[U-Boot] [PATCH 1/1] board: Arcturus: DM: Disable drivers without DM support.

* [U-Boot] [PATCH 1/1] board: Arcturus: DM: Disable drivers without DM support.
@ 2019-06-17 20:10 Oleksandr Zhadan
  2019-06-22 16:08 ` Tom Rini
  0 siblings, 1 reply; 2+ messages in thread
From: Oleksandr Zhadan @ 2019-06-17 20:10 UTC (permalink / raw)
  To: u-boot

Extra "not DM" controllers support is disabled.
u-boot BSP still good enough to upgrade and run images.

Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com>
Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
---
 board/Arcturus/ucp1020/cmd_arc.c | 420 ++++++++++++++++++++++++++++-----------
 board/Arcturus/ucp1020/ucp1020.c |  10 +-
 board/Arcturus/ucp1020/ucp1020.h |   6 +-
 configs/UCP1020_defconfig        |  21 +-
 include/configs/UCP1020.h        |  65 +++++-
 5 files changed, 379 insertions(+), 143 deletions(-)

diff --git a/board/Arcturus/ucp1020/cmd_arc.c b/board/Arcturus/ucp1020/cmd_arc.c
index 9579d52ffd..7a510c61fb 100644
--- a/board/Arcturus/ucp1020/cmd_arc.c
+++ b/board/Arcturus/ucp1020/cmd_arc.c
@@ -2,8 +2,8 @@
 /*
  * Command for accessing Arcturus factory environment.
  *
- * Copyright 2013-2015 Arcturus Networks Inc.
- *           http://www.arcturusnetworks.com/products/ucp1020/
+ * Copyright 2013-2019 Arcturus Networks Inc.
+ *           https://www.arcturusnetworks.com/products/
  *           by Oleksandr G Zhadan et al.
  *
  */
@@ -12,19 +12,13 @@
 #include <div64.h>
 #include <malloc.h>
 #include <spi_flash.h>
-
+#include <mmc.h>
+#include <version.h>
+#include <environment.h>
 #include <asm/io.h>
 
-#define MAX_SERIAL_SIZE 15
-#define MAX_HWADDR_SIZE 17
-
-#define FIRM_ADDR1 (0x200 - sizeof(smac))
-#define FIRM_ADDR2 (0x400 - sizeof(smac))
-#define FIRM_ADDR3 (CONFIG_ENV_SECT_SIZE + 0x200 - sizeof(smac))
-#define FIRM_ADDR4 (CONFIG_ENV_SECT_SIZE + 0x400 - sizeof(smac))
-
-static struct spi_flash *flash;
-char smac[4][18];
+static ulong fwenv_addr[MAX_FWENV_ADDR];
+const char mystrerr[] = "ERROR: Failed to save factory info";
 
 static int ishwaddr(char *hwaddr)
 {
@@ -38,156 +32,349 @@ static int ishwaddr(char *hwaddr)
 	return -1;
 }
 
-static int set_arc_product(int argc, char *const argv[])
+#if (FWENV_TYPE == FWENV_MMC)
+
+static char smac[29][18] __attribute__ ((aligned(0x200)));	/* 1 MMC block is 512 bytes */
+
+int set_mmc_arc_product(int argc, char *const argv[])
 {
-	int err = 0;
-	char *mystrerr = "ERROR: Failed to save factory info in spi location";
+	struct mmc *mmc;
+	u32 blk, cnt, n;
+	int i, err = 1;
+	void *addr;
+	const u8 mmc_dev_num = CONFIG_SYS_MMC_ENV_DEV;
+
+	mmc = find_mmc_device(mmc_dev_num);
+	if (!mmc) {
+		printf("No SD/MMC/eMMC card found\n");
+		return 0;
+	}
+	if (mmc_init(mmc)) {
+		printf("%s(%d) init failed\n", IS_SD(mmc) ? "SD" : "MMC",
+		       mmc_dev_num);
+		return 0;
+	}
+	if (mmc_getwp(mmc) == 1) {
+		printf("Error: card is write protected!\n");
+		return CMD_RET_FAILURE;
+	}
 
-	if (argc != 5)
-		return -1;
+	/* Save factory defaults */
+	addr = (void *)smac;
+	cnt = 1;		/* One 512 bytes block */
+
+	for (i = 0; i < MAX_FWENV_ADDR; i++)
+		if (fwenv_addr[i] != -1) {
+			blk = fwenv_addr[i] / 512;
+			n = blk_dwrite(mmc_get_blk_desc(mmc), blk, cnt, addr);
+			if (n != cnt)
+				printf("%s: %s [%d]\n", __func__, mystrerr, i);
+			else
+				err = 0;
+		}
+	if (err)
+		return -2;
 
-	/* Check serial number */
-	if (strlen(argv[1]) != MAX_SERIAL_SIZE)
-		return -1;
+	return err;
+}
 
-	/* Check HWaddrs */
-	if (ishwaddr(argv[2]) || ishwaddr(argv[3]) || ishwaddr(argv[4]))
-		return -1;
+static int read_mmc_arc_info(void)
+{
+	struct mmc *mmc;
+	u32 blk, cnt, n;
+	int i;
+	void *addr;
+	const u8 mmc_dev_num = CONFIG_SYS_MMC_ENV_DEV;
+
+	mmc = find_mmc_device(mmc_dev_num);
+	if (!mmc) {
+		printf("No SD/MMC/eMMC card found\n");
+		return 0;
+	}
+	if (mmc_init(mmc)) {
+		printf("%s(%d) init failed\n", IS_SD(mmc) ? "SD" : "MMC",
+		       mmc_dev_num);
+		return 0;
+	}
 
-	strcpy(smac[3], argv[1]);
-	strcpy(smac[2], argv[2]);
-	strcpy(smac[1], argv[3]);
-	strcpy(smac[0], argv[4]);
+	addr = (void *)smac;
+	cnt = 1;		/* One 512 bytes block */
 
-	flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
-				CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
+	for (i = 0; i < MAX_FWENV_ADDR; i++)
+		if (fwenv_addr[i] != -1) {
+			blk = fwenv_addr[i] / 512;
+			n = blk_dread(mmc_get_blk_desc(mmc), blk, cnt, addr);
+			flush_cache((ulong) addr, 512);
+			if (n == cnt)
+				return (i + 1);
+		}
+	return 0;
+}
+#endif
 
-	/*
-	 * Save factory defaults
-	 */
+#if (FWENV_TYPE == FWENV_SPI_FLASH)
 
-	if (spi_flash_write(flash, FIRM_ADDR1, sizeof(smac), smac)) {
-		printf("%s: %s [1]\n", __func__, mystrerr);
-		err++;
-	}
-	if (spi_flash_write(flash, FIRM_ADDR2, sizeof(smac), smac)) {
-		printf("%s: %s [2]\n", __func__, mystrerr);
-		err++;
-	}
+static struct spi_flash *flash;
+static char smac[4][18];
 
-	if (spi_flash_write(flash, FIRM_ADDR3, sizeof(smac), smac)) {
-		printf("%s: %s [3]\n", __func__, mystrerr);
-		err++;
-	}
+int set_spi_arc_product(int argc, char *const argv[])
+{
+	int i, err = 1;
 
-	if (spi_flash_write(flash, FIRM_ADDR4, sizeof(smac), smac)) {
-		printf("%s: %s [4]\n", __func__, mystrerr);
-		err++;
+	flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
+				CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
+	if (!flash) {
+		printf("Failed to initialize SPI flash at %u:%u\n",
+		       CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS);
+		return -1;
 	}
 
-	if (err == 4) {
-		printf("%s: %s [ALL]\n", __func__, mystrerr);
+	/* Save factory defaults */
+	for (i = 0; i < MAX_FWENV_ADDR; i++)
+		if (fwenv_addr[i] != -1)
+			if (spi_flash_write
+			    (flash, fwenv_addr[i], sizeof(smac), smac))
+				printf("%s: %s [%d]\n", __func__, mystrerr, i);
+			else
+				err = 0;
+	if (err)
 		return -2;
-	}
 
-	return 0;
+	return err;
 }
 
-int get_arc_info(void)
+static int read_spi_arc_info(void)
 {
-	int location = 1;
-	char *myerr = "ERROR: Failed to read all 4 factory info spi locations";
+	int i;
 
 	flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
 				CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
+	if (!flash) {
+		printf("Failed to initialize SPI flash@%u:%u\n",
+		       CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS);
+		return 0;
+	}
+	for (i = 0; i < MAX_FWENV_ADDR; i++)
+		if (fwenv_addr[i] != -1)
+			if (!spi_flash_read
+			    (flash, fwenv_addr[i], sizeof(smac), smac))
+				return (i + 1);
+	return 0;
+}
+#endif
+
+#if (FWENV_TYPE == FWENV_NOR_FLASH)
 
-	if (spi_flash_read(flash, FIRM_ADDR1, sizeof(smac), smac)) {
-		location++;
-		if (spi_flash_read(flash, FIRM_ADDR2, sizeof(smac), smac)) {
-			location++;
-			if (spi_flash_read(flash, FIRM_ADDR3, sizeof(smac),
-					   smac)) {
-				location++;
-				if (spi_flash_read(flash, FIRM_ADDR4,
-						   sizeof(smac), smac)) {
-					printf("%s: %s\n", __func__, myerr);
-					return -2;
-				}
-			}
+static char smac[4][18];
+
+int set_nor_arc_product(int argc, char *const argv[])
+{
+	int i, err = 1;
+
+	/* Save factory defaults */
+	for (i = 0; i < MAX_FWENV_ADDR; i++)
+		if (fwenv_addr[i] != -1) {
+			ulong fwenv_end = fwenv_addr[i] + 4;
+
+			flash_sect_roundb(&fwenv_end);
+			flash_sect_protect(0, fwenv_addr[i], fwenv_end);
+			if (flash_write
+			    ((char *)smac, fwenv_addr[i], sizeof(smac)))
+				printf("%s: %s [%d]\n", __func__, mystrerr, i);
+			else
+				err = 0;
+			flash_sect_protect(1, fwenv_addr[i], fwenv_end);
 		}
-	}
-	if (smac[3][0] != 0) {
-		if (location > 1)
-			printf("Using region %d\n", location);
-		printf("SERIAL: ");
-		if (smac[3][0] == 0xFF) {
-			printf("\t<not found>\n");
-		} else {
-			printf("\t%s\n", smac[3]);
-			env_set("SERIAL", smac[3]);
+	if (err)
+		return -2;
+
+	return err;
+}
+
+static int read_nor_arc_info(void)
+{
+	int i;
+
+	for (i = 0; i < MAX_FWENV_ADDR; i++)
+		if (fwenv_addr[i] != -1) {
+			memcpy(smac, (void *)fwenv_addr[i], sizeof(smac));
+			return (i + 1);
 		}
+
+	return 0;
+}
+#endif
+
+int set_arc_product(int argc, char *const argv[])
+{
+	if (argc != 5)
+		return -1;
+
+	/* Check serial number */
+	if (strlen(argv[1]) != MAX_SERIAL_SIZE)
+		return -1;
+
+	/* Check HWaddrs */
+	if (ishwaddr(argv[2]) || ishwaddr(argv[3]) || ishwaddr(argv[4]))
+		return -1;
+
+	strcpy(smac[0], argv[1]);
+	strcpy(smac[1], argv[2]);
+	strcpy(smac[2], argv[3]);
+	strcpy(smac[3], argv[4]);
+
+#if (FWENV_TYPE == FWENV_NOR_FLASH)
+	return set_nor_arc_product(argc, argv);
+#endif
+#if (FWENV_TYPE == FWENV_SPI_FLASH)
+	return set_spi_arc_product(argc, argv);
+#endif
+#if (FWENV_TYPE == FWENV_MMC)
+	return set_mmc_arc_product(argc, argv);
+#endif
+	return -2;
+}
+
+static int read_arc_info(void)
+{
+#if (FWENV_TYPE == FWENV_NOR_FLASH)
+	return read_nor_arc_info();
+#endif
+#if (FWENV_TYPE == FWENV_SPI_FLASH)
+	return read_spi_arc_info();
+#endif
+#if (FWENV_TYPE == FWENV_MMC)
+	return read_mmc_arc_info();
+#endif
+	return 0;
+}
+
+static int do_get_arc_info(void)
+{
+	int l = read_arc_info();
+	char *oldserial = env_get("SERIAL");
+	char *oldversion = env_get("VERSION");
+
+	if (oldversion != NULL)
+		if (strcmp(oldversion, U_BOOT_VERSION) != 0)
+			oldversion = NULL;
+
+	if (l == 0) {
+		printf("%s: failed to read factory info\n", __func__);
+		return -2;
 	}
 
-	if (strcmp(smac[2], "00:00:00:00:00:00") == 0)
-		return 0;
+	printf("\rSERIAL:  ");
+	if (smac[0][0] == EMPY_CHAR) {
+		printf("<not found>\n");
+	} else {
+		printf("%s\n", smac[0]);
+		env_set("SERIAL", smac[0]);
+	}
 
-	printf("HWADDR0:");
-	if (smac[2][0] == 0xFF) {
-		printf("\t<not found>\n");
+	if (strcmp(smac[1], "00:00:00:00:00:00") == 0) {
+		env_set("ethaddr", NULL);
+		env_set("eth1addr", NULL);
+		env_set("eth2addr", NULL);
+		goto done;
+	}
+
+	printf("HWADDR0: ");
+	if (smac[1][0] == EMPY_CHAR) {
+		printf("<not found>\n");
 	} else {
 		char *ret = env_get("ethaddr");
 
-		if (strcmp(ret, __stringify(CONFIG_ETHADDR)) == 0) {
-			env_set("ethaddr", smac[2]);
-			printf("\t%s (factory)\n", smac[2]);
+		if (ret == NULL) {
+			env_set("ethaddr", smac[1]);
+			printf("%s\n", smac[1]);
+		} else if (strcmp(ret, __stringify(CONFIG_ETHADDR)) == 0) {
+			env_set("ethaddr", smac[1]);
+			printf("%s (factory)\n", smac[1]);
 		} else {
-			printf("\t%s\n", ret);
+			printf("%s\n", ret);
 		}
 	}
 
-	if (strcmp(smac[1], "00:00:00:00:00:00") == 0) {
-		env_set("eth1addr", smac[2]);
-		env_set("eth2addr", smac[2]);
-		return 0;
+	if (strcmp(smac[2], "00:00:00:00:00:00") == 0) {
+		env_set("eth1addr", NULL);
+		env_set("eth2addr", NULL);
+		goto done;
 	}
 
-	printf("HWADDR1:");
-	if (smac[1][0] == 0xFF) {
-		printf("\t<not found>\n");
+	printf("HWADDR1: ");
+	if (smac[2][0] == EMPY_CHAR) {
+		printf("<not found>\n");
 	} else {
 		char *ret = env_get("eth1addr");
 
-		if (strcmp(ret, __stringify(CONFIG_ETH1ADDR)) == 0) {
-			env_set("eth1addr", smac[1]);
-			printf("\t%s (factory)\n", smac[1]);
+		if (ret == NULL) {
+			env_set("ethaddr", smac[2]);
+			printf("%s\n", smac[2]);
+		} else if (strcmp(ret, __stringify(CONFIG_ETH1ADDR)) == 0) {
+			env_set("eth1addr", smac[2]);
+			printf("%s (factory)\n", smac[2]);
 		} else {
-			printf("\t%s\n", ret);
+			printf("%s\n", ret);
 		}
 	}
 
-	if (strcmp(smac[0], "00:00:00:00:00:00") == 0) {
-		env_set("eth2addr", smac[1]);
-		return 0;
+	if (strcmp(smac[3], "00:00:00:00:00:00") == 0) {
+		env_set("eth2addr", NULL);
+		goto done;
 	}
 
-	printf("HWADDR2:");
-	if (smac[0][0] == 0xFF) {
-		printf("\t<not found>\n");
+	printf("HWADDR2: ");
+	if (smac[3][0] == EMPY_CHAR) {
+		printf("<not found>\n");
 	} else {
 		char *ret = env_get("eth2addr");
 
-		if (strcmp(ret, __stringify(CONFIG_ETH2ADDR)) == 0) {
-			env_set("eth2addr", smac[0]);
-			printf("\t%s (factory)\n", smac[0]);
+		if (ret == NULL) {
+			env_set("ethaddr", smac[3]);
+			printf("%s\n", smac[3]);
+		} else if (strcmp(ret, __stringify(CONFIG_ETH2ADDR)) == 0) {
+			env_set("eth2addr", smac[3]);
+			printf("%s (factory)\n", smac[3]);
 		} else {
-			printf("\t%s\n", ret);
+			printf("%s\n", ret);
 		}
 	}
+done:
+	if (oldserial == NULL || oldversion == NULL) {
+		if (oldversion == NULL)
+			env_set("VERSION", U_BOOT_VERSION);
+		env_save();
+	}
 
 	return 0;
 }
 
-static int do_arc_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+static int init_fwenv(void)
+{
+	int i, ret = -1;
+
+	fwenv_addr[0] = FWENV_ADDR1;
+	fwenv_addr[1] = FWENV_ADDR2;
+	fwenv_addr[2] = FWENV_ADDR3;
+	fwenv_addr[3] = FWENV_ADDR4;
+
+	for (i = 0; i < MAX_FWENV_ADDR; i++)
+		if (fwenv_addr[i] != -1)
+			ret = 0;
+	if (ret)
+		printf("%s: No firmfare info storage address is defined\n",
+		       __func__);
+	return ret;
+}
+
+void get_arc_info(void)
+{
+	if (!init_fwenv())
+		do_get_arc_info();
+}
+
+static int do_arc_cmd(cmd_tbl_t * cmdtp, int flag, int argc, char *const argv[])
 {
 	const char *cmd;
 	int ret = -1;
@@ -196,15 +383,14 @@ static int do_arc_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
 	--argc;
 	++argv;
 
-	if (strcmp(cmd, "product") == 0) {
+	if (init_fwenv())
+		return ret;
+
+	if (strcmp(cmd, "product") == 0)
 		ret = set_arc_product(argc, argv);
-		goto done;
-	}
-	if (strcmp(cmd, "info") == 0) {
-		ret = get_arc_info();
-		goto done;
-	}
-done:
+	else if (strcmp(cmd, "info") == 0)
+		ret = do_get_arc_info();
+
 	if (ret == -1)
 		return CMD_RET_USAGE;
 
diff --git a/board/Arcturus/ucp1020/ucp1020.c b/board/Arcturus/ucp1020/ucp1020.c
index 1a1fcb9be9..54fd1782cb 100644
--- a/board/Arcturus/ucp1020/ucp1020.c
+++ b/board/Arcturus/ucp1020/ucp1020.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * Copyright 2013-2015 Arcturus Networks, Inc.
- *           http://www.arcturusnetworks.com/products/ucp1020/
+ * Copyright 2013-2019 Arcturus Networks, Inc.
+ *           https://www.arcturusnetworks.com/products/ucp1020/
  *           by Oleksandr G Zhadan et al.
  * based on board/freescale/p1_p2_rdb_pc/spl.c
  * original copyright follows:
@@ -108,7 +108,9 @@ int checkboard(void)
 {
 	printf("Board: %s\n", CONFIG_BOARDNAME_LOCAL);
 	board_gpio_init();
+#ifdef CONFIG_MMC
 	printf("SD/MMC: 4-bit Mode\n");
+#endif
 
 	return 0;
 }
@@ -193,7 +195,9 @@ int last_stage_init(void)
 	static char newkernelargs[256];
 	static u8 id1[16];
 	static u8 id2;
+#ifdef CONFIG_MMC
 	struct mmc *mmc;
+#endif
 	char *sval, *kval;
 
 	if (i2c_read(CONFIG_SYS_I2C_IDT6V49205B, 7, 1, &id1[0], 2) < 0) {
@@ -215,6 +219,7 @@ int last_stage_init(void)
 
 	kval = env_get("kernelargs");
 
+#ifdef CONFIG_MMC
 	mmc = find_mmc_device(0);
 	if (mmc)
 		if (!mmc_init(mmc)) {
@@ -234,6 +239,7 @@ int last_stage_init(void)
 				env_set("kernelargs", mmckargs);
 			}
 		}
+#endif
 	get_arc_info();
 
 	if (kval) {
diff --git a/board/Arcturus/ucp1020/ucp1020.h b/board/Arcturus/ucp1020/ucp1020.h
index cf1ddd718b..1b527cdb1c 100644
--- a/board/Arcturus/ucp1020/ucp1020.h
+++ b/board/Arcturus/ucp1020/ucp1020.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2013-2015 Arcturus Networks, Inc.
- *           http://www.arcturusnetworks.com/products/ucp1020/
+ * Copyright 2013-2019 Arcturus Networks, Inc.
+ *           https://www.arcturusnetworks.com/products/ucp1020/
  *           by Oleksandr G Zhadan et al.
  */
 
@@ -35,8 +35,10 @@
 
 #define GPIO_WD		GPIO15
 
+#ifdef CONFIG_MMC
 static char *defkargs = "root=/dev/mtdblock1 rootfstype=cramfs ro";
 static char *mmckargs = "root=/dev/mmcblk0p1 rootwait rw";
+#endif
 
 int get_arc_info(void);
 
diff --git a/configs/UCP1020_defconfig b/configs/UCP1020_defconfig
index 0a676d48c9..128f10fa5d 100644
--- a/configs/UCP1020_defconfig
+++ b/configs/UCP1020_defconfig
@@ -19,12 +19,9 @@ CONFIG_AUTOBOOT_STOP_STR="\x1b"
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
 # CONFIG_CMD_NAND is not set
-CONFIG_CMD_MMC_SPI=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
+# CONFIG_CMD_PCI is not set
+# CONFIG_CMD_SATA is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
@@ -35,26 +32,18 @@ CONFIG_CMD_CRAMFS=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
 CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_FSL_ESDHC=y
+# CONFIG_SATA_SIL is not set
+# CONFIG_MMC is not set
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
 CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_SST=y
-CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_PHY_MARVELL=y
 CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
 CONFIG_MII=y
 CONFIG_TSEC_ENET=y
+# CONFIG_PCI is not set
 CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
 CONFIG_FS_CRAMFS=y
 CONFIG_OF_LIBFDT=y
diff --git a/include/configs/UCP1020.h b/include/configs/UCP1020.h
index b518c222d4..dd5b782b79 100644
--- a/include/configs/UCP1020.h
+++ b/include/configs/UCP1020.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2013-2015 Arcturus Networks, Inc.
- *           http://www.arcturusnetworks.com/products/ucp1020/
+ * Copyright 2013-2019 Arcturus Networks, Inc.
+ *           https://www.arcturusnetworks.com/products/ucp1020/
  * based on include/configs/p1_p2_rdb_pc.h
  * original copyright follows:
  * Copyright 2009-2011 Freescale Semiconductor, Inc.
@@ -13,6 +13,62 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+/*** Arcturus FirmWare Environment */
+
+#define MAX_SERIAL_SIZE 15
+#define MAX_HWADDR_SIZE 17
+
+#define MAX_FWENV_ADDR	4
+
+#define FWENV_MMC	1
+#define FWENV_SPI_FLASH	2
+#define FWENV_NOR_FLASH	3
+/*
+ #define FWENV_TYPE    FWENV_MMC
+ #define FWENV_TYPE    FWENV_SPI_FLASH
+*/
+#define FWENV_TYPE	FWENV_NOR_FLASH
+
+#if (FWENV_TYPE == FWENV_MMC)
+#ifndef CONFIG_SYS_MMC_ENV_DEV
+#define CONFIG_SYS_MMC_ENV_DEV 1
+#endif
+#define FWENV_ADDR1 -1
+#define FWENV_ADDR2 -1
+#define FWENV_ADDR3 -1
+#define FWENV_ADDR4 -1
+#define EMPY_CHAR 0
+#endif
+
+#if (FWENV_TYPE == FWENV_SPI_FLASH)
+#ifndef CONFIG_SF_DEFAULT_SPEED
+#define CONFIG_SF_DEFAULT_SPEED	1000000
+#endif
+#ifndef CONFIG_SF_DEFAULT_MODE
+#define CONFIG_SF_DEFAULT_MODE	SPI_MODE0
+#endif
+#ifndef CONFIG_SF_DEFAULT_CS
+#define CONFIG_SF_DEFAULT_CS	0
+#endif
+#ifndef CONFIG_SF_DEFAULT_BUS
+#define CONFIG_SF_DEFAULT_BUS	0
+#endif
+#define FWENV_ADDR1 (0x200 - sizeof(smac))
+#define FWENV_ADDR2 (0x400 - sizeof(smac))
+#define FWENV_ADDR3 (CONFIG_ENV_SECT_SIZE + 0x200 - sizeof(smac))
+#define FWENV_ADDR4 (CONFIG_ENV_SECT_SIZE + 0x400 - sizeof(smac))
+#define EMPY_CHAR 0xff
+#endif
+
+#if (FWENV_TYPE == FWENV_NOR_FLASH)
+#define FWENV_ADDR1 0xEC080000
+#define FWENV_ADDR2 -1
+#define FWENV_ADDR3 -1
+#define FWENV_ADDR4 -1
+#define EMPY_CHAR 0xff
+#endif
+/***********************************/
+
 #define CONFIG_PCIE1	/* PCIE controller 1 (slot 1) */
 #define CONFIG_PCIE2	/* PCIE controller 2 (slot 2) */
 #define CONFIG_FSL_PCI_INIT	/* Use common FSL init code */
@@ -38,8 +94,6 @@
 #define CONFIG_NETMASK		255.255.252.0
 #define CONFIG_ETHPRIME		"eTSEC3"
 
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-
 #define CONFIG_SYS_L2_SIZE	(256 << 10)
 
 #endif
@@ -52,7 +106,6 @@
 #define CONFIG_BOARDNAME_LOCAL "uCP1020-64EEE512-OU1-XR"
 
 #define CONFIG_TSEC1
-#define CONFIG_TSEC2
 #define CONFIG_TSEC3
 #define CONFIG_HAS_ETH0
 #define CONFIG_HAS_ETH1
@@ -68,7 +121,7 @@
 #define CONFIG_NETMASK		255.255.255.0
 #define CONFIG_ETHPRIME		"eTSEC1"
 
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+#undef CONFIG_SYS_REDUNDAND_ENVIRONMENT
 
 #define CONFIG_SYS_L2_SIZE	(256 << 10)
 
-- 
2.16.4

^ permalink raw reply related	[flat|nested] 2+ messages in thread