All of lore.kernel.org
 help / color / mirror / Atom feed
From: Anson.Huang@nxp.com
To: robh+dt@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org,
	s.hauer@pengutronix.de, kernel@pengutronix.de,
	festevam@gmail.com, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: Linux-imx@nxp.com
Subject: [PATCH 5/6] ARM: dts: imx7s: Enable SNVS power key according to board design
Date: Thu, 13 Jun 2019 11:35:26 +0800	[thread overview]
Message-ID: <20190613033527.40555-5-Anson.Huang@nxp.com> (raw)
In-Reply-To: <20190613033527.40555-1-Anson.Huang@nxp.com>

From: Anson Huang <Anson.Huang@nxp.com>

The SNVS power key depends on board design, by default it should
be disabled in SoC DT and ONLY be enabled on board DT if it is
wired up.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
 arch/arm/boot/dts/imx7d-sdb.dts | 4 ++++
 arch/arm/boot/dts/imx7s.dtsi    | 1 +
 2 files changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index a5365b8..869efbc 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -387,6 +387,10 @@
 	vin-supply = <&sw2_reg>;
 };
 
+&snvs_pwrkey {
+	status = "okay";
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index d8b4eb6..479be1f 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -609,6 +609,7 @@
 					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 					linux,keycode = <KEY_POWER>;
 					wakeup-source;
+					status = "disabled";
 				};
 			};
 
-- 
2.7.4


WARNING: multiple messages have this Message-ID (diff)
From: Anson.Huang@nxp.com
To: robh+dt@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org,
	s.hauer@pengutronix.de, kernel@pengutronix.de,
	festevam@gmail.com, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: Linux-imx@nxp.com
Subject: [PATCH 5/6] ARM: dts: imx7s: Enable SNVS power key according to board design
Date: Thu, 13 Jun 2019 11:35:26 +0800	[thread overview]
Message-ID: <20190613033527.40555-5-Anson.Huang@nxp.com> (raw)
In-Reply-To: <20190613033527.40555-1-Anson.Huang@nxp.com>

From: Anson Huang <Anson.Huang@nxp.com>

The SNVS power key depends on board design, by default it should
be disabled in SoC DT and ONLY be enabled on board DT if it is
wired up.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
 arch/arm/boot/dts/imx7d-sdb.dts | 4 ++++
 arch/arm/boot/dts/imx7s.dtsi    | 1 +
 2 files changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index a5365b8..869efbc 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -387,6 +387,10 @@
 	vin-supply = <&sw2_reg>;
 };
 
+&snvs_pwrkey {
+	status = "okay";
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index d8b4eb6..479be1f 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -609,6 +609,7 @@
 					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 					linux,keycode = <KEY_POWER>;
 					wakeup-source;
+					status = "disabled";
 				};
 			};
 
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-06-13 16:51 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-13  3:35 [PATCH 1/6] ARM: dts: imx6qdl: Enable SNVS power key according to board design Anson.Huang
2019-06-13  3:35 ` Anson.Huang
2019-06-13  3:35 ` [PATCH 2/6] ARM: dts: imx6sx: " Anson.Huang
2019-06-13  3:35   ` Anson.Huang
2019-06-13  3:35 ` [PATCH 3/6] ARM: dts: imx6ul: " Anson.Huang
2019-06-13  3:35   ` Anson.Huang
2019-06-13  3:35 ` [PATCH 4/6] ARM: dts: imx6sll: " Anson.Huang
2019-06-13  3:35   ` Anson.Huang
2019-06-13  3:35 ` Anson.Huang [this message]
2019-06-13  3:35   ` [PATCH 5/6] ARM: dts: imx7s: " Anson.Huang
2019-06-13  3:35 ` [PATCH 6/6] ARM: dts: imx6sll: Enable SNVS poweroff " Anson.Huang
2019-06-13  3:35   ` Anson.Huang
2019-06-18  7:15 ` [PATCH 1/6] ARM: dts: imx6qdl: Enable SNVS power key " Shawn Guo
2019-06-18  7:15   ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190613033527.40555-5-Anson.Huang@nxp.com \
    --to=anson.huang@nxp.com \
    --cc=Linux-imx@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.