[Qemu-devel] [PATCH 0/2] migration/xbzrle: make xbzrle_encode_buffer little easier

[Qemu-devel] [PATCH 0/2] migration/xbzrle: make xbzrle_encode_buffer little easier

[Wei Yang]

Current xbzrle_encode_buffer() do everything in a big loop, which is a little
difficult for audience to catch the logic.

We can refine the logic with:

  * get the length of a run
  * encode it

At the same time, I found the encoding and decoding function has some extra
pointer operation. Removing this could save some code space.

Wei Yang (2):
  cutils: remove one unnecessary pointer operation
  migration/xbzrle: make xbzrle_encode_buffer little easier to read

 migration/xbzrle.c | 153 +++++++++++++++++++++------------------------
 util/cutils.c      |   8 +--
 2 files changed, 77 insertions(+), 84 deletions(-)

-- 
2.19.1

[Qemu-devel] [PATCH 1/2] cutils: remove one unnecessary pointer operation

[Wei Yang]

Since we will not operate on the next address pointed by out, it is not
necessary to do addition on it.

After removing the operation, the function size reduced 16/18 bytes.

Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
---
 util/cutils.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/util/cutils.c b/util/cutils.c
index 9aacc422ca..1933a68da5 100644
--- a/util/cutils.c
+++ b/util/cutils.c
@@ -754,11 +754,11 @@ int uleb128_encode_small(uint8_t *out, uint32_t n)
 {
     g_assert(n <= 0x3fff);
     if (n < 0x80) {
-        *out++ = n;
+        *out = n;
         return 1;
     } else {
         *out++ = (n & 0x7f) | 0x80;
-        *out++ = n >> 7;
+        *out = n >> 7;
         return 2;
     }
 }
@@ -766,7 +766,7 @@ int uleb128_encode_small(uint8_t *out, uint32_t n)
 int uleb128_decode_small(const uint8_t *in, uint32_t *n)
 {
     if (!(*in & 0x80)) {
-        *n = *in++;
+        *n = *in;
         return 1;
     } else {
         *n = *in++ & 0x7f;
@@ -774,7 +774,7 @@ int uleb128_decode_small(const uint8_t *in, uint32_t *n)
         if (*in & 0x80) {
             return -1;
         }
-        *n |= *in++ << 7;
+        *n |= *in << 7;
         return 2;
     }
 }
-- 
2.19.1

[Qemu-devel] [PATCH 2/2] migration/xbzrle: make xbzrle_encode_buffer little easier to read

[Wei Yang]

The encoding process could be described below:

    for [content]
        get length of a run
        encode this run

By refactoring the code with this logic, it maybe a little easier to
understand.

Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
---
 migration/xbzrle.c | 153 +++++++++++++++++++++------------------------
 1 file changed, 73 insertions(+), 80 deletions(-)

diff --git a/migration/xbzrle.c b/migration/xbzrle.c
index 1ba482ded9..25c69708ec 100644
--- a/migration/xbzrle.c
+++ b/migration/xbzrle.c
@@ -14,6 +14,59 @@
 #include "qemu/cutils.h"
 #include "xbzrle.h"
 
+static int next_run(uint8_t *old_buf, uint8_t *new_buf, int off, int slen,
+                    bool zrun)
+{
+    uint32_t len = 0;
+    long res;
+
+    res = (slen - off) % sizeof(long);
+
+    /* first unaligned bytes */
+    while (res) {
+        uint8_t xor = old_buf[off + len] ^ new_buf[off + len];
+
+        if (!(zrun ^ !!xor)) {
+            break;
+        }
+        len++;
+        res--;
+    }
+
+    if (res) {
+        return len;
+    }
+
+    /* word at a time for speed, use of 32-bit long okay */
+    while (off + len < slen) {
+        /* truncation to 32-bit long okay */
+        unsigned long mask = (unsigned long)0x0101010101010101ULL;
+        long xor = (*(long *)(old_buf + off + len)) ^
+                   (*(long *)(new_buf + off + len));
+
+        if (zrun && !(zrun ^ !!xor)) {
+            break;
+        } else if (!zrun && ((xor - mask) & ~xor & (mask << 7))) {
+            break;
+        }
+
+        len += sizeof(long);
+    }
+
+    /* go over the rest */
+    while (off + len < slen) {
+        uint8_t xor = old_buf[off + len] ^ new_buf[off + len];
+
+        if (!(zrun ^ !!xor)) {
+            break;
+        }
+
+        len++;
+    }
+
+    return len;
+}
+
 /*
   page = zrun nzrun
        | zrun nzrun page
@@ -27,103 +80,43 @@
 int xbzrle_encode_buffer(uint8_t *old_buf, uint8_t *new_buf, int slen,
                          uint8_t *dst, int dlen)
 {
-    uint32_t zrun_len = 0, nzrun_len = 0;
-    int d = 0, i = 0;
-    long res;
-    uint8_t *nzrun_start = NULL;
+    bool zrun = true;
+    int len, src_off = 0, dst_off = 0;
 
     g_assert(!(((uintptr_t)old_buf | (uintptr_t)new_buf | slen) %
                sizeof(long)));
 
-    while (i < slen) {
+    for (; src_off < slen; src_off += len, zrun = !zrun) {
         /* overflow */
-        if (d + 2 > dlen) {
+        if (dst_off + 2 > dlen) {
             return -1;
         }
 
-        /* not aligned to sizeof(long) */
-        res = (slen - i) % sizeof(long);
-        while (res && old_buf[i] == new_buf[i]) {
-            zrun_len++;
-            i++;
-            res--;
-        }
+        len = next_run(old_buf, new_buf, src_off, slen, zrun);
 
-        /* word at a time for speed */
-        if (!res) {
-            while (i < slen &&
-                   (*(long *)(old_buf + i)) == (*(long *)(new_buf + i))) {
-                i += sizeof(long);
-                zrun_len += sizeof(long);
+        if (zrun) {
+            /* buffer unchanged */
+            if (len == slen) {
+                return 0;
             }
-
-            /* go over the rest */
-            while (i < slen && old_buf[i] == new_buf[i]) {
-                zrun_len++;
-                i++;
+            /* skip last zero run */
+            if (src_off + len == slen) {
+                return dst_off;
             }
         }
 
-        /* buffer unchanged */
-        if (zrun_len == slen) {
-            return 0;
-        }
-
-        /* skip last zero run */
-        if (i == slen) {
-            return d;
-        }
-
-        d += uleb128_encode_small(dst + d, zrun_len);
-
-        zrun_len = 0;
-        nzrun_start = new_buf + i;
-
-        /* overflow */
-        if (d + 2 > dlen) {
-            return -1;
-        }
-        /* not aligned to sizeof(long) */
-        res = (slen - i) % sizeof(long);
-        while (res && old_buf[i] != new_buf[i]) {
-            i++;
-            nzrun_len++;
-            res--;
-        }
-
-        /* word at a time for speed, use of 32-bit long okay */
-        if (!res) {
-            /* truncation to 32-bit long okay */
-            unsigned long mask = (unsigned long)0x0101010101010101ULL;
-            while (i < slen) {
-                unsigned long xor;
-                xor = *(unsigned long *)(old_buf + i)
-                    ^ *(unsigned long *)(new_buf + i);
-                if ((xor - mask) & ~xor & (mask << 7)) {
-                    /* found the end of an nzrun within the current long */
-                    while (old_buf[i] != new_buf[i]) {
-                        nzrun_len++;
-                        i++;
-                    }
-                    break;
-                } else {
-                    i += sizeof(long);
-                    nzrun_len += sizeof(long);
-                }
+        dst_off += uleb128_encode_small(dst + dst_off, len);
+        if (!zrun) {
+            /* overflow */
+            if (dst_off + len > dlen) {
+                return -1;
             }
+            memcpy(dst + dst_off, new_buf + src_off, len);
+            dst_off += len;
         }
-
-        d += uleb128_encode_small(dst + d, nzrun_len);
-        /* overflow */
-        if (d + nzrun_len > dlen) {
-            return -1;
-        }
-        memcpy(dst + d, nzrun_start, nzrun_len);
-        d += nzrun_len;
-        nzrun_len = 0;
     }
 
-    return d;
+    return dst_off;
 }
 
 int xbzrle_decode_buffer(uint8_t *src, int slen, uint8_t *dst, int dlen)
-- 
2.19.1

Re: [Qemu-devel] [PATCH 1/2] cutils: remove one unnecessary pointer operation

[Dr. David Alan Gilbert]

* Wei Yang (richardw.yang@linux.intel.com) wrote:
> Since we will not operate on the next address pointed by out, it is not
> necessary to do addition on it.
> 
> After removing the operation, the function size reduced 16/18 bytes.

For me with a -O3 it didn't make any difference - the compiler was
already smart enough to spot it, but it is correct.


Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

> Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
> ---
>  util/cutils.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/util/cutils.c b/util/cutils.c
> index 9aacc422ca..1933a68da5 100644
> --- a/util/cutils.c
> +++ b/util/cutils.c
> @@ -754,11 +754,11 @@ int uleb128_encode_small(uint8_t *out, uint32_t n)
>  {
>      g_assert(n <= 0x3fff);
>      if (n < 0x80) {
> -        *out++ = n;
> +        *out = n;
>          return 1;
>      } else {
>          *out++ = (n & 0x7f) | 0x80;
> -        *out++ = n >> 7;
> +        *out = n >> 7;
>          return 2;
>      }
>  }
> @@ -766,7 +766,7 @@ int uleb128_encode_small(uint8_t *out, uint32_t n)
>  int uleb128_decode_small(const uint8_t *in, uint32_t *n)
>  {
>      if (!(*in & 0x80)) {
> -        *n = *in++;
> +        *n = *in;
>          return 1;
>      } else {
>          *n = *in++ & 0x7f;
> @@ -774,7 +774,7 @@ int uleb128_decode_small(const uint8_t *in, uint32_t *n)
>          if (*in & 0x80) {
>              return -1;
>          }
> -        *n |= *in++ << 7;
> +        *n |= *in << 7;
>          return 2;
>      }
>  }
> -- 
> 2.19.1
> 
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK

Re: [Qemu-devel] [PATCH 2/2] migration/xbzrle: make xbzrle_encode_buffer little easier to read

[Dr. David Alan Gilbert]

* Wei Yang (richardw.yang@linux.intel.com) wrote:
> The encoding process could be described below:
> 
>     for [content]
>         get length of a run
>         encode this run
> 
> By refactoring the code with this logic, it maybe a little easier to
> understand.
> 
> Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
> ---
>  migration/xbzrle.c | 153 +++++++++++++++++++++------------------------
>  1 file changed, 73 insertions(+), 80 deletions(-)
> 
> diff --git a/migration/xbzrle.c b/migration/xbzrle.c
> index 1ba482ded9..25c69708ec 100644
> --- a/migration/xbzrle.c
> +++ b/migration/xbzrle.c
> @@ -14,6 +14,59 @@
>  #include "qemu/cutils.h"
>  #include "xbzrle.h"
>  
> +static int next_run(uint8_t *old_buf, uint8_t *new_buf, int off, int slen,
> +                    bool zrun)
> +{
> +    uint32_t len = 0;
> +    long res;
> +
> +    res = (slen - off) % sizeof(long);
> +
> +    /* first unaligned bytes */
> +    while (res) {
> +        uint8_t xor = old_buf[off + len] ^ new_buf[off + len];
> +
> +        if (!(zrun ^ !!xor)) {
> +            break;
> +        }
> +        len++;
> +        res--;
> +    }
> +
> +    if (res) {
> +        return len;
> +    }
> +
> +    /* word at a time for speed, use of 32-bit long okay */
> +    while (off + len < slen) {
> +        /* truncation to 32-bit long okay */
> +        unsigned long mask = (unsigned long)0x0101010101010101ULL;
> +        long xor = (*(long *)(old_buf + off + len)) ^
> +                   (*(long *)(new_buf + off + len));
> +
> +        if (zrun && !(zrun ^ !!xor)) {

Are lines like this really making it easier to read?

Juan: Opinion?

Dave

> +            break;
> +        } else if (!zrun && ((xor - mask) & ~xor & (mask << 7))) {


> +            break;
> +        }
> +
> +        len += sizeof(long);
> +    }
> +
> +    /* go over the rest */
> +    while (off + len < slen) {
> +        uint8_t xor = old_buf[off + len] ^ new_buf[off + len];
> +
> +        if (!(zrun ^ !!xor)) {
> +            break;
> +        }
> +
> +        len++;
> +    }
> +
> +    return len;
> +}
> +
>  /*
>    page = zrun nzrun
>         | zrun nzrun page
> @@ -27,103 +80,43 @@
>  int xbzrle_encode_buffer(uint8_t *old_buf, uint8_t *new_buf, int slen,
>                           uint8_t *dst, int dlen)
>  {
> -    uint32_t zrun_len = 0, nzrun_len = 0;
> -    int d = 0, i = 0;
> -    long res;
> -    uint8_t *nzrun_start = NULL;
> +    bool zrun = true;
> +    int len, src_off = 0, dst_off = 0;
>  
>      g_assert(!(((uintptr_t)old_buf | (uintptr_t)new_buf | slen) %
>                 sizeof(long)));
>  
> -    while (i < slen) {
> +    for (; src_off < slen; src_off += len, zrun = !zrun) {
>          /* overflow */
> -        if (d + 2 > dlen) {
> +        if (dst_off + 2 > dlen) {
>              return -1;
>          }
>  
> -        /* not aligned to sizeof(long) */
> -        res = (slen - i) % sizeof(long);
> -        while (res && old_buf[i] == new_buf[i]) {
> -            zrun_len++;
> -            i++;
> -            res--;
> -        }
> +        len = next_run(old_buf, new_buf, src_off, slen, zrun);
>  
> -        /* word at a time for speed */
> -        if (!res) {
> -            while (i < slen &&
> -                   (*(long *)(old_buf + i)) == (*(long *)(new_buf + i))) {
> -                i += sizeof(long);
> -                zrun_len += sizeof(long);
> +        if (zrun) {
> +            /* buffer unchanged */
> +            if (len == slen) {
> +                return 0;
>              }
> -
> -            /* go over the rest */
> -            while (i < slen && old_buf[i] == new_buf[i]) {
> -                zrun_len++;
> -                i++;
> +            /* skip last zero run */
> +            if (src_off + len == slen) {
> +                return dst_off;
>              }
>          }
>  
> -        /* buffer unchanged */
> -        if (zrun_len == slen) {
> -            return 0;
> -        }
> -
> -        /* skip last zero run */
> -        if (i == slen) {
> -            return d;
> -        }
> -
> -        d += uleb128_encode_small(dst + d, zrun_len);
> -
> -        zrun_len = 0;
> -        nzrun_start = new_buf + i;
> -
> -        /* overflow */
> -        if (d + 2 > dlen) {
> -            return -1;
> -        }
> -        /* not aligned to sizeof(long) */
> -        res = (slen - i) % sizeof(long);
> -        while (res && old_buf[i] != new_buf[i]) {
> -            i++;
> -            nzrun_len++;
> -            res--;
> -        }
> -
> -        /* word at a time for speed, use of 32-bit long okay */
> -        if (!res) {
> -            /* truncation to 32-bit long okay */
> -            unsigned long mask = (unsigned long)0x0101010101010101ULL;
> -            while (i < slen) {
> -                unsigned long xor;
> -                xor = *(unsigned long *)(old_buf + i)
> -                    ^ *(unsigned long *)(new_buf + i);
> -                if ((xor - mask) & ~xor & (mask << 7)) {
> -                    /* found the end of an nzrun within the current long */
> -                    while (old_buf[i] != new_buf[i]) {
> -                        nzrun_len++;
> -                        i++;
> -                    }
> -                    break;
> -                } else {
> -                    i += sizeof(long);
> -                    nzrun_len += sizeof(long);
> -                }
> +        dst_off += uleb128_encode_small(dst + dst_off, len);
> +        if (!zrun) {
> +            /* overflow */
> +            if (dst_off + len > dlen) {
> +                return -1;
>              }
> +            memcpy(dst + dst_off, new_buf + src_off, len);
> +            dst_off += len;
>          }
> -
> -        d += uleb128_encode_small(dst + d, nzrun_len);
> -        /* overflow */
> -        if (d + nzrun_len > dlen) {
> -            return -1;
> -        }
> -        memcpy(dst + d, nzrun_start, nzrun_len);
> -        d += nzrun_len;
> -        nzrun_len = 0;
>      }
>  
> -    return d;
> +    return dst_off;
>  }
>  
>  int xbzrle_decode_buffer(uint8_t *src, int slen, uint8_t *dst, int dlen)
> -- 
> 2.19.1
> 
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK

Re: [Qemu-devel] [PATCH 1/2] cutils: remove one unnecessary pointer operation

[Wei Yang]

On Tue, Jun 11, 2019 at 06:49:54PM +0100, Dr. David Alan Gilbert wrote:
>* Wei Yang (richardw.yang@linux.intel.com) wrote:
>> Since we will not operate on the next address pointed by out, it is not
>> necessary to do addition on it.
>> 
>> After removing the operation, the function size reduced 16/18 bytes.
>
>For me with a -O3 it didn't make any difference - the compiler was
>already smart enough to spot it, but it is correct.
>

Ah, you are right.

>
>Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
>
>> Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
>> ---
>>  util/cutils.c | 8 ++++----
>>  1 file changed, 4 insertions(+), 4 deletions(-)
>> 
>> diff --git a/util/cutils.c b/util/cutils.c
>> index 9aacc422ca..1933a68da5 100644
>> --- a/util/cutils.c
>> +++ b/util/cutils.c
>> @@ -754,11 +754,11 @@ int uleb128_encode_small(uint8_t *out, uint32_t n)
>>  {
>>      g_assert(n <= 0x3fff);
>>      if (n < 0x80) {
>> -        *out++ = n;
>> +        *out = n;
>>          return 1;
>>      } else {
>>          *out++ = (n & 0x7f) | 0x80;
>> -        *out++ = n >> 7;
>> +        *out = n >> 7;
>>          return 2;
>>      }
>>  }
>> @@ -766,7 +766,7 @@ int uleb128_encode_small(uint8_t *out, uint32_t n)
>>  int uleb128_decode_small(const uint8_t *in, uint32_t *n)
>>  {
>>      if (!(*in & 0x80)) {
>> -        *n = *in++;
>> +        *n = *in;
>>          return 1;
>>      } else {
>>          *n = *in++ & 0x7f;
>> @@ -774,7 +774,7 @@ int uleb128_decode_small(const uint8_t *in, uint32_t *n)
>>          if (*in & 0x80) {
>>              return -1;
>>          }
>> -        *n |= *in++ << 7;
>> +        *n |= *in << 7;
>>          return 2;
>>      }
>>  }
>> -- 
>> 2.19.1
>> 
>--
>Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK

-- 
Wei Yang
Help you, Help me

Re: [Qemu-devel] [PATCH 2/2] migration/xbzrle: make xbzrle_encode_buffer little easier to read

[Wei Yang]

On Tue, Jun 11, 2019 at 06:59:26PM +0100, Dr. David Alan Gilbert wrote:
>* Wei Yang (richardw.yang@linux.intel.com) wrote:
>> The encoding process could be described below:
>> 
>>     for [content]
>>         get length of a run
>>         encode this run
>> 
>> By refactoring the code with this logic, it maybe a little easier to
>> understand.
>> 
>> Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
>> ---
>>  migration/xbzrle.c | 153 +++++++++++++++++++++------------------------
>>  1 file changed, 73 insertions(+), 80 deletions(-)
>> 
>> diff --git a/migration/xbzrle.c b/migration/xbzrle.c
>> index 1ba482ded9..25c69708ec 100644
>> --- a/migration/xbzrle.c
>> +++ b/migration/xbzrle.c
>> @@ -14,6 +14,59 @@
>>  #include "qemu/cutils.h"
>>  #include "xbzrle.h"
>>  
>> +static int next_run(uint8_t *old_buf, uint8_t *new_buf, int off, int slen,
>> +                    bool zrun)
>> +{
>> +    uint32_t len = 0;
>> +    long res;
>> +
>> +    res = (slen - off) % sizeof(long);
>> +
>> +    /* first unaligned bytes */
>> +    while (res) {
>> +        uint8_t xor = old_buf[off + len] ^ new_buf[off + len];
>> +
>> +        if (!(zrun ^ !!xor)) {
>> +            break;
>> +        }
>> +        len++;
>> +        res--;
>> +    }
>> +
>> +    if (res) {
>> +        return len;
>> +    }
>> +
>> +    /* word at a time for speed, use of 32-bit long okay */
>> +    while (off + len < slen) {
>> +        /* truncation to 32-bit long okay */
>> +        unsigned long mask = (unsigned long)0x0101010101010101ULL;
>> +        long xor = (*(long *)(old_buf + off + len)) ^
>> +                   (*(long *)(new_buf + off + len));
>> +
>> +        if (zrun && !(zrun ^ !!xor)) {
>
>Are lines like this really making it easier to read?
>

Yep, this may took some time to understand. Let me put a chart to explain.

We have two choices for both zrun and xor, so we have 4 combinations:

    xor |  0 (no change) |  !0 (changed) 
 zrun   |                |
 -------+----------------+--------------
  1     |  *             |  x
 -------+----------------+--------------
  0     |  x             |  *

We can see the situation with '*' is the one we are looking for. And those
situations could be expressed with (zrun ^ xor). Since we need to convert xor
to something like boolean, so xor is converted to !!xor.

But yes, you are right. This part is not as easy as original one. In case you
don't like this, we can change it back to the original version.
                          
>Juan: Opinion?
>
>Dave
>
-- 
Wei Yang
Help you, Help me

Re: [Qemu-devel] [PATCH 2/2] migration/xbzrle: make xbzrle_encode_buffer little easier to read

[Wei Yang]

On Tue, Jun 11, 2019 at 06:59:26PM +0100, Dr. David Alan Gilbert wrote:
>* Wei Yang (richardw.yang@linux.intel.com) wrote:
>> The encoding process could be described below:
>> 
>>     for [content]
>>         get length of a run
>>         encode this run
>> 
>> By refactoring the code with this logic, it maybe a little easier to
>> understand.
>> 
>> Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
>> ---
>>  migration/xbzrle.c | 153 +++++++++++++++++++++------------------------
>>  1 file changed, 73 insertions(+), 80 deletions(-)
>> 
>> diff --git a/migration/xbzrle.c b/migration/xbzrle.c
>> index 1ba482ded9..25c69708ec 100644
>> --- a/migration/xbzrle.c
>> +++ b/migration/xbzrle.c
>> @@ -14,6 +14,59 @@
>>  #include "qemu/cutils.h"
>>  #include "xbzrle.h"
>>  
>> +static int next_run(uint8_t *old_buf, uint8_t *new_buf, int off, int slen,
>> +                    bool zrun)
>> +{
>> +    uint32_t len = 0;
>> +    long res;
>> +
>> +    res = (slen - off) % sizeof(long);
>> +
>> +    /* first unaligned bytes */
>> +    while (res) {
>> +        uint8_t xor = old_buf[off + len] ^ new_buf[off + len];
>> +
>> +        if (!(zrun ^ !!xor)) {
>> +            break;
>> +        }
>> +        len++;
>> +        res--;
>> +    }
>> +
>> +    if (res) {
>> +        return len;
>> +    }
>> +
>> +    /* word at a time for speed, use of 32-bit long okay */
>> +    while (off + len < slen) {
>> +        /* truncation to 32-bit long okay */
>> +        unsigned long mask = (unsigned long)0x0101010101010101ULL;
>> +        long xor = (*(long *)(old_buf + off + len)) ^
>> +                   (*(long *)(new_buf + off + len));
>> +
>> +        if (zrun && !(zrun ^ !!xor)) {
>
>Are lines like this really making it easier to read?
>

BTW, this line could be simplified to 

        if (!(zrun ^ !!xor)) {

>Juan: Opinion?
>
>Dave
>

-- 
Wei Yang
Help you, Help me

Re: [Qemu-devel] [PATCH 1/2] cutils: remove one unnecessary pointer operation

[Juan Quintela]

Wei Yang <richardw.yang@linux.intel.com> wrote:
> Since we will not operate on the next address pointed by out, it is not
> necessary to do addition on it.
>
> After removing the operation, the function size reduced 16/18 bytes.
>
> Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>

Reviewed-by: Juan Quintela <quintela@redhat.com>

Included.  I agree with David that the compiler should detect that, but
also agreed that it shouldn't be there in the first place.

Re: [Qemu-devel] [PATCH 2/2] migration/xbzrle: make xbzrle_encode_buffer little easier to read

[Juan Quintela]

"Dr. David Alan Gilbert" <dgilbert@redhat.com> wrote:
> * Wei Yang (richardw.yang@linux.intel.com) wrote:
>> The encoding process could be described below:
>> 
>>     for [content]
>>         get length of a run
>>         encode this run
>> 
>> By refactoring the code with this logic, it maybe a little easier to
>> understand.
>> 
>
> Are lines like this really making it easier to read?
>
> Juan: Opinion?

Code is easier to understand .....

For values that I understand the code.  I need to take a big breath and
will take a deep look at it and see if it really does the same.

Later, Juan.

Re: [Qemu-devel] [PATCH 2/2] migration/xbzrle: make xbzrle_encode_buffer little easier to read

[Wei Yang]

On Wed, Jun 12, 2019 at 12:29:27PM +0200, Juan Quintela wrote:
>"Dr. David Alan Gilbert" <dgilbert@redhat.com> wrote:
>> * Wei Yang (richardw.yang@linux.intel.com) wrote:
>>> The encoding process could be described below:
>>> 
>>>     for [content]
>>>         get length of a run
>>>         encode this run
>>> 
>>> By refactoring the code with this logic, it maybe a little easier to
>>> understand.
>>> 
>>
>> Are lines like this really making it easier to read?
>>
>> Juan: Opinion?
>
>Code is easier to understand .....
>
>For values that I understand the code.  I need to take a big breath and
>will take a deep look at it and see if it really does the same.
>

Haha, thanks for your feedback.

>Later, Juan.

-- 
Wei Yang
Help you, Help me