[PATCH v3 0/3] meson-gpio-irqc: Add support for the Meson-G12A SoC

[PATCH v3 0/3] meson-gpio-irqc: Add support for the Meson-G12A SoC

[Martin Blumenstingl]

This series adds GPIO interrupt controller support for Meson-G12A SoCs.
Although the total number of pins is the same as the Meson-AXG SoC, the
GPIO banks and IRQ numbers are different. Add a new compatible string
to avoid confusion when using it.

I am re-sending this update because v2 looked good in my opinion (Xingyu
Chen did good work here) but it never made it into mainline.


Changes since v1 at [1]:
- share the device data with Meson-AXG

Changes since v2 at [2]:
- dropped "Change-Id" from patch #2
- added .dts patch #3 - this should go through Kevin's linux-amlogic
  tree. if required I can re-send it in a separate series


[1] https://lore.kernel.org/lkml/20181203061324.36248-1-xingyu.chen@amlogic.com
[2] https://lore.kernel.org/patchwork/cover/1021232/


Martin Blumenstingl (1):
  arm64: dts: meson: g12a: add the GPIO interrupt controller

Xingyu Chen (2):
  dt-bindings: interrupt-controller: New binding for Meson-G12A SoC
  irqchip/meson-gpio: Add support for Meson-G12A SoC

 .../interrupt-controller/amlogic,meson-gpio-intc.txt     | 1 +
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi              | 9 +++++++++
 drivers/irqchip/irq-meson-gpio.c                         | 1 +
 3 files changed, 11 insertions(+)

-- 
2.21.0

[PATCH v3 0/3] meson-gpio-irqc: Add support for the Meson-G12A SoC

[Martin Blumenstingl]

This series adds GPIO interrupt controller support for Meson-G12A SoCs.
Although the total number of pins is the same as the Meson-AXG SoC, the
GPIO banks and IRQ numbers are different. Add a new compatible string
to avoid confusion when using it.

I am re-sending this update because v2 looked good in my opinion (Xingyu
Chen did good work here) but it never made it into mainline.


Changes since v1 at [1]:
- share the device data with Meson-AXG

Changes since v2 at [2]:
- dropped "Change-Id" from patch #2
- added .dts patch #3 - this should go through Kevin's linux-amlogic
  tree. if required I can re-send it in a separate series


[1] https://lore.kernel.org/lkml/20181203061324.36248-1-xingyu.chen@amlogic.com
[2] https://lore.kernel.org/patchwork/cover/1021232/


Martin Blumenstingl (1):
  arm64: dts: meson: g12a: add the GPIO interrupt controller

Xingyu Chen (2):
  dt-bindings: interrupt-controller: New binding for Meson-G12A SoC
  irqchip/meson-gpio: Add support for Meson-G12A SoC

 .../interrupt-controller/amlogic,meson-gpio-intc.txt     | 1 +
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi              | 9 +++++++++
 drivers/irqchip/irq-meson-gpio.c                         | 1 +
 3 files changed, 11 insertions(+)

-- 
2.21.0

[PATCH v3 0/3] meson-gpio-irqc: Add support for the Meson-G12A SoC

[Martin Blumenstingl]

This series adds GPIO interrupt controller support for Meson-G12A SoCs.
Although the total number of pins is the same as the Meson-AXG SoC, the
GPIO banks and IRQ numbers are different. Add a new compatible string
to avoid confusion when using it.

I am re-sending this update because v2 looked good in my opinion (Xingyu
Chen did good work here) but it never made it into mainline.


Changes since v1 at [1]:
- share the device data with Meson-AXG

Changes since v2 at [2]:
- dropped "Change-Id" from patch #2
- added .dts patch #3 - this should go through Kevin's linux-amlogic
  tree. if required I can re-send it in a separate series


[1] https://lore.kernel.org/lkml/20181203061324.36248-1-xingyu.chen@amlogic.com
[2] https://lore.kernel.org/patchwork/cover/1021232/


Martin Blumenstingl (1):
  arm64: dts: meson: g12a: add the GPIO interrupt controller

Xingyu Chen (2):
  dt-bindings: interrupt-controller: New binding for Meson-G12A SoC
  irqchip/meson-gpio: Add support for Meson-G12A SoC

 .../interrupt-controller/amlogic,meson-gpio-intc.txt     | 1 +
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi              | 9 +++++++++
 drivers/irqchip/irq-meson-gpio.c                         | 1 +
 3 files changed, 11 insertions(+)

-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 0/3] meson-gpio-irqc: Add support for the Meson-G12A SoC

[Martin Blumenstingl]

This series adds GPIO interrupt controller support for Meson-G12A SoCs.
Although the total number of pins is the same as the Meson-AXG SoC, the
GPIO banks and IRQ numbers are different. Add a new compatible string
to avoid confusion when using it.

I am re-sending this update because v2 looked good in my opinion (Xingyu
Chen did good work here) but it never made it into mainline.


Changes since v1 at [1]:
- share the device data with Meson-AXG

Changes since v2 at [2]:
- dropped "Change-Id" from patch #2
- added .dts patch #3 - this should go through Kevin's linux-amlogic
  tree. if required I can re-send it in a separate series


[1] https://lore.kernel.org/lkml/20181203061324.36248-1-xingyu.chen@amlogic.com
[2] https://lore.kernel.org/patchwork/cover/1021232/


Martin Blumenstingl (1):
  arm64: dts: meson: g12a: add the GPIO interrupt controller

Xingyu Chen (2):
  dt-bindings: interrupt-controller: New binding for Meson-G12A SoC
  irqchip/meson-gpio: Add support for Meson-G12A SoC

 .../interrupt-controller/amlogic,meson-gpio-intc.txt     | 1 +
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi              | 9 +++++++++
 drivers/irqchip/irq-meson-gpio.c                         | 1 +
 3 files changed, 11 insertions(+)

-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH v3 1/3] dt-bindings: interrupt-controller: New binding for Meson-G12A SoC

[Martin Blumenstingl]

From: Xingyu Chen <xingyu.chen@amlogic.com>

Update the dt-binding document to support new compatible string for the
GPIO interrupt controller which found in Amlogic's Meson-G12A SoC.

Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 .../bindings/interrupt-controller/amlogic,meson-gpio-intc.txt    | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
index 1502a51548bb..7d531d5fff29 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
@@ -15,6 +15,7 @@ Required properties:
     "amlogic,meson-gxbb-gpio-intc" for GXBB SoCs (S905) or
     "amlogic,meson-gxl-gpio-intc" for GXL SoCs (S905X, S912)
     "amlogic,meson-axg-gpio-intc" for AXG SoCs (A113D, A113X)
+    "amlogic,meson-g12a-gpio-intc" for G12A SoCs (S905D2, S905X2, S905Y2)
 - reg : Specifies base physical address and size of the registers.
 - interrupt-controller : Identifies the node as an interrupt controller.
 - #interrupt-cells : Specifies the number of cells needed to encode an
-- 
2.21.0

[PATCH v3 1/3] dt-bindings: interrupt-controller: New binding for Meson-G12A SoC

[Martin Blumenstingl]

From: Xingyu Chen <xingyu.chen@amlogic.com>

Update the dt-binding document to support new compatible string for the
GPIO interrupt controller which found in Amlogic's Meson-G12A SoC.

Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 .../bindings/interrupt-controller/amlogic,meson-gpio-intc.txt    | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
index 1502a51548bb..7d531d5fff29 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
@@ -15,6 +15,7 @@ Required properties:
     "amlogic,meson-gxbb-gpio-intc" for GXBB SoCs (S905) or
     "amlogic,meson-gxl-gpio-intc" for GXL SoCs (S905X, S912)
     "amlogic,meson-axg-gpio-intc" for AXG SoCs (A113D, A113X)
+    "amlogic,meson-g12a-gpio-intc" for G12A SoCs (S905D2, S905X2, S905Y2)
 - reg : Specifies base physical address and size of the registers.
 - interrupt-controller : Identifies the node as an interrupt controller.
 - #interrupt-cells : Specifies the number of cells needed to encode an
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 1/3] dt-bindings: interrupt-controller: New binding for Meson-G12A SoC

[Martin Blumenstingl]

From: Xingyu Chen <xingyu.chen@amlogic.com>

Update the dt-binding document to support new compatible string for the
GPIO interrupt controller which found in Amlogic's Meson-G12A SoC.

Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 .../bindings/interrupt-controller/amlogic,meson-gpio-intc.txt    | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
index 1502a51548bb..7d531d5fff29 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
@@ -15,6 +15,7 @@ Required properties:
     "amlogic,meson-gxbb-gpio-intc" for GXBB SoCs (S905) or
     "amlogic,meson-gxl-gpio-intc" for GXL SoCs (S905X, S912)
     "amlogic,meson-axg-gpio-intc" for AXG SoCs (A113D, A113X)
+    "amlogic,meson-g12a-gpio-intc" for G12A SoCs (S905D2, S905X2, S905Y2)
 - reg : Specifies base physical address and size of the registers.
 - interrupt-controller : Identifies the node as an interrupt controller.
 - #interrupt-cells : Specifies the number of cells needed to encode an
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH v3 2/3] irqchip/meson-gpio: Add support for Meson-G12A SoC

[Martin Blumenstingl]

From: Xingyu Chen <xingyu.chen@amlogic.com>

The Meson-G12A SoC uses the same GPIO interrupt controller IP block as the
other Meson SoCs, A totle of 100 pins can be spied on, which is the sum of:

- 223:100 undefined (no interrupt)
- 99:97   3 pins on bank GPIOE
- 96:77   20 pins on bank GPIOX
- 76:61   16 pins on bank GPIOA
- 60:53   8 pins on bank GPIOC
- 52:37   16 pins on bank BOOT
- 36:28   9 pins on bank GPIOH
- 27:12   16 pins on bank GPIOZ
- 11:0    12 pins in the AO domain

Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/irqchip/irq-meson-gpio.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/irqchip/irq-meson-gpio.c b/drivers/irqchip/irq-meson-gpio.c
index 7b531fd075b8..7599b10ecf09 100644
--- a/drivers/irqchip/irq-meson-gpio.c
+++ b/drivers/irqchip/irq-meson-gpio.c
@@ -73,6 +73,7 @@ static const struct of_device_id meson_irq_gpio_matches[] = {
 	{ .compatible = "amlogic,meson-gxbb-gpio-intc", .data = &gxbb_params },
 	{ .compatible = "amlogic,meson-gxl-gpio-intc", .data = &gxl_params },
 	{ .compatible = "amlogic,meson-axg-gpio-intc", .data = &axg_params },
+	{ .compatible = "amlogic,meson-g12a-gpio-intc", .data = &axg_params },
 	{ }
 };
 
-- 
2.21.0

[PATCH v3 2/3] irqchip/meson-gpio: Add support for Meson-G12A SoC

[Martin Blumenstingl]

From: Xingyu Chen <xingyu.chen@amlogic.com>

The Meson-G12A SoC uses the same GPIO interrupt controller IP block as the
other Meson SoCs, A totle of 100 pins can be spied on, which is the sum of:

- 223:100 undefined (no interrupt)
- 99:97   3 pins on bank GPIOE
- 96:77   20 pins on bank GPIOX
- 76:61   16 pins on bank GPIOA
- 60:53   8 pins on bank GPIOC
- 52:37   16 pins on bank BOOT
- 36:28   9 pins on bank GPIOH
- 27:12   16 pins on bank GPIOZ
- 11:0    12 pins in the AO domain

Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/irqchip/irq-meson-gpio.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/irqchip/irq-meson-gpio.c b/drivers/irqchip/irq-meson-gpio.c
index 7b531fd075b8..7599b10ecf09 100644
--- a/drivers/irqchip/irq-meson-gpio.c
+++ b/drivers/irqchip/irq-meson-gpio.c
@@ -73,6 +73,7 @@ static const struct of_device_id meson_irq_gpio_matches[] = {
 	{ .compatible = "amlogic,meson-gxbb-gpio-intc", .data = &gxbb_params },
 	{ .compatible = "amlogic,meson-gxl-gpio-intc", .data = &gxl_params },
 	{ .compatible = "amlogic,meson-axg-gpio-intc", .data = &axg_params },
+	{ .compatible = "amlogic,meson-g12a-gpio-intc", .data = &axg_params },
 	{ }
 };
 
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 2/3] irqchip/meson-gpio: Add support for Meson-G12A SoC

[Martin Blumenstingl]

From: Xingyu Chen <xingyu.chen@amlogic.com>

The Meson-G12A SoC uses the same GPIO interrupt controller IP block as the
other Meson SoCs, A totle of 100 pins can be spied on, which is the sum of:

- 223:100 undefined (no interrupt)
- 99:97   3 pins on bank GPIOE
- 96:77   20 pins on bank GPIOX
- 76:61   16 pins on bank GPIOA
- 60:53   8 pins on bank GPIOC
- 52:37   16 pins on bank BOOT
- 36:28   9 pins on bank GPIOH
- 27:12   16 pins on bank GPIOZ
- 11:0    12 pins in the AO domain

Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/irqchip/irq-meson-gpio.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/irqchip/irq-meson-gpio.c b/drivers/irqchip/irq-meson-gpio.c
index 7b531fd075b8..7599b10ecf09 100644
--- a/drivers/irqchip/irq-meson-gpio.c
+++ b/drivers/irqchip/irq-meson-gpio.c
@@ -73,6 +73,7 @@ static const struct of_device_id meson_irq_gpio_matches[] = {
 	{ .compatible = "amlogic,meson-gxbb-gpio-intc", .data = &gxbb_params },
 	{ .compatible = "amlogic,meson-gxl-gpio-intc", .data = &gxl_params },
 	{ .compatible = "amlogic,meson-axg-gpio-intc", .data = &axg_params },
+	{ .compatible = "amlogic,meson-g12a-gpio-intc", .data = &axg_params },
 	{ }
 };
 
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH v3 3/3] arm64: dts: meson: g12a: add the GPIO interrupt controller

[Martin Blumenstingl]

GPIO interrupts are used for the external Ethernet RGMII PHY interrupt
line.
Add the GPIO interrupt controller so we can describe that connection in
the dts files.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 6aec4cf87350..50fcdb3e55bb 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -2222,6 +2222,15 @@
 				#reset-cells = <1>;
 			};
 
+			gpio_intc: interrupt-controller@f080 {
+				compatible = "amlogic,meson-g12a-gpio-intc",
+					     "amlogic,meson-gpio-intc";
+				reg = <0x0 0xf080 0x0 0x10>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+			};
+
 			pwm_ef: pwm@19000 {
 				compatible = "amlogic,meson-g12a-ee-pwm";
 				reg = <0x0 0x19000 0x0 0x20>;
-- 
2.21.0

[PATCH v3 3/3] arm64: dts: meson: g12a: add the GPIO interrupt controller

[Martin Blumenstingl]

GPIO interrupts are used for the external Ethernet RGMII PHY interrupt
line.
Add the GPIO interrupt controller so we can describe that connection in
the dts files.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 6aec4cf87350..50fcdb3e55bb 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -2222,6 +2222,15 @@
 				#reset-cells = <1>;
 			};
 
+			gpio_intc: interrupt-controller@f080 {
+				compatible = "amlogic,meson-g12a-gpio-intc",
+					     "amlogic,meson-gpio-intc";
+				reg = <0x0 0xf080 0x0 0x10>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+			};
+
 			pwm_ef: pwm@19000 {
 				compatible = "amlogic,meson-g12a-ee-pwm";
 				reg = <0x0 0x19000 0x0 0x20>;
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 3/3] arm64: dts: meson: g12a: add the GPIO interrupt controller

[Martin Blumenstingl]

GPIO interrupts are used for the external Ethernet RGMII PHY interrupt
line.
Add the GPIO interrupt controller so we can describe that connection in
the dts files.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 6aec4cf87350..50fcdb3e55bb 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -2222,6 +2222,15 @@
 				#reset-cells = <1>;
 			};
 
+			gpio_intc: interrupt-controller@f080 {
+				compatible = "amlogic,meson-g12a-gpio-intc",
+					     "amlogic,meson-gpio-intc";
+				reg = <0x0 0xf080 0x0 0x10>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+			};
+
 			pwm_ef: pwm@19000 {
 				compatible = "amlogic,meson-g12a-ee-pwm";
 				reg = <0x0 0x19000 0x0 0x20>;
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH v3 0/3] meson-gpio-irqc: Add support for the Meson-G12A SoC

[Marc Zyngier]

On 08/06/2019 20:04, Martin Blumenstingl wrote:
> This series adds GPIO interrupt controller support for Meson-G12A SoCs.
> Although the total number of pins is the same as the Meson-AXG SoC, the
> GPIO banks and IRQ numbers are different. Add a new compatible string
> to avoid confusion when using it.
> 
> I am re-sending this update because v2 looked good in my opinion (Xingyu
> Chen did good work here) but it never made it into mainline.
> 
> 
> Changes since v1 at [1]:
> - share the device data with Meson-AXG
> 
> Changes since v2 at [2]:
> - dropped "Change-Id" from patch #2
> - added .dts patch #3 - this should go through Kevin's linux-amlogic
>   tree. if required I can re-send it in a separate series
> 
> 
> [1] https://lore.kernel.org/lkml/20181203061324.36248-1-xingyu.chen@amlogic.com
> [2] https://lore.kernel.org/patchwork/cover/1021232/
> 
> 
> Martin Blumenstingl (1):
>   arm64: dts: meson: g12a: add the GPIO interrupt controller
> 
> Xingyu Chen (2):
>   dt-bindings: interrupt-controller: New binding for Meson-G12A SoC
>   irqchip/meson-gpio: Add support for Meson-G12A SoC
> 
>  .../interrupt-controller/amlogic,meson-gpio-intc.txt     | 1 +
>  arch/arm64/boot/dts/amlogic/meson-g12a.dtsi              | 9 +++++++++
>  drivers/irqchip/irq-meson-gpio.c                         | 1 +
>  3 files changed, 11 insertions(+)
> 

I've taken patches 1 and 2 into the irqchip tree. Please route patch 3
though armsoc.

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...

Re: [PATCH v3 0/3] meson-gpio-irqc: Add support for the Meson-G12A SoC

[Marc Zyngier]

On 08/06/2019 20:04, Martin Blumenstingl wrote:
> This series adds GPIO interrupt controller support for Meson-G12A SoCs.
> Although the total number of pins is the same as the Meson-AXG SoC, the
> GPIO banks and IRQ numbers are different. Add a new compatible string
> to avoid confusion when using it.
> 
> I am re-sending this update because v2 looked good in my opinion (Xingyu
> Chen did good work here) but it never made it into mainline.
> 
> 
> Changes since v1 at [1]:
> - share the device data with Meson-AXG
> 
> Changes since v2 at [2]:
> - dropped "Change-Id" from patch #2
> - added .dts patch #3 - this should go through Kevin's linux-amlogic
>   tree. if required I can re-send it in a separate series
> 
> 
> [1] https://lore.kernel.org/lkml/20181203061324.36248-1-xingyu.chen@amlogic.com
> [2] https://lore.kernel.org/patchwork/cover/1021232/
> 
> 
> Martin Blumenstingl (1):
>   arm64: dts: meson: g12a: add the GPIO interrupt controller
> 
> Xingyu Chen (2):
>   dt-bindings: interrupt-controller: New binding for Meson-G12A SoC
>   irqchip/meson-gpio: Add support for Meson-G12A SoC
> 
>  .../interrupt-controller/amlogic,meson-gpio-intc.txt     | 1 +
>  arch/arm64/boot/dts/amlogic/meson-g12a.dtsi              | 9 +++++++++
>  drivers/irqchip/irq-meson-gpio.c                         | 1 +
>  3 files changed, 11 insertions(+)
> 

I've taken patches 1 and 2 into the irqchip tree. Please route patch 3
though armsoc.

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 0/3] meson-gpio-irqc: Add support for the Meson-G12A SoC

[Marc Zyngier]

On 08/06/2019 20:04, Martin Blumenstingl wrote:
> This series adds GPIO interrupt controller support for Meson-G12A SoCs.
> Although the total number of pins is the same as the Meson-AXG SoC, the
> GPIO banks and IRQ numbers are different. Add a new compatible string
> to avoid confusion when using it.
> 
> I am re-sending this update because v2 looked good in my opinion (Xingyu
> Chen did good work here) but it never made it into mainline.
> 
> 
> Changes since v1 at [1]:
> - share the device data with Meson-AXG
> 
> Changes since v2 at [2]:
> - dropped "Change-Id" from patch #2
> - added .dts patch #3 - this should go through Kevin's linux-amlogic
>   tree. if required I can re-send it in a separate series
> 
> 
> [1] https://lore.kernel.org/lkml/20181203061324.36248-1-xingyu.chen@amlogic.com
> [2] https://lore.kernel.org/patchwork/cover/1021232/
> 
> 
> Martin Blumenstingl (1):
>   arm64: dts: meson: g12a: add the GPIO interrupt controller
> 
> Xingyu Chen (2):
>   dt-bindings: interrupt-controller: New binding for Meson-G12A SoC
>   irqchip/meson-gpio: Add support for Meson-G12A SoC
> 
>  .../interrupt-controller/amlogic,meson-gpio-intc.txt     | 1 +
>  arch/arm64/boot/dts/amlogic/meson-g12a.dtsi              | 9 +++++++++
>  drivers/irqchip/irq-meson-gpio.c                         | 1 +
>  3 files changed, 11 insertions(+)
> 

I've taken patches 1 and 2 into the irqchip tree. Please route patch 3
though armsoc.

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH v3 3/3] arm64: dts: meson: g12a: add the GPIO interrupt controller

[Neil Armstrong]

On 08/06/2019 21:04, Martin Blumenstingl wrote:
> GPIO interrupts are used for the external Ethernet RGMII PHY interrupt
> line.
> Add the GPIO interrupt controller so we can describe that connection in
> the dts files.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>  arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
> index 6aec4cf87350..50fcdb3e55bb 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
> @@ -2222,6 +2222,15 @@
>  				#reset-cells = <1>;
>  			};
>  
> +			gpio_intc: interrupt-controller@f080 {
> +				compatible = "amlogic,meson-g12a-gpio-intc",
> +					     "amlogic,meson-gpio-intc";
> +				reg = <0x0 0xf080 0x0 0x10>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
> +			};
> +
>  			pwm_ef: pwm@19000 {
>  				compatible = "amlogic,meson-g12a-ee-pwm";
>  				reg = <0x0 0x19000 0x0 0x20>;
> 

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH v3 3/3] arm64: dts: meson: g12a: add the GPIO interrupt controller

[Kevin Hilman]

Neil Armstrong <narmstrong@baylibre.com> writes:

> On 08/06/2019 21:04, Martin Blumenstingl wrote:
>> GPIO interrupts are used for the external Ethernet RGMII PHY interrupt
>> line.
>> Add the GPIO interrupt controller so we can describe that connection in
>> the dts files.
>> 
>> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
>> ---
>>  arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 9 +++++++++
>>  1 file changed, 9 insertions(+)
>> 
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
>> index 6aec4cf87350..50fcdb3e55bb 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
>> @@ -2222,6 +2222,15 @@
>>  				#reset-cells = <1>;
>>  			};
>>  
>> +			gpio_intc: interrupt-controller@f080 {
>> +				compatible = "amlogic,meson-g12a-gpio-intc",
>> +					     "amlogic,meson-gpio-intc";
>> +				reg = <0x0 0xf080 0x0 0x10>;
>> +				interrupt-controller;
>> +				#interrupt-cells = <2>;
>> +				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
>> +			};
>> +
>>  			pwm_ef: pwm@19000 {
>>  				compatible = "amlogic,meson-g12a-ee-pwm";
>>  				reg = <0x0 0x19000 0x0 0x20>;
>> 
>
> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>

Queuing for v5.3,

Kevin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic