* [Qemu-devel] [QEMU] [PATCH v3 0/8] Add Qemu to SeaBIOS LCHS interface
@ 2019-06-17 15:09 Sam Eiderman
2019-06-17 15:09 ` [Qemu-devel] [QEMU] [PATCH v3 1/8] block: Refactor macros - fix tabbing Sam Eiderman
` (9 more replies)
0 siblings, 10 replies; 11+ messages in thread
From: Sam Eiderman @ 2019-06-17 15:09 UTC (permalink / raw)
To: kwolf, qemu-block, qemu-devel, mreitz, seabios, kraxel, kevin
Cc: liran.alon, shmuel.eiderman, karl.heubaum, arbel.moshe
v1:
Non-standard logical geometries break under QEMU.
A virtual disk which contains an operating system which depends on
logical geometries (consistent values being reported from BIOS INT13
AH=08) will most likely break under QEMU/SeaBIOS if it has non-standard
logical geometries - for example 56 SPT (sectors per track).
No matter what QEMU will guess - SeaBIOS, for large enough disks - will
use LBA translation, which will report 63 SPT instead.
In addition we can not enforce SeaBIOS to rely on phyiscal geometries at
all. A virtio-blk-pci virtual disk with 255 phyiscal heads can not
report more than 16 physical heads when moved to an IDE controller, the
ATA spec allows a maximum of 16 heads - this is an artifact of
virtualization.
By supplying the logical geometies directly we are able to support such
"exotic" disks.
We will use fw_cfg to do just that.
v2:
Fix missing parenthesis check in
"hd-geo-test: Add tests for lchs override"
v3:
* Rename fw_cfg key to "bios-geometry".
* Remove "extendible" interface.
* Add cpu_to_le32 fix as Laszlo suggested or big endian hosts
* Fix last qtest commit - automatic docker tester for some reason does not have qemu-img set
Sam Eiderman (8):
block: Refactor macros - fix tabbing
block: Support providing LCHS from user
bootdevice: Add interface to gather LCHS
scsi: Propagate unrealize() callback to scsi-hd
bootdevice: Gather LCHS from all relevant devices
bootdevice: Refactor get_boot_devices_list
bootdevice: FW_CFG interface for LCHS values
hd-geo-test: Add tests for lchs override
bootdevice.c | 154 ++++++++++---
hw/block/virtio-blk.c | 6 +
hw/ide/qdev.c | 7 +-
hw/nvram/fw_cfg.c | 14 +-
hw/scsi/scsi-bus.c | 15 ++
hw/scsi/scsi-disk.c | 14 ++
include/hw/block/block.h | 22 +-
include/hw/scsi/scsi.h | 1 +
include/sysemu/sysemu.h | 4 +
tests/Makefile.include | 2 +-
tests/hd-geo-test.c | 566 +++++++++++++++++++++++++++++++++++++++++++++++
11 files changed, 764 insertions(+), 41 deletions(-)
--
2.13.3
^ permalink raw reply [flat|nested] 11+ messages in thread
* [Qemu-devel] [QEMU] [PATCH v3 1/8] block: Refactor macros - fix tabbing
2019-06-17 15:09 [Qemu-devel] [QEMU] [PATCH v3 0/8] Add Qemu to SeaBIOS LCHS interface Sam Eiderman
@ 2019-06-17 15:09 ` Sam Eiderman
2019-06-17 15:09 ` [Qemu-devel] [QEMU] [PATCH v3 2/8] block: Support providing LCHS from user Sam Eiderman
` (8 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Sam Eiderman @ 2019-06-17 15:09 UTC (permalink / raw)
To: kwolf, qemu-block, qemu-devel, mreitz, seabios, kraxel, kevin
Cc: liran.alon, shmuel.eiderman, karl.heubaum, arbel.moshe
Fixing tabbing in block related macros.
Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
---
hw/ide/qdev.c | 2 +-
include/hw/block/block.h | 16 ++++++++--------
2 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/hw/ide/qdev.c b/hw/ide/qdev.c
index 360cd20bd8..9cae3205df 100644
--- a/hw/ide/qdev.c
+++ b/hw/ide/qdev.c
@@ -285,7 +285,7 @@ static void ide_drive_realize(IDEDevice *dev, Error **errp)
DEFINE_BLOCK_PROPERTIES(IDEDrive, dev.conf), \
DEFINE_BLOCK_ERROR_PROPERTIES(IDEDrive, dev.conf), \
DEFINE_PROP_STRING("ver", IDEDrive, dev.version), \
- DEFINE_PROP_UINT64("wwn", IDEDrive, dev.wwn, 0), \
+ DEFINE_PROP_UINT64("wwn", IDEDrive, dev.wwn, 0), \
DEFINE_PROP_STRING("serial", IDEDrive, dev.serial),\
DEFINE_PROP_STRING("model", IDEDrive, dev.model)
diff --git a/include/hw/block/block.h b/include/hw/block/block.h
index 607539057a..fd55a30bca 100644
--- a/include/hw/block/block.h
+++ b/include/hw/block/block.h
@@ -50,21 +50,21 @@ static inline unsigned int get_physical_block_exp(BlockConf *conf)
_conf.logical_block_size), \
DEFINE_PROP_BLOCKSIZE("physical_block_size", _state, \
_conf.physical_block_size), \
- DEFINE_PROP_UINT16("min_io_size", _state, _conf.min_io_size, 0), \
+ DEFINE_PROP_UINT16("min_io_size", _state, _conf.min_io_size, 0), \
DEFINE_PROP_UINT32("opt_io_size", _state, _conf.opt_io_size, 0), \
- DEFINE_PROP_UINT32("discard_granularity", _state, \
- _conf.discard_granularity, -1), \
- DEFINE_PROP_ON_OFF_AUTO("write-cache", _state, _conf.wce, \
- ON_OFF_AUTO_AUTO), \
+ DEFINE_PROP_UINT32("discard_granularity", _state, \
+ _conf.discard_granularity, -1), \
+ DEFINE_PROP_ON_OFF_AUTO("write-cache", _state, _conf.wce, \
+ ON_OFF_AUTO_AUTO), \
DEFINE_PROP_BOOL("share-rw", _state, _conf.share_rw, false)
#define DEFINE_BLOCK_PROPERTIES(_state, _conf) \
DEFINE_PROP_DRIVE("drive", _state, _conf.blk), \
DEFINE_BLOCK_PROPERTIES_BASE(_state, _conf)
-#define DEFINE_BLOCK_CHS_PROPERTIES(_state, _conf) \
- DEFINE_PROP_UINT32("cyls", _state, _conf.cyls, 0), \
- DEFINE_PROP_UINT32("heads", _state, _conf.heads, 0), \
+#define DEFINE_BLOCK_CHS_PROPERTIES(_state, _conf) \
+ DEFINE_PROP_UINT32("cyls", _state, _conf.cyls, 0), \
+ DEFINE_PROP_UINT32("heads", _state, _conf.heads, 0), \
DEFINE_PROP_UINT32("secs", _state, _conf.secs, 0)
#define DEFINE_BLOCK_ERROR_PROPERTIES(_state, _conf) \
--
2.13.3
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [Qemu-devel] [QEMU] [PATCH v3 2/8] block: Support providing LCHS from user
2019-06-17 15:09 [Qemu-devel] [QEMU] [PATCH v3 0/8] Add Qemu to SeaBIOS LCHS interface Sam Eiderman
2019-06-17 15:09 ` [Qemu-devel] [QEMU] [PATCH v3 1/8] block: Refactor macros - fix tabbing Sam Eiderman
@ 2019-06-17 15:09 ` Sam Eiderman
2019-06-17 15:09 ` [Qemu-devel] [QEMU] [PATCH v3 3/8] bootdevice: Add interface to gather LCHS Sam Eiderman
` (7 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Sam Eiderman @ 2019-06-17 15:09 UTC (permalink / raw)
To: kwolf, qemu-block, qemu-devel, mreitz, seabios, kraxel, kevin
Cc: liran.alon, shmuel.eiderman, karl.heubaum, arbel.moshe
Add logical geometry variables to BlockConf.
A user can now supply "lcyls", "lheads" & "lsecs" for any HD device
that supports CHS ("cyls", "heads", "secs").
These devices include:
* ide-hd
* scsi-hd
* virtio-blk-pci
In future commits we will use the provided LCHS and pass it to the BIOS
through fw_cfg to be supplied using INT13 routines.
Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
---
include/hw/block/block.h | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/include/hw/block/block.h b/include/hw/block/block.h
index fd55a30bca..d7246f3862 100644
--- a/include/hw/block/block.h
+++ b/include/hw/block/block.h
@@ -26,6 +26,7 @@ typedef struct BlockConf {
uint32_t discard_granularity;
/* geometry, not all devices use this */
uint32_t cyls, heads, secs;
+ uint32_t lcyls, lheads, lsecs;
OnOffAuto wce;
bool share_rw;
BlockdevOnError rerror;
@@ -65,7 +66,10 @@ static inline unsigned int get_physical_block_exp(BlockConf *conf)
#define DEFINE_BLOCK_CHS_PROPERTIES(_state, _conf) \
DEFINE_PROP_UINT32("cyls", _state, _conf.cyls, 0), \
DEFINE_PROP_UINT32("heads", _state, _conf.heads, 0), \
- DEFINE_PROP_UINT32("secs", _state, _conf.secs, 0)
+ DEFINE_PROP_UINT32("secs", _state, _conf.secs, 0), \
+ DEFINE_PROP_UINT32("lcyls", _state, _conf.lcyls, 0), \
+ DEFINE_PROP_UINT32("lheads", _state, _conf.lheads, 0), \
+ DEFINE_PROP_UINT32("lsecs", _state, _conf.lsecs, 0)
#define DEFINE_BLOCK_ERROR_PROPERTIES(_state, _conf) \
DEFINE_PROP_BLOCKDEV_ON_ERROR("rerror", _state, _conf.rerror, \
--
2.13.3
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [Qemu-devel] [QEMU] [PATCH v3 3/8] bootdevice: Add interface to gather LCHS
2019-06-17 15:09 [Qemu-devel] [QEMU] [PATCH v3 0/8] Add Qemu to SeaBIOS LCHS interface Sam Eiderman
2019-06-17 15:09 ` [Qemu-devel] [QEMU] [PATCH v3 1/8] block: Refactor macros - fix tabbing Sam Eiderman
2019-06-17 15:09 ` [Qemu-devel] [QEMU] [PATCH v3 2/8] block: Support providing LCHS from user Sam Eiderman
@ 2019-06-17 15:09 ` Sam Eiderman
2019-06-17 15:09 ` [Qemu-devel] [QEMU] [PATCH v3 4/8] scsi: Propagate unrealize() callback to scsi-hd Sam Eiderman
` (6 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Sam Eiderman @ 2019-06-17 15:09 UTC (permalink / raw)
To: kwolf, qemu-block, qemu-devel, mreitz, seabios, kraxel, kevin
Cc: liran.alon, shmuel.eiderman, karl.heubaum, arbel.moshe
Add an interface to provide direct logical CHS values for boot devices.
We will use this interface in the next commits.
Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
---
bootdevice.c | 55 +++++++++++++++++++++++++++++++++++++++++++++++++
include/sysemu/sysemu.h | 3 +++
2 files changed, 58 insertions(+)
diff --git a/bootdevice.c b/bootdevice.c
index 1d225202f9..bc5e1c2de4 100644
--- a/bootdevice.c
+++ b/bootdevice.c
@@ -343,3 +343,58 @@ void device_add_bootindex_property(Object *obj, int32_t *bootindex,
/* initialize devices' bootindex property to -1 */
object_property_set_int(obj, -1, name, NULL);
}
+
+typedef struct FWLCHSEntry FWLCHSEntry;
+
+struct FWLCHSEntry {
+ QTAILQ_ENTRY(FWLCHSEntry) link;
+ DeviceState *dev;
+ char *suffix;
+ uint32_t lcyls;
+ uint32_t lheads;
+ uint32_t lsecs;
+};
+
+static QTAILQ_HEAD(, FWLCHSEntry) fw_lchs =
+ QTAILQ_HEAD_INITIALIZER(fw_lchs);
+
+void add_boot_device_lchs(DeviceState *dev, const char *suffix,
+ uint32_t lcyls, uint32_t lheads, uint32_t lsecs)
+{
+ FWLCHSEntry *node;
+
+ if (!lcyls && !lheads && !lsecs) {
+ return;
+ }
+
+ assert(dev != NULL || suffix != NULL);
+
+ node = g_malloc0(sizeof(FWLCHSEntry));
+ node->suffix = g_strdup(suffix);
+ node->dev = dev;
+ node->lcyls = lcyls;
+ node->lheads = lheads;
+ node->lsecs = lsecs;
+
+ QTAILQ_INSERT_TAIL(&fw_lchs, node, link);
+}
+
+void del_boot_device_lchs(DeviceState *dev, const char *suffix)
+{
+ FWLCHSEntry *i;
+
+ if (dev == NULL) {
+ return;
+ }
+
+ QTAILQ_FOREACH(i, &fw_lchs, link) {
+ if ((!suffix || !g_strcmp0(i->suffix, suffix)) &&
+ i->dev == dev) {
+ QTAILQ_REMOVE(&fw_lchs, i, link);
+ g_free(i->suffix);
+ g_free(i);
+
+ break;
+ }
+ }
+}
diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h
index 61579ae71e..173dfbb539 100644
--- a/include/sysemu/sysemu.h
+++ b/include/sysemu/sysemu.h
@@ -171,6 +171,9 @@ void device_add_bootindex_property(Object *obj, int32_t *bootindex,
DeviceState *dev, Error **errp);
void restore_boot_order(void *opaque);
void validate_bootdevices(const char *devices, Error **errp);
+void add_boot_device_lchs(DeviceState *dev, const char *suffix,
+ uint32_t lcyls, uint32_t lheads, uint32_t lsecs);
+void del_boot_device_lchs(DeviceState *dev, const char *suffix);
/* handler to set the boot_device order for a specific type of MachineClass */
typedef void QEMUBootSetHandler(void *opaque, const char *boot_order,
--
2.13.3
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [Qemu-devel] [QEMU] [PATCH v3 4/8] scsi: Propagate unrealize() callback to scsi-hd
2019-06-17 15:09 [Qemu-devel] [QEMU] [PATCH v3 0/8] Add Qemu to SeaBIOS LCHS interface Sam Eiderman
` (2 preceding siblings ...)
2019-06-17 15:09 ` [Qemu-devel] [QEMU] [PATCH v3 3/8] bootdevice: Add interface to gather LCHS Sam Eiderman
@ 2019-06-17 15:09 ` Sam Eiderman
2019-06-17 15:09 ` [Qemu-devel] [QEMU] [PATCH v3 5/8] bootdevice: Gather LCHS from all relevant devices Sam Eiderman
` (5 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Sam Eiderman @ 2019-06-17 15:09 UTC (permalink / raw)
To: kwolf, qemu-block, qemu-devel, mreitz, seabios, kraxel, kevin
Cc: liran.alon, shmuel.eiderman, karl.heubaum, arbel.moshe
We will need to add LCHS removal logic to scsi-hd's unrealize() in the
next commit.
Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
---
hw/scsi/scsi-bus.c | 15 +++++++++++++++
include/hw/scsi/scsi.h | 1 +
2 files changed, 16 insertions(+)
diff --git a/hw/scsi/scsi-bus.c b/hw/scsi/scsi-bus.c
index c480553083..f6fe497a1a 100644
--- a/hw/scsi/scsi-bus.c
+++ b/hw/scsi/scsi-bus.c
@@ -55,6 +55,14 @@ static void scsi_device_realize(SCSIDevice *s, Error **errp)
}
}
+static void scsi_device_unrealize(SCSIDevice *s, Error **errp)
+{
+ SCSIDeviceClass *sc = SCSI_DEVICE_GET_CLASS(s);
+ if (sc->unrealize) {
+ sc->unrealize(s, errp);
+ }
+}
+
int scsi_bus_parse_cdb(SCSIDevice *dev, SCSICommand *cmd, uint8_t *buf,
void *hba_private)
{
@@ -213,11 +221,18 @@ static void scsi_qdev_realize(DeviceState *qdev, Error **errp)
static void scsi_qdev_unrealize(DeviceState *qdev, Error **errp)
{
SCSIDevice *dev = SCSI_DEVICE(qdev);
+ Error *local_err = NULL;
if (dev->vmsentry) {
qemu_del_vm_change_state_handler(dev->vmsentry);
}
+ scsi_device_unrealize(dev, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ return;
+ }
+
scsi_device_purge_requests(dev, SENSE_CODE(NO_SENSE));
blockdev_mark_auto_del(dev->conf.blk);
}
diff --git a/include/hw/scsi/scsi.h b/include/hw/scsi/scsi.h
index 426566a5c6..8cf71f910d 100644
--- a/include/hw/scsi/scsi.h
+++ b/include/hw/scsi/scsi.h
@@ -59,6 +59,7 @@ struct SCSIRequest {
typedef struct SCSIDeviceClass {
DeviceClass parent_class;
void (*realize)(SCSIDevice *dev, Error **errp);
+ void (*unrealize)(SCSIDevice *dev, Error **errp);
int (*parse_cdb)(SCSIDevice *dev, SCSICommand *cmd, uint8_t *buf,
void *hba_private);
SCSIRequest *(*alloc_req)(SCSIDevice *s, uint32_t tag, uint32_t lun,
--
2.13.3
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [Qemu-devel] [QEMU] [PATCH v3 5/8] bootdevice: Gather LCHS from all relevant devices
2019-06-17 15:09 [Qemu-devel] [QEMU] [PATCH v3 0/8] Add Qemu to SeaBIOS LCHS interface Sam Eiderman
` (3 preceding siblings ...)
2019-06-17 15:09 ` [Qemu-devel] [QEMU] [PATCH v3 4/8] scsi: Propagate unrealize() callback to scsi-hd Sam Eiderman
@ 2019-06-17 15:09 ` Sam Eiderman
2019-06-17 15:09 ` [Qemu-devel] [QEMU] [PATCH v3 6/8] bootdevice: Refactor get_boot_devices_list Sam Eiderman
` (4 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Sam Eiderman @ 2019-06-17 15:09 UTC (permalink / raw)
To: kwolf, qemu-block, qemu-devel, mreitz, seabios, kraxel, kevin
Cc: liran.alon, shmuel.eiderman, karl.heubaum, arbel.moshe
Relevant devices are:
* ide-hd (and ide-cd, ide-drive)
* scsi-hd (and scsi-cd, scsi-disk, scsi-block)
* virtio-blk-pci
We do not call del_boot_device_lchs() for ide-* since we don't need to -
IDE block devices do not support unplugging.
Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
---
hw/block/virtio-blk.c | 6 ++++++
hw/ide/qdev.c | 5 +++++
hw/scsi/scsi-disk.c | 14 ++++++++++++++
3 files changed, 25 insertions(+)
diff --git a/hw/block/virtio-blk.c b/hw/block/virtio-blk.c
index 06e57a4d39..787bbd768a 100644
--- a/hw/block/virtio-blk.c
+++ b/hw/block/virtio-blk.c
@@ -1182,6 +1182,11 @@ static void virtio_blk_device_realize(DeviceState *dev, Error **errp)
blk_set_guest_block_size(s->blk, s->conf.conf.logical_block_size);
blk_iostatus_enable(s->blk);
+
+ add_boot_device_lchs(dev, "/disk@0,0",
+ (&conf->conf)->lcyls,
+ (&conf->conf)->lheads,
+ (&conf->conf)->lsecs);
}
static void virtio_blk_device_unrealize(DeviceState *dev, Error **errp)
@@ -1189,6 +1194,7 @@ static void virtio_blk_device_unrealize(DeviceState *dev, Error **errp)
VirtIODevice *vdev = VIRTIO_DEVICE(dev);
VirtIOBlock *s = VIRTIO_BLK(dev);
+ del_boot_device_lchs(dev, "/disk@0,0");
virtio_blk_data_plane_destroy(s->dataplane);
s->dataplane = NULL;
qemu_del_vm_change_state_handler(s->change);
diff --git a/hw/ide/qdev.c b/hw/ide/qdev.c
index 9cae3205df..07f429d5e3 100644
--- a/hw/ide/qdev.c
+++ b/hw/ide/qdev.c
@@ -215,6 +215,11 @@ static void ide_dev_initfn(IDEDevice *dev, IDEDriveKind kind, Error **errp)
add_boot_device_path(dev->conf.bootindex, &dev->qdev,
dev->unit ? "/disk@1" : "/disk@0");
+
+ add_boot_device_lchs(&dev->qdev, dev->unit ? "/disk@1" : "/disk@0",
+ (&dev->conf)->lcyls,
+ (&dev->conf)->lheads,
+ (&dev->conf)->lsecs);
}
static void ide_dev_get_bootindex(Object *obj, Visitor *v, const char *name,
diff --git a/hw/scsi/scsi-disk.c b/hw/scsi/scsi-disk.c
index 7b89ac798b..3451aefdea 100644
--- a/hw/scsi/scsi-disk.c
+++ b/hw/scsi/scsi-disk.c
@@ -2390,6 +2390,16 @@ static void scsi_realize(SCSIDevice *dev, Error **errp)
blk_set_guest_block_size(s->qdev.conf.blk, s->qdev.blocksize);
blk_iostatus_enable(s->qdev.conf.blk);
+
+ add_boot_device_lchs(&dev->qdev, NULL,
+ (&dev->conf)->lcyls,
+ (&dev->conf)->lheads,
+ (&dev->conf)->lsecs);
+}
+
+static void scsi_unrealize(SCSIDevice *dev, Error **errp)
+{
+ del_boot_device_lchs(&dev->qdev, NULL);
}
static void scsi_hd_realize(SCSIDevice *dev, Error **errp)
@@ -2988,6 +2998,7 @@ static void scsi_hd_class_initfn(ObjectClass *klass, void *data)
SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);
sc->realize = scsi_hd_realize;
+ sc->unrealize = scsi_unrealize;
sc->alloc_req = scsi_new_request;
sc->unit_attention_reported = scsi_disk_unit_attention_reported;
dc->desc = "virtual SCSI disk";
@@ -3019,6 +3030,7 @@ static void scsi_cd_class_initfn(ObjectClass *klass, void *data)
SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);
sc->realize = scsi_cd_realize;
+ sc->unrealize = scsi_unrealize;
sc->alloc_req = scsi_new_request;
sc->unit_attention_reported = scsi_disk_unit_attention_reported;
dc->desc = "virtual SCSI CD-ROM";
@@ -3054,6 +3066,7 @@ static void scsi_block_class_initfn(ObjectClass *klass, void *data)
SCSIDiskClass *sdc = SCSI_DISK_BASE_CLASS(klass);
sc->realize = scsi_block_realize;
+ sc->unrealize = scsi_unrealize;
sc->alloc_req = scsi_block_new_request;
sc->parse_cdb = scsi_block_parse_cdb;
sdc->dma_readv = scsi_block_dma_readv;
@@ -3095,6 +3108,7 @@ static void scsi_disk_class_initfn(ObjectClass *klass, void *data)
SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);
sc->realize = scsi_disk_realize;
+ sc->unrealize = scsi_unrealize;
sc->alloc_req = scsi_new_request;
sc->unit_attention_reported = scsi_disk_unit_attention_reported;
dc->fw_name = "disk";
--
2.13.3
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [Qemu-devel] [QEMU] [PATCH v3 6/8] bootdevice: Refactor get_boot_devices_list
2019-06-17 15:09 [Qemu-devel] [QEMU] [PATCH v3 0/8] Add Qemu to SeaBIOS LCHS interface Sam Eiderman
` (4 preceding siblings ...)
2019-06-17 15:09 ` [Qemu-devel] [QEMU] [PATCH v3 5/8] bootdevice: Gather LCHS from all relevant devices Sam Eiderman
@ 2019-06-17 15:09 ` Sam Eiderman
2019-06-17 15:09 ` [Qemu-devel] [QEMU] [PATCH v3 7/8] bootdevice: FW_CFG interface for LCHS values Sam Eiderman
` (3 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Sam Eiderman @ 2019-06-17 15:09 UTC (permalink / raw)
To: kwolf, qemu-block, qemu-devel, mreitz, seabios, kraxel, kevin
Cc: liran.alon, shmuel.eiderman, karl.heubaum, arbel.moshe
Move device name construction to a separate function.
We will reuse this function in the following commit to pass logical CHS
parameters through fw_cfg much like we currently pass bootindex.
Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
---
bootdevice.c | 61 +++++++++++++++++++++++++++++++++---------------------------
1 file changed, 34 insertions(+), 27 deletions(-)
diff --git a/bootdevice.c b/bootdevice.c
index bc5e1c2de4..2b12fb85a4 100644
--- a/bootdevice.c
+++ b/bootdevice.c
@@ -202,6 +202,39 @@ DeviceState *get_boot_device(uint32_t position)
return res;
}
+static char *get_boot_device_path(DeviceState *dev, bool ignore_suffixes,
+ char *suffix)
+{
+ char *devpath = NULL, *s = NULL, *d, *bootpath;
+
+ if (dev) {
+ devpath = qdev_get_fw_dev_path(dev);
+ assert(devpath);
+ }
+
+ if (!ignore_suffixes) {
+ if (dev) {
+ d = qdev_get_own_fw_dev_path_from_handler(dev->parent_bus, dev);
+ if (d) {
+ assert(!suffix);
+ s = d;
+ } else {
+ s = g_strdup(suffix);
+ }
+ } else {
+ s = g_strdup(suffix);
+ }
+ }
+
+ bootpath = g_strdup_printf("%s%s",
+ devpath ? devpath : "",
+ s ? s : "");
+ g_free(devpath);
+ g_free(s);
+
+ return bootpath;
+}
+
/*
* This function returns null terminated string that consist of new line
* separated device paths.
@@ -218,36 +251,10 @@ char *get_boot_devices_list(size_t *size)
bool ignore_suffixes = mc->ignore_boot_device_suffixes;
QTAILQ_FOREACH(i, &fw_boot_order, link) {
- char *devpath = NULL, *suffix = NULL;
char *bootpath;
- char *d;
size_t len;
- if (i->dev) {
- devpath = qdev_get_fw_dev_path(i->dev);
- assert(devpath);
- }
-
- if (!ignore_suffixes) {
- if (i->dev) {
- d = qdev_get_own_fw_dev_path_from_handler(i->dev->parent_bus,
- i->dev);
- if (d) {
- assert(!i->suffix);
- suffix = d;
- } else {
- suffix = g_strdup(i->suffix);
- }
- } else {
- suffix = g_strdup(i->suffix);
- }
- }
-
- bootpath = g_strdup_printf("%s%s",
- devpath ? devpath : "",
- suffix ? suffix : "");
- g_free(devpath);
- g_free(suffix);
+ bootpath = get_boot_device_path(i->dev, ignore_suffixes, i->suffix);
if (total) {
list[total-1] = '\n';
--
2.13.3
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [Qemu-devel] [QEMU] [PATCH v3 7/8] bootdevice: FW_CFG interface for LCHS values
2019-06-17 15:09 [Qemu-devel] [QEMU] [PATCH v3 0/8] Add Qemu to SeaBIOS LCHS interface Sam Eiderman
` (5 preceding siblings ...)
2019-06-17 15:09 ` [Qemu-devel] [QEMU] [PATCH v3 6/8] bootdevice: Refactor get_boot_devices_list Sam Eiderman
@ 2019-06-17 15:09 ` Sam Eiderman
2019-06-17 15:09 ` [Qemu-devel] [QEMU] [PATCH v3 8/8] hd-geo-test: Add tests for lchs override Sam Eiderman
` (2 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Sam Eiderman @ 2019-06-17 15:09 UTC (permalink / raw)
To: kwolf, qemu-block, qemu-devel, mreitz, seabios, kraxel, kevin
Cc: liran.alon, shmuel.eiderman, karl.heubaum, arbel.moshe
Using fw_cfg, supply logical CHS values directly from QEMU to the BIOS.
Non-standard logical geometries break under QEMU.
A virtual disk which contains an operating system which depends on
logical geometries (consistent values being reported from BIOS INT13
AH=08) will most likely break under QEMU/SeaBIOS if it has non-standard
logical geometries - for example 56 SPT (sectors per track).
No matter what QEMU will report - SeaBIOS, for large enough disks - will
use LBA translation, which will report 63 SPT instead.
In addition we cannot force SeaBIOS to rely on physical geometries at
all. A virtio-blk-pci virtual disk with 255 phyiscal heads cannot
report more than 16 physical heads when moved to an IDE controller,
since the ATA spec allows a maximum of 16 heads - this is an artifact of
virtualization.
By supplying the logical geometries directly we are able to support such
"exotic" disks.
We serialize this information in a similar way to the "bootorder"
interface.
The new fw_cfg entry is "bios-geometry".
Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
---
bootdevice.c | 38 ++++++++++++++++++++++++++++++++++++++
hw/nvram/fw_cfg.c | 14 +++++++++++---
include/sysemu/sysemu.h | 1 +
3 files changed, 50 insertions(+), 3 deletions(-)
diff --git a/bootdevice.c b/bootdevice.c
index 2b12fb85a4..5cd88f7fbf 100644
--- a/bootdevice.c
+++ b/bootdevice.c
@@ -405,3 +405,41 @@ void del_boot_device_lchs(DeviceState *dev, const char *suffix)
}
}
}
+
+typedef struct QEMU_PACKED FWLCHSEntrySerialized {
+ /* Little-endian. */
+ uint32_t lcyls;
+ uint32_t lheads;
+ uint32_t lsecs;
+} FWLCHSEntrySerialized;
+
+/* Serialized as: (device name\0 + lchs struct) x devices */
+char *get_boot_devices_lchs_list(size_t *size)
+{
+ FWLCHSEntry *i;
+ FWLCHSEntrySerialized s;
+ size_t total = 0;
+ char *list = NULL;
+
+ QTAILQ_FOREACH(i, &fw_lchs, link) {
+ char *bootpath;
+ size_t len;
+
+ bootpath = get_boot_device_path(i->dev, false, i->suffix);
+ s.lcyls = cpu_to_le32(i->lcyls);
+ s.lheads = cpu_to_le32(i->lheads);
+ s.lsecs = cpu_to_le32(i->lsecs);
+
+ len = strlen(bootpath) + 1;
+ list = g_realloc(list, total + len + sizeof(s));
+ memcpy(&list[total], bootpath, len);
+ memcpy(&list[total + len], &s, sizeof(s));
+ total += len + sizeof(s);
+
+ g_free(bootpath);
+ }
+
+ *size = total;
+
+ return list;
+}
diff --git a/hw/nvram/fw_cfg.c b/hw/nvram/fw_cfg.c
index 9f7b7789bc..c1230fe11c 100644
--- a/hw/nvram/fw_cfg.c
+++ b/hw/nvram/fw_cfg.c
@@ -916,13 +916,21 @@ void *fw_cfg_modify_file(FWCfgState *s, const char *filename,
static void fw_cfg_machine_reset(void *opaque)
{
+ MachineClass *mc = MACHINE_GET_CLASS(qdev_get_machine());
+ FWCfgState *s = opaque;
void *ptr;
size_t len;
- FWCfgState *s = opaque;
- char *bootindex = get_boot_devices_list(&len);
+ char *buf;
- ptr = fw_cfg_modify_file(s, "bootorder", (uint8_t *)bootindex, len);
+ buf = get_boot_devices_list(&len);
+ ptr = fw_cfg_modify_file(s, "bootorder", (uint8_t *)buf, len);
g_free(ptr);
+
+ if (!mc->legacy_fw_cfg_order) {
+ buf = get_boot_devices_lchs_list(&len);
+ ptr = fw_cfg_modify_file(s, "bios-geometry", (uint8_t *)buf, len);
+ g_free(ptr);
+ }
}
static void fw_cfg_machine_ready(struct Notifier *n, void *data)
diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h
index 173dfbb539..1ca8799588 100644
--- a/include/sysemu/sysemu.h
+++ b/include/sysemu/sysemu.h
@@ -174,6 +174,7 @@ void validate_bootdevices(const char *devices, Error **errp);
void add_boot_device_lchs(DeviceState *dev, const char *suffix,
uint32_t lcyls, uint32_t lheads, uint32_t lsecs);
void del_boot_device_lchs(DeviceState *dev, const char *suffix);
+char *get_boot_devices_lchs_list(size_t *size);
/* handler to set the boot_device order for a specific type of MachineClass */
typedef void QEMUBootSetHandler(void *opaque, const char *boot_order,
--
2.13.3
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [Qemu-devel] [QEMU] [PATCH v3 8/8] hd-geo-test: Add tests for lchs override
2019-06-17 15:09 [Qemu-devel] [QEMU] [PATCH v3 0/8] Add Qemu to SeaBIOS LCHS interface Sam Eiderman
` (6 preceding siblings ...)
2019-06-17 15:09 ` [Qemu-devel] [QEMU] [PATCH v3 7/8] bootdevice: FW_CFG interface for LCHS values Sam Eiderman
@ 2019-06-17 15:09 ` Sam Eiderman
2019-06-17 16:31 ` [Qemu-devel] [SeaBIOS] [QEMU] [PATCH v3 0/8] Add Qemu to SeaBIOS LCHS interface no-reply
2019-06-17 16:45 ` no-reply
9 siblings, 0 replies; 11+ messages in thread
From: Sam Eiderman @ 2019-06-17 15:09 UTC (permalink / raw)
To: kwolf, qemu-block, qemu-devel, mreitz, seabios, kraxel, kevin
Cc: liran.alon, shmuel.eiderman, karl.heubaum, arbel.moshe
Add QTest tests to check the logical geometry override option.
The tests in hd-geo-test are out of date - they only test IDE and do not
test interesting MBRs.
I added a few helper functions which will make adding more tests easier.
QTest's fw_cfg helper functions support only legacy fw_cfg, so I had to
read the new fw_cfg layout on my own.
Creating qcow2 disks with specific size and MBR layout is currently
unused - we only use a default empty MBR.
Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
---
tests/Makefile.include | 2 +-
tests/hd-geo-test.c | 566 +++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 567 insertions(+), 1 deletion(-)
diff --git a/tests/Makefile.include b/tests/Makefile.include
index 46a36c2c95..55ea165ed4 100644
--- a/tests/Makefile.include
+++ b/tests/Makefile.include
@@ -765,7 +765,7 @@ tests/ide-test$(EXESUF): tests/ide-test.o $(libqos-pc-obj-y)
tests/ahci-test$(EXESUF): tests/ahci-test.o $(libqos-pc-obj-y) qemu-img$(EXESUF)
tests/ipmi-kcs-test$(EXESUF): tests/ipmi-kcs-test.o
tests/ipmi-bt-test$(EXESUF): tests/ipmi-bt-test.o
-tests/hd-geo-test$(EXESUF): tests/hd-geo-test.o
+tests/hd-geo-test$(EXESUF): tests/hd-geo-test.o $(libqos-obj-y)
tests/boot-order-test$(EXESUF): tests/boot-order-test.o $(libqos-obj-y)
tests/boot-serial-test$(EXESUF): tests/boot-serial-test.o $(libqos-obj-y)
tests/bios-tables-test$(EXESUF): tests/bios-tables-test.o \
diff --git a/tests/hd-geo-test.c b/tests/hd-geo-test.c
index 62eb624726..8c523d51e6 100644
--- a/tests/hd-geo-test.c
+++ b/tests/hd-geo-test.c
@@ -17,7 +17,12 @@
#include "qemu/osdep.h"
#include "qemu-common.h"
+#include "qemu/bswap.h"
+#include "qapi/qmp/qlist.h"
#include "libqtest.h"
+#include "libqos/fw_cfg.h"
+#include "libqos/libqos.h"
+#include "standard-headers/linux/qemu_fw_cfg.h"
#define ARGV_SIZE 256
@@ -388,6 +393,552 @@ static void test_ide_drive_cd_0(void)
qtest_quit(qts);
}
+typedef struct {
+ bool active;
+ uint32_t head;
+ uint32_t sector;
+ uint32_t cyl;
+ uint32_t end_head;
+ uint32_t end_sector;
+ uint32_t end_cyl;
+ uint32_t start_sect;
+ uint32_t nr_sects;
+} MBRpartitions[4];
+
+static MBRpartitions empty_mbr = { {false, 0, 0, 0, 0, 0, 0, 0, 0},
+ {false, 0, 0, 0, 0, 0, 0, 0, 0},
+ {false, 0, 0, 0, 0, 0, 0, 0, 0},
+ {false, 0, 0, 0, 0, 0, 0, 0, 0} };
+
+static char *create_qcow2_with_mbr(MBRpartitions mbr, uint64_t sectors)
+{
+ const char *template = "/tmp/qtest.XXXXXX";
+ char *raw_path = strdup(template);
+ char *qcow2_path = strdup(template);
+ char cmd[100 + 2 * PATH_MAX];
+ uint8_t buf[512];
+ int i, ret, fd, offset;
+ uint64_t qcow2_size = sectors * 512;
+ uint8_t status, parttype, head, sector, cyl;
+
+ offset = 0xbe;
+
+ for (i = 0; i < 4; i++) {
+ status = mbr[i].active ? 0x80 : 0x00;
+ g_assert(mbr[i].head < 256);
+ g_assert(mbr[i].sector < 64);
+ g_assert(mbr[i].cyl < 1024);
+ head = mbr[i].head;
+ sector = mbr[i].sector + ((mbr[i].cyl & 0x300) >> 2);
+ cyl = mbr[i].cyl & 0xff;
+
+ buf[offset + 0x0] = status;
+ buf[offset + 0x1] = head;
+ buf[offset + 0x2] = sector;
+ buf[offset + 0x3] = cyl;
+
+ parttype = 0;
+ g_assert(mbr[i].end_head < 256);
+ g_assert(mbr[i].end_sector < 64);
+ g_assert(mbr[i].end_cyl < 1024);
+ head = mbr[i].end_head;
+ sector = mbr[i].end_sector + ((mbr[i].end_cyl & 0x300) >> 2);
+ cyl = mbr[i].end_cyl & 0xff;
+
+ buf[offset + 0x4] = parttype;
+ buf[offset + 0x5] = head;
+ buf[offset + 0x6] = sector;
+ buf[offset + 0x7] = cyl;
+
+ (*(uint32_t *)&buf[offset + 0x8]) = cpu_to_le32(mbr[i].start_sect);
+ (*(uint32_t *)&buf[offset + 0xc]) = cpu_to_le32(mbr[i].nr_sects);
+
+ offset += 0x10;
+ }
+
+ fd = mkstemp(raw_path);
+ g_assert(fd);
+ close(fd);
+
+ fd = open(raw_path, O_WRONLY);
+ g_assert(fd >= 0);
+ ret = write(fd, buf, sizeof(buf));
+ g_assert(ret == sizeof(buf));
+ close(fd);
+
+ fd = mkstemp(qcow2_path);
+ g_assert(fd);
+ close(fd);
+
+ ret = snprintf(cmd, sizeof(cmd),
+ "$QTEST_QEMU_IMG convert -f raw -O qcow2 %s %s > /dev/null",
+ raw_path, qcow2_path);
+ g_assert((0 < ret) && (ret <= sizeof(cmd)));
+ ret = system(cmd);
+ g_assert(ret == 0);
+
+ ret = snprintf(cmd, sizeof(cmd),
+ "$QTEST_QEMU_IMG resize %s %" PRIu64 " > /dev/null",
+ qcow2_path, qcow2_size);
+ g_assert((0 < ret) && (ret <= sizeof(cmd)));
+ ret = system(cmd);
+ g_assert(ret == 0);
+
+ unlink(raw_path);
+ free(raw_path);
+
+ return qcow2_path;
+}
+
+struct QemuCfgFile {
+ uint32_t size; /* file size */
+ uint16_t select; /* write this to 0x510 to read it */
+ uint16_t reserved;
+ char name[56];
+};
+
+static uint16_t find_fw_cfg_file(QFWCFG *fw_cfg,
+ const char *filename)
+{
+ struct QemuCfgFile qfile;
+ uint32_t count, e;
+ uint16_t select;
+
+ count = qfw_cfg_get_u32(fw_cfg, FW_CFG_FILE_DIR);
+ count = be32_to_cpu(count);
+ for (select = 0, e = 0; e < count; e++) {
+ qfw_cfg_read_data(fw_cfg, &qfile, sizeof(qfile));
+ if (!strcmp(filename, qfile.name)) {
+ select = be16_to_cpu(qfile.select);
+ }
+ }
+
+ return select;
+}
+
+static void read_fw_cfg_file(QFWCFG *fw_cfg,
+ const char *filename,
+ void *data,
+ size_t len)
+{
+ uint16_t select = find_fw_cfg_file(fw_cfg, filename);
+
+ g_assert(select);
+
+ qfw_cfg_get(fw_cfg, select, data, len);
+}
+
+#define BIOS_GEOMETRY_MAX_SIZE 10000
+
+typedef struct {
+ uint32_t c;
+ uint32_t h;
+ uint32_t s;
+} CHS;
+
+typedef struct {
+ const char *dev_path;
+ CHS chs;
+} CHSResult;
+
+static void read_bootdevices(QFWCFG *fw_cfg, CHSResult expected[])
+{
+ char *buf = g_malloc0(BIOS_GEOMETRY_MAX_SIZE);
+ void *cur;
+ char *name;
+ CHS *chs;
+ GList *results = NULL, *cur_result;
+ CHSResult *r;
+ int i;
+ bool found;
+
+ read_fw_cfg_file(fw_cfg, "bios-geometry", buf, BIOS_GEOMETRY_MAX_SIZE);
+
+ cur = buf;
+
+ while (strlen(cur)) {
+ name = cur;
+ chs = cur + strlen(cur) + 1;
+
+ r = g_malloc0(sizeof(*r));
+ r->dev_path = name;
+ r->chs.c = le32_to_cpu(chs->c);
+ r->chs.h = le32_to_cpu(chs->h);
+ r->chs.s = le32_to_cpu(chs->s);
+
+ results = g_list_prepend(results, r);
+
+ cur += strlen(cur) + 1 + sizeof(*chs);
+ }
+
+ i = 0;
+
+ while (expected[i].dev_path) {
+ found = false;
+ cur_result = results;
+ while (cur_result) {
+ r = cur_result->data;
+ if (!strcmp(r->dev_path, expected[i].dev_path) &&
+ !memcmp(&(r->chs), &(expected[i].chs), sizeof(r->chs))) {
+ found = true;
+ break;
+ }
+ cur_result = g_list_next(cur_result);
+ }
+ g_assert(found);
+ g_free(cur_result->data);
+ results = g_list_delete_link(results, cur_result);
+ i++;
+ }
+
+ g_assert(results == NULL);
+
+ g_free(buf);
+}
+
+#define MAX_DRIVES 30
+
+typedef struct {
+ char **argv;
+ int argc;
+ char **drives;
+ int n_drives;
+ int n_scsi_disks;
+ int n_scsi_controllers;
+ int n_virtio_disks;
+} TestArgs;
+
+static TestArgs *create_args(void)
+{
+ TestArgs *args = g_malloc0(sizeof(*args));
+ args->argv = g_new0(char *, ARGV_SIZE);
+ args->argc = append_arg(args->argc, args->argv,
+ ARGV_SIZE, g_strdup("-nodefaults"));
+ args->drives = g_new0(char *, MAX_DRIVES);
+ return args;
+}
+
+static void add_drive_with_mbr(TestArgs *args,
+ MBRpartitions mbr, uint64_t sectors)
+{
+ char *img_file_name;
+ char part[300];
+ int ret;
+
+ g_assert(args->n_drives < MAX_DRIVES);
+
+ img_file_name = create_qcow2_with_mbr(mbr, sectors);
+
+ args->drives[args->n_drives] = img_file_name;
+ ret = snprintf(part, sizeof(part),
+ "-drive file=%s,if=none,format=qcow2,id=disk%d",
+ img_file_name, args->n_drives);
+ g_assert((0 < ret) && (ret <= sizeof(part)));
+ args->argc = append_arg(args->argc, args->argv, ARGV_SIZE, g_strdup(part));
+ args->n_drives++;
+}
+
+static void add_ide_disk(TestArgs *args,
+ int drive_idx, int bus, int unit, int c, int h, int s)
+{
+ char part[300];
+ int ret;
+
+ ret = snprintf(part, sizeof(part),
+ "-device ide-hd,drive=disk%d,bus=ide.%d,unit=%d,"
+ "lcyls=%d,lheads=%d,lsecs=%d",
+ drive_idx, bus, unit, c, h, s);
+ g_assert((0 < ret) && (ret <= sizeof(part)));
+ args->argc = append_arg(args->argc, args->argv, ARGV_SIZE, g_strdup(part));
+}
+
+static void add_scsi_controller(TestArgs *args,
+ const char *type,
+ const char *bus,
+ int addr)
+{
+ char part[300];
+ int ret;
+
+ ret = snprintf(part, sizeof(part),
+ "-device %s,id=scsi%d,bus=%s,addr=%d",
+ type, args->n_scsi_controllers, bus, addr);
+ g_assert((0 < ret) && (ret <= sizeof(part)));
+ args->argc = append_arg(args->argc, args->argv, ARGV_SIZE, g_strdup(part));
+ args->n_scsi_controllers++;
+}
+
+static void add_scsi_disk(TestArgs *args,
+ int drive_idx, int bus,
+ int channel, int scsi_id, int lun,
+ int c, int h, int s)
+{
+ char part[300];
+ int ret;
+
+ ret = snprintf(part, sizeof(part),
+ "-device scsi-hd,id=scsi-disk%d,drive=disk%d,"
+ "bus=scsi%d.0,"
+ "channel=%d,scsi-id=%d,lun=%d,"
+ "lcyls=%d,lheads=%d,lsecs=%d",
+ args->n_scsi_disks, drive_idx, bus, channel, scsi_id, lun,
+ c, h, s);
+ g_assert((0 < ret) && (ret <= sizeof(part)));
+ args->argc = append_arg(args->argc, args->argv, ARGV_SIZE, g_strdup(part));
+ args->n_scsi_disks++;
+}
+
+static void add_virtio_disk(TestArgs *args,
+ int drive_idx, const char *bus, int addr,
+ int c, int h, int s)
+{
+ char part[300];
+ int ret;
+
+ ret = snprintf(part, sizeof(part),
+ "-device virtio-blk-pci,id=virtio-disk%d,"
+ "drive=disk%d,bus=%s,addr=%d,"
+ "lcyls=%d,lheads=%d,lsecs=%d",
+ args->n_virtio_disks, drive_idx, bus, addr, c, h, s);
+ g_assert((0 < ret) && (ret <= sizeof(part)));
+ args->argc = append_arg(args->argc, args->argv, ARGV_SIZE, g_strdup(part));
+ args->n_virtio_disks++;
+}
+
+static void test_override(TestArgs *args, CHSResult expected[])
+{
+ char *joined_args;
+ QFWCFG *fw_cfg;
+ int i;
+
+ joined_args = g_strjoinv(" ", args->argv);
+
+ qtest_start(joined_args);
+ fw_cfg = pc_fw_cfg_init(global_qtest);
+
+ read_bootdevices(fw_cfg, expected);
+
+ g_free(joined_args);
+ qtest_end();
+
+ g_free(fw_cfg);
+
+ for (i = 0; i < args->n_drives; i++) {
+ unlink(args->drives[i]);
+ free(args->drives[i]);
+ }
+ g_free(args->drives);
+ g_strfreev(args->argv);
+ g_free(args);
+}
+
+static void test_override_ide(void)
+{
+ TestArgs *args = create_args();
+ CHSResult expected[] = {
+ {"/pci@i0cf8/ide@1,1/drive@0/disk@0", {10000, 120, 30} },
+ {"/pci@i0cf8/ide@1,1/drive@0/disk@1", {9000, 120, 30} },
+ {"/pci@i0cf8/ide@1,1/drive@1/disk@0", {0, 1, 1} },
+ {"/pci@i0cf8/ide@1,1/drive@1/disk@1", {1, 0, 0} },
+ {NULL, {0, 0, 0} }
+ };
+ add_drive_with_mbr(args, empty_mbr, 1);
+ add_drive_with_mbr(args, empty_mbr, 1);
+ add_drive_with_mbr(args, empty_mbr, 1);
+ add_drive_with_mbr(args, empty_mbr, 1);
+ add_ide_disk(args, 0, 0, 0, 10000, 120, 30);
+ add_ide_disk(args, 1, 0, 1, 9000, 120, 30);
+ add_ide_disk(args, 2, 1, 0, 0, 1, 1);
+ add_ide_disk(args, 3, 1, 1, 1, 0, 0);
+ test_override(args, expected);
+}
+
+static void test_override_scsi(void)
+{
+ TestArgs *args = create_args();
+ CHSResult expected[] = {
+ {"/pci@i0cf8/scsi@3/channel@0/disk@0,0", {10000, 120, 30} },
+ {"/pci@i0cf8/scsi@3/channel@0/disk@1,0", {9000, 120, 30} },
+ {"/pci@i0cf8/scsi@3/channel@0/disk@2,0", {1, 0, 0} },
+ {"/pci@i0cf8/scsi@3/channel@0/disk@3,0", {0, 1, 0} },
+ {NULL, {0, 0, 0} }
+ };
+ add_drive_with_mbr(args, empty_mbr, 1);
+ add_drive_with_mbr(args, empty_mbr, 1);
+ add_drive_with_mbr(args, empty_mbr, 1);
+ add_drive_with_mbr(args, empty_mbr, 1);
+ add_scsi_controller(args, "lsi53c895a", "pci.0", 3);
+ add_scsi_disk(args, 0, 0, 0, 0, 0, 10000, 120, 30);
+ add_scsi_disk(args, 1, 0, 0, 1, 0, 9000, 120, 30);
+ add_scsi_disk(args, 2, 0, 0, 2, 0, 1, 0, 0);
+ add_scsi_disk(args, 3, 0, 0, 3, 0, 0, 1, 0);
+ test_override(args, expected);
+}
+
+static void test_override_scsi_2_controllers(void)
+{
+ TestArgs *args = create_args();
+ CHSResult expected[] = {
+ {"/pci@i0cf8/scsi@3/channel@0/disk@0,0", {10000, 120, 30} },
+ {"/pci@i0cf8/scsi@3/channel@0/disk@1,0", {9000, 120, 30} },
+ {"/pci@i0cf8/scsi@4/channel@0/disk@0,1", {1, 0, 0} },
+ {"/pci@i0cf8/scsi@4/channel@0/disk@1,2", {0, 1, 0} },
+ {NULL, {0, 0, 0} }
+ };
+ add_drive_with_mbr(args, empty_mbr, 1);
+ add_drive_with_mbr(args, empty_mbr, 1);
+ add_drive_with_mbr(args, empty_mbr, 1);
+ add_drive_with_mbr(args, empty_mbr, 1);
+ add_scsi_controller(args, "lsi53c895a", "pci.0", 3);
+ add_scsi_controller(args, "virtio-scsi-pci", "pci.0", 4);
+ add_scsi_disk(args, 0, 0, 0, 0, 0, 10000, 120, 30);
+ add_scsi_disk(args, 1, 0, 0, 1, 0, 9000, 120, 30);
+ add_scsi_disk(args, 2, 1, 0, 0, 1, 1, 0, 0);
+ add_scsi_disk(args, 3, 1, 0, 1, 2, 0, 1, 0);
+ test_override(args, expected);
+}
+
+static void test_override_virtio_blk(void)
+{
+ TestArgs *args = create_args();
+ CHSResult expected[] = {
+ {"/pci@i0cf8/scsi@3/disk@0,0", {10000, 120, 30} },
+ {"/pci@i0cf8/scsi@4/disk@0,0", {9000, 120, 30} },
+ {NULL, {0, 0, 0} }
+ };
+ add_drive_with_mbr(args, empty_mbr, 1);
+ add_drive_with_mbr(args, empty_mbr, 1);
+ add_virtio_disk(args, 0, "pci.0", 3, 10000, 120, 30);
+ add_virtio_disk(args, 1, "pci.0", 4, 9000, 120, 30);
+ test_override(args, expected);
+}
+
+static void test_override_zero_chs(void)
+{
+ TestArgs *args = create_args();
+ CHSResult expected[] = {
+ {NULL, {0, 0, 0} }
+ };
+ add_drive_with_mbr(args, empty_mbr, 1);
+ add_ide_disk(args, 0, 1, 1, 0, 0, 0);
+ test_override(args, expected);
+}
+
+static void test_override_scsi_hot_unplug(void)
+{
+ char *joined_args;
+ QFWCFG *fw_cfg;
+ QDict *response;
+ int i;
+ TestArgs *args = create_args();
+ CHSResult expected[] = {
+ {"/pci@i0cf8/scsi@2/channel@0/disk@0,0", {10000, 120, 30} },
+ {"/pci@i0cf8/scsi@2/channel@0/disk@1,0", {20, 20, 20} },
+ {NULL, {0, 0, 0} }
+ };
+ CHSResult expected2[] = {
+ {"/pci@i0cf8/scsi@2/channel@0/disk@1,0", {20, 20, 20} },
+ {NULL, {0, 0, 0} }
+ };
+ add_drive_with_mbr(args, empty_mbr, 1);
+ add_drive_with_mbr(args, empty_mbr, 1);
+ add_scsi_controller(args, "virtio-scsi-pci", "pci.0", 2);
+ add_scsi_disk(args, 0, 0, 0, 0, 0, 10000, 120, 30);
+ add_scsi_disk(args, 1, 0, 0, 1, 0, 20, 20, 20);
+
+ joined_args = g_strjoinv(" ", args->argv);
+
+ qtest_start(joined_args);
+ fw_cfg = pc_fw_cfg_init(global_qtest);
+
+ read_bootdevices(fw_cfg, expected);
+
+ /* unplug device an restart */
+ response = qmp("{ 'execute': 'device_del',"
+ " 'arguments': {'id': 'scsi-disk0' }}");
+ g_assert(response);
+ g_assert(!qdict_haskey(response, "error"));
+ qobject_unref(response);
+ response = qmp("{ 'execute': 'system_reset', 'arguments': { }}");
+ g_assert(response);
+ g_assert(!qdict_haskey(response, "error"));
+ qobject_unref(response);
+
+ qtest_qmp_eventwait(global_qtest, "RESET");
+
+ read_bootdevices(fw_cfg, expected2);
+
+ g_free(joined_args);
+ qtest_end();
+
+ g_free(fw_cfg);
+
+ for (i = 0; i < args->n_drives; i++) {
+ unlink(args->drives[i]);
+ free(args->drives[i]);
+ }
+ g_free(args->drives);
+ g_strfreev(args->argv);
+ g_free(args);
+}
+
+static void test_override_virtio_hot_unplug(void)
+{
+ char *joined_args;
+ QFWCFG *fw_cfg;
+ QDict *response;
+ int i;
+ TestArgs *args = create_args();
+ CHSResult expected[] = {
+ {"/pci@i0cf8/scsi@2/disk@0,0", {10000, 120, 30} },
+ {"/pci@i0cf8/scsi@3/disk@0,0", {20, 20, 20} },
+ {NULL, {0, 0, 0} }
+ };
+ CHSResult expected2[] = {
+ {"/pci@i0cf8/scsi@3/disk@0,0", {20, 20, 20} },
+ {NULL, {0, 0, 0} }
+ };
+ add_drive_with_mbr(args, empty_mbr, 1);
+ add_drive_with_mbr(args, empty_mbr, 1);
+ add_virtio_disk(args, 0, "pci.0", 2, 10000, 120, 30);
+ add_virtio_disk(args, 1, "pci.0", 3, 20, 20, 20);
+
+ joined_args = g_strjoinv(" ", args->argv);
+
+ qtest_start(joined_args);
+ fw_cfg = pc_fw_cfg_init(global_qtest);
+
+ read_bootdevices(fw_cfg, expected);
+
+ /* unplug device an restart */
+ response = qmp("{ 'execute': 'device_del',"
+ " 'arguments': {'id': 'virtio-disk0' }}");
+ g_assert(response);
+ g_assert(!qdict_haskey(response, "error"));
+ qobject_unref(response);
+ response = qmp("{ 'execute': 'system_reset', 'arguments': { }}");
+ g_assert(response);
+ g_assert(!qdict_haskey(response, "error"));
+ qobject_unref(response);
+
+ qtest_qmp_eventwait(global_qtest, "RESET");
+
+ read_bootdevices(fw_cfg, expected2);
+
+ g_free(joined_args);
+ qtest_end();
+
+ g_free(fw_cfg);
+
+ for (i = 0; i < args->n_drives; i++) {
+ unlink(args->drives[i]);
+ free(args->drives[i]);
+ }
+ g_free(args->drives);
+ g_strfreev(args->argv);
+ g_free(args);
+}
+
int main(int argc, char **argv)
{
Backend i;
@@ -413,6 +964,21 @@ int main(int argc, char **argv)
qtest_add_func("hd-geo/ide/device/mbr/chs", test_ide_device_mbr_chs);
qtest_add_func("hd-geo/ide/device/user/chs", test_ide_device_user_chs);
qtest_add_func("hd-geo/ide/device/user/chst", test_ide_device_user_chst);
+ if (have_qemu_img()) {
+ qtest_add_func("hd-geo/override/ide", test_override_ide);
+ qtest_add_func("hd-geo/override/scsi", test_override_scsi);
+ qtest_add_func("hd-geo/override/scsi_2_controllers",
+ test_override_scsi_2_controllers);
+ qtest_add_func("hd-geo/override/virtio_blk", test_override_virtio_blk);
+ qtest_add_func("hd-geo/override/zero_chs", test_override_zero_chs);
+ qtest_add_func("hd-geo/override/scsi_hot_unplug",
+ test_override_scsi_hot_unplug);
+ qtest_add_func("hd-geo/override/virtio_hot_unplug",
+ test_override_virtio_hot_unplug);
+ } else {
+ g_test_message("QTEST_QEMU_IMG not set or qemu-img missing; "
+ "skipping hd-geo/override/* tests");
+ }
ret = g_test_run();
--
2.13.3
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [Qemu-devel] [SeaBIOS] [QEMU] [PATCH v3 0/8] Add Qemu to SeaBIOS LCHS interface
2019-06-17 15:09 [Qemu-devel] [QEMU] [PATCH v3 0/8] Add Qemu to SeaBIOS LCHS interface Sam Eiderman
` (7 preceding siblings ...)
2019-06-17 15:09 ` [Qemu-devel] [QEMU] [PATCH v3 8/8] hd-geo-test: Add tests for lchs override Sam Eiderman
@ 2019-06-17 16:31 ` no-reply
2019-06-17 16:45 ` no-reply
9 siblings, 0 replies; 11+ messages in thread
From: no-reply @ 2019-06-17 16:31 UTC (permalink / raw)
To: shmuel.eiderman
Cc: kwolf, qemu-block, arbel.moshe, seabios, qemu-devel, mreitz,
kevin, kraxel, karl.heubaum
Patchew URL: https://patchew.org/QEMU/20190617150950.5264-1-shmuel.eiderman@oracle.com/
Hi,
This series failed the asan build test. Please find the testing commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.
=== TEST SCRIPT BEGIN ===
#!/bin/bash
make docker-image-fedora V=1 NETWORK=1
time make docker-test-debug@fedora TARGET_LIST=x86_64-softmmu J=14 NETWORK=1
=== TEST SCRIPT END ===
PASS 1 fdc-test /x86_64/fdc/cmos
PASS 2 fdc-test /x86_64/fdc/no_media_on_start
PASS 3 fdc-test /x86_64/fdc/read_without_media
==9151==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 4 fdc-test /x86_64/fdc/media_change
PASS 5 fdc-test /x86_64/fdc/sense_interrupt
PASS 6 fdc-test /x86_64/fdc/relative_seek
---
PASS 32 test-opts-visitor /visitor/opts/range/beyond
PASS 33 test-opts-visitor /visitor/opts/dict/unvisited
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-coroutine -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-coroutine"
==9204==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==9204==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffd217df000; bottom 0x7f9ec58f8000; size: 0x005e5bee7000 (405269278720)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 1 test-coroutine /basic/no-dangling-access
---
PASS 11 test-aio /aio/event/wait
PASS 12 test-aio /aio/event/flush
PASS 13 test-aio /aio/event/wait/no-flush-cb
==9221==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 14 test-aio /aio/timer/schedule
PASS 15 test-aio /aio/coroutine/queue-chaining
PASS 16 test-aio /aio-gsource/flush
---
PASS 28 test-aio /aio-gsource/timer/schedule
PASS 13 fdc-test /x86_64/fdc/fuzz-registers
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-aio-multithread -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-aio-multithread"
==9228==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-aio-multithread /aio/multi/lifecycle
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 QTEST_QEMU_IMG=qemu-img tests/ide-test -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="ide-test"
PASS 2 test-aio-multithread /aio/multi/schedule
==9245==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 ide-test /x86_64/ide/identify
PASS 3 test-aio-multithread /aio/multi/mutex/contended
==9256==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 2 ide-test /x86_64/ide/flush
==9267==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 3 ide-test /x86_64/ide/bmdma/simple_rw
==9273==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 4 test-aio-multithread /aio/multi/mutex/handoff
PASS 4 ide-test /x86_64/ide/bmdma/trim
==9284==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 5 test-aio-multithread /aio/multi/mutex/mcs
PASS 5 ide-test /x86_64/ide/bmdma/short_prdt
==9295==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 6 test-aio-multithread /aio/multi/mutex/pthread
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-throttle -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-throttle"
PASS 6 ide-test /x86_64/ide/bmdma/one_sector_short_prdt
---
PASS 6 test-throttle /throttle/detach_attach
PASS 7 test-throttle /throttle/config_functions
PASS 8 test-throttle /throttle/accounting
==9303==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 9 test-throttle /throttle/groups
PASS 10 test-throttle /throttle/config/enabled
PASS 11 test-throttle /throttle/config/conflicting
---
PASS 14 test-throttle /throttle/config/max
PASS 15 test-throttle /throttle/config/iops_size
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-thread-pool -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-thread-pool"
==9309==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-thread-pool /thread-pool/submit
PASS 2 test-thread-pool /thread-pool/submit-aio
PASS 3 test-thread-pool /thread-pool/submit-co
PASS 4 test-thread-pool /thread-pool/submit-many
==9305==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 7 ide-test /x86_64/ide/bmdma/long_prdt
==9366==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==9366==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffdf0dff000; bottom 0x7ff6c41fe000; size: 0x00072cc01000 (30815555584)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 8 ide-test /x86_64/ide/bmdma/no_busmaster
PASS 5 test-thread-pool /thread-pool/cancel
PASS 9 ide-test /x86_64/ide/flush/nodev
==9392==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 6 test-thread-pool /thread-pool/cancel-async
PASS 10 ide-test /x86_64/ide/flush/empty_drive
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-hbitmap -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-hbitmap"
---
PASS 2 test-hbitmap /hbitmap/size/0
PASS 3 test-hbitmap /hbitmap/size/unaligned
PASS 4 test-hbitmap /hbitmap/iter/empty
==9398==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 5 test-hbitmap /hbitmap/iter/partial
PASS 6 test-hbitmap /hbitmap/iter/granularity
PASS 7 test-hbitmap /hbitmap/iter/iter_and_reset
---
PASS 11 ide-test /x86_64/ide/flush/retry_pci
PASS 15 test-hbitmap /hbitmap/set/overlap
PASS 16 test-hbitmap /hbitmap/reset/empty
==9408==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 17 test-hbitmap /hbitmap/reset/general
PASS 18 test-hbitmap /hbitmap/reset/all
PASS 19 test-hbitmap /hbitmap/truncate/nop
---
PASS 29 test-hbitmap /hbitmap/truncate/shrink/large
PASS 30 test-hbitmap /hbitmap/meta/zero
PASS 12 ide-test /x86_64/ide/flush/retry_isa
==9415==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 13 ide-test /x86_64/ide/cdrom/pio
==9421==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 14 ide-test /x86_64/ide/cdrom/pio_large
==9427==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 15 ide-test /x86_64/ide/cdrom/dma
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 QTEST_QEMU_IMG=qemu-img tests/ahci-test -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="ahci-test"
PASS 31 test-hbitmap /hbitmap/meta/one
PASS 32 test-hbitmap /hbitmap/meta/byte
PASS 33 test-hbitmap /hbitmap/meta/word
==9441==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 34 test-hbitmap /hbitmap/meta/sector
PASS 35 test-hbitmap /hbitmap/serialize/align
PASS 1 ahci-test /x86_64/ahci/sanity
==9447==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 2 ahci-test /x86_64/ahci/pci_spec
PASS 36 test-hbitmap /hbitmap/serialize/basic
PASS 37 test-hbitmap /hbitmap/serialize/part
---
PASS 40 test-hbitmap /hbitmap/next_zero/next_zero_4
PASS 41 test-hbitmap /hbitmap/next_dirty_area/next_dirty_area_0
PASS 42 test-hbitmap /hbitmap/next_dirty_area/next_dirty_area_1
==9453==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 43 test-hbitmap /hbitmap/next_dirty_area/next_dirty_area_4
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-bdrv-drain -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-bdrv-drain"
==9460==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-bdrv-drain /bdrv-drain/nested
PASS 2 test-bdrv-drain /bdrv-drain/multiparent
PASS 3 test-bdrv-drain /bdrv-drain/set_aio_context
---
PASS 37 test-bdrv-drain /bdrv-drain/detach/parent_cb
PASS 38 test-bdrv-drain /bdrv-drain/detach/driver_cb
PASS 39 test-bdrv-drain /bdrv-drain/attach/drain
==9481==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-bdrv-graph-mod -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-bdrv-graph-mod"
==9506==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-bdrv-graph-mod /bdrv-graph-mod/update-perm-tree
PASS 2 test-bdrv-graph-mod /bdrv-graph-mod/should-update-child
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-blockjob -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-blockjob"
PASS 4 ahci-test /x86_64/ahci/hba_spec
==9512==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-blockjob /blockjob/ids
PASS 2 test-blockjob /blockjob/cancel/created
PASS 3 test-blockjob /blockjob/cancel/running
---
PASS 7 test-blockjob /blockjob/cancel/pending
PASS 8 test-blockjob /blockjob/cancel/concluded
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-blockjob-txn -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-blockjob-txn"
==9514==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==9518==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-blockjob-txn /single/success
PASS 2 test-blockjob-txn /single/failure
PASS 3 test-blockjob-txn /single/cancel
---
PASS 7 test-blockjob-txn /pair/fail-cancel-race
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-block-backend -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-block-backend"
PASS 5 ahci-test /x86_64/ahci/hba_enable
==9528==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-block-backend /block-backend/drain_aio_error
PASS 2 test-block-backend /block-backend/drain_all_aio_error
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-block-iothread -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-block-iothread"
==9534==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-block-iothread /sync-op/pread
PASS 2 test-block-iothread /sync-op/pwrite
PASS 3 test-block-iothread /sync-op/load_vmstate
---
PASS 14 test-block-iothread /propagate/basic
PASS 15 test-block-iothread /propagate/diamond
PASS 16 test-block-iothread /propagate/mirror
==9530==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-image-locking -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-image-locking"
==9559==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-image-locking /image-locking/basic
PASS 2 test-image-locking /image-locking/set-perm-abort
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-x86-cpuid -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-x86-cpuid"
---
PASS 3 test-xbzrle /xbzrle/encode_decode_unchanged
PASS 4 test-xbzrle /xbzrle/encode_decode_1_byte
PASS 5 test-xbzrle /xbzrle/encode_decode_overflow
==9568==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 6 test-xbzrle /xbzrle/encode_decode
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-vmstate -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-vmstate"
PASS 7 ahci-test /x86_64/ahci/max
---
PASS 133 test-cutils /cutils/strtosz/erange
PASS 134 test-cutils /cutils/strtosz/metric
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-shift128 -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-shift128"
==9583==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-shift128 /host-utils/test_lshift
PASS 2 test-shift128 /host-utils/test_rshift
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-mul64 -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-mul64"
---
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/rcutorture -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="rcutorture"
PASS 8 ahci-test /x86_64/ahci/reset
PASS 1 rcutorture /rcu/torture/1reader
==9616==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==9616==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7fff29cf0000; bottom 0x7f6ef81fe000; size: 0x009031af2000 (619308851200)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 9 ahci-test /x86_64/ahci/io/pio/lba28/simple/zero
PASS 2 rcutorture /rcu/torture/10readers
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-rcu-list -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-rcu-list"
==9638==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==9638==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffdb26ca000; bottom 0x7fa769ffe000; size: 0x0056486cc000 (370582274048)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 10 ahci-test /x86_64/ahci/io/pio/lba28/simple/low
PASS 1 test-rcu-list /rcu/qlist/single-threaded
==9651==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==9651==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffecbae8000; bottom 0x7f2cd15fe000; size: 0x00d1fa4ea000 (901847621632)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 2 test-rcu-list /rcu/qlist/short-few
PASS 11 ahci-test /x86_64/ahci/io/pio/lba28/simple/high
==9684==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==9684==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffcdabe1000; bottom 0x7fa7fc3fe000; size: 0x0054de7e3000 (364510064640)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 12 ahci-test /x86_64/ahci/io/pio/lba28/double/zero
==9690==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==9690==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffc9d4ba000; bottom 0x7f95075fe000; size: 0x006795ebc000 (444896886784)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 3 test-rcu-list /rcu/qlist/long-many
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-rcu-simpleq -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-rcu-simpleq"
PASS 13 ahci-test /x86_64/ahci/io/pio/lba28/double/low
==9701==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==9701==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffee8a10000; bottom 0x7f346f5fe000; size: 0x00ca79412000 (869617704960)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 1 test-rcu-simpleq /rcu/qsimpleq/single-threaded
PASS 14 ahci-test /x86_64/ahci/io/pio/lba28/double/high
==9715==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==9715==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7fffa6e2d000; bottom 0x7f03065fe000; size: 0x00fca082f000 (1085024694272)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 2 test-rcu-simpleq /rcu/qsimpleq/short-few
PASS 15 ahci-test /x86_64/ahci/io/pio/lba28/long/zero
==9742==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==9742==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffea686a000; bottom 0x7f25fc5fe000; size: 0x00d8aa26c000 (930567602176)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 3 test-rcu-simpleq /rcu/qsimpleq/long-many
PASS 16 ahci-test /x86_64/ahci/io/pio/lba28/long/low
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-rcu-tailq -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-rcu-tailq"
==9749==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==9749==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffd75317000; bottom 0x7f375a77c000; size: 0x00c61ab9b000 (850851901440)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 1 test-rcu-tailq /rcu/qtailq/single-threaded
PASS 17 ahci-test /x86_64/ahci/io/pio/lba28/long/high
==9767==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 2 test-rcu-tailq /rcu/qtailq/short-few
PASS 18 ahci-test /x86_64/ahci/io/pio/lba28/short/zero
==9794==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 19 ahci-test /x86_64/ahci/io/pio/lba28/short/low
PASS 3 test-rcu-tailq /rcu/qtailq/long-many
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-qdist -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-qdist"
==9800==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-qdist /qdist/none
PASS 2 test-qdist /qdist/pr
PASS 3 test-qdist /qdist/single/empty
---
PASS 8 test-qdist /qdist/binning/shrink
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-qht -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-qht"
PASS 20 ahci-test /x86_64/ahci/io/pio/lba28/short/high
==9815==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==9815==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffec477b000; bottom 0x7f051b7fe000; size: 0x00f9a8f7d000 (1072281669632)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 21 ahci-test /x86_64/ahci/io/pio/lba48/simple/zero
==9821==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==9821==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffef6123000; bottom 0x7f89945fe000; size: 0x007561b25000 (504150249472)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 22 ahci-test /x86_64/ahci/io/pio/lba48/simple/low
==9827==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==9827==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7fff11e69000; bottom 0x7f49a2bfe000; size: 0x00b56f26b000 (779253886976)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 23 ahci-test /x86_64/ahci/io/pio/lba48/simple/high
==9833==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==9833==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffd75931000; bottom 0x7efe7cbfe000; size: 0x00fef8d33000 (1095096283136)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 24 ahci-test /x86_64/ahci/io/pio/lba48/double/zero
==9839==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==9839==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffd488de000; bottom 0x7f2a215fe000; size: 0x00d3272e0000 (906895425536)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 25 ahci-test /x86_64/ahci/io/pio/lba48/double/low
==9845==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==9845==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffe4cfd0000; bottom 0x7f7bcb7fe000; size: 0x0082817d2000 (560518209536)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 26 ahci-test /x86_64/ahci/io/pio/lba48/double/high
==9851==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==9851==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7fffdb69e000; bottom 0x7f5722124000; size: 0x00a8b957a000 (724664033280)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 27 ahci-test /x86_64/ahci/io/pio/lba48/long/zero
==9857==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==9857==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffcd407f000; bottom 0x7f3e971fe000; size: 0x00be3ce81000 (817065627648)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 28 ahci-test /x86_64/ahci/io/pio/lba48/long/low
==9863==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==9863==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffdd76fb000; bottom 0x7f86f87fe000; size: 0x0076deefd000 (510546399232)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 29 ahci-test /x86_64/ahci/io/pio/lba48/long/high
==9869==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 30 ahci-test /x86_64/ahci/io/pio/lba48/short/zero
==9875==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 31 ahci-test /x86_64/ahci/io/pio/lba48/short/low
PASS 1 test-qht /qht/mode/default
==9881==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 2 test-qht /qht/mode/resize
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-qht-par -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-qht-par"
PASS 32 ahci-test /x86_64/ahci/io/pio/lba48/short/high
==9897==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-qht-par /qht/parallel/2threads-0%updates-1s
PASS 33 ahci-test /x86_64/ahci/io/dma/lba28/fragmented
==9910==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 2 test-qht-par /qht/parallel/2threads-20%updates-1s
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-bitops -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-bitops"
PASS 1 test-bitops /bitops/sextract32
---
PASS 3 test-bitcnt /bitcnt/ctpop32
PASS 4 test-bitcnt /bitcnt/ctpop64
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-qdev-global-props -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-qdev-global-props"
==9925==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-qdev-global-props /qdev/properties/static/default
PASS 2 test-qdev-global-props /qdev/properties/static/global
PASS 3 test-qdev-global-props /qdev/properties/dynamic/global
---
PASS 18 test-qemu-opts /qemu-opts/to_qdict/filtered
PASS 19 test-qemu-opts /qemu-opts/to_qdict/duplicates
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-keyval -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-keyval"
==9951==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-keyval /keyval/keyval_parse
PASS 2 test-keyval /keyval/keyval_parse/list
PASS 3 test-keyval /keyval/visit/bool
---
PASS 4 test-crypto-hash /crypto/hash/digest
PASS 5 test-crypto-hash /crypto/hash/base64
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-crypto-hmac -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-crypto-hmac"
==9973==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-crypto-hmac /crypto/hmac/iov
PASS 2 test-crypto-hmac /crypto/hmac/alloc
PASS 3 test-crypto-hmac /crypto/hmac/prealloc
---
PASS 16 test-crypto-secret /crypto/secret/crypt/badiv
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-crypto-tlscredsx509 -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-crypto-tlscredsx509"
PASS 37 ahci-test /x86_64/ahci/io/dma/lba28/simple/high
==10000==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/perfectserver
PASS 2 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/perfectclient
PASS 38 ahci-test /x86_64/ahci/io/dma/lba28/double/zero
PASS 3 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/goodca1
PASS 4 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/goodca2
==10006==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 39 ahci-test /x86_64/ahci/io/dma/lba28/double/low
PASS 5 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/goodca3
PASS 6 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/badca1
PASS 7 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/badca2
PASS 8 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/badca3
==10012==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 9 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/goodserver1
PASS 10 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/goodserver2
PASS 11 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/goodserver3
PASS 40 ahci-test /x86_64/ahci/io/dma/lba28/double/high
==10018==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 12 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/goodserver4
PASS 41 ahci-test /x86_64/ahci/io/dma/lba28/long/zero
==10024==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 13 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/goodserver5
PASS 42 ahci-test /x86_64/ahci/io/dma/lba28/long/low
PASS 14 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/goodserver6
==10030==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 15 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/goodserver7
PASS 16 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/badserver1
PASS 17 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/badserver2
---
PASS 38 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/missingserver
PASS 39 test-crypto-tlscredsx509 /qcrypto/tlscredsx509/missingclient
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-crypto-tlssession -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-crypto-tlssession"
==10036==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 44 ahci-test /x86_64/ahci/io/dma/lba28/short/zero
==10047==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 45 ahci-test /x86_64/ahci/io/dma/lba28/short/low
==10053==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-crypto-tlssession /qcrypto/tlssession/psk
PASS 2 test-crypto-tlssession /qcrypto/tlssession/basicca
PASS 46 ahci-test /x86_64/ahci/io/dma/lba28/short/high
==10059==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 3 test-crypto-tlssession /qcrypto/tlssession/differentca
PASS 47 ahci-test /x86_64/ahci/io/dma/lba48/simple/zero
==10065==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 4 test-crypto-tlssession /qcrypto/tlssession/altname1
PASS 48 ahci-test /x86_64/ahci/io/dma/lba48/simple/low
PASS 5 test-crypto-tlssession /qcrypto/tlssession/altname2
PASS 6 test-crypto-tlssession /qcrypto/tlssession/altname3
==10071==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 7 test-crypto-tlssession /qcrypto/tlssession/altname4
PASS 8 test-crypto-tlssession /qcrypto/tlssession/altname5
PASS 49 ahci-test /x86_64/ahci/io/dma/lba48/simple/high
PASS 9 test-crypto-tlssession /qcrypto/tlssession/altname6
PASS 10 test-crypto-tlssession /qcrypto/tlssession/wildcard1
==10077==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 50 ahci-test /x86_64/ahci/io/dma/lba48/double/zero
==10083==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 51 ahci-test /x86_64/ahci/io/dma/lba48/double/low
==10089==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 52 ahci-test /x86_64/ahci/io/dma/lba48/double/high
PASS 11 test-crypto-tlssession /qcrypto/tlssession/wildcard2
==10095==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 12 test-crypto-tlssession /qcrypto/tlssession/wildcard3
PASS 13 test-crypto-tlssession /qcrypto/tlssession/wildcard4
PASS 53 ahci-test /x86_64/ahci/io/dma/lba48/long/zero
==10101==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 54 ahci-test /x86_64/ahci/io/dma/lba48/long/low
PASS 14 test-crypto-tlssession /qcrypto/tlssession/wildcard5
PASS 15 test-crypto-tlssession /qcrypto/tlssession/wildcard6
==10107==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 16 test-crypto-tlssession /qcrypto/tlssession/cachain
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-qga -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-qga"
PASS 55 ahci-test /x86_64/ahci/io/dma/lba48/long/high
---
PASS 15 test-qga /qga/invalid-cmd
PASS 16 test-qga /qga/invalid-args
PASS 17 test-qga /qga/fsfreeze-status
==10119==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 56 ahci-test /x86_64/ahci/io/dma/lba48/short/zero
PASS 18 test-qga /qga/blacklist
PASS 19 test-qga /qga/config
PASS 20 test-qga /qga/guest-exec
PASS 21 test-qga /qga/guest-exec-invalid
==10126==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 57 ahci-test /x86_64/ahci/io/dma/lba48/short/low
==10139==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 22 test-qga /qga/guest-get-osinfo
PASS 23 test-qga /qga/guest-get-host-name
PASS 24 test-qga /qga/guest-get-timezone
---
PASS 4 test-io-task /crypto/task/thread_complete
PASS 5 test-io-task /crypto/task/thread_failure
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-io-channel-socket -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-io-channel-socket"
==10163==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-io-channel-socket /io/channel/socket/ipv4-sync
PASS 2 test-io-channel-socket /io/channel/socket/ipv4-async
PASS 3 test-io-channel-socket /io/channel/socket/ipv4-fd
---
PASS 5 test-io-channel-file /io/channel/pipe/async
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-io-channel-tls -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-io-channel-tls"
PASS 59 ahci-test /x86_64/ahci/io/ncq/simple
==10246==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-io-channel-tls /qio/channel/tls/basic
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-io-channel-command -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-io-channel-command"
PASS 1 test-io-channel-command /io/channel/command/fifo/sync
---
PASS 17 test-crypto-pbkdf /crypto/pbkdf/nonrfc/sha384/iter1200
PASS 18 test-crypto-pbkdf /crypto/pbkdf/nonrfc/ripemd160/iter1200
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-crypto-ivgen -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-crypto-ivgen"
==10267==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-crypto-ivgen /crypto/ivgen/plain/1
PASS 2 test-crypto-ivgen /crypto/ivgen/plain/1f2e3d4c
PASS 3 test-crypto-ivgen /crypto/ivgen/plain/1f2e3d4c5b6a7988
---
PASS 1 test-logging /logging/parse_range
PASS 2 test-logging /logging/parse_path
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-replication -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-replication"
==10297==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==10308==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-replication /replication/primary/read
PASS 2 test-replication /replication/primary/write
PASS 62 ahci-test /x86_64/ahci/flush/retry
---
PASS 4 test-replication /replication/primary/stop
PASS 5 test-replication /replication/primary/do_checkpoint
PASS 6 test-replication /replication/primary/get_error_all
==10317==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 7 test-replication /replication/secondary/read
==10322==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 8 test-replication /replication/secondary/write
PASS 63 ahci-test /x86_64/ahci/flush/migrate
==10308==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffe7b9a3000; bottom 0x7f469bafc000; size: 0x00b7dfea7000 (789735698432)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
==10331==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 9 test-replication /replication/secondary/start
==10352==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 64 ahci-test /x86_64/ahci/migrate/sanity
PASS 10 test-replication /replication/secondary/stop
==10361==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==10366==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 11 test-replication /replication/secondary/do_checkpoint
PASS 12 test-replication /replication/secondary/get_error_all
PASS 65 ahci-test /x86_64/ahci/migrate/dma/simple
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-bufferiszero -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-bufferiszero"
==10376==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==10384==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 66 ahci-test /x86_64/ahci/migrate/dma/halted
==10393==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==10399==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 67 ahci-test /x86_64/ahci/migrate/ncq/simple
==10408==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==10413==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 68 ahci-test /x86_64/ahci/migrate/ncq/halted
==10422==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 69 ahci-test /x86_64/ahci/cdrom/eject
==10427==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 70 ahci-test /x86_64/ahci/cdrom/dma/single
==10433==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 71 ahci-test /x86_64/ahci/cdrom/dma/multi
==10439==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 72 ahci-test /x86_64/ahci/cdrom/pio/single
==10445==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==10445==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffe71ecc000; bottom 0x7f4b399fe000; size: 0x00b3384ce000 (769743708160)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 73 ahci-test /x86_64/ahci/cdrom/pio/multi
==10451==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 74 ahci-test /x86_64/ahci/cdrom/pio/bcl
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 QTEST_QEMU_IMG=qemu-img tests/hd-geo-test -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="hd-geo-test"
PASS 1 hd-geo-test /x86_64/hd-geo/ide/none
==10465==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 2 hd-geo-test /x86_64/hd-geo/ide/drive/cd_0
==10471==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 3 hd-geo-test /x86_64/hd-geo/ide/drive/mbr/blank
==10477==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 4 hd-geo-test /x86_64/hd-geo/ide/drive/mbr/lba
==10483==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 5 hd-geo-test /x86_64/hd-geo/ide/drive/mbr/chs
==10489==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 6 hd-geo-test /x86_64/hd-geo/ide/device/mbr/blank
==10495==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 7 hd-geo-test /x86_64/hd-geo/ide/device/mbr/lba
==10501==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 8 hd-geo-test /x86_64/hd-geo/ide/device/mbr/chs
==10507==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 9 hd-geo-test /x86_64/hd-geo/ide/device/user/chs
==10512==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 10 hd-geo-test /x86_64/hd-geo/ide/device/user/chst
sh: qemu-img: command not found
**
ERROR:/tmp/qemu-test/src/tests/hd-geo-test.c:478:create_qcow2_with_mbr: assertion failed: (ret == 0)
ERROR - Bail out! ERROR:/tmp/qemu-test/src/tests/hd-geo-test.c:478:create_qcow2_with_mbr: assertion failed: (ret == 0)
make: *** [/tmp/qemu-test/src/tests/Makefile.include:894: check-qtest-x86_64] Error 1
make: *** Waiting for unfinished jobs....
PASS 1 test-bufferiszero /cutils/bufferiszero
The full log is available at
http://patchew.org/logs/20190617150950.5264-1-shmuel.eiderman@oracle.com/testing.asan/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to patchew-devel@redhat.com
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Qemu-devel] [SeaBIOS] [QEMU] [PATCH v3 0/8] Add Qemu to SeaBIOS LCHS interface
2019-06-17 15:09 [Qemu-devel] [QEMU] [PATCH v3 0/8] Add Qemu to SeaBIOS LCHS interface Sam Eiderman
` (8 preceding siblings ...)
2019-06-17 16:31 ` [Qemu-devel] [SeaBIOS] [QEMU] [PATCH v3 0/8] Add Qemu to SeaBIOS LCHS interface no-reply
@ 2019-06-17 16:45 ` no-reply
9 siblings, 0 replies; 11+ messages in thread
From: no-reply @ 2019-06-17 16:45 UTC (permalink / raw)
To: shmuel.eiderman
Cc: kwolf, qemu-block, arbel.moshe, seabios, qemu-devel, mreitz,
kevin, kraxel, karl.heubaum
Patchew URL: https://patchew.org/QEMU/20190617150950.5264-1-shmuel.eiderman@oracle.com/
Hi,
This series seems to have some coding style problems. See output below for
more information:
Message-id: 20190617150950.5264-1-shmuel.eiderman@oracle.com
Type: series
Subject: [SeaBIOS] [QEMU] [PATCH v3 0/8] Add Qemu to SeaBIOS LCHS interface
=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===
From https://github.com/patchew-project/qemu
5d0e569..076243f master -> master
From https://github.com/patchew-project/qemu
* [new tag] patchew/20190617150950.5264-1-shmuel.eiderman@oracle.com -> patchew/20190617150950.5264-1-shmuel.eiderman@oracle.com
Switched to a new branch 'test'
fd108cd hd-geo-test: Add tests for lchs override
48924b4 bootdevice: FW_CFG interface for LCHS values
a5d9c05 bootdevice: Refactor get_boot_devices_list
4bbd8b3 bootdevice: Gather LCHS from all relevant devices
0c1a116 scsi: Propagate unrealize() callback to scsi-hd
e67cc65 bootdevice: Add interface to gather LCHS
4ee45e1 block: Support providing LCHS from user
20c9570 block: Refactor macros - fix tabbing
=== OUTPUT BEGIN ===
1/8 Checking commit 20c9570c533d (block: Refactor macros - fix tabbing)
ERROR: Macros with complex values should be enclosed in parenthesis
#55: FILE: include/hw/block/block.h:65:
+#define DEFINE_BLOCK_CHS_PROPERTIES(_state, _conf) \
+ DEFINE_PROP_UINT32("cyls", _state, _conf.cyls, 0), \
+ DEFINE_PROP_UINT32("heads", _state, _conf.heads, 0), \
DEFINE_PROP_UINT32("secs", _state, _conf.secs, 0)
total: 1 errors, 0 warnings, 37 lines checked
Patch 1/8 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
2/8 Checking commit 4ee45e1aba23 (block: Support providing LCHS from user)
3/8 Checking commit e67cc65e5e42 (bootdevice: Add interface to gather LCHS)
4/8 Checking commit 0c1a116c12b8 (scsi: Propagate unrealize() callback to scsi-hd)
5/8 Checking commit 4bbd8b3f99c7 (bootdevice: Gather LCHS from all relevant devices)
6/8 Checking commit a5d9c05dfa78 (bootdevice: Refactor get_boot_devices_list)
7/8 Checking commit 48924b42fc79 (bootdevice: FW_CFG interface for LCHS values)
8/8 Checking commit fd108cda4981 (hd-geo-test: Add tests for lchs override)
WARNING: Block comments use a leading /* on a separate line
#625: FILE: tests/hd-geo-test.c:980:
+ "skipping hd-geo/override/* tests");
total: 0 errors, 1 warnings, 593 lines checked
Patch 8/8 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
=== OUTPUT END ===
Test command exited with code: 1
The full log is available at
http://patchew.org/logs/20190617150950.5264-1-shmuel.eiderman@oracle.com/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to patchew-devel@redhat.com
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2019-06-17 17:23 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-17 15:09 [Qemu-devel] [QEMU] [PATCH v3 0/8] Add Qemu to SeaBIOS LCHS interface Sam Eiderman
2019-06-17 15:09 ` [Qemu-devel] [QEMU] [PATCH v3 1/8] block: Refactor macros - fix tabbing Sam Eiderman
2019-06-17 15:09 ` [Qemu-devel] [QEMU] [PATCH v3 2/8] block: Support providing LCHS from user Sam Eiderman
2019-06-17 15:09 ` [Qemu-devel] [QEMU] [PATCH v3 3/8] bootdevice: Add interface to gather LCHS Sam Eiderman
2019-06-17 15:09 ` [Qemu-devel] [QEMU] [PATCH v3 4/8] scsi: Propagate unrealize() callback to scsi-hd Sam Eiderman
2019-06-17 15:09 ` [Qemu-devel] [QEMU] [PATCH v3 5/8] bootdevice: Gather LCHS from all relevant devices Sam Eiderman
2019-06-17 15:09 ` [Qemu-devel] [QEMU] [PATCH v3 6/8] bootdevice: Refactor get_boot_devices_list Sam Eiderman
2019-06-17 15:09 ` [Qemu-devel] [QEMU] [PATCH v3 7/8] bootdevice: FW_CFG interface for LCHS values Sam Eiderman
2019-06-17 15:09 ` [Qemu-devel] [QEMU] [PATCH v3 8/8] hd-geo-test: Add tests for lchs override Sam Eiderman
2019-06-17 16:31 ` [Qemu-devel] [SeaBIOS] [QEMU] [PATCH v3 0/8] Add Qemu to SeaBIOS LCHS interface no-reply
2019-06-17 16:45 ` no-reply
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.