use bios directly in the log code v2

use bios directly in the log code v2

[Christoph Hellwig]

Hi all,

this series switches the log writing and log recovery code to use bios
directly, and remove various special cases from the buffer cache code.
Note that I have developed it on top of the previous series of log item
related cleanups, so if you don't have that applied there is a small
conflict.  To make life easier I have pushed out a git branche here:

    git://git.infradead.org/users/hch/xfs.git xfs-log-bio

Gitweb:

    http://git.infradead.org/users/hch/xfs.git/shortlog/refs/heads/xfs-log-bio

Changes since v1:
 - rebased to not required the log item series first
 - split the bio-related code out of xfs_log_recover.c into a new file
   to ease using xfs_log_recover.c in xfsprogs
 - use kmem_alloc_large instead of vmalloc to allocate the buffer
 - additional minor cleanups

[PATCH 01/20] xfs: remove the no-op spinlock_destroy stub

[Christoph Hellwig]

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/xfs_linux.h | 2 --
 fs/xfs/xfs_log.c   | 2 --
 2 files changed, 4 deletions(-)

diff --git a/fs/xfs/xfs_linux.h b/fs/xfs/xfs_linux.h
index edbd5a210df2..b78287666309 100644
--- a/fs/xfs/xfs_linux.h
+++ b/fs/xfs/xfs_linux.h
@@ -110,8 +110,6 @@ typedef __u32			xfs_nlink_t;
 #define current_restore_flags_nested(sp, f)	\
 		(current->flags = ((current->flags & ~(f)) | (*(sp) & (f))))
 
-#define spinlock_destroy(lock)
-
 #define NBBY		8		/* number of bits per byte */
 
 /*
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 457ced3ee3e1..a2048e46be4e 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -1580,7 +1580,6 @@ xlog_alloc_log(
 			xfs_buf_free(iclog->ic_bp);
 		kmem_free(iclog);
 	}
-	spinlock_destroy(&log->l_icloglock);
 	xfs_buf_free(log->l_xbuf);
 out_free_log:
 	kmem_free(log);
@@ -2027,7 +2026,6 @@ xlog_dealloc_log(
 		kmem_free(iclog);
 		iclog = next_iclog;
 	}
-	spinlock_destroy(&log->l_icloglock);
 
 	log->l_mp->m_log = NULL;
 	kmem_free(log);
-- 
2.20.1

Re: [PATCH 01/20] xfs: remove the no-op spinlock_destroy stub

[Dave Chinner]

On Thu, May 23, 2019 at 07:37:23PM +0200, Christoph Hellwig wrote:
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
>  fs/xfs/xfs_linux.h | 2 --
>  fs/xfs/xfs_log.c   | 2 --
>  2 files changed, 4 deletions(-)

Simple enough :)

Reviewed-by: Dave Chinner <dchinner@redhat.com>

-- 
Dave Chinner
david@fromorbit.com

[PATCH 02/20] xfs: remove the never used _XBF_COMPOUND flag

[Christoph Hellwig]

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/xfs_buf.h | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/fs/xfs/xfs_buf.h b/fs/xfs/xfs_buf.h
index d0b96e071cec..4f2c2bc43003 100644
--- a/fs/xfs/xfs_buf.h
+++ b/fs/xfs/xfs_buf.h
@@ -49,7 +49,6 @@ typedef enum {
 #define _XBF_PAGES	 (1 << 20)/* backed by refcounted pages */
 #define _XBF_KMEM	 (1 << 21)/* backed by heap memory */
 #define _XBF_DELWRI_Q	 (1 << 22)/* buffer on a delwri queue */
-#define _XBF_COMPOUND	 (1 << 23)/* compound buffer */
 
 typedef unsigned int xfs_buf_flags_t;
 
@@ -69,8 +68,7 @@ typedef unsigned int xfs_buf_flags_t;
 	{ XBF_UNMAPPED,		"UNMAPPED" },	/* ditto */\
 	{ _XBF_PAGES,		"PAGES" }, \
 	{ _XBF_KMEM,		"KMEM" }, \
-	{ _XBF_DELWRI_Q,	"DELWRI_Q" }, \
-	{ _XBF_COMPOUND,	"COMPOUND" }
+	{ _XBF_DELWRI_Q,	"DELWRI_Q" }
 
 
 /*
-- 
2.20.1

Re: [PATCH 02/20] xfs: remove the never used _XBF_COMPOUND flag

[Dave Chinner]

On Thu, May 23, 2019 at 07:37:24PM +0200, Christoph Hellwig wrote:
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
>  fs/xfs/xfs_buf.h | 4 +---
>  1 file changed, 1 insertion(+), 3 deletions(-)
> 
> diff --git a/fs/xfs/xfs_buf.h b/fs/xfs/xfs_buf.h
> index d0b96e071cec..4f2c2bc43003 100644
> --- a/fs/xfs/xfs_buf.h
> +++ b/fs/xfs/xfs_buf.h
> @@ -49,7 +49,6 @@ typedef enum {
>  #define _XBF_PAGES	 (1 << 20)/* backed by refcounted pages */
>  #define _XBF_KMEM	 (1 << 21)/* backed by heap memory */
>  #define _XBF_DELWRI_Q	 (1 << 22)/* buffer on a delwri queue */
> -#define _XBF_COMPOUND	 (1 << 23)/* compound buffer */
>  
>  typedef unsigned int xfs_buf_flags_t;
>  
> @@ -69,8 +68,7 @@ typedef unsigned int xfs_buf_flags_t;
>  	{ XBF_UNMAPPED,		"UNMAPPED" },	/* ditto */\
>  	{ _XBF_PAGES,		"PAGES" }, \
>  	{ _XBF_KMEM,		"KMEM" }, \
> -	{ _XBF_DELWRI_Q,	"DELWRI_Q" }, \
> -	{ _XBF_COMPOUND,	"COMPOUND" }
> +	{ _XBF_DELWRI_Q,	"DELWRI_Q" }

Guess I forgot to remove that long ago....

Reviewed-by: Dave Chinner <dchinner@redhat.com>
-- 
Dave Chinner
david@fromorbit.com

[PATCH 03/20] xfs: renumber XBF_WRITE_FAIL

[Christoph Hellwig]

Assining a numerical value that is not close to the flags
defined near by is just asking for conflicts later on.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/xfs_buf.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/xfs/xfs_buf.h b/fs/xfs/xfs_buf.h
index 4f2c2bc43003..15f6ce3974ac 100644
--- a/fs/xfs/xfs_buf.h
+++ b/fs/xfs/xfs_buf.h
@@ -34,7 +34,7 @@ typedef enum {
 #define XBF_ASYNC	 (1 << 4) /* initiator will not wait for completion */
 #define XBF_DONE	 (1 << 5) /* all pages in the buffer uptodate */
 #define XBF_STALE	 (1 << 6) /* buffer has been staled, do not find it */
-#define XBF_WRITE_FAIL	 (1 << 24)/* async writes have failed on this buffer */
+#define XBF_WRITE_FAIL	 (1 << 7) /* async writes have failed on this buffer */
 
 /* I/O hints for the BIO layer */
 #define XBF_SYNCIO	 (1 << 10)/* treat this buffer as synchronous I/O */
-- 
2.20.1

Re: [PATCH 03/20] xfs: renumber XBF_WRITE_FAIL

[Dave Chinner]

On Thu, May 23, 2019 at 07:37:25PM +0200, Christoph Hellwig wrote:
> Assining a numerical value that is not close to the flags
> defined near by is just asking for conflicts later on.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>

Make sense

Reviewed-by: Dave Chinner <dchinner@redhat.com>
-- 
Dave Chinner
david@fromorbit.com

[PATCH 04/20] xfs: make mem_to_page available outside of xfs_buf.c

[Christoph Hellwig]

Rename the function to kmem_to_page and move it to kmem.h together
with our kmem_large allocator that may either return kmalloced or
vmalloc pages.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/kmem.h    |  8 ++++++++
 fs/xfs/xfs_buf.c | 13 +------------
 2 files changed, 9 insertions(+), 12 deletions(-)

diff --git a/fs/xfs/kmem.h b/fs/xfs/kmem.h
index 8e6b3ba81c03..267655acd426 100644
--- a/fs/xfs/kmem.h
+++ b/fs/xfs/kmem.h
@@ -124,4 +124,12 @@ kmem_zone_zalloc(kmem_zone_t *zone, xfs_km_flags_t flags)
 	return kmem_zone_alloc(zone, flags | KM_ZERO);
 }
 
+static inline struct page *
+kmem_to_page(void *addr)
+{
+	if (is_vmalloc_addr(addr))
+		return vmalloc_to_page(addr);
+	return virt_to_page(addr);
+}
+
 #endif /* __XFS_SUPPORT_KMEM_H__ */
diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c
index 548344e25128..ade6ec28e1c9 100644
--- a/fs/xfs/xfs_buf.c
+++ b/fs/xfs/xfs_buf.c
@@ -933,17 +933,6 @@ xfs_buf_set_empty(
 	bp->b_maps[0].bm_len = bp->b_length;
 }
 
-static inline struct page *
-mem_to_page(
-	void			*addr)
-{
-	if ((!is_vmalloc_addr(addr))) {
-		return virt_to_page(addr);
-	} else {
-		return vmalloc_to_page(addr);
-	}
-}
-
 int
 xfs_buf_associate_memory(
 	xfs_buf_t		*bp,
@@ -976,7 +965,7 @@ xfs_buf_associate_memory(
 	bp->b_offset = offset;
 
 	for (i = 0; i < bp->b_page_count; i++) {
-		bp->b_pages[i] = mem_to_page((void *)pageaddr);
+		bp->b_pages[i] = kmem_to_page((void *)pageaddr);
 		pageaddr += PAGE_SIZE;
 	}
 
-- 
2.20.1

Re: [PATCH 04/20] xfs: make mem_to_page available outside of xfs_buf.c

[Dave Chinner]

On Thu, May 23, 2019 at 07:37:26PM +0200, Christoph Hellwig wrote:
> Rename the function to kmem_to_page and move it to kmem.h together
> with our kmem_large allocator that may either return kmalloced or
> vmalloc pages.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>

Yup, needed if you are going to use kmem_zalloc_large() for the IO
buffers.

Reviewed-by: Dave Chinner <dchinner@redhat.com>
-- 
Dave Chinner
david@fromorbit.com

[PATCH 05/20] xfs: reformat xlog_get_lowest_lsn

[Christoph Hellwig]

Reformat xlog_get_lowest_lsn to our usual style.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/xfs_log.c | 24 ++++++++++--------------
 1 file changed, 10 insertions(+), 14 deletions(-)

diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index a2048e46be4e..3b82ca8ac9c8 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -2671,27 +2671,23 @@ xlog_state_clean_log(
 
 STATIC xfs_lsn_t
 xlog_get_lowest_lsn(
-	struct xlog	*log)
+	struct xlog		*log)
 {
-	xlog_in_core_t  *lsn_log;
-	xfs_lsn_t	lowest_lsn, lsn;
+	struct xlog_in_core	*iclog = log->l_iclog;
+	xfs_lsn_t		lowest_lsn = 0, lsn;
 
-	lsn_log = log->l_iclog;
-	lowest_lsn = 0;
 	do {
-	    if (!(lsn_log->ic_state & (XLOG_STATE_ACTIVE|XLOG_STATE_DIRTY))) {
-		lsn = be64_to_cpu(lsn_log->ic_header.h_lsn);
-		if ((lsn && !lowest_lsn) ||
-		    (XFS_LSN_CMP(lsn, lowest_lsn) < 0)) {
+		if (iclog->ic_state & (XLOG_STATE_ACTIVE | XLOG_STATE_DIRTY))
+			continue;
+
+		lsn = be64_to_cpu(iclog->ic_header.h_lsn);
+		if ((lsn && !lowest_lsn) || XFS_LSN_CMP(lsn, lowest_lsn) < 0)
 			lowest_lsn = lsn;
-		}
-	    }
-	    lsn_log = lsn_log->ic_next;
-	} while (lsn_log != log->l_iclog);
+	} while ((iclog = iclog->ic_next) != log->l_iclog);
+
 	return lowest_lsn;
 }
 
-
 STATIC void
 xlog_state_do_callback(
 	struct xlog		*log,
-- 
2.20.1

Re: [PATCH 05/20] xfs: reformat xlog_get_lowest_lsn

[Dave Chinner]

On Thu, May 23, 2019 at 07:37:27PM +0200, Christoph Hellwig wrote:
> Reformat xlog_get_lowest_lsn to our usual style.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
>  fs/xfs/xfs_log.c | 24 ++++++++++--------------
>  1 file changed, 10 insertions(+), 14 deletions(-)

Looks good.

Reviewed-by: Dave Chinner <dchinner@redhat.com>
-- 
Dave Chinner
david@fromorbit.com

[PATCH 06/20] xfs: don't use REQ_PREFLUSH for split log writes

[Christoph Hellwig]

If we have to split a log write because it wraps the end of the log we
can't just use REQ_PREFLUSH to flush before the first log write,
as the writes might get reordered somewhere in the I/O stack.  Issue
a manual flush in that case so that the ordering of the two log I/Os
doesn't matter.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/xfs_log.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 3b82ca8ac9c8..646a190e5730 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -1941,7 +1941,7 @@ xlog_sync(
 	 * synchronously here; for an internal log we can simply use the block
 	 * layer state machine for preflushes.
 	 */
-	if (log->l_mp->m_logdev_targp != log->l_mp->m_ddev_targp)
+	if (log->l_mp->m_logdev_targp != log->l_mp->m_ddev_targp || split)
 		xfs_blkdev_issue_flush(log->l_mp->m_ddev_targp);
 	else
 		bp->b_flags |= XBF_FLUSH;
-- 
2.20.1

Re: [PATCH 06/20] xfs: don't use REQ_PREFLUSH for split log writes

[Dave Chinner]

On Thu, May 23, 2019 at 07:37:28PM +0200, Christoph Hellwig wrote:
> If we have to split a log write because it wraps the end of the log we
> can't just use REQ_PREFLUSH to flush before the first log write,
> as the writes might get reordered somewhere in the I/O stack.  Issue
> a manual flush in that case so that the ordering of the two log I/Os
> doesn't matter.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>

Yup, we clear the flush flag from the second buffer so this is
actually necessary. Very subtle, nice catch.

Reviewed-by: Dave Chinner <dchinner@redhat.com>
-- 
Dave Chinner
david@fromorbit.com

[PATCH 07/20] xfs: factor out log buffer writing from xlog_sync

[Christoph Hellwig]

Replace the not very useful xlog_bdstrat wrapper with a new version that
that takes care of all the common logic for writing log buffers.  Use
the opportunity to avoid overloading the buffer address with the log
relative address, and to shed the unused return value.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/xfs_log.c | 125 +++++++++++++++++------------------------------
 1 file changed, 45 insertions(+), 80 deletions(-)

diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 646a190e5730..9a81d2d32ad9 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -45,10 +45,6 @@ STATIC int
 xlog_space_left(
 	struct xlog		*log,
 	atomic64_t		*head);
-STATIC int
-xlog_sync(
-	struct xlog		*log,
-	struct xlog_in_core	*iclog);
 STATIC void
 xlog_dealloc_log(
 	struct xlog		*log);
@@ -1765,28 +1761,34 @@ xlog_cksum(
 	return xfs_end_cksum(crc);
 }
 
-/*
- * The bdstrat callback function for log bufs. This gives us a central
- * place to trap bufs in case we get hit by a log I/O error and need to
- * shutdown. Actually, in practice, even when we didn't get a log error,
- * we transition the iclogs to IOERROR state *after* flushing all existing
- * iclogs to disk. This is because we don't want anymore new transactions to be
- * started or completed afterwards.
- *
- * We lock the iclogbufs here so that we can serialise against IO completion
- * during unmount. We might be processing a shutdown triggered during unmount,
- * and that can occur asynchronously to the unmount thread, and hence we need to
- * ensure that completes before tearing down the iclogbufs. Hence we need to
- * hold the buffer lock across the log IO to acheive that.
- */
-STATIC int
-xlog_bdstrat(
-	struct xfs_buf		*bp)
+STATIC void
+xlog_write_iclog(
+	struct xlog		*log,
+	struct xlog_in_core	*iclog,
+	struct xfs_buf		*bp,
+	uint64_t		bno,
+	bool			flush)
 {
-	struct xlog_in_core	*iclog = bp->b_log_item;
+	ASSERT(bno < log->l_logBBsize);
+	ASSERT(bno + bp->b_io_length <= log->l_logBBsize);
 
+	bp->b_maps[0].bm_bn = log->l_logBBstart + bno;
+	bp->b_log_item = iclog;
+	bp->b_flags &= ~XBF_FLUSH;
+	bp->b_flags |= (XBF_ASYNC | XBF_SYNCIO | XBF_WRITE | XBF_FUA);
+	if (flush)
+		bp->b_flags |= XBF_FLUSH;
+
+	/*
+	 * We lock the iclogbufs here so that we can serialise against I/O
+	 * completion during unmount.  We might be processing a shutdown
+	 * triggered during unmount, and that can occur asynchronously to the
+	 * unmount thread, and hence we need to ensure that completes before
+	 * tearing down the iclogbufs.  Hence we need to hold the buffer lock
+	 * across the log IO to archive that.
+	 */
 	xfs_buf_lock(bp);
-	if (iclog->ic_state & XLOG_STATE_IOERROR) {
+	if (unlikely(iclog->ic_state & XLOG_STATE_IOERROR)) {
 		xfs_buf_ioerror(bp, -EIO);
 		xfs_buf_stale(bp);
 		xfs_buf_ioend(bp);
@@ -1796,11 +1798,10 @@ xlog_bdstrat(
 		 * doing it here. Similarly, IO completion will unlock the
 		 * buffer, so we don't do it here.
 		 */
-		return 0;
+		return;
 	}
 
 	xfs_buf_submit(bp);
-	return 0;
 }
 
 /*
@@ -1823,25 +1824,23 @@ xlog_bdstrat(
  * log will require grabbing the lock though.
  *
  * The entire log manager uses a logical block numbering scheme.  Only
- * log_sync (and then only bwrite()) know about the fact that the log may
- * not start with block zero on a given device.  The log block start offset
- * is added immediately before calling bwrite().
+ * xlog_write_iclog knows about the fact that the log may not start with
+ * block zero on a given device.
  */
-
-STATIC int
+STATIC void
 xlog_sync(
 	struct xlog		*log,
 	struct xlog_in_core	*iclog)
 {
-	xfs_buf_t	*bp;
 	int		i;
 	uint		count;		/* byte count of bwrite */
 	uint		count_init;	/* initial count before roundup */
 	int		roundoff;       /* roundoff to BB or stripe */
 	int		split = 0;	/* split write into two regions */
-	int		error;
 	int		v2 = xfs_sb_version_haslogv2(&log->l_mp->m_sb);
+	uint64_t	bno;
 	int		size;
+	bool		flush = true;
 
 	XFS_STATS_INC(log->l_mp, xs_log_writes);
 	ASSERT(atomic_read(&iclog->ic_refcnt) == 0);
@@ -1877,17 +1876,16 @@ xlog_sync(
 		size += roundoff;
 	iclog->ic_header.h_len = cpu_to_be32(size);
 
-	bp = iclog->ic_bp;
-	XFS_BUF_SET_ADDR(bp, BLOCK_LSN(be64_to_cpu(iclog->ic_header.h_lsn)));
-
 	XFS_STATS_ADD(log->l_mp, xs_log_blocks, BTOBB(count));
 
+	bno = BLOCK_LSN(be64_to_cpu(iclog->ic_header.h_lsn));
+
 	/* Do we need to split this write into 2 parts? */
-	if (XFS_BUF_ADDR(bp) + BTOBB(count) > log->l_logBBsize) {
+	if (bno + BTOBB(count) > log->l_logBBsize) {
 		char		*dptr;
 
-		split = count - (BBTOB(log->l_logBBsize - XFS_BUF_ADDR(bp)));
-		count = BBTOB(log->l_logBBsize - XFS_BUF_ADDR(bp));
+		split = count - (BBTOB(log->l_logBBsize - bno));
+		count = BBTOB(log->l_logBBsize - bno);
 		iclog->ic_bwritecnt = 2;
 
 		/*
@@ -1928,11 +1926,6 @@ xlog_sync(
 			 be64_to_cpu(iclog->ic_header.h_lsn));
 	}
 
-	bp->b_io_length = BTOBB(count);
-	bp->b_log_item = iclog;
-	bp->b_flags &= ~XBF_FLUSH;
-	bp->b_flags |= (XBF_ASYNC | XBF_SYNCIO | XBF_WRITE | XBF_FUA);
-
 	/*
 	 * Flush the data device before flushing the log to make sure all meta
 	 * data written back from the AIL actually made it to disk before
@@ -1941,50 +1934,22 @@ xlog_sync(
 	 * synchronously here; for an internal log we can simply use the block
 	 * layer state machine for preflushes.
 	 */
-	if (log->l_mp->m_logdev_targp != log->l_mp->m_ddev_targp || split)
+	if (log->l_mp->m_logdev_targp != log->l_mp->m_ddev_targp || split) {
 		xfs_blkdev_issue_flush(log->l_mp->m_ddev_targp);
-	else
-		bp->b_flags |= XBF_FLUSH;
+		flush = false;
+	}
 
-	ASSERT(XFS_BUF_ADDR(bp) <= log->l_logBBsize-1);
-	ASSERT(XFS_BUF_ADDR(bp) + BTOBB(count) <= log->l_logBBsize);
+	iclog->ic_bp->b_io_length = BTOBB(count);
 
 	xlog_verify_iclog(log, iclog, count, true);
+	xlog_write_iclog(log, iclog, iclog->ic_bp, bno, flush);
 
-	/* account for log which doesn't start at block #0 */
-	XFS_BUF_SET_ADDR(bp, XFS_BUF_ADDR(bp) + log->l_logBBstart);
-
-	/*
-	 * Don't call xfs_bwrite here. We do log-syncs even when the filesystem
-	 * is shutting down.
-	 */
-	error = xlog_bdstrat(bp);
-	if (error) {
-		xfs_buf_ioerror_alert(bp, "xlog_sync");
-		return error;
-	}
 	if (split) {
-		bp = iclog->ic_log->l_xbuf;
-		XFS_BUF_SET_ADDR(bp, 0);	     /* logical 0 */
-		xfs_buf_associate_memory(bp,
+		xfs_buf_associate_memory(iclog->ic_log->l_xbuf,
 				(char *)&iclog->ic_header + count, split);
-		bp->b_log_item = iclog;
-		bp->b_flags &= ~XBF_FLUSH;
-		bp->b_flags |= (XBF_ASYNC | XBF_SYNCIO | XBF_WRITE | XBF_FUA);
-
-		ASSERT(XFS_BUF_ADDR(bp) <= log->l_logBBsize-1);
-		ASSERT(XFS_BUF_ADDR(bp) + BTOBB(count) <= log->l_logBBsize);
-
-		/* account for internal log which doesn't start at block #0 */
-		XFS_BUF_SET_ADDR(bp, XFS_BUF_ADDR(bp) + log->l_logBBstart);
-		error = xlog_bdstrat(bp);
-		if (error) {
-			xfs_buf_ioerror_alert(bp, "xlog_sync (split)");
-			return error;
-		}
+		xlog_write_iclog(log, iclog, iclog->ic_log->l_xbuf, 0, false);
 	}
-	return 0;
-}	/* xlog_sync */
+}
 
 /*
  * Deallocate a log structure
@@ -3224,7 +3189,7 @@ xlog_state_release_iclog(
 	 * flags after this point.
 	 */
 	if (sync)
-		return xlog_sync(log, iclog);
+		xlog_sync(log, iclog);
 	return 0;
 }	/* xlog_state_release_iclog */
 
-- 
2.20.1

Re: [PATCH 07/20] xfs: factor out log buffer writing from xlog_sync

[Dave Chinner]

On Thu, May 23, 2019 at 07:37:29PM +0200, Christoph Hellwig wrote:
> Replace the not very useful xlog_bdstrat wrapper with a new version that
> that takes care of all the common logic for writing log buffers.  Use
> the opportunity to avoid overloading the buffer address with the log
> relative address, and to shed the unused return value.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>

Some minor things

> @@ -1765,28 +1761,34 @@ xlog_cksum(
>  	return xfs_end_cksum(crc);
>  }
>  
> -/*
> - * The bdstrat callback function for log bufs. This gives us a central
> - * place to trap bufs in case we get hit by a log I/O error and need to
> - * shutdown. Actually, in practice, even when we didn't get a log error,
> - * we transition the iclogs to IOERROR state *after* flushing all existing
> - * iclogs to disk. This is because we don't want anymore new transactions to be
> - * started or completed afterwards.
> - *
> - * We lock the iclogbufs here so that we can serialise against IO completion
> - * during unmount. We might be processing a shutdown triggered during unmount,
> - * and that can occur asynchronously to the unmount thread, and hence we need to
> - * ensure that completes before tearing down the iclogbufs. Hence we need to
> - * hold the buffer lock across the log IO to acheive that.
> - */
> -STATIC int
> -xlog_bdstrat(
> -	struct xfs_buf		*bp)
> +STATIC void
> +xlog_write_iclog(
> +	struct xlog		*log,
> +	struct xlog_in_core	*iclog,
> +	struct xfs_buf		*bp,
> +	uint64_t		bno,
> +	bool			flush)

Can you rename this to need_flush here and in xlog_sync()? I kept
having to check whether it meant "we need a flush" or "we've
already done a flush" while reading the patch.

>  {
> -	struct xlog_in_core	*iclog = bp->b_log_item;
> +	ASSERT(bno < log->l_logBBsize);
> +	ASSERT(bno + bp->b_io_length <= log->l_logBBsize);
>  
> +	bp->b_maps[0].bm_bn = log->l_logBBstart + bno;
> +	bp->b_log_item = iclog;
> +	bp->b_flags &= ~XBF_FLUSH;
> +	bp->b_flags |= (XBF_ASYNC | XBF_SYNCIO | XBF_WRITE | XBF_FUA);
> +	if (flush)
> +		bp->b_flags |= XBF_FLUSH;
> +
> +	/*
> +	 * We lock the iclogbufs here so that we can serialise against I/O
> +	 * completion during unmount.  We might be processing a shutdown
> +	 * triggered during unmount, and that can occur asynchronously to the
> +	 * unmount thread, and hence we need to ensure that completes before
> +	 * tearing down the iclogbufs.  Hence we need to hold the buffer lock
> +	 * across the log IO to archive that.
				^^^^^^^ achieve 
> +	 */

....

> -	ASSERT(XFS_BUF_ADDR(bp) + BTOBB(count) <= log->l_logBBsize);
> +	iclog->ic_bp->b_io_length = BTOBB(count);
>  
>  	xlog_verify_iclog(log, iclog, count, true);
> +	xlog_write_iclog(log, iclog, iclog->ic_bp, bno, flush);

Ok, so we set the io length of the buffer before we call
xlog_write_iclog(), avoiding needing to pass the size into it.

> -	/* account for log which doesn't start at block #0 */
> -	XFS_BUF_SET_ADDR(bp, XFS_BUF_ADDR(bp) + log->l_logBBstart);
> -
> -	/*
> -	 * Don't call xfs_bwrite here. We do log-syncs even when the filesystem
> -	 * is shutting down.
> -	 */
> -	error = xlog_bdstrat(bp);
> -	if (error) {
> -		xfs_buf_ioerror_alert(bp, "xlog_sync");
> -		return error;
> -	}
>  	if (split) {
> -		bp = iclog->ic_log->l_xbuf;
> -		XFS_BUF_SET_ADDR(bp, 0);	     /* logical 0 */
> -		xfs_buf_associate_memory(bp,
> +		xfs_buf_associate_memory(iclog->ic_log->l_xbuf,
>  				(char *)&iclog->ic_header + count, split);
> -		bp->b_log_item = iclog;
> -		bp->b_flags &= ~XBF_FLUSH;
> -		bp->b_flags |= (XBF_ASYNC | XBF_SYNCIO | XBF_WRITE | XBF_FUA);
> -
> -		ASSERT(XFS_BUF_ADDR(bp) <= log->l_logBBsize-1);
> -		ASSERT(XFS_BUF_ADDR(bp) + BTOBB(count) <= log->l_logBBsize);
> -
> -		/* account for internal log which doesn't start at block #0 */
> -		XFS_BUF_SET_ADDR(bp, XFS_BUF_ADDR(bp) + log->l_logBBstart);
> -		error = xlog_bdstrat(bp);
> -		if (error) {
> -			xfs_buf_ioerror_alert(bp, "xlog_sync (split)");
> -			return error;
> -		}
> +		xlog_write_iclog(log, iclog, iclog->ic_log->l_xbuf, 0, false);

But on the extra buffer, we don't set it's I/O length at all....

Oh, the setting of the IO length is hidden inside
xfs_buf_associate_memory(). Can you add a comment indicating that
this is why we omit the setting of the io length for the extra
buffer?

Cheers,

Dave.
-- 
Dave Chinner
david@fromorbit.com

Re: [PATCH 07/20] xfs: factor out log buffer writing from xlog_sync

[Christoph Hellwig]

On Fri, May 24, 2019 at 09:04:45AM +1000, Dave Chinner wrote:
> > +STATIC void
> > +xlog_write_iclog(
> > +	struct xlog		*log,
> > +	struct xlog_in_core	*iclog,
> > +	struct xfs_buf		*bp,
> > +	uint64_t		bno,
> > +	bool			flush)
> 
> Can you rename this to need_flush here and in xlog_sync()? I kept
> having to check whether it meant "we need a flush" or "we've
> already done a flush" while reading the patch.

Ok.

> But on the extra buffer, we don't set it's I/O length at all....
> 
> Oh, the setting of the IO length is hidden inside
> xfs_buf_associate_memory(). Can you add a comment indicating that
> this is why we omit the setting of the io length for the extra
> buffer?

Well, for one this is how we've always done it, and second we remove
this whole thing and xfs_buf_associate_memory a few patches down the
road.  I'd rather not bother writing a comment here.

[PATCH 08/20] xfs: factor out splitting of an iclog from xlog_sync

[Christoph Hellwig]

Split out a self-contained chunk of code from xlog_sync that calculates
the split offset for an iclog that wraps the log end and bumps the
cycles for the second half.

Use the chance to bring some sanity to the variables used to track the
split in xlog_sync by not changing the count variable, and instead use
split as the offset for the split and use those to calculate the
sizes and offsets for the two write buffers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/xfs_log.c | 63 +++++++++++++++++++++++++-----------------------
 1 file changed, 33 insertions(+), 30 deletions(-)

diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 9a81d2d32ad9..885470f08554 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -1804,6 +1804,32 @@ xlog_write_iclog(
 	xfs_buf_submit(bp);
 }
 
+/*
+ * Bump the cycle numbers at the start of each block in the part of the iclog
+ * that ends up in the buffer that gets written to the start of the log.
+ *
+ * Watch out for the header magic number case, though.
+ */
+static unsigned int
+xlog_split_iclog(
+	struct xlog		*log,
+	void			*data,
+	uint64_t		bno,
+	unsigned int		count)
+{
+	unsigned int		split_offset = BBTOB(log->l_logBBsize - bno), i;
+
+	for (i = split_offset; i < count; i += BBSIZE) {
+		uint32_t cycle = get_unaligned_be32(data + i);
+
+		if (++cycle == XLOG_HEADER_MAGIC_NUM)
+			cycle++;
+		put_unaligned_be32(cycle, data + i);
+	}
+
+	return split_offset;
+}
+
 /*
  * Flush out the in-core log (iclog) to the on-disk log in an asynchronous 
  * fashion.  Previously, we should have moved the current iclog
@@ -1832,13 +1858,12 @@ xlog_sync(
 	struct xlog		*log,
 	struct xlog_in_core	*iclog)
 {
-	int		i;
 	uint		count;		/* byte count of bwrite */
 	uint		count_init;	/* initial count before roundup */
 	int		roundoff;       /* roundoff to BB or stripe */
-	int		split = 0;	/* split write into two regions */
 	int		v2 = xfs_sb_version_haslogv2(&log->l_mp->m_sb);
 	uint64_t	bno;
+	unsigned int	split = 0;
 	int		size;
 	bool		flush = true;
 
@@ -1881,32 +1906,8 @@ xlog_sync(
 	bno = BLOCK_LSN(be64_to_cpu(iclog->ic_header.h_lsn));
 
 	/* Do we need to split this write into 2 parts? */
-	if (bno + BTOBB(count) > log->l_logBBsize) {
-		char		*dptr;
-
-		split = count - (BBTOB(log->l_logBBsize - bno));
-		count = BBTOB(log->l_logBBsize - bno);
-		iclog->ic_bwritecnt = 2;
-
-		/*
-		 * Bump the cycle numbers at the start of each block in the
-		 * part of the iclog that ends up in the buffer that gets
-		 * written to the start of the log.
-		 *
-		 * Watch out for the header magic number case, though.
-		 */
-		dptr = (char *)&iclog->ic_header + count;
-		for (i = 0; i < split; i += BBSIZE) {
-			uint32_t cycle = be32_to_cpu(*(__be32 *)dptr);
-			if (++cycle == XLOG_HEADER_MAGIC_NUM)
-				cycle++;
-			*(__be32 *)dptr = cpu_to_be32(cycle);
-
-			dptr += BBSIZE;
-		}
-	} else {
-		iclog->ic_bwritecnt = 1;
-	}
+	if (bno + BTOBB(count) > log->l_logBBsize)
+		split = xlog_split_iclog(log, &iclog->ic_header, bno, count);
 
 	/* calculcate the checksum */
 	iclog->ic_header.h_crc = xlog_cksum(log, &iclog->ic_header,
@@ -1939,14 +1940,16 @@ xlog_sync(
 		flush = false;
 	}
 
-	iclog->ic_bp->b_io_length = BTOBB(count);
+	iclog->ic_bp->b_io_length = BTOBB(split ? split : count);
+	iclog->ic_bwritecnt = split ? 2 : 1;
 
 	xlog_verify_iclog(log, iclog, count, true);
 	xlog_write_iclog(log, iclog, iclog->ic_bp, bno, flush);
 
 	if (split) {
 		xfs_buf_associate_memory(iclog->ic_log->l_xbuf,
-				(char *)&iclog->ic_header + count, split);
+				(char *)&iclog->ic_header + split,
+				count - split);
 		xlog_write_iclog(log, iclog, iclog->ic_log->l_xbuf, 0, false);
 	}
 }
-- 
2.20.1

Re: [PATCH 08/20] xfs: factor out splitting of an iclog from xlog_sync

[Dave Chinner]

On Thu, May 23, 2019 at 07:37:30PM +0200, Christoph Hellwig wrote:
> Split out a self-contained chunk of code from xlog_sync that calculates
> the split offset for an iclog that wraps the log end and bumps the
> cycles for the second half.
> 
> Use the chance to bring some sanity to the variables used to track the
> split in xlog_sync by not changing the count variable, and instead use
> split as the offset for the split and use those to calculate the
> sizes and offsets for the two write buffers.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
>  fs/xfs/xfs_log.c | 63 +++++++++++++++++++++++++-----------------------
>  1 file changed, 33 insertions(+), 30 deletions(-)
> 
> diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
> index 9a81d2d32ad9..885470f08554 100644
> --- a/fs/xfs/xfs_log.c
> +++ b/fs/xfs/xfs_log.c
> @@ -1804,6 +1804,32 @@ xlog_write_iclog(
>  	xfs_buf_submit(bp);
>  }
>  
> +/*
> + * Bump the cycle numbers at the start of each block in the part of the iclog
> + * that ends up in the buffer that gets written to the start of the log.
> + *
> + * Watch out for the header magic number case, though.

Can we update this comment to be easier to parse?

/*
 * We need to bump cycle number for the part of the iclog that is
 * written to the start of the log. Watch out for the header magic
 * number case, though.
 */

> + */
> +static unsigned int
> +xlog_split_iclog(
> +	struct xlog		*log,
> +	void			*data,
> +	uint64_t		bno,
> +	unsigned int		count)
> +{
> +	unsigned int		split_offset = BBTOB(log->l_logBBsize - bno), i;

You can lose a tab from all these indents. Also, can you declare
i as a separate statement - I'd prefer we don't mix multiple
declarations with initialisations on the one line - it just makes
the code harder to read. (i.e. I had to specifically look to find
where i was declared...)

> +	for (i = split_offset; i < count; i += BBSIZE) {
> +		uint32_t cycle = get_unaligned_be32(data + i);
> +
> +		if (++cycle == XLOG_HEADER_MAGIC_NUM)
> +			cycle++;
> +		put_unaligned_be32(cycle, data + i);

Is the location we read from/write to ever unaligned? The cycle
should always be 512 byte aligned to the start of the iclog data
buffer, which should always be at least 4 byte aligned in memory...

Otherwise the patch is fine.

Cheers,

Dave.
-- 
Dave Chinner
david@fromorbit.com

Re: [PATCH 08/20] xfs: factor out splitting of an iclog from xlog_sync

[Christoph Hellwig]

On Fri, May 24, 2019 at 09:17:26AM +1000, Dave Chinner wrote:
> > +/*
> > + * Bump the cycle numbers at the start of each block in the part of the iclog
> > + * that ends up in the buffer that gets written to the start of the log.
> > + *
> > + * Watch out for the header magic number case, though.
> 
> Can we update this comment to be easier to parse?
> 
> /*
>  * We need to bump cycle number for the part of the iclog that is
>  * written to the start of the log. Watch out for the header magic
>  * number case, though.
>  */

Sure.

> > +	for (i = split_offset; i < count; i += BBSIZE) {
> > +		uint32_t cycle = get_unaligned_be32(data + i);
> > +
> > +		if (++cycle == XLOG_HEADER_MAGIC_NUM)
> > +			cycle++;
> > +		put_unaligned_be32(cycle, data + i);
> 
> Is the location we read from/write to ever unaligned? The cycle
> should always be 512 byte aligned to the start of the iclog data
> buffer, which should always be at least 4 byte aligned in memory...

I don't think it is unaligned, but the get_unaligned_* and
put_unaligned_* helpers are just really nice ways to read big/little
endian fields from arbitrary char pointers, which is what we do here.

[PATCH 09/20] xfs: factor out iclog size calculation from xlog_sync

[Christoph Hellwig]

Split out another self-contained bit of code from xlog_sync.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/xfs_log.c | 64 ++++++++++++++++++++++++++++--------------------
 1 file changed, 38 insertions(+), 26 deletions(-)

diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 885470f08554..e2c9f74f86f3 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -1830,6 +1830,36 @@ xlog_split_iclog(
 	return split_offset;
 }
 
+static int
+xlog_calc_iclog_size(
+	struct xlog		*log,
+	struct xlog_in_core	*iclog,
+	uint32_t		*roundoff)
+{
+	bool			v2 = xfs_sb_version_haslogv2(&log->l_mp->m_sb);
+	uint32_t		count_init, count;
+
+	/* Add for LR header */
+	count_init = log->l_iclog_hsize + iclog->ic_offset;
+
+	/* Round out the log write size */
+	if (v2 && log->l_mp->m_sb.sb_logsunit > 1) {
+		/* we have a v2 stripe unit to use */
+		count = XLOG_LSUNITTOB(log, XLOG_BTOLSUNIT(log, count_init));
+	} else {
+		count = BBTOB(BTOBB(count_init));
+	}
+
+	ASSERT(count >= count_init);
+	*roundoff = count - count_init;
+
+	if (v2 && log->l_mp->m_sb.sb_logsunit > 1)
+		ASSERT(*roundoff < log->l_mp->m_sb.sb_logsunit);
+	else
+		ASSERT(*roundoff < BBTOB(1));
+	return count;
+}
+
 /*
  * Flush out the in-core log (iclog) to the on-disk log in an asynchronous 
  * fashion.  Previously, we should have moved the current iclog
@@ -1858,35 +1888,17 @@ xlog_sync(
 	struct xlog		*log,
 	struct xlog_in_core	*iclog)
 {
-	uint		count;		/* byte count of bwrite */
-	uint		count_init;	/* initial count before roundup */
-	int		roundoff;       /* roundoff to BB or stripe */
-	int		v2 = xfs_sb_version_haslogv2(&log->l_mp->m_sb);
-	uint64_t	bno;
-	unsigned int	split = 0;
-	int		size;
-	bool		flush = true;
+	unsigned int		count;		/* byte count of bwrite */
+	unsigned int		roundoff;       /* roundoff to BB or stripe */
+	uint64_t		bno;
+	unsigned int		split = 0;
+	unsigned int		size;
+	bool			flush = true;
 
 	XFS_STATS_INC(log->l_mp, xs_log_writes);
 	ASSERT(atomic_read(&iclog->ic_refcnt) == 0);
 
-	/* Add for LR header */
-	count_init = log->l_iclog_hsize + iclog->ic_offset;
-
-	/* Round out the log write size */
-	if (v2 && log->l_mp->m_sb.sb_logsunit > 1) {
-		/* we have a v2 stripe unit to use */
-		count = XLOG_LSUNITTOB(log, XLOG_BTOLSUNIT(log, count_init));
-	} else {
-		count = BBTOB(BTOBB(count_init));
-	}
-	roundoff = count - count_init;
-	ASSERT(roundoff >= 0);
-	ASSERT((v2 && log->l_mp->m_sb.sb_logsunit > 1 && 
-                roundoff < log->l_mp->m_sb.sb_logsunit)
-		|| 
-		(log->l_mp->m_sb.sb_logsunit <= 1 && 
-		 roundoff < BBTOB(1)));
+	count = xlog_calc_iclog_size(log, iclog, &roundoff);
 
 	/* move grant heads by roundoff in sync */
 	xlog_grant_add_space(log, &log->l_reserve_head.grant, roundoff);
@@ -1897,7 +1909,7 @@ xlog_sync(
 
 	/* real byte length */
 	size = iclog->ic_offset;
-	if (v2)
+	if (xfs_sb_version_haslogv2(&log->l_mp->m_sb))
 		size += roundoff;
 	iclog->ic_header.h_len = cpu_to_be32(size);
 
-- 
2.20.1

Re: [PATCH 09/20] xfs: factor out iclog size calculation from xlog_sync

[Dave Chinner]

On Thu, May 23, 2019 at 07:37:31PM +0200, Christoph Hellwig wrote:
> Split out another self-contained bit of code from xlog_sync.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
>  fs/xfs/xfs_log.c | 64 ++++++++++++++++++++++++++++--------------------
>  1 file changed, 38 insertions(+), 26 deletions(-)
> 
> diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
> index 885470f08554..e2c9f74f86f3 100644
> --- a/fs/xfs/xfs_log.c
> +++ b/fs/xfs/xfs_log.c
> @@ -1830,6 +1830,36 @@ xlog_split_iclog(
>  	return split_offset;
>  }
>  
> +static int
> +xlog_calc_iclog_size(
> +	struct xlog		*log,
> +	struct xlog_in_core	*iclog,
> +	uint32_t		*roundoff)
> +{
> +	bool			v2 = xfs_sb_version_haslogv2(&log->l_mp->m_sb);
> +	uint32_t		count_init, count;
> +
> +	/* Add for LR header */
> +	count_init = log->l_iclog_hsize + iclog->ic_offset;
> +
> +	/* Round out the log write size */
> +	if (v2 && log->l_mp->m_sb.sb_logsunit > 1) {

Hmmm, seeing as this is a now a standalone function, perhaps it
would make more sense to precalculate this whole check like so:

	bool			use_lsunit;

	use_lsunit = xfs_sb_version_haslogv2(&log->l_mp->m_sb) &&
			log->l_mp->m_sb.sb_logsunit > 1;

	if (use_lsunit) {
> +		/* we have a v2 stripe unit to use */
> +		count = XLOG_LSUNITTOB(log, XLOG_BTOLSUNIT(log, count_init));
> +	} else {
> +		count = BBTOB(BTOBB(count_init));
> +	}

Otherwise the patch looks good.

Cheers,

Dave.
-- 
Dave Chinner
david@fromorbit.com

[PATCH 10/20] xfs: update both stat counters together in xlog_sync

[Christoph Hellwig]

Just a small bit of code tidying up.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/xfs_log.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index e2c9f74f86f3..46a184d387ae 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -1895,7 +1895,6 @@ xlog_sync(
 	unsigned int		size;
 	bool			flush = true;
 
-	XFS_STATS_INC(log->l_mp, xs_log_writes);
 	ASSERT(atomic_read(&iclog->ic_refcnt) == 0);
 
 	count = xlog_calc_iclog_size(log, iclog, &roundoff);
@@ -1913,6 +1912,7 @@ xlog_sync(
 		size += roundoff;
 	iclog->ic_header.h_len = cpu_to_be32(size);
 
+	XFS_STATS_INC(log->l_mp, xs_log_writes);
 	XFS_STATS_ADD(log->l_mp, xs_log_blocks, BTOBB(count));
 
 	bno = BLOCK_LSN(be64_to_cpu(iclog->ic_header.h_lsn));
-- 
2.20.1

Re: [PATCH 10/20] xfs: update both stat counters together in xlog_sync

[Dave Chinner]

On Thu, May 23, 2019 at 07:37:32PM +0200, Christoph Hellwig wrote:
> Just a small bit of code tidying up.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>

looks good.

Reviewed-by: Dave Chinner <dchinner@redhat.com>
-- 
Dave Chinner
david@fromorbit.com

[PATCH 11/20] xfs: remove the syncing argument from xlog_verify_iclog

[Christoph Hellwig]

The only caller unconditionally passes true here.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/xfs_log.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 46a184d387ae..1974e47a96fb 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -103,8 +103,7 @@ STATIC void
 xlog_verify_iclog(
 	struct xlog		*log,
 	struct xlog_in_core	*iclog,
-	int			count,
-	bool                    syncing);
+	int			count);
 STATIC void
 xlog_verify_tail_lsn(
 	struct xlog		*log,
@@ -113,7 +112,7 @@ xlog_verify_tail_lsn(
 #else
 #define xlog_verify_dest_ptr(a,b)
 #define xlog_verify_grant_tail(a)
-#define xlog_verify_iclog(a,b,c,d)
+#define xlog_verify_iclog(a,b,c)
 #define xlog_verify_tail_lsn(a,b,c)
 #endif
 
@@ -1955,7 +1954,7 @@ xlog_sync(
 	iclog->ic_bp->b_io_length = BTOBB(split ? split : count);
 	iclog->ic_bwritecnt = split ? 2 : 1;
 
-	xlog_verify_iclog(log, iclog, count, true);
+	xlog_verify_iclog(log, iclog, count);
 	xlog_write_iclog(log, iclog, iclog->ic_bp, bno, flush);
 
 	if (split) {
@@ -3795,8 +3794,7 @@ STATIC void
 xlog_verify_iclog(
 	struct xlog		*log,
 	struct xlog_in_core	*iclog,
-	int			count,
-	bool                    syncing)
+	int			count)
 {
 	xlog_op_header_t	*ophead;
 	xlog_in_core_t		*icptr;
@@ -3840,7 +3838,7 @@ xlog_verify_iclog(
 		/* clientid is only 1 byte */
 		p = &ophead->oh_clientid;
 		field_offset = p - base_ptr;
-		if (!syncing || (field_offset & 0x1ff)) {
+		if (field_offset & 0x1ff) {
 			clientid = ophead->oh_clientid;
 		} else {
 			idx = BTOBBT((char *)&ophead->oh_clientid - iclog->ic_datap);
@@ -3863,7 +3861,7 @@ xlog_verify_iclog(
 		/* check length */
 		p = &ophead->oh_len;
 		field_offset = p - base_ptr;
-		if (!syncing || (field_offset & 0x1ff)) {
+		if (field_offset & 0x1ff) {
 			op_len = be32_to_cpu(ophead->oh_len);
 		} else {
 			idx = BTOBBT((uintptr_t)&ophead->oh_len -
-- 
2.20.1

Re: [PATCH 11/20] xfs: remove the syncing argument from xlog_verify_iclog

[Dave Chinner]

On Thu, May 23, 2019 at 07:37:33PM +0200, Christoph Hellwig wrote:
> The only caller unconditionally passes true here.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>

*nod*

Reviewed-by: Dave Chinner <dchinner@redhat.com>
-- 
Dave Chinner
david@fromorbit.com

[PATCH 12/20] xfs: make use of the l_targ field in struct xlog

[Christoph Hellwig]

Use the slightly shorter way to get at the buftarg for the log device
wherever we can in the log and log recovery code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/xfs_log.c         | 6 +++---
 fs/xfs/xfs_log_recover.c | 4 ++--
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 1974e47a96fb..3c7489b4619b 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -927,7 +927,7 @@ xfs_log_unmount_write(xfs_mount_t *mp)
 	 * Or, if we are doing a forced umount (typically because of IO errors).
 	 */
 	if (mp->m_flags & XFS_MOUNT_NORECOVERY ||
-	    xfs_readonly_buftarg(log->l_mp->m_logdev_targp)) {
+	    xfs_readonly_buftarg(log->l_targ)) {
 		ASSERT(mp->m_flags & XFS_MOUNT_RDONLY);
 		return 0;
 	}
@@ -1481,7 +1481,7 @@ xlog_alloc_log(
 	 * having set it up properly.
 	 */
 	error = -ENOMEM;
-	bp = xfs_buf_alloc(mp->m_logdev_targp, XFS_BUF_DADDR_NULL,
+	bp = xfs_buf_alloc(log->l_targ, XFS_BUF_DADDR_NULL,
 			   BTOBB(log->l_iclog_size), XBF_NO_IOACCT);
 	if (!bp)
 		goto out_free_log;
@@ -1946,7 +1946,7 @@ xlog_sync(
 	 * synchronously here; for an internal log we can simply use the block
 	 * layer state machine for preflushes.
 	 */
-	if (log->l_mp->m_logdev_targp != log->l_mp->m_ddev_targp || split) {
+	if (log->l_targ != log->l_mp->m_ddev_targp || split) {
 		xfs_blkdev_issue_flush(log->l_mp->m_ddev_targp);
 		flush = false;
 	}
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index 9329f5adbfbe..4139b907e9cd 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -134,7 +134,7 @@ xlog_get_bp(
 		nbblks += log->l_sectBBsize;
 	nbblks = round_up(nbblks, log->l_sectBBsize);
 
-	bp = xfs_buf_get_uncached(log->l_mp->m_logdev_targp, nbblks, 0);
+	bp = xfs_buf_get_uncached(log->l_targ, nbblks, 0);
 	if (bp)
 		xfs_buf_unlock(bp);
 	return bp;
@@ -1505,7 +1505,7 @@ xlog_find_tail(
 	 * But... if the -device- itself is readonly, just skip this.
 	 * We can't recover this device anyway, so it won't matter.
 	 */
-	if (!xfs_readonly_buftarg(log->l_mp->m_logdev_targp))
+	if (!xfs_readonly_buftarg(log->l_targ))
 		error = xlog_clear_stale_blocks(log, tail_lsn);
 
 done:
-- 
2.20.1

Re: [PATCH 12/20] xfs: make use of the l_targ field in struct xlog

[Dave Chinner]

On Thu, May 23, 2019 at 07:37:34PM +0200, Christoph Hellwig wrote:
> Use the slightly shorter way to get at the buftarg for the log device
> wherever we can in the log and log recovery code.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>

Looks good.

Reviewed-by: Dave Chinner <dchinner@redhat.com>
-- 
Dave Chinner
david@fromorbit.com

[PATCH 13/20] xfs: use bios directly to write log buffers

[Christoph Hellwig]

Currently the XFS logging code uses the xfs_buf structure and
associated APIs to write the log buffers to disk.  This requires
various special cases in the log code and is generally not very
optimal.

Instead of using a buffer just allocate a kmem_alloc_larger region for
each log buffer, and use a bio and bio_vec array embedded in the iclog
structure to write the buffer to disk.  This also allows for using
the bio split and chaining case to deal with the case of a log
buffer wrapping around the end of the log.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/xfs_log.c      | 220 ++++++++++++++++++++----------------------
 fs/xfs/xfs_log_priv.h |  15 +--
 2 files changed, 112 insertions(+), 123 deletions(-)

diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 3c7489b4619b..6ae51e0067f8 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -1239,32 +1239,32 @@ xlog_space_left(
 }
 
 
-/*
- * Log function which is called when an io completes.
- *
- * The log manager needs its own routine, in order to control what
- * happens with the buffer after the write completes.
- */
 static void
-xlog_iodone(xfs_buf_t *bp)
+xlog_ioend_work(
+	struct work_struct	*work)
 {
-	struct xlog_in_core	*iclog = bp->b_log_item;
-	struct xlog		*l = iclog->ic_log;
+	struct xlog_in_core     *iclog =
+		container_of(work, struct xlog_in_core, ic_end_io_work);
+	struct xlog		*log = iclog->ic_log;
 	int			aborted = 0;
+	int			error;
+
+	if (is_vmalloc_addr(iclog->ic_data))
+		invalidate_kernel_vmap_range(iclog->ic_data, iclog->ic_io_size);
 
 	/*
 	 * Race to shutdown the filesystem if we see an error or the iclog is in
 	 * IOABORT state. The IOABORT state is only set in DEBUG mode to inject
 	 * CRC errors into log recovery.
 	 */
-	if (XFS_TEST_ERROR(bp->b_error, l->l_mp, XFS_ERRTAG_IODONE_IOERR) ||
+	error = blk_status_to_errno(iclog->ic_bio.bi_status);
+	if (XFS_TEST_ERROR(error, log->l_mp, XFS_ERRTAG_IODONE_IOERR) ||
 	    iclog->ic_state & XLOG_STATE_IOABORT) {
 		if (iclog->ic_state & XLOG_STATE_IOABORT)
 			iclog->ic_state &= ~XLOG_STATE_IOABORT;
 
-		xfs_buf_ioerror_alert(bp, __func__);
-		xfs_buf_stale(bp);
-		xfs_force_shutdown(l->l_mp, SHUTDOWN_LOG_IO_ERROR);
+		xfs_alert(log->l_mp, "log I/O error %d", error);
+		xfs_force_shutdown(log->l_mp, SHUTDOWN_LOG_IO_ERROR);
 		/*
 		 * This flag will be propagated to the trans-committed
 		 * callback routines to let them know that the log-commit
@@ -1275,17 +1275,16 @@ xlog_iodone(xfs_buf_t *bp)
 		aborted = XFS_LI_ABORTED;
 	}
 
-	/* log I/O is always issued ASYNC */
-	ASSERT(bp->b_flags & XBF_ASYNC);
 	xlog_state_done_syncing(iclog, aborted);
+	bio_uninit(&iclog->ic_bio);
 
 	/*
-	 * drop the buffer lock now that we are done. Nothing references
-	 * the buffer after this, so an unmount waiting on this lock can now
-	 * tear it down safely. As such, it is unsafe to reference the buffer
-	 * (bp) after the unlock as we could race with it being freed.
+	 * Drop the lock to signal that we are done. Nothing references the
+	 * iclog after this, so an unmount waiting on this lock can now tear it
+	 * down safely. As such, it is unsafe to reference the iclog after the
+	 * unlock as we could race with it being freed.
 	 */
-	xfs_buf_unlock(bp);
+	up(&iclog->ic_sema);
 }
 
 /*
@@ -1417,7 +1416,6 @@ xlog_alloc_log(
 	xlog_rec_header_t	*head;
 	xlog_in_core_t		**iclogp;
 	xlog_in_core_t		*iclog, *prev_iclog=NULL;
-	xfs_buf_t		*bp;
 	int			i;
 	int			error = -ENOMEM;
 	uint			log2_size = 0;
@@ -1475,30 +1473,6 @@ xlog_alloc_log(
 
 	xlog_get_iclog_buffer_size(mp, log);
 
-	/*
-	 * Use a NULL block for the extra log buffer used during splits so that
-	 * it will trigger errors if we ever try to do IO on it without first
-	 * having set it up properly.
-	 */
-	error = -ENOMEM;
-	bp = xfs_buf_alloc(log->l_targ, XFS_BUF_DADDR_NULL,
-			   BTOBB(log->l_iclog_size), XBF_NO_IOACCT);
-	if (!bp)
-		goto out_free_log;
-
-	/*
-	 * The iclogbuf buffer locks are held over IO but we are not going to do
-	 * IO yet.  Hence unlock the buffer so that the log IO path can grab it
-	 * when appropriately.
-	 */
-	ASSERT(xfs_buf_islocked(bp));
-	xfs_buf_unlock(bp);
-
-	/* use high priority wq for log I/O completion */
-	bp->b_ioend_wq = mp->m_log_workqueue;
-	bp->b_iodone = xlog_iodone;
-	log->l_xbuf = bp;
-
 	spin_lock_init(&log->l_icloglock);
 	init_waitqueue_head(&log->l_flush_wait);
 
@@ -1512,7 +1486,9 @@ xlog_alloc_log(
 	 */
 	ASSERT(log->l_iclog_size >= 4096);
 	for (i=0; i < log->l_iclog_bufs; i++) {
-		*iclogp = kmem_zalloc(sizeof(xlog_in_core_t), KM_MAYFAIL);
+		*iclogp = kmem_zalloc(struct_size(*iclogp, ic_bvec,
+				howmany(log->l_iclog_size, PAGE_SIZE)),
+				KM_MAYFAIL);
 		if (!*iclogp)
 			goto out_free_iclog;
 
@@ -1520,20 +1496,10 @@ xlog_alloc_log(
 		iclog->ic_prev = prev_iclog;
 		prev_iclog = iclog;
 
-		bp = xfs_buf_get_uncached(mp->m_logdev_targp,
-					  BTOBB(log->l_iclog_size),
-					  XBF_NO_IOACCT);
-		if (!bp)
+		iclog->ic_data = kmem_alloc_large(log->l_iclog_size,
+				KM_MAYFAIL);
+		if (!iclog->ic_data)
 			goto out_free_iclog;
-
-		ASSERT(xfs_buf_islocked(bp));
-		xfs_buf_unlock(bp);
-
-		/* use high priority wq for log I/O completion */
-		bp->b_ioend_wq = mp->m_log_workqueue;
-		bp->b_iodone = xlog_iodone;
-		iclog->ic_bp = bp;
-		iclog->ic_data = bp->b_addr;
 #ifdef DEBUG
 		log->l_iclog_bak[i] = &iclog->ic_header;
 #endif
@@ -1547,7 +1513,7 @@ xlog_alloc_log(
 		head->h_fmt = cpu_to_be32(XLOG_FMT);
 		memcpy(&head->h_fs_uuid, &mp->m_sb.sb_uuid, sizeof(uuid_t));
 
-		iclog->ic_size = BBTOB(bp->b_length) - log->l_iclog_hsize;
+		iclog->ic_size = log->l_iclog_size - log->l_iclog_hsize;
 		iclog->ic_state = XLOG_STATE_ACTIVE;
 		iclog->ic_log = log;
 		atomic_set(&iclog->ic_refcnt, 0);
@@ -1557,6 +1523,8 @@ xlog_alloc_log(
 
 		init_waitqueue_head(&iclog->ic_force_wait);
 		init_waitqueue_head(&iclog->ic_write_wait);
+		INIT_WORK(&iclog->ic_end_io_work, xlog_ioend_work);
+		sema_init(&iclog->ic_sema, 1);
 
 		iclogp = &iclog->ic_next;
 	}
@@ -1571,11 +1539,9 @@ xlog_alloc_log(
 out_free_iclog:
 	for (iclog = log->l_iclog; iclog; iclog = prev_iclog) {
 		prev_iclog = iclog->ic_next;
-		if (iclog->ic_bp)
-			xfs_buf_free(iclog->ic_bp);
+		kmem_free(iclog->ic_data);
 		kmem_free(iclog);
 	}
-	xfs_buf_free(log->l_xbuf);
 out_free_log:
 	kmem_free(log);
 out:
@@ -1760,23 +1726,43 @@ xlog_cksum(
 	return xfs_end_cksum(crc);
 }
 
+static void
+xlog_bio_end_io(
+	struct bio		*bio)
+{
+	struct xlog_in_core	*iclog = bio->bi_private;
+
+	queue_work(iclog->ic_log->l_mp->m_log_workqueue,
+		   &iclog->ic_end_io_work);
+}
+
+static void
+xlog_map_iclog_data(
+	struct bio		*bio,
+	void			*data,
+	size_t			count)
+{
+	do {
+		struct page	*page = kmem_to_page(data);
+		unsigned int	off = offset_in_page(data);
+		size_t		len = min_t(size_t, count, PAGE_SIZE - off);
+
+		WARN_ON_ONCE(bio_add_page(bio, page, len, off) != len);
+
+		data += len;
+		count -= len;
+	} while (count);
+}
+
 STATIC void
 xlog_write_iclog(
 	struct xlog		*log,
 	struct xlog_in_core	*iclog,
-	struct xfs_buf		*bp,
 	uint64_t		bno,
+	unsigned int		count,
 	bool			flush)
 {
 	ASSERT(bno < log->l_logBBsize);
-	ASSERT(bno + bp->b_io_length <= log->l_logBBsize);
-
-	bp->b_maps[0].bm_bn = log->l_logBBstart + bno;
-	bp->b_log_item = iclog;
-	bp->b_flags &= ~XBF_FLUSH;
-	bp->b_flags |= (XBF_ASYNC | XBF_SYNCIO | XBF_WRITE | XBF_FUA);
-	if (flush)
-		bp->b_flags |= XBF_FLUSH;
 
 	/*
 	 * We lock the iclogbufs here so that we can serialise against I/O
@@ -1786,11 +1772,10 @@ xlog_write_iclog(
 	 * tearing down the iclogbufs.  Hence we need to hold the buffer lock
 	 * across the log IO to archive that.
 	 */
-	xfs_buf_lock(bp);
+	down(&iclog->ic_sema);
 	if (unlikely(iclog->ic_state & XLOG_STATE_IOERROR)) {
-		xfs_buf_ioerror(bp, -EIO);
-		xfs_buf_stale(bp);
-		xfs_buf_ioend(bp);
+		xlog_state_done_syncing(iclog, XFS_LI_ABORTED);
+		up(&iclog->ic_sema);
 		/*
 		 * It would seem logical to return EIO here, but we rely on
 		 * the log state machine to propagate I/O errors instead of
@@ -1800,7 +1785,38 @@ xlog_write_iclog(
 		return;
 	}
 
-	xfs_buf_submit(bp);
+	iclog->ic_io_size = count;
+
+	bio_init(&iclog->ic_bio, iclog->ic_bvec, howmany(count, PAGE_SIZE));
+	bio_set_dev(&iclog->ic_bio, log->l_targ->bt_bdev);
+	iclog->ic_bio.bi_iter.bi_sector = log->l_logBBstart + bno;
+	iclog->ic_bio.bi_end_io = xlog_bio_end_io;
+	iclog->ic_bio.bi_private = iclog;
+	iclog->ic_bio.bi_opf = REQ_OP_WRITE | REQ_META | REQ_SYNC | REQ_FUA;
+	if (flush)
+		iclog->ic_bio.bi_opf |= REQ_PREFLUSH;
+
+	xlog_map_iclog_data(&iclog->ic_bio, iclog->ic_data, iclog->ic_io_size);
+	if (is_vmalloc_addr(iclog->ic_data))
+		flush_kernel_vmap_range(iclog->ic_data, iclog->ic_io_size);
+
+	/*
+	 * If this log buffer would straddle the end of the log we will have
+	 * to split it up into two bios, so that we can continue at the start.
+	 */
+	if (bno + BTOBB(count) > log->l_logBBsize) {
+		struct bio *split;
+
+		split = bio_split(&iclog->ic_bio, log->l_logBBsize - bno,
+				  GFP_NOIO, &fs_bio_set);
+		bio_chain(split, &iclog->ic_bio);
+		submit_bio(split);
+
+		/* restart at logical offset zero for the remainder */
+		iclog->ic_bio.bi_iter.bi_sector = log->l_logBBstart;
+	}
+
+	submit_bio(&iclog->ic_bio);
 }
 
 /*
@@ -1809,7 +1825,7 @@ xlog_write_iclog(
  *
  * Watch out for the header magic number case, though.
  */
-static unsigned int
+static void
 xlog_split_iclog(
 	struct xlog		*log,
 	void			*data,
@@ -1825,8 +1841,6 @@ xlog_split_iclog(
 			cycle++;
 		put_unaligned_be32(cycle, data + i);
 	}
-
-	return split_offset;
 }
 
 static int
@@ -1890,9 +1904,8 @@ xlog_sync(
 	unsigned int		count;		/* byte count of bwrite */
 	unsigned int		roundoff;       /* roundoff to BB or stripe */
 	uint64_t		bno;
-	unsigned int		split = 0;
 	unsigned int		size;
-	bool			flush = true;
+	bool			flush = true, split = false;
 
 	ASSERT(atomic_read(&iclog->ic_refcnt) == 0);
 
@@ -1917,8 +1930,10 @@ xlog_sync(
 	bno = BLOCK_LSN(be64_to_cpu(iclog->ic_header.h_lsn));
 
 	/* Do we need to split this write into 2 parts? */
-	if (bno + BTOBB(count) > log->l_logBBsize)
-		split = xlog_split_iclog(log, &iclog->ic_header, bno, count);
+	if (bno + BTOBB(count) > log->l_logBBsize) {
+		xlog_split_iclog(log, &iclog->ic_header, bno, count);
+		split = true;
+	}
 
 	/* calculcate the checksum */
 	iclog->ic_header.h_crc = xlog_cksum(log, &iclog->ic_header,
@@ -1951,18 +1966,8 @@ xlog_sync(
 		flush = false;
 	}
 
-	iclog->ic_bp->b_io_length = BTOBB(split ? split : count);
-	iclog->ic_bwritecnt = split ? 2 : 1;
-
 	xlog_verify_iclog(log, iclog, count);
-	xlog_write_iclog(log, iclog, iclog->ic_bp, bno, flush);
-
-	if (split) {
-		xfs_buf_associate_memory(iclog->ic_log->l_xbuf,
-				(char *)&iclog->ic_header + split,
-				count - split);
-		xlog_write_iclog(log, iclog, iclog->ic_log->l_xbuf, 0, false);
-	}
+	xlog_write_iclog(log, iclog, bno, count, flush);
 }
 
 /*
@@ -1983,25 +1988,15 @@ xlog_dealloc_log(
 	 */
 	iclog = log->l_iclog;
 	for (i = 0; i < log->l_iclog_bufs; i++) {
-		xfs_buf_lock(iclog->ic_bp);
-		xfs_buf_unlock(iclog->ic_bp);
+		down(&iclog->ic_sema);
+		up(&iclog->ic_sema);
 		iclog = iclog->ic_next;
 	}
 
-	/*
-	 * Always need to ensure that the extra buffer does not point to memory
-	 * owned by another log buffer before we free it. Also, cycle the lock
-	 * first to ensure we've completed IO on it.
-	 */
-	xfs_buf_lock(log->l_xbuf);
-	xfs_buf_unlock(log->l_xbuf);
-	xfs_buf_set_empty(log->l_xbuf, BTOBB(log->l_iclog_size));
-	xfs_buf_free(log->l_xbuf);
-
 	iclog = log->l_iclog;
 	for (i = 0; i < log->l_iclog_bufs; i++) {
-		xfs_buf_free(iclog->ic_bp);
 		next_iclog = iclog->ic_next;
+		kmem_free(iclog->ic_data);
 		kmem_free(iclog);
 		iclog = next_iclog;
 	}
@@ -2919,8 +2914,6 @@ xlog_state_done_syncing(
 	ASSERT(iclog->ic_state == XLOG_STATE_SYNCING ||
 	       iclog->ic_state == XLOG_STATE_IOERROR);
 	ASSERT(atomic_read(&iclog->ic_refcnt) == 0);
-	ASSERT(iclog->ic_bwritecnt == 1 || iclog->ic_bwritecnt == 2);
-
 
 	/*
 	 * If we got an error, either on the first buffer, or in the case of
@@ -2928,13 +2921,8 @@ xlog_state_done_syncing(
 	 * and none should ever be attempted to be written to disk
 	 * again.
 	 */
-	if (iclog->ic_state != XLOG_STATE_IOERROR) {
-		if (--iclog->ic_bwritecnt == 1) {
-			spin_unlock(&log->l_icloglock);
-			return;
-		}
+	if (iclog->ic_state != XLOG_STATE_IOERROR)
 		iclog->ic_state = XLOG_STATE_DONE_SYNC;
-	}
 
 	/*
 	 * Someone could be sleeping prior to writing out the next
diff --git a/fs/xfs/xfs_log_priv.h b/fs/xfs/xfs_log_priv.h
index b5f82cb36202..062ee9c13039 100644
--- a/fs/xfs/xfs_log_priv.h
+++ b/fs/xfs/xfs_log_priv.h
@@ -179,7 +179,6 @@ typedef struct xlog_ticket {
  *	the iclog.
  * - ic_forcewait is used to implement synchronous forcing of the iclog to disk.
  * - ic_next is the pointer to the next iclog in the ring.
- * - ic_bp is a pointer to the buffer used to write this incore log to disk.
  * - ic_log is a pointer back to the global log structure.
  * - ic_callback is a linked list of callback function/argument pairs to be
  *	called after an iclog finishes writing.
@@ -206,11 +205,10 @@ typedef struct xlog_in_core {
 	wait_queue_head_t	ic_write_wait;
 	struct xlog_in_core	*ic_next;
 	struct xlog_in_core	*ic_prev;
-	struct xfs_buf		*ic_bp;
 	struct xlog		*ic_log;
-	int			ic_size;
-	int			ic_offset;
-	int			ic_bwritecnt;
+	u32			ic_size;
+	u32			ic_io_size;
+	u32			ic_offset;
 	unsigned short		ic_state;
 	char			*ic_datap;	/* pointer to iclog data */
 
@@ -223,6 +221,11 @@ typedef struct xlog_in_core {
 	atomic_t		ic_refcnt ____cacheline_aligned_in_smp;
 	xlog_in_core_2_t	*ic_data;
 #define ic_header	ic_data->hic_header
+
+	struct semaphore	ic_sema;
+	struct work_struct	ic_end_io_work;
+	struct bio		ic_bio;
+	struct bio_vec		ic_bvec[];
 } xlog_in_core_t;
 
 /*
@@ -350,8 +353,6 @@ struct xlog {
 	struct xfs_mount	*l_mp;	        /* mount point */
 	struct xfs_ail		*l_ailp;	/* AIL log is working with */
 	struct xfs_cil		*l_cilp;	/* CIL log is working with */
-	struct xfs_buf		*l_xbuf;        /* extra buffer for log
-						 * wrapping */
 	struct xfs_buftarg	*l_targ;        /* buftarg of log */
 	struct delayed_work	l_work;		/* background flush work */
 	uint			l_flags;
-- 
2.20.1

[PATCH 14/20] xfs: move the log ioend workqueue to struct xlog

[Christoph Hellwig]

Move the workqueue used for log I/O completions from struct xfs_mount
to struct xlog to keep it self contained in the log code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/xfs_log.c      | 13 +++++++++++--
 fs/xfs/xfs_log_priv.h |  1 +
 fs/xfs/xfs_mount.h    |  1 -
 fs/xfs/xfs_super.c    | 11 +----------
 4 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 6ae51e0067f8..047cc0237352 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -1531,11 +1531,19 @@ xlog_alloc_log(
 	*iclogp = log->l_iclog;			/* complete ring */
 	log->l_iclog->ic_prev = prev_iclog;	/* re-write 1st prev ptr */
 
+	log->l_ioend_workqueue = alloc_workqueue("xfs-log/%s",
+			WQ_MEM_RECLAIM | WQ_FREEZABLE | WQ_HIGHPRI, 0,
+			mp->m_fsname);
+	if (!log->l_ioend_workqueue)
+		goto out_free_iclog;
+
 	error = xlog_cil_init(log);
 	if (error)
-		goto out_free_iclog;
+		goto out_destroy_workqueue;
 	return log;
 
+out_destroy_workqueue:
+	destroy_workqueue(log->l_ioend_workqueue);
 out_free_iclog:
 	for (iclog = log->l_iclog; iclog; iclog = prev_iclog) {
 		prev_iclog = iclog->ic_next;
@@ -1732,7 +1740,7 @@ xlog_bio_end_io(
 {
 	struct xlog_in_core	*iclog = bio->bi_private;
 
-	queue_work(iclog->ic_log->l_mp->m_log_workqueue,
+	queue_work(iclog->ic_log->l_ioend_workqueue,
 		   &iclog->ic_end_io_work);
 }
 
@@ -1981,6 +1989,7 @@ xlog_dealloc_log(
 	int		i;
 
 	xlog_cil_destroy(log);
+	destroy_workqueue(log->l_ioend_workqueue);
 
 	/*
 	 * Cycle all the iclogbuf locks to make sure all log IO completion
diff --git a/fs/xfs/xfs_log_priv.h b/fs/xfs/xfs_log_priv.h
index 062ee9c13039..e8acd4818539 100644
--- a/fs/xfs/xfs_log_priv.h
+++ b/fs/xfs/xfs_log_priv.h
@@ -354,6 +354,7 @@ struct xlog {
 	struct xfs_ail		*l_ailp;	/* AIL log is working with */
 	struct xfs_cil		*l_cilp;	/* CIL log is working with */
 	struct xfs_buftarg	*l_targ;        /* buftarg of log */
+	struct workqueue_struct	*l_ioend_workqueue; /* for I/O completions */
 	struct delayed_work	l_work;		/* background flush work */
 	uint			l_flags;
 	uint			l_quotaoffs_flag; /* XFS_DQ_*, for QUOTAOFFs */
diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h
index c81a5cd7c228..8d188155dca3 100644
--- a/fs/xfs/xfs_mount.h
+++ b/fs/xfs/xfs_mount.h
@@ -198,7 +198,6 @@ typedef struct xfs_mount {
 	struct workqueue_struct	*m_unwritten_workqueue;
 	struct workqueue_struct	*m_cil_workqueue;
 	struct workqueue_struct	*m_reclaim_workqueue;
-	struct workqueue_struct	*m_log_workqueue;
 	struct workqueue_struct *m_eofblocks_workqueue;
 	struct workqueue_struct	*m_sync_workqueue;
 
diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c
index a14d11d78bd8..7cb0d2a01c41 100644
--- a/fs/xfs/xfs_super.c
+++ b/fs/xfs/xfs_super.c
@@ -840,16 +840,10 @@ xfs_init_mount_workqueues(
 	if (!mp->m_reclaim_workqueue)
 		goto out_destroy_cil;
 
-	mp->m_log_workqueue = alloc_workqueue("xfs-log/%s",
-			WQ_MEM_RECLAIM|WQ_FREEZABLE|WQ_HIGHPRI, 0,
-			mp->m_fsname);
-	if (!mp->m_log_workqueue)
-		goto out_destroy_reclaim;
-
 	mp->m_eofblocks_workqueue = alloc_workqueue("xfs-eofblocks/%s",
 			WQ_MEM_RECLAIM|WQ_FREEZABLE, 0, mp->m_fsname);
 	if (!mp->m_eofblocks_workqueue)
-		goto out_destroy_log;
+		goto out_destroy_reclaim;
 
 	mp->m_sync_workqueue = alloc_workqueue("xfs-sync/%s", WQ_FREEZABLE, 0,
 					       mp->m_fsname);
@@ -860,8 +854,6 @@ xfs_init_mount_workqueues(
 
 out_destroy_eofb:
 	destroy_workqueue(mp->m_eofblocks_workqueue);
-out_destroy_log:
-	destroy_workqueue(mp->m_log_workqueue);
 out_destroy_reclaim:
 	destroy_workqueue(mp->m_reclaim_workqueue);
 out_destroy_cil:
@@ -880,7 +872,6 @@ xfs_destroy_mount_workqueues(
 {
 	destroy_workqueue(mp->m_sync_workqueue);
 	destroy_workqueue(mp->m_eofblocks_workqueue);
-	destroy_workqueue(mp->m_log_workqueue);
 	destroy_workqueue(mp->m_reclaim_workqueue);
 	destroy_workqueue(mp->m_cil_workqueue);
 	destroy_workqueue(mp->m_unwritten_workqueue);
-- 
2.20.1

[PATCH 15/20] xfs: return an offset instead of a pointer from xlog_align

[Christoph Hellwig]

This simplifies both the helper and the callers.  We lost a bit of
size sanity checking, but that is already covered by KASAN if needed.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/xfs_log_recover.c | 16 +++++-----------
 1 file changed, 5 insertions(+), 11 deletions(-)

diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index 4139b907e9cd..74fd3784bcb7 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -151,20 +151,14 @@ xlog_put_bp(
  * Return the address of the start of the given block number's data
  * in a log buffer.  The buffer covers a log sector-aligned region.
  */
-STATIC char *
+static inline unsigned int
 xlog_align(
 	struct xlog	*log,
-	xfs_daddr_t	blk_no,
-	int		nbblks,
-	struct xfs_buf	*bp)
+	xfs_daddr_t	blk_no)
 {
-	xfs_daddr_t	offset = blk_no & ((xfs_daddr_t)log->l_sectBBsize - 1);
-
-	ASSERT(offset + nbblks <= bp->b_length);
-	return bp->b_addr + BBTOB(offset);
+	return BBTOB(blk_no & ((xfs_daddr_t)log->l_sectBBsize - 1));
 }
 
-
 /*
  * nbblks should be uint, but oh well.  Just want to catch that 32-bit length.
  */
@@ -216,7 +210,7 @@ xlog_bread(
 	if (error)
 		return error;
 
-	*offset = xlog_align(log, blk_no, nbblks, bp);
+	*offset = bp->b_addr + xlog_align(log, blk_no);
 	return 0;
 }
 
@@ -1713,7 +1707,7 @@ xlog_write_log_records(
 
 		}
 
-		offset = xlog_align(log, start_block, endcount, bp);
+		offset = bp->b_addr + xlog_align(log, start_block);
 		for (; j < endcount; j++) {
 			xlog_add_record(log, offset, cycle, i+j,
 					tail_cycle, tail_block);
-- 
2.20.1

[PATCH 16/20] xfs: use bios directly to read and write the log recovery buffers

[Christoph Hellwig]

The xfs_buf structure is basically used as a glorified container for
a memory allocation in the log recovery code.  Replace it with a
call to kmem_alloc_large and a simple abstraction to read into or
write from it synchronously using chained bios.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/Makefile          |   1 +
 fs/xfs/xfs_bio_io.c      |  61 ++++++++++
 fs/xfs/xfs_linux.h       |   3 +
 fs/xfs/xfs_log_recover.c | 241 ++++++++++++++-------------------------
 4 files changed, 149 insertions(+), 157 deletions(-)
 create mode 100644 fs/xfs/xfs_bio_io.c

diff --git a/fs/xfs/Makefile b/fs/xfs/Makefile
index 91831975363b..701028e3e4ac 100644
--- a/fs/xfs/Makefile
+++ b/fs/xfs/Makefile
@@ -62,6 +62,7 @@ xfs-y				+= xfs_aops.o \
 				   xfs_attr_inactive.o \
 				   xfs_attr_list.o \
 				   xfs_bmap_util.o \
+				   xfs_bio_io.o \
 				   xfs_buf.o \
 				   xfs_dir2_readdir.o \
 				   xfs_discard.o \
diff --git a/fs/xfs/xfs_bio_io.c b/fs/xfs/xfs_bio_io.c
new file mode 100644
index 000000000000..d251850c6bf6
--- /dev/null
+++ b/fs/xfs/xfs_bio_io.c
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 Christoph Hellwig.
+ */
+#include "xfs.h"
+
+static inline unsigned int bio_max_vecs(unsigned int count)
+{
+	return min_t(unsigned, howmany(count, PAGE_SIZE), BIO_MAX_PAGES);
+}
+
+int
+xfs_rw_bdev(
+	struct block_device	*bdev,
+	sector_t		sector,
+	unsigned int		count,
+	char			*data,
+	unsigned int		op)
+
+{
+	unsigned int		is_vmalloc = is_vmalloc_addr(data);
+	unsigned int		left = count;
+	int			error;
+	struct bio		*bio;
+
+	if (is_vmalloc && op == REQ_OP_READ)
+		flush_kernel_vmap_range(data, count);
+
+	bio = bio_alloc(GFP_KERNEL, bio_max_vecs(left));
+	bio_set_dev(bio, bdev);
+	bio->bi_iter.bi_sector = sector;
+	bio->bi_opf = op | REQ_META | REQ_SYNC;
+
+	do {
+		struct page	*page = kmem_to_page(data);
+		unsigned int	off = offset_in_page(data);
+		unsigned int	len = min_t(unsigned, left, PAGE_SIZE - off);
+
+		while (bio_add_page(bio, page, len, off) != len) {
+			struct bio	*prev = bio;
+
+			bio = bio_alloc(GFP_KERNEL, bio_max_vecs(left));
+			bio_copy_dev(bio, prev);
+			bio->bi_iter.bi_sector = bio_end_sector(prev);
+			bio->bi_opf = prev->bi_opf;
+			bio_chain(bio, prev);
+
+			submit_bio(prev);
+		}
+
+		data += len;
+		left -= len;
+	} while (left > 0);
+
+	error = submit_bio_wait(bio);
+	bio_put(bio);
+
+	if (is_vmalloc && op == REQ_OP_WRITE)
+		invalidate_kernel_vmap_range(data, count);
+	return error;
+}
diff --git a/fs/xfs/xfs_linux.h b/fs/xfs/xfs_linux.h
index b78287666309..ca15105681ca 100644
--- a/fs/xfs/xfs_linux.h
+++ b/fs/xfs/xfs_linux.h
@@ -219,6 +219,9 @@ static inline uint64_t howmany_64(uint64_t x, uint32_t y)
 	return x;
 }
 
+int xfs_rw_bdev(struct block_device *bdev, sector_t sector, unsigned int count,
+		char *data, unsigned int op);
+
 #define ASSERT_ALWAYS(expr)	\
 	(likely(expr) ? (void)0 : assfail(#expr, __FILE__, __LINE__))
 
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index 74fd3784bcb7..a28c9dc8f1f2 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -92,17 +92,14 @@ xlog_verify_bp(
 }
 
 /*
- * Allocate a buffer to hold log data.  The buffer needs to be able
- * to map to a range of nbblks basic blocks at any valid (basic
- * block) offset within the log.
+ * Allocate a buffer to hold log data.  The buffer needs to be able to map to
+ * a range of nbblks basic blocks at any valid offset within the log.
  */
-STATIC xfs_buf_t *
+static char *
 xlog_get_bp(
 	struct xlog	*log,
 	int		nbblks)
 {
-	struct xfs_buf	*bp;
-
 	/*
 	 * Pass log block 0 since we don't have an addr yet, buffer will be
 	 * verified on read.
@@ -115,36 +112,23 @@ xlog_get_bp(
 	}
 
 	/*
-	 * We do log I/O in units of log sectors (a power-of-2
-	 * multiple of the basic block size), so we round up the
-	 * requested size to accommodate the basic blocks required
-	 * for complete log sectors.
+	 * We do log I/O in units of log sectors (a power-of-2 multiple of the
+	 * basic block size), so we round up the requested size to accommodate
+	 * the basic blocks required for complete log sectors.
 	 *
-	 * In addition, the buffer may be used for a non-sector-
-	 * aligned block offset, in which case an I/O of the
-	 * requested size could extend beyond the end of the
-	 * buffer.  If the requested size is only 1 basic block it
-	 * will never straddle a sector boundary, so this won't be
-	 * an issue.  Nor will this be a problem if the log I/O is
-	 * done in basic blocks (sector size 1).  But otherwise we
-	 * extend the buffer by one extra log sector to ensure
-	 * there's space to accommodate this possibility.
+	 * In addition, the buffer may be used for a non-sector-aligned block
+	 * offset, in which case an I/O of the requested size could extend
+	 * beyond the end of the buffer.  If the requested size is only 1 basic
+	 * block it will never straddle a sector boundary, so this won't be an
+	 * issue.  Nor will this be a problem if the log I/O is done in basic
+	 * blocks (sector size 1).  But otherwise we extend the buffer by one
+	 * extra log sector to ensure there's space to accommodate this
+	 * possibility.
 	 */
 	if (nbblks > 1 && log->l_sectBBsize > 1)
 		nbblks += log->l_sectBBsize;
 	nbblks = round_up(nbblks, log->l_sectBBsize);
-
-	bp = xfs_buf_get_uncached(log->l_targ, nbblks, 0);
-	if (bp)
-		xfs_buf_unlock(bp);
-	return bp;
-}
-
-STATIC void
-xlog_put_bp(
-	xfs_buf_t	*bp)
-{
-	xfs_buf_free(bp);
+	return kmem_alloc_large(BBTOB(nbblks), KM_MAYFAIL);
 }
 
 /*
@@ -159,17 +143,15 @@ xlog_align(
 	return BBTOB(blk_no & ((xfs_daddr_t)log->l_sectBBsize - 1));
 }
 
-/*
- * nbblks should be uint, but oh well.  Just want to catch that 32-bit length.
- */
-STATIC int
-xlog_bread_noalign(
-	struct xlog	*log,
-	xfs_daddr_t	blk_no,
-	int		nbblks,
-	struct xfs_buf	*bp)
+static int
+xlog_do_io(
+	struct xlog		*log,
+	xfs_daddr_t		blk_no,
+	unsigned int		nbblks,
+	char			*data,
+	unsigned int		op)
 {
-	int		error;
+	int			error;
 
 	if (!xlog_verify_bp(log, blk_no, nbblks)) {
 		xfs_warn(log->l_mp,
@@ -181,107 +163,53 @@ xlog_bread_noalign(
 
 	blk_no = round_down(blk_no, log->l_sectBBsize);
 	nbblks = round_up(nbblks, log->l_sectBBsize);
-
 	ASSERT(nbblks > 0);
-	ASSERT(nbblks <= bp->b_length);
-
-	XFS_BUF_SET_ADDR(bp, log->l_logBBstart + blk_no);
-	bp->b_flags |= XBF_READ;
-	bp->b_io_length = nbblks;
-	bp->b_error = 0;
 
-	error = xfs_buf_submit(bp);
-	if (error && !XFS_FORCED_SHUTDOWN(log->l_mp))
-		xfs_buf_ioerror_alert(bp, __func__);
+	error = xfs_rw_bdev(log->l_targ->bt_bdev, log->l_logBBstart + blk_no,
+			BBTOB(nbblks), data, op);
+	if (error && !XFS_FORCED_SHUTDOWN(log->l_mp)) {
+		xfs_alert(log->l_mp,
+			  "log recovery %s I/O error at daddr 0x%llx len %d error %d",
+			  op == REQ_OP_WRITE ? "write" : "read",
+			  blk_no, nbblks, error);
+	}
 	return error;
 }
 
 STATIC int
-xlog_bread(
+xlog_bread_noalign(
 	struct xlog	*log,
 	xfs_daddr_t	blk_no,
 	int		nbblks,
-	struct xfs_buf	*bp,
-	char		**offset)
+	char		*data)
 {
-	int		error;
-
-	error = xlog_bread_noalign(log, blk_no, nbblks, bp);
-	if (error)
-		return error;
-
-	*offset = bp->b_addr + xlog_align(log, blk_no);
-	return 0;
+	return xlog_do_io(log, blk_no, nbblks, data, REQ_OP_READ);
 }
 
-/*
- * Read at an offset into the buffer. Returns with the buffer in it's original
- * state regardless of the result of the read.
- */
 STATIC int
-xlog_bread_offset(
+xlog_bread(
 	struct xlog	*log,
-	xfs_daddr_t	blk_no,		/* block to read from */
-	int		nbblks,		/* blocks to read */
-	struct xfs_buf	*bp,
-	char		*offset)
+	xfs_daddr_t	blk_no,
+	int		nbblks,
+	char		*data,
+	char		**offset)
 {
-	char		*orig_offset = bp->b_addr;
-	int		orig_len = BBTOB(bp->b_length);
-	int		error, error2;
-
-	error = xfs_buf_associate_memory(bp, offset, BBTOB(nbblks));
-	if (error)
-		return error;
-
-	error = xlog_bread_noalign(log, blk_no, nbblks, bp);
+	int		error;
 
-	/* must reset buffer pointer even on error */
-	error2 = xfs_buf_associate_memory(bp, orig_offset, orig_len);
-	if (error)
-		return error;
-	return error2;
+	error = xlog_do_io(log, blk_no, nbblks, data, REQ_OP_READ);
+	if (!error)
+		*offset = data + xlog_align(log, blk_no);
+	return error;
 }
 
-/*
- * Write out the buffer at the given block for the given number of blocks.
- * The buffer is kept locked across the write and is returned locked.
- * This can only be used for synchronous log writes.
- */
 STATIC int
 xlog_bwrite(
 	struct xlog	*log,
 	xfs_daddr_t	blk_no,
 	int		nbblks,
-	struct xfs_buf	*bp)
+	char		*data)
 {
-	int		error;
-
-	if (!xlog_verify_bp(log, blk_no, nbblks)) {
-		xfs_warn(log->l_mp,
-			 "Invalid log block/length (0x%llx, 0x%x) for buffer",
-			 blk_no, nbblks);
-		XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_HIGH, log->l_mp);
-		return -EFSCORRUPTED;
-	}
-
-	blk_no = round_down(blk_no, log->l_sectBBsize);
-	nbblks = round_up(nbblks, log->l_sectBBsize);
-
-	ASSERT(nbblks > 0);
-	ASSERT(nbblks <= bp->b_length);
-
-	XFS_BUF_SET_ADDR(bp, log->l_logBBstart + blk_no);
-	xfs_buf_hold(bp);
-	xfs_buf_lock(bp);
-	bp->b_io_length = nbblks;
-	bp->b_error = 0;
-
-	error = xfs_bwrite(bp);
-	if (error)
-		xfs_buf_ioerror_alert(bp, __func__);
-	xfs_buf_relse(bp);
-	return error;
+	return xlog_do_io(log, blk_no, nbblks, data, REQ_OP_WRITE);
 }
 
 #ifdef DEBUG
@@ -399,7 +327,7 @@ xlog_recover_iodone(
 STATIC int
 xlog_find_cycle_start(
 	struct xlog	*log,
-	struct xfs_buf	*bp,
+	char		*bp,
 	xfs_daddr_t	first_blk,
 	xfs_daddr_t	*last_blk,
 	uint		cycle)
@@ -449,7 +377,7 @@ xlog_find_verify_cycle(
 {
 	xfs_daddr_t	i, j;
 	uint		cycle;
-	xfs_buf_t	*bp;
+	char		*bp;
 	xfs_daddr_t	bufblks;
 	char		*buf = NULL;
 	int		error = 0;
@@ -492,7 +420,7 @@ xlog_find_verify_cycle(
 	*new_blk = -1;
 
 out:
-	xlog_put_bp(bp);
+	kmem_free(bp);
 	return error;
 }
 
@@ -516,7 +444,7 @@ xlog_find_verify_log_record(
 	int			extra_bblks)
 {
 	xfs_daddr_t		i;
-	xfs_buf_t		*bp;
+	char			*bp;
 	char			*offset = NULL;
 	xlog_rec_header_t	*head = NULL;
 	int			error = 0;
@@ -601,7 +529,7 @@ xlog_find_verify_log_record(
 		*last_blk = i;
 
 out:
-	xlog_put_bp(bp);
+	kmem_free(bp);
 	return error;
 }
 
@@ -623,7 +551,7 @@ xlog_find_head(
 	struct xlog	*log,
 	xfs_daddr_t	*return_head_blk)
 {
-	xfs_buf_t	*bp;
+	char		*bp;
 	char		*offset;
 	xfs_daddr_t	new_blk, first_blk, start_blk, last_blk, head_blk;
 	int		num_scan_bblks;
@@ -854,7 +782,7 @@ xlog_find_head(
 			goto bp_err;
 	}
 
-	xlog_put_bp(bp);
+	kmem_free(bp);
 	if (head_blk == log_bbnum)
 		*return_head_blk = 0;
 	else
@@ -868,7 +796,7 @@ xlog_find_head(
 	return 0;
 
  bp_err:
-	xlog_put_bp(bp);
+	kmem_free(bp);
 
 	if (error)
 		xfs_warn(log->l_mp, "failed to find log head");
@@ -889,7 +817,7 @@ xlog_rseek_logrec_hdr(
 	xfs_daddr_t		head_blk,
 	xfs_daddr_t		tail_blk,
 	int			count,
-	struct xfs_buf		*bp,
+	char			*bp,
 	xfs_daddr_t		*rblk,
 	struct xlog_rec_header	**rhead,
 	bool			*wrapped)
@@ -963,7 +891,7 @@ xlog_seek_logrec_hdr(
 	xfs_daddr_t		head_blk,
 	xfs_daddr_t		tail_blk,
 	int			count,
-	struct xfs_buf		*bp,
+	char			*bp,
 	xfs_daddr_t		*rblk,
 	struct xlog_rec_header	**rhead,
 	bool			*wrapped)
@@ -1063,7 +991,7 @@ xlog_verify_tail(
 	int			hsize)
 {
 	struct xlog_rec_header	*thead;
-	struct xfs_buf		*bp;
+	char			*bp;
 	xfs_daddr_t		first_bad;
 	int			error = 0;
 	bool			wrapped;
@@ -1123,7 +1051,7 @@ xlog_verify_tail(
 		"Tail block (0x%llx) overwrite detected. Updated to 0x%llx",
 			 orig_tail, *tail_blk);
 out:
-	xlog_put_bp(bp);
+	kmem_free(bp);
 	return error;
 }
 
@@ -1145,13 +1073,13 @@ xlog_verify_head(
 	struct xlog		*log,
 	xfs_daddr_t		*head_blk,	/* in/out: unverified head */
 	xfs_daddr_t		*tail_blk,	/* out: tail block */
-	struct xfs_buf		*bp,
+	char			*bp,
 	xfs_daddr_t		*rhead_blk,	/* start blk of last record */
 	struct xlog_rec_header	**rhead,	/* ptr to last record */
 	bool			*wrapped)	/* last rec. wraps phys. log */
 {
 	struct xlog_rec_header	*tmp_rhead;
-	struct xfs_buf		*tmp_bp;
+	char			*tmp_bp;
 	xfs_daddr_t		first_bad;
 	xfs_daddr_t		tmp_rhead_blk;
 	int			found;
@@ -1170,7 +1098,7 @@ xlog_verify_head(
 	error = xlog_rseek_logrec_hdr(log, *head_blk, *tail_blk,
 				      XLOG_MAX_ICLOGS, tmp_bp, &tmp_rhead_blk,
 				      &tmp_rhead, &tmp_wrapped);
-	xlog_put_bp(tmp_bp);
+	kmem_free(tmp_bp);
 	if (error < 0)
 		return error;
 
@@ -1260,7 +1188,7 @@ xlog_check_unmount_rec(
 	xfs_daddr_t		*tail_blk,
 	struct xlog_rec_header	*rhead,
 	xfs_daddr_t		rhead_blk,
-	struct xfs_buf		*bp,
+	char			*bp,
 	bool			*clean)
 {
 	struct xlog_op_header	*op_head;
@@ -1382,7 +1310,7 @@ xlog_find_tail(
 {
 	xlog_rec_header_t	*rhead;
 	char			*offset = NULL;
-	xfs_buf_t		*bp;
+	char			*bp;
 	int			error;
 	xfs_daddr_t		rhead_blk;
 	xfs_lsn_t		tail_lsn;
@@ -1503,7 +1431,7 @@ xlog_find_tail(
 		error = xlog_clear_stale_blocks(log, tail_lsn);
 
 done:
-	xlog_put_bp(bp);
+	kmem_free(bp);
 
 	if (error)
 		xfs_warn(log->l_mp, "failed to locate log tail");
@@ -1531,7 +1459,7 @@ xlog_find_zeroed(
 	struct xlog	*log,
 	xfs_daddr_t	*blk_no)
 {
-	xfs_buf_t	*bp;
+	char		*bp;
 	char		*offset;
 	uint	        first_cycle, last_cycle;
 	xfs_daddr_t	new_blk, last_blk, start_blk;
@@ -1551,7 +1479,7 @@ xlog_find_zeroed(
 	first_cycle = xlog_get_cycle(offset);
 	if (first_cycle == 0) {		/* completely zeroed log */
 		*blk_no = 0;
-		xlog_put_bp(bp);
+		kmem_free(bp);
 		return 1;
 	}
 
@@ -1562,7 +1490,7 @@ xlog_find_zeroed(
 
 	last_cycle = xlog_get_cycle(offset);
 	if (last_cycle != 0) {		/* log completely written to */
-		xlog_put_bp(bp);
+		kmem_free(bp);
 		return 0;
 	}
 
@@ -1608,7 +1536,7 @@ xlog_find_zeroed(
 
 	*blk_no = last_blk;
 bp_err:
-	xlog_put_bp(bp);
+	kmem_free(bp);
 	if (error)
 		return error;
 	return 1;
@@ -1651,7 +1579,7 @@ xlog_write_log_records(
 	int		tail_block)
 {
 	char		*offset;
-	xfs_buf_t	*bp;
+	char		*bp;
 	int		balign, ealign;
 	int		sectbb = log->l_sectBBsize;
 	int		end_block = start_block + blocks;
@@ -1699,15 +1627,14 @@ xlog_write_log_records(
 		 */
 		ealign = round_down(end_block, sectbb);
 		if (j == 0 && (start_block + endcount > ealign)) {
-			offset = bp->b_addr + BBTOB(ealign - start_block);
-			error = xlog_bread_offset(log, ealign, sectbb,
-							bp, offset);
+			error = xlog_bread_noalign(log, ealign, sectbb,
+					bp + BBTOB(ealign - start_block));
 			if (error)
 				break;
 
 		}
 
-		offset = bp->b_addr + xlog_align(log, start_block);
+		offset = bp + xlog_align(log, start_block);
 		for (; j < endcount; j++) {
 			xlog_add_record(log, offset, cycle, i+j,
 					tail_cycle, tail_block);
@@ -1721,7 +1648,7 @@ xlog_write_log_records(
 	}
 
  out_put_bp:
-	xlog_put_bp(bp);
+	kmem_free(bp);
 	return error;
 }
 
@@ -5301,7 +5228,7 @@ xlog_do_recovery_pass(
 	xfs_daddr_t		blk_no, rblk_no;
 	xfs_daddr_t		rhead_blk;
 	char			*offset;
-	xfs_buf_t		*hbp, *dbp;
+	char			*hbp, *dbp;
 	int			error = 0, h_size, h_len;
 	int			error2 = 0;
 	int			bblks, split_bblks;
@@ -5368,7 +5295,7 @@ xlog_do_recovery_pass(
 			hblks = h_size / XLOG_HEADER_CYCLE_SIZE;
 			if (h_size % XLOG_HEADER_CYCLE_SIZE)
 				hblks++;
-			xlog_put_bp(hbp);
+			kmem_free(hbp);
 			hbp = xlog_get_bp(log, hblks);
 		} else {
 			hblks = 1;
@@ -5384,7 +5311,7 @@ xlog_do_recovery_pass(
 		return -ENOMEM;
 	dbp = xlog_get_bp(log, BTOBB(h_size));
 	if (!dbp) {
-		xlog_put_bp(hbp);
+		kmem_free(hbp);
 		return -ENOMEM;
 	}
 
@@ -5399,7 +5326,7 @@ xlog_do_recovery_pass(
 			/*
 			 * Check for header wrapping around physical end-of-log
 			 */
-			offset = hbp->b_addr;
+			offset = hbp;
 			split_hblks = 0;
 			wrapped_hblks = 0;
 			if (blk_no + hblks <= log->l_logBBsize) {
@@ -5435,8 +5362,8 @@ xlog_do_recovery_pass(
 				 *   - order is important.
 				 */
 				wrapped_hblks = hblks - split_hblks;
-				error = xlog_bread_offset(log, 0,
-						wrapped_hblks, hbp,
+				error = xlog_bread_noalign(log, 0,
+						wrapped_hblks,
 						offset + BBTOB(split_hblks));
 				if (error)
 					goto bread_err2;
@@ -5467,7 +5394,7 @@ xlog_do_recovery_pass(
 			} else {
 				/* This log record is split across the
 				 * physical end of log */
-				offset = dbp->b_addr;
+				offset = dbp;
 				split_bblks = 0;
 				if (blk_no != log->l_logBBsize) {
 					/* some data is before the physical
@@ -5496,8 +5423,8 @@ xlog_do_recovery_pass(
 				 *   _first_, then the log start (LR header end)
 				 *   - order is important.
 				 */
-				error = xlog_bread_offset(log, 0,
-						bblks - split_bblks, dbp,
+				error = xlog_bread_noalign(log, 0,
+						bblks - split_bblks,
 						offset + BBTOB(split_bblks));
 				if (error)
 					goto bread_err2;
@@ -5545,9 +5472,9 @@ xlog_do_recovery_pass(
 	}
 
  bread_err2:
-	xlog_put_bp(dbp);
+	kmem_free(dbp);
  bread_err1:
-	xlog_put_bp(hbp);
+	kmem_free(hbp);
 
 	/*
 	 * Submit buffers that have been added from the last record processed,
-- 
2.20.1

[PATCH 17/20] xfs: stop using bp naming for log recovery buffers

[Christoph Hellwig]

Now that we don't use struct xfs_buf to hold log recovery buffer rename
the related functions and variables to just talk of a buffer instead of
using the bp name that we usually use for xfs_buf related functionality.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/xfs_log_recover.c | 201 ++++++++++++++++++++-------------------
 1 file changed, 102 insertions(+), 99 deletions(-)

diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index a28c9dc8f1f2..403c2c96ed71 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -79,7 +79,7 @@ struct xfs_buf_cancel {
  * are valid, false otherwise.
  */
 static inline bool
-xlog_verify_bp(
+xlog_verify_bno(
 	struct xlog	*log,
 	xfs_daddr_t	blk_no,
 	int		bbcount)
@@ -96,7 +96,7 @@ xlog_verify_bp(
  * a range of nbblks basic blocks at any valid offset within the log.
  */
 static char *
-xlog_get_bp(
+xlog_alloc_buffer(
 	struct xlog	*log,
 	int		nbblks)
 {
@@ -104,7 +104,7 @@ xlog_get_bp(
 	 * Pass log block 0 since we don't have an addr yet, buffer will be
 	 * verified on read.
 	 */
-	if (!xlog_verify_bp(log, 0, nbblks)) {
+	if (!xlog_verify_bno(log, 0, nbblks)) {
 		xfs_warn(log->l_mp, "Invalid block length (0x%x) for buffer",
 			nbblks);
 		XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_HIGH, log->l_mp);
@@ -153,7 +153,7 @@ xlog_do_io(
 {
 	int			error;
 
-	if (!xlog_verify_bp(log, blk_no, nbblks)) {
+	if (!xlog_verify_bno(log, blk_no, nbblks)) {
 		xfs_warn(log->l_mp,
 			 "Invalid log block/length (0x%llx, 0x%x) for buffer",
 			 blk_no, nbblks);
@@ -327,7 +327,7 @@ xlog_recover_iodone(
 STATIC int
 xlog_find_cycle_start(
 	struct xlog	*log,
-	char		*bp,
+	char		*buffer,
 	xfs_daddr_t	first_blk,
 	xfs_daddr_t	*last_blk,
 	uint		cycle)
@@ -341,7 +341,7 @@ xlog_find_cycle_start(
 	end_blk = *last_blk;
 	mid_blk = BLK_AVG(first_blk, end_blk);
 	while (mid_blk != first_blk && mid_blk != end_blk) {
-		error = xlog_bread(log, mid_blk, 1, bp, &offset);
+		error = xlog_bread(log, mid_blk, 1, buffer, &offset);
 		if (error)
 			return error;
 		mid_cycle = xlog_get_cycle(offset);
@@ -377,7 +377,7 @@ xlog_find_verify_cycle(
 {
 	xfs_daddr_t	i, j;
 	uint		cycle;
-	char		*bp;
+	char		*buffer;
 	xfs_daddr_t	bufblks;
 	char		*buf = NULL;
 	int		error = 0;
@@ -391,7 +391,7 @@ xlog_find_verify_cycle(
 	bufblks = 1 << ffs(nbblks);
 	while (bufblks > log->l_logBBsize)
 		bufblks >>= 1;
-	while (!(bp = xlog_get_bp(log, bufblks))) {
+	while (!(buffer = xlog_alloc_buffer(log, bufblks))) {
 		bufblks >>= 1;
 		if (bufblks < log->l_sectBBsize)
 			return -ENOMEM;
@@ -402,7 +402,7 @@ xlog_find_verify_cycle(
 
 		bcount = min(bufblks, (start_blk + nbblks - i));
 
-		error = xlog_bread(log, i, bcount, bp, &buf);
+		error = xlog_bread(log, i, bcount, buffer, &buf);
 		if (error)
 			goto out;
 
@@ -420,7 +420,7 @@ xlog_find_verify_cycle(
 	*new_blk = -1;
 
 out:
-	kmem_free(bp);
+	kmem_free(buffer);
 	return error;
 }
 
@@ -444,7 +444,7 @@ xlog_find_verify_log_record(
 	int			extra_bblks)
 {
 	xfs_daddr_t		i;
-	char			*bp;
+	char			*buffer;
 	char			*offset = NULL;
 	xlog_rec_header_t	*head = NULL;
 	int			error = 0;
@@ -454,12 +454,14 @@ xlog_find_verify_log_record(
 
 	ASSERT(start_blk != 0 || *last_blk != start_blk);
 
-	if (!(bp = xlog_get_bp(log, num_blks))) {
-		if (!(bp = xlog_get_bp(log, 1)))
+	buffer = xlog_alloc_buffer(log, num_blks);
+	if (!buffer) {
+		buffer = xlog_alloc_buffer(log, 1);
+		if (!buffer)
 			return -ENOMEM;
 		smallmem = 1;
 	} else {
-		error = xlog_bread(log, start_blk, num_blks, bp, &offset);
+		error = xlog_bread(log, start_blk, num_blks, buffer, &offset);
 		if (error)
 			goto out;
 		offset += ((num_blks - 1) << BBSHIFT);
@@ -476,7 +478,7 @@ xlog_find_verify_log_record(
 		}
 
 		if (smallmem) {
-			error = xlog_bread(log, i, 1, bp, &offset);
+			error = xlog_bread(log, i, 1, buffer, &offset);
 			if (error)
 				goto out;
 		}
@@ -529,7 +531,7 @@ xlog_find_verify_log_record(
 		*last_blk = i;
 
 out:
-	kmem_free(bp);
+	kmem_free(buffer);
 	return error;
 }
 
@@ -551,7 +553,7 @@ xlog_find_head(
 	struct xlog	*log,
 	xfs_daddr_t	*return_head_blk)
 {
-	char		*bp;
+	char		*buffer;
 	char		*offset;
 	xfs_daddr_t	new_blk, first_blk, start_blk, last_blk, head_blk;
 	int		num_scan_bblks;
@@ -581,20 +583,20 @@ xlog_find_head(
 	}
 
 	first_blk = 0;			/* get cycle # of 1st block */
-	bp = xlog_get_bp(log, 1);
-	if (!bp)
+	buffer = xlog_alloc_buffer(log, 1);
+	if (!buffer)
 		return -ENOMEM;
 
-	error = xlog_bread(log, 0, 1, bp, &offset);
+	error = xlog_bread(log, 0, 1, buffer, &offset);
 	if (error)
-		goto bp_err;
+		goto out_free_buffer;
 
 	first_half_cycle = xlog_get_cycle(offset);
 
 	last_blk = head_blk = log_bbnum - 1;	/* get cycle # of last block */
-	error = xlog_bread(log, last_blk, 1, bp, &offset);
+	error = xlog_bread(log, last_blk, 1, buffer, &offset);
 	if (error)
-		goto bp_err;
+		goto out_free_buffer;
 
 	last_half_cycle = xlog_get_cycle(offset);
 	ASSERT(last_half_cycle != 0);
@@ -662,9 +664,10 @@ xlog_find_head(
 		 *                           ^ we want to locate this spot
 		 */
 		stop_on_cycle = last_half_cycle;
-		if ((error = xlog_find_cycle_start(log, bp, first_blk,
-						&head_blk, last_half_cycle)))
-			goto bp_err;
+		error = xlog_find_cycle_start(log, buffer, first_blk, &head_blk,
+				last_half_cycle);
+		if (error)
+			goto out_free_buffer;
 	}
 
 	/*
@@ -684,7 +687,7 @@ xlog_find_head(
 		if ((error = xlog_find_verify_cycle(log,
 						start_blk, num_scan_bblks,
 						stop_on_cycle, &new_blk)))
-			goto bp_err;
+			goto out_free_buffer;
 		if (new_blk != -1)
 			head_blk = new_blk;
 	} else {		/* need to read 2 parts of log */
@@ -721,7 +724,7 @@ xlog_find_head(
 		if ((error = xlog_find_verify_cycle(log, start_blk,
 					num_scan_bblks - (int)head_blk,
 					(stop_on_cycle - 1), &new_blk)))
-			goto bp_err;
+			goto out_free_buffer;
 		if (new_blk != -1) {
 			head_blk = new_blk;
 			goto validate_head;
@@ -737,7 +740,7 @@ xlog_find_head(
 		if ((error = xlog_find_verify_cycle(log,
 					start_blk, (int)head_blk,
 					stop_on_cycle, &new_blk)))
-			goto bp_err;
+			goto out_free_buffer;
 		if (new_blk != -1)
 			head_blk = new_blk;
 	}
@@ -756,13 +759,13 @@ xlog_find_head(
 		if (error == 1)
 			error = -EIO;
 		if (error)
-			goto bp_err;
+			goto out_free_buffer;
 	} else {
 		start_blk = 0;
 		ASSERT(head_blk <= INT_MAX);
 		error = xlog_find_verify_log_record(log, start_blk, &head_blk, 0);
 		if (error < 0)
-			goto bp_err;
+			goto out_free_buffer;
 		if (error == 1) {
 			/* We hit the beginning of the log during our search */
 			start_blk = log_bbnum - (num_scan_bblks - head_blk);
@@ -775,14 +778,14 @@ xlog_find_head(
 			if (error == 1)
 				error = -EIO;
 			if (error)
-				goto bp_err;
+				goto out_free_buffer;
 			if (new_blk != log_bbnum)
 				head_blk = new_blk;
 		} else if (error)
-			goto bp_err;
+			goto out_free_buffer;
 	}
 
-	kmem_free(bp);
+	kmem_free(buffer);
 	if (head_blk == log_bbnum)
 		*return_head_blk = 0;
 	else
@@ -795,9 +798,8 @@ xlog_find_head(
 	 */
 	return 0;
 
- bp_err:
-	kmem_free(bp);
-
+out_free_buffer:
+	kmem_free(buffer);
 	if (error)
 		xfs_warn(log->l_mp, "failed to find log head");
 	return error;
@@ -817,7 +819,7 @@ xlog_rseek_logrec_hdr(
 	xfs_daddr_t		head_blk,
 	xfs_daddr_t		tail_blk,
 	int			count,
-	char			*bp,
+	char			*buffer,
 	xfs_daddr_t		*rblk,
 	struct xlog_rec_header	**rhead,
 	bool			*wrapped)
@@ -836,7 +838,7 @@ xlog_rseek_logrec_hdr(
 	 */
 	end_blk = head_blk > tail_blk ? tail_blk : 0;
 	for (i = (int) head_blk - 1; i >= end_blk; i--) {
-		error = xlog_bread(log, i, 1, bp, &offset);
+		error = xlog_bread(log, i, 1, buffer, &offset);
 		if (error)
 			goto out_error;
 
@@ -855,7 +857,7 @@ xlog_rseek_logrec_hdr(
 	 */
 	if (tail_blk >= head_blk && found != count) {
 		for (i = log->l_logBBsize - 1; i >= (int) tail_blk; i--) {
-			error = xlog_bread(log, i, 1, bp, &offset);
+			error = xlog_bread(log, i, 1, buffer, &offset);
 			if (error)
 				goto out_error;
 
@@ -891,7 +893,7 @@ xlog_seek_logrec_hdr(
 	xfs_daddr_t		head_blk,
 	xfs_daddr_t		tail_blk,
 	int			count,
-	char			*bp,
+	char			*buffer,
 	xfs_daddr_t		*rblk,
 	struct xlog_rec_header	**rhead,
 	bool			*wrapped)
@@ -910,7 +912,7 @@ xlog_seek_logrec_hdr(
 	 */
 	end_blk = head_blk > tail_blk ? head_blk : log->l_logBBsize - 1;
 	for (i = (int) tail_blk; i <= end_blk; i++) {
-		error = xlog_bread(log, i, 1, bp, &offset);
+		error = xlog_bread(log, i, 1, buffer, &offset);
 		if (error)
 			goto out_error;
 
@@ -928,7 +930,7 @@ xlog_seek_logrec_hdr(
 	 */
 	if (tail_blk > head_blk && found != count) {
 		for (i = 0; i < (int) head_blk; i++) {
-			error = xlog_bread(log, i, 1, bp, &offset);
+			error = xlog_bread(log, i, 1, buffer, &offset);
 			if (error)
 				goto out_error;
 
@@ -991,22 +993,22 @@ xlog_verify_tail(
 	int			hsize)
 {
 	struct xlog_rec_header	*thead;
-	char			*bp;
+	char			*buffer;
 	xfs_daddr_t		first_bad;
 	int			error = 0;
 	bool			wrapped;
 	xfs_daddr_t		tmp_tail;
 	xfs_daddr_t		orig_tail = *tail_blk;
 
-	bp = xlog_get_bp(log, 1);
-	if (!bp)
+	buffer = xlog_alloc_buffer(log, 1);
+	if (!buffer)
 		return -ENOMEM;
 
 	/*
 	 * Make sure the tail points to a record (returns positive count on
 	 * success).
 	 */
-	error = xlog_seek_logrec_hdr(log, head_blk, *tail_blk, 1, bp,
+	error = xlog_seek_logrec_hdr(log, head_blk, *tail_blk, 1, buffer,
 			&tmp_tail, &thead, &wrapped);
 	if (error < 0)
 		goto out;
@@ -1035,8 +1037,8 @@ xlog_verify_tail(
 			break;
 
 		/* skip to the next record; returns positive count on success */
-		error = xlog_seek_logrec_hdr(log, head_blk, first_bad, 2, bp,
-				&tmp_tail, &thead, &wrapped);
+		error = xlog_seek_logrec_hdr(log, head_blk, first_bad, 2,
+				buffer, &tmp_tail, &thead, &wrapped);
 		if (error < 0)
 			goto out;
 
@@ -1051,7 +1053,7 @@ xlog_verify_tail(
 		"Tail block (0x%llx) overwrite detected. Updated to 0x%llx",
 			 orig_tail, *tail_blk);
 out:
-	kmem_free(bp);
+	kmem_free(buffer);
 	return error;
 }
 
@@ -1073,13 +1075,13 @@ xlog_verify_head(
 	struct xlog		*log,
 	xfs_daddr_t		*head_blk,	/* in/out: unverified head */
 	xfs_daddr_t		*tail_blk,	/* out: tail block */
-	char			*bp,
+	char			*buffer,
 	xfs_daddr_t		*rhead_blk,	/* start blk of last record */
 	struct xlog_rec_header	**rhead,	/* ptr to last record */
 	bool			*wrapped)	/* last rec. wraps phys. log */
 {
 	struct xlog_rec_header	*tmp_rhead;
-	char			*tmp_bp;
+	char			*tmp_buffer;
 	xfs_daddr_t		first_bad;
 	xfs_daddr_t		tmp_rhead_blk;
 	int			found;
@@ -1090,15 +1092,15 @@ xlog_verify_head(
 	 * Check the head of the log for torn writes. Search backwards from the
 	 * head until we hit the tail or the maximum number of log record I/Os
 	 * that could have been in flight at one time. Use a temporary buffer so
-	 * we don't trash the rhead/bp pointers from the caller.
+	 * we don't trash the rhead/buffer pointers from the caller.
 	 */
-	tmp_bp = xlog_get_bp(log, 1);
-	if (!tmp_bp)
+	tmp_buffer = xlog_alloc_buffer(log, 1);
+	if (!tmp_buffer)
 		return -ENOMEM;
 	error = xlog_rseek_logrec_hdr(log, *head_blk, *tail_blk,
-				      XLOG_MAX_ICLOGS, tmp_bp, &tmp_rhead_blk,
-				      &tmp_rhead, &tmp_wrapped);
-	kmem_free(tmp_bp);
+				      XLOG_MAX_ICLOGS, tmp_buffer,
+				      &tmp_rhead_blk, &tmp_rhead, &tmp_wrapped);
+	kmem_free(tmp_buffer);
 	if (error < 0)
 		return error;
 
@@ -1127,8 +1129,8 @@ xlog_verify_head(
 		 * (i.e., the records with invalid CRC) if the cycle number
 		 * matches the the current cycle.
 		 */
-		found = xlog_rseek_logrec_hdr(log, first_bad, *tail_blk, 1, bp,
-					      rhead_blk, rhead, wrapped);
+		found = xlog_rseek_logrec_hdr(log, first_bad, *tail_blk, 1,
+				buffer, rhead_blk, rhead, wrapped);
 		if (found < 0)
 			return found;
 		if (found == 0)		/* XXX: right thing to do here? */
@@ -1188,7 +1190,7 @@ xlog_check_unmount_rec(
 	xfs_daddr_t		*tail_blk,
 	struct xlog_rec_header	*rhead,
 	xfs_daddr_t		rhead_blk,
-	char			*bp,
+	char			*buffer,
 	bool			*clean)
 {
 	struct xlog_op_header	*op_head;
@@ -1231,7 +1233,7 @@ xlog_check_unmount_rec(
 	if (*head_blk == after_umount_blk &&
 	    be32_to_cpu(rhead->h_num_logops) == 1) {
 		umount_data_blk = xlog_wrap_logbno(log, rhead_blk + hblks);
-		error = xlog_bread(log, umount_data_blk, 1, bp, &offset);
+		error = xlog_bread(log, umount_data_blk, 1, buffer, &offset);
 		if (error)
 			return error;
 
@@ -1310,7 +1312,7 @@ xlog_find_tail(
 {
 	xlog_rec_header_t	*rhead;
 	char			*offset = NULL;
-	char			*bp;
+	char			*buffer;
 	int			error;
 	xfs_daddr_t		rhead_blk;
 	xfs_lsn_t		tail_lsn;
@@ -1324,11 +1326,11 @@ xlog_find_tail(
 		return error;
 	ASSERT(*head_blk < INT_MAX);
 
-	bp = xlog_get_bp(log, 1);
-	if (!bp)
+	buffer = xlog_alloc_buffer(log, 1);
+	if (!buffer)
 		return -ENOMEM;
 	if (*head_blk == 0) {				/* special case */
-		error = xlog_bread(log, 0, 1, bp, &offset);
+		error = xlog_bread(log, 0, 1, buffer, &offset);
 		if (error)
 			goto done;
 
@@ -1344,7 +1346,7 @@ xlog_find_tail(
 	 * block. This wraps all the way back around to the head so something is
 	 * seriously wrong if we can't find it.
 	 */
-	error = xlog_rseek_logrec_hdr(log, *head_blk, *head_blk, 1, bp,
+	error = xlog_rseek_logrec_hdr(log, *head_blk, *head_blk, 1, buffer,
 				      &rhead_blk, &rhead, &wrapped);
 	if (error < 0)
 		return error;
@@ -1365,7 +1367,7 @@ xlog_find_tail(
 	 * state to determine whether recovery is necessary.
 	 */
 	error = xlog_check_unmount_rec(log, head_blk, tail_blk, rhead,
-				       rhead_blk, bp, &clean);
+				       rhead_blk, buffer, &clean);
 	if (error)
 		goto done;
 
@@ -1382,7 +1384,7 @@ xlog_find_tail(
 	if (!clean) {
 		xfs_daddr_t	orig_head = *head_blk;
 
-		error = xlog_verify_head(log, head_blk, tail_blk, bp,
+		error = xlog_verify_head(log, head_blk, tail_blk, buffer,
 					 &rhead_blk, &rhead, &wrapped);
 		if (error)
 			goto done;
@@ -1393,7 +1395,7 @@ xlog_find_tail(
 				       wrapped);
 			tail_lsn = atomic64_read(&log->l_tail_lsn);
 			error = xlog_check_unmount_rec(log, head_blk, tail_blk,
-						       rhead, rhead_blk, bp,
+						       rhead, rhead_blk, buffer,
 						       &clean);
 			if (error)
 				goto done;
@@ -1431,7 +1433,7 @@ xlog_find_tail(
 		error = xlog_clear_stale_blocks(log, tail_lsn);
 
 done:
-	kmem_free(bp);
+	kmem_free(buffer);
 
 	if (error)
 		xfs_warn(log->l_mp, "failed to locate log tail");
@@ -1459,7 +1461,7 @@ xlog_find_zeroed(
 	struct xlog	*log,
 	xfs_daddr_t	*blk_no)
 {
-	char		*bp;
+	char		*buffer;
 	char		*offset;
 	uint	        first_cycle, last_cycle;
 	xfs_daddr_t	new_blk, last_blk, start_blk;
@@ -1469,35 +1471,36 @@ xlog_find_zeroed(
 	*blk_no = 0;
 
 	/* check totally zeroed log */
-	bp = xlog_get_bp(log, 1);
-	if (!bp)
+	buffer = xlog_alloc_buffer(log, 1);
+	if (!buffer)
 		return -ENOMEM;
-	error = xlog_bread(log, 0, 1, bp, &offset);
+	error = xlog_bread(log, 0, 1, buffer, &offset);
 	if (error)
-		goto bp_err;
+		goto out_free_buffer;
 
 	first_cycle = xlog_get_cycle(offset);
 	if (first_cycle == 0) {		/* completely zeroed log */
 		*blk_no = 0;
-		kmem_free(bp);
+		kmem_free(buffer);
 		return 1;
 	}
 
 	/* check partially zeroed log */
-	error = xlog_bread(log, log_bbnum-1, 1, bp, &offset);
+	error = xlog_bread(log, log_bbnum-1, 1, buffer, &offset);
 	if (error)
-		goto bp_err;
+		goto out_free_buffer;
 
 	last_cycle = xlog_get_cycle(offset);
 	if (last_cycle != 0) {		/* log completely written to */
-		kmem_free(bp);
+		kmem_free(buffer);
 		return 0;
 	}
 
 	/* we have a partially zeroed log */
 	last_blk = log_bbnum-1;
-	if ((error = xlog_find_cycle_start(log, bp, 0, &last_blk, 0)))
-		goto bp_err;
+	error = xlog_find_cycle_start(log, buffer, 0, &last_blk, 0);
+	if (error)
+		goto out_free_buffer;
 
 	/*
 	 * Validate the answer.  Because there is no way to guarantee that
@@ -1520,7 +1523,7 @@ xlog_find_zeroed(
 	 */
 	if ((error = xlog_find_verify_cycle(log, start_blk,
 					 (int)num_scan_bblks, 0, &new_blk)))
-		goto bp_err;
+		goto out_free_buffer;
 	if (new_blk != -1)
 		last_blk = new_blk;
 
@@ -1532,11 +1535,11 @@ xlog_find_zeroed(
 	if (error == 1)
 		error = -EIO;
 	if (error)
-		goto bp_err;
+		goto out_free_buffer;
 
 	*blk_no = last_blk;
-bp_err:
-	kmem_free(bp);
+out_free_buffer:
+	kmem_free(buffer);
 	if (error)
 		return error;
 	return 1;
@@ -1579,7 +1582,7 @@ xlog_write_log_records(
 	int		tail_block)
 {
 	char		*offset;
-	char		*bp;
+	char		*buffer;
 	int		balign, ealign;
 	int		sectbb = log->l_sectBBsize;
 	int		end_block = start_block + blocks;
@@ -1596,7 +1599,7 @@ xlog_write_log_records(
 	bufblks = 1 << ffs(blocks);
 	while (bufblks > log->l_logBBsize)
 		bufblks >>= 1;
-	while (!(bp = xlog_get_bp(log, bufblks))) {
+	while (!(buffer = xlog_alloc_buffer(log, bufblks))) {
 		bufblks >>= 1;
 		if (bufblks < sectbb)
 			return -ENOMEM;
@@ -1608,9 +1611,9 @@ xlog_write_log_records(
 	 */
 	balign = round_down(start_block, sectbb);
 	if (balign != start_block) {
-		error = xlog_bread_noalign(log, start_block, 1, bp);
+		error = xlog_bread_noalign(log, start_block, 1, buffer);
 		if (error)
-			goto out_put_bp;
+			goto out_free_buffer;
 
 		j = start_block - balign;
 	}
@@ -1628,27 +1631,27 @@ xlog_write_log_records(
 		ealign = round_down(end_block, sectbb);
 		if (j == 0 && (start_block + endcount > ealign)) {
 			error = xlog_bread_noalign(log, ealign, sectbb,
-					bp + BBTOB(ealign - start_block));
+					buffer + BBTOB(ealign - start_block));
 			if (error)
 				break;
 
 		}
 
-		offset = bp + xlog_align(log, start_block);
+		offset = buffer + xlog_align(log, start_block);
 		for (; j < endcount; j++) {
 			xlog_add_record(log, offset, cycle, i+j,
 					tail_cycle, tail_block);
 			offset += BBSIZE;
 		}
-		error = xlog_bwrite(log, start_block, endcount, bp);
+		error = xlog_bwrite(log, start_block, endcount, buffer);
 		if (error)
 			break;
 		start_block += endcount;
 		j = 0;
 	}
 
- out_put_bp:
-	kmem_free(bp);
+out_free_buffer:
+	kmem_free(buffer);
 	return error;
 }
 
@@ -5253,7 +5256,7 @@ xlog_do_recovery_pass(
 		 * iclog header and extract the header size from it.  Get a
 		 * new hbp that is the correct size.
 		 */
-		hbp = xlog_get_bp(log, 1);
+		hbp = xlog_alloc_buffer(log, 1);
 		if (!hbp)
 			return -ENOMEM;
 
@@ -5296,20 +5299,20 @@ xlog_do_recovery_pass(
 			if (h_size % XLOG_HEADER_CYCLE_SIZE)
 				hblks++;
 			kmem_free(hbp);
-			hbp = xlog_get_bp(log, hblks);
+			hbp = xlog_alloc_buffer(log, hblks);
 		} else {
 			hblks = 1;
 		}
 	} else {
 		ASSERT(log->l_sectBBsize == 1);
 		hblks = 1;
-		hbp = xlog_get_bp(log, 1);
+		hbp = xlog_alloc_buffer(log, 1);
 		h_size = XLOG_BIG_RECORD_BSIZE;
 	}
 
 	if (!hbp)
 		return -ENOMEM;
-	dbp = xlog_get_bp(log, BTOBB(h_size));
+	dbp = xlog_alloc_buffer(log, BTOBB(h_size));
 	if (!dbp) {
 		kmem_free(hbp);
 		return -ENOMEM;
-- 
2.20.1

[PATCH 18/20] xfs: remove unused buffer cache APIs

[Christoph Hellwig]

Now that the log code uses bios directly we can drop various special
cases in the buffer cache code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/xfs_buf.c | 83 ++----------------------------------------------
 fs/xfs/xfs_buf.h | 27 ----------------
 2 files changed, 2 insertions(+), 108 deletions(-)

diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c
index ade6ec28e1c9..68444d20d2ed 100644
--- a/fs/xfs/xfs_buf.c
+++ b/fs/xfs/xfs_buf.c
@@ -213,7 +213,7 @@ xfs_buf_free_maps(
 	}
 }
 
-struct xfs_buf *
+static struct xfs_buf *
 _xfs_buf_alloc(
 	struct xfs_buftarg	*target,
 	struct xfs_buf_map	*map,
@@ -909,72 +909,6 @@ xfs_buf_read_uncached(
 	return 0;
 }
 
-/*
- * Return a buffer allocated as an empty buffer and associated to external
- * memory via xfs_buf_associate_memory() back to it's empty state.
- */
-void
-xfs_buf_set_empty(
-	struct xfs_buf		*bp,
-	size_t			numblks)
-{
-	if (bp->b_pages)
-		_xfs_buf_free_pages(bp);
-
-	bp->b_pages = NULL;
-	bp->b_page_count = 0;
-	bp->b_addr = NULL;
-	bp->b_length = numblks;
-	bp->b_io_length = numblks;
-
-	ASSERT(bp->b_map_count == 1);
-	bp->b_bn = XFS_BUF_DADDR_NULL;
-	bp->b_maps[0].bm_bn = XFS_BUF_DADDR_NULL;
-	bp->b_maps[0].bm_len = bp->b_length;
-}
-
-int
-xfs_buf_associate_memory(
-	xfs_buf_t		*bp,
-	void			*mem,
-	size_t			len)
-{
-	int			rval;
-	int			i = 0;
-	unsigned long		pageaddr;
-	unsigned long		offset;
-	size_t			buflen;
-	int			page_count;
-
-	pageaddr = (unsigned long)mem & PAGE_MASK;
-	offset = (unsigned long)mem - pageaddr;
-	buflen = PAGE_ALIGN(len + offset);
-	page_count = buflen >> PAGE_SHIFT;
-
-	/* Free any previous set of page pointers */
-	if (bp->b_pages)
-		_xfs_buf_free_pages(bp);
-
-	bp->b_pages = NULL;
-	bp->b_addr = mem;
-
-	rval = _xfs_buf_get_pages(bp, page_count);
-	if (rval)
-		return rval;
-
-	bp->b_offset = offset;
-
-	for (i = 0; i < bp->b_page_count; i++) {
-		bp->b_pages[i] = kmem_to_page((void *)pageaddr);
-		pageaddr += PAGE_SIZE;
-	}
-
-	bp->b_io_length = BTOBB(len);
-	bp->b_length = BTOBB(buflen);
-
-	return 0;
-}
-
 xfs_buf_t *
 xfs_buf_get_uncached(
 	struct xfs_buftarg	*target,
@@ -1258,7 +1192,7 @@ xfs_buf_ioend_async(
 	struct xfs_buf	*bp)
 {
 	INIT_WORK(&bp->b_ioend_work, xfs_buf_ioend_work);
-	queue_work(bp->b_ioend_wq, &bp->b_ioend_work);
+	queue_work(bp->b_target->bt_mount->m_buf_workqueue, &bp->b_ioend_work);
 }
 
 void
@@ -1425,21 +1359,8 @@ _xfs_buf_ioapply(
 	 */
 	bp->b_error = 0;
 
-	/*
-	 * Initialize the I/O completion workqueue if we haven't yet or the
-	 * submitter has not opted to specify a custom one.
-	 */
-	if (!bp->b_ioend_wq)
-		bp->b_ioend_wq = bp->b_target->bt_mount->m_buf_workqueue;
-
 	if (bp->b_flags & XBF_WRITE) {
 		op = REQ_OP_WRITE;
-		if (bp->b_flags & XBF_SYNCIO)
-			op_flags = REQ_SYNC;
-		if (bp->b_flags & XBF_FUA)
-			op_flags |= REQ_FUA;
-		if (bp->b_flags & XBF_FLUSH)
-			op_flags |= REQ_PREFLUSH;
 
 		/*
 		 * Run the write verifier callback function if it exists. If
diff --git a/fs/xfs/xfs_buf.h b/fs/xfs/xfs_buf.h
index 15f6ce3974ac..c1965c7e76bb 100644
--- a/fs/xfs/xfs_buf.h
+++ b/fs/xfs/xfs_buf.h
@@ -36,11 +36,6 @@ typedef enum {
 #define XBF_STALE	 (1 << 6) /* buffer has been staled, do not find it */
 #define XBF_WRITE_FAIL	 (1 << 7) /* async writes have failed on this buffer */
 
-/* I/O hints for the BIO layer */
-#define XBF_SYNCIO	 (1 << 10)/* treat this buffer as synchronous I/O */
-#define XBF_FUA		 (1 << 11)/* force cache write through mode */
-#define XBF_FLUSH	 (1 << 12)/* flush the disk cache before a write */
-
 /* flags used only as arguments to access routines */
 #define XBF_TRYLOCK	 (1 << 16)/* lock requested, but do not wait */
 #define XBF_UNMAPPED	 (1 << 17)/* do not map the buffer */
@@ -61,9 +56,6 @@ typedef unsigned int xfs_buf_flags_t;
 	{ XBF_DONE,		"DONE" }, \
 	{ XBF_STALE,		"STALE" }, \
 	{ XBF_WRITE_FAIL,	"WRITE_FAIL" }, \
-	{ XBF_SYNCIO,		"SYNCIO" }, \
-	{ XBF_FUA,		"FUA" }, \
-	{ XBF_FLUSH,		"FLUSH" }, \
 	{ XBF_TRYLOCK,		"TRYLOCK" },	/* should never be set */\
 	{ XBF_UNMAPPED,		"UNMAPPED" },	/* ditto */\
 	{ _XBF_PAGES,		"PAGES" }, \
@@ -162,7 +154,6 @@ typedef struct xfs_buf {
 	xfs_buftarg_t		*b_target;	/* buffer target (device) */
 	void			*b_addr;	/* virtual address of buffer */
 	struct work_struct	b_ioend_work;
-	struct workqueue_struct	*b_ioend_wq;	/* I/O completion wq */
 	xfs_buf_iodone_t	b_iodone;	/* I/O completion function */
 	struct completion	b_iowait;	/* queue for I/O waiters */
 	void			*b_log_item;
@@ -207,21 +198,6 @@ struct xfs_buf *xfs_buf_incore(struct xfs_buftarg *target,
 			   xfs_daddr_t blkno, size_t numblks,
 			   xfs_buf_flags_t flags);
 
-struct xfs_buf *_xfs_buf_alloc(struct xfs_buftarg *target,
-			       struct xfs_buf_map *map, int nmaps,
-			       xfs_buf_flags_t flags);
-
-static inline struct xfs_buf *
-xfs_buf_alloc(
-	struct xfs_buftarg	*target,
-	xfs_daddr_t		blkno,
-	size_t			numblks,
-	xfs_buf_flags_t		flags)
-{
-	DEFINE_SINGLE_BUF_MAP(map, blkno, numblks);
-	return _xfs_buf_alloc(target, &map, 1, flags);
-}
-
 struct xfs_buf *xfs_buf_get_map(struct xfs_buftarg *target,
 			       struct xfs_buf_map *map, int nmaps,
 			       xfs_buf_flags_t flags);
@@ -267,9 +243,6 @@ xfs_buf_readahead(
 	return xfs_buf_readahead_map(target, &map, 1, ops);
 }
 
-void xfs_buf_set_empty(struct xfs_buf *bp, size_t numblks);
-int xfs_buf_associate_memory(struct xfs_buf *bp, void *mem, size_t length);
-
 struct xfs_buf *xfs_buf_get_uncached(struct xfs_buftarg *target, size_t numblks,
 				int flags);
 int xfs_buf_read_uncached(struct xfs_buftarg *target, xfs_daddr_t daddr,
-- 
2.20.1

[PATCH 19/20] xfs: properly type the b_log_item field in struct xfs_buf

[Christoph Hellwig]

Now that the log code doesn't abuse this field any more we can
declare it as a struct xfs_buf_log_item pointer.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/xfs_buf.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/xfs/xfs_buf.h b/fs/xfs/xfs_buf.h
index c1965c7e76bb..2abd2435d6aa 100644
--- a/fs/xfs/xfs_buf.h
+++ b/fs/xfs/xfs_buf.h
@@ -156,7 +156,7 @@ typedef struct xfs_buf {
 	struct work_struct	b_ioend_work;
 	xfs_buf_iodone_t	b_iodone;	/* I/O completion function */
 	struct completion	b_iowait;	/* queue for I/O waiters */
-	void			*b_log_item;
+	struct xfs_buf_log_item	*b_log_item;
 	struct list_head	b_li_list;	/* Log items list head */
 	struct xfs_trans	*b_transp;
 	struct page		**b_pages;	/* array of page pointers */
-- 
2.20.1

[PATCH 20/20] xfs: remove the b_io_length field in struct xfs_buf

[Christoph Hellwig]

This field is now always idential to b_length.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/xfs_buf.c         | 5 ++---
 fs/xfs/xfs_buf.h         | 1 -
 fs/xfs/xfs_log_recover.c | 9 ++++-----
 3 files changed, 6 insertions(+), 9 deletions(-)

diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c
index 68444d20d2ed..26027a93bdd3 100644
--- a/fs/xfs/xfs_buf.c
+++ b/fs/xfs/xfs_buf.c
@@ -263,7 +263,6 @@ _xfs_buf_alloc(
 		bp->b_maps[i].bm_len = map[i].bm_len;
 		bp->b_length += map[i].bm_len;
 	}
-	bp->b_io_length = bp->b_length;
 
 	atomic_set(&bp->b_pin_count, 0);
 	init_waitqueue_head(&bp->b_waiters);
@@ -1407,7 +1406,7 @@ _xfs_buf_ioapply(
 	 * subsequent call.
 	 */
 	offset = bp->b_offset;
-	size = BBTOB(bp->b_io_length);
+	size = BBTOB(bp->b_length);
 	blk_start_plug(&plug);
 	for (i = 0; i < bp->b_map_count; i++) {
 		xfs_buf_ioapply_map(bp, i, &offset, &size, op, op_flags);
@@ -1545,7 +1544,7 @@ xfs_buf_iomove(
 		page_offset = (boff + bp->b_offset) & ~PAGE_MASK;
 		page = bp->b_pages[page_index];
 		csize = min_t(size_t, PAGE_SIZE - page_offset,
-				      BBTOB(bp->b_io_length) - boff);
+				      BBTOB(bp->b_length) - boff);
 
 		ASSERT((csize + page_offset) <= PAGE_SIZE);
 
diff --git a/fs/xfs/xfs_buf.h b/fs/xfs/xfs_buf.h
index 2abd2435d6aa..f95cf810126e 100644
--- a/fs/xfs/xfs_buf.h
+++ b/fs/xfs/xfs_buf.h
@@ -164,7 +164,6 @@ typedef struct xfs_buf {
 	struct xfs_buf_map	*b_maps;	/* compound buffer map */
 	struct xfs_buf_map	__b_map;	/* inline compound buffer map */
 	int			b_map_count;
-	int			b_io_length;	/* IO size in BBs */
 	atomic_t		b_pin_count;	/* pin count */
 	atomic_t		b_io_remaining;	/* #outstanding I/O requests */
 	unsigned int		b_page_count;	/* size of page array */
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index 403c2c96ed71..bbe5e38e2932 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -2086,7 +2086,7 @@ xlog_recover_do_inode_buffer(
 	if (xfs_sb_version_hascrc(&mp->m_sb))
 		bp->b_ops = &xfs_inode_buf_ops;
 
-	inodes_per_buf = BBTOB(bp->b_io_length) >> mp->m_sb.sb_inodelog;
+	inodes_per_buf = BBTOB(bp->b_length) >> mp->m_sb.sb_inodelog;
 	for (i = 0; i < inodes_per_buf; i++) {
 		next_unlinked_offset = (i * mp->m_sb.sb_inodesize) +
 			offsetof(xfs_dinode_t, di_next_unlinked);
@@ -2128,8 +2128,7 @@ xlog_recover_do_inode_buffer(
 
 		ASSERT(item->ri_buf[item_index].i_addr != NULL);
 		ASSERT((item->ri_buf[item_index].i_len % XFS_BLF_CHUNK) == 0);
-		ASSERT((reg_buf_offset + reg_buf_bytes) <=
-							BBTOB(bp->b_io_length));
+		ASSERT((reg_buf_offset + reg_buf_bytes) <= BBTOB(bp->b_length));
 
 		/*
 		 * The current logged region contains a copy of the
@@ -2594,7 +2593,7 @@ xlog_recover_do_reg_buffer(
 		ASSERT(nbits > 0);
 		ASSERT(item->ri_buf[i].i_addr != NULL);
 		ASSERT(item->ri_buf[i].i_len % XFS_BLF_CHUNK == 0);
-		ASSERT(BBTOB(bp->b_io_length) >=
+		ASSERT(BBTOB(bp->b_length) >=
 		       ((uint)bit << XFS_BLF_SHIFT) + (nbits << XFS_BLF_SHIFT));
 
 		/*
@@ -2817,7 +2816,7 @@ xlog_recover_buffer_pass2(
 	 */
 	if (XFS_DINODE_MAGIC ==
 	    be16_to_cpu(*((__be16 *)xfs_buf_offset(bp, 0))) &&
-	    (BBTOB(bp->b_io_length) != max(log->l_mp->m_sb.sb_blocksize,
+	    (BBTOB(bp->b_length) != max(log->l_mp->m_sb.sb_blocksize,
 			(uint32_t)log->l_mp->m_inode_cluster_size))) {
 		xfs_buf_stale(bp);
 		error = xfs_bwrite(bp);
-- 
2.20.1

use bios directly in the log code v2

[Christoph Hellwig]

Hi all,

this series switches the log writing and log recovery code to use bios
directly, and remove various special cases from the buffer cache code.
Note that I have developed it on top of the previous series of log item
related cleanups, so if you don't have that applied there is a small
conflict.  To make life easier I have pushed out a git branche here:

    git://git.infradead.org/users/hch/xfs.git xfs-log-bio

Gitweb:

    http://git.infradead.org/users/hch/xfs.git/shortlog/refs/heads/xfs-log-bio

Changes since v2:
 - rename the 'flush' flag to 'need_flush'
 - spelling fixes
 - minor cleanups

Changes since v1:
 - rebased to not required the log item series first
 - split the bio-related code out of xfs_log_recover.c into a new file
   to ease using xfs_log_recover.c in xfsprogs
 - use kmem_alloc_large instead of vmalloc to allocate the buffer
 - additional minor cleanups

[PATCH 01/20] xfs: remove the no-op spinlock_destroy stub

[Christoph Hellwig]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
---
 fs/xfs/xfs_linux.h | 2 --
 fs/xfs/xfs_log.c   | 2 --
 2 files changed, 4 deletions(-)

diff --git a/fs/xfs/xfs_linux.h b/fs/xfs/xfs_linux.h
index edbd5a210df2..b78287666309 100644
--- a/fs/xfs/xfs_linux.h
+++ b/fs/xfs/xfs_linux.h
@@ -110,8 +110,6 @@ typedef __u32			xfs_nlink_t;
 #define current_restore_flags_nested(sp, f)	\
 		(current->flags = ((current->flags & ~(f)) | (*(sp) & (f))))
 
-#define spinlock_destroy(lock)
-
 #define NBBY		8		/* number of bits per byte */
 
 /*
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 457ced3ee3e1..a2048e46be4e 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -1580,7 +1580,6 @@ xlog_alloc_log(
 			xfs_buf_free(iclog->ic_bp);
 		kmem_free(iclog);
 	}
-	spinlock_destroy(&log->l_icloglock);
 	xfs_buf_free(log->l_xbuf);
 out_free_log:
 	kmem_free(log);
@@ -2027,7 +2026,6 @@ xlog_dealloc_log(
 		kmem_free(iclog);
 		iclog = next_iclog;
 	}
-	spinlock_destroy(&log->l_icloglock);
 
 	log->l_mp->m_log = NULL;
 	kmem_free(log);
-- 
2.20.1