From: Vladimir Oltean <olteanv@gmail.com> To: shawnguo@kernel.org Cc: leoyang.li@nxp.com, robh+dt@kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, Vladimir Oltean <olteanv@gmail.com> Subject: [PATCH v4] ARM: dts: Introduce the NXP LS1021A-TSN board Date: Fri, 7 Jun 2019 01:28:17 +0300 [thread overview] Message-ID: <20190606222817.14223-1-olteanv@gmail.com> (raw) The LS1021A-TSN is a development board built by VVDN/Argonboards in partnership with NXP. It features the LS1021A SoC and the first-generation SJA1105T Ethernet switch for prototyping implementations of a subset of IEEE 802.1 TSN standards. It has two regular Ethernet ports and four switched, TSN-capable ports. It also features: - One Arduino header - One expansion header - Two USB 3.0 ports - One mini PCIe slot - One SATA interface - Accelerometer, gyroscope, temperature sensors Signed-off-by: Vladimir Oltean <olteanv@gmail.com> --- Changes from v3: - Not all nodes were alphabetically sorted ("d->i->e" vs "d->e->i") Changes from v2: - Sorted nodes alphabetically - Renamed SAI2 codec node into audio-codec v2 patch available at: https://lkml.org/lkml/2019/5/29/998 Changes from v1: - Applied Shawn's feedback - Introduced QSPI flash node v1 patch available at: https://patchwork.kernel.org/patch/10930451/ arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/ls1021a-tsn.dts | 289 ++++++++++++++++++++++++++++++ 2 files changed, 290 insertions(+) create mode 100644 arch/arm/boot/dts/ls1021a-tsn.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index dab2914fa293..a4eb4ca5e148 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -602,6 +602,7 @@ dtb-$(CONFIG_SOC_IMX7ULP) += \ dtb-$(CONFIG_SOC_LS1021A) += \ ls1021a-moxa-uc-8410a.dtb \ ls1021a-qds.dtb \ + ls1021a-tsn.dtb \ ls1021a-twr.dtb dtb-$(CONFIG_SOC_VF610) += \ vf500-colibri-eval-v3.dtb \ diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts new file mode 100644 index 000000000000..5b7689094b70 --- /dev/null +++ b/arch/arm/boot/dts/ls1021a-tsn.dts @@ -0,0 +1,289 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright 2016-2018 NXP Semiconductors + * Copyright 2019 Vladimir Oltean <olteanv@gmail.com> + */ + +/dts-v1/; +#include "ls1021a.dtsi" + +/ { + model = "NXP LS1021A-TSN Board"; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + reg_vdda_codec: regulator-3V3 { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vddio_codec: regulator-2V5 { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; +}; + +&dspi0 { + bus-num = <0>; + status = "okay"; + + /* ADG704BRMZ 1:4 SPI mux/demux */ + sja1105: ethernet-switch@1 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,sja1105t"; + /* 12 MHz */ + spi-max-frequency = <12000000>; + /* Sample data on trailing clock edge */ + spi-cpha; + /* SPI controller settings for SJA1105 timing requirements */ + fsl,spi-cs-sck-delay = <1000>; + fsl,spi-sck-cs-delay = <1000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + /* ETH5 written on chassis */ + label = "swp5"; + phy-handle = <&rgmii_phy6>; + phy-mode = "rgmii-id"; + reg = <0>; + }; + + port@1 { + /* ETH2 written on chassis */ + label = "swp2"; + phy-handle = <&rgmii_phy3>; + phy-mode = "rgmii-id"; + reg = <1>; + }; + + port@2 { + /* ETH3 written on chassis */ + label = "swp3"; + phy-handle = <&rgmii_phy4>; + phy-mode = "rgmii-id"; + reg = <2>; + }; + + port@3 { + /* ETH4 written on chassis */ + label = "swp4"; + phy-handle = <&rgmii_phy5>; + phy-mode = "rgmii-id"; + reg = <3>; + }; + + port@4 { + /* Internal port connected to eth2 */ + ethernet = <&enet2>; + phy-mode = "rgmii"; + reg = <4>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; +}; + +&enet0 { + tbi-handle = <&tbi0>; + phy-handle = <&sgmii_phy2>; + phy-mode = "sgmii"; + status = "okay"; +}; + +&enet1 { + tbi-handle = <&tbi1>; + phy-handle = <&sgmii_phy1>; + phy-mode = "sgmii"; + status = "okay"; +}; + +/* RGMII delays added via PCB traces */ +&enet2 { + phy-mode = "rgmii"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&esdhc { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + /* 3 axis accelerometer */ + accelerometer@1e { + compatible = "fsl,fxls8471"; + position = <0>; + reg = <0x1e>; + }; + + /* Audio codec (SAI2) */ + audio-codec@2a { + compatible = "fsl,sgtl5000"; + VDDIO-supply = <®_vddio_codec>; + VDDA-supply = <®_vdda_codec>; + #sound-dai-cells = <0>; + clocks = <&sys_mclk>; + reg = <0x2a>; + }; + + /* Current sensing circuit for 1V VDDCORE PMIC rail */ + current-sensor@44 { + compatible = "ti,ina220"; + shunt-resistor = <1000>; + reg = <0x44>; + }; + + /* Current sensing circuit for 12V VCC rail */ + current-sensor@45 { + compatible = "ti,ina220"; + shunt-resistor = <1000>; + reg = <0x45>; + }; + + /* Thermal monitor - case */ + temperature-sensor@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + /* Thermal monitor - chip */ + temperature-sensor@4c { + compatible = "ti,tmp451"; + reg = <0x4c>; + }; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + }; + + /* Unsupported devices: + * - FXAS21002C Gyroscope at 0x20 + * - TI ADS7924 4-channel ADC at 0x49 + */ +}; + +&ifc { + status = "disabled"; +}; + +&lpuart0 { + status = "okay"; +}; + +&lpuart3 { + status = "okay"; +}; + +&mdio0 { + /* AR8031 */ + sgmii_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + /* AR8031 */ + sgmii_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + /* BCM5464 quad PHY */ + rgmii_phy3: ethernet-phy@3 { + reg = <0x3>; + }; + + rgmii_phy4: ethernet-phy@4 { + reg = <0x4>; + }; + + rgmii_phy5: ethernet-phy@5 { + reg = <0x5>; + }; + + rgmii_phy6: ethernet-phy@6 { + reg = <0x6>; + }; + + /* SGMII PCS for enet0 */ + tbi0: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&mdio1 { + /* SGMII PCS for enet1 */ + tbi1: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&qspi { + status = "okay"; + + flash@0 { + /* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */ + compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s"; + spi-max-frequency = <20000000>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "RCW"; + reg = <0x0 0x40000>; + }; + + partition@40000 { + label = "U-Boot"; + reg = <0x40000 0x300000>; + }; + + partition@340000 { + label = "U-Boot Env"; + reg = <0x340000 0x100000>; + }; + }; + }; +}; + +&sai2 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Vladimir Oltean <olteanv@gmail.com> To: shawnguo@kernel.org Cc: devicetree@vger.kernel.org, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, leoyang.li@nxp.com, robh+dt@kernel.org, Vladimir Oltean <olteanv@gmail.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH v4] ARM: dts: Introduce the NXP LS1021A-TSN board Date: Fri, 7 Jun 2019 01:28:17 +0300 [thread overview] Message-ID: <20190606222817.14223-1-olteanv@gmail.com> (raw) The LS1021A-TSN is a development board built by VVDN/Argonboards in partnership with NXP. It features the LS1021A SoC and the first-generation SJA1105T Ethernet switch for prototyping implementations of a subset of IEEE 802.1 TSN standards. It has two regular Ethernet ports and four switched, TSN-capable ports. It also features: - One Arduino header - One expansion header - Two USB 3.0 ports - One mini PCIe slot - One SATA interface - Accelerometer, gyroscope, temperature sensors Signed-off-by: Vladimir Oltean <olteanv@gmail.com> --- Changes from v3: - Not all nodes were alphabetically sorted ("d->i->e" vs "d->e->i") Changes from v2: - Sorted nodes alphabetically - Renamed SAI2 codec node into audio-codec v2 patch available at: https://lkml.org/lkml/2019/5/29/998 Changes from v1: - Applied Shawn's feedback - Introduced QSPI flash node v1 patch available at: https://patchwork.kernel.org/patch/10930451/ arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/ls1021a-tsn.dts | 289 ++++++++++++++++++++++++++++++ 2 files changed, 290 insertions(+) create mode 100644 arch/arm/boot/dts/ls1021a-tsn.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index dab2914fa293..a4eb4ca5e148 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -602,6 +602,7 @@ dtb-$(CONFIG_SOC_IMX7ULP) += \ dtb-$(CONFIG_SOC_LS1021A) += \ ls1021a-moxa-uc-8410a.dtb \ ls1021a-qds.dtb \ + ls1021a-tsn.dtb \ ls1021a-twr.dtb dtb-$(CONFIG_SOC_VF610) += \ vf500-colibri-eval-v3.dtb \ diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts new file mode 100644 index 000000000000..5b7689094b70 --- /dev/null +++ b/arch/arm/boot/dts/ls1021a-tsn.dts @@ -0,0 +1,289 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright 2016-2018 NXP Semiconductors + * Copyright 2019 Vladimir Oltean <olteanv@gmail.com> + */ + +/dts-v1/; +#include "ls1021a.dtsi" + +/ { + model = "NXP LS1021A-TSN Board"; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + reg_vdda_codec: regulator-3V3 { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vddio_codec: regulator-2V5 { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; +}; + +&dspi0 { + bus-num = <0>; + status = "okay"; + + /* ADG704BRMZ 1:4 SPI mux/demux */ + sja1105: ethernet-switch@1 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,sja1105t"; + /* 12 MHz */ + spi-max-frequency = <12000000>; + /* Sample data on trailing clock edge */ + spi-cpha; + /* SPI controller settings for SJA1105 timing requirements */ + fsl,spi-cs-sck-delay = <1000>; + fsl,spi-sck-cs-delay = <1000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + /* ETH5 written on chassis */ + label = "swp5"; + phy-handle = <&rgmii_phy6>; + phy-mode = "rgmii-id"; + reg = <0>; + }; + + port@1 { + /* ETH2 written on chassis */ + label = "swp2"; + phy-handle = <&rgmii_phy3>; + phy-mode = "rgmii-id"; + reg = <1>; + }; + + port@2 { + /* ETH3 written on chassis */ + label = "swp3"; + phy-handle = <&rgmii_phy4>; + phy-mode = "rgmii-id"; + reg = <2>; + }; + + port@3 { + /* ETH4 written on chassis */ + label = "swp4"; + phy-handle = <&rgmii_phy5>; + phy-mode = "rgmii-id"; + reg = <3>; + }; + + port@4 { + /* Internal port connected to eth2 */ + ethernet = <&enet2>; + phy-mode = "rgmii"; + reg = <4>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; +}; + +&enet0 { + tbi-handle = <&tbi0>; + phy-handle = <&sgmii_phy2>; + phy-mode = "sgmii"; + status = "okay"; +}; + +&enet1 { + tbi-handle = <&tbi1>; + phy-handle = <&sgmii_phy1>; + phy-mode = "sgmii"; + status = "okay"; +}; + +/* RGMII delays added via PCB traces */ +&enet2 { + phy-mode = "rgmii"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&esdhc { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + /* 3 axis accelerometer */ + accelerometer@1e { + compatible = "fsl,fxls8471"; + position = <0>; + reg = <0x1e>; + }; + + /* Audio codec (SAI2) */ + audio-codec@2a { + compatible = "fsl,sgtl5000"; + VDDIO-supply = <®_vddio_codec>; + VDDA-supply = <®_vdda_codec>; + #sound-dai-cells = <0>; + clocks = <&sys_mclk>; + reg = <0x2a>; + }; + + /* Current sensing circuit for 1V VDDCORE PMIC rail */ + current-sensor@44 { + compatible = "ti,ina220"; + shunt-resistor = <1000>; + reg = <0x44>; + }; + + /* Current sensing circuit for 12V VCC rail */ + current-sensor@45 { + compatible = "ti,ina220"; + shunt-resistor = <1000>; + reg = <0x45>; + }; + + /* Thermal monitor - case */ + temperature-sensor@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + /* Thermal monitor - chip */ + temperature-sensor@4c { + compatible = "ti,tmp451"; + reg = <0x4c>; + }; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + }; + + /* Unsupported devices: + * - FXAS21002C Gyroscope at 0x20 + * - TI ADS7924 4-channel ADC at 0x49 + */ +}; + +&ifc { + status = "disabled"; +}; + +&lpuart0 { + status = "okay"; +}; + +&lpuart3 { + status = "okay"; +}; + +&mdio0 { + /* AR8031 */ + sgmii_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + /* AR8031 */ + sgmii_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + /* BCM5464 quad PHY */ + rgmii_phy3: ethernet-phy@3 { + reg = <0x3>; + }; + + rgmii_phy4: ethernet-phy@4 { + reg = <0x4>; + }; + + rgmii_phy5: ethernet-phy@5 { + reg = <0x5>; + }; + + rgmii_phy6: ethernet-phy@6 { + reg = <0x6>; + }; + + /* SGMII PCS for enet0 */ + tbi0: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&mdio1 { + /* SGMII PCS for enet1 */ + tbi1: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&qspi { + status = "okay"; + + flash@0 { + /* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */ + compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s"; + spi-max-frequency = <20000000>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "RCW"; + reg = <0x0 0x40000>; + }; + + partition@40000 { + label = "U-Boot"; + reg = <0x40000 0x300000>; + }; + + partition@340000 { + label = "U-Boot Env"; + reg = <0x340000 0x100000>; + }; + }; + }; +}; + +&sai2 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-06-06 22:28 UTC|newest] Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-06-06 22:28 Vladimir Oltean [this message] 2019-06-06 22:28 ` [PATCH v4] ARM: dts: Introduce the NXP LS1021A-TSN board Vladimir Oltean 2019-06-13 2:34 ` Shawn Guo 2019-06-13 2:34 ` Shawn Guo 2019-06-13 2:34 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190606222817.14223-1-olteanv@gmail.com \ --to=olteanv@gmail.com \ --cc=devicetree@vger.kernel.org \ --cc=leoyang.li@nxp.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=netdev@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.