All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yuantian Tang <andy.tang@nxp.com>
To: shawnguo@kernel.org
Cc: leoyang.li@nxp.com, robh+dt@kernel.org, mark.rutland@arm.com,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, Yuantian Tang <andy.tang@nxp.com>
Subject: [PATCH v3] arm64: dts: ls1028a: Add temperature sensor node
Date: Tue, 11 Jun 2019 13:42:44 +0800	[thread overview]
Message-ID: <20190611054244.35269-1-andy.tang@nxp.com> (raw)

Add nxp sa56004 chip node for temperature monitor.

Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
---
v3:
	- sort the node in i2c address
v2:
	- change the node name and add vcc-supply
 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts |   15 +++++++++++++++
 arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts |   15 +++++++++++++++
 2 files changed, 30 insertions(+), 0 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index b359068..960daf2 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -47,6 +47,15 @@
 		regulator-always-on;
 	};
 
+	sb_3v3: regulator-sb3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,format = "i2s";
@@ -117,6 +126,12 @@
 			#size-cells = <0>;
 			reg = <0x3>;
 
+			temperature-sensor@4c {
+				compatible = "nxp,sa56004";
+				reg = <0x4c>;
+				vcc-supply = <&sb_3v3>;
+			};
+
 			rtc@51 {
 				compatible = "nxp,pcf2129";
 				reg = <0x51>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index f9c272f..6a22423 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -43,6 +43,15 @@
 		regulator-always-on;
 	};
 
+	sb_3v3: regulator-sb3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,format = "i2s";
@@ -115,6 +124,12 @@
 			#size-cells = <0>;
 			reg = <0x3>;
 
+			temperature-sensor@4c {
+				compatible = "nxp,sa56004";
+				reg = <0x4c>;
+				vcc-supply = <&sb_3v3>;
+			};
+
 			rtc@51 {
 				compatible = "nxp,pcf2129";
 				reg = <0x51>;
-- 
1.7.1


WARNING: multiple messages have this Message-ID (diff)
From: Yuantian Tang <andy.tang@nxp.com>
To: shawnguo@kernel.org
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
	Yuantian Tang <andy.tang@nxp.com>,
	linux-kernel@vger.kernel.org, leoyang.li@nxp.com,
	robh+dt@kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3] arm64: dts: ls1028a: Add temperature sensor node
Date: Tue, 11 Jun 2019 13:42:44 +0800	[thread overview]
Message-ID: <20190611054244.35269-1-andy.tang@nxp.com> (raw)

Add nxp sa56004 chip node for temperature monitor.

Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
---
v3:
	- sort the node in i2c address
v2:
	- change the node name and add vcc-supply
 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts |   15 +++++++++++++++
 arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts |   15 +++++++++++++++
 2 files changed, 30 insertions(+), 0 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index b359068..960daf2 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -47,6 +47,15 @@
 		regulator-always-on;
 	};
 
+	sb_3v3: regulator-sb3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,format = "i2s";
@@ -117,6 +126,12 @@
 			#size-cells = <0>;
 			reg = <0x3>;
 
+			temperature-sensor@4c {
+				compatible = "nxp,sa56004";
+				reg = <0x4c>;
+				vcc-supply = <&sb_3v3>;
+			};
+
 			rtc@51 {
 				compatible = "nxp,pcf2129";
 				reg = <0x51>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index f9c272f..6a22423 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -43,6 +43,15 @@
 		regulator-always-on;
 	};
 
+	sb_3v3: regulator-sb3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,format = "i2s";
@@ -115,6 +124,12 @@
 			#size-cells = <0>;
 			reg = <0x3>;
 
+			temperature-sensor@4c {
+				compatible = "nxp,sa56004";
+				reg = <0x4c>;
+				vcc-supply = <&sb_3v3>;
+			};
+
 			rtc@51 {
 				compatible = "nxp,pcf2129";
 				reg = <0x51>;
-- 
1.7.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2019-06-11  5:51 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-11  5:42 Yuantian Tang [this message]
2019-06-11  5:42 ` [PATCH v3] arm64: dts: ls1028a: Add temperature sensor node Yuantian Tang
2019-06-13  2:51 ` Shawn Guo
2019-06-13  2:51   ` Shawn Guo
2019-06-13  2:51   ` Shawn Guo
2019-08-06  5:30 Yuantian Tang
2019-08-06  5:30 ` Yuantian Tang
2019-08-06  5:41 ` Andy Tang
2019-08-06  5:41   ` Andy Tang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190611054244.35269-1-andy.tang@nxp.com \
    --to=andy.tang@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.