* [PATCH] spi: sh-msiof: Reduce delays in sh_msiof_modify_ctr_wait()
@ 2019-05-27 12:19 ` Geert Uytterhoeven
0 siblings, 0 replies; 5+ messages in thread
From: Geert Uytterhoeven @ 2019-05-27 12:19 UTC (permalink / raw)
To: Mark Brown
Cc: Wolfram Sang, linux-spi, linux-renesas-soc, linux-sh,
linux-kernel, Geert Uytterhoeven
While the Hardware User Manual does not document the maximum time needed
for modifying bits in the MSIOF Control Register, experiments on R-Car
Gen2/Gen3 and SH-Mobile AG5 revealed the following typical modification
times for the various bits:
- CTR.TXE and CTR.RXE: no delay,
- CTR.TSCKE: less than 10 ns,
- CTR.TFSE: up to a few hundred ns (depending on SPI transfer clock,
i.e. less for faster transfers).
There are no reasons to believe these figures are different for
SH-MobileR2 SoCs (SH7723/SH7724).
Hence the minimum busy-looping delay of 10 µs is excessive.
Reduce the delay per loop iteration from 10 to 1 us, and the maximum
delay from 1000 to 100 µs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
drivers/spi/spi-sh-msiof.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index 6aab7b2136dbcadc..b50bdbc27e5899cc 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -229,7 +229,7 @@ static int sh_msiof_modify_ctr_wait(struct sh_msiof_spi_priv *p,
sh_msiof_write(p, CTR, data);
return readl_poll_timeout_atomic(p->mapbase + CTR, data,
- (data & mask) = set, 10, 1000);
+ (data & mask) = set, 1, 100);
}
static irqreturn_t sh_msiof_spi_irq(int irq, void *data)
--
2.17.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH] spi: sh-msiof: Reduce delays in sh_msiof_modify_ctr_wait()
@ 2019-05-27 12:19 ` Geert Uytterhoeven
0 siblings, 0 replies; 5+ messages in thread
From: Geert Uytterhoeven @ 2019-05-27 12:19 UTC (permalink / raw)
To: Mark Brown
Cc: Wolfram Sang, linux-spi, linux-renesas-soc, linux-sh,
linux-kernel, Geert Uytterhoeven
While the Hardware User Manual does not document the maximum time needed
for modifying bits in the MSIOF Control Register, experiments on R-Car
Gen2/Gen3 and SH-Mobile AG5 revealed the following typical modification
times for the various bits:
- CTR.TXE and CTR.RXE: no delay,
- CTR.TSCKE: less than 10 ns,
- CTR.TFSE: up to a few hundred ns (depending on SPI transfer clock,
i.e. less for faster transfers).
There are no reasons to believe these figures are different for
SH-MobileR2 SoCs (SH7723/SH7724).
Hence the minimum busy-looping delay of 10 µs is excessive.
Reduce the delay per loop iteration from 10 to 1 us, and the maximum
delay from 1000 to 100 µs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
drivers/spi/spi-sh-msiof.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index 6aab7b2136dbcadc..b50bdbc27e5899cc 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -229,7 +229,7 @@ static int sh_msiof_modify_ctr_wait(struct sh_msiof_spi_priv *p,
sh_msiof_write(p, CTR, data);
return readl_poll_timeout_atomic(p->mapbase + CTR, data,
- (data & mask) == set, 10, 1000);
+ (data & mask) == set, 1, 100);
}
static irqreturn_t sh_msiof_spi_irq(int irq, void *data)
--
2.17.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* Applied "spi: sh-msiof: Reduce delays in sh_msiof_modify_ctr_wait()" to the spi tree
2019-05-27 12:19 ` Geert Uytterhoeven
(?)
@ 2019-05-28 15:07 ` Mark Brown
-1 siblings, 0 replies; 5+ messages in thread
From: Mark Brown @ 2019-05-28 15:07 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: linux-kernel, linux-renesas-soc, linux-sh, linux-spi, Mark Brown,
Wolfram Sang
The patch
spi: sh-msiof: Reduce delays in sh_msiof_modify_ctr_wait()
has been applied to the spi tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-5.3
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 635bdb7a3e1fe1531573ff87b92c2506adafe7f7 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Mon, 27 May 2019 14:19:35 +0200
Subject: [PATCH] spi: sh-msiof: Reduce delays in sh_msiof_modify_ctr_wait()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
While the Hardware User Manual does not document the maximum time needed
for modifying bits in the MSIOF Control Register, experiments on R-Car
Gen2/Gen3 and SH-Mobile AG5 revealed the following typical modification
times for the various bits:
- CTR.TXE and CTR.RXE: no delay,
- CTR.TSCKE: less than 10 ns,
- CTR.TFSE: up to a few hundred ns (depending on SPI transfer clock,
i.e. less for faster transfers).
There are no reasons to believe these figures are different for
SH-MobileR2 SoCs (SH7723/SH7724).
Hence the minimum busy-looping delay of 10 µs is excessive.
Reduce the delay per loop iteration from 10 to 1 us, and the maximum
delay from 1000 to 100 µs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/spi/spi-sh-msiof.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index 6aab7b2136db..b50bdbc27e58 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -229,7 +229,7 @@ static int sh_msiof_modify_ctr_wait(struct sh_msiof_spi_priv *p,
sh_msiof_write(p, CTR, data);
return readl_poll_timeout_atomic(p->mapbase + CTR, data,
- (data & mask) = set, 10, 1000);
+ (data & mask) = set, 1, 100);
}
static irqreturn_t sh_msiof_spi_irq(int irq, void *data)
--
2.20.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* Applied "spi: sh-msiof: Reduce delays in sh_msiof_modify_ctr_wait()" to the spi tree
@ 2019-05-28 15:07 ` Mark Brown
0 siblings, 0 replies; 5+ messages in thread
From: Mark Brown @ 2019-05-28 15:07 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: linux-kernel, linux-renesas-soc, linux-sh, linux-spi, Mark Brown,
Wolfram Sang
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 2657 bytes --]
The patch
spi: sh-msiof: Reduce delays in sh_msiof_modify_ctr_wait()
has been applied to the spi tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-5.3
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 635bdb7a3e1fe1531573ff87b92c2506adafe7f7 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Mon, 27 May 2019 14:19:35 +0200
Subject: [PATCH] spi: sh-msiof: Reduce delays in sh_msiof_modify_ctr_wait()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
While the Hardware User Manual does not document the maximum time needed
for modifying bits in the MSIOF Control Register, experiments on R-Car
Gen2/Gen3 and SH-Mobile AG5 revealed the following typical modification
times for the various bits:
- CTR.TXE and CTR.RXE: no delay,
- CTR.TSCKE: less than 10 ns,
- CTR.TFSE: up to a few hundred ns (depending on SPI transfer clock,
i.e. less for faster transfers).
There are no reasons to believe these figures are different for
SH-MobileR2 SoCs (SH7723/SH7724).
Hence the minimum busy-looping delay of 10 µs is excessive.
Reduce the delay per loop iteration from 10 to 1 us, and the maximum
delay from 1000 to 100 µs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/spi/spi-sh-msiof.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index 6aab7b2136db..b50bdbc27e58 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -229,7 +229,7 @@ static int sh_msiof_modify_ctr_wait(struct sh_msiof_spi_priv *p,
sh_msiof_write(p, CTR, data);
return readl_poll_timeout_atomic(p->mapbase + CTR, data,
- (data & mask) == set, 10, 1000);
+ (data & mask) == set, 1, 100);
}
static irqreturn_t sh_msiof_spi_irq(int irq, void *data)
--
2.20.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* Applied "spi: sh-msiof: Reduce delays in sh_msiof_modify_ctr_wait()" to the spi tree
@ 2019-05-28 15:07 ` Mark Brown
0 siblings, 0 replies; 5+ messages in thread
From: Mark Brown @ 2019-05-28 15:07 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: linux-kernel, linux-renesas-soc, linux-sh, linux-spi, Mark Brown,
Wolfram Sang
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 2657 bytes --]
The patch
spi: sh-msiof: Reduce delays in sh_msiof_modify_ctr_wait()
has been applied to the spi tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-5.3
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 635bdb7a3e1fe1531573ff87b92c2506adafe7f7 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Mon, 27 May 2019 14:19:35 +0200
Subject: [PATCH] spi: sh-msiof: Reduce delays in sh_msiof_modify_ctr_wait()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
While the Hardware User Manual does not document the maximum time needed
for modifying bits in the MSIOF Control Register, experiments on R-Car
Gen2/Gen3 and SH-Mobile AG5 revealed the following typical modification
times for the various bits:
- CTR.TXE and CTR.RXE: no delay,
- CTR.TSCKE: less than 10 ns,
- CTR.TFSE: up to a few hundred ns (depending on SPI transfer clock,
i.e. less for faster transfers).
There are no reasons to believe these figures are different for
SH-MobileR2 SoCs (SH7723/SH7724).
Hence the minimum busy-looping delay of 10 µs is excessive.
Reduce the delay per loop iteration from 10 to 1 us, and the maximum
delay from 1000 to 100 µs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/spi/spi-sh-msiof.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index 6aab7b2136db..b50bdbc27e58 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -229,7 +229,7 @@ static int sh_msiof_modify_ctr_wait(struct sh_msiof_spi_priv *p,
sh_msiof_write(p, CTR, data);
return readl_poll_timeout_atomic(p->mapbase + CTR, data,
- (data & mask) == set, 10, 1000);
+ (data & mask) == set, 1, 100);
}
static irqreturn_t sh_msiof_spi_irq(int irq, void *data)
--
2.20.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-05-28 15:07 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-27 12:19 [PATCH] spi: sh-msiof: Reduce delays in sh_msiof_modify_ctr_wait() Geert Uytterhoeven
2019-05-27 12:19 ` Geert Uytterhoeven
2019-05-28 15:07 ` Applied "spi: sh-msiof: Reduce delays in sh_msiof_modify_ctr_wait()" to the spi tree Mark Brown
2019-05-28 15:07 ` Mark Brown
2019-05-28 15:07 ` Mark Brown
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.