTP init failed\n");
 	}
 
-#ifdef CONFIG_DEBUG_FS
-	ret = stmmac_init_fs(dev);
-	if (ret < 0)
-		netdev_warn(priv->dev, "%s: failed debugFS registration\n",
-			    __func__);
-#endif
 	priv->tx_lpi_timer = STMMAC_DEFAULT_TWT_LS;
 
 	if ((priv->use_riwt) && (priv->hw->dma->rx_watchdog)) {
@@ -2729,10 +2723,6 @@ static int stmmac_release(struct net_device *dev)
 
 	netif_carrier_off(dev);
 
-#ifdef CONFIG_DEBUG_FS
-	stmmac_exit_fs(dev);
-#endif
-
 	stmmac_release_ptp(priv);
 
 	return 0;
@@ -3839,6 +3829,9 @@ static int stmmac_sysfs_ring_read(struct seq_file *seq, void *v)
 	u32 tx_count = priv->plat->tx_queues_to_use;
 	u32 queue;
 
+	if ((dev->flags & IFF_UP) == 0)
+		return 0;
+
 	for (queue = 0; queue < rx_count; queue++) {
 		struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
 
@@ -4310,6 +4303,13 @@ int stmmac_dvr_probe(struct device *device,
 		goto error_netdev_register;
 	}
 
+#ifdef CONFIG_DEBUG_FS
+	ret = stmmac_init_fs(ndev);
+	if (ret < 0)
+		netdev_warn(priv->dev, "%s: failed debugFS registration\n",
+			    __func__);
+#endif
+
 	return ret;
 
 error_netdev_register:
@@ -4343,6 +4343,9 @@ int stmmac_dvr_remove(struct device *dev)
 
 	netdev_info(priv->dev, "%s: removing driver", __func__);
 
+#ifdef CONFIG_DEBUG_FS
+	stmmac_exit_fs(ndev);
+#endif
 	stmmac_stop_all_dma(priv);
 
 	priv->hw->mac->set_mac(priv->ioaddr, false);
-- 
2.20.1

[PATCH 4.14 063/115] Btrfs: fix missing delayed iputs on unmount

[Greg Kroah-Hartman]

[ Upstream commit d6fd0ae25c6495674dc5a41a8d16bc8e0073276d ]

There's a race between close_ctree() and cleaner_kthread().
close_ctree() sets btrfs_fs_closing(), and the cleaner stops when it
sees it set, but this is racy; the cleaner might have already checked
the bit and could be cleaning stuff. In particular, if it deletes unused
block groups, it will create delayed iputs for the free space cache
inodes. As of "btrfs: don't run delayed_iputs in commit", we're no
longer running delayed iputs after a commit. Therefore, if the cleaner
creates more delayed iputs after delayed iputs are run in
btrfs_commit_super(), we will leak inodes on unmount and get a busy
inode crash from the VFS.

Fix it by parking the cleaner before we actually close anything. Then,
any remaining delayed iputs will always be handled in
btrfs_commit_super(). This also ensures that the commit in close_ctree()
is really the last commit, so we can get rid of the commit in
cleaner_kthread().

The fstest/generic/475 followed by 476 can trigger a crash that
manifests as a slab corruption caused by accessing the freed kthread
structure by a wake up function. Sample trace:

[ 5657.077612] BUG: unable to handle kernel NULL pointer dereference at 00000000000000cc
[ 5657.079432] PGD 1c57a067 P4D 1c57a067 PUD da10067 PMD 0
[ 5657.080661] Oops: 0000 [#1] PREEMPT SMP
[ 5657.081592] CPU: 1 PID: 5157 Comm: fsstress Tainted: G        W         4.19.0-rc8-default+ #323
[ 5657.083703] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626cc-prebuilt.qemu-project.org 04/01/2014
[ 5657.086577] RIP: 0010:shrink_page_list+0x2f9/0xe90
[ 5657.091937] RSP: 0018:ffffb5c745c8f728 EFLAGS: 00010287
[ 5657.092953] RAX: 0000000000000074 RBX: ffffb5c745c8f830 RCX: 0000000000000000
[ 5657.094590] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff9a8747fdf3d0
[ 5657.095987] RBP: ffffb5c745c8f9e0 R08: 0000000000000000 R09: 0000000000000000
[ 5657.097159] R10: ffff9a8747fdf5e8 R11: 0000000000000000 R12: ffffb5c745c8f788
[ 5657.098513] R13: ffff9a877f6ff2c0 R14: ffff9a877f6ff2c8 R15: dead000000000200
[ 5657.099689] FS:  00007f948d853b80(0000) GS:ffff9a877d600000(0000) knlGS:0000000000000000
[ 5657.101032] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5657.101953] CR2: 00000000000000cc CR3: 00000000684bd000 CR4: 00000000000006e0
[ 5657.103159] Call Trace:
[ 5657.103776]  shrink_inactive_list+0x194/0x410
[ 5657.104671]  shrink_node_memcg.constprop.84+0x39a/0x6a0
[ 5657.105750]  shrink_node+0x62/0x1c0
[ 5657.106529]  try_to_free_pages+0x1a4/0x500
[ 5657.107408]  __alloc_pages_slowpath+0x2c9/0xb20
[ 5657.108418]  __alloc_pages_nodemask+0x268/0x2b0
[ 5657.109348]  kmalloc_large_node+0x37/0x90
[ 5657.110205]  __kmalloc_node+0x236/0x310
[ 5657.111014]  kvmalloc_node+0x3e/0x70

Fixes: 30928e9baac2 ("btrfs: don't run delayed_iputs in commit")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add trace ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/btrfs/disk-io.c | 51 ++++++++++++++--------------------------------
 1 file changed, 15 insertions(+), 36 deletions(-)

diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index e0bdc0c902e44..813834552aa10 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -1688,9 +1688,8 @@ static int cleaner_kthread(void *arg)
 	struct btrfs_root *root = arg;
 	struct btrfs_fs_info *fs_info = root->fs_info;
 	int again;
-	struct btrfs_trans_handle *trans;
 
-	do {
+	while (1) {
 		again = 0;
 
 		/* Make the cleaner go to sleep early. */
@@ -1739,42 +1738,16 @@ static int cleaner_kthread(void *arg)
 		 */
 		btrfs_delete_unused_bgs(fs_info);
 sleep:
+		if (kthread_should_park())
+			kthread_parkme();
+		if (kthread_should_stop())
+			return 0;
 		if (!again) {
 			set_current_state(TASK_INTERRUPTIBLE);
-			if (!kthread_should_stop())
-				schedule();
+			schedule();
 			__set_current_state(TASK_RUNNING);
 		}
-	} while (!kthread_should_stop());
-
-	/*
-	 * Transaction kthread is stopped before us and wakes us up.
-	 * However we might have started a new transaction and COWed some
-	 * tree blocks when deleting unused block groups for example. So
-	 * make sure we commit the transaction we started to have a clean
-	 * shutdown when evicting the btree inode - if it has dirty pages
-	 * when we do the final iput() on it, eviction will trigger a
-	 * writeback for it which will fail with null pointer dereferences
-	 * since work queues and other resources were already released and
-	 * destroyed by the time the iput/eviction/writeback is made.
-	 */
-	trans = btrfs_attach_transaction(root);
-	if (IS_ERR(trans)) {
-		if (PTR_ERR(trans) != -ENOENT)
-			btrfs_err(fs_info,
-				  "cleaner transaction attach returned %ld",
-				  PTR_ERR(trans));
-	} else {
-		int ret;
-
-		ret = btrfs_commit_transaction(trans);
-		if (ret)
-			btrfs_err(fs_info,
-				  "cleaner open transaction commit returned %d",
-				  ret);
 	}
-
-	return 0;
 }
 
 static int transaction_kthread(void *arg)
@@ -3713,6 +3686,13 @@ void close_ctree(struct btrfs_fs_info *fs_info)
 	int ret;
 
 	set_bit(BTRFS_FS_CLOSING_START, &fs_info->flags);
+	/*
+	 * We don't want the cleaner to start new transactions, add more delayed
+	 * iputs, etc. while we're closing. We can't use kthread_stop() yet
+	 * because that frees the task_struct, and the transaction kthread might
+	 * still try to wake up the cleaner.
+	 */
+	kthread_park(fs_info->cleaner_kthread);
 
 	/* wait for the qgroup rescan worker to stop */
 	btrfs_qgroup_wait_for_completion(fs_info, false);
@@ -3740,9 +3720,8 @@ void close_ctree(struct btrfs_fs_info *fs_info)
 
 	if (!sb_rdonly(fs_info->sb)) {
 		/*
-		 * If the cleaner thread is stopped and there are
-		 * block groups queued for removal, the deletion will be
-		 * skipped when we quit the cleaner thread.
+		 * The cleaner kthread is stopped, so do one final pass over
+		 * unused block groups.
 		 */
 		btrfs_delete_unused_bgs(fs_info);
 
-- 
2.20.1

[PATCH 4.14 064/115] x86/vdso: Pass --eh-frame-hdr to the linker

[Greg Kroah-Hartman]

[ Upstream commit cd01544a268ad8ee5b1dfe42c4393f1095f86879 ]

Commit

  379d98ddf413 ("x86: vdso: Use $LD instead of $CC to link")

accidentally broke unwinding from userspace, because ld would strip the
.eh_frame sections when linking.

Originally, the compiler would implicitly add --eh-frame-hdr when
invoking the linker, but when this Makefile was converted from invoking
ld via the compiler, to invoking it directly (like vmlinux does),
the flag was missed. (The EH_FRAME section is important for the VDSO
shared libraries, but not for vmlinux.)

Fix the problem by explicitly specifying --eh-frame-hdr, which restores
parity with the old method.

See relevant bug reports for additional info:

  https://bugzilla.kernel.org/show_bug.cgi?id=201741
  https://bugzilla.redhat.com/show_bug.cgi?id=1659295

Fixes: 379d98ddf413 ("x86: vdso: Use $LD instead of $CC to link")
Reported-by: Florian Weimer <fweimer@redhat.com>
Reported-by: Carlos O'Donell <carlos@redhat.com>
Reported-by: "H. J. Lu" <hjl.tools@gmail.com>
Signed-off-by: Alistair Strachan <astrachan@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Carlos O'Donell <carlos@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: kernel-team@android.com
Cc: Laura Abbott <labbott@redhat.com>
Cc: stable <stable@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: X86 ML <x86@kernel.org>
Link: https://lkml.kernel.org/r/20181214223637.35954-1-astrachan@google.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/x86/entry/vdso/Makefile | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/x86/entry/vdso/Makefile b/arch/x86/entry/vdso/Makefile
index 839015f1b0de0..ab7f730cf7f22 100644
--- a/arch/x86/entry/vdso/Makefile
+++ b/arch/x86/entry/vdso/Makefile
@@ -182,7 +182,8 @@ quiet_cmd_vdso = VDSO    $@
 		 sh $(srctree)/$(src)/checkundef.sh '$(NM)' '$@'
 
 VDSO_LDFLAGS = -shared $(call ld-option, --hash-style=both) \
-	$(call ld-option, --build-id) -Bsymbolic
+	$(call ld-option, --build-id) $(call ld-option, --eh-frame-hdr) \
+	-Bsymbolic
 GCOV_PROFILE := n
 
 #
-- 
2.20.1

[PATCH 4.14 065/115] mm: introduce mm_[p4d|pud|pmd]_folded

[Greg Kroah-Hartman]

[ Upstream commit 1071fc5779d9846fec56a4ff6089ab08cac1ab72 ]

Add three architecture overrideable functions to test if the
p4d, pud, or pmd layer of a page table is folded or not.

Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 include/asm-generic/pgtable.h | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
index f00421dfacbd0..0c21014a38f23 100644
--- a/include/asm-generic/pgtable.h
+++ b/include/asm-generic/pgtable.h
@@ -1081,4 +1081,20 @@ static inline bool arch_has_pfn_modify_check(void)
 #endif
 #endif
 
+/*
+ * On some architectures it depends on the mm if the p4d/pud or pmd
+ * layer of the page table hierarchy is folded or not.
+ */
+#ifndef mm_p4d_folded
+#define mm_p4d_folded(mm)	__is_defined(__PAGETABLE_P4D_FOLDED)
+#endif
+
+#ifndef mm_pud_folded
+#define mm_pud_folded(mm)	__is_defined(__PAGETABLE_PUD_FOLDED)
+#endif
+
+#ifndef mm_pmd_folded
+#define mm_pmd_folded(mm)	__is_defined(__PAGETABLE_PMD_FOLDED)
+#endif
+
 #endif /* _ASM_GENERIC_PGTABLE_H */
-- 
2.20.1

[PATCH 4.14 066/115] arm64: KVM: Make VHE Stage-2 TLB invalidation operations non-interruptible

[Greg Kroah-Hartman]

[ Upstream commit c987876a80e7bcb98a839f10dca9ce7fda4feced ]

Contrary to the non-VHE version of the TLB invalidation helpers, the VHE
code  has interrupts enabled, meaning that we can take an interrupt in
the middle of such a sequence, and start running something else with
HCR_EL2.TGE cleared.

That's really not a good idea.

Take the heavy-handed option and disable interrupts in
__tlb_switch_to_guest_vhe, restoring them in __tlb_switch_to_host_vhe.
The latter also gain an ISB in order to make sure that TGE really has
taken effect.

Cc: stable@vger.kernel.org
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm64/kvm/hyp/tlb.c | 35 +++++++++++++++++++++++++----------
 1 file changed, 25 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/kvm/hyp/tlb.c b/arch/arm64/kvm/hyp/tlb.c
index 73464a96c3657..db23c6e5c885c 100644
--- a/arch/arm64/kvm/hyp/tlb.c
+++ b/arch/arm64/kvm/hyp/tlb.c
@@ -15,13 +15,18 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/irqflags.h>
+
 #include <asm/kvm_hyp.h>
 #include <asm/tlbflush.h>
 
-static void __hyp_text __tlb_switch_to_guest_vhe(struct kvm *kvm)
+static void __hyp_text __tlb_switch_to_guest_vhe(struct kvm *kvm,
+						 unsigned long *flags)
 {
 	u64 val;
 
+	local_irq_save(*flags);
+
 	/*
 	 * With VHE enabled, we have HCR_EL2.{E2H,TGE} = {1,1}, and
 	 * most TLB operations target EL2/EL0. In order to affect the
@@ -36,7 +41,8 @@ static void __hyp_text __tlb_switch_to_guest_vhe(struct kvm *kvm)
 	isb();
 }
 
-static void __hyp_text __tlb_switch_to_guest_nvhe(struct kvm *kvm)
+static void __hyp_text __tlb_switch_to_guest_nvhe(struct kvm *kvm,
+						  unsigned long *flags)
 {
 	write_sysreg(kvm->arch.vttbr, vttbr_el2);
 	isb();
@@ -47,7 +53,8 @@ static hyp_alternate_select(__tlb_switch_to_guest,
 			    __tlb_switch_to_guest_vhe,
 			    ARM64_HAS_VIRT_HOST_EXTN);
 
-static void __hyp_text __tlb_switch_to_host_vhe(struct kvm *kvm)
+static void __hyp_text __tlb_switch_to_host_vhe(struct kvm *kvm,
+						unsigned long flags)
 {
 	/*
 	 * We're done with the TLB operation, let's restore the host's
@@ -55,9 +62,12 @@ static void __hyp_text __tlb_switch_to_host_vhe(struct kvm *kvm)
 	 */
 	write_sysreg(0, vttbr_el2);
 	write_sysreg(HCR_HOST_VHE_FLAGS, hcr_el2);
+	isb();
+	local_irq_restore(flags);
 }
 
-static void __hyp_text __tlb_switch_to_host_nvhe(struct kvm *kvm)
+static void __hyp_text __tlb_switch_to_host_nvhe(struct kvm *kvm,
+						 unsigned long flags)
 {
 	write_sysreg(0, vttbr_el2);
 }
@@ -69,11 +79,13 @@ static hyp_alternate_select(__tlb_switch_to_host,
 
 void __hyp_text __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
 {
+	unsigned long flags;
+
 	dsb(ishst);
 
 	/* Switch to requested VMID */
 	kvm = kern_hyp_va(kvm);
-	__tlb_switch_to_guest()(kvm);
+	__tlb_switch_to_guest()(kvm, &flags);
 
 	/*
 	 * We could do so much better if we had the VA as well.
@@ -116,36 +128,39 @@ void __hyp_text __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
 	if (!has_vhe() && icache_is_vpipt())
 		__flush_icache_all();
 
-	__tlb_switch_to_host()(kvm);
+	__tlb_switch_to_host()(kvm, flags);
 }
 
 void __hyp_text __kvm_tlb_flush_vmid(struct kvm *kvm)
 {
+	unsigned long flags;
+
 	dsb(ishst);
 
 	/* Switch to requested VMID */
 	kvm = kern_hyp_va(kvm);
-	__tlb_switch_to_guest()(kvm);
+	__tlb_switch_to_guest()(kvm, &flags);
 
 	__tlbi(vmalls12e1is);
 	dsb(ish);
 	isb();
 
-	__tlb_switch_to_host()(kvm);
+	__tlb_switch_to_host()(kvm, flags);
 }
 
 void __hyp_text __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu)
 {
 	struct kvm *kvm = kern_hyp_va(kern_hyp_va(vcpu)->kvm);
+	unsigned long flags;
 
 	/* Switch to requested VMID */
-	__tlb_switch_to_guest()(kvm);
+	__tlb_switch_to_guest()(kvm, &flags);
 
 	__tlbi(vmalle1);
 	dsb(nsh);
 	isb();
 
-	__tlb_switch_to_host()(kvm);
+	__tlb_switch_to_host()(kvm, flags);
 }
 
 void __hyp_text __kvm_flush_vm_context(void)
-- 
2.20.1

[PATCH 4.14 067/115] crypto: testmgr - add AES-CFB tests

[Greg Kroah-Hartman]

[ Upstream commit 7da66670775d201f633577f5b15a4bbeebaaa2b0 ]

Add AES128/192/256-CFB testvectors from NIST SP800-38A.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 crypto/tcrypt.c  |  5 ++++
 crypto/testmgr.c |  7 +++++
 crypto/testmgr.h | 76 ++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 88 insertions(+)

diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c
index f7affe7cf0b47..76df552f099ba 100644
--- a/crypto/tcrypt.c
+++ b/crypto/tcrypt.c
@@ -1099,6 +1099,7 @@ static int do_test(const char *alg, u32 type, u32 mask, int m)
 		ret += tcrypt_test("xts(aes)");
 		ret += tcrypt_test("ctr(aes)");
 		ret += tcrypt_test("rfc3686(ctr(aes))");
+		ret += tcrypt_test("cfb(aes)");
 		break;
 
 	case 11:
@@ -1422,6 +1423,10 @@ static int do_test(const char *alg, u32 type, u32 mask, int m)
 				speed_template_16_24_32);
 		test_cipher_speed("ctr(aes)", DECRYPT, sec, NULL, 0,
 				speed_template_16_24_32);
+		test_cipher_speed("cfb(aes)", ENCRYPT, sec, NULL, 0,
+				speed_template_16_24_32);
+		test_cipher_speed("cfb(aes)", DECRYPT, sec, NULL, 0,
+				speed_template_16_24_32);
 		break;
 
 	case 201:
diff --git a/crypto/testmgr.c b/crypto/testmgr.c
index d91278c01ea89..e65c8228ea47a 100644
--- a/crypto/testmgr.c
+++ b/crypto/testmgr.c
@@ -2631,6 +2631,13 @@ static const struct alg_test_desc alg_test_descs[] = {
 				.dec = __VECS(aes_ccm_dec_tv_template)
 			}
 		}
+	}, {
+		.alg = "cfb(aes)",
+		.test = alg_test_skcipher,
+		.fips_allowed = 1,
+		.suite = {
+			.cipher = __VECS(aes_cfb_tv_template)
+		},
 	}, {
 		.alg = "chacha20",
 		.test = alg_test_skcipher,
diff --git a/crypto/testmgr.h b/crypto/testmgr.h
index 12835f072614f..5bd9c1400fee0 100644
--- a/crypto/testmgr.h
+++ b/crypto/testmgr.h
@@ -16071,6 +16071,82 @@ static const struct cipher_testvec aes_cbc_dec_tv_template[] = {
 	},
 };
 
+static const struct cipher_testvec aes_cfb_tv_template[] = {
+	{ /* From NIST SP800-38A */
+		.key	= "\x2b\x7e\x15\x16\x28\xae\xd2\xa6"
+			  "\xab\xf7\x15\x88\x09\xcf\x4f\x3c",
+		.klen	= 16,
+		.iv	= "\x00\x01\x02\x03\x04\x05\x06\x07"
+			  "\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f",
+		.ptext	= "\x6b\xc1\xbe\xe2\x2e\x40\x9f\x96"
+			  "\xe9\x3d\x7e\x11\x73\x93\x17\x2a"
+			  "\xae\x2d\x8a\x57\x1e\x03\xac\x9c"
+			  "\x9e\xb7\x6f\xac\x45\xaf\x8e\x51"
+			  "\x30\xc8\x1c\x46\xa3\x5c\xe4\x11"
+			  "\xe5\xfb\xc1\x19\x1a\x0a\x52\xef"
+			  "\xf6\x9f\x24\x45\xdf\x4f\x9b\x17"
+			  "\xad\x2b\x41\x7b\xe6\x6c\x37\x10",
+		.ctext	= "\x3b\x3f\xd9\x2e\xb7\x2d\xad\x20"
+			  "\x33\x34\x49\xf8\xe8\x3c\xfb\x4a"
+			  "\xc8\xa6\x45\x37\xa0\xb3\xa9\x3f"
+			  "\xcd\xe3\xcd\xad\x9f\x1c\xe5\x8b"
+			  "\x26\x75\x1f\x67\xa3\xcb\xb1\x40"
+			  "\xb1\x80\x8c\xf1\x87\xa4\xf4\xdf"
+			  "\xc0\x4b\x05\x35\x7c\x5d\x1c\x0e"
+			  "\xea\xc4\xc6\x6f\x9f\xf7\xf2\xe6",
+		.len	= 64,
+	}, {
+		.key	= "\x8e\x73\xb0\xf7\xda\x0e\x64\x52"
+			  "\xc8\x10\xf3\x2b\x80\x90\x79\xe5"
+			  "\x62\xf8\xea\xd2\x52\x2c\x6b\x7b",
+		.klen	= 24,
+		.iv	= "\x00\x01\x02\x03\x04\x05\x06\x07"
+			  "\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f",
+		.ptext	= "\x6b\xc1\xbe\xe2\x2e\x40\x9f\x96"
+			  "\xe9\x3d\x7e\x11\x73\x93\x17\x2a"
+			  "\xae\x2d\x8a\x57\x1e\x03\xac\x9c"
+			  "\x9e\xb7\x6f\xac\x45\xaf\x8e\x51"
+			  "\x30\xc8\x1c\x46\xa3\x5c\xe4\x11"
+			  "\xe5\xfb\xc1\x19\x1a\x0a\x52\xef"
+			  "\xf6\x9f\x24\x45\xdf\x4f\x9b\x17"
+			  "\xad\x2b\x41\x7b\xe6\x6c\x37\x10",
+		.ctext	= "\xcd\xc8\x0d\x6f\xdd\xf1\x8c\xab"
+			  "\x34\xc2\x59\x09\xc9\x9a\x41\x74"
+			  "\x67\xce\x7f\x7f\x81\x17\x36\x21"
+			  "\x96\x1a\x2b\x70\x17\x1d\x3d\x7a"
+			  "\x2e\x1e\x8a\x1d\xd5\x9b\x88\xb1"
+			  "\xc8\xe6\x0f\xed\x1e\xfa\xc4\xc9"
+			  "\xc0\x5f\x9f\x9c\xa9\x83\x4f\xa0"
+			  "\x42\xae\x8f\xba\x58\x4b\x09\xff",
+		.len	= 64,
+	}, {
+		.key	= "\x60\x3d\xeb\x10\x15\xca\x71\xbe"
+			  "\x2b\x73\xae\xf0\x85\x7d\x77\x81"
+			  "\x1f\x35\x2c\x07\x3b\x61\x08\xd7"
+			  "\x2d\x98\x10\xa3\x09\x14\xdf\xf4",
+		.klen	= 32,
+		.iv	= "\x00\x01\x02\x03\x04\x05\x06\x07"
+			  "\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f",
+		.ptext	= "\x6b\xc1\xbe\xe2\x2e\x40\x9f\x96"
+			  "\xe9\x3d\x7e\x11\x73\x93\x17\x2a"
+			  "\xae\x2d\x8a\x57\x1e\x03\xac\x9c"
+			  "\x9e\xb7\x6f\xac\x45\xaf\x8e\x51"
+			  "\x30\xc8\x1c\x46\xa3\x5c\xe4\x11"
+			  "\xe5\xfb\xc1\x19\x1a\x0a\x52\xef"
+			  "\xf6\x9f\x24\x45\xdf\x4f\x9b\x17"
+			  "\xad\x2b\x41\x7b\xe6\x6c\x37\x10",
+		.ctext	= "\xdc\x7e\x84\xbf\xda\x79\x16\x4b"
+			  "\x7e\xcd\x84\x86\x98\x5d\x38\x60"
+			  "\x39\xff\xed\x14\x3b\x28\xb1\xc8"
+			  "\x32\x11\x3c\x63\x31\xe5\x40\x7b"
+			  "\xdf\x10\x13\x24\x15\xe5\x4b\x92"
+			  "\xa1\x3e\xd0\xa8\x26\x7a\xe2\xf9"
+			  "\x75\xa3\x85\x74\x1a\xb9\xce\xf8"
+			  "\x20\x31\x62\x3d\x55\xb1\xe4\x71",
+		.len	= 64,
+	},
+};
+
 static const struct aead_testvec hmac_md5_ecb_cipher_null_enc_tv_template[] = {
 	{ /* Input data from RFC 2410 Case 1 */
 #ifdef __LITTLE_ENDIAN
-- 
2.20.1

[PATCH 4.14 068/115] powerpc: remove old GCC version checks

[Greg Kroah-Hartman]

[ Upstream commit f2910f0e6835339e6ce82cef22fa15718b7e3bfa ]

GCC 4.6 is the minimum supported now.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/powerpc/Makefile | 31 ++-----------------------------
 1 file changed, 2 insertions(+), 29 deletions(-)

diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 7452e50f4d1f8..0f04c878113ef 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -396,36 +396,9 @@ archprepare: checkbin
 # to stdout and these checks are run even on install targets.
 TOUT	:= .tmp_gas_check
 
-# Check gcc and binutils versions:
-# - gcc-3.4 and binutils-2.14 are a fatal combination
-# - Require gcc 4.0 or above on 64-bit
-# - gcc-4.2.0 has issues compiling modules on 64-bit
+# Check toolchain versions:
+# - gcc-4.6 is the minimum kernel-wide version so nothing required.
 checkbin:
-	@if test "$(cc-name)" != "clang" \
-	    && test "$(cc-version)" = "0304" ; then \
-		if ! /bin/echo mftb 5 | $(AS) -v -mppc -many -o $(TOUT) >/dev/null 2>&1 ; then \
-			echo -n '*** ${VERSION}.${PATCHLEVEL} kernels no longer build '; \
-			echo 'correctly with gcc-3.4 and your version of binutils.'; \
-			echo '*** Please upgrade your binutils or downgrade your gcc'; \
-			false; \
-		fi ; \
-	fi
-	@if test "$(cc-name)" != "clang" \
-	    && test "$(cc-version)" -lt "0400" \
-	    && test "x${CONFIG_PPC64}" = "xy" ; then \
-                echo -n "Sorry, GCC v4.0 or above is required to build " ; \
-                echo "the 64-bit powerpc kernel." ; \
-                false ; \
-        fi
-	@if test "$(cc-name)" != "clang" \
-	    && test "$(cc-fullversion)" = "040200" \
-	    && test "x${CONFIG_MODULES}${CONFIG_PPC64}" = "xyy" ; then \
-		echo -n '*** GCC-4.2.0 cannot compile the 64-bit powerpc ' ; \
-		echo 'kernel with modules enabled.' ; \
-		echo -n '*** Please use a different GCC version or ' ; \
-		echo 'disable kernel modules' ; \
-		false ; \
-	fi
 	@if test "x${CONFIG_CPU_LITTLE_ENDIAN}" = "xy" \
 	    && $(LD) --version | head -1 | grep ' 2\.24$$' >/dev/null ; then \
 		echo -n '*** binutils 2.24 miscompiles weak symbols ' ; \
-- 
2.20.1

[PATCH 4.14 069/115] leds: pwm: silently error out on EPROBE_DEFER

[Greg Kroah-Hartman]

[ Upstream commit 9aec30371fb095a0c9415f3f0146ae269c3713d8 ]

When probing, if we fail to get the pwm due to probe deferal, we shouldn't
print an error message. Just be silent in this case.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/leds/leds-pwm.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c
index 8d456dc6c5bfe..83f9bbe57e02b 100644
--- a/drivers/leds/leds-pwm.c
+++ b/drivers/leds/leds-pwm.c
@@ -101,8 +101,9 @@ static int led_pwm_add(struct device *dev, struct led_pwm_priv *priv,
 		led_data->pwm = devm_pwm_get(dev, led->name);
 	if (IS_ERR(led_data->pwm)) {
 		ret = PTR_ERR(led_data->pwm);
-		dev_err(dev, "unable to request PWM for %s: %d\n",
-			led->name, ret);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "unable to request PWM for %s: %d\n",
+				led->name, ret);
 		return ret;
 	}
 
-- 
2.20.1

[PATCH 4.14 070/115] drm/rockchip: psr: do not dereference encoder before it is null checked.

[Greg Kroah-Hartman]

[ Upstream commit 4eda776c3cefcb1f01b2d85bd8753f67606282b5 ]

'encoder' is dereferenced before it is null sanity checked, hence we
potentially have a null pointer dereference bug. Instead, initialise
drm_drv from encoder->dev->dev_private after we are sure 'encoder' is
not null.

Fixes: 5182c1a556d7f ("drm/rockchip: add an common abstracted PSR driver")
Cc: stable@vger.kernel.org
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20181013105654.11827-1-enric.balletbo@collabora.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpu/drm/rockchip/rockchip_drm_psr.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_psr.c b/drivers/gpu/drm/rockchip/rockchip_drm_psr.c
index a553e182ff538..32e7dba2bf5ea 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_psr.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_psr.c
@@ -221,13 +221,15 @@ EXPORT_SYMBOL(rockchip_drm_psr_flush_all);
 int rockchip_drm_psr_register(struct drm_encoder *encoder,
 			void (*psr_set)(struct drm_encoder *, bool enable))
 {
-	struct rockchip_drm_private *drm_drv = encoder->dev->dev_private;
+	struct rockchip_drm_private *drm_drv;
 	struct psr_drv *psr;
 	unsigned long flags;
 
 	if (!encoder || !psr_set)
 		return -EINVAL;
 
+	drm_drv = encoder->dev->dev_private;
+
 	psr = kzalloc(sizeof(struct psr_drv), GFP_KERNEL);
 	if (!psr)
 		return -ENOMEM;
-- 
2.20.1

[PATCH 4.14 071/115] RDMA/vmw_pvrdma: Return the correct opcode when creating WR

[Greg Kroah-Hartman]

[ Upstream commit 6325e01b6cdf4636b721cf7259c1616e3cf28ce2 ]

Since the IB_WR_REG_MR opcode value changed, let's set the PVRDMA device
opcodes explicitly.

Reported-by: Ruishuang Wang <ruishuangw@vmware.com>
Fixes: 9a59739bd01f ("IB/rxe: Revise the ib_wr_opcode enum")
Cc: stable@vger.kernel.org
Reviewed-by: Bryan Tan <bryantan@vmware.com>
Reviewed-by: Ruishuang Wang <ruishuangw@vmware.com>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/hw/vmw_pvrdma/pvrdma.h    | 35 +++++++++++++++++++-
 drivers/infiniband/hw/vmw_pvrdma/pvrdma_qp.c |  6 ++++
 include/uapi/rdma/vmw_pvrdma-abi.h           |  1 +
 3 files changed, 41 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/vmw_pvrdma/pvrdma.h b/drivers/infiniband/hw/vmw_pvrdma/pvrdma.h
index 984aa3484928d..4463e1c1a764e 100644
--- a/drivers/infiniband/hw/vmw_pvrdma/pvrdma.h
+++ b/drivers/infiniband/hw/vmw_pvrdma/pvrdma.h
@@ -407,7 +407,40 @@ static inline enum ib_qp_state pvrdma_qp_state_to_ib(enum pvrdma_qp_state state)
 
 static inline enum pvrdma_wr_opcode ib_wr_opcode_to_pvrdma(enum ib_wr_opcode op)
 {
-	return (enum pvrdma_wr_opcode)op;
+	switch (op) {
+	case IB_WR_RDMA_WRITE:
+		return PVRDMA_WR_RDMA_WRITE;
+	case IB_WR_RDMA_WRITE_WITH_IMM:
+		return PVRDMA_WR_RDMA_WRITE_WITH_IMM;
+	case IB_WR_SEND:
+		return PVRDMA_WR_SEND;
+	case IB_WR_SEND_WITH_IMM:
+		return PVRDMA_WR_SEND_WITH_IMM;
+	case IB_WR_RDMA_READ:
+		return PVRDMA_WR_RDMA_READ;
+	case IB_WR_ATOMIC_CMP_AND_SWP:
+		return PVRDMA_WR_ATOMIC_CMP_AND_SWP;
+	case IB_WR_ATOMIC_FETCH_AND_ADD:
+		return PVRDMA_WR_ATOMIC_FETCH_AND_ADD;
+	case IB_WR_LSO:
+		return PVRDMA_WR_LSO;
+	case IB_WR_SEND_WITH_INV:
+		return PVRDMA_WR_SEND_WITH_INV;
+	case IB_WR_RDMA_READ_WITH_INV:
+		return PVRDMA_WR_RDMA_READ_WITH_INV;
+	case IB_WR_LOCAL_INV:
+		return PVRDMA_WR_LOCAL_INV;
+	case IB_WR_REG_MR:
+		return PVRDMA_WR_FAST_REG_MR;
+	case IB_WR_MASKED_ATOMIC_CMP_AND_SWP:
+		return PVRDMA_WR_MASKED_ATOMIC_CMP_AND_SWP;
+	case IB_WR_MASKED_ATOMIC_FETCH_AND_ADD:
+		return PVRDMA_WR_MASKED_ATOMIC_FETCH_AND_ADD;
+	case IB_WR_REG_SIG_MR:
+		return PVRDMA_WR_REG_SIG_MR;
+	default:
+		return PVRDMA_WR_ERROR;
+	}
 }
 
 static inline enum ib_wc_status pvrdma_wc_status_to_ib(
diff --git a/drivers/infiniband/hw/vmw_pvrdma/pvrdma_qp.c b/drivers/infiniband/hw/vmw_pvrdma/pvrdma_qp.c
index d7162f2b7979a..4d9c99dd366b1 100644
--- a/drivers/infiniband/hw/vmw_pvrdma/pvrdma_qp.c
+++ b/drivers/infiniband/hw/vmw_pvrdma/pvrdma_qp.c
@@ -695,6 +695,12 @@ int pvrdma_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 		    wr->opcode == IB_WR_RDMA_WRITE_WITH_IMM)
 			wqe_hdr->ex.imm_data = wr->ex.imm_data;
 
+		if (unlikely(wqe_hdr->opcode == PVRDMA_WR_ERROR)) {
+			*bad_wr = wr;
+			ret = -EINVAL;
+			goto out;
+		}
+
 		switch (qp->ibqp.qp_type) {
 		case IB_QPT_GSI:
 		case IB_QPT_UD:
diff --git a/include/uapi/rdma/vmw_pvrdma-abi.h b/include/uapi/rdma/vmw_pvrdma-abi.h
index 912ea1556a0b0..fd801c7be1204 100644
--- a/include/uapi/rdma/vmw_pvrdma-abi.h
+++ b/include/uapi/rdma/vmw_pvrdma-abi.h
@@ -76,6 +76,7 @@ enum pvrdma_wr_opcode {
 	PVRDMA_WR_MASKED_ATOMIC_FETCH_AND_ADD,
 	PVRDMA_WR_BIND_MW,
 	PVRDMA_WR_REG_SIG_MR,
+	PVRDMA_WR_ERROR,
 };
 
 enum pvrdma_wc_status {
-- 
2.20.1

[PATCH 4.14 072/115] arm64: dts: marvell: armada-ap806: reserve PSCI area

[Greg Kroah-Hartman]

[ Upstream commit 132ac39cffbcfed80ada38ef0fc6d34d95da7be6 ]

The memory area [0x4000000-0x4200000[ is occupied by the PSCI firmware. Any
attempt to access it from Linux leads to an immediate crash.

So let's make the same memory reservation as the vendor kernel.

[gregory: added as comment that this region matches the mainline U-boot]
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index 30d48ecf46e08..27d2bd85d1ae9 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -65,6 +65,23 @@
 		method = "smc";
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * This area matches the mapping done with a
+		 * mainline U-Boot, and should be updated by the
+		 * bootloader.
+		 */
+
+		psci-area@4000000 {
+			reg = <0x0 0x4000000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
 	ap806 {
 		#address-cells = <2>;
 		#size-cells = <2>;
-- 
2.20.1

[PATCH 4.14 073/115] vt: always call notifier with the console lock held

[Greg Kroah-Hartman]

[ Upstream commit 7e1d226345f89ad5d0216a9092c81386c89b4983 ]

Every invocation of notify_write() and notify_update() is performed
under the console lock, except for one case. Let's fix that.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/tty/vt/vt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 1fb5e7f409c4a..6ff921cf9a9e4 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -2435,8 +2435,8 @@ static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int co
 	}
 	con_flush(vc, draw_from, draw_to, &draw_x);
 	console_conditional_schedule();
-	console_unlock();
 	notify_update(vc);
+	console_unlock();
 	return n;
 }
 
-- 
2.20.1

[PATCH 4.14 074/115] devres: Align data[] to ARCH_KMALLOC_MINALIGN

[Greg Kroah-Hartman]

[ Upstream commit a66d972465d15b1d89281258805eb8b47d66bd36 ]

Initially we bumped into problem with 32-bit aligned atomic64_t
on ARC, see [1]. And then during quite lengthly discussion Peter Z.
mentioned ARCH_KMALLOC_MINALIGN which IMHO makes perfect sense.
If allocation is done by plain kmalloc() obtained buffer will be
ARCH_KMALLOC_MINALIGN aligned and then why buffer obtained via
devm_kmalloc() should have any other alignment?

This way we at least get the same behavior for both types of
allocation.

[1] http://lists.infradead.org/pipermail/linux-snps-arc/2018-July/004009.html
[2] http://lists.infradead.org/pipermail/linux-snps-arc/2018-July/004036.html

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Greg KH <greg@kroah.com>
Cc: <stable@vger.kernel.org> # 4.8+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/base/devres.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/base/devres.c b/drivers/base/devres.c
index 71d577025285b..e43a04a495a31 100644
--- a/drivers/base/devres.c
+++ b/drivers/base/devres.c
@@ -25,8 +25,14 @@ struct devres_node {
 
 struct devres {
 	struct devres_node		node;
-	/* -- 3 pointers */
-	unsigned long long		data[];	/* guarantee ull alignment */
+	/*
+	 * Some archs want to perform DMA into kmalloc caches
+	 * and need a guaranteed alignment larger than
+	 * the alignment of a 64-bit integer.
+	 * Thus we use ARCH_KMALLOC_MINALIGN here and get exactly the same
+	 * buffer alignment as if it was allocated by plain kmalloc().
+	 */
+	u8 __aligned(ARCH_KMALLOC_MINALIGN) data[];
 };
 
 struct devres_group {
-- 
2.20.1

[PATCH 4.14 075/115] xtensa: xtfpga.dtsi: fix dtc warnings about SPI

[Greg Kroah-Hartman]

[ Upstream commit f37598be4e3896359e87c824be57ddddc280cc3f ]

Rename SPI controller node in the XTFPGA DTS to spi@...
This fixes the following build warnings:

arch/xtensa/boot/dts/kc705_nommu.dtb: Warning (spi_bus_bridge):
 /soc/spi-master@0d0a0000: node name for SPI buses should be 'spi'
arch/xtensa/boot/dts/kc705_nommu.dtb: Warning (spi_bus_reg):
 Failed prerequisite 'spi_bus_bridge'
arch/xtensa/boot/dts/lx200mx.dtb: Warning (spi_bus_bridge):
 /soc/spi-master@0d0a0000: node name for SPI buses should be 'spi'
arch/xtensa/boot/dts/lx200mx.dtb: Warning (spi_bus_reg):
 Failed prerequisite 'spi_bus_bridge'
arch/xtensa/boot/dts/kc705.dtb: Warning (spi_bus_bridge):
 /soc/spi-master@0d0a0000: node name for SPI buses should be 'spi'
arch/xtensa/boot/dts/kc705.dtb: Warning (spi_bus_reg):
 Failed prerequisite 'spi_bus_bridge'
arch/xtensa/boot/dts/ml605.dtb: Warning (spi_bus_bridge):
 /soc/spi-master@0d0a0000: node name for SPI buses should be 'spi'
arch/xtensa/boot/dts/ml605.dtb: Warning (spi_bus_reg):
 Failed prerequisite 'spi_bus_bridge'
arch/xtensa/boot/dts/lx60.dtb: Warning (spi_bus_bridge):
 /soc/spi-master@0d0a0000: node name for SPI buses should be 'spi'
arch/xtensa/boot/dts/lx60.dtb: Warning (spi_bus_reg):
 Failed prerequisite 'spi_bus_bridge'

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/xtensa/boot/dts/xtfpga.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/xtensa/boot/dts/xtfpga.dtsi b/arch/xtensa/boot/dts/xtfpga.dtsi
index 1090528825ec6..e46ae07bab059 100644
--- a/arch/xtensa/boot/dts/xtfpga.dtsi
+++ b/arch/xtensa/boot/dts/xtfpga.dtsi
@@ -103,7 +103,7 @@
 			};
 		};
 
-		spi0: spi-master@0d0a0000 {
+		spi0: spi@0d0a0000 {
 			compatible = "cdns,xtfpga-spi";
 			#address-cells = <1>;
 			#size-cells = <0>;
-- 
2.20.1

[PATCH 4.14 076/115] net_sched: fix two more memory leaks in cls_tcindex

[Greg Kroah-Hartman]

[ Upstream commit 1db817e75f5b9387b8db11e37d5f0624eb9223e0 ]

struct tcindex_filter_result contains two parts:
struct tcf_exts and struct tcf_result.

For the local variable 'cr', its exts part is never used but
initialized without being released properly on success path. So
just completely remove the exts part to fix this leak.

For the local variable 'new_filter_result', it is never properly
released if not used by 'r' on success path.

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/sched/cls_tcindex.c | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

diff --git a/net/sched/cls_tcindex.c b/net/sched/cls_tcindex.c
index 52829fdc280b3..75c7c7cc74999 100644
--- a/net/sched/cls_tcindex.c
+++ b/net/sched/cls_tcindex.c
@@ -322,9 +322,9 @@ tcindex_set_parms(struct net *net, struct tcf_proto *tp, unsigned long base,
 		  struct nlattr *est, bool ovr)
 {
 	struct tcindex_filter_result new_filter_result, *old_r = r;
-	struct tcindex_filter_result cr;
 	struct tcindex_data *cp = NULL, *oldp;
 	struct tcindex_filter *f = NULL; /* make gcc behave */
+	struct tcf_result cr = {};
 	int err, balloc = 0;
 	struct tcf_exts e;
 
@@ -363,13 +363,10 @@ tcindex_set_parms(struct net *net, struct tcf_proto *tp, unsigned long base,
 	cp->h = p->h;
 
 	err = tcindex_filter_result_init(&new_filter_result);
-	if (err < 0)
-		goto errout1;
-	err = tcindex_filter_result_init(&cr);
 	if (err < 0)
 		goto errout1;
 	if (old_r)
-		cr.res = r->res;
+		cr = r->res;
 
 	if (tb[TCA_TCINDEX_HASH])
 		cp->hash = nla_get_u32(tb[TCA_TCINDEX_HASH]);
@@ -460,8 +457,8 @@ tcindex_set_parms(struct net *net, struct tcf_proto *tp, unsigned long base,
 	}
 
 	if (tb[TCA_TCINDEX_CLASSID]) {
-		cr.res.classid = nla_get_u32(tb[TCA_TCINDEX_CLASSID]);
-		tcf_bind_filter(tp, &cr.res, base);
+		cr.classid = nla_get_u32(tb[TCA_TCINDEX_CLASSID]);
+		tcf_bind_filter(tp, &cr, base);
 	}
 
 	if (old_r && old_r != r) {
@@ -473,7 +470,7 @@ tcindex_set_parms(struct net *net, struct tcf_proto *tp, unsigned long base,
 	}
 
 	oldp = p;
-	r->res = cr.res;
+	r->res = cr;
 	tcf_exts_change(&r->exts, &e);
 
 	rcu_assign_pointer(tp->root, cp);
@@ -492,6 +489,8 @@ tcindex_set_parms(struct net *net, struct tcf_proto *tp, unsigned long base,
 				; /* nothing */
 
 		rcu_assign_pointer(*fp, f);
+	} else {
+		tcf_exts_destroy(&new_filter_result.exts);
 	}
 
 	if (oldp)
@@ -504,7 +503,6 @@ tcindex_set_parms(struct net *net, struct tcf_proto *tp, unsigned long base,
 	else if (balloc == 2)
 		kfree(cp->h);
 errout1:
-	tcf_exts_destroy(&cr.exts);
 	tcf_exts_destroy(&new_filter_result.exts);
 errout:
 	kfree(cp);
-- 
2.20.1

[PATCH 4.14 077/115] gtp: change NET_UDP_TUNNEL dependency to select

[Greg Kroah-Hartman]

[ Upstream commit c22da36688d6298f2e546dcc43fdc1ad35036467 ]

Similarly to commit a7603ac1fc8c ("geneve: change NET_UDP_TUNNEL
dependency to select"), GTP has a dependency on NET_UDP_TUNNEL which
makes impossible to compile it if no other protocol depending on
NET_UDP_TUNNEL is selected.

Fix this by changing the depends to a select, and drop NET_IP_TUNNEL from
the select list, as it already depends on NET_UDP_TUNNEL.

Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index aba0d652095b0..f3357091e9d18 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -212,8 +212,8 @@ config GENEVE
 
 config GTP
 	tristate "GPRS Tunneling Protocol datapath (GTP-U)"
-	depends on INET && NET_UDP_TUNNEL
-	select NET_IP_TUNNEL
+	depends on INET
+	select NET_UDP_TUNNEL
 	---help---
 	  This allows one to create gtp virtual interfaces that provide
 	  the GPRS Tunneling Protocol datapath (GTP-U). This tunneling protocol
-- 
2.20.1

[PATCH 4.14 078/115] ACPICA: Namespace: remove address node from global list after method termination

[Greg Kroah-Hartman]

[ Upstream commit c5781ffbbd4f742a58263458145fe7f0ac01d9e0 ]

ACPICA commit b233720031a480abd438f2e9c643080929d144c3

ASL operation_regions declare a range of addresses that it uses. In a
perfect world, the range of addresses should be used exclusively by
the AML interpreter. The OS can use this information to decide which
drivers to load so that the AML interpreter and device drivers use
different regions of memory.

During table load, the address information is added to a global
address range list. Each node in this list contains an address range
as well as a namespace node of the operation_region. This list is
deleted at ACPI shutdown.

Unfortunately, ASL operation_regions can be declared inside of control
methods. Although this is not recommended, modern firmware contains
such code. New module level code changes unintentionally removed the
functionality of adding and removing nodes to the global address
range list.

A few months ago, support for adding addresses has been re-
implemented. However, the removal of the address range list was
missed and resulted in some systems to crash due to the address list
containing bogus namespace nodes from operation_regions declared in
control methods. In order to fix the crash, this change removes
dynamic operation_regions after control method termination.

Link: https://github.com/acpica/acpica/commit/b2337200
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202475
Fixes: 4abb951b73ff ("ACPICA: AML interpreter: add region addresses in global list during initialization")
Reported-by: Michael J Gruber <mjg@fedoraproject.org>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Cc: 4.20+ <stable@vger.kernel.org> # 4.20+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/acpi/acpica/nsobject.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/acpi/acpica/nsobject.c b/drivers/acpi/acpica/nsobject.c
index 707b2aa501e1b..099be64242556 100644
--- a/drivers/acpi/acpica/nsobject.c
+++ b/drivers/acpi/acpica/nsobject.c
@@ -222,6 +222,10 @@ void acpi_ns_detach_object(struct acpi_namespace_node *node)
 		}
 	}
 
+	if (obj_desc->common.type == ACPI_TYPE_REGION) {
+		acpi_ut_remove_address_range(obj_desc->region.space_id, node);
+	}
+
 	/* Clear the Node entry in all cases */
 
 	node->object = NULL;
-- 
2.20.1

[PATCH 4.14 079/115] Input: elan_i2c - add hardware ID for multiple Lenovo laptops

[Greg Kroah-Hartman]

[ Upstream commit 738c06d0e4562e0acf9f2c7438a22b2d5afc67aa ]

There are many Lenovo laptops which need elan_i2c support, this patch adds
relevant IDs to the Elan driver so that touchpads are recognized.

Signed-off-by: KT Liao <kt.liao@emc.com.tw>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/input/mouse/elan_i2c_core.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c
index 2ce805d31ed13..ad89ba143a0e3 100644
--- a/drivers/input/mouse/elan_i2c_core.c
+++ b/drivers/input/mouse/elan_i2c_core.c
@@ -1254,22 +1254,47 @@ static const struct acpi_device_id elan_acpi_id[] = {
 	{ "ELAN0600", 0 },
 	{ "ELAN0601", 0 },
 	{ "ELAN0602", 0 },
+	{ "ELAN0603", 0 },
+	{ "ELAN0604", 0 },
 	{ "ELAN0605", 0 },
+	{ "ELAN0606", 0 },
+	{ "ELAN0607", 0 },
 	{ "ELAN0608", 0 },
 	{ "ELAN0605", 0 },
 	{ "ELAN0609", 0 },
 	{ "ELAN060B", 0 },
 	{ "ELAN060C", 0 },
+	{ "ELAN060F", 0 },
+	{ "ELAN0610", 0 },
 	{ "ELAN0611", 0 },
 	{ "ELAN0612", 0 },
+	{ "ELAN0615", 0 },
+	{ "ELAN0616", 0 },
 	{ "ELAN0617", 0 },
 	{ "ELAN0618", 0 },
+	{ "ELAN0619", 0 },
+	{ "ELAN061A", 0 },
+	{ "ELAN061B", 0 },
 	{ "ELAN061C", 0 },
 	{ "ELAN061D", 0 },
 	{ "ELAN061E", 0 },
+	{ "ELAN061F", 0 },
 	{ "ELAN0620", 0 },
 	{ "ELAN0621", 0 },
 	{ "ELAN0622", 0 },
+	{ "ELAN0623", 0 },
+	{ "ELAN0624", 0 },
+	{ "ELAN0625", 0 },
+	{ "ELAN0626", 0 },
+	{ "ELAN0627", 0 },
+	{ "ELAN0628", 0 },
+	{ "ELAN0629", 0 },
+	{ "ELAN062A", 0 },
+	{ "ELAN062B", 0 },
+	{ "ELAN062C", 0 },
+	{ "ELAN062D", 0 },
+	{ "ELAN0631", 0 },
+	{ "ELAN0632", 0 },
 	{ "ELAN1000", 0 },
 	{ }
 };
-- 
2.20.1

[PATCH 4.14 080/115] netfilter: nf_tables: warn when expr implements only one of activate/deactivate

[Greg Kroah-Hartman]

[ Upstream commit 0ef235c71755c5f36c50282fcf2d7d08709be344 ]

->destroy is only allowed to free data, or do other cleanups that do not
have side effects on other state, such as visibility to other netlink
requests.

Such things need to be done in ->deactivate.
As a transaction can fail, we need to make sure we can undo such
operations, therefore ->activate() has to be provided too.

So print a warning and refuse registration if expr->ops provides
only one of the two operations.

v2: fix nft_expr_check_ops to not repeat same check twice (Jones Desougi)

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/netfilter/nf_tables_api.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index c445d57e3a5bc..b149a72190846 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -220,6 +220,18 @@ static int nft_delchain(struct nft_ctx *ctx)
 	return err;
 }
 
+/* either expr ops provide both activate/deactivate, or neither */
+static bool nft_expr_check_ops(const struct nft_expr_ops *ops)
+{
+	if (!ops)
+		return true;
+
+	if (WARN_ON_ONCE((!ops->activate ^ !ops->deactivate)))
+		return false;
+
+	return true;
+}
+
 static void nft_rule_expr_activate(const struct nft_ctx *ctx,
 				   struct nft_rule *rule)
 {
@@ -1724,6 +1736,9 @@ static int nf_tables_delchain(struct net *net, struct sock *nlsk,
  */
 int nft_register_expr(struct nft_expr_type *type)
 {
+	if (!nft_expr_check_ops(type->ops))
+		return -EINVAL;
+
 	nfnl_lock(NFNL_SUBSYS_NFTABLES);
 	if (type->family == NFPROTO_UNSPEC)
 		list_add_tail_rcu(&type->list, &nf_tables_expressions);
@@ -1873,6 +1888,10 @@ static int nf_tables_expr_parse(const struct nft_ctx *ctx,
 			err = PTR_ERR(ops);
 			goto err1;
 		}
+		if (!nft_expr_check_ops(ops)) {
+			err = -EINVAL;
+			goto err1;
+		}
 	} else
 		ops = type->ops;
 
-- 
2.20.1

[PATCH 4.14 081/115] drm/rockchip: fix for mailbox read validation.

[Greg Kroah-Hartman]

[ Upstream commit e4056bbb6719fe713bfc4030ac78e8e97ddf7574 ]

This is basically the same fix as in
commit fa68d4f8476b ("drm/rockchip: fix for mailbox read size")
but for cdn_dp_mailbox_validate_receive function.

See patchwork.kernel.org/patch/10671981/ for details.

Signed-off-by: Damian Kos <dkos@cadence.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1542640463-18332-1-git-send-email-dkos@cadence.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpu/drm/rockchip/cdn-dp-reg.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/rockchip/cdn-dp-reg.c b/drivers/gpu/drm/rockchip/cdn-dp-reg.c
index 0ed7e91471f6e..4df201d21f271 100644
--- a/drivers/gpu/drm/rockchip/cdn-dp-reg.c
+++ b/drivers/gpu/drm/rockchip/cdn-dp-reg.c
@@ -113,7 +113,7 @@ static int cdp_dp_mailbox_write(struct cdn_dp_device *dp, u8 val)
 
 static int cdn_dp_mailbox_validate_receive(struct cdn_dp_device *dp,
 					   u8 module_id, u8 opcode,
-					   u8 req_size)
+					   u16 req_size)
 {
 	u32 mbox_size, i;
 	u8 header[4];
-- 
2.20.1

[PATCH 4.14 082/115] cifs: fix memory leak in SMB2_read

[Greg Kroah-Hartman]

[ Upstream commit 05fd5c2c61732152a6bddc318aae62d7e436629b ]

Commit 088aaf17aa79300cab14dbee2569c58cfafd7d6e introduced a leak where
if SMB2_read() returned an error we would return without freeing the
request buffer.

Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/cifs/smb2pdu.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c
index fd2d199dd413e..7936eac5a38a2 100644
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -2699,6 +2699,7 @@ SMB2_read(const unsigned int xid, struct cifs_io_parms *io_parms,
 			cifs_dbg(VFS, "Send error in read = %d\n", rc);
 		}
 		free_rsp_buf(resp_buftype, rsp_iov.iov_base);
+		cifs_small_buf_release(req);
 		return rc == -ENODATA ? 0 : rc;
 	}
 
-- 
2.20.1

[PATCH 4.14 083/115] x86/fpu: Dont export __kernel_fpu_{begin,end}()

[Greg Kroah-Hartman]

[ Upstream commit 12209993e98c5fa1855c467f22a24e3d5b8be205 ]

There is one user of __kernel_fpu_begin() and before invoking it,
it invokes preempt_disable(). So it could invoke kernel_fpu_begin()
right away. The 32bit version of arch_efi_call_virt_setup() and
arch_efi_call_virt_teardown() does this already.

The comment above *kernel_fpu*() claims that before invoking
__kernel_fpu_begin() preemption should be disabled and that KVM is a
good example of doing it. Well, KVM doesn't do that since commit

  f775b13eedee2 ("x86,kvm: move qemu/guest FPU switching out to vcpu_run")

so it is not an example anymore.

With EFI gone as the last user of __kernel_fpu_{begin|end}(), both can
be made static and not exported anymore.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Nicolai Stange <nstange@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm ML <kvm@vger.kernel.org>
Cc: linux-efi <linux-efi@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20181129150210.2k4mawt37ow6c2vq@linutronix.de
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/x86/include/asm/efi.h     |  6 ++----
 arch/x86/include/asm/fpu/api.h | 15 +++++----------
 arch/x86/kernel/fpu/core.c     |  6 ++----
 3 files changed, 9 insertions(+), 18 deletions(-)

diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
index a399c1ebf6f0e..96fd0251f8f57 100644
--- a/arch/x86/include/asm/efi.h
+++ b/arch/x86/include/asm/efi.h
@@ -82,8 +82,7 @@ struct efi_scratch {
 #define arch_efi_call_virt_setup()					\
 ({									\
 	efi_sync_low_kernel_mappings();					\
-	preempt_disable();						\
-	__kernel_fpu_begin();						\
+	kernel_fpu_begin();						\
 	firmware_restrict_branch_speculation_start();			\
 									\
 	if (efi_scratch.use_pgd) {					\
@@ -104,8 +103,7 @@ struct efi_scratch {
 	}								\
 									\
 	firmware_restrict_branch_speculation_end();			\
-	__kernel_fpu_end();						\
-	preempt_enable();						\
+	kernel_fpu_end();						\
 })
 
 extern void __iomem *__init efi_ioremap(unsigned long addr, unsigned long size,
diff --git a/arch/x86/include/asm/fpu/api.h b/arch/x86/include/asm/fpu/api.h
index a9caac9d4a729..b56d504af6545 100644
--- a/arch/x86/include/asm/fpu/api.h
+++ b/arch/x86/include/asm/fpu/api.h
@@ -12,17 +12,12 @@
 #define _ASM_X86_FPU_API_H
 
 /*
- * Careful: __kernel_fpu_begin/end() must be called with preempt disabled
- * and they don't touch the preempt state on their own.
- * If you enable preemption after __kernel_fpu_begin(), preempt notifier
- * should call the __kernel_fpu_end() to prevent the kernel/user FPU
- * state from getting corrupted. KVM for example uses this model.
- *
- * All other cases use kernel_fpu_begin/end() which disable preemption
- * during kernel FPU usage.
+ * Use kernel_fpu_begin/end() if you intend to use FPU in kernel context. It
+ * disables preemption so be careful if you intend to use it for long periods
+ * of time.
+ * If you intend to use the FPU in softirq you need to check first with
+ * irq_fpu_usable() if it is possible.
  */
-extern void __kernel_fpu_begin(void);
-extern void __kernel_fpu_end(void);
 extern void kernel_fpu_begin(void);
 extern void kernel_fpu_end(void);
 extern bool irq_fpu_usable(void);
diff --git a/arch/x86/kernel/fpu/core.c b/arch/x86/kernel/fpu/core.c
index 2ea85b32421a0..2e5003fef51a9 100644
--- a/arch/x86/kernel/fpu/core.c
+++ b/arch/x86/kernel/fpu/core.c
@@ -93,7 +93,7 @@ bool irq_fpu_usable(void)
 }
 EXPORT_SYMBOL(irq_fpu_usable);
 
-void __kernel_fpu_begin(void)
+static void __kernel_fpu_begin(void)
 {
 	struct fpu *fpu = &current->thread.fpu;
 
@@ -111,9 +111,8 @@ void __kernel_fpu_begin(void)
 		__cpu_invalidate_fpregs_state();
 	}
 }
-EXPORT_SYMBOL(__kernel_fpu_begin);
 
-void __kernel_fpu_end(void)
+static void __kernel_fpu_end(void)
 {
 	struct fpu *fpu = &current->thread.fpu;
 
@@ -122,7 +121,6 @@ void __kernel_fpu_end(void)
 
 	kernel_fpu_enable();
 }
-EXPORT_SYMBOL(__kernel_fpu_end);
 
 void kernel_fpu_begin(void)
 {
-- 
2.20.1

[PATCH 4.14 084/115] net: hns: Fix WARNING when hns modules installed

[Greg Kroah-Hartman]

[ Upstream commit c77804be53369dd4c15bfc376cf9b45948194cab ]

Commit 308c6cafde01 ("net: hns: All ports can not work when insmod hns ko
after rmmod.") add phy_stop in hns_nic_init_phy(), In the branch of "net",
this method is effective, but in the branch of "net-next", it will cause
a WARNING when hns modules loaded, reference to commit 2b3e88ea6528 ("net:
phy: improve phy state checking"):

[10.092168] ------------[ cut here ]------------
[10.092171] called from state READY
[10.092189] WARNING: CPU: 4 PID: 1 at ../drivers/net/phy/phy.c:854
                phy_stop+0x90/0xb0
[10.092192] Modules linked in:
[10.092197] CPU: 4 PID:1 Comm:swapper/0 Not tainted 4.20.0-rc7-next-20181220 #1
[10.092200] Hardware name: Huawei TaiShan 2280 /D05, BIOS Hisilicon D05 UEFI
                16.12 Release 05/15/2017
[10.092202] pstate: 60000005 (nZCv daif -PAN -UAO)
[10.092205] pc : phy_stop+0x90/0xb0
[10.092208] lr : phy_stop+0x90/0xb0
[10.092209] sp : ffff00001159ba90
[10.092212] x29: ffff00001159ba90 x28: 0000000000000007
[10.092215] x27: ffff000011180068 x26: ffff0000110a5620
[10.092218] x25: ffff0000113b6000 x24: ffff842f96dac000
[10.092221] x23: 0000000000000000 x22: 0000000000000000
[10.092223] x21: ffff841fb8425e18 x20: ffff801fb3a56438
[10.092226] x19: ffff801fb3a56000 x18: ffffffffffffffff
[10.092228] x17: 0000000000000000 x16: 0000000000000000
[10.092231] x15: ffff00001122d6c8 x14: ffff00009159b7b7
[10.092234] x13: ffff00001159b7c5 x12: ffff000011245000
[10.092236] x11: 0000000005f5e0ff x10: ffff00001159b750
[10.092239] x9 : 00000000ffffffd0 x8 : 0000000000000465
[10.092242] x7 : ffff0000112457f8 x6 : ffff0000113bd7ce
[10.092245] x5 : 0000000000000000 x4 : 0000000000000000
[10.092247] x3 : 00000000ffffffff x2 : ffff000011245828
[10.092250] x1 : 4b5860bd05871300 x0 : 0000000000000000
[10.092253] Call trace:
[10.092255]  phy_stop+0x90/0xb0
[10.092260]  hns_nic_init_phy+0xf8/0x110
[10.092262]  hns_nic_try_get_ae+0x4c/0x3b0
[10.092264]  hns_nic_dev_probe+0x1fc/0x480
[10.092268]  platform_drv_probe+0x50/0xa0
[10.092271]  really_probe+0x1f4/0x298
[10.092273]  driver_probe_device+0x58/0x108
[10.092275]  __driver_attach+0xdc/0xe0
[10.092278]  bus_for_each_dev+0x74/0xc8
[10.092280]  driver_attach+0x20/0x28
[10.092283]  bus_add_driver+0x1b8/0x228
[10.092285]  driver_register+0x60/0x110
[10.092288]  __platform_driver_register+0x40/0x48
[10.092292]  hns_nic_dev_driver_init+0x18/0x20
[10.092296]  do_one_initcall+0x5c/0x180
[10.092299]  kernel_init_freeable+0x198/0x240
[10.092303]  kernel_init+0x10/0x108
[10.092306]  ret_from_fork+0x10/0x18
[10.092308] ---[ end trace 1396dd0278e397eb ]---

This WARNING occurred because of calling phy_stop before phy_start.

The root cause of the problem in commit '308c6cafde01' is:

Reference to hns_nic_init_phy, the flag phydev->supported is changed after
phy_connect_direct. The flag phydev->supported is 0x6ff when hns modules is
loaded, so will not change Fiber Port power(Reference to marvell.c), which
is power on at default.
Then the flag phydev->supported is changed to 0x6f, so Fiber Port power is
off when removing hns modules.
When hns modules installed again, the flag phydev->supported is default
value 0x6ff, so will not change Fiber Port power(now is off), causing mac
link not up problem.

So the solution is change phy flags before phy_connect_direct.

Fixes: 308c6cafde01 ("net: hns: All ports can not work when insmod hns ko after rmmod.")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/hisilicon/hns/hns_enet.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
index 8fd0408178048..b681c07b33fb6 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
@@ -1267,6 +1267,12 @@ int hns_nic_init_phy(struct net_device *ndev, struct hnae_handle *h)
 	if (!h->phy_dev)
 		return 0;
 
+	phy_dev->supported &= h->if_support;
+	phy_dev->advertising = phy_dev->supported;
+
+	if (h->phy_if == PHY_INTERFACE_MODE_XGMII)
+		phy_dev->autoneg = false;
+
 	if (h->phy_if != PHY_INTERFACE_MODE_XGMII) {
 		phy_dev->dev_flags = 0;
 
@@ -1278,15 +1284,6 @@ int hns_nic_init_phy(struct net_device *ndev, struct hnae_handle *h)
 	if (unlikely(ret))
 		return -ENODEV;
 
-	phy_dev->supported &= h->if_support;
-	phy_dev->advertising = phy_dev->supported;
-
-	if (h->phy_if == PHY_INTERFACE_MODE_XGMII)
-		phy_dev->autoneg = false;
-
-	if (h->phy_if == PHY_INTERFACE_MODE_SGMII)
-		phy_stop(phy_dev);
-
 	return 0;
 }
 
-- 
2.20.1

[PATCH 4.14 085/115] mm/memory.c: fix modifying of page protection by insert_pfn()

[Greg Kroah-Hartman]

[ Upstream commit cae85cb8add35f678cf487139d05e083ce2f570a ]

Aneesh has reported that PPC triggers the following warning when
excercising DAX code:

  IP set_pte_at+0x3c/0x190
  LR insert_pfn+0x208/0x280
  Call Trace:
     insert_pfn+0x68/0x280
     dax_iomap_pte_fault.isra.7+0x734/0xa40
     __xfs_filemap_fault+0x280/0x2d0
     do_wp_page+0x48c/0xa40
     __handle_mm_fault+0x8d0/0x1fd0
     handle_mm_fault+0x140/0x250
     __do_page_fault+0x300/0xd60
     handle_page_fault+0x18

Now that is WARN_ON in set_pte_at which is

        VM_WARN_ON(pte_hw_valid(*ptep) && !pte_protnone(*ptep));

The problem is that on some architectures set_pte_at() cannot cope with
a situation where there is already some (different) valid entry present.

Use ptep_set_access_flags() instead to modify the pfn which is built to
deal with modifying existing PTE.

Link: http://lkml.kernel.org/r/20190311084537.16029-1-jack@suse.cz
Fixes: b2770da64254 "mm: add vm_insert_mixed_mkwrite()"
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Chandan Rajendra <chandan@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 mm/memory.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/mm/memory.c b/mm/memory.c
index f99b64ca13031..e9bce27bc18c3 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1813,10 +1813,12 @@ static int insert_pfn(struct vm_area_struct *vma, unsigned long addr,
 				WARN_ON_ONCE(!is_zero_pfn(pte_pfn(*pte)));
 				goto out_unlock;
 			}
-			entry = *pte;
-			goto out_mkwrite;
-		} else
-			goto out_unlock;
+			entry = pte_mkyoung(*pte);
+			entry = maybe_mkwrite(pte_mkdirty(entry), vma);
+			if (ptep_set_access_flags(vma, addr, pte, entry, 1))
+				update_mmu_cache(vma, addr, pte);
+		}
+		goto out_unlock;
 	}
 
 	/* Ok, finally just insert the thing.. */
@@ -1825,7 +1827,6 @@ static int insert_pfn(struct vm_area_struct *vma, unsigned long addr,
 	else
 		entry = pte_mkspecial(pfn_t_pte(pfn, prot));
 
-out_mkwrite:
 	if (mkwrite) {
 		entry = pte_mkyoung(entry);
 		entry = maybe_mkwrite(pte_mkdirty(entry), vma);
-- 
2.20.1

[PATCH 4.14 086/115] net: fec: manage ahb clock in runtime pm

[Greg Kroah-Hartman]

[ Upstream commit d7c3a206e6338e4ccdf030719dec028e26a521d5 ]

Some SOC like i.MX6SX clock have some limits:
- ahb clock should be disabled before ipg.
- ahb and ipg clocks are required for MAC MII bus.
So, move the ahb clock to runtime management together with
ipg clock.

Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/freescale/fec_main.c | 30 ++++++++++++++++-------
 1 file changed, 21 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index ce55c8f7f33a4..ad3aabc39cc24 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -1851,13 +1851,9 @@ static int fec_enet_clk_enable(struct net_device *ndev, bool enable)
 	int ret;
 
 	if (enable) {
-		ret = clk_prepare_enable(fep->clk_ahb);
-		if (ret)
-			return ret;
-
 		ret = clk_prepare_enable(fep->clk_enet_out);
 		if (ret)
-			goto failed_clk_enet_out;
+			return ret;
 
 		if (fep->clk_ptp) {
 			mutex_lock(&fep->ptp_clk_mutex);
@@ -1875,7 +1871,6 @@ static int fec_enet_clk_enable(struct net_device *ndev, bool enable)
 		if (ret)
 			goto failed_clk_ref;
 	} else {
-		clk_disable_unprepare(fep->clk_ahb);
 		clk_disable_unprepare(fep->clk_enet_out);
 		if (fep->clk_ptp) {
 			mutex_lock(&fep->ptp_clk_mutex);
@@ -1894,8 +1889,6 @@ static int fec_enet_clk_enable(struct net_device *ndev, bool enable)
 failed_clk_ptp:
 	if (fep->clk_enet_out)
 		clk_disable_unprepare(fep->clk_enet_out);
-failed_clk_enet_out:
-		clk_disable_unprepare(fep->clk_ahb);
 
 	return ret;
 }
@@ -3455,6 +3448,9 @@ fec_probe(struct platform_device *pdev)
 	ret = clk_prepare_enable(fep->clk_ipg);
 	if (ret)
 		goto failed_clk_ipg;
+	ret = clk_prepare_enable(fep->clk_ahb);
+	if (ret)
+		goto failed_clk_ahb;
 
 	fep->reg_phy = devm_regulator_get(&pdev->dev, "phy");
 	if (!IS_ERR(fep->reg_phy)) {
@@ -3546,6 +3542,9 @@ fec_probe(struct platform_device *pdev)
 	pm_runtime_put(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 failed_regulator:
+	clk_disable_unprepare(fep->clk_ahb);
+failed_clk_ahb:
+	clk_disable_unprepare(fep->clk_ipg);
 failed_clk_ipg:
 	fec_enet_clk_enable(ndev, false);
 failed_clk:
@@ -3669,6 +3668,7 @@ static int __maybe_unused fec_runtime_suspend(struct device *dev)
 	struct net_device *ndev = dev_get_drvdata(dev);
 	struct fec_enet_private *fep = netdev_priv(ndev);
 
+	clk_disable_unprepare(fep->clk_ahb);
 	clk_disable_unprepare(fep->clk_ipg);
 
 	return 0;
@@ -3678,8 +3678,20 @@ static int __maybe_unused fec_runtime_resume(struct device *dev)
 {
 	struct net_device *ndev = dev_get_drvdata(dev);
 	struct fec_enet_private *fep = netdev_priv(ndev);
+	int ret;
 
-	return clk_prepare_enable(fep->clk_ipg);
+	ret = clk_prepare_enable(fep->clk_ahb);
+	if (ret)
+		return ret;
+	ret = clk_prepare_enable(fep->clk_ipg);
+	if (ret)
+		goto failed_clk_ipg;
+
+	return 0;
+
+failed_clk_ipg:
+	clk_disable_unprepare(fep->clk_ahb);
+	return ret;
 }
 
 static const struct dev_pm_ops fec_pm_ops = {
-- 
2.20.1

[PATCH 4.14 087/115] mlxsw: spectrum_switchdev: Add MDB entries in prepare phase

[Greg Kroah-Hartman]

[ Upstream commit d4d0e40977ac450f32f2db5e4d8e23c9d2578899 ]

The driver cannot guarantee in the prepare phase that it will be able to
write an MDB entry to the device. In case the driver returned success
during the prepare phase, but then failed to add the entry in the commit
phase, a WARNING [1] will be generated by the switchdev core.

Fix this by doing the work in the prepare phase instead.

[1]
[  358.544486] swp12s0: Commit of object (id=2) failed.
[  358.550061] WARNING: CPU: 0 PID: 30 at net/switchdev/switchdev.c:281 switchdev_port_obj_add_now+0x9b/0xe0
[  358.560754] CPU: 0 PID: 30 Comm: kworker/0:1 Not tainted 5.0.0-custom-13382-gf2449babf221 #1350
[  358.570472] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016
[  358.580582] Workqueue: events switchdev_deferred_process_work
[  358.587001] RIP: 0010:switchdev_port_obj_add_now+0x9b/0xe0
...
[  358.614109] RSP: 0018:ffffa6b900d6fe18 EFLAGS: 00010286
[  358.619943] RAX: 0000000000000000 RBX: ffff8b00797ff000 RCX: 0000000000000000
[  358.627912] RDX: ffff8b00b7a1d4c0 RSI: ffff8b00b7a152e8 RDI: ffff8b00b7a152e8
[  358.635881] RBP: ffff8b005c3f5bc0 R08: 000000000000022b R09: 0000000000000000
[  358.643850] R10: 0000000000000000 R11: ffffa6b900d6fcc8 R12: 0000000000000000
[  358.651819] R13: dead000000000100 R14: ffff8b00b65a23c0 R15: 0ffff8b00b7a2200
[  358.659790] FS:  0000000000000000(0000) GS:ffff8b00b7a00000(0000) knlGS:0000000000000000
[  358.668820] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  358.675228] CR2: 00007f00aad90de0 CR3: 00000001ca80d000 CR4: 00000000001006f0
[  358.683188] Call Trace:
[  358.685918]  switchdev_port_obj_add_deferred+0x13/0x60
[  358.691655]  switchdev_deferred_process+0x6b/0xf0
[  358.696907]  switchdev_deferred_process_work+0xa/0x10
[  358.702548]  process_one_work+0x1f5/0x3f0
[  358.707022]  worker_thread+0x28/0x3c0
[  358.711099]  ? process_one_work+0x3f0/0x3f0
[  358.715768]  kthread+0x10d/0x130
[  358.719369]  ? __kthread_create_on_node+0x180/0x180
[  358.724815]  ret_from_fork+0x35/0x40

Fixes: 3a49b4fde2a1 ("mlxsw: Adding layer 2 multicast support")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Alex Kushnarov <alexanderk@mellanox.com>
Tested-by: Alex Kushnarov <alexanderk@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
index 3ba9f2c079b2a..8a1788108f52a 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
@@ -1320,7 +1320,7 @@ static int mlxsw_sp_port_mdb_add(struct mlxsw_sp_port *mlxsw_sp_port,
 	u16 fid_index;
 	int err = 0;
 
-	if (switchdev_trans_ph_prepare(trans))
+	if (switchdev_trans_ph_commit(trans))
 		return 0;
 
 	bridge_port = mlxsw_sp_bridge_port_find(mlxsw_sp->bridge, orig_dev);
-- 
2.20.1

[PATCH 4.14 088/115] mlxsw: core: Do not use WQ_MEM_RECLAIM for EMAD workqueue

[Greg Kroah-Hartman]

[ Upstream commit a8c133b06183c529c51cd0d54eb57d6b7078370c ]

The EMAD workqueue is used to handle retransmission of EMAD packets that
contain configuration data for the device's firmware.

Given the workers need to allocate these packets and that the code is
not called as part of memory reclaim path, remove the WQ_MEM_RECLAIM
flag.

Fixes: d965465b60ba ("mlxsw: core: Fix possible deadlock")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/mellanox/mlxsw/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/core.c b/drivers/net/ethernet/mellanox/mlxsw/core.c
index cced009da8699..070fd3f7fadf9 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/core.c
@@ -600,7 +600,7 @@ static int mlxsw_emad_init(struct mlxsw_core *mlxsw_core)
 	if (!(mlxsw_core->bus->features & MLXSW_BUS_F_TXRX))
 		return 0;
 
-	emad_wq = alloc_workqueue("mlxsw_core_emad", WQ_MEM_RECLAIM, 0);
+	emad_wq = alloc_workqueue("mlxsw_core_emad", 0, 0);
 	if (!emad_wq)
 		return -ENOMEM;
 	mlxsw_core->emad_wq = emad_wq;
-- 
2.20.1

[PATCH 4.14 089/115] mlxsw: core: Do not use WQ_MEM_RECLAIM for mlxsw ordered workqueue

[Greg Kroah-Hartman]

[ Upstream commit 4af0699782e2cc7d0d89db9eb6f8844dd3df82dc ]

The ordered workqueue is used to offload various objects such as routes
and neighbours in the order they are notified.

It should not be called as part of memory reclaim path, so remove the
WQ_MEM_RECLAIM flag. This can also result in a warning [1], if a worker
tries to flush a non-WQ_MEM_RECLAIM workqueue.

[1]
[97703.542861] workqueue: WQ_MEM_RECLAIM mlxsw_core_ordered:mlxsw_sp_router_fib6_event_work [mlxsw_spectrum] is flushing !WQ_MEM_RECLAIM events:rht_deferred_worker
[97703.542884] WARNING: CPU: 1 PID: 32492 at kernel/workqueue.c:2605 check_flush_dependency+0xb5/0x130
...
[97703.542988] Hardware name: Mellanox Technologies Ltd. MSN3700C/VMOD0008, BIOS 5.11 10/10/2018
[97703.543049] Workqueue: mlxsw_core_ordered mlxsw_sp_router_fib6_event_work [mlxsw_spectrum]
[97703.543061] RIP: 0010:check_flush_dependency+0xb5/0x130
...
[97703.543071] RSP: 0018:ffffb3f08137bc00 EFLAGS: 00010086
[97703.543076] RAX: 0000000000000000 RBX: ffff96e07740ae00 RCX: 0000000000000000
[97703.543080] RDX: 0000000000000094 RSI: ffffffff82dc1934 RDI: 0000000000000046
[97703.543084] RBP: ffffb3f08137bc20 R08: ffffffff82dc18a0 R09: 00000000000225c0
[97703.543087] R10: 0000000000000000 R11: 0000000000007eec R12: ffffffff816e4ee0
[97703.543091] R13: ffff96e06f6a5c00 R14: ffff96e077ba7700 R15: ffffffff812ab0c0
[97703.543097] FS: 0000000000000000(0000) GS:ffff96e077a80000(0000) knlGS:0000000000000000
[97703.543101] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[97703.543104] CR2: 00007f8cd135b280 CR3: 00000001e860e003 CR4: 00000000003606e0
[97703.543109] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[97703.543112] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[97703.543115] Call Trace:
[97703.543129] __flush_work+0xbd/0x1e0
[97703.543137] ? __cancel_work_timer+0x136/0x1b0
[97703.543145] ? pwq_dec_nr_in_flight+0x49/0xa0
[97703.543154] __cancel_work_timer+0x136/0x1b0
[97703.543175] ? mlxsw_reg_trans_bulk_wait+0x145/0x400 [mlxsw_core]
[97703.543184] cancel_work_sync+0x10/0x20
[97703.543191] rhashtable_free_and_destroy+0x23/0x140
[97703.543198] rhashtable_destroy+0xd/0x10
[97703.543254] mlxsw_sp_fib_destroy+0xb1/0xf0 [mlxsw_spectrum]
[97703.543310] mlxsw_sp_vr_put+0xa8/0xc0 [mlxsw_spectrum]
[97703.543364] mlxsw_sp_fib_node_put+0xbf/0x140 [mlxsw_spectrum]
[97703.543418] ? mlxsw_sp_fib6_entry_destroy+0xe8/0x110 [mlxsw_spectrum]
[97703.543475] mlxsw_sp_router_fib6_event_work+0x6cd/0x7f0 [mlxsw_spectrum]
[97703.543484] process_one_work+0x1fd/0x400
[97703.543493] worker_thread+0x34/0x410
[97703.543500] kthread+0x121/0x140
[97703.543507] ? process_one_work+0x400/0x400
[97703.543512] ? kthread_park+0x90/0x90
[97703.543523] ret_from_fork+0x35/0x40

Fixes: a3832b31898f ("mlxsw: core: Create an ordered workqueue for FIB offload")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Semion Lisyansky <semionl@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/mellanox/mlxsw/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/core.c b/drivers/net/ethernet/mellanox/mlxsw/core.c
index 070fd3f7fadf9..33262c09c703c 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/core.c
@@ -1815,7 +1815,7 @@ static int __init mlxsw_core_module_init(void)
 	mlxsw_wq = alloc_workqueue(mlxsw_core_driver_name, WQ_MEM_RECLAIM, 0);
 	if (!mlxsw_wq)
 		return -ENOMEM;
-	mlxsw_owq = alloc_ordered_workqueue("%s_ordered", WQ_MEM_RECLAIM,
+	mlxsw_owq = alloc_ordered_workqueue("%s_ordered", 0,
 					    mlxsw_core_driver_name);
 	if (!mlxsw_owq) {
 		err = -ENOMEM;
-- 
2.20.1

[PATCH 4.14 090/115] mlxsw: core: Do not use WQ_MEM_RECLAIM for mlxsw workqueue

[Greg Kroah-Hartman]

[ Upstream commit b442fed1b724af0de087912a5718ddde1b87acbb ]

The workqueue is used to periodically update the networking stack about
activity / statistics of various objects such as neighbours and TC
actions.

It should not be called as part of memory reclaim path, so remove the
WQ_MEM_RECLAIM flag.

Fixes: 3d5479e92087 ("mlxsw: core: Remove deprecated create_workqueue")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/mellanox/mlxsw/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/core.c b/drivers/net/ethernet/mellanox/mlxsw/core.c
index 33262c09c703c..fad26046e1595 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/core.c
@@ -1812,7 +1812,7 @@ static int __init mlxsw_core_module_init(void)
 {
 	int err;
 
-	mlxsw_wq = alloc_workqueue(mlxsw_core_driver_name, WQ_MEM_RECLAIM, 0);
+	mlxsw_wq = alloc_workqueue(mlxsw_core_driver_name, 0, 0);
 	if (!mlxsw_wq)
 		return -ENOMEM;
 	mlxsw_owq = alloc_ordered_workqueue("%s_ordered", 0,
-- 
2.20.1

[PATCH 4.14 091/115] NFC: nci: Add some bounds checking in nci_hci_cmd_received()

[Greg Kroah-Hartman]

[ Upstream commit d7ee81ad09f072eab1681877fc71ec05f9c1ae92 ]

This is similar to commit 674d9de02aa7 ("NFC: Fix possible memory
corruption when handling SHDLC I-Frame commands").

I'm not totally sure, but I think that commit description may have
overstated the danger.  I was under the impression that this data came
from the firmware?  If you can't trust your networking firmware, then
you're already in trouble.

Anyway, these days we add bounds checking where ever we can and we call
it kernel hardening.  Better safe than sorry.

Fixes: 11f54f228643 ("NFC: nci: Add HCI over NCI protocol support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/nfc/nci/hci.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/net/nfc/nci/hci.c b/net/nfc/nci/hci.c
index ddfc52ac1f9b4..c0d323b58e732 100644
--- a/net/nfc/nci/hci.c
+++ b/net/nfc/nci/hci.c
@@ -312,6 +312,10 @@ static void nci_hci_cmd_received(struct nci_dev *ndev, u8 pipe,
 		create_info = (struct nci_hci_create_pipe_resp *)skb->data;
 		dest_gate = create_info->dest_gate;
 		new_pipe = create_info->pipe;
+		if (new_pipe >= NCI_HCI_MAX_PIPES) {
+			status = NCI_HCI_ANY_E_NOK;
+			goto exit;
+		}
 
 		/* Save the new created pipe and bind with local gate,
 		 * the description for skb->data[3] is destination gate id
@@ -336,6 +340,10 @@ static void nci_hci_cmd_received(struct nci_dev *ndev, u8 pipe,
 			goto exit;
 		}
 		delete_info = (struct nci_hci_delete_pipe_noti *)skb->data;
+		if (delete_info->pipe >= NCI_HCI_MAX_PIPES) {
+			status = NCI_HCI_ANY_E_NOK;
+			goto exit;
+		}
 
 		ndev->hci_dev->pipes[delete_info->pipe].gate =
 						NCI_HCI_INVALID_GATE;
-- 
2.20.1

[PATCH 4.14 092/115] nfc: nci: Potential off by one in ->pipes[] array

[Greg Kroah-Hartman]

[ Upstream commit 6491d698396fd5da4941980a35ca7c162a672016 ]

This is similar to commit e285d5bfb7e9 ("NFC: Fix the number of pipes")
where we changed NFC_HCI_MAX_PIPES from 127 to 128.

As the comment next to the define explains, the pipe identifier is 7
bits long.  The highest possible pipe is 127, but the number of possible
pipes is 128.  As the code is now, then there is potential for an
out of bounds array access:

    net/nfc/nci/hci.c:297 nci_hci_cmd_received() warn: array off by one?
    'ndev->hci_dev->pipes[pipe]' '0-127 == 127'

Fixes: 11f54f228643 ("NFC: nci: Add HCI over NCI protocol support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 include/net/nfc/nci_core.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/net/nfc/nci_core.h b/include/net/nfc/nci_core.h
index 87499b6b35d6d..df5c69db68afc 100644
--- a/include/net/nfc/nci_core.h
+++ b/include/net/nfc/nci_core.h
@@ -166,7 +166,7 @@ struct nci_conn_info {
  * According to specification 102 622 chapter 4.4 Pipes,
  * the pipe identifier is 7 bits long.
  */
-#define NCI_HCI_MAX_PIPES          127
+#define NCI_HCI_MAX_PIPES          128
 
 struct nci_hci_gate {
 	u8 gate;
-- 
2.20.1

[PATCH 4.14 093/115] x86/kprobes: Avoid kretprobe recursion bug

[Greg Kroah-Hartman]

[ Upstream commit b191fa96ea6dc00d331dcc28c1f7db5e075693a0 ]

Avoid kretprobe recursion loop bg by setting a dummy
kprobes to current_kprobe per-CPU variable.

This bug has been introduced with the asm-coded trampoline
code, since previously it used another kprobe for hooking
the function return placeholder (which only has a nop) and
trampoline handler was called from that kprobe.

This revives the old lost kprobe again.

With this fix, we don't see deadlock anymore.

And you can see that all inner-called kretprobe are skipped.

  event_1                                  235               0
  event_2                                19375           19612

The 1st column is recorded count and the 2nd is missed count.
Above shows (event_1 rec) + (event_2 rec) ~= (event_2 missed)
(some difference are here because the counter is racy)

Reported-by: Andrea Righi <righi.andrea@gmail.com>
Tested-by: Andrea Righi <righi.andrea@gmail.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: c9becf58d935 ("[PATCH] kretprobe: kretprobe-booster")
Link: http://lkml.kernel.org/r/155094064889.6137.972160690963039.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/x86/kernel/kprobes/core.c | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c
index 56cf6c2632549..9d7bb8de2917e 100644
--- a/arch/x86/kernel/kprobes/core.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -744,11 +744,16 @@ asm(
 NOKPROBE_SYMBOL(kretprobe_trampoline);
 STACK_FRAME_NON_STANDARD(kretprobe_trampoline);
 
+static struct kprobe kretprobe_kprobe = {
+	.addr = (void *)kretprobe_trampoline,
+};
+
 /*
  * Called from kretprobe_trampoline
  */
 __visible __used void *trampoline_handler(struct pt_regs *regs)
 {
+	struct kprobe_ctlblk *kcb;
 	struct kretprobe_instance *ri = NULL;
 	struct hlist_head *head, empty_rp;
 	struct hlist_node *tmp;
@@ -758,6 +763,17 @@ __visible __used void *trampoline_handler(struct pt_regs *regs)
 	void *frame_pointer;
 	bool skipped = false;
 
+	preempt_disable();
+
+	/*
+	 * Set a dummy kprobe for avoiding kretprobe recursion.
+	 * Since kretprobe never run in kprobe handler, kprobe must not
+	 * be running at this point.
+	 */
+	kcb = get_kprobe_ctlblk();
+	__this_cpu_write(current_kprobe, &kretprobe_kprobe);
+	kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+
 	INIT_HLIST_HEAD(&empty_rp);
 	kretprobe_hash_lock(current, &head, &flags);
 	/* fixup registers */
@@ -833,10 +849,9 @@ __visible __used void *trampoline_handler(struct pt_regs *regs)
 		orig_ret_address = (unsigned long)ri->ret_addr;
 		if (ri->rp && ri->rp->handler) {
 			__this_cpu_write(current_kprobe, &ri->rp->kp);
-			get_kprobe_ctlblk()->kprobe_status = KPROBE_HIT_ACTIVE;
 			ri->ret_addr = correct_ret_addr;
 			ri->rp->handler(ri, regs);
-			__this_cpu_write(current_kprobe, NULL);
+			__this_cpu_write(current_kprobe, &kretprobe_kprobe);
 		}
 
 		recycle_rp_inst(ri, &empty_rp);
@@ -852,6 +867,9 @@ __visible __used void *trampoline_handler(struct pt_regs *regs)
 
 	kretprobe_hash_unlock(current, &flags);
 
+	__this_cpu_write(current_kprobe, NULL);
+	preempt_enable();
+
 	hlist_for_each_entry_safe(ri, tmp, &empty_rp, hlist) {
 		hlist_del(&ri->hlist);
 		kfree(ri);
-- 
2.20.1

[PATCH 4.14 094/115] cw1200: fix missing unlock on error in cw1200_hw_scan()

[Greg Kroah-Hartman]

From: Wei Yongjun <weiyongjun1@huawei.com>

commit 51c8d24101c79ffce3e79137e2cee5dfeb956dd7 upstream.

Add the missing unlock before return from function cw1200_hw_scan()
in the error handling case.

Fixes: 4f68ef64cd7f ("cw1200: Fix concurrency use-after-free bugs in cw1200_hw_scan()")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/st/cw1200/scan.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/net/wireless/st/cw1200/scan.c
+++ b/drivers/net/wireless/st/cw1200/scan.c
@@ -84,8 +84,11 @@ int cw1200_hw_scan(struct ieee80211_hw *
 
 	frame.skb = ieee80211_probereq_get(hw, priv->vif->addr, NULL, 0,
 		req->ie_len);
-	if (!frame.skb)
+	if (!frame.skb) {
+		mutex_unlock(&priv->conf_mutex);
+		up(&priv->scan.lock);
 		return -ENOMEM;
+	}
 
 	if (req->ie_len)
 		skb_put_data(frame.skb, req->ie, req->ie_len);

[PATCH 4.14 095/115] mwl8k: Fix rate_idx underflow

[Greg Kroah-Hartman]

From: Petr Štetiar <ynezz@true.cz>

commit 6b583201fa219b7b1b6aebd8966c8fd9357ef9f4 upstream.

It was reported on OpenWrt bug tracking system[1], that several users
are affected by the endless reboot of their routers if they configure
5GHz interface with channel 44 or 48.

The reboot loop is caused by the following excessive number of WARN_ON
messages:

 WARNING: CPU: 0 PID: 0 at backports-4.19.23-1/net/mac80211/rx.c:4516
                             ieee80211_rx_napi+0x1fc/0xa54 [mac80211]

as the messages are being correctly emitted by the following guard:

 case RX_ENC_LEGACY:
      if (WARN_ON(status->rate_idx >= sband->n_bitrates))

as the rate_idx is in this case erroneously set to 251 (0xfb). This fix
simply converts previously used magic number to proper constant and
guards against substraction which is leading to the currently observed
underflow.

1. https://bugs.openwrt.org/index.php?do=details&task_id=2218

Fixes: 854783444bab ("mwl8k: properly set receive status rate index on 5 GHz receive")
Cc: <stable@vger.kernel.org>
Tested-by: Eubert Bao <bunnier@gmail.com>
Reported-by: Eubert Bao <bunnier@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/marvell/mwl8k.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

--- a/drivers/net/wireless/marvell/mwl8k.c
+++ b/drivers/net/wireless/marvell/mwl8k.c
@@ -436,6 +436,9 @@ static const struct ieee80211_rate mwl8k
 #define MWL8K_CMD_UPDATE_STADB		0x1123
 #define MWL8K_CMD_BASTREAM		0x1125
 
+#define MWL8K_LEGACY_5G_RATE_OFFSET \
+	(ARRAY_SIZE(mwl8k_rates_24) - ARRAY_SIZE(mwl8k_rates_50))
+
 static const char *mwl8k_cmd_name(__le16 cmd, char *buf, int bufsize)
 {
 	u16 command = le16_to_cpu(cmd);
@@ -1011,8 +1014,9 @@ mwl8k_rxd_ap_process(void *_rxd, struct
 
 	if (rxd->channel > 14) {
 		status->band = NL80211_BAND_5GHZ;
-		if (!(status->encoding == RX_ENC_HT))
-			status->rate_idx -= 5;
+		if (!(status->encoding == RX_ENC_HT) &&
+		    status->rate_idx >= MWL8K_LEGACY_5G_RATE_OFFSET)
+			status->rate_idx -= MWL8K_LEGACY_5G_RATE_OFFSET;
 	} else {
 		status->band = NL80211_BAND_2GHZ;
 	}
@@ -1119,8 +1123,9 @@ mwl8k_rxd_sta_process(void *_rxd, struct
 
 	if (rxd->channel > 14) {
 		status->band = NL80211_BAND_5GHZ;
-		if (!(status->encoding == RX_ENC_HT))
-			status->rate_idx -= 5;
+		if (!(status->encoding == RX_ENC_HT) &&
+		    status->rate_idx >= MWL8K_LEGACY_5G_RATE_OFFSET)
+			status->rate_idx -= MWL8K_LEGACY_5G_RATE_OFFSET;
 	} else {
 		status->band = NL80211_BAND_2GHZ;
 	}

[PATCH 4.14 096/115] rtlwifi: rtl8723ae: Fix missing break in switch statement

[Greg Kroah-Hartman]

From: Gustavo A. R. Silva <gustavo@embeddedor.com>

commit 84242b82d81c54e009a2aaa74d3d9eff70babf56 upstream.

Add missing break statement in order to prevent the code from falling
through to case 0x1025, and erroneously setting rtlhal->oem_id to
RT_CID_819X_ACER when rtlefuse->eeprom_svid is equal to 0x10EC and
none of the cases in switch (rtlefuse->eeprom_smid) match.

This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.

Fixes: 238ad2ddf34b ("rtlwifi: rtl8723ae: Clean up the hardware info routine")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c
@@ -1699,6 +1699,7 @@ static void _rtl8723e_read_adapter_info(
 					rtlhal->oem_id = RT_CID_819X_LENOVO;
 					break;
 				}
+				break;
 			case 0x1025:
 				rtlhal->oem_id = RT_CID_819X_ACER;
 				break;

[PATCH 4.14 097/115] Dont jump to compute_result state from check_result state

[Greg Kroah-Hartman]

From: Nigel Croxon <ncroxon@redhat.com>

commit 4f4fd7c5798bbdd5a03a60f6269cf1177fbd11ef upstream.

Changing state from check_state_check_result to
check_state_compute_result not only is unsafe but also doesn't
appear to serve a valid purpose.  A raid6 check should only be
pushing out extra writes if doing repair and a mis-match occurs.
The stripe dev management will already try and do repair writes
for failing sectors.

This patch makes the raid6 check_state_check_result handling
work more like raid5's.  If somehow too many failures for a
check, just quit the check operation for the stripe.  When any
checks pass, don't try and use check_state_compute_result for
a purpose it isn't needed for and is unsafe for.  Just mark the
stripe as in sync for passing its parity checks and let the
stripe dev read/write code and the bad blocks list do their
job handling I/O errors.

Repro steps from Xiao:

These are the steps to reproduce this problem:
1. redefined OPT_MEDIUM_ERR_ADDR to 12000 in scsi_debug.c
2. insmod scsi_debug.ko dev_size_mb=11000  max_luns=1 num_tgts=1
3. mdadm --create /dev/md127 --level=6 --raid-devices=5 /dev/sde1 /dev/sde2 /dev/sde3 /dev/sde5 /dev/sde6
sde is the disk created by scsi_debug
4. echo "2" >/sys/module/scsi_debug/parameters/opts
5. raid-check

It panic:
[ 4854.730899] md: data-check of RAID array md127
[ 4854.857455] sd 5:0:0:0: [sdr] tag#80 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4854.859246] sd 5:0:0:0: [sdr] tag#80 Sense Key : Medium Error [current]
[ 4854.860694] sd 5:0:0:0: [sdr] tag#80 Add. Sense: Unrecovered read error
[ 4854.862207] sd 5:0:0:0: [sdr] tag#80 CDB: Read(10) 28 00 00 00 2d 88 00 04 00 00
[ 4854.864196] print_req_error: critical medium error, dev sdr, sector 11656 flags 0
[ 4854.867409] sd 5:0:0:0: [sdr] tag#100 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4854.869469] sd 5:0:0:0: [sdr] tag#100 Sense Key : Medium Error [current]
[ 4854.871206] sd 5:0:0:0: [sdr] tag#100 Add. Sense: Unrecovered read error
[ 4854.872858] sd 5:0:0:0: [sdr] tag#100 CDB: Read(10) 28 00 00 00 2e e0 00 00 08 00
[ 4854.874587] print_req_error: critical medium error, dev sdr, sector 12000 flags 4000
[ 4854.876456] sd 5:0:0:0: [sdr] tag#101 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4854.878552] sd 5:0:0:0: [sdr] tag#101 Sense Key : Medium Error [current]
[ 4854.880278] sd 5:0:0:0: [sdr] tag#101 Add. Sense: Unrecovered read error
[ 4854.881846] sd 5:0:0:0: [sdr] tag#101 CDB: Read(10) 28 00 00 00 2e e8 00 00 08 00
[ 4854.883691] print_req_error: critical medium error, dev sdr, sector 12008 flags 4000
[ 4854.893927] sd 5:0:0:0: [sdr] tag#166 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4854.896002] sd 5:0:0:0: [sdr] tag#166 Sense Key : Medium Error [current]
[ 4854.897561] sd 5:0:0:0: [sdr] tag#166 Add. Sense: Unrecovered read error
[ 4854.899110] sd 5:0:0:0: [sdr] tag#166 CDB: Read(10) 28 00 00 00 2e e0 00 00 10 00
[ 4854.900989] print_req_error: critical medium error, dev sdr, sector 12000 flags 0
[ 4854.902757] md/raid:md127: read error NOT corrected!! (sector 9952 on sdr1).
[ 4854.904375] md/raid:md127: read error NOT corrected!! (sector 9960 on sdr1).
[ 4854.906201] ------------[ cut here ]------------
[ 4854.907341] kernel BUG at drivers/md/raid5.c:4190!

raid5.c:4190 above is this BUG_ON:

    handle_parity_checks6()
        ...
        BUG_ON(s->uptodate < disks - 1); /* We don't need Q to recover */

Cc: <stable@vger.kernel.org> # v3.16+
OriginalAuthor: David Jeffery <djeffery@redhat.com>
Cc: Xiao Ni <xni@redhat.com>
Tested-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: David Jeffy <djeffery@redhat.com>
Signed-off-by: Nigel Croxon <ncroxon@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/raid5.c |   19 ++++---------------
 1 file changed, 4 insertions(+), 15 deletions(-)

--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -4218,26 +4218,15 @@ static void handle_parity_checks6(struct
 	case check_state_check_result:
 		sh->check_state = check_state_idle;
 
+		if (s->failed > 1)
+			break;
 		/* handle a successful check operation, if parity is correct
 		 * we are done.  Otherwise update the mismatch count and repair
 		 * parity if !MD_RECOVERY_CHECK
 		 */
 		if (sh->ops.zero_sum_result == 0) {
-			/* both parities are correct */
-			if (!s->failed)
-				set_bit(STRIPE_INSYNC, &sh->state);
-			else {
-				/* in contrast to the raid5 case we can validate
-				 * parity, but still have a failure to write
-				 * back
-				 */
-				sh->check_state = check_state_compute_result;
-				/* Returning at this point means that we may go
-				 * off and bring p and/or q uptodate again so
-				 * we make sure to check zero_sum_result again
-				 * to verify if p or q need writeback
-				 */
-			}
+			/* Any parity checked was correct */
+			set_bit(STRIPE_INSYNC, &sh->state);
 		} else {
 			atomic64_add(STRIPE_SECTORS, &conf->mddev->resync_mismatches);
 			if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery)) {

[PATCH 4.14 098/115] powerpc/64s: Include cpu header

[Greg Kroah-Hartman]

From: Breno Leitao <leitao@debian.org>

commit 42e2acde1237878462b028f5a27d9cc5bea7502c upstream.

Current powerpc security.c file is defining functions, as
cpu_show_meltdown(), cpu_show_spectre_v{1,2} and others, that are being
declared at linux/cpu.h header without including the header file that
contains these declarations.

This is being reported by sparse, which thinks that these functions are
static, due to the lack of declaration:

	arch/powerpc/kernel/security.c:105:9: warning: symbol 'cpu_show_meltdown' was not declared. Should it be static?
	arch/powerpc/kernel/security.c:139:9: warning: symbol 'cpu_show_spectre_v1' was not declared. Should it be static?
	arch/powerpc/kernel/security.c:161:9: warning: symbol 'cpu_show_spectre_v2' was not declared. Should it be static?
	arch/powerpc/kernel/security.c:209:6: warning: symbol 'stf_barrier' was not declared. Should it be static?
	arch/powerpc/kernel/security.c:289:9: warning: symbol 'cpu_show_spec_store_bypass' was not declared. Should it be static?

This patch simply includes the proper header (linux/cpu.h) to match
function definition and declaration.

Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Major Hayden <major@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/security.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/powerpc/kernel/security.c
+++ b/arch/powerpc/kernel/security.c
@@ -4,6 +4,7 @@
 //
 // Copyright 2018, Michael Ellerman, IBM Corporation.
 
+#include <linux/cpu.h>
 #include <linux/kernel.h>
 #include <linux/device.h>
 #include <linux/seq_buf.h>

[PATCH 4.14 099/115] bonding: fix arp_validate toggling in active-backup mode

[Greg Kroah-Hartman]

From: Jarod Wilson <jarod@redhat.com>

[ Upstream commit a9b8a2b39ce65df45687cf9ef648885c2a99fe75 ]

There's currently a problem with toggling arp_validate on and off with an
active-backup bond. At the moment, you can start up a bond, like so:

modprobe bonding mode=1 arp_interval=100 arp_validate=0 arp_ip_targets=192.168.1.1
ip link set bond0 down
echo "ens4f0" > /sys/class/net/bond0/bonding/slaves
echo "ens4f1" > /sys/class/net/bond0/bonding/slaves
ip link set bond0 up
ip addr add 192.168.1.2/24 dev bond0

Pings to 192.168.1.1 work just fine. Now turn on arp_validate:

echo 1 > /sys/class/net/bond0/bonding/arp_validate

Pings to 192.168.1.1 continue to work just fine. Now when you go to turn
arp_validate off again, the link falls flat on it's face:

echo 0 > /sys/class/net/bond0/bonding/arp_validate
dmesg
...
[133191.911987] bond0: Setting arp_validate to none (0)
[133194.257793] bond0: bond_should_notify_peers: slave ens4f0
[133194.258031] bond0: link status definitely down for interface ens4f0, disabling it
[133194.259000] bond0: making interface ens4f1 the new active one
[133197.330130] bond0: link status definitely down for interface ens4f1, disabling it
[133197.331191] bond0: now running without any active interface!

The problem lies in bond_options.c, where passing in arp_validate=0
results in bond->recv_probe getting set to NULL. This flies directly in
the face of commit 3fe68df97c7f, which says we need to set recv_probe =
bond_arp_recv, even if we're not using arp_validate. Said commit fixed
this in bond_option_arp_interval_set, but missed that we can get to that
same state in bond_option_arp_validate_set as well.

One solution would be to universally set recv_probe = bond_arp_recv here
as well, but I don't think bond_option_arp_validate_set has any business
touching recv_probe at all, and that should be left to the arp_interval
code, so we can just make things much tidier here.

Fixes: 3fe68df97c7f ("bonding: always set recv_probe to bond_arp_rcv in arp monitor")
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/bonding/bond_options.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c
index 4d5d01cb8141..80867bd8f44c 100644
--- a/drivers/net/bonding/bond_options.c
+++ b/drivers/net/bonding/bond_options.c
@@ -1098,13 +1098,6 @@ static int bond_option_arp_validate_set(struct bonding *bond,
 {
 	netdev_dbg(bond->dev, "Setting arp_validate to %s (%llu)\n",
 		   newval->string, newval->value);
-
-	if (bond->dev->flags & IFF_UP) {
-		if (!newval->value)
-			bond->recv_probe = NULL;
-		else if (bond->params.arp_interval)
-			bond->recv_probe = bond_arp_rcv;
-	}
 	bond->params.arp_validate = newval->value;
 
 	return 0;
-- 
2.20.1

[PATCH 4.14 100/115] bridge: Fix error path for kobject_init_and_add()

[Greg Kroah-Hartman]

From: "Tobin C. Harding" <tobin@kernel.org>

[ Upstream commit bdfad5aec1392b93495b77b864d58d7f101dc1c1 ]

Currently error return from kobject_init_and_add() is not followed by a
call to kobject_put().  This means there is a memory leak.  We currently
set p to NULL so that kfree() may be called on it as a noop, the code is
arguably clearer if we move the kfree() up closer to where it is
called (instead of after goto jump).

Remove a goto label 'err1' and jump to call to kobject_put() in error
return from kobject_init_and_add() fixing the memory leak.  Re-name goto
label 'put_back' to 'err1' now that we don't use err1, following current
nomenclature (err1, err2 ...).  Move call to kfree out of the error
code at bottom of function up to closer to where memory was allocated.
Add comment to clarify call to kfree().

Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bridge/br_if.c |   13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -518,13 +518,15 @@ int br_add_if(struct net_bridge *br, str
 	call_netdevice_notifiers(NETDEV_JOIN, dev);
 
 	err = dev_set_allmulti(dev, 1);
-	if (err)
-		goto put_back;
+	if (err) {
+		kfree(p);	/* kobject not yet init'd, manually free */
+		goto err1;
+	}
 
 	err = kobject_init_and_add(&p->kobj, &brport_ktype, &(dev->dev.kobj),
 				   SYSFS_BRIDGE_PORT_ATTR);
 	if (err)
-		goto err1;
+		goto err2;
 
 	err = br_sysfs_addif(p);
 	if (err)
@@ -607,12 +609,9 @@ err3:
 	sysfs_remove_link(br->ifobj, p->dev->name);
 err2:
 	kobject_put(&p->kobj);
-	p = NULL; /* kobject_put frees */
-err1:
 	dev_set_allmulti(dev, -1);
-put_back:
+err1:
 	dev_put(dev);
-	kfree(p);
 	return err;
 }
 

[PATCH 4.14 101/115] dpaa_eth: fix SG frame cleanup

[Greg Kroah-Hartman]

From: Laurentiu Tudor <laurentiu.tudor@nxp.com>

[ Upstream commit 17170e6570c082717c142733d9a638bcd20551f8 ]

Fix issue with the entry indexing in the sg frame cleanup code being
off-by-1. This problem showed up when doing some basic iperf tests and
manifested in traffic coming to a halt.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -1639,7 +1639,7 @@ static struct sk_buff *dpaa_cleanup_tx_f
 				 qm_sg_entry_get_len(&sgt[0]), dma_dir);
 
 		/* remaining pages were mapped with skb_frag_dma_map() */
-		for (i = 1; i < nr_frags; i++) {
+		for (i = 1; i <= nr_frags; i++) {
 			WARN_ON(qm_sg_entry_is_ext(&sgt[i]));
 
 			dma_unmap_page(dev, qm_sg_addr(&sgt[i]),

[PATCH 4.14 102/115] fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied

[Greg Kroah-Hartman]

From: Hangbin Liu <liuhangbin@gmail.com>

[ Upstream commit e9919a24d3022f72bcadc407e73a6ef17093a849 ]

With commit 153380ec4b9 ("fib_rules: Added NLM_F_EXCL support to
fib_nl_newrule") we now able to check if a rule already exists. But this
only works with iproute2. For other tools like libnl, NetworkManager,
it still could add duplicate rules with only NLM_F_CREATE flag, like

[localhost ~ ]# ip rule
0:      from all lookup local
32766:  from all lookup main
32767:  from all lookup default
100000: from 192.168.7.5 lookup 5
100000: from 192.168.7.5 lookup 5

As it doesn't make sense to create two duplicate rules, let's just return
0 if the rule exists.

Fixes: 153380ec4b9 ("fib_rules: Added NLM_F_EXCL support to fib_nl_newrule")
Reported-by: Thomas Haller <thaller@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/fib_rules.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/net/core/fib_rules.c
+++ b/net/core/fib_rules.c
@@ -563,9 +563,9 @@ int fib_nl_newrule(struct sk_buff *skb,
 		rule->uid_range = fib_kuid_range_unset;
 	}
 
-	if ((nlh->nlmsg_flags & NLM_F_EXCL) &&
-	    rule_exists(ops, frh, tb, rule)) {
-		err = -EEXIST;
+	if (rule_exists(ops, frh, tb, rule)) {
+		if (nlh->nlmsg_flags & NLM_F_EXCL)
+			err = -EEXIST;
 		goto errout_free;
 	}
 

[PATCH 4.14 103/115] ipv4: Fix raw socket lookup for local traffic

[Greg Kroah-Hartman]

From: David Ahern <dsahern@gmail.com>

[ Upstream commit 19e4e768064a87b073a4b4c138b55db70e0cfb9f ]

inet_iif should be used for the raw socket lookup. inet_iif considers
rt_iif which handles the case of local traffic.

As it stands, ping to a local address with the '-I <dev>' option fails
ever since ping was changed to use SO_BINDTODEVICE instead of
cmsg + IP_PKTINFO.

IPv6 works fine.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/raw.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/net/ipv4/raw.c
+++ b/net/ipv4/raw.c
@@ -174,6 +174,7 @@ static int icmp_filter(const struct sock
 static int raw_v4_input(struct sk_buff *skb, const struct iphdr *iph, int hash)
 {
 	int sdif = inet_sdif(skb);
+	int dif = inet_iif(skb);
 	struct sock *sk;
 	struct hlist_head *head;
 	int delivered = 0;
@@ -186,8 +187,7 @@ static int raw_v4_input(struct sk_buff *
 
 	net = dev_net(skb->dev);
 	sk = __raw_v4_lookup(net, __sk_head(head), iph->protocol,
-			     iph->saddr, iph->daddr,
-			     skb->dev->ifindex, sdif);
+			     iph->saddr, iph->daddr, dif, sdif);
 
 	while (sk) {
 		delivered = 1;

[PATCH 4.14 104/115] net: dsa: Fix error cleanup path in dsa_init_module

[Greg Kroah-Hartman]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 68be930249d051fd54d3d99156b3dcadcb2a1f9b ]

BUG: unable to handle kernel paging request at ffffffffa01c5430
PGD 3270067 P4D 3270067 PUD 3271063 PMD 230bc5067 PTE 0
Oops: 0000 [#1
CPU: 0 PID: 6159 Comm: modprobe Not tainted 5.1.0+ #33
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:raw_notifier_chain_register+0x16/0x40
Code: 63 f8 66 90 e9 5d ff ff ff 90 90 90 90 90 90 90 90 90 90 90 55 48 8b 07 48 89 e5 48 85 c0 74 1c 8b 56 10 3b 50 10 7e 07 eb 12 <39> 50 10 7c 0d 48 8d 78 08 48 8b 40 08 48 85 c0 75 ee 48 89 46 08
RSP: 0018:ffffc90001c33c08 EFLAGS: 00010282
RAX: ffffffffa01c5420 RBX: ffffffffa01db420 RCX: 4fcef45928070a8b
RDX: 0000000000000000 RSI: ffffffffa01db420 RDI: ffffffffa01b0068
RBP: ffffc90001c33c08 R08: 000000003e0a33d0 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000094443661 R12: ffff88822c320700
R13: ffff88823109be80 R14: 0000000000000000 R15: ffffc90001c33e78
FS:  00007fab8bd08540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa01c5430 CR3: 00000002297ea000 CR4: 00000000000006f0
Call Trace:
 register_netdevice_notifier+0x43/0x250
 ? 0xffffffffa01e0000
 dsa_slave_register_notifier+0x13/0x70 [dsa_core
 ? 0xffffffffa01e0000
 dsa_init_module+0x2e/0x1000 [dsa_core
 do_one_initcall+0x6c/0x3cc
 ? do_init_module+0x22/0x1f1
 ? rcu_read_lock_sched_held+0x97/0xb0
 ? kmem_cache_alloc_trace+0x325/0x3b0
 do_init_module+0x5b/0x1f1
 load_module+0x1db1/0x2690
 ? m_show+0x1d0/0x1d0
 __do_sys_finit_module+0xc5/0xd0
 __x64_sys_finit_module+0x15/0x20
 do_syscall_64+0x6b/0x1d0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Cleanup allocated resourses if there are errors,
otherwise it will trgger memleak.

Fixes: c9eb3e0f8701 ("net: dsa: Add support for learning FDB through notification")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/dsa/dsa.c |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -300,15 +300,22 @@ static int __init dsa_init_module(void)
 
 	rc = dsa_slave_register_notifier();
 	if (rc)
-		return rc;
+		goto register_notifier_fail;
 
 	rc = dsa_legacy_register();
 	if (rc)
-		return rc;
+		goto legacy_register_fail;
 
 	dev_add_pack(&dsa_pack_type);
 
 	return 0;
+
+legacy_register_fail:
+	dsa_slave_unregister_notifier();
+register_notifier_fail:
+	destroy_workqueue(dsa_owq);
+
+	return rc;
 }
 module_init(dsa_init_module);
 

[PATCH 4.14 105/115] net: ethernet: stmmac: dwmac-sun8i: enable support of unicast filtering

[Greg Kroah-Hartman]

From: Corentin Labbe <clabbe@baylibre.com>

[ Upstream commit d4c26eb6e721683a0f93e346ce55bc8dc3cbb175 ]

When adding more MAC addresses to a dwmac-sun8i interface, the device goes
directly in promiscuous mode.
This is due to IFF_UNICAST_FLT missing flag.

So since the hardware support unicast filtering, let's add IFF_UNICAST_FLT.

Fixes: 9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -858,6 +858,8 @@ static struct mac_device_info *sun8i_dwm
 	mac->mac = &sun8i_dwmac_ops;
 	mac->dma = &sun8i_dwmac_dma_ops;
 
+	priv->dev->priv_flags |= IFF_UNICAST_FLT;
+
 	/* The loopback bit seems to be re-set when link change
 	 * Simply mask it each time
 	 * Speed 10/100/1000 are set in BIT(2)/BIT(3)

[PATCH 4.14 106/115] net: seeq: fix crash caused by not set dev.parent

[Greg Kroah-Hartman]

From: Thomas Bogendoerfer <tbogendoerfer@suse.de>

[ Upstream commit 5afcd14cfc7fed1bcc8abcee2cef82732772bfc2 ]

The old MIPS implementation of dma_cache_sync() didn't use the dev argument,
but commit c9eb6172c328 ("dma-mapping: turn dma_cache_sync into a
dma_map_ops method") changed that, so we now need to set dev.parent.

Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/seeq/sgiseeq.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/ethernet/seeq/sgiseeq.c
+++ b/drivers/net/ethernet/seeq/sgiseeq.c
@@ -734,6 +734,7 @@ static int sgiseeq_probe(struct platform
 	}
 
 	platform_set_drvdata(pdev, dev);
+	SET_NETDEV_DEV(dev, &pdev->dev);
 	sp = netdev_priv(dev);
 
 	/* Make private data page aligned */

[PATCH 4.14 107/115] net: ucc_geth - fix Oops when changing number of buffers in the ring

[Greg Kroah-Hartman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit ee0df19305d9fabd9479b785918966f6e25b733b ]

When changing the number of buffers in the RX ring while the interface
is running, the following Oops is encountered due to the new number
of buffers being taken into account immediately while their allocation
is done when opening the device only.

[   69.882706] Unable to handle kernel paging request for data at address 0xf0000100
[   69.890172] Faulting instruction address: 0xc033e164
[   69.895122] Oops: Kernel access of bad area, sig: 11 [#1]
[   69.900494] BE PREEMPT CMPCPRO
[   69.907120] CPU: 0 PID: 0 Comm: swapper Not tainted 4.14.115-00006-g179ade8ce3-dirty #269
[   69.915956] task: c0684310 task.stack: c06da000
[   69.920470] NIP:  c033e164 LR: c02e44d0 CTR: c02e41fc
[   69.925504] REGS: dfff1e20 TRAP: 0300   Not tainted  (4.14.115-00006-g179ade8ce3-dirty)
[   69.934161] MSR:  00009032 <EE,ME,IR,DR,RI>  CR: 22004428  XER: 20000000
[   69.940869] DAR: f0000100 DSISR: 20000000
[   69.940869] GPR00: c0352d70 dfff1ed0 c0684310 f00000a4 00000040 dfff1f68 00000000 0000001f
[   69.940869] GPR08: df53f410 1cc00040 00000021 c0781640 42004424 100c82b6 f00000a4 df53f5b0
[   69.940869] GPR16: df53f6c0 c05daf84 00000040 00000000 00000040 c0782be4 00000000 00000001
[   69.940869] GPR24: 00000000 df53f400 000001b0 df53f410 df53f000 0000003f df708220 1cc00044
[   69.978348] NIP [c033e164] skb_put+0x0/0x5c
[   69.982528] LR [c02e44d0] ucc_geth_poll+0x2d4/0x3f8
[   69.987384] Call Trace:
[   69.989830] [dfff1ed0] [c02e4554] ucc_geth_poll+0x358/0x3f8 (unreliable)
[   69.996522] [dfff1f20] [c0352d70] net_rx_action+0x248/0x30c
[   70.002099] [dfff1f80] [c04e93e4] __do_softirq+0xfc/0x310
[   70.007492] [dfff1fe0] [c0021124] irq_exit+0xd0/0xd4
[   70.012458] [dfff1ff0] [c000e7e0] call_do_irq+0x24/0x3c
[   70.017683] [c06dbe80] [c0006bac] do_IRQ+0x64/0xc4
[   70.022474] [c06dbea0] [c001097c] ret_from_except+0x0/0x14
[   70.027964] --- interrupt: 501 at rcu_idle_exit+0x84/0x90
[   70.027964]     LR = rcu_idle_exit+0x74/0x90
[   70.037585] [c06dbf60] [20000000] 0x20000000 (unreliable)
[   70.042984] [c06dbf80] [c004bb0c] do_idle+0xb4/0x11c
[   70.047945] [c06dbfa0] [c004bd14] cpu_startup_entry+0x18/0x1c
[   70.053682] [c06dbfb0] [c05fb034] start_kernel+0x370/0x384
[   70.059153] [c06dbff0] [00003438] 0x3438
[   70.063062] Instruction dump:
[   70.066023] 38a00000 38800000 90010014 4bfff015 80010014 7c0803a6 3123ffff 7c691910
[   70.073767] 38210010 4e800020 38600000 4e800020 <80e3005c> 80c30098 3107ffff 7d083910
[   70.081690] ---[ end trace be7ccd9c1e1a9f12 ]---

This patch forbids the modification of the number of buffers in the
ring while the interface is running.

Fixes: ac421852b3a0 ("ucc_geth: add ethtool support")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/freescale/ucc_geth_ethtool.c |    8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

--- a/drivers/net/ethernet/freescale/ucc_geth_ethtool.c
+++ b/drivers/net/ethernet/freescale/ucc_geth_ethtool.c
@@ -252,14 +252,12 @@ uec_set_ringparam(struct net_device *net
 		return -EINVAL;
 	}
 
+	if (netif_running(netdev))
+		return -EBUSY;
+
 	ug_info->bdRingLenRx[queue] = ring->rx_pending;
 	ug_info->bdRingLenTx[queue] = ring->tx_pending;
 
-	if (netif_running(netdev)) {
-		/* FIXME: restart automatically */
-		netdev_info(netdev, "Please re-open the interface\n");
-	}
-
 	return ret;
 }
 

[PATCH 4.14 108/115] packet: Fix error path in packet_init

[Greg Kroah-Hartman]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 36096f2f4fa05f7678bc87397665491700bae757 ]

kernel BUG at lib/list_debug.c:47!
invalid opcode: 0000 [#1
CPU: 0 PID: 12914 Comm: rmmod Tainted: G        W         5.1.0+ #47
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:__list_del_entry_valid+0x53/0x90
Code: 48 8b 32 48 39 fe 75 35 48 8b 50 08 48 39 f2 75 40 b8 01 00 00 00 5d c3 48
89 fe 48 89 c2 48 c7 c7 18 75 fe 82 e8 cb 34 78 ff <0f> 0b 48 89 fe 48 c7 c7 50 75 fe 82 e8 ba 34 78 ff 0f 0b 48 89 f2
RSP: 0018:ffffc90001c2fe40 EFLAGS: 00010286
RAX: 000000000000004e RBX: ffffffffa0184000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff888237a17788 RDI: 00000000ffffffff
RBP: ffffc90001c2fe40 R08: 0000000000000000 R09: 0000000000000000
R10: ffffc90001c2fe10 R11: 0000000000000000 R12: 0000000000000000
R13: ffffc90001c2fe50 R14: ffffffffa0184000 R15: 0000000000000000
FS:  00007f3d83634540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000555c350ea818 CR3: 0000000231677000 CR4: 00000000000006f0
Call Trace:
 unregister_pernet_operations+0x34/0x120
 unregister_pernet_subsys+0x1c/0x30
 packet_exit+0x1c/0x369 [af_packet
 __x64_sys_delete_module+0x156/0x260
 ? lockdep_hardirqs_on+0x133/0x1b0
 ? do_syscall_64+0x12/0x1f0
 do_syscall_64+0x6e/0x1f0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

When modprobe af_packet, register_pernet_subsys
fails and does a cleanup, ops->list is set to LIST_POISON1,
but the module init is considered to success, then while rmmod it,
BUG() is triggered in __list_del_entry_valid which is called from
unregister_pernet_subsys. This patch fix error handing path in
packet_init to avoid possilbe issue if some error occur.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/packet/af_packet.c |   25 ++++++++++++++++++++-----
 1 file changed, 20 insertions(+), 5 deletions(-)

--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -4629,14 +4629,29 @@ static void __exit packet_exit(void)
 
 static int __init packet_init(void)
 {
-	int rc = proto_register(&packet_proto, 0);
+	int rc;
 
-	if (rc != 0)
+	rc = proto_register(&packet_proto, 0);
+	if (rc)
 		goto out;
+	rc = sock_register(&packet_family_ops);
+	if (rc)
+		goto out_proto;
+	rc = register_pernet_subsys(&packet_net_ops);
+	if (rc)
+		goto out_sock;
+	rc = register_netdevice_notifier(&packet_netdev_notifier);
+	if (rc)
+		goto out_pernet;
 
-	sock_register(&packet_family_ops);
-	register_pernet_subsys(&packet_net_ops);
-	register_netdevice_notifier(&packet_netdev_notifier);
+	return 0;
+
+out_pernet:
+	unregister_pernet_subsys(&packet_net_ops);
+out_sock:
+	sock_unregister(PF_PACKET);
+out_proto:
+	proto_unregister(&packet_proto);
 out:
 	return rc;
 }

[PATCH 4.14 109/115] vlan: disable SIOCSHWTSTAMP in container

[Greg Kroah-Hartman]

From: Hangbin Liu <liuhangbin@gmail.com>

[ Upstream commit 873017af778439f2f8e3d87f28ddb1fcaf244a76 ]

With NET_ADMIN enabled in container, a normal user could be mapped to
root and is able to change the real device's rx filter via ioctl on
vlan, which would affect the other ptp process on host. Fix it by
disabling SIOCSHWTSTAMP in container.

Fixes: a6111d3c93d0 ("vlan: Pass SIOC[SG]HWTSTAMP ioctls to real device")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/8021q/vlan_dev.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -366,10 +366,12 @@ static int vlan_dev_ioctl(struct net_dev
 	ifrr.ifr_ifru = ifr->ifr_ifru;
 
 	switch (cmd) {
+	case SIOCSHWTSTAMP:
+		if (!net_eq(dev_net(dev), &init_net))
+			break;
 	case SIOCGMIIPHY:
 	case SIOCGMIIREG:
 	case SIOCSMIIREG:
-	case SIOCSHWTSTAMP:
 	case SIOCGHWTSTAMP:
 		if (netif_device_present(real_dev) && ops->ndo_do_ioctl)
 			err = ops->ndo_do_ioctl(real_dev, &ifrr, cmd);

[PATCH 4.14 110/115] vrf: sit mtu should not be updated when vrf netdev is the link

[Greg Kroah-Hartman]

From: Stephen Suryaputra <ssuryaextr@gmail.com>

[ Upstream commit ff6ab32bd4e073976e4d8797b4d514a172cfe6cb ]

VRF netdev mtu isn't typically set and have an mtu of 65536. When the
link of a tunnel is set, the tunnel mtu is changed from 1480 to the link
mtu minus tunnel header. In the case of VRF netdev is the link, then the
tunnel mtu becomes 65516. So, fix it by not setting the tunnel mtu in
this case.

Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/sit.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -1070,7 +1070,7 @@ static void ipip6_tunnel_bind_dev(struct
 	if (!tdev && tunnel->parms.link)
 		tdev = __dev_get_by_index(tunnel->net, tunnel->parms.link);
 
-	if (tdev) {
+	if (tdev && !netif_is_l3_master(tdev)) {
 		int t_hlen = tunnel->hlen + sizeof(struct iphdr);
 
 		dev->hard_header_len = tdev->hard_header_len + sizeof(struct iphdr);

[PATCH 4.14 111/115] tipc: fix hanging clients using poll with EPOLLOUT flag

[Greg Kroah-Hartman]

From: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@gmail.com>

[ Upstream commit ff946833b70e0c7f93de9a3f5b329b5ae2287b38 ]

commit 517d7c79bdb398 ("tipc: fix hanging poll() for stream sockets")
introduced a regression for clients using non-blocking sockets.
After the commit, we send EPOLLOUT event to the client even in
TIPC_CONNECTING state. This causes the subsequent send() to fail
with ENOTCONN, as the socket is still not in TIPC_ESTABLISHED state.

In this commit, we:
- improve the fix for hanging poll() by replacing sk_data_ready()
  with sk_state_change() to wake up all clients.
- revert the faulty updates introduced by commit 517d7c79bdb398
  ("tipc: fix hanging poll() for stream sockets").

Fixes: 517d7c79bdb398 ("tipc: fix hanging poll() for stream sockets")
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@gmail.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/tipc/socket.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -709,11 +709,11 @@ static unsigned int tipc_poll(struct fil
 
 	switch (sk->sk_state) {
 	case TIPC_ESTABLISHED:
-	case TIPC_CONNECTING:
 		if (!tsk->cong_link_cnt && !tsk_conn_cong(tsk))
 			mask |= POLLOUT;
 		/* fall thru' */
 	case TIPC_LISTEN:
+	case TIPC_CONNECTING:
 		if (!skb_queue_empty(&sk->sk_receive_queue))
 			mask |= (POLLIN | POLLRDNORM);
 		break;
@@ -1588,7 +1588,7 @@ static bool filter_connect(struct tipc_s
 			return true;
 
 		/* If empty 'ACK-' message, wake up sleeping connect() */
-		sk->sk_data_ready(sk);
+		sk->sk_state_change(sk);
 
 		/* 'ACK-' message is neither accepted nor rejected: */
 		msg_set_dest_droppable(hdr, 1);

[PATCH 4.14 112/115] drivers/virt/fsl_hypervisor.c: dereferencing error pointers in ioctl

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit c8ea3663f7a8e6996d44500ee818c9330ac4fd88 upstream.

strndup_user() returns error pointers on error, and then in the error
handling we pass the error pointers to kfree().  It will cause an Oops.

Link: http://lkml.kernel.org/r/20181218082003.GD32567@kadam
Fixes: 6db7199407ca ("drivers/virt: introduce Freescale hypervisor management driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Timur Tabi <timur@freescale.com>
Cc: Mihai Caraman <mihai.caraman@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/virt/fsl_hypervisor.c |   26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

--- a/drivers/virt/fsl_hypervisor.c
+++ b/drivers/virt/fsl_hypervisor.c
@@ -331,8 +331,8 @@ static long ioctl_dtprop(struct fsl_hv_i
 	struct fsl_hv_ioctl_prop param;
 	char __user *upath, *upropname;
 	void __user *upropval;
-	char *path = NULL, *propname = NULL;
-	void *propval = NULL;
+	char *path, *propname;
+	void *propval;
 	int ret = 0;
 
 	/* Get the parameters from the user. */
@@ -344,32 +344,30 @@ static long ioctl_dtprop(struct fsl_hv_i
 	upropval = (void __user *)(uintptr_t)param.propval;
 
 	path = strndup_user(upath, FH_DTPROP_MAX_PATHLEN);
-	if (IS_ERR(path)) {
-		ret = PTR_ERR(path);
-		goto out;
-	}
+	if (IS_ERR(path))
+		return PTR_ERR(path);
 
 	propname = strndup_user(upropname, FH_DTPROP_MAX_PATHLEN);
 	if (IS_ERR(propname)) {
 		ret = PTR_ERR(propname);
-		goto out;
+		goto err_free_path;
 	}
 
 	if (param.proplen > FH_DTPROP_MAX_PROPLEN) {
 		ret = -EINVAL;
-		goto out;
+		goto err_free_propname;
 	}
 
 	propval = kmalloc(param.proplen, GFP_KERNEL);
 	if (!propval) {
 		ret = -ENOMEM;
-		goto out;
+		goto err_free_propname;
 	}
 
 	if (set) {
 		if (copy_from_user(propval, upropval, param.proplen)) {
 			ret = -EFAULT;
-			goto out;
+			goto err_free_propval;
 		}
 
 		param.ret = fh_partition_set_dtprop(param.handle,
@@ -388,7 +386,7 @@ static long ioctl_dtprop(struct fsl_hv_i
 			if (copy_to_user(upropval, propval, param.proplen) ||
 			    put_user(param.proplen, &p->proplen)) {
 				ret = -EFAULT;
-				goto out;
+				goto err_free_propval;
 			}
 		}
 	}
@@ -396,10 +394,12 @@ static long ioctl_dtprop(struct fsl_hv_i
 	if (put_user(param.ret, &p->ret))
 		ret = -EFAULT;
 
-out:
-	kfree(path);
+err_free_propval:
 	kfree(propval);
+err_free_propname:
 	kfree(propname);
+err_free_path:
+	kfree(path);
 
 	return ret;
 }

[PATCH 4.14 113/115] drivers/virt/fsl_hypervisor.c: prevent integer overflow in ioctl

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 6a024330650e24556b8a18cc654ad00cfecf6c6c upstream.

The "param.count" value is a u64 thatcomes from the user.  The code
later in the function assumes that param.count is at least one and if
it's not then it leads to an Oops when we dereference the ZERO_SIZE_PTR.

Also the addition can have an integer overflow which would lead us to
allocate a smaller "pages" array than required.  I can't immediately
tell what the possible run times implications are, but it's safest to
prevent the overflow.

Link: http://lkml.kernel.org/r/20181218082129.GE32567@kadam
Fixes: 6db7199407ca ("drivers/virt: introduce Freescale hypervisor management driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Timur Tabi <timur@freescale.com>
Cc: Mihai Caraman <mihai.caraman@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/virt/fsl_hypervisor.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/virt/fsl_hypervisor.c
+++ b/drivers/virt/fsl_hypervisor.c
@@ -215,6 +215,9 @@ static long ioctl_memcpy(struct fsl_hv_i
 	 * hypervisor.
 	 */
 	lb_offset = param.local_vaddr & (PAGE_SIZE - 1);
+	if (param.count == 0 ||
+	    param.count > U64_MAX - lb_offset - PAGE_SIZE + 1)
+		return -EINVAL;
 	num_pages = (param.count + lb_offset + PAGE_SIZE - 1) >> PAGE_SHIFT;
 
 	/* Allocate the buffers we need */

[PATCH 4.14 114/115] powerpc/powernv/idle: Restore IAMR after idle

[Greg Kroah-Hartman]

From: Russell Currey <ruscur@russell.cc>

commit a3f3072db6cad40895c585dce65e36aab997f042 upstream.

Without restoring the IAMR after idle, execution prevention on POWER9
with Radix MMU is overwritten and the kernel can freely execute
userspace without faulting.

This is necessary when returning from any stop state that modifies
user state, as well as hypervisor state.

To test how this fails without this patch, load the lkdtm driver and
do the following:

  $ echo EXEC_USERSPACE > /sys/kernel/debug/provoke-crash/DIRECT

which won't fault, then boot the kernel with powersave=off, where it
will fault. Applying this patch will fix this.

Fixes: 3b10d0095a1e ("powerpc/mm/radix: Prevent kernel execution of user space")
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Akshay Adiga <akshay.adiga@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/idle_book3s.S |   20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

--- a/arch/powerpc/kernel/idle_book3s.S
+++ b/arch/powerpc/kernel/idle_book3s.S
@@ -163,6 +163,9 @@ core_idle_lock_held:
 	bne-	core_idle_lock_held
 	blr
 
+/* Reuse an unused pt_regs slot for IAMR */
+#define PNV_POWERSAVE_IAMR	_DAR
+
 /*
  * Pass requested state in r3:
  *	r3 - PNV_THREAD_NAP/SLEEP/WINKLE in POWER8
@@ -193,6 +196,12 @@ pnv_powersave_common:
 	/* Continue saving state */
 	SAVE_GPR(2, r1)
 	SAVE_NVGPRS(r1)
+
+BEGIN_FTR_SECTION
+	mfspr	r5, SPRN_IAMR
+	std	r5, PNV_POWERSAVE_IAMR(r1)
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
+
 	mfcr	r5
 	std	r5,_CCR(r1)
 	std	r1,PACAR1(r13)
@@ -940,6 +949,17 @@ BEGIN_FTR_SECTION
 END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
 	REST_NVGPRS(r1)
 	REST_GPR(2, r1)
+
+BEGIN_FTR_SECTION
+	/* IAMR was saved in pnv_powersave_common() */
+	ld	r5, PNV_POWERSAVE_IAMR(r1)
+	mtspr	SPRN_IAMR, r5
+	/*
+	 * We don't need an isync here because the upcoming mtmsrd is
+	 * execution synchronizing.
+	 */
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
+
 	ld	r4,PACAKMSR(r13)
 	ld	r5,_LINK(r1)
 	ld	r6,_CCR(r1)

[PATCH 4.14 115/115] powerpc/booke64: set RI in default MSR

[Greg Kroah-Hartman]

From: Laurentiu Tudor <laurentiu.tudor@nxp.com>

commit 5266e58d6cd90ac85c187d673093ad9cb649e16d upstream.

Set RI in the default kernel's MSR so that the architected way of
detecting unrecoverable machine check interrupts has a chance to work.
This is inline with the MSR setup of the rest of booke powerpc
architectures configured here.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/include/asm/reg_booke.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -41,7 +41,7 @@
 #if defined(CONFIG_PPC_BOOK3E_64)
 #define MSR_64BIT	MSR_CM
 
-#define MSR_		(MSR_ME | MSR_CE)
+#define MSR_		(MSR_ME | MSR_RI | MSR_CE)
 #define MSR_KERNEL	(MSR_ | MSR_64BIT)
 #define MSR_USER32	(MSR_ | MSR_PR | MSR_EE)
 #define MSR_USER64	(MSR_USER32 | MSR_64BIT)

Re: [PATCH 4.14 053/115] i2c: omap: Enable for ARCH_K3

[Grygorii Strashko]

Hi Greg,

On 15.05.19 13:55, Greg Kroah-Hartman wrote:
> [ Upstream commit 5b277402deac0691226a947df71c581686bd4020 ]
> 
> Allow I2C_OMAP to be built for K3 platforms.
> 
> Signed-off-by: Vignesh R <vigneshr@ti.com>
> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>

This is not v4.14 material as there no support for ARCH_K3.
Could you drop it pls.

-- 
Best regards,
grygorii

Re: [PATCH 4.14 067/115] crypto: testmgr - add AES-CFB tests

[Jinpu Wang]

Hi Greg,

This patch causes build failure for me:

In file included from crypto/testmgr.c:54:
crypto/testmgr.h:16081:4: error: 'const struct cipher_testvec' has no
member named 'ptext'
   .ptext = "\x6b\xc1\xbe\xe2\x2e\x40\x9f\x96"
    ^~~~~
crypto/testmgr.h:16089:4: error: 'const struct cipher_testvec' has no
member named 'ctext'
   .ctext = "\x3b\x3f\xd9\x2e\xb7\x2d\xad\x20"
    ^~~~~
crypto/testmgr.h:16097:4: error: 'const struct cipher_testvec' has no
member named 'len'; did you mean 'klen'?
   .len = 64,
    ^~~
    klen
crypto/testmgr.h:16097:10: warning: initialization of 'const char *'
from 'int' makes pointer from integer without a cast
[-Wint-conversion]
   .len = 64,
          ^~
crypto/testmgr.h:16097:10: note: (near initialization for
'aes_cfb_tv_template[0].result')
crypto/testmgr.h:16105:4: error: 'const struct cipher_testvec' has no
member named 'ptext'
   .ptext = "\x6b\xc1\xbe\xe2\x2e\x40\x9f\x96"
    ^~~~~
crypto/testmgr.h:16113:4: error: 'const struct cipher_testvec' has no
member named 'ctext'
   .ctext = "\xcd\xc8\x0d\x6f\xdd\xf1\x8c\xab"
    ^~~~~
crypto/testmgr.h:16121:4: error: 'const struct cipher_testvec' has no
member named 'len'; did you mean 'klen'?
   .len = 64,
    ^~~
    klen
crypto/testmgr.h:16121:10: warning: initialization of 'const char *'
from 'int' makes pointer from integer without a cast
[-Wint-conversion]
   .len = 64,
          ^~
crypto/testmgr.h:16121:10: note: (near initialization for
'aes_cfb_tv_template[1].result')
crypto/testmgr.h:16130:4: error: 'const struct cipher_testvec' has no
member named 'ptext'
   .ptext = "\x6b\xc1\xbe\xe2\x2e\x40\x9f\x96"
    ^~~~~
crypto/testmgr.h:16138:4: error: 'const struct cipher_testvec' has no
member named 'ctext'
   .ctext = "\xdc\x7e\x84\xbf\xda\x79\x16\x4b"
    ^~~~~
crypto/testmgr.h:16146:4: error: 'const struct cipher_testvec' has no
member named 'len'; did you mean 'klen'?
   .len = 64,
    ^~~
    klen
crypto/testmgr.h:16146:10: warning: initialization of 'const char *'
from 'int' makes pointer from integer without a cast
[-Wint-conversion]
   .len = 64,
          ^~
crypto/testmgr.h:16146:10: note: (near initialization for
'aes_cfb_tv_template[2].result')
  CC      drivers/edac/wq.o
crypto/testmgr.c:2353:23: error: 'struct cipher_test_suite' has no
member named 'vecs'; did you mean 'dec'?
 #define __VECS(tv) { .vecs = tv, .count = ARRAY_SIZE(tv) }

Can you drop the patch?

Regards,
Jack

Re: [PATCH 4.14 000/115] 4.14.120-stable review

[Guenter Roeck]

On Wed, May 15, 2019 at 12:54:40PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.120 release.
> There are 115 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri 17 May 2019 09:04:39 AM UTC.
> Anything received after that time might be too late.
> 

There is a build error with s390 builds.

arch/s390/kernel/nospec-branch.c: In function 'nospec_auto_detect':
arch/s390/kernel/nospec-branch.c:84:19: error:
	invalid storage class for function 'spectre_v2_setup_early'

arch/s390/kernel/nospec-branch.c:96:27: error:
	initializer element is not constant

and more. The file has merge damage in function nospec_auto_detect().
Culprit is commit 91788fcb21d0 ("s390/speculation: Support 'mitigations='
cmdline option"). That patch is in v4.14.119, so you'll have to patch
it up manually. Example patch (compile tested) below.

Guenter

---
From c4430ee29bf57cb1327d52b38acf3f616be9d7f5 Mon Sep 17 00:00:00 2001
From: Guenter Roeck <linux@roeck-us.net>
Date: Wed, 15 May 2019 09:22:31 -0700
Subject: [PATCH] s390/speculation: Fix build error caused by bad backport

The backport of commit 0336e04a6520 ("s390/speculation: Support
'mitigations=' cmdline option") introduces a build error. Fix it up.

Fixes: 91788fcb21d0 ("s390/speculation: Support 'mitigations=' cmdline option")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
 arch/s390/kernel/nospec-branch.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/s390/kernel/nospec-branch.c b/arch/s390/kernel/nospec-branch.c
index 83e597688562..6956902bba12 100644
--- a/arch/s390/kernel/nospec-branch.c
+++ b/arch/s390/kernel/nospec-branch.c
@@ -66,6 +66,7 @@ void __init nospec_auto_detect(void)
 		if (IS_ENABLED(CC_USING_EXPOLINE))
 			nospec_disable = 1;
 		__clear_facility(82, S390_lowcore.alt_stfle_fac_list);
+	}
 	if (IS_ENABLED(CC_USING_EXPOLINE)) {
 		/*
 		 * The kernel has been compiled with expolines.
-- 
2.7.4

Re: [PATCH 4.14 067/115] crypto: testmgr - add AES-CFB tests

[Greg Kroah-Hartman]

On Wed, May 15, 2019 at 05:59:38PM +0200, Jinpu Wang wrote:
> Hi Greg,
> 
> This patch causes build failure for me:
> 
> In file included from crypto/testmgr.c:54:
> crypto/testmgr.h:16081:4: error: 'const struct cipher_testvec' has no
> member named 'ptext'
>    .ptext = "\x6b\xc1\xbe\xe2\x2e\x40\x9f\x96"
>     ^~~~~
> crypto/testmgr.h:16089:4: error: 'const struct cipher_testvec' has no
> member named 'ctext'
>    .ctext = "\x3b\x3f\xd9\x2e\xb7\x2d\xad\x20"
>     ^~~~~
> crypto/testmgr.h:16097:4: error: 'const struct cipher_testvec' has no
> member named 'len'; did you mean 'klen'?
>    .len = 64,
>     ^~~
>     klen
> crypto/testmgr.h:16097:10: warning: initialization of 'const char *'
> from 'int' makes pointer from integer without a cast
> [-Wint-conversion]
>    .len = 64,
>           ^~
> crypto/testmgr.h:16097:10: note: (near initialization for
> 'aes_cfb_tv_template[0].result')
> crypto/testmgr.h:16105:4: error: 'const struct cipher_testvec' has no
> member named 'ptext'
>    .ptext = "\x6b\xc1\xbe\xe2\x2e\x40\x9f\x96"
>     ^~~~~
> crypto/testmgr.h:16113:4: error: 'const struct cipher_testvec' has no
> member named 'ctext'
>    .ctext = "\xcd\xc8\x0d\x6f\xdd\xf1\x8c\xab"
>     ^~~~~
> crypto/testmgr.h:16121:4: error: 'const struct cipher_testvec' has no
> member named 'len'; did you mean 'klen'?
>    .len = 64,
>     ^~~
>     klen
> crypto/testmgr.h:16121:10: warning: initialization of 'const char *'
> from 'int' makes pointer from integer without a cast
> [-Wint-conversion]
>    .len = 64,
>           ^~
> crypto/testmgr.h:16121:10: note: (near initialization for
> 'aes_cfb_tv_template[1].result')
> crypto/testmgr.h:16130:4: error: 'const struct cipher_testvec' has no
> member named 'ptext'
>    .ptext = "\x6b\xc1\xbe\xe2\x2e\x40\x9f\x96"
>     ^~~~~
> crypto/testmgr.h:16138:4: error: 'const struct cipher_testvec' has no
> member named 'ctext'
>    .ctext = "\xdc\x7e\x84\xbf\xda\x79\x16\x4b"
>     ^~~~~
> crypto/testmgr.h:16146:4: error: 'const struct cipher_testvec' has no
> member named 'len'; did you mean 'klen'?
>    .len = 64,
>     ^~~
>     klen
> crypto/testmgr.h:16146:10: warning: initialization of 'const char *'
> from 'int' makes pointer from integer without a cast
> [-Wint-conversion]
>    .len = 64,
>           ^~
> crypto/testmgr.h:16146:10: note: (near initialization for
> 'aes_cfb_tv_template[2].result')
>   CC      drivers/edac/wq.o
> crypto/testmgr.c:2353:23: error: 'struct cipher_test_suite' has no
> member named 'vecs'; did you mean 'dec'?
>  #define __VECS(tv) { .vecs = tv, .count = ARRAY_SIZE(tv) }
> 
> Can you drop the patch?

Yes, now dropped.  Sasha, I think I did this same thing in the past :)

Re: [PATCH 4.14 000/115] 4.14.120-stable review

[Greg Kroah-Hartman]

On Wed, May 15, 2019 at 09:26:38AM -0700, Guenter Roeck wrote:
> On Wed, May 15, 2019 at 12:54:40PM +0200, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.14.120 release.
> > There are 115 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Fri 17 May 2019 09:04:39 AM UTC.
> > Anything received after that time might be too late.
> > 
> 
> There is a build error with s390 builds.
> 
> arch/s390/kernel/nospec-branch.c: In function 'nospec_auto_detect':
> arch/s390/kernel/nospec-branch.c:84:19: error:
> 	invalid storage class for function 'spectre_v2_setup_early'
> 
> arch/s390/kernel/nospec-branch.c:96:27: error:
> 	initializer element is not constant
> 
> and more. The file has merge damage in function nospec_auto_detect().
> Culprit is commit 91788fcb21d0 ("s390/speculation: Support 'mitigations='
> cmdline option"). That patch is in v4.14.119, so you'll have to patch
> it up manually. Example patch (compile tested) below.
> 
> Guenter
> 
> ---
> >From c4430ee29bf57cb1327d52b38acf3f616be9d7f5 Mon Sep 17 00:00:00 2001
> From: Guenter Roeck <linux@roeck-us.net>
> Date: Wed, 15 May 2019 09:22:31 -0700
> Subject: [PATCH] s390/speculation: Fix build error caused by bad backport
> 
> The backport of commit 0336e04a6520 ("s390/speculation: Support
> 'mitigations=' cmdline option") introduces a build error. Fix it up.
> 
> Fixes: 91788fcb21d0 ("s390/speculation: Support 'mitigations=' cmdline option")
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
> ---
>  arch/s390/kernel/nospec-branch.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/s390/kernel/nospec-branch.c b/arch/s390/kernel/nospec-branch.c
> index 83e597688562..6956902bba12 100644
> --- a/arch/s390/kernel/nospec-branch.c
> +++ b/arch/s390/kernel/nospec-branch.c
> @@ -66,6 +66,7 @@ void __init nospec_auto_detect(void)
>  		if (IS_ENABLED(CC_USING_EXPOLINE))
>  			nospec_disable = 1;
>  		__clear_facility(82, S390_lowcore.alt_stfle_fac_list);
> +	}
>  	if (IS_ENABLED(CC_USING_EXPOLINE)) {
>  		/*
>  		 * The kernel has been compiled with expolines.
> -- 
> 2.7.4
> 

Yes, that backport was broken, good catch.  Now queued up, thanks.

greg k-h

Re: [PATCH 4.14 053/115] i2c: omap: Enable for ARCH_K3

[Vignesh Raghavendra]

On 15/05/19 6:28 AM, Grygorii Strashko wrote:
> Hi Greg,
> 
> On 15.05.19 13:55, Greg Kroah-Hartman wrote:
>> [ Upstream commit 5b277402deac0691226a947df71c581686bd4020 ]
>>
>> Allow I2C_OMAP to be built for K3 platforms.
>>
>> Signed-off-by: Vignesh R <vigneshr@ti.com>
>> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
>> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
>> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
> 
> This is not v4.14 material as there no support for ARCH_K3.
> Could you drop it pls.
> 

Yes, I had informed not to backport this patch before during other
stable reviews as well:
https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1811579.html

Please drop the patch.

Re: [PATCH 4.14 053/115] i2c: omap: Enable for ARCH_K3

[Greg Kroah-Hartman]

On Wed, May 15, 2019 at 11:53:08AM -0500, Vignesh Raghavendra wrote:
> 
> 
> On 15/05/19 6:28 AM, Grygorii Strashko wrote:
> > Hi Greg,
> > 
> > On 15.05.19 13:55, Greg Kroah-Hartman wrote:
> >> [ Upstream commit 5b277402deac0691226a947df71c581686bd4020 ]
> >>
> >> Allow I2C_OMAP to be built for K3 platforms.
> >>
> >> Signed-off-by: Vignesh R <vigneshr@ti.com>
> >> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
> >> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
> >> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
> > 
> > This is not v4.14 material as there no support for ARCH_K3.
> > Could you drop it pls.
> > 
> 
> Yes, I had informed not to backport this patch before during other
> stable reviews as well:
> https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1811579.html
> 
> Please drop the patch.

Now dropped, thanks.

greg k-h

Re: [PATCH 4.14 000/115] 4.14.120-stable review

[kernelci.org bot]

stable-rc/linux-4.14.y boot: 128 boots: 1 failed, 122 passed with 3 offline, 2 conflicts (v4.14.119-116-g7b9ae876e241)

Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.14.y/kernel/v4.14.119-116-g7b9ae876e241/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.14.y/kernel/v4.14.119-116-g7b9ae876e241/

Tree: stable-rc
Branch: linux-4.14.y
Git Describe: v4.14.119-116-g7b9ae876e241
Git Commit: 7b9ae876e2410f72fbc14db54f141d516adeabca
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 65 unique boards, 23 SoC families, 14 builds out of 201

Boot Regressions Detected:

arm:

    multi_v7_defconfig:
        gcc-8:
          omap4-panda:
              lab-baylibre: new failure (last pass: v4.14.119-98-g8d3df192fd69)

Boot Failure Detected:

arm64:
    defconfig:
        gcc-8:
            rk3399-firefly: 1 failed lab

Offline Platforms:

arm:

    tegra_defconfig:
        gcc-8
            tegra20-iris-512: 1 offline lab

    multi_v7_defconfig:
        gcc-8
            stih410-b2120: 1 offline lab
            tegra20-iris-512: 1 offline lab

Conflicting Boot Failures Detected: (These likely are not failures as other labs are reporting PASS. Needs review.)

arm:
    multi_v7_defconfig:
        omap4-panda:
            lab-baylibre: FAIL (gcc-8)
            lab-baylibre-seattle: PASS (gcc-8)

    davinci_all_defconfig:
        da850-lcdk:
            lab-baylibre: PASS (gcc-8)
            lab-baylibre-seattle: FAIL (gcc-8)

---
For more info write to <info@kernelci.org>

Re: [PATCH 4.14 000/115] 4.14.120-stable review

[Guenter Roeck]

On Wed, May 15, 2019 at 12:54:40PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.120 release.
> There are 115 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri 17 May 2019 09:04:39 AM UTC.
> Anything received after that time might be too late.
> 

mips:malta_defconfig, parisc:defconfig with
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=n:

In file included from crypto/testmgr.c:54:0:
crypto/testmgr.h:16081:4: error:
	'const struct cipher_testvec' has no member named 'ptext'
crypto/testmgr.h:16089:4: error:
	'const struct cipher_testvec' has no member named 'ctext'

and several more. Commit c97feceb948b6 ("crypto: testmgr - add AES-CFB tests")
[upstream commit 7da66670775d201f633577f5b15a4bbeebaaa2b0] is the culprit -
aplying it to v4.14.y would require a backport.

Guenter

Re: [PATCH 4.14 000/115] 4.14.120-stable review

[Greg Kroah-Hartman]

On Wed, May 15, 2019 at 11:17:05AM -0700, Guenter Roeck wrote:
> On Wed, May 15, 2019 at 12:54:40PM +0200, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.14.120 release.
> > There are 115 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Fri 17 May 2019 09:04:39 AM UTC.
> > Anything received after that time might be too late.
> > 
> 
> mips:malta_defconfig, parisc:defconfig with
> CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=n:
> 
> In file included from crypto/testmgr.c:54:0:
> crypto/testmgr.h:16081:4: error:
> 	'const struct cipher_testvec' has no member named 'ptext'
> crypto/testmgr.h:16089:4: error:
> 	'const struct cipher_testvec' has no member named 'ctext'
> 
> and several more. Commit c97feceb948b6 ("crypto: testmgr - add AES-CFB tests")
> [upstream commit 7da66670775d201f633577f5b15a4bbeebaaa2b0] is the culprit -
> aplying it to v4.14.y would require a backport.

Already dropped.  I'll push out a -rc2 as you aren't the only one that
hit this...

thanks,

greg k-h

Re: [PATCH 4.14 000/115] 4.14.120-stable review

[Greg Kroah-Hartman]

On Wed, May 15, 2019 at 08:24:27PM +0200, Greg Kroah-Hartman wrote:
> On Wed, May 15, 2019 at 11:17:05AM -0700, Guenter Roeck wrote:
> > On Wed, May 15, 2019 at 12:54:40PM +0200, Greg Kroah-Hartman wrote:
> > > This is the start of the stable review cycle for the 4.14.120 release.
> > > There are 115 patches in this series, all will be posted as a response
> > > to this one.  If anyone has any issues with these being applied, please
> > > let me know.
> > > 
> > > Responses should be made by Fri 17 May 2019 09:04:39 AM UTC.
> > > Anything received after that time might be too late.
> > > 
> > 
> > mips:malta_defconfig, parisc:defconfig with
> > CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=n:
> > 
> > In file included from crypto/testmgr.c:54:0:
> > crypto/testmgr.h:16081:4: error:
> > 	'const struct cipher_testvec' has no member named 'ptext'
> > crypto/testmgr.h:16089:4: error:
> > 	'const struct cipher_testvec' has no member named 'ctext'
> > 
> > and several more. Commit c97feceb948b6 ("crypto: testmgr - add AES-CFB tests")
> > [upstream commit 7da66670775d201f633577f5b15a4bbeebaaa2b0] is the culprit -
> > aplying it to v4.14.y would require a backport.
> 
> Already dropped.  I'll push out a -rc2 as you aren't the only one that
> hit this...

-rc2 is pushed out now, thanks.

greg k-h

Re: [PATCH 4.14 000/115] 4.14.120-stable review

[Naresh Kamboju]

On Thu, 16 May 2019 at 00:07, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> On Wed, May 15, 2019 at 08:24:27PM +0200, Greg Kroah-Hartman wrote:
> > On Wed, May 15, 2019 at 11:17:05AM -0700, Guenter Roeck wrote:
> > > On Wed, May 15, 2019 at 12:54:40PM +0200, Greg Kroah-Hartman wrote:
> > > > This is the start of the stable review cycle for the 4.14.120 release.
> > > > There are 115 patches in this series, all will be posted as a response
> > > > to this one.  If anyone has any issues with these being applied, please
> > > > let me know.
> > > >
> > > > Responses should be made by Fri 17 May 2019 09:04:39 AM UTC.
> > > > Anything received after that time might be too late.
> > > >
> > >
> > > mips:malta_defconfig, parisc:defconfig with
> > > CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=n:
> > >
> > > In file included from crypto/testmgr.c:54:0:
> > > crypto/testmgr.h:16081:4: error:
> > >     'const struct cipher_testvec' has no member named 'ptext'
> > > crypto/testmgr.h:16089:4: error:
> > >     'const struct cipher_testvec' has no member named 'ctext'
> > >
> > > and several more. Commit c97feceb948b6 ("crypto: testmgr - add AES-CFB tests")
> > > [upstream commit 7da66670775d201f633577f5b15a4bbeebaaa2b0] is the culprit -
> > > aplying it to v4.14.y would require a backport.
> >
> > Already dropped.  I'll push out a -rc2 as you aren't the only one that
> > hit this...
>
> -rc2 is pushed out now, thanks.

4.14.120-rc2 test results report,

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.14.120-rc2
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.14.y
git commit: 76f297797325042039484d833822c683d6335075
git describe: v4.14.119-115-g76f297797325
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.14-oe/build/v4.14.119-115-g76f297797325

No regressions (compared to build v4.14.119)

No fixes (compared to build v4.14.119)

Ran 23545 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* spectre-meltdown-checker-test
* v4l2-compliance
* perf
* ltp-open-posix-tests
* kvm-unit-tests
* ssuite
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.14 000/115] 4.14.120-stable review

[Guenter Roeck]

On 5/15/19 3:54 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.120 release.
> There are 115 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri 17 May 2019 09:04:39 AM UTC.
> Anything received after that time might be too late.
> 

For v4.14.119-115-g76f2977:

Build results:
	total: 172 pass: 172 fail: 0
Qemu test results:
	total: 333 pass: 333 fail: 0

Guenter

Re: [PATCH 4.14 067/115] crypto: testmgr - add AES-CFB tests

[Jinpu Wang]

snip
> >
> > Can you drop the patch?
>
> Yes, now dropped.  Sasha, I think I did this same thing in the past :)
Thanks, I remember I probably reported same thing in the past too :)

Jack

Re: [PATCH 4.14 000/115] 4.14.120-stable review

[Jon Hunter]

On 15/05/2019 11:54, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.120 release.
> There are 115 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri 17 May 2019 09:04:39 AM UTC.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.120-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests are passing for Tegra ...

Test results for stable-v4.14:
    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    24 tests:	24 pass, 0 fail

Linux version:	4.14.120-rc1-g7b9ae87
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic

Re: [PATCH 4.14 000/115] 4.14.120-stable review

[Jon Hunter]

On 15/05/2019 11:54, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.120 release.
> There are 115 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri 17 May 2019 09:04:39 AM UTC.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.120-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests are passing for Tegra ...

Test results for stable-v4.14:
    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    24 tests:	24 pass, 0 fail

Linux version:	4.14.120-rc1-g7b9ae87
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic

Re: [PATCH 4.14 000/115] 4.14.120-stable review

[shuah]

On 5/15/19 4:54 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.120 release.
> There are 115 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri 17 May 2019 09:04:39 AM UTC.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.120-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Re: [PATCH 4.14 082/115] cifs: fix memory leak in SMB2_read

[Lars Persson]

On Wed, May 15, 2019 at 1:19 PM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> [ Upstream commit 05fd5c2c61732152a6bddc318aae62d7e436629b ]
>
> Commit 088aaf17aa79300cab14dbee2569c58cfafd7d6e introduced a leak where
> if SMB2_read() returned an error we would return without freeing the
> request buffer.
>
> Cc: Stable <stable@vger.kernel.org>
> Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
> Signed-off-by: Steve French <stfrench@microsoft.com>
> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
> ---
>  fs/cifs/smb2pdu.c | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c
> index fd2d199dd413e..7936eac5a38a2 100644
> --- a/fs/cifs/smb2pdu.c
> +++ b/fs/cifs/smb2pdu.c
> @@ -2699,6 +2699,7 @@ SMB2_read(const unsigned int xid, struct cifs_io_parms *io_parms,
>                         cifs_dbg(VFS, "Send error in read = %d\n", rc);
>                 }
>                 free_rsp_buf(resp_buftype, rsp_iov.iov_base);
> +               cifs_small_buf_release(req);
>                 return rc == -ENODATA ? 0 : rc;
>         }
>
> --
> 2.20.1
>

This patch should not be in 4.14-stable because
088aaf17aa79300cab14dbee2569c58cfafd7d6e was for 4.18+.

Now we have a double-free crash in SMB2_read because there are 2 calls
to cifs_small_buf_release in the error path.

=============================================================================
BUG cifs_small_rq (Tainted: G    B      O   ): Object already free
-----------------------------------------------------------------------------

INFO: Allocated in mempool_alloc+0x35/0xe4 age=1 cpu=0 pid=21107
kmem_cache_alloc+0x131/0x218
mempool_alloc+0x35/0xe4
cifs_small_buf_get+0x1d/0x3c [cifs]
smb2_new_read_req.constprop.2+0x29/0xd0 [cifs]
SMB2_read+0x39/0x17c [cifs]
cifs_readpage_worker+0x13f/0x470 [cifs]
cifs_readpage+0x67/0x1b8 [cifs]
generic_file_read_iter+0x269/0x904
cifs_strict_readv+0xa3/0xc8 [cifs]
__vfs_read+0x97/0xbc
vfs_read+0x61/0xc8
SyS_pread64+0x4d/0x6c
ret_fast_syscall+0x1/0x64
INFO: Freed in cifs_small_buf_release+0x19/0x90 [cifs] age=0 cpu=0 pid=21107
cifs_small_buf_release+0x19/0x90 [cifs]
SMB2_read+0x83/0x17c [cifs]
cifs_readpage_worker+0x13f/0x470 [cifs]
cifs_readpage+0x67/0x1b8 [cifs]
generic_file_read_iter+0x269/0x904
cifs_strict_readv+0xa3/0xc8 [cifs]
__vfs_read+0x97/0xbc
vfs_read+0x61/0xc8
SyS_pread64+0x4d/0x6c
ret_fast_syscall+0x1/0x64
INFO: Slab 0xbf6fe800 objects=12 used=1 fp=0x8cf00d40 flags=0x8101
INFO: Object 0x8cf01d00 @offset=7424 fp=0x8cf002c0

Redzone 8cf01ce0: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb
................
Redzone 8cf01cf0: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb
................
Object 8cf01d00: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 8cf01d10: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 8cf01d20: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 8cf01d30: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 8cf01d40: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 8cf01d50: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 8cf01d60: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 8cf01d70: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 8cf01d80: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 8cf01d90: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 8cf01da0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 8cf01db0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 8cf01dc0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 8cf01dd0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 8cf01de0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 8cf01df0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 8cf01e00: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 8cf01e10: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 8cf01e20: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 8cf01e30: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 8cf01e40: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 8cf01e50: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 8cf01e60: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 8cf01e70: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 8cf01e80: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 8cf01e90: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 8cf01ea0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 8cf01eb0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5
kkkkkkkkkkkkkkk.
Redzone 8cf01ec0: bb bb bb bb                                      ....
Padding 8cf01f68: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a
ZZZZZZZZZZZZZZZZ
Padding 8cf01f78: 5a 5a 5a 5a 5a 5a 5a 5a                          ZZZZZZZZ
CPU: 0 PID: 21107 Comm: pool-indexer Tainted: G    B      O
4.14.120-axis5-devel #1
Hardware name: Axis ARTPEC-7 Platform
[<8010d031>] (unwind_backtrace) from [<80109f21>] (show_stack+0x11/0x14)
[<80109f21>] (show_stack) from [<8051e1d1>] (dump_stack+0x69/0x78)
[<8051e1d1>] (dump_stack) from [<802179cd>] (free_debug_processing+0x289/0x2b4)
[<802179cd>] (free_debug_processing) from [<80217b81>] (__slab_free+0x189/0x26c)
[<80217b81>] (__slab_free) from [<80217dc5>] (kmem_cache_free+0x161/0x1ec)
[<80217dc5>] (kmem_cache_free) from [<7fad04c1>]
(cifs_small_buf_release+0x19/0x90 [cifs])
[<7fad04c1>] (cifs_small_buf_release [cifs]) from [<7fae1e43>]
(SMB2_read+0xd3/0x17c [cifs])
[<7fae1e43>] (SMB2_read [cifs]) from [<7fac5aeb>]
(cifs_readpage_worker+0x13f/0x470 [cifs])
[<7fac5aeb>] (cifs_readpage_worker [cifs]) from [<7fac6127>]
(cifs_readpage+0x67/0x1b8 [cifs])
[<7fac6127>] (cifs_readpage [cifs]) from [<801dc855>]
(generic_file_read_iter+0x269/0x904)
[<801dc855>] (generic_file_read_iter) from [<7facb193>]
(cifs_strict_readv+0xa3/0xc8 [cifs])
[<7facb193>] (cifs_strict_readv [cifs]) from [<8022855f>] (__vfs_read+0x97/0xbc)
[<8022855f>] (__vfs_read) from [<802285e5>] (vfs_read+0x61/0xc8)
[<802285e5>] (vfs_read) from [<80228a4d>] (SyS_pread64+0x4d/0x6c)
[<80228a4d>] (SyS_pread64) from [<80106d81>] (ret_fast_syscall+0x1/0x64)
FIX cifs_small_rq: Object at 0x8cf01d00 not freed

Re: [PATCH 4.14 082/115] cifs: fix memory leak in SMB2_read

[Greg Kroah-Hartman]

On Thu, May 23, 2019 at 09:53:31AM +0200, Lars Persson wrote:
> On Wed, May 15, 2019 at 1:19 PM Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > [ Upstream commit 05fd5c2c61732152a6bddc318aae62d7e436629b ]
> >
> > Commit 088aaf17aa79300cab14dbee2569c58cfafd7d6e introduced a leak where
> > if SMB2_read() returned an error we would return without freeing the
> > request buffer.
> >
> > Cc: Stable <stable@vger.kernel.org>
> > Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
> > Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
> > Signed-off-by: Steve French <stfrench@microsoft.com>
> > Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
> > ---
> >  fs/cifs/smb2pdu.c | 1 +
> >  1 file changed, 1 insertion(+)
> >
> > diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c
> > index fd2d199dd413e..7936eac5a38a2 100644
> > --- a/fs/cifs/smb2pdu.c
> > +++ b/fs/cifs/smb2pdu.c
> > @@ -2699,6 +2699,7 @@ SMB2_read(const unsigned int xid, struct cifs_io_parms *io_parms,
> >                         cifs_dbg(VFS, "Send error in read = %d\n", rc);
> >                 }
> >                 free_rsp_buf(resp_buftype, rsp_iov.iov_base);
> > +               cifs_small_buf_release(req);
> >                 return rc == -ENODATA ? 0 : rc;
> >         }
> >
> > --
> > 2.20.1
> >
> 
> This patch should not be in 4.14-stable because
> 088aaf17aa79300cab14dbee2569c58cfafd7d6e was for 4.18+.
> 
> Now we have a double-free crash in SMB2_read because there are 2 calls
> to cifs_small_buf_release in the error path.
> 
> =============================================================================
> BUG cifs_small_rq (Tainted: G    B      O   ): Object already free
> -----------------------------------------------------------------------------
> 
> INFO: Allocated in mempool_alloc+0x35/0xe4 age=1 cpu=0 pid=21107
> kmem_cache_alloc+0x131/0x218
> mempool_alloc+0x35/0xe4
> cifs_small_buf_get+0x1d/0x3c [cifs]
> smb2_new_read_req.constprop.2+0x29/0xd0 [cifs]
> SMB2_read+0x39/0x17c [cifs]
> cifs_readpage_worker+0x13f/0x470 [cifs]
> cifs_readpage+0x67/0x1b8 [cifs]
> generic_file_read_iter+0x269/0x904
> cifs_strict_readv+0xa3/0xc8 [cifs]
> __vfs_read+0x97/0xbc
> vfs_read+0x61/0xc8
> SyS_pread64+0x4d/0x6c
> ret_fast_syscall+0x1/0x64
> INFO: Freed in cifs_small_buf_release+0x19/0x90 [cifs] age=0 cpu=0 pid=21107
> cifs_small_buf_release+0x19/0x90 [cifs]
> SMB2_read+0x83/0x17c [cifs]
> cifs_readpage_worker+0x13f/0x470 [cifs]
> cifs_readpage+0x67/0x1b8 [cifs]
> generic_file_read_iter+0x269/0x904
> cifs_strict_readv+0xa3/0xc8 [cifs]
> __vfs_read+0x97/0xbc
> vfs_read+0x61/0xc8
> SyS_pread64+0x4d/0x6c
> ret_fast_syscall+0x1/0x64
> INFO: Slab 0xbf6fe800 objects=12 used=1 fp=0x8cf00d40 flags=0x8101
> INFO: Object 0x8cf01d00 @offset=7424 fp=0x8cf002c0
> 
> Redzone 8cf01ce0: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb
> ................
> Redzone 8cf01cf0: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb
> ................
> Object 8cf01d00: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
> kkkkkkkkkkkkkkkk
> Object 8cf01d10: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
> kkkkkkkkkkkkkkkk
> Object 8cf01d20: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
> kkkkkkkkkkkkkkkk
> Object 8cf01d30: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
> kkkkkkkkkkkkkkkk
> Object 8cf01d40: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
> kkkkkkkkkkkkkkkk
> Object 8cf01d50: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
> kkkkkkkkkkkkkkkk
> Object 8cf01d60: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
> kkkkkkkkkkkkkkkk
> Object 8cf01d70: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
> kkkkkkkkkkkkkkkk
> Object 8cf01d80: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
> kkkkkkkkkkkkkkkk
> Object 8cf01d90: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
> kkkkkkkkkkkkkkkk
> Object 8cf01da0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
> kkkkkkkkkkkkkkkk
> Object 8cf01db0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
> kkkkkkkkkkkkkkkk
> Object 8cf01dc0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
> kkkkkkkkkkkkkkkk
> Object 8cf01dd0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
> kkkkkkkkkkkkkkkk
> Object 8cf01de0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
> kkkkkkkkkkkkkkkk
> Object 8cf01df0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
> kkkkkkkkkkkkkkkk
> Object 8cf01e00: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
> kkkkkkkkkkkkkkkk
> Object 8cf01e10: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
> kkkkkkkkkkkkkkkk
> Object 8cf01e20: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
> kkkkkkkkkkkkkkkk
> Object 8cf01e30: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
> kkkkkkkkkkkkkkkk
> Object 8cf01e40: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
> kkkkkkkkkkkkkkkk
> Object 8cf01e50: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
> kkkkkkkkkkkkkkkk
> Object 8cf01e60: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
> kkkkkkkkkkkkkkkk
> Object 8cf01e70: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
> kkkkkkkkkkkkkkkk
> Object 8cf01e80: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
> kkkkkkkkkkkkkkkk
> Object 8cf01e90: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
> kkkkkkkkkkkkkkkk
> Object 8cf01ea0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
> kkkkkkkkkkkkkkkk
> Object 8cf01eb0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5
> kkkkkkkkkkkkkkk.
> Redzone 8cf01ec0: bb bb bb bb                                      ....
> Padding 8cf01f68: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a
> ZZZZZZZZZZZZZZZZ
> Padding 8cf01f78: 5a 5a 5a 5a 5a 5a 5a 5a                          ZZZZZZZZ
> CPU: 0 PID: 21107 Comm: pool-indexer Tainted: G    B      O
> 4.14.120-axis5-devel #1
> Hardware name: Axis ARTPEC-7 Platform
> [<8010d031>] (unwind_backtrace) from [<80109f21>] (show_stack+0x11/0x14)
> [<80109f21>] (show_stack) from [<8051e1d1>] (dump_stack+0x69/0x78)
> [<8051e1d1>] (dump_stack) from [<802179cd>] (free_debug_processing+0x289/0x2b4)
> [<802179cd>] (free_debug_processing) from [<80217b81>] (__slab_free+0x189/0x26c)
> [<80217b81>] (__slab_free) from [<80217dc5>] (kmem_cache_free+0x161/0x1ec)
> [<80217dc5>] (kmem_cache_free) from [<7fad04c1>]
> (cifs_small_buf_release+0x19/0x90 [cifs])
> [<7fad04c1>] (cifs_small_buf_release [cifs]) from [<7fae1e43>]
> (SMB2_read+0xd3/0x17c [cifs])
> [<7fae1e43>] (SMB2_read [cifs]) from [<7fac5aeb>]
> (cifs_readpage_worker+0x13f/0x470 [cifs])
> [<7fac5aeb>] (cifs_readpage_worker [cifs]) from [<7fac6127>]
> (cifs_readpage+0x67/0x1b8 [cifs])
> [<7fac6127>] (cifs_readpage [cifs]) from [<801dc855>]
> (generic_file_read_iter+0x269/0x904)
> [<801dc855>] (generic_file_read_iter) from [<7facb193>]
> (cifs_strict_readv+0xa3/0xc8 [cifs])
> [<7facb193>] (cifs_strict_readv [cifs]) from [<8022855f>] (__vfs_read+0x97/0xbc)
> [<8022855f>] (__vfs_read) from [<802285e5>] (vfs_read+0x61/0xc8)
> [<802285e5>] (vfs_read) from [<80228a4d>] (SyS_pread64+0x4d/0x6c)
> [<80228a4d>] (SyS_pread64) from [<80106d81>] (ret_fast_syscall+0x1/0x64)
> FIX cifs_small_rq: Object at 0x8cf01d00 not freed

Ah, my fault, thanks for letting me know.  I'll go revert this right
now.

thanks,

greg k-h