All of lore.kernel.org
 help / color / mirror / Atom feed
* [Qemu-devel] [PATCH v2 0/8] pseries: Allow hotplug of P2P bridges and devices under P2P bridges
@ 2019-05-30  5:38 David Gibson
  2019-05-30  5:38 ` [Qemu-devel] [PATCH v2 1/8] spapr: Clean up device node name generation for PCI devices David Gibson
                   ` (8 more replies)
  0 siblings, 9 replies; 11+ messages in thread
From: David Gibson @ 2019-05-30  5:38 UTC (permalink / raw)
  To: qemu-devel, qemu-ppc; +Cc: mdroth, mst, groug, David Gibson

PAPR has its own PCI hotplug mechanism which we implemented quite a
while ago.  However, we weren't able to hotplug devices under PCI
bridges, because the pci-bridge code would try to handle the hotplug
using SHPC which won't work with PAPR.

We now have the infrastructure in the hotplug core to have the machine
take control of the hotplug before the bus tries to claim it, which
lets us address this.  While we're about it, make a bunch of cleanups
and also allow hot plug of P2P bridges themselves (this turns out to
be quite straightforward once the rest is in place).

For now, we don't support hot unplug of bridges - this seems to cause
problems, at least for a Linux guest.  I suspect the problem is on the
guest side, but for now just prohibit until we have time to
investigate properly.

Changes since v1:
 * Added proper cover letter
 * Addressed some minor comments

David Gibson (8):
  spapr: Clean up device node name generation for PCI devices
  spapr: Clean up device tree construction for PCI devices
  spapr: Clean up dt creation for PCI buses
  spapr: Clean up spapr_drc_populate_dt()
  spapr: Clean up DRC index construction
  spapr: Don't use bus number for building DRC ids
  spapr: Direct all PCI hotplug to host bridge, rather than P2P bridge
  spapr: Allow hot plug/unplug of PCI bridges and devices under PCI
    bridges

 hw/ppc/spapr.c              |  25 +-
 hw/ppc/spapr_drc.c          |  13 +-
 hw/ppc/spapr_pci.c          | 486 ++++++++++++++++++++++--------------
 include/hw/pci-host/spapr.h |   4 +-
 include/hw/ppc/spapr_drc.h  |   3 +-
 5 files changed, 327 insertions(+), 204 deletions(-)

-- 
2.21.0



^ permalink raw reply	[flat|nested] 11+ messages in thread

* [Qemu-devel] [PATCH v2 1/8] spapr: Clean up device node name generation for PCI devices
  2019-05-30  5:38 [Qemu-devel] [PATCH v2 0/8] pseries: Allow hotplug of P2P bridges and devices under P2P bridges David Gibson
@ 2019-05-30  5:38 ` David Gibson
  2019-05-30  5:38 ` [Qemu-devel] [PATCH v2 2/8] spapr: Clean up device tree construction " David Gibson
                   ` (7 subsequent siblings)
  8 siblings, 0 replies; 11+ messages in thread
From: David Gibson @ 2019-05-30  5:38 UTC (permalink / raw)
  To: qemu-devel, qemu-ppc; +Cc: mdroth, mst, groug, David Gibson

spapr_populate_pci_child_dt() adds a 'name' property to the device tree
node for PCI devices.  This is never necessary for a flattened device tree,
it is implicit in the name added when the node is constructed.  In fact
anything we do add to a 'name' property will be overwritten with something
derived from the structural name in the guest firmware (but in fact it is
exactly the same bytes).

So, remove that.  In addition, pci_get_node_name() is very simple, so fold
it into its (also simple) sole caller spapr_create_pci_child_dt().

While we're there rename pci_find_device_name() to the shorter and more
accurate dt_name_from_class().

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
---
 hw/ppc/spapr_pci.c | 41 ++++++++++++++++-------------------------
 1 file changed, 16 insertions(+), 25 deletions(-)

diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
index 97961b0128..3f86cf8620 100644
--- a/hw/ppc/spapr_pci.c
+++ b/hw/ppc/spapr_pci.c
@@ -1173,8 +1173,8 @@ static const PCIClass pci_classes[] = {
     { "data-processing-controller", spc_subclass },
 };
 
-static const char *pci_find_device_name(uint8_t class, uint8_t subclass,
-                                        uint8_t iface)
+static const char *dt_name_from_class(uint8_t class, uint8_t subclass,
+                                      uint8_t iface)
 {
     const PCIClass *pclass;
     const PCISubClass *psubclass;
@@ -1216,23 +1216,6 @@ static const char *pci_find_device_name(uint8_t class, uint8_t subclass,
     return name;
 }
 
-static gchar *pci_get_node_name(PCIDevice *dev)
-{
-    int slot = PCI_SLOT(dev->devfn);
-    int func = PCI_FUNC(dev->devfn);
-    uint32_t ccode = pci_default_read_config(dev, PCI_CLASS_PROG, 3);
-    const char *name;
-
-    name = pci_find_device_name((ccode >> 16) & 0xff, (ccode >> 8) & 0xff,
-                                ccode & 0xff);
-
-    if (func != 0) {
-        return g_strdup_printf("%s@%x,%x", name, slot, func);
-    } else {
-        return g_strdup_printf("%s@%x", name, slot);
-    }
-}
-
 static uint32_t spapr_phb_get_pci_drc_index(SpaprPhbState *phb,
                                             PCIDevice *pdev);
 
@@ -1300,11 +1283,6 @@ static void spapr_populate_pci_child_dt(PCIDevice *dev, void *fdt, int offset,
         _FDT(fdt_setprop(fdt, offset, "udf-supported", NULL, 0));
     }
 
-    _FDT(fdt_setprop_string(fdt, offset, "name",
-                            pci_find_device_name((ccode >> 16) & 0xff,
-                                                 (ccode >> 8) & 0xff,
-                                                 ccode & 0xff)));
-
     buf = spapr_phb_get_loc_code(sphb, dev);
     _FDT(fdt_setprop_string(fdt, offset, "ibm,loc-code", buf));
     g_free(buf);
@@ -1348,10 +1326,23 @@ static int spapr_create_pci_child_dt(SpaprPhbState *phb, PCIDevice *dev,
                                      void *fdt, int node_offset)
 {
     int offset;
+    const gchar *basename;
     gchar *nodename;
+    int slot = PCI_SLOT(dev->devfn);
+    int func = PCI_FUNC(dev->devfn);
+    uint32_t ccode = pci_default_read_config(dev, PCI_CLASS_PROG, 3);
+
+    basename = dt_name_from_class((ccode >> 16) & 0xff, (ccode >> 8) & 0xff,
+                                  ccode & 0xff);
+
+    if (func != 0) {
+        nodename = g_strdup_printf("%s@%x,%x", basename, slot, func);
+    } else {
+        nodename = g_strdup_printf("%s@%x", basename, slot);
+    }
 
-    nodename = pci_get_node_name(dev);
     _FDT(offset = fdt_add_subnode(fdt, node_offset, nodename));
+
     g_free(nodename);
 
     spapr_populate_pci_child_dt(dev, fdt, offset, phb);
-- 
2.21.0



^ permalink raw reply related	[flat|nested] 11+ messages in thread

* [Qemu-devel] [PATCH v2 2/8] spapr: Clean up device tree construction for PCI devices
  2019-05-30  5:38 [Qemu-devel] [PATCH v2 0/8] pseries: Allow hotplug of P2P bridges and devices under P2P bridges David Gibson
  2019-05-30  5:38 ` [Qemu-devel] [PATCH v2 1/8] spapr: Clean up device node name generation for PCI devices David Gibson
@ 2019-05-30  5:38 ` David Gibson
  2019-05-30  5:38 ` [Qemu-devel] [PATCH v2 3/8] spapr: Clean up dt creation for PCI buses David Gibson
                   ` (6 subsequent siblings)
  8 siblings, 0 replies; 11+ messages in thread
From: David Gibson @ 2019-05-30  5:38 UTC (permalink / raw)
  To: qemu-devel, qemu-ppc; +Cc: mdroth, mst, groug, David Gibson

spapr_create_pci_child_dt() is a trivial wrapper around
spapr_populate_pci_child_dt(), but is the latter's only caller.  So fold
them together into spapr_dt_pci_device(), which closer matches our modern
naming convention.

While there, make a number of cleanups to the function itself.  This is
mostly using more temporary locals to avoid awkwardly long lines, and in
some cases avoiding double reads of PCI config space variables.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
---
 hw/ppc/spapr_pci.c | 119 +++++++++++++++++++++------------------------
 1 file changed, 55 insertions(+), 64 deletions(-)

diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
index 3f86cf8620..5b038ef071 100644
--- a/hw/ppc/spapr_pci.c
+++ b/hw/ppc/spapr_pci.c
@@ -1219,57 +1219,75 @@ static const char *dt_name_from_class(uint8_t class, uint8_t subclass,
 static uint32_t spapr_phb_get_pci_drc_index(SpaprPhbState *phb,
                                             PCIDevice *pdev);
 
-static void spapr_populate_pci_child_dt(PCIDevice *dev, void *fdt, int offset,
-                                       SpaprPhbState *sphb)
+/* create OF node for pci device and required OF DT properties */
+static int spapr_dt_pci_device(SpaprPhbState *sphb, PCIDevice *dev,
+                               void *fdt, int parent_offset)
 {
+    int offset;
+    const gchar *basename;
+    gchar *nodename;
+    int slot = PCI_SLOT(dev->devfn);
+    int func = PCI_FUNC(dev->devfn);
     ResourceProps rp;
-    bool is_bridge = false;
-    int pci_status;
-    char *buf = NULL;
     uint32_t drc_index = spapr_phb_get_pci_drc_index(sphb, dev);
+    uint32_t header_type = pci_default_read_config(dev, PCI_HEADER_TYPE, 1);
+    bool is_bridge = (header_type == PCI_HEADER_TYPE_BRIDGE);
+    uint32_t vendor_id = pci_default_read_config(dev, PCI_VENDOR_ID, 2);
+    uint32_t device_id = pci_default_read_config(dev, PCI_DEVICE_ID, 2);
+    uint32_t revision_id = pci_default_read_config(dev, PCI_REVISION_ID, 1);
     uint32_t ccode = pci_default_read_config(dev, PCI_CLASS_PROG, 3);
-    uint32_t max_msi, max_msix;
+    uint32_t irq_pin = pci_default_read_config(dev, PCI_INTERRUPT_PIN, 1);
+    uint32_t subsystem_id = pci_default_read_config(dev, PCI_SUBSYSTEM_ID, 2);
+    uint32_t subsystem_vendor_id =
+        pci_default_read_config(dev, PCI_SUBSYSTEM_VENDOR_ID, 2);
+    uint32_t cache_line_size =
+        pci_default_read_config(dev, PCI_CACHE_LINE_SIZE, 1);
+    uint32_t pci_status = pci_default_read_config(dev, PCI_STATUS, 2);
+    gchar *loc_code;
 
-    if (pci_default_read_config(dev, PCI_HEADER_TYPE, 1) ==
-        PCI_HEADER_TYPE_BRIDGE) {
-        is_bridge = true;
+    basename = dt_name_from_class((ccode >> 16) & 0xff, (ccode >> 8) & 0xff,
+                                  ccode & 0xff);
+
+    if (func != 0) {
+        nodename = g_strdup_printf("%s@%x,%x", basename, slot, func);
+    } else {
+        nodename = g_strdup_printf("%s@%x", basename, slot);
     }
 
+    _FDT(offset = fdt_add_subnode(fdt, parent_offset, nodename));
+
+    g_free(nodename);
+
     /* in accordance with PAPR+ v2.7 13.6.3, Table 181 */
-    _FDT(fdt_setprop_cell(fdt, offset, "vendor-id",
-                          pci_default_read_config(dev, PCI_VENDOR_ID, 2)));
-    _FDT(fdt_setprop_cell(fdt, offset, "device-id",
-                          pci_default_read_config(dev, PCI_DEVICE_ID, 2)));
-    _FDT(fdt_setprop_cell(fdt, offset, "revision-id",
-                          pci_default_read_config(dev, PCI_REVISION_ID, 1)));
+    _FDT(fdt_setprop_cell(fdt, offset, "vendor-id", vendor_id));
+    _FDT(fdt_setprop_cell(fdt, offset, "device-id", device_id));
+    _FDT(fdt_setprop_cell(fdt, offset, "revision-id", revision_id));
+
     _FDT(fdt_setprop_cell(fdt, offset, "class-code", ccode));
-    if (pci_default_read_config(dev, PCI_INTERRUPT_PIN, 1)) {
-        _FDT(fdt_setprop_cell(fdt, offset, "interrupts",
-                 pci_default_read_config(dev, PCI_INTERRUPT_PIN, 1)));
+    if (irq_pin) {
+        _FDT(fdt_setprop_cell(fdt, offset, "interrupts", irq_pin));
     }
 
     if (!is_bridge) {
-        _FDT(fdt_setprop_cell(fdt, offset, "min-grant",
-            pci_default_read_config(dev, PCI_MIN_GNT, 1)));
-        _FDT(fdt_setprop_cell(fdt, offset, "max-latency",
-            pci_default_read_config(dev, PCI_MAX_LAT, 1)));
+        uint32_t min_grant = pci_default_read_config(dev, PCI_MIN_GNT, 1);
+        uint32_t max_latency = pci_default_read_config(dev, PCI_MAX_LAT, 1);
+        _FDT(fdt_setprop_cell(fdt, offset, "min-grant", min_grant));
+        _FDT(fdt_setprop_cell(fdt, offset, "max-latency", max_latency));
     }
 
-    if (pci_default_read_config(dev, PCI_SUBSYSTEM_ID, 2)) {
-        _FDT(fdt_setprop_cell(fdt, offset, "subsystem-id",
-                 pci_default_read_config(dev, PCI_SUBSYSTEM_ID, 2)));
+    if (subsystem_id) {
+        _FDT(fdt_setprop_cell(fdt, offset, "subsystem-id", subsystem_id));
     }
 
-    if (pci_default_read_config(dev, PCI_SUBSYSTEM_VENDOR_ID, 2)) {
+    if (subsystem_vendor_id) {
         _FDT(fdt_setprop_cell(fdt, offset, "subsystem-vendor-id",
-                 pci_default_read_config(dev, PCI_SUBSYSTEM_VENDOR_ID, 2)));
+                              subsystem_vendor_id));
     }
 
-    _FDT(fdt_setprop_cell(fdt, offset, "cache-line-size",
-        pci_default_read_config(dev, PCI_CACHE_LINE_SIZE, 1)));
+    _FDT(fdt_setprop_cell(fdt, offset, "cache-line-size", cache_line_size));
+
 
     /* the following fdt cells are masked off the pci status register */
-    pci_status = pci_default_read_config(dev, PCI_STATUS, 2);
     _FDT(fdt_setprop_cell(fdt, offset, "devsel-speed",
                           PCI_STATUS_DEVSEL_MASK & pci_status));
 
@@ -1283,9 +1301,9 @@ static void spapr_populate_pci_child_dt(PCIDevice *dev, void *fdt, int offset,
         _FDT(fdt_setprop(fdt, offset, "udf-supported", NULL, 0));
     }
 
-    buf = spapr_phb_get_loc_code(sphb, dev);
-    _FDT(fdt_setprop_string(fdt, offset, "ibm,loc-code", buf));
-    g_free(buf);
+    loc_code = spapr_phb_get_loc_code(sphb, dev);
+    _FDT(fdt_setprop_string(fdt, offset, "ibm,loc-code", loc_code));
+    g_free(loc_code);
 
     if (drc_index) {
         _FDT(fdt_setprop_cell(fdt, offset, "ibm,my-drc-index", drc_index));
@@ -1297,13 +1315,13 @@ static void spapr_populate_pci_child_dt(PCIDevice *dev, void *fdt, int offset,
                           RESOURCE_CELLS_SIZE));
 
     if (msi_present(dev)) {
-        max_msi = msi_nr_vectors_allocated(dev);
+        uint32_t max_msi = msi_nr_vectors_allocated(dev);
         if (max_msi) {
             _FDT(fdt_setprop_cell(fdt, offset, "ibm,req#msi", max_msi));
         }
     }
     if (msix_present(dev)) {
-        max_msix = dev->msix_entries_nr;
+        uint32_t max_msix = dev->msix_entries_nr;
         if (max_msix) {
             _FDT(fdt_setprop_cell(fdt, offset, "ibm,req#msi-x", max_msix));
         }
@@ -1319,33 +1337,6 @@ static void spapr_populate_pci_child_dt(PCIDevice *dev, void *fdt, int offset,
     }
 
     spapr_phb_nvgpu_populate_pcidev_dt(dev, fdt, offset, sphb);
-}
-
-/* create OF node for pci device and required OF DT properties */
-static int spapr_create_pci_child_dt(SpaprPhbState *phb, PCIDevice *dev,
-                                     void *fdt, int node_offset)
-{
-    int offset;
-    const gchar *basename;
-    gchar *nodename;
-    int slot = PCI_SLOT(dev->devfn);
-    int func = PCI_FUNC(dev->devfn);
-    uint32_t ccode = pci_default_read_config(dev, PCI_CLASS_PROG, 3);
-
-    basename = dt_name_from_class((ccode >> 16) & 0xff, (ccode >> 8) & 0xff,
-                                  ccode & 0xff);
-
-    if (func != 0) {
-        nodename = g_strdup_printf("%s@%x,%x", basename, slot, func);
-    } else {
-        nodename = g_strdup_printf("%s@%x", basename, slot);
-    }
-
-    _FDT(offset = fdt_add_subnode(fdt, node_offset, nodename));
-
-    g_free(nodename);
-
-    spapr_populate_pci_child_dt(dev, fdt, offset, phb);
 
     return offset;
 }
@@ -1393,7 +1384,7 @@ int spapr_pci_dt_populate(SpaprDrc *drc, SpaprMachineState *spapr,
     SpaprPhbState *sphb = SPAPR_PCI_HOST_BRIDGE(plug_handler);
     PCIDevice *pdev = PCI_DEVICE(drc->dev);
 
-    *fdt_start_offset = spapr_create_pci_child_dt(sphb, pdev, fdt, 0);
+    *fdt_start_offset = spapr_dt_pci_device(sphb, pdev, fdt, 0);
     return 0;
 }
 
@@ -2086,7 +2077,7 @@ static void spapr_populate_pci_devices_dt(PCIBus *bus, PCIDevice *pdev,
     int offset;
     SpaprFdt s_fdt;
 
-    offset = spapr_create_pci_child_dt(p->sphb, pdev, p->fdt, p->node_off);
+    offset = spapr_dt_pci_device(p->sphb, pdev, p->fdt, p->node_off);
     if (!offset) {
         error_report("Failed to create pci child device tree node");
         return;
-- 
2.21.0



^ permalink raw reply related	[flat|nested] 11+ messages in thread

* [Qemu-devel] [PATCH v2 3/8] spapr: Clean up dt creation for PCI buses
  2019-05-30  5:38 [Qemu-devel] [PATCH v2 0/8] pseries: Allow hotplug of P2P bridges and devices under P2P bridges David Gibson
  2019-05-30  5:38 ` [Qemu-devel] [PATCH v2 1/8] spapr: Clean up device node name generation for PCI devices David Gibson
  2019-05-30  5:38 ` [Qemu-devel] [PATCH v2 2/8] spapr: Clean up device tree construction " David Gibson
@ 2019-05-30  5:38 ` David Gibson
  2019-05-31  4:45   ` Alexey Kardashevskiy
  2019-05-30  5:38 ` [Qemu-devel] [PATCH v2 4/8] spapr: Clean up spapr_drc_populate_dt() David Gibson
                   ` (5 subsequent siblings)
  8 siblings, 1 reply; 11+ messages in thread
From: David Gibson @ 2019-05-30  5:38 UTC (permalink / raw)
  To: qemu-devel, qemu-ppc; +Cc: mdroth, mst, groug, David Gibson

Device nodes for PCI bridges (both host and P2P) describe both the bridge
device itself and the bus hanging off it, handling of this is a bit of a
mess.

spapr_dt_pci_device() has a few things it only adds for non-bridges, but
always adds #address-cells and #size-cells which should only appear for
bridges.  But the walking down the subordinate PCI bus is done in one of
its callers spapr_populate_pci_devices_dt().  The PHB dt creation in
spapr_populate_pci_dt() open codes some similar logic to the bridge case.

This patch consolidates things in a bunch of ways:
 * Bus specific dt info is now created in spapr_dt_pci_bus() used for both
   P2P bridges and the host bridge.  This includes walking subordinate
   devices
 * spapr_dt_pci_device() now calls spapr_dt_pci_bus() when called on a
   P2P bridge
 * We do detection of bridges with the is_bridge field of the device class,
   rather than checking PCI config space directly, for consistency with
   qemu's core PCI code.
 * Several things are renamed for brevity and clarity

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
---
 hw/ppc/spapr.c              |   7 +-
 hw/ppc/spapr_pci.c          | 140 +++++++++++++++++++-----------------
 include/hw/pci-host/spapr.h |   4 +-
 3 files changed, 79 insertions(+), 72 deletions(-)

diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
index e2b33e5890..44573adce7 100644
--- a/hw/ppc/spapr.c
+++ b/hw/ppc/spapr.c
@@ -1309,8 +1309,7 @@ static void *spapr_build_fdt(SpaprMachineState *spapr)
     }
 
     QLIST_FOREACH(phb, &spapr->phbs, list) {
-        ret = spapr_populate_pci_dt(phb, PHANDLE_INTC, fdt,
-                                    spapr->irq->nr_msis, NULL);
+        ret = spapr_dt_phb(phb, PHANDLE_INTC, fdt, spapr->irq->nr_msis, NULL);
         if (ret < 0) {
             error_report("couldn't setup PCI devices in fdt");
             exit(1);
@@ -3917,8 +3916,8 @@ int spapr_phb_dt_populate(SpaprDrc *drc, SpaprMachineState *spapr,
         return -1;
     }
 
-    if (spapr_populate_pci_dt(sphb, intc_phandle, fdt, spapr->irq->nr_msis,
-                              fdt_start_offset)) {
+    if (spapr_dt_phb(sphb, intc_phandle, fdt, spapr->irq->nr_msis,
+                     fdt_start_offset)) {
         error_setg(errp, "unable to create FDT node for PHB %d", sphb->index);
         return -1;
     }
diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
index 5b038ef071..08537c8c85 100644
--- a/hw/ppc/spapr_pci.c
+++ b/hw/ppc/spapr_pci.c
@@ -1219,6 +1219,60 @@ static const char *dt_name_from_class(uint8_t class, uint8_t subclass,
 static uint32_t spapr_phb_get_pci_drc_index(SpaprPhbState *phb,
                                             PCIDevice *pdev);
 
+typedef struct PciWalkFdt {
+    void *fdt;
+    int offset;
+    SpaprPhbState *sphb;
+    int err;
+} PciWalkFdt;
+
+static int spapr_dt_pci_device(SpaprPhbState *sphb, PCIDevice *dev,
+                               void *fdt, int parent_offset);
+
+static void spapr_dt_pci_device_cb(PCIBus *bus, PCIDevice *pdev,
+                                   void *opaque)
+{
+    PciWalkFdt *p = opaque;
+    int err;
+
+    if (p->err) {
+        /* Something's already broken, don't keep going */
+        return;
+    }
+
+    err = spapr_dt_pci_device(p->sphb, pdev, p->fdt, p->offset);
+    if (err < 0) {
+        p->err = err;
+    }
+}
+
+/* Augment PCI device node with bridge specific information */
+static int spapr_dt_pci_bus(SpaprPhbState *sphb, PCIBus *bus,
+                               void *fdt, int offset)
+{
+    PciWalkFdt cbinfo = {
+        .fdt = fdt,
+        .offset = offset,
+        .sphb = sphb,
+        .err = 0,
+    };
+
+    _FDT(fdt_setprop_cell(fdt, offset, "#address-cells",
+                          RESOURCE_CELLS_ADDRESS));
+    _FDT(fdt_setprop_cell(fdt, offset, "#size-cells",
+                          RESOURCE_CELLS_SIZE));
+
+    if (bus) {
+        pci_for_each_device_reverse(bus, pci_bus_num(bus),
+                                    spapr_dt_pci_device_cb, &cbinfo);
+        if (cbinfo.err) {
+            return cbinfo.err;
+        }
+    }
+
+    return offset;
+}
+
 /* create OF node for pci device and required OF DT properties */
 static int spapr_dt_pci_device(SpaprPhbState *sphb, PCIDevice *dev,
                                void *fdt, int parent_offset)
@@ -1228,10 +1282,9 @@ static int spapr_dt_pci_device(SpaprPhbState *sphb, PCIDevice *dev,
     gchar *nodename;
     int slot = PCI_SLOT(dev->devfn);
     int func = PCI_FUNC(dev->devfn);
+    PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(dev);
     ResourceProps rp;
     uint32_t drc_index = spapr_phb_get_pci_drc_index(sphb, dev);
-    uint32_t header_type = pci_default_read_config(dev, PCI_HEADER_TYPE, 1);
-    bool is_bridge = (header_type == PCI_HEADER_TYPE_BRIDGE);
     uint32_t vendor_id = pci_default_read_config(dev, PCI_VENDOR_ID, 2);
     uint32_t device_id = pci_default_read_config(dev, PCI_DEVICE_ID, 2);
     uint32_t revision_id = pci_default_read_config(dev, PCI_REVISION_ID, 1);
@@ -1268,13 +1321,6 @@ static int spapr_dt_pci_device(SpaprPhbState *sphb, PCIDevice *dev,
         _FDT(fdt_setprop_cell(fdt, offset, "interrupts", irq_pin));
     }
 
-    if (!is_bridge) {
-        uint32_t min_grant = pci_default_read_config(dev, PCI_MIN_GNT, 1);
-        uint32_t max_latency = pci_default_read_config(dev, PCI_MAX_LAT, 1);
-        _FDT(fdt_setprop_cell(fdt, offset, "min-grant", min_grant));
-        _FDT(fdt_setprop_cell(fdt, offset, "max-latency", max_latency));
-    }
-
     if (subsystem_id) {
         _FDT(fdt_setprop_cell(fdt, offset, "subsystem-id", subsystem_id));
     }
@@ -1309,11 +1355,6 @@ static int spapr_dt_pci_device(SpaprPhbState *sphb, PCIDevice *dev,
         _FDT(fdt_setprop_cell(fdt, offset, "ibm,my-drc-index", drc_index));
     }
 
-    _FDT(fdt_setprop_cell(fdt, offset, "#address-cells",
-                          RESOURCE_CELLS_ADDRESS));
-    _FDT(fdt_setprop_cell(fdt, offset, "#size-cells",
-                          RESOURCE_CELLS_SIZE));
-
     if (msi_present(dev)) {
         uint32_t max_msi = msi_nr_vectors_allocated(dev);
         if (max_msi) {
@@ -1338,7 +1379,18 @@ static int spapr_dt_pci_device(SpaprPhbState *sphb, PCIDevice *dev,
 
     spapr_phb_nvgpu_populate_pcidev_dt(dev, fdt, offset, sphb);
 
-    return offset;
+    if (!pc->is_bridge) {
+        /* Properties only for non-bridges */
+        uint32_t min_grant = pci_default_read_config(dev, PCI_MIN_GNT, 1);
+        uint32_t max_latency = pci_default_read_config(dev, PCI_MAX_LAT, 1);
+        _FDT(fdt_setprop_cell(fdt, offset, "min-grant", min_grant));
+        _FDT(fdt_setprop_cell(fdt, offset, "max-latency", max_latency));
+        return offset;
+    } else {
+        PCIBus *sec_bus = pci_bridge_get_sec_bus(PCI_BRIDGE(dev));
+
+        return spapr_dt_pci_bus(sphb, sec_bus, fdt, offset);
+    }
 }
 
 /* Callback to be called during DRC release. */
@@ -2063,44 +2115,6 @@ static const TypeInfo spapr_phb_info = {
     }
 };
 
-typedef struct SpaprFdt {
-    void *fdt;
-    int node_off;
-    SpaprPhbState *sphb;
-} SpaprFdt;
-
-static void spapr_populate_pci_devices_dt(PCIBus *bus, PCIDevice *pdev,
-                                          void *opaque)
-{
-    PCIBus *sec_bus;
-    SpaprFdt *p = opaque;
-    int offset;
-    SpaprFdt s_fdt;
-
-    offset = spapr_dt_pci_device(p->sphb, pdev, p->fdt, p->node_off);
-    if (!offset) {
-        error_report("Failed to create pci child device tree node");
-        return;
-    }
-
-    if ((pci_default_read_config(pdev, PCI_HEADER_TYPE, 1) !=
-         PCI_HEADER_TYPE_BRIDGE)) {
-        return;
-    }
-
-    sec_bus = pci_bridge_get_sec_bus(PCI_BRIDGE(pdev));
-    if (!sec_bus) {
-        return;
-    }
-
-    s_fdt.fdt = p->fdt;
-    s_fdt.node_off = offset;
-    s_fdt.sphb = p->sphb;
-    pci_for_each_device_reverse(sec_bus, pci_bus_num(sec_bus),
-                                spapr_populate_pci_devices_dt,
-                                &s_fdt);
-}
-
 static void spapr_phb_pci_enumerate_bridge(PCIBus *bus, PCIDevice *pdev,
                                            void *opaque)
 {
@@ -2138,8 +2152,8 @@ static void spapr_phb_pci_enumerate(SpaprPhbState *phb)
 
 }
 
-int spapr_populate_pci_dt(SpaprPhbState *phb, uint32_t intc_phandle, void *fdt,
-                          uint32_t nr_msis, int *node_offset)
+int spapr_dt_phb(SpaprPhbState *phb, uint32_t intc_phandle, void *fdt,
+                 uint32_t nr_msis, int *node_offset)
 {
     int bus_off, i, j, ret;
     uint32_t bus_range[] = { cpu_to_be32(0), cpu_to_be32(0xff) };
@@ -2186,8 +2200,6 @@ int spapr_populate_pci_dt(SpaprPhbState *phb, uint32_t intc_phandle, void *fdt,
                                 cpu_to_be32(0x0),
                                 cpu_to_be32(phb->numa_node)};
     SpaprTceTable *tcet;
-    PCIBus *bus = PCI_HOST_BRIDGE(phb)->bus;
-    SpaprFdt s_fdt;
     SpaprDrc *drc;
     Error *errp = NULL;
 
@@ -2200,8 +2212,6 @@ int spapr_populate_pci_dt(SpaprPhbState *phb, uint32_t intc_phandle, void *fdt,
     /* Write PHB properties */
     _FDT(fdt_setprop_string(fdt, bus_off, "device_type", "pci"));
     _FDT(fdt_setprop_string(fdt, bus_off, "compatible", "IBM,Logical_PHB"));
-    _FDT(fdt_setprop_cell(fdt, bus_off, "#address-cells", 0x3));
-    _FDT(fdt_setprop_cell(fdt, bus_off, "#size-cells", 0x2));
     _FDT(fdt_setprop_cell(fdt, bus_off, "#interrupt-cells", 0x1));
     _FDT(fdt_setprop(fdt, bus_off, "used-by-rtas", NULL, 0));
     _FDT(fdt_setprop(fdt, bus_off, "bus-range", &bus_range, sizeof(bus_range)));
@@ -2266,13 +2276,11 @@ int spapr_populate_pci_dt(SpaprPhbState *phb, uint32_t intc_phandle, void *fdt,
     spapr_phb_pci_enumerate(phb);
     _FDT(fdt_setprop_cell(fdt, bus_off, "qemu,phb-enumerated", 0x1));
 
-    /* Populate tree nodes with PCI devices attached */
-    s_fdt.fdt = fdt;
-    s_fdt.node_off = bus_off;
-    s_fdt.sphb = phb;
-    pci_for_each_device_reverse(bus, pci_bus_num(bus),
-                                spapr_populate_pci_devices_dt,
-                                &s_fdt);
+    /* Walk the bridge and subordinate buses */
+    ret = spapr_dt_pci_bus(phb, PCI_HOST_BRIDGE(phb)->bus, fdt, bus_off);
+    if (ret) {
+        return ret;
+    }
 
     ret = spapr_drc_populate_dt(fdt, bus_off, OBJECT(phb),
                                 SPAPR_DR_CONNECTOR_TYPE_PCI);
diff --git a/include/hw/pci-host/spapr.h b/include/hw/pci-host/spapr.h
index 53519c835e..1b61162f91 100644
--- a/include/hw/pci-host/spapr.h
+++ b/include/hw/pci-host/spapr.h
@@ -131,8 +131,8 @@ static inline qemu_irq spapr_phb_lsi_qirq(struct SpaprPhbState *phb, int pin)
     return spapr_qirq(spapr, phb->lsi_table[pin].irq);
 }
 
-int spapr_populate_pci_dt(SpaprPhbState *phb, uint32_t intc_phandle, void *fdt,
-                          uint32_t nr_msis, int *node_offset);
+int spapr_dt_phb(SpaprPhbState *phb, uint32_t intc_phandle, void *fdt,
+                 uint32_t nr_msis, int *node_offset);
 
 void spapr_pci_rtas_init(void);
 
-- 
2.21.0



^ permalink raw reply related	[flat|nested] 11+ messages in thread

* [Qemu-devel] [PATCH v2 4/8] spapr: Clean up spapr_drc_populate_dt()
  2019-05-30  5:38 [Qemu-devel] [PATCH v2 0/8] pseries: Allow hotplug of P2P bridges and devices under P2P bridges David Gibson
                   ` (2 preceding siblings ...)
  2019-05-30  5:38 ` [Qemu-devel] [PATCH v2 3/8] spapr: Clean up dt creation for PCI buses David Gibson
@ 2019-05-30  5:38 ` David Gibson
  2019-05-30  5:38 ` [Qemu-devel] [PATCH v2 5/8] spapr: Clean up DRC index construction David Gibson
                   ` (4 subsequent siblings)
  8 siblings, 0 replies; 11+ messages in thread
From: David Gibson @ 2019-05-30  5:38 UTC (permalink / raw)
  To: qemu-devel, qemu-ppc; +Cc: mdroth, mst, groug, David Gibson

This makes some minor cleanups to spapr_drc_populate_dt(), renaming it to
the shorter and more idiomatic spapr_dt_drc() along the way.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
---
 hw/ppc/spapr.c             |  7 +++----
 hw/ppc/spapr_drc.c         | 13 ++++++-------
 hw/ppc/spapr_pci.c         |  3 +--
 include/hw/ppc/spapr_drc.h |  3 +--
 4 files changed, 11 insertions(+), 15 deletions(-)

diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
index 44573adce7..507fd50dd5 100644
--- a/hw/ppc/spapr.c
+++ b/hw/ppc/spapr.c
@@ -1320,13 +1320,12 @@ static void *spapr_build_fdt(SpaprMachineState *spapr)
     spapr_populate_cpus_dt_node(fdt, spapr);
 
     if (smc->dr_lmb_enabled) {
-        _FDT(spapr_drc_populate_dt(fdt, 0, NULL, SPAPR_DR_CONNECTOR_TYPE_LMB));
+        _FDT(spapr_dt_drc(fdt, 0, NULL, SPAPR_DR_CONNECTOR_TYPE_LMB));
     }
 
     if (mc->has_hotpluggable_cpus) {
         int offset = fdt_path_offset(fdt, "/cpus");
-        ret = spapr_drc_populate_dt(fdt, offset, NULL,
-                                    SPAPR_DR_CONNECTOR_TYPE_CPU);
+        ret = spapr_dt_drc(fdt, offset, NULL, SPAPR_DR_CONNECTOR_TYPE_CPU);
         if (ret < 0) {
             error_report("Couldn't set up CPU DR device tree properties");
             exit(1);
@@ -1363,7 +1362,7 @@ static void *spapr_build_fdt(SpaprMachineState *spapr)
     }
 
     if (smc->dr_phb_enabled) {
-        ret = spapr_drc_populate_dt(fdt, 0, NULL, SPAPR_DR_CONNECTOR_TYPE_PHB);
+        ret = spapr_dt_drc(fdt, 0, NULL, SPAPR_DR_CONNECTOR_TYPE_PHB);
         if (ret < 0) {
             error_report("Couldn't set up PHB DR device tree properties");
             exit(1);
diff --git a/hw/ppc/spapr_drc.c b/hw/ppc/spapr_drc.c
index 597f236b9c..bacadfcac5 100644
--- a/hw/ppc/spapr_drc.c
+++ b/hw/ppc/spapr_drc.c
@@ -781,7 +781,7 @@ SpaprDrc *spapr_drc_by_id(const char *type, uint32_t id)
 }
 
 /**
- * spapr_drc_populate_dt
+ * spapr_dt_drc
  *
  * @fdt: libfdt device tree
  * @path: path in the DT to generate properties
@@ -794,8 +794,7 @@ SpaprDrc *spapr_drc_by_id(const char *type, uint32_t id)
  *
  * as documented in PAPR+ v2.1, 13.5.2
  */
-int spapr_drc_populate_dt(void *fdt, int fdt_offset, Object *owner,
-                          uint32_t drc_type_mask)
+int spapr_dt_drc(void *fdt, int offset, Object *owner, uint32_t drc_type_mask)
 {
     Object *root_container;
     ObjectProperty *prop;
@@ -873,7 +872,7 @@ int spapr_drc_populate_dt(void *fdt, int fdt_offset, Object *owner,
     *(uint32_t *)drc_names->str = cpu_to_be32(drc_count);
     *(uint32_t *)drc_types->str = cpu_to_be32(drc_count);
 
-    ret = fdt_setprop(fdt, fdt_offset, "ibm,drc-indexes",
+    ret = fdt_setprop(fdt, offset, "ibm,drc-indexes",
                       drc_indexes->data,
                       drc_indexes->len * sizeof(uint32_t));
     if (ret) {
@@ -881,7 +880,7 @@ int spapr_drc_populate_dt(void *fdt, int fdt_offset, Object *owner,
         goto out;
     }
 
-    ret = fdt_setprop(fdt, fdt_offset, "ibm,drc-power-domains",
+    ret = fdt_setprop(fdt, offset, "ibm,drc-power-domains",
                       drc_power_domains->data,
                       drc_power_domains->len * sizeof(uint32_t));
     if (ret) {
@@ -889,14 +888,14 @@ int spapr_drc_populate_dt(void *fdt, int fdt_offset, Object *owner,
         goto out;
     }
 
-    ret = fdt_setprop(fdt, fdt_offset, "ibm,drc-names",
+    ret = fdt_setprop(fdt, offset, "ibm,drc-names",
                       drc_names->str, drc_names->len);
     if (ret) {
         error_report("Couldn't finalize ibm,drc-names property");
         goto out;
     }
 
-    ret = fdt_setprop(fdt, fdt_offset, "ibm,drc-types",
+    ret = fdt_setprop(fdt, offset, "ibm,drc-types",
                       drc_types->str, drc_types->len);
     if (ret) {
         error_report("Couldn't finalize ibm,drc-types property");
diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
index 08537c8c85..efbbe705c7 100644
--- a/hw/ppc/spapr_pci.c
+++ b/hw/ppc/spapr_pci.c
@@ -2282,8 +2282,7 @@ int spapr_dt_phb(SpaprPhbState *phb, uint32_t intc_phandle, void *fdt,
         return ret;
     }
 
-    ret = spapr_drc_populate_dt(fdt, bus_off, OBJECT(phb),
-                                SPAPR_DR_CONNECTOR_TYPE_PCI);
+    ret = spapr_dt_drc(fdt, bus_off, OBJECT(phb), SPAPR_DR_CONNECTOR_TYPE_PCI);
     if (ret) {
         return ret;
     }
diff --git a/include/hw/ppc/spapr_drc.h b/include/hw/ppc/spapr_drc.h
index fad0a887f9..c2c543a591 100644
--- a/include/hw/ppc/spapr_drc.h
+++ b/include/hw/ppc/spapr_drc.h
@@ -266,8 +266,7 @@ SpaprDrc *spapr_dr_connector_new(Object *owner, const char *type,
                                          uint32_t id);
 SpaprDrc *spapr_drc_by_index(uint32_t index);
 SpaprDrc *spapr_drc_by_id(const char *type, uint32_t id);
-int spapr_drc_populate_dt(void *fdt, int fdt_offset, Object *owner,
-                          uint32_t drc_type_mask);
+int spapr_dt_drc(void *fdt, int offset, Object *owner, uint32_t drc_type_mask);
 
 void spapr_drc_attach(SpaprDrc *drc, DeviceState *d, Error **errp);
 void spapr_drc_detach(SpaprDrc *drc);
-- 
2.21.0



^ permalink raw reply related	[flat|nested] 11+ messages in thread

* [Qemu-devel] [PATCH v2 5/8] spapr: Clean up DRC index construction
  2019-05-30  5:38 [Qemu-devel] [PATCH v2 0/8] pseries: Allow hotplug of P2P bridges and devices under P2P bridges David Gibson
                   ` (3 preceding siblings ...)
  2019-05-30  5:38 ` [Qemu-devel] [PATCH v2 4/8] spapr: Clean up spapr_drc_populate_dt() David Gibson
@ 2019-05-30  5:38 ` David Gibson
  2019-05-30  5:38 ` [Qemu-devel] [PATCH v2 6/8] spapr: Don't use bus number for building DRC ids David Gibson
                   ` (3 subsequent siblings)
  8 siblings, 0 replies; 11+ messages in thread
From: David Gibson @ 2019-05-30  5:38 UTC (permalink / raw)
  To: qemu-devel, qemu-ppc; +Cc: mdroth, mst, groug, David Gibson

spapr_pci.c currently has several confusingly similarly named functions for
various conversions between representations of DRCs.  Make things clearer
by renaming things in a more consistent XXX_from_YYY() manner and remove
some called-only-once variants in favour of open coding.

While we're at it, move this code together in the file to avoid some extra
forward references, and split out construction and removal of DRCs for the
host bridge into helper functions.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
---
 hw/ppc/spapr_pci.c | 124 +++++++++++++++++++++++++--------------------
 1 file changed, 68 insertions(+), 56 deletions(-)

diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
index efbbe705c7..9dd64bd0bd 100644
--- a/hw/ppc/spapr_pci.c
+++ b/hw/ppc/spapr_pci.c
@@ -1216,8 +1216,60 @@ static const char *dt_name_from_class(uint8_t class, uint8_t subclass,
     return name;
 }
 
-static uint32_t spapr_phb_get_pci_drc_index(SpaprPhbState *phb,
-                                            PCIDevice *pdev);
+/*
+ * DRC helper functions
+ */
+
+static uint32_t drc_id_from_devfn(SpaprPhbState *phb,
+                                  uint32_t busnr,
+                                  int32_t devfn)
+{
+    return (phb->index << 16) | (busnr << 8) | devfn;
+}
+
+static SpaprDrc *drc_from_devfn(SpaprPhbState *phb,
+                                uint32_t busnr, int32_t devfn)
+{
+    return spapr_drc_by_id(TYPE_SPAPR_DRC_PCI,
+                           drc_id_from_devfn(phb, busnr, devfn));
+}
+
+static SpaprDrc *drc_from_dev(SpaprPhbState *phb, PCIDevice *dev)
+{
+    uint32_t busnr = pci_bus_num(PCI_BUS(qdev_get_parent_bus(DEVICE(dev))));
+    return drc_from_devfn(phb, busnr, dev->devfn);
+}
+
+static void add_drcs(SpaprPhbState *phb)
+{
+    int i;
+
+    if (!phb->dr_enabled) {
+        return;
+    }
+
+    for (i = 0; i < PCI_SLOT_MAX * PCI_FUNC_MAX; i++) {
+        spapr_dr_connector_new(OBJECT(phb), TYPE_SPAPR_DRC_PCI,
+                               drc_id_from_devfn(phb, 0, i));
+    }
+}
+
+static void remove_drcs(SpaprPhbState *phb)
+{
+    int i;
+
+    if (!phb->dr_enabled) {
+        return;
+    }
+
+    for (i = PCI_SLOT_MAX * PCI_FUNC_MAX - 1; i >= 0; i--) {
+        SpaprDrc *drc = drc_from_devfn(phb, 0, i);
+
+        if (drc) {
+            object_unparent(OBJECT(drc));
+        }
+    }
+}
 
 typedef struct PciWalkFdt {
     void *fdt;
@@ -1284,7 +1336,7 @@ static int spapr_dt_pci_device(SpaprPhbState *sphb, PCIDevice *dev,
     int func = PCI_FUNC(dev->devfn);
     PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(dev);
     ResourceProps rp;
-    uint32_t drc_index = spapr_phb_get_pci_drc_index(sphb, dev);
+    SpaprDrc *drc = drc_from_dev(sphb, dev);
     uint32_t vendor_id = pci_default_read_config(dev, PCI_VENDOR_ID, 2);
     uint32_t device_id = pci_default_read_config(dev, PCI_DEVICE_ID, 2);
     uint32_t revision_id = pci_default_read_config(dev, PCI_REVISION_ID, 1);
@@ -1351,8 +1403,9 @@ static int spapr_dt_pci_device(SpaprPhbState *sphb, PCIDevice *dev,
     _FDT(fdt_setprop_string(fdt, offset, "ibm,loc-code", loc_code));
     g_free(loc_code);
 
-    if (drc_index) {
-        _FDT(fdt_setprop_cell(fdt, offset, "ibm,my-drc-index", drc_index));
+    if (drc) {
+        _FDT(fdt_setprop_cell(fdt, offset, "ibm,my-drc-index",
+                              spapr_drc_index(drc)));
     }
 
     if (msi_present(dev)) {
@@ -1402,33 +1455,6 @@ void spapr_phb_remove_pci_device_cb(DeviceState *dev)
     object_unparent(OBJECT(dev));
 }
 
-static SpaprDrc *spapr_phb_get_pci_func_drc(SpaprPhbState *phb,
-                                                    uint32_t busnr,
-                                                    int32_t devfn)
-{
-    return spapr_drc_by_id(TYPE_SPAPR_DRC_PCI,
-                           (phb->index << 16) | (busnr << 8) | devfn);
-}
-
-static SpaprDrc *spapr_phb_get_pci_drc(SpaprPhbState *phb,
-                                               PCIDevice *pdev)
-{
-    uint32_t busnr = pci_bus_num(PCI_BUS(qdev_get_parent_bus(DEVICE(pdev))));
-    return spapr_phb_get_pci_func_drc(phb, busnr, pdev->devfn);
-}
-
-static uint32_t spapr_phb_get_pci_drc_index(SpaprPhbState *phb,
-                                            PCIDevice *pdev)
-{
-    SpaprDrc *drc = spapr_phb_get_pci_drc(phb, pdev);
-
-    if (!drc) {
-        return 0;
-    }
-
-    return spapr_drc_index(drc);
-}
-
 int spapr_pci_dt_populate(SpaprDrc *drc, SpaprMachineState *spapr,
                           void *fdt, int *fdt_start_offset, Error **errp)
 {
@@ -1445,7 +1471,7 @@ static void spapr_pci_plug(HotplugHandler *plug_handler,
 {
     SpaprPhbState *phb = SPAPR_PCI_HOST_BRIDGE(DEVICE(plug_handler));
     PCIDevice *pdev = PCI_DEVICE(plugged_dev);
-    SpaprDrc *drc = spapr_phb_get_pci_drc(phb, pdev);
+    SpaprDrc *drc = drc_from_dev(phb, pdev);
     Error *local_err = NULL;
     PCIBus *bus = PCI_BUS(qdev_get_parent_bus(DEVICE(pdev)));
     uint32_t slotnr = PCI_SLOT(pdev->devfn);
@@ -1496,8 +1522,8 @@ static void spapr_pci_plug(HotplugHandler *plug_handler,
             SpaprDrcClass *func_drck;
             SpaprDREntitySense state;
 
-            func_drc = spapr_phb_get_pci_func_drc(phb, pci_bus_num(bus),
-                                                  PCI_DEVFN(slotnr, i));
+            func_drc = drc_from_devfn(phb, pci_bus_num(bus),
+                                      PCI_DEVFN(slotnr, i));
             func_drck = SPAPR_DR_CONNECTOR_GET_CLASS(func_drc);
             state = func_drck->dr_entity_sense(func_drc);
 
@@ -1533,7 +1559,7 @@ static void spapr_pci_unplug_request(HotplugHandler *plug_handler,
 {
     SpaprPhbState *phb = SPAPR_PCI_HOST_BRIDGE(DEVICE(plug_handler));
     PCIDevice *pdev = PCI_DEVICE(plugged_dev);
-    SpaprDrc *drc = spapr_phb_get_pci_drc(phb, pdev);
+    SpaprDrc *drc = drc_from_dev(phb, pdev);
 
     if (!phb->dr_enabled) {
         error_setg(errp, QERR_BUS_NO_HOTPLUG,
@@ -1555,8 +1581,8 @@ static void spapr_pci_unplug_request(HotplugHandler *plug_handler,
         /* ensure any other present functions are pending unplug */
         if (PCI_FUNC(pdev->devfn) == 0) {
             for (i = 1; i < 8; i++) {
-                func_drc = spapr_phb_get_pci_func_drc(phb, pci_bus_num(bus),
-                                                      PCI_DEVFN(slotnr, i));
+                func_drc = drc_from_devfn(phb, pci_bus_num(bus),
+                                          PCI_DEVFN(slotnr, i));
                 func_drck = SPAPR_DR_CONNECTOR_GET_CLASS(func_drc);
                 state = func_drck->dr_entity_sense(func_drc);
                 if (state == SPAPR_DR_ENTITY_SENSE_PRESENT
@@ -1577,8 +1603,8 @@ static void spapr_pci_unplug_request(HotplugHandler *plug_handler,
          */
         if (PCI_FUNC(pdev->devfn) == 0) {
             for (i = 7; i >= 0; i--) {
-                func_drc = spapr_phb_get_pci_func_drc(phb, pci_bus_num(bus),
-                                                      PCI_DEVFN(slotnr, i));
+                func_drc = drc_from_devfn(phb, pci_bus_num(bus),
+                                          PCI_DEVFN(slotnr, i));
                 func_drck = SPAPR_DR_CONNECTOR_GET_CLASS(func_drc);
                 state = func_drck->dr_entity_sense(func_drc);
                 if (state == SPAPR_DR_ENTITY_SENSE_PRESENT) {
@@ -1626,16 +1652,7 @@ static void spapr_phb_unrealize(DeviceState *dev, Error **errp)
         }
     }
 
-    if (sphb->dr_enabled) {
-        for (i = PCI_SLOT_MAX * 8 - 1; i >= 0; i--) {
-            SpaprDrc *drc = spapr_drc_by_id(TYPE_SPAPR_DRC_PCI,
-                                                    (sphb->index << 16) | i);
-
-            if (drc) {
-                object_unparent(OBJECT(drc));
-            }
-        }
-    }
+    remove_drcs(sphb);
 
     for (i = PCI_NUM_PINS - 1; i >= 0; i--) {
         if (sphb->lsi_table[i].irq) {
@@ -1861,12 +1878,7 @@ static void spapr_phb_realize(DeviceState *dev, Error **errp)
     }
 
     /* allocate connectors for child PCI devices */
-    if (sphb->dr_enabled) {
-        for (i = 0; i < PCI_SLOT_MAX * 8; i++) {
-            spapr_dr_connector_new(OBJECT(phb), TYPE_SPAPR_DRC_PCI,
-                                   (sphb->index << 16) | i);
-        }
-    }
+    add_drcs(sphb);
 
     /* DMA setup */
     for (i = 0; i < windows_supported; ++i) {
-- 
2.21.0



^ permalink raw reply related	[flat|nested] 11+ messages in thread

* [Qemu-devel] [PATCH v2 6/8] spapr: Don't use bus number for building DRC ids
  2019-05-30  5:38 [Qemu-devel] [PATCH v2 0/8] pseries: Allow hotplug of P2P bridges and devices under P2P bridges David Gibson
                   ` (4 preceding siblings ...)
  2019-05-30  5:38 ` [Qemu-devel] [PATCH v2 5/8] spapr: Clean up DRC index construction David Gibson
@ 2019-05-30  5:38 ` David Gibson
  2019-05-30  5:38 ` [Qemu-devel] [PATCH v2 7/8] spapr: Direct all PCI hotplug to host bridge, rather than P2P bridge David Gibson
                   ` (2 subsequent siblings)
  8 siblings, 0 replies; 11+ messages in thread
From: David Gibson @ 2019-05-30  5:38 UTC (permalink / raw)
  To: qemu-devel, qemu-ppc; +Cc: mdroth, mst, groug, David Gibson

DRC ids are more or less arbitrary, as long as they're consistent.  For
PCI, we notionally build them from the phb's index along with PCI bus
number, slot and function number.

Using bus number is broken, however, because it can change if the guest
re-enumerates the PCI topology for whatever reason (e.g. due to hotplug
of a bridge, which we don't support yet but want to).

Fortunately, there's an alternative.  Bridges are required to have a unique
non-zero "chassis number" that we can use instead.  Adjust the code to
use that instead.

This looks like it would introduce a guest visible breaking change, but
in fact it does not because we don't yet ever use non-zero bus numbers.
Both chassis and bus number are always 0 for the root bus, so there's no
change for the existing cases.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
---
 hw/ppc/spapr_pci.c | 54 ++++++++++++++++++++++++++++++++++------------
 1 file changed, 40 insertions(+), 14 deletions(-)

diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
index 9dd64bd0bd..513b70f9ad 100644
--- a/hw/ppc/spapr_pci.c
+++ b/hw/ppc/spapr_pci.c
@@ -1221,23 +1221,40 @@ static const char *dt_name_from_class(uint8_t class, uint8_t subclass,
  */
 
 static uint32_t drc_id_from_devfn(SpaprPhbState *phb,
-                                  uint32_t busnr,
-                                  int32_t devfn)
+                                  uint8_t chassis, int32_t devfn)
 {
-    return (phb->index << 16) | (busnr << 8) | devfn;
+    return (phb->index << 16) | (chassis << 8) | devfn;
 }
 
 static SpaprDrc *drc_from_devfn(SpaprPhbState *phb,
-                                uint32_t busnr, int32_t devfn)
+                                uint8_t chassis, int32_t devfn)
 {
     return spapr_drc_by_id(TYPE_SPAPR_DRC_PCI,
-                           drc_id_from_devfn(phb, busnr, devfn));
+                           drc_id_from_devfn(phb, chassis, devfn));
+}
+
+static uint8_t chassis_from_bus(PCIBus *bus, Error **errp)
+{
+    if (pci_bus_is_root(bus)) {
+        return 0;
+    } else {
+        PCIDevice *bridge = pci_bridge_get_device(bus);
+
+        return object_property_get_uint(OBJECT(bridge), "chassis_nr", errp);
+    }
 }
 
 static SpaprDrc *drc_from_dev(SpaprPhbState *phb, PCIDevice *dev)
 {
-    uint32_t busnr = pci_bus_num(PCI_BUS(qdev_get_parent_bus(DEVICE(dev))));
-    return drc_from_devfn(phb, busnr, dev->devfn);
+    Error *local_err = NULL;
+    uint8_t chassis = chassis_from_bus(pci_get_bus(dev), &local_err);
+
+    if (local_err) {
+        error_report_err(local_err);
+        return NULL;
+    }
+
+    return drc_from_devfn(phb, chassis, dev->devfn);
 }
 
 static void add_drcs(SpaprPhbState *phb)
@@ -1516,14 +1533,19 @@ static void spapr_pci_plug(HotplugHandler *plug_handler,
         spapr_drc_reset(drc);
     } else if (PCI_FUNC(pdev->devfn) == 0) {
         int i;
+        uint8_t chassis = chassis_from_bus(pci_get_bus(pdev), &local_err);
+
+        if (local_err) {
+            error_propagate(errp, local_err);
+            return;
+        }
 
         for (i = 0; i < 8; i++) {
             SpaprDrc *func_drc;
             SpaprDrcClass *func_drck;
             SpaprDREntitySense state;
 
-            func_drc = drc_from_devfn(phb, pci_bus_num(bus),
-                                      PCI_DEVFN(slotnr, i));
+            func_drc = drc_from_devfn(phb, chassis, PCI_DEVFN(slotnr, i));
             func_drck = SPAPR_DR_CONNECTOR_GET_CLASS(func_drc);
             state = func_drck->dr_entity_sense(func_drc);
 
@@ -1571,18 +1593,23 @@ static void spapr_pci_unplug_request(HotplugHandler *plug_handler,
     g_assert(drc->dev == plugged_dev);
 
     if (!spapr_drc_unplug_requested(drc)) {
-        PCIBus *bus = PCI_BUS(qdev_get_parent_bus(DEVICE(pdev)));
         uint32_t slotnr = PCI_SLOT(pdev->devfn);
         SpaprDrc *func_drc;
         SpaprDrcClass *func_drck;
         SpaprDREntitySense state;
         int i;
+        Error *local_err = NULL;
+        uint8_t chassis = chassis_from_bus(pci_get_bus(pdev), &local_err);
+
+        if (local_err) {
+            error_propagate(errp, local_err);
+            return;
+        }
 
         /* ensure any other present functions are pending unplug */
         if (PCI_FUNC(pdev->devfn) == 0) {
             for (i = 1; i < 8; i++) {
-                func_drc = drc_from_devfn(phb, pci_bus_num(bus),
-                                          PCI_DEVFN(slotnr, i));
+                func_drc = drc_from_devfn(phb, chassis, PCI_DEVFN(slotnr, i));
                 func_drck = SPAPR_DR_CONNECTOR_GET_CLASS(func_drc);
                 state = func_drck->dr_entity_sense(func_drc);
                 if (state == SPAPR_DR_ENTITY_SENSE_PRESENT
@@ -1603,8 +1630,7 @@ static void spapr_pci_unplug_request(HotplugHandler *plug_handler,
          */
         if (PCI_FUNC(pdev->devfn) == 0) {
             for (i = 7; i >= 0; i--) {
-                func_drc = drc_from_devfn(phb, pci_bus_num(bus),
-                                          PCI_DEVFN(slotnr, i));
+                func_drc = drc_from_devfn(phb, chassis, PCI_DEVFN(slotnr, i));
                 func_drck = SPAPR_DR_CONNECTOR_GET_CLASS(func_drc);
                 state = func_drck->dr_entity_sense(func_drc);
                 if (state == SPAPR_DR_ENTITY_SENSE_PRESENT) {
-- 
2.21.0



^ permalink raw reply related	[flat|nested] 11+ messages in thread

* [Qemu-devel] [PATCH v2 7/8] spapr: Direct all PCI hotplug to host bridge, rather than P2P bridge
  2019-05-30  5:38 [Qemu-devel] [PATCH v2 0/8] pseries: Allow hotplug of P2P bridges and devices under P2P bridges David Gibson
                   ` (5 preceding siblings ...)
  2019-05-30  5:38 ` [Qemu-devel] [PATCH v2 6/8] spapr: Don't use bus number for building DRC ids David Gibson
@ 2019-05-30  5:38 ` David Gibson
  2019-05-30  5:38 ` [Qemu-devel] [PATCH v2 8/8] spapr: Allow hot plug/unplug of PCI bridges and devices under PCI bridges David Gibson
  2019-06-03  5:04 ` [Qemu-devel] [PATCH v2 0/8] pseries: Allow hotplug of P2P bridges and devices under P2P bridges David Gibson
  8 siblings, 0 replies; 11+ messages in thread
From: David Gibson @ 2019-05-30  5:38 UTC (permalink / raw)
  To: qemu-devel, qemu-ppc; +Cc: mdroth, mst, groug, David Gibson

A P2P bridge will attempt to handle the hotplug with SHPC, which doesn't
work in the PAPR environment.  Instead we want to direct all PCI hotplug
actions to the PAPR specific host bridge which will use the PAPR hotplug
mechanism.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
---
 hw/ppc/spapr.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
index 507fd50dd5..6dd8aaac33 100644
--- a/hw/ppc/spapr.c
+++ b/hw/ppc/spapr.c
@@ -4094,6 +4094,17 @@ static HotplugHandler *spapr_get_hotplug_handler(MachineState *machine,
         object_dynamic_cast(OBJECT(dev), TYPE_SPAPR_PCI_HOST_BRIDGE)) {
         return HOTPLUG_HANDLER(machine);
     }
+    if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_DEVICE)) {
+        PCIDevice *pcidev = PCI_DEVICE(dev);
+        PCIBus *root = pci_device_root_bus(pcidev);
+        SpaprPhbState *phb =
+            (SpaprPhbState *)object_dynamic_cast(OBJECT(BUS(root)->parent),
+                                                 TYPE_SPAPR_PCI_HOST_BRIDGE);
+
+        if (phb) {
+            return HOTPLUG_HANDLER(phb);
+        }
+    }
     return NULL;
 }
 
-- 
2.21.0



^ permalink raw reply related	[flat|nested] 11+ messages in thread

* [Qemu-devel] [PATCH v2 8/8] spapr: Allow hot plug/unplug of PCI bridges and devices under PCI bridges
  2019-05-30  5:38 [Qemu-devel] [PATCH v2 0/8] pseries: Allow hotplug of P2P bridges and devices under P2P bridges David Gibson
                   ` (6 preceding siblings ...)
  2019-05-30  5:38 ` [Qemu-devel] [PATCH v2 7/8] spapr: Direct all PCI hotplug to host bridge, rather than P2P bridge David Gibson
@ 2019-05-30  5:38 ` David Gibson
  2019-06-03  5:04 ` [Qemu-devel] [PATCH v2 0/8] pseries: Allow hotplug of P2P bridges and devices under P2P bridges David Gibson
  8 siblings, 0 replies; 11+ messages in thread
From: David Gibson @ 2019-05-30  5:38 UTC (permalink / raw)
  To: qemu-devel, qemu-ppc; +Cc: mdroth, mst, groug, David Gibson

The pseries machine type already allows PCI hotplug and unplug via the
PAPR mechanism, but only on the root bus of each PHB.  This patch extends
this to allow PCI to PCI bridges to be hotplugged, and devices to be
hotplugged or unplugged under P2P bridges.

For now we disallow hot unplugging P2P bridges.  I tried doing that, but
haven't managed to get it working, I think due to some guest side problems
that need further investigation.

To do this we dynamically construct DRCs when bridges are hot (or cold)
added, which can in turn be used to hotplug devices under the bridge.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
---
 hw/ppc/spapr_pci.c | 115 ++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 102 insertions(+), 13 deletions(-)

diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
index 513b70f9ad..ab2a21db35 100644
--- a/hw/ppc/spapr_pci.c
+++ b/hw/ppc/spapr_pci.c
@@ -1257,30 +1257,53 @@ static SpaprDrc *drc_from_dev(SpaprPhbState *phb, PCIDevice *dev)
     return drc_from_devfn(phb, chassis, dev->devfn);
 }
 
-static void add_drcs(SpaprPhbState *phb)
+static void add_drcs(SpaprPhbState *phb, PCIBus *bus, Error **errp)
 {
+    Object *owner;
     int i;
+    uint8_t chassis;
+    Error *local_err = NULL;
 
     if (!phb->dr_enabled) {
         return;
     }
 
+    chassis = chassis_from_bus(bus, &local_err);
+    if (local_err) {
+        error_propagate(errp, local_err);
+        return;
+    }
+
+    if (pci_bus_is_root(bus)) {
+        owner = OBJECT(phb);
+    } else {
+        owner = OBJECT(pci_bridge_get_device(bus));
+    }
+
     for (i = 0; i < PCI_SLOT_MAX * PCI_FUNC_MAX; i++) {
-        spapr_dr_connector_new(OBJECT(phb), TYPE_SPAPR_DRC_PCI,
-                               drc_id_from_devfn(phb, 0, i));
+        spapr_dr_connector_new(owner, TYPE_SPAPR_DRC_PCI,
+                               drc_id_from_devfn(phb, chassis, i));
     }
 }
 
-static void remove_drcs(SpaprPhbState *phb)
+static void remove_drcs(SpaprPhbState *phb, PCIBus *bus, Error **errp)
 {
     int i;
+    uint8_t chassis;
+    Error *local_err = NULL;
 
     if (!phb->dr_enabled) {
         return;
     }
 
+    chassis = chassis_from_bus(bus, &local_err);
+    if (local_err) {
+        error_propagate(errp, local_err);
+        return;
+    }
+
     for (i = PCI_SLOT_MAX * PCI_FUNC_MAX - 1; i >= 0; i--) {
-        SpaprDrc *drc = drc_from_devfn(phb, 0, i);
+        SpaprDrc *drc = drc_from_devfn(phb, chassis, i);
 
         if (drc) {
             object_unparent(OBJECT(drc));
@@ -1325,6 +1348,7 @@ static int spapr_dt_pci_bus(SpaprPhbState *sphb, PCIBus *bus,
         .sphb = sphb,
         .err = 0,
     };
+    int ret;
 
     _FDT(fdt_setprop_cell(fdt, offset, "#address-cells",
                           RESOURCE_CELLS_ADDRESS));
@@ -1339,6 +1363,12 @@ static int spapr_dt_pci_bus(SpaprPhbState *sphb, PCIBus *bus,
         }
     }
 
+    ret = spapr_dt_drc(fdt, offset, OBJECT(bus->parent_dev),
+                       SPAPR_DR_CONNECTOR_TYPE_PCI);
+    if (ret) {
+        return ret;
+    }
+
     return offset;
 }
 
@@ -1483,11 +1513,26 @@ int spapr_pci_dt_populate(SpaprDrc *drc, SpaprMachineState *spapr,
     return 0;
 }
 
+static void spapr_pci_bridge_plug(SpaprPhbState *phb,
+                                  PCIBridge *bridge,
+                                  Error **errp)
+{
+    Error *local_err = NULL;
+    PCIBus *bus = pci_bridge_get_sec_bus(bridge);
+
+    add_drcs(phb, bus, &local_err);
+    if (local_err) {
+        error_propagate(errp, local_err);
+        return;
+    }
+}
+
 static void spapr_pci_plug(HotplugHandler *plug_handler,
                            DeviceState *plugged_dev, Error **errp)
 {
     SpaprPhbState *phb = SPAPR_PCI_HOST_BRIDGE(DEVICE(plug_handler));
     PCIDevice *pdev = PCI_DEVICE(plugged_dev);
+    PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(plugged_dev);
     SpaprDrc *drc = drc_from_dev(phb, pdev);
     Error *local_err = NULL;
     PCIBus *bus = PCI_BUS(qdev_get_parent_bus(DEVICE(pdev)));
@@ -1509,6 +1554,14 @@ static void spapr_pci_plug(HotplugHandler *plug_handler,
 
     g_assert(drc);
 
+    if (pc->is_bridge) {
+        spapr_pci_bridge_plug(phb, PCI_BRIDGE(plugged_dev), &local_err);
+        if (local_err) {
+            error_propagate(errp, local_err);
+            return;
+        }
+    }
+
     /* Following the QEMU convention used for PCIe multifunction
      * hotplug, we do not allow functions to be hotplugged to a
      * slot that already has function 0 present
@@ -1559,9 +1612,26 @@ out:
     error_propagate(errp, local_err);
 }
 
+static void spapr_pci_bridge_unplug(SpaprPhbState *phb,
+                                    PCIBridge *bridge,
+                                    Error **errp)
+{
+    Error *local_err = NULL;
+    PCIBus *bus = pci_bridge_get_sec_bus(bridge);
+
+    remove_drcs(phb, bus, &local_err);
+    if (local_err) {
+        error_propagate(errp, local_err);
+        return;
+    }
+}
+
 static void spapr_pci_unplug(HotplugHandler *plug_handler,
                              DeviceState *plugged_dev, Error **errp)
 {
+    PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(plugged_dev);
+    SpaprPhbState *phb = SPAPR_PCI_HOST_BRIDGE(DEVICE(plug_handler));
+
     /* some version guests do not wait for completion of a device
      * cleanup (generally done asynchronously by the kernel) before
      * signaling to QEMU that the device is safe, but instead sleep
@@ -1573,6 +1643,16 @@ static void spapr_pci_unplug(HotplugHandler *plug_handler,
      * an 'idle' state, as the device cleanup code expects.
      */
     pci_device_reset(PCI_DEVICE(plugged_dev));
+
+    if (pc->is_bridge) {
+        Error *local_err = NULL;
+        spapr_pci_bridge_unplug(phb, PCI_BRIDGE(plugged_dev), &local_err);
+        if (local_err) {
+            error_propagate(errp, local_err);
+        }
+        return;
+    }
+
     object_property_set_bool(OBJECT(plugged_dev), false, "realized", NULL);
 }
 
@@ -1593,6 +1673,7 @@ static void spapr_pci_unplug_request(HotplugHandler *plug_handler,
     g_assert(drc->dev == plugged_dev);
 
     if (!spapr_drc_unplug_requested(drc)) {
+        PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(plugged_dev);
         uint32_t slotnr = PCI_SLOT(pdev->devfn);
         SpaprDrc *func_drc;
         SpaprDrcClass *func_drck;
@@ -1606,6 +1687,10 @@ static void spapr_pci_unplug_request(HotplugHandler *plug_handler,
             return;
         }
 
+        if (pc->is_bridge) {
+            error_setg(errp, "PCI: Hot unplug of PCI bridges not supported");
+        }
+
         /* ensure any other present functions are pending unplug */
         if (PCI_FUNC(pdev->devfn) == 0) {
             for (i = 1; i < 8; i++) {
@@ -1658,6 +1743,7 @@ static void spapr_phb_unrealize(DeviceState *dev, Error **errp)
     SpaprTceTable *tcet;
     int i;
     const unsigned windows_supported = spapr_phb_windows_supported(sphb);
+    Error *local_err = NULL;
 
     spapr_phb_nvgpu_free(sphb);
 
@@ -1678,7 +1764,11 @@ static void spapr_phb_unrealize(DeviceState *dev, Error **errp)
         }
     }
 
-    remove_drcs(sphb);
+    remove_drcs(sphb, phb->bus, &local_err);
+    if (local_err) {
+        error_propagate(errp, local_err);
+        return;
+    }
 
     for (i = PCI_NUM_PINS - 1; i >= 0; i--) {
         if (sphb->lsi_table[i].irq) {
@@ -1743,6 +1833,7 @@ static void spapr_phb_realize(DeviceState *dev, Error **errp)
     uint64_t msi_window_size = 4096;
     SpaprTceTable *tcet;
     const unsigned windows_supported = spapr_phb_windows_supported(sphb);
+    Error *local_err = NULL;
 
     if (!spapr) {
         error_setg(errp, TYPE_SPAPR_PCI_HOST_BRIDGE " needs a pseries machine");
@@ -1879,7 +1970,6 @@ static void spapr_phb_realize(DeviceState *dev, Error **errp)
     /* Initialize the LSI table */
     for (i = 0; i < PCI_NUM_PINS; i++) {
         uint32_t irq = SPAPR_IRQ_PCI_LSI + sphb->index * PCI_NUM_PINS + i;
-        Error *local_err = NULL;
 
         if (smc->legacy_irq_allocation) {
             irq = spapr_irq_findone(spapr, &local_err);
@@ -1904,7 +1994,11 @@ static void spapr_phb_realize(DeviceState *dev, Error **errp)
     }
 
     /* allocate connectors for child PCI devices */
-    add_drcs(sphb);
+    add_drcs(sphb, phb->bus, &local_err);
+    if (local_err) {
+        error_propagate(errp, local_err);
+        goto unrealize;
+    }
 
     /* DMA setup */
     for (i = 0; i < windows_supported; ++i) {
@@ -2320,11 +2414,6 @@ int spapr_dt_phb(SpaprPhbState *phb, uint32_t intc_phandle, void *fdt,
         return ret;
     }
 
-    ret = spapr_dt_drc(fdt, bus_off, OBJECT(phb), SPAPR_DR_CONNECTOR_TYPE_PCI);
-    if (ret) {
-        return ret;
-    }
-
     spapr_phb_nvgpu_populate_dt(phb, fdt, bus_off, &errp);
     if (errp) {
         error_report_err(errp);
-- 
2.21.0



^ permalink raw reply related	[flat|nested] 11+ messages in thread

* Re: [Qemu-devel] [PATCH v2 3/8] spapr: Clean up dt creation for PCI buses
  2019-05-30  5:38 ` [Qemu-devel] [PATCH v2 3/8] spapr: Clean up dt creation for PCI buses David Gibson
@ 2019-05-31  4:45   ` Alexey Kardashevskiy
  0 siblings, 0 replies; 11+ messages in thread
From: Alexey Kardashevskiy @ 2019-05-31  4:45 UTC (permalink / raw)
  To: David Gibson, qemu-devel, qemu-ppc; +Cc: mdroth, groug, mst



On 30/05/2019 15:38, David Gibson wrote:
> Device nodes for PCI bridges (both host and P2P) describe both the bridge
> device itself and the bus hanging off it, handling of this is a bit of a
> mess.
> 
> spapr_dt_pci_device() has a few things it only adds for non-bridges, but
> always adds #address-cells and #size-cells which should only appear for
> bridges.  But the walking down the subordinate PCI bus is done in one of
> its callers spapr_populate_pci_devices_dt().  The PHB dt creation in
> spapr_populate_pci_dt() open codes some similar logic to the bridge case.
> 
> This patch consolidates things in a bunch of ways:
>  * Bus specific dt info is now created in spapr_dt_pci_bus() used for both
>    P2P bridges and the host bridge.  This includes walking subordinate
>    devices
>  * spapr_dt_pci_device() now calls spapr_dt_pci_bus() when called on a
>    P2P bridge
>  * We do detection of bridges with the is_bridge field of the device class,
>    rather than checking PCI config space directly, for consistency with
>    qemu's core PCI code.
>  * Several things are renamed for brevity and clarity
> 
> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
> Acked-by: Michael S. Tsirkin <mst@redhat.com>
> ---
>  hw/ppc/spapr.c              |   7 +-
>  hw/ppc/spapr_pci.c          | 140 +++++++++++++++++++-----------------
>  include/hw/pci-host/spapr.h |   4 +-
>  3 files changed, 79 insertions(+), 72 deletions(-)
> 
> diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
> index e2b33e5890..44573adce7 100644
> --- a/hw/ppc/spapr.c
> +++ b/hw/ppc/spapr.c
> @@ -1309,8 +1309,7 @@ static void *spapr_build_fdt(SpaprMachineState *spapr)
>      }
>  
>      QLIST_FOREACH(phb, &spapr->phbs, list) {
> -        ret = spapr_populate_pci_dt(phb, PHANDLE_INTC, fdt,
> -                                    spapr->irq->nr_msis, NULL);
> +        ret = spapr_dt_phb(phb, PHANDLE_INTC, fdt, spapr->irq->nr_msis, NULL);
>          if (ret < 0) {
>              error_report("couldn't setup PCI devices in fdt");
>              exit(1);
> @@ -3917,8 +3916,8 @@ int spapr_phb_dt_populate(SpaprDrc *drc, SpaprMachineState *spapr,
>          return -1;
>      }
>  
> -    if (spapr_populate_pci_dt(sphb, intc_phandle, fdt, spapr->irq->nr_msis,
> -                              fdt_start_offset)) {
> +    if (spapr_dt_phb(sphb, intc_phandle, fdt, spapr->irq->nr_msis,
> +                     fdt_start_offset)) {
>          error_setg(errp, "unable to create FDT node for PHB %d", sphb->index);
>          return -1;
>      }
> diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
> index 5b038ef071..08537c8c85 100644
> --- a/hw/ppc/spapr_pci.c
> +++ b/hw/ppc/spapr_pci.c
> @@ -1219,6 +1219,60 @@ static const char *dt_name_from_class(uint8_t class, uint8_t subclass,
>  static uint32_t spapr_phb_get_pci_drc_index(SpaprPhbState *phb,
>                                              PCIDevice *pdev);
>  
> +typedef struct PciWalkFdt {
> +    void *fdt;
> +    int offset;
> +    SpaprPhbState *sphb;
> +    int err;
> +} PciWalkFdt;
> +
> +static int spapr_dt_pci_device(SpaprPhbState *sphb, PCIDevice *dev,
> +                               void *fdt, int parent_offset);
> +
> +static void spapr_dt_pci_device_cb(PCIBus *bus, PCIDevice *pdev,
> +                                   void *opaque)
> +{
> +    PciWalkFdt *p = opaque;
> +    int err;
> +
> +    if (p->err) {
> +        /* Something's already broken, don't keep going */
> +        return;
> +    }
> +
> +    err = spapr_dt_pci_device(p->sphb, pdev, p->fdt, p->offset);
> +    if (err < 0) {
> +        p->err = err;
> +    }
> +}
> +
> +/* Augment PCI device node with bridge specific information */
> +static int spapr_dt_pci_bus(SpaprPhbState *sphb, PCIBus *bus,
> +                               void *fdt, int offset)
> +{
> +    PciWalkFdt cbinfo = {
> +        .fdt = fdt,
> +        .offset = offset,
> +        .sphb = sphb,
> +        .err = 0,
> +    };
> +
> +    _FDT(fdt_setprop_cell(fdt, offset, "#address-cells",
> +                          RESOURCE_CELLS_ADDRESS));
> +    _FDT(fdt_setprop_cell(fdt, offset, "#size-cells",
> +                          RESOURCE_CELLS_SIZE));
> +
> +    if (bus) {
> +        pci_for_each_device_reverse(bus, pci_bus_num(bus),
> +                                    spapr_dt_pci_device_cb, &cbinfo);
> +        if (cbinfo.err) {
> +            return cbinfo.err;
> +        }
> +    }
> +
> +    return offset;


Returning 0 still makes more sense but whatever as...

> +}
> +
>  /* create OF node for pci device and required OF DT properties */
>  static int spapr_dt_pci_device(SpaprPhbState *sphb, PCIDevice *dev,
>                                 void *fdt, int parent_offset)
> @@ -1228,10 +1282,9 @@ static int spapr_dt_pci_device(SpaprPhbState *sphb, PCIDevice *dev,
>      gchar *nodename;
>      int slot = PCI_SLOT(dev->devfn);
>      int func = PCI_FUNC(dev->devfn);
> +    PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(dev);
>      ResourceProps rp;
>      uint32_t drc_index = spapr_phb_get_pci_drc_index(sphb, dev);
> -    uint32_t header_type = pci_default_read_config(dev, PCI_HEADER_TYPE, 1);
> -    bool is_bridge = (header_type == PCI_HEADER_TYPE_BRIDGE);
>      uint32_t vendor_id = pci_default_read_config(dev, PCI_VENDOR_ID, 2);
>      uint32_t device_id = pci_default_read_config(dev, PCI_DEVICE_ID, 2);
>      uint32_t revision_id = pci_default_read_config(dev, PCI_REVISION_ID, 1);
> @@ -1268,13 +1321,6 @@ static int spapr_dt_pci_device(SpaprPhbState *sphb, PCIDevice *dev,
>          _FDT(fdt_setprop_cell(fdt, offset, "interrupts", irq_pin));
>      }
>  
> -    if (!is_bridge) {
> -        uint32_t min_grant = pci_default_read_config(dev, PCI_MIN_GNT, 1);
> -        uint32_t max_latency = pci_default_read_config(dev, PCI_MAX_LAT, 1);
> -        _FDT(fdt_setprop_cell(fdt, offset, "min-grant", min_grant));
> -        _FDT(fdt_setprop_cell(fdt, offset, "max-latency", max_latency));
> -    }
> -
>      if (subsystem_id) {
>          _FDT(fdt_setprop_cell(fdt, offset, "subsystem-id", subsystem_id));
>      }
> @@ -1309,11 +1355,6 @@ static int spapr_dt_pci_device(SpaprPhbState *sphb, PCIDevice *dev,
>          _FDT(fdt_setprop_cell(fdt, offset, "ibm,my-drc-index", drc_index));
>      }
>  
> -    _FDT(fdt_setprop_cell(fdt, offset, "#address-cells",
> -                          RESOURCE_CELLS_ADDRESS));
> -    _FDT(fdt_setprop_cell(fdt, offset, "#size-cells",
> -                          RESOURCE_CELLS_SIZE));
> -
>      if (msi_present(dev)) {
>          uint32_t max_msi = msi_nr_vectors_allocated(dev);
>          if (max_msi) {
> @@ -1338,7 +1379,18 @@ static int spapr_dt_pci_device(SpaprPhbState *sphb, PCIDevice *dev,
>  
>      spapr_phb_nvgpu_populate_pcidev_dt(dev, fdt, offset, sphb);
>  
> -    return offset;
> +    if (!pc->is_bridge) {
> +        /* Properties only for non-bridges */
> +        uint32_t min_grant = pci_default_read_config(dev, PCI_MIN_GNT, 1);
> +        uint32_t max_latency = pci_default_read_config(dev, PCI_MAX_LAT, 1);
> +        _FDT(fdt_setprop_cell(fdt, offset, "min-grant", min_grant));
> +        _FDT(fdt_setprop_cell(fdt, offset, "max-latency", max_latency));
> +        return offset;
> +    } else {
> +        PCIBus *sec_bus = pci_bridge_get_sec_bus(PCI_BRIDGE(dev));
> +
> +        return spapr_dt_pci_bus(sphb, sec_bus, fdt, offset);
> +    }
>  }
>  
>  /* Callback to be called during DRC release. */
> @@ -2063,44 +2115,6 @@ static const TypeInfo spapr_phb_info = {
>      }
>  };
>  
> -typedef struct SpaprFdt {
> -    void *fdt;
> -    int node_off;
> -    SpaprPhbState *sphb;
> -} SpaprFdt;
> -
> -static void spapr_populate_pci_devices_dt(PCIBus *bus, PCIDevice *pdev,
> -                                          void *opaque)
> -{
> -    PCIBus *sec_bus;
> -    SpaprFdt *p = opaque;
> -    int offset;
> -    SpaprFdt s_fdt;
> -
> -    offset = spapr_dt_pci_device(p->sphb, pdev, p->fdt, p->node_off);
> -    if (!offset) {
> -        error_report("Failed to create pci child device tree node");
> -        return;
> -    }
> -
> -    if ((pci_default_read_config(pdev, PCI_HEADER_TYPE, 1) !=
> -         PCI_HEADER_TYPE_BRIDGE)) {
> -        return;
> -    }
> -
> -    sec_bus = pci_bridge_get_sec_bus(PCI_BRIDGE(pdev));
> -    if (!sec_bus) {
> -        return;
> -    }
> -
> -    s_fdt.fdt = p->fdt;
> -    s_fdt.node_off = offset;
> -    s_fdt.sphb = p->sphb;
> -    pci_for_each_device_reverse(sec_bus, pci_bus_num(sec_bus),
> -                                spapr_populate_pci_devices_dt,
> -                                &s_fdt);
> -}
> -
>  static void spapr_phb_pci_enumerate_bridge(PCIBus *bus, PCIDevice *pdev,
>                                             void *opaque)
>  {
> @@ -2138,8 +2152,8 @@ static void spapr_phb_pci_enumerate(SpaprPhbState *phb)
>  
>  }
>  
> -int spapr_populate_pci_dt(SpaprPhbState *phb, uint32_t intc_phandle, void *fdt,
> -                          uint32_t nr_msis, int *node_offset)
> +int spapr_dt_phb(SpaprPhbState *phb, uint32_t intc_phandle, void *fdt,
> +                 uint32_t nr_msis, int *node_offset)
>  {
>      int bus_off, i, j, ret;
>      uint32_t bus_range[] = { cpu_to_be32(0), cpu_to_be32(0xff) };
> @@ -2186,8 +2200,6 @@ int spapr_populate_pci_dt(SpaprPhbState *phb, uint32_t intc_phandle, void *fdt,
>                                  cpu_to_be32(0x0),
>                                  cpu_to_be32(phb->numa_node)};
>      SpaprTceTable *tcet;
> -    PCIBus *bus = PCI_HOST_BRIDGE(phb)->bus;
> -    SpaprFdt s_fdt;
>      SpaprDrc *drc;
>      Error *errp = NULL;
>  
> @@ -2200,8 +2212,6 @@ int spapr_populate_pci_dt(SpaprPhbState *phb, uint32_t intc_phandle, void *fdt,
>      /* Write PHB properties */
>      _FDT(fdt_setprop_string(fdt, bus_off, "device_type", "pci"));
>      _FDT(fdt_setprop_string(fdt, bus_off, "compatible", "IBM,Logical_PHB"));
> -    _FDT(fdt_setprop_cell(fdt, bus_off, "#address-cells", 0x3));
> -    _FDT(fdt_setprop_cell(fdt, bus_off, "#size-cells", 0x2));
>      _FDT(fdt_setprop_cell(fdt, bus_off, "#interrupt-cells", 0x1));
>      _FDT(fdt_setprop(fdt, bus_off, "used-by-rtas", NULL, 0));
>      _FDT(fdt_setprop(fdt, bus_off, "bus-range", &bus_range, sizeof(bus_range)));
> @@ -2266,13 +2276,11 @@ int spapr_populate_pci_dt(SpaprPhbState *phb, uint32_t intc_phandle, void *fdt,
>      spapr_phb_pci_enumerate(phb);
>      _FDT(fdt_setprop_cell(fdt, bus_off, "qemu,phb-enumerated", 0x1));
>  
> -    /* Populate tree nodes with PCI devices attached */
> -    s_fdt.fdt = fdt;
> -    s_fdt.node_off = bus_off;
> -    s_fdt.sphb = phb;
> -    pci_for_each_device_reverse(bus, pci_bus_num(bus),
> -                                spapr_populate_pci_devices_dt,
> -                                &s_fdt);
> +    /* Walk the bridge and subordinate buses */
> +    ret = spapr_dt_pci_bus(phb, PCI_HOST_BRIDGE(phb)->bus, fdt, bus_off);
> +    if (ret) {


...this is still broken, should be ret<0.


> +        return ret;
> +    }
>  
>      ret = spapr_drc_populate_dt(fdt, bus_off, OBJECT(phb),
>                                  SPAPR_DR_CONNECTOR_TYPE_PCI);
> diff --git a/include/hw/pci-host/spapr.h b/include/hw/pci-host/spapr.h
> index 53519c835e..1b61162f91 100644
> --- a/include/hw/pci-host/spapr.h
> +++ b/include/hw/pci-host/spapr.h
> @@ -131,8 +131,8 @@ static inline qemu_irq spapr_phb_lsi_qirq(struct SpaprPhbState *phb, int pin)
>      return spapr_qirq(spapr, phb->lsi_table[pin].irq);
>  }
>  
> -int spapr_populate_pci_dt(SpaprPhbState *phb, uint32_t intc_phandle, void *fdt,
> -                          uint32_t nr_msis, int *node_offset);
> +int spapr_dt_phb(SpaprPhbState *phb, uint32_t intc_phandle, void *fdt,
> +                 uint32_t nr_msis, int *node_offset);
>  
>  void spapr_pci_rtas_init(void);
>  
> 

-- 
Alexey


^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [Qemu-devel] [PATCH v2 0/8] pseries: Allow hotplug of P2P bridges and devices under P2P bridges
  2019-05-30  5:38 [Qemu-devel] [PATCH v2 0/8] pseries: Allow hotplug of P2P bridges and devices under P2P bridges David Gibson
                   ` (7 preceding siblings ...)
  2019-05-30  5:38 ` [Qemu-devel] [PATCH v2 8/8] spapr: Allow hot plug/unplug of PCI bridges and devices under PCI bridges David Gibson
@ 2019-06-03  5:04 ` David Gibson
  8 siblings, 0 replies; 11+ messages in thread
From: David Gibson @ 2019-06-03  5:04 UTC (permalink / raw)
  To: qemu-devel, qemu-ppc; +Cc: mdroth, groug, mst

[-- Attachment #1: Type: text/plain, Size: 2110 bytes --]

On Thu, May 30, 2019 at 03:38:23PM +1000, David Gibson wrote:
> PAPR has its own PCI hotplug mechanism which we implemented quite a
> while ago.  However, we weren't able to hotplug devices under PCI
> bridges, because the pci-bridge code would try to handle the hotplug
> using SHPC which won't work with PAPR.
> 
> We now have the infrastructure in the hotplug core to have the machine
> take control of the hotplug before the bus tries to claim it, which
> lets us address this.  While we're about it, make a bunch of cleanups
> and also allow hot plug of P2P bridges themselves (this turns out to
> be quite straightforward once the rest is in place).
> 
> For now, we don't support hot unplug of bridges - this seems to cause
> problems, at least for a Linux guest.  I suspect the problem is on the
> guest side, but for now just prohibit until we have time to
> investigate properly.

I've fixed the problem Alexey pointed out, and I've merged this
tentatively to the ppc-for-4.1 branch.

> 
> Changes since v1:
>  * Added proper cover letter
>  * Addressed some minor comments
> 
> David Gibson (8):
>   spapr: Clean up device node name generation for PCI devices
>   spapr: Clean up device tree construction for PCI devices
>   spapr: Clean up dt creation for PCI buses
>   spapr: Clean up spapr_drc_populate_dt()
>   spapr: Clean up DRC index construction
>   spapr: Don't use bus number for building DRC ids
>   spapr: Direct all PCI hotplug to host bridge, rather than P2P bridge
>   spapr: Allow hot plug/unplug of PCI bridges and devices under PCI
>     bridges
> 
>  hw/ppc/spapr.c              |  25 +-
>  hw/ppc/spapr_drc.c          |  13 +-
>  hw/ppc/spapr_pci.c          | 486 ++++++++++++++++++++++--------------
>  include/hw/pci-host/spapr.h |   4 +-
>  include/hw/ppc/spapr_drc.h  |   3 +-
>  5 files changed, 327 insertions(+), 204 deletions(-)
> 

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, other threads:[~2019-06-03  7:01 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-30  5:38 [Qemu-devel] [PATCH v2 0/8] pseries: Allow hotplug of P2P bridges and devices under P2P bridges David Gibson
2019-05-30  5:38 ` [Qemu-devel] [PATCH v2 1/8] spapr: Clean up device node name generation for PCI devices David Gibson
2019-05-30  5:38 ` [Qemu-devel] [PATCH v2 2/8] spapr: Clean up device tree construction " David Gibson
2019-05-30  5:38 ` [Qemu-devel] [PATCH v2 3/8] spapr: Clean up dt creation for PCI buses David Gibson
2019-05-31  4:45   ` Alexey Kardashevskiy
2019-05-30  5:38 ` [Qemu-devel] [PATCH v2 4/8] spapr: Clean up spapr_drc_populate_dt() David Gibson
2019-05-30  5:38 ` [Qemu-devel] [PATCH v2 5/8] spapr: Clean up DRC index construction David Gibson
2019-05-30  5:38 ` [Qemu-devel] [PATCH v2 6/8] spapr: Don't use bus number for building DRC ids David Gibson
2019-05-30  5:38 ` [Qemu-devel] [PATCH v2 7/8] spapr: Direct all PCI hotplug to host bridge, rather than P2P bridge David Gibson
2019-05-30  5:38 ` [Qemu-devel] [PATCH v2 8/8] spapr: Allow hot plug/unplug of PCI bridges and devices under PCI bridges David Gibson
2019-06-03  5:04 ` [Qemu-devel] [PATCH v2 0/8] pseries: Allow hotplug of P2P bridges and devices under P2P bridges David Gibson

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.