From: Dalon Westergreen <dalon.westergreen@linux.intel.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 1/2] Makefile: Add target to generate hex output for combined spl and dtb
Date: Mon, 3 Jun 2019 16:57:17 -0700 [thread overview]
Message-ID: <20190603235718.28381-1-dalon.westergreen@linux.intel.com> (raw)
From: Dalon Westergreen <dalon.westergreen@intel.com>
Some architectures, Stratix10, require a hex formatted spl that combines
the spl image and dtb. This adds a target to create said hex file with
and offset of SPL_TEXT_BASE.
Signed-off-by: Dalon Westergreen <dalon.westergreen@intel.com>
---
Changes in v2:
-> Move spl hex file generation to SPL Makefile
-> Create hexfile from $(SPL_BIN).bin which will include the dtb
ifneq(build_dtb,)
---
Makefile | 9 ++++-----
scripts/Makefile.spl | 8 ++++++++
2 files changed, 12 insertions(+), 5 deletions(-)
diff --git a/Makefile b/Makefile
index 07106138e9..12e36ebb72 100644
--- a/Makefile
+++ b/Makefile
@@ -1124,11 +1124,6 @@ OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
$(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec) \
$(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR),-R .bootpg -R .resetvec)
-OBJCOPYFLAGS_u-boot-spl.hex = $(OBJCOPYFLAGS_u-boot.hex)
-
-spl/u-boot-spl.hex: spl/u-boot-spl FORCE
- $(call if_changed,objcopy)
-
binary_size_check: u-boot-nodtb.bin FORCE
@file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \
map_size=$(shell cat u-boot.map | \
@@ -1707,6 +1702,10 @@ u-boot.lds: $(LDSCRIPT) prepare FORCE
spl/u-boot-spl.bin: spl/u-boot-spl
@:
+
+spl/u-boot-spl.hex: spl/u-boot-spl
+ @:
+
spl/u-boot-spl: tools prepare \
$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) \
$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_TPL_OF_PLATDATA),dts/dt.dtb)
diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index 7af6b120b6..419bb6e222 100644
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -216,6 +216,8 @@ ifneq ($(CONFIG_TARGET_SOCFPGA_GEN5)$(CONFIG_TARGET_SOCFPGA_ARRIA10),)
ALL-y += $(obj)/$(SPL_BIN).sfp
endif
+ALL-$(CONFIG_TARGET_SOCFPGA_STRATIX10) += $(obj)/$(SPL_BIN).hex
+
ifdef CONFIG_ARCH_SUNXI
ALL-y += $(obj)/sunxi-spl.bin
@@ -363,6 +365,11 @@ endif
$(obj)/$(SPL_BIN).sfp: $(obj)/$(SPL_BIN).bin FORCE
$(call if_changed,mkimage)
+OBJCOPYFLAGS_$(SPL_BIN).hex := -I binary -O ihex --change-address=$(CONFIG_SPL_TEXT_BASE)
+
+$(obj)/$(SPL_BIN).hex: $(obj)/u-boot-spl.bin FORCE
+ $(call if_changed,objcopy)
+
quiet_cmd_mksunxiboot = MKSUNXI $@
cmd_mksunxiboot = $(objtree)/tools/mksunxiboot \
--default-dt $(CONFIG_DEFAULT_DEVICE_TREE) $< $@
@@ -463,3 +470,4 @@ ifdef CONFIG_ARCH_K3
tispl.bin: $(obj)/u-boot-spl-nodtb.bin $(SHRUNK_ARCH_DTB) $(SPL_ITS) FORCE
$(call if_changed,mkfitimage)
endif
+
--
2.21.0
next reply other threads:[~2019-06-03 23:57 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-03 23:57 Dalon Westergreen [this message]
2019-06-03 23:57 ` [U-Boot] [PATCH v2 2/2] ARM: socfpga: stratix10: Remove CONFIG_OF_EMBED Dalon Westergreen
2019-06-04 5:13 ` Simon Goldschmidt
2019-06-04 5:58 ` See, Chin Liang
2019-06-04 6:12 ` Simon Goldschmidt
2019-06-04 16:10 ` Dalon L Westergreen
2019-06-04 18:15 ` Tom Rini
2019-06-04 18:34 ` Simon Goldschmidt
2019-06-04 0:00 ` [U-Boot] [PATCH v2 1/2] Makefile: Add target to generate hex output for combined spl and dtb Marek Vasut
2019-06-04 3:12 ` Dalon L Westergreen
2019-06-04 11:20 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190603235718.28381-1-dalon.westergreen@linux.intel.com \
--to=dalon.westergreen@linux.intel.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.