From: Dan Murphy <dmurphy@ti.com> To: jacek.anaszewski@gmail.com, pavel@ucw.cz, broonie@kernel.org, lgirdwood@gmail.com Cc: lee.jones@linaro.org, linux-leds@vger.kernel.org, linux-kernel@vger.kernel.org, Dan Murphy <dmurphy@ti.com> Subject: [PATCH v6 0/5] LM36274 Introduction Date: Wed, 5 Jun 2019 07:56:29 -0500 [thread overview] Message-ID: <20190605125634.7042-1-dmurphy@ti.com> (raw) Hello The v5 patchset missed adding in the new validation code. Patch 1 of the v5 series was squashed into patch 4 of the v5 series. So this will reduce the patchset by 1. Sorry for the extra noise on the patchsets. The change was lost when I converted the patches from the mainline branch to the LED branch. This change was made on top of the branch repo: https://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds.git branch: ti-lmu-led-drivers Dan Murphy (5): dt-bindings: mfd: Add lm36274 bindings to ti-lmu mfd: ti-lmu: Add LM36274 support to the ti-lmu regulator: lm363x: Add support for LM36274 dt-bindings: leds: Add LED bindings for the LM36274 leds: lm36274: Introduce the TI LM36274 LED driver .../devicetree/bindings/leds/leds-lm36274.txt | 82 +++++++++ .../devicetree/bindings/mfd/ti-lmu.txt | 54 ++++++ drivers/leds/Kconfig | 8 + drivers/leds/Makefile | 1 + drivers/leds/leds-lm36274.c | 174 ++++++++++++++++++ drivers/mfd/Kconfig | 5 +- drivers/mfd/ti-lmu.c | 14 ++ drivers/regulator/Kconfig | 2 +- drivers/regulator/lm363x-regulator.c | 78 +++++++- include/linux/mfd/ti-lmu-register.h | 23 +++ include/linux/mfd/ti-lmu.h | 4 + 11 files changed, 437 insertions(+), 8 deletions(-) create mode 100644 Documentation/devicetree/bindings/leds/leds-lm36274.txt create mode 100644 drivers/leds/leds-lm36274.c -- 2.21.0.5.gaeb582a983
WARNING: multiple messages have this Message-ID (diff)
From: Dan Murphy <dmurphy@ti.com> To: <jacek.anaszewski@gmail.com>, <pavel@ucw.cz>, <broonie@kernel.org>, <lgirdwood@gmail.com> Cc: <lee.jones@linaro.org>, <linux-leds@vger.kernel.org>, <linux-kernel@vger.kernel.org>, Dan Murphy <dmurphy@ti.com> Subject: [PATCH v6 0/5] LM36274 Introduction Date: Wed, 5 Jun 2019 07:56:29 -0500 [thread overview] Message-ID: <20190605125634.7042-1-dmurphy@ti.com> (raw) Hello The v5 patchset missed adding in the new validation code. Patch 1 of the v5 series was squashed into patch 4 of the v5 series. So this will reduce the patchset by 1. Sorry for the extra noise on the patchsets. The change was lost when I converted the patches from the mainline branch to the LED branch. This change was made on top of the branch repo: https://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds.git branch: ti-lmu-led-drivers Dan Murphy (5): dt-bindings: mfd: Add lm36274 bindings to ti-lmu mfd: ti-lmu: Add LM36274 support to the ti-lmu regulator: lm363x: Add support for LM36274 dt-bindings: leds: Add LED bindings for the LM36274 leds: lm36274: Introduce the TI LM36274 LED driver .../devicetree/bindings/leds/leds-lm36274.txt | 82 +++++++++ .../devicetree/bindings/mfd/ti-lmu.txt | 54 ++++++ drivers/leds/Kconfig | 8 + drivers/leds/Makefile | 1 + drivers/leds/leds-lm36274.c | 174 ++++++++++++++++++ drivers/mfd/Kconfig | 5 +- drivers/mfd/ti-lmu.c | 14 ++ drivers/regulator/Kconfig | 2 +- drivers/regulator/lm363x-regulator.c | 78 +++++++- include/linux/mfd/ti-lmu-register.h | 23 +++ include/linux/mfd/ti-lmu.h | 4 + 11 files changed, 437 insertions(+), 8 deletions(-) create mode 100644 Documentation/devicetree/bindings/leds/leds-lm36274.txt create mode 100644 drivers/leds/leds-lm36274.c -- 2.21.0.5.gaeb582a983
next reply other threads:[~2019-06-05 12:56 UTC|newest] Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-06-05 12:56 Dan Murphy [this message] 2019-06-05 12:56 ` [PATCH v6 0/5] LM36274 Introduction Dan Murphy 2019-06-05 12:56 ` [PATCH v6 1/5] dt-bindings: mfd: Add lm36274 bindings to ti-lmu Dan Murphy 2019-06-05 12:56 ` Dan Murphy 2019-06-05 12:56 ` [PATCH v6 2/5] mfd: ti-lmu: Add LM36274 support to the ti-lmu Dan Murphy 2019-06-05 12:56 ` Dan Murphy 2019-06-06 9:52 ` Pavel Machek 2019-06-05 12:56 ` [PATCH v6 3/5] regulator: lm363x: Add support for LM36274 Dan Murphy 2019-06-05 12:56 ` Dan Murphy 2019-06-05 18:17 ` Mark Brown 2019-06-06 9:53 ` Pavel Machek 2019-06-05 12:56 ` [PATCH v6 4/5] dt-bindings: leds: Add LED bindings for the LM36274 Dan Murphy 2019-06-05 12:56 ` Dan Murphy 2019-06-06 10:01 ` Pavel Machek 2019-06-05 12:56 ` [PATCH v6 5/5] leds: lm36274: Introduce the TI LM36274 LED driver Dan Murphy 2019-06-05 12:56 ` Dan Murphy 2019-06-06 10:07 ` Pavel Machek 2019-06-06 10:07 ` Pavel Machek 2019-06-06 11:25 ` Dan Murphy 2019-06-06 11:25 ` Dan Murphy 2019-06-05 19:31 ` [PATCH v6 0/5] LM36274 Introduction Jacek Anaszewski 2019-06-11 12:17 ` Dan Murphy 2019-06-11 12:17 ` Dan Murphy 2019-06-24 14:42 ` Lee Jones 2019-06-24 17:20 ` Dan Murphy 2019-06-24 17:20 ` Dan Murphy 2019-06-25 6:30 ` Lee Jones
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190605125634.7042-1-dmurphy@ti.com \ --to=dmurphy@ti.com \ --cc=broonie@kernel.org \ --cc=jacek.anaszewski@gmail.com \ --cc=lee.jones@linaro.org \ --cc=lgirdwood@gmail.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-leds@vger.kernel.org \ --cc=pavel@ucw.cz \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.