* [PATCH v5] cpufreq/pasemi: fix an use-after-free in pas_cpufreq_cpu_init()
@ 2019-07-09 8:04 ` Wen Yang
0 siblings, 0 replies; 6+ messages in thread
From: Wen Yang @ 2019-07-09 8:04 UTC (permalink / raw)
To: linux-kernel
Cc: xue.zhihong, wang.yi59, cheng.shengyu, Wen Yang,
Rafael J. Wysocki, Viresh Kumar, Michael Ellerman, linuxppc-dev,
linux-pm
The cpu variable is still being used in the of_get_property() call
after the of_node_put() call, which may result in use-after-free.
Fixes: a9acc26b75f ("cpufreq/pasemi: fix possible object reference leak")
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
v5: put together the code to get, use, and release cpu device_node.
v4: restore the blank line.
v3: fix a leaked reference.
v2: clean up the code according to the advice of viresh.
drivers/cpufreq/pasemi-cpufreq.c | 21 +++++++++------------
1 file changed, 9 insertions(+), 12 deletions(-)
diff --git a/drivers/cpufreq/pasemi-cpufreq.c b/drivers/cpufreq/pasemi-cpufreq.c
index 6b1e4ab..1f0beb7 100644
--- a/drivers/cpufreq/pasemi-cpufreq.c
+++ b/drivers/cpufreq/pasemi-cpufreq.c
@@ -131,10 +131,17 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
int err = -ENODEV;
cpu = of_get_cpu_node(policy->cpu, NULL);
-
- of_node_put(cpu);
if (!cpu)
goto out;
+ max_freqp = of_get_property(cpu, "clock-frequency", NULL);
+ of_node_put(cpu);
+ if (!max_freqp) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ /* we need the freq in kHz */
+ max_freq = *max_freqp / 1000;
dn = of_find_compatible_node(NULL, NULL, "1682m-sdc");
if (!dn)
@@ -171,16 +178,6 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
}
pr_debug("init cpufreq on CPU %d\n", policy->cpu);
-
- max_freqp = of_get_property(cpu, "clock-frequency", NULL);
- if (!max_freqp) {
- err = -EINVAL;
- goto out_unmap_sdcpwr;
- }
-
- /* we need the freq in kHz */
- max_freq = *max_freqp / 1000;
-
pr_debug("max clock-frequency is at %u kHz\n", max_freq);
pr_debug("initializing frequency table\n");
--
2.9.5
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v5] cpufreq/pasemi: fix an use-after-free in pas_cpufreq_cpu_init()
@ 2019-07-09 8:04 ` Wen Yang
0 siblings, 0 replies; 6+ messages in thread
From: Wen Yang @ 2019-07-09 8:04 UTC (permalink / raw)
To: linux-kernel
Cc: wang.yi59, linux-pm, Viresh Kumar, Rafael J. Wysocki,
xue.zhihong, cheng.shengyu, linuxppc-dev, Wen Yang
The cpu variable is still being used in the of_get_property() call
after the of_node_put() call, which may result in use-after-free.
Fixes: a9acc26b75f ("cpufreq/pasemi: fix possible object reference leak")
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
v5: put together the code to get, use, and release cpu device_node.
v4: restore the blank line.
v3: fix a leaked reference.
v2: clean up the code according to the advice of viresh.
drivers/cpufreq/pasemi-cpufreq.c | 21 +++++++++------------
1 file changed, 9 insertions(+), 12 deletions(-)
diff --git a/drivers/cpufreq/pasemi-cpufreq.c b/drivers/cpufreq/pasemi-cpufreq.c
index 6b1e4ab..1f0beb7 100644
--- a/drivers/cpufreq/pasemi-cpufreq.c
+++ b/drivers/cpufreq/pasemi-cpufreq.c
@@ -131,10 +131,17 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
int err = -ENODEV;
cpu = of_get_cpu_node(policy->cpu, NULL);
-
- of_node_put(cpu);
if (!cpu)
goto out;
+ max_freqp = of_get_property(cpu, "clock-frequency", NULL);
+ of_node_put(cpu);
+ if (!max_freqp) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ /* we need the freq in kHz */
+ max_freq = *max_freqp / 1000;
dn = of_find_compatible_node(NULL, NULL, "1682m-sdc");
if (!dn)
@@ -171,16 +178,6 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
}
pr_debug("init cpufreq on CPU %d\n", policy->cpu);
-
- max_freqp = of_get_property(cpu, "clock-frequency", NULL);
- if (!max_freqp) {
- err = -EINVAL;
- goto out_unmap_sdcpwr;
- }
-
- /* we need the freq in kHz */
- max_freq = *max_freqp / 1000;
-
pr_debug("max clock-frequency is at %u kHz\n", max_freq);
pr_debug("initializing frequency table\n");
--
2.9.5
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v5] cpufreq/pasemi: fix an use-after-free in pas_cpufreq_cpu_init()
2019-07-09 8:04 ` Wen Yang
@ 2019-07-09 8:12 ` Viresh Kumar
-1 siblings, 0 replies; 6+ messages in thread
From: Viresh Kumar @ 2019-07-09 8:12 UTC (permalink / raw)
To: Wen Yang
Cc: linux-kernel, xue.zhihong, wang.yi59, cheng.shengyu,
Rafael J. Wysocki, Michael Ellerman, linuxppc-dev, linux-pm
On 09-07-19, 16:04, Wen Yang wrote:
> The cpu variable is still being used in the of_get_property() call
> after the of_node_put() call, which may result in use-after-free.
>
> Fixes: a9acc26b75f ("cpufreq/pasemi: fix possible object reference leak")
> Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
> Cc: Viresh Kumar <viresh.kumar@linaro.org>
> Cc: Michael Ellerman <mpe@ellerman.id.au>
> Cc: linuxppc-dev@lists.ozlabs.org
> Cc: linux-pm@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> ---
> v5: put together the code to get, use, and release cpu device_node.
> v4: restore the blank line.
> v3: fix a leaked reference.
> v2: clean up the code according to the advice of viresh.
>
> drivers/cpufreq/pasemi-cpufreq.c | 21 +++++++++------------
> 1 file changed, 9 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/cpufreq/pasemi-cpufreq.c b/drivers/cpufreq/pasemi-cpufreq.c
> index 6b1e4ab..1f0beb7 100644
> --- a/drivers/cpufreq/pasemi-cpufreq.c
> +++ b/drivers/cpufreq/pasemi-cpufreq.c
> @@ -131,10 +131,17 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
> int err = -ENODEV;
>
> cpu = of_get_cpu_node(policy->cpu, NULL);
> -
> - of_node_put(cpu);
> if (!cpu)
> goto out;
I would have loved a blank line here :)
> + max_freqp = of_get_property(cpu, "clock-frequency", NULL);
> + of_node_put(cpu);
> + if (!max_freqp) {
> + err = -EINVAL;
> + goto out;
> + }
> +
> + /* we need the freq in kHz */
> + max_freq = *max_freqp / 1000;
>
> dn = of_find_compatible_node(NULL, NULL, "1682m-sdc");
> if (!dn)
> @@ -171,16 +178,6 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
> }
>
> pr_debug("init cpufreq on CPU %d\n", policy->cpu);
> -
> - max_freqp = of_get_property(cpu, "clock-frequency", NULL);
> - if (!max_freqp) {
> - err = -EINVAL;
> - goto out_unmap_sdcpwr;
> - }
> -
> - /* we need the freq in kHz */
> - max_freq = *max_freqp / 1000;
> -
> pr_debug("max clock-frequency is at %u kHz\n", max_freq);
> pr_debug("initializing frequency table\n");
Though, enough versions have happened now.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
--
viresh
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v5] cpufreq/pasemi: fix an use-after-free in pas_cpufreq_cpu_init()
@ 2019-07-09 8:12 ` Viresh Kumar
0 siblings, 0 replies; 6+ messages in thread
From: Viresh Kumar @ 2019-07-09 8:12 UTC (permalink / raw)
To: Wen Yang
Cc: wang.yi59, linux-pm, Rafael J. Wysocki, linux-kernel,
xue.zhihong, cheng.shengyu, linuxppc-dev
On 09-07-19, 16:04, Wen Yang wrote:
> The cpu variable is still being used in the of_get_property() call
> after the of_node_put() call, which may result in use-after-free.
>
> Fixes: a9acc26b75f ("cpufreq/pasemi: fix possible object reference leak")
> Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
> Cc: Viresh Kumar <viresh.kumar@linaro.org>
> Cc: Michael Ellerman <mpe@ellerman.id.au>
> Cc: linuxppc-dev@lists.ozlabs.org
> Cc: linux-pm@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> ---
> v5: put together the code to get, use, and release cpu device_node.
> v4: restore the blank line.
> v3: fix a leaked reference.
> v2: clean up the code according to the advice of viresh.
>
> drivers/cpufreq/pasemi-cpufreq.c | 21 +++++++++------------
> 1 file changed, 9 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/cpufreq/pasemi-cpufreq.c b/drivers/cpufreq/pasemi-cpufreq.c
> index 6b1e4ab..1f0beb7 100644
> --- a/drivers/cpufreq/pasemi-cpufreq.c
> +++ b/drivers/cpufreq/pasemi-cpufreq.c
> @@ -131,10 +131,17 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
> int err = -ENODEV;
>
> cpu = of_get_cpu_node(policy->cpu, NULL);
> -
> - of_node_put(cpu);
> if (!cpu)
> goto out;
I would have loved a blank line here :)
> + max_freqp = of_get_property(cpu, "clock-frequency", NULL);
> + of_node_put(cpu);
> + if (!max_freqp) {
> + err = -EINVAL;
> + goto out;
> + }
> +
> + /* we need the freq in kHz */
> + max_freq = *max_freqp / 1000;
>
> dn = of_find_compatible_node(NULL, NULL, "1682m-sdc");
> if (!dn)
> @@ -171,16 +178,6 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
> }
>
> pr_debug("init cpufreq on CPU %d\n", policy->cpu);
> -
> - max_freqp = of_get_property(cpu, "clock-frequency", NULL);
> - if (!max_freqp) {
> - err = -EINVAL;
> - goto out_unmap_sdcpwr;
> - }
> -
> - /* we need the freq in kHz */
> - max_freq = *max_freqp / 1000;
> -
> pr_debug("max clock-frequency is at %u kHz\n", max_freq);
> pr_debug("initializing frequency table\n");
Though, enough versions have happened now.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
--
viresh
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v5] cpufreq/pasemi: fix an use-after-free in pas_cpufreq_cpu_init()
2019-07-09 8:12 ` Viresh Kumar
@ 2019-07-10 10:07 ` Rafael J. Wysocki
-1 siblings, 0 replies; 6+ messages in thread
From: Rafael J. Wysocki @ 2019-07-10 10:07 UTC (permalink / raw)
To: Viresh Kumar, Wen Yang
Cc: linux-kernel, xue.zhihong, wang.yi59, cheng.shengyu,
Michael Ellerman, linuxppc-dev, linux-pm
On Tuesday, July 9, 2019 10:12:05 AM CEST Viresh Kumar wrote:
> On 09-07-19, 16:04, Wen Yang wrote:
> > The cpu variable is still being used in the of_get_property() call
> > after the of_node_put() call, which may result in use-after-free.
> >
> > Fixes: a9acc26b75f ("cpufreq/pasemi: fix possible object reference leak")
> > Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
> > Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
> > Cc: Viresh Kumar <viresh.kumar@linaro.org>
> > Cc: Michael Ellerman <mpe@ellerman.id.au>
> > Cc: linuxppc-dev@lists.ozlabs.org
> > Cc: linux-pm@vger.kernel.org
> > Cc: linux-kernel@vger.kernel.org
Patch applied.
> > ---
> > v5: put together the code to get, use, and release cpu device_node.
> > v4: restore the blank line.
> > v3: fix a leaked reference.
> > v2: clean up the code according to the advice of viresh.
> >
> > drivers/cpufreq/pasemi-cpufreq.c | 21 +++++++++------------
> > 1 file changed, 9 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/cpufreq/pasemi-cpufreq.c b/drivers/cpufreq/pasemi-cpufreq.c
> > index 6b1e4ab..1f0beb7 100644
> > --- a/drivers/cpufreq/pasemi-cpufreq.c
> > +++ b/drivers/cpufreq/pasemi-cpufreq.c
> > @@ -131,10 +131,17 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
> > int err = -ENODEV;
> >
> > cpu = of_get_cpu_node(policy->cpu, NULL);
> > -
> > - of_node_put(cpu);
> > if (!cpu)
> > goto out;
>
> I would have loved a blank line here :)
And I added the blank line.
> > + max_freqp = of_get_property(cpu, "clock-frequency", NULL);
> > + of_node_put(cpu);
> > + if (!max_freqp) {
> > + err = -EINVAL;
> > + goto out;
> > + }
> > +
> > + /* we need the freq in kHz */
> > + max_freq = *max_freqp / 1000;
> >
> > dn = of_find_compatible_node(NULL, NULL, "1682m-sdc");
> > if (!dn)
> > @@ -171,16 +178,6 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
> > }
> >
> > pr_debug("init cpufreq on CPU %d\n", policy->cpu);
> > -
> > - max_freqp = of_get_property(cpu, "clock-frequency", NULL);
> > - if (!max_freqp) {
> > - err = -EINVAL;
> > - goto out_unmap_sdcpwr;
> > - }
> > -
> > - /* we need the freq in kHz */
> > - max_freq = *max_freqp / 1000;
> > -
> > pr_debug("max clock-frequency is at %u kHz\n", max_freq);
> > pr_debug("initializing frequency table\n");
>
> Though, enough versions have happened now.
>
> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
>
>
Thanks!
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v5] cpufreq/pasemi: fix an use-after-free in pas_cpufreq_cpu_init()
@ 2019-07-10 10:07 ` Rafael J. Wysocki
0 siblings, 0 replies; 6+ messages in thread
From: Rafael J. Wysocki @ 2019-07-10 10:07 UTC (permalink / raw)
To: Viresh Kumar, Wen Yang
Cc: wang.yi59, linux-pm, linux-kernel, xue.zhihong, cheng.shengyu,
linuxppc-dev
On Tuesday, July 9, 2019 10:12:05 AM CEST Viresh Kumar wrote:
> On 09-07-19, 16:04, Wen Yang wrote:
> > The cpu variable is still being used in the of_get_property() call
> > after the of_node_put() call, which may result in use-after-free.
> >
> > Fixes: a9acc26b75f ("cpufreq/pasemi: fix possible object reference leak")
> > Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
> > Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
> > Cc: Viresh Kumar <viresh.kumar@linaro.org>
> > Cc: Michael Ellerman <mpe@ellerman.id.au>
> > Cc: linuxppc-dev@lists.ozlabs.org
> > Cc: linux-pm@vger.kernel.org
> > Cc: linux-kernel@vger.kernel.org
Patch applied.
> > ---
> > v5: put together the code to get, use, and release cpu device_node.
> > v4: restore the blank line.
> > v3: fix a leaked reference.
> > v2: clean up the code according to the advice of viresh.
> >
> > drivers/cpufreq/pasemi-cpufreq.c | 21 +++++++++------------
> > 1 file changed, 9 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/cpufreq/pasemi-cpufreq.c b/drivers/cpufreq/pasemi-cpufreq.c
> > index 6b1e4ab..1f0beb7 100644
> > --- a/drivers/cpufreq/pasemi-cpufreq.c
> > +++ b/drivers/cpufreq/pasemi-cpufreq.c
> > @@ -131,10 +131,17 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
> > int err = -ENODEV;
> >
> > cpu = of_get_cpu_node(policy->cpu, NULL);
> > -
> > - of_node_put(cpu);
> > if (!cpu)
> > goto out;
>
> I would have loved a blank line here :)
And I added the blank line.
> > + max_freqp = of_get_property(cpu, "clock-frequency", NULL);
> > + of_node_put(cpu);
> > + if (!max_freqp) {
> > + err = -EINVAL;
> > + goto out;
> > + }
> > +
> > + /* we need the freq in kHz */
> > + max_freq = *max_freqp / 1000;
> >
> > dn = of_find_compatible_node(NULL, NULL, "1682m-sdc");
> > if (!dn)
> > @@ -171,16 +178,6 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
> > }
> >
> > pr_debug("init cpufreq on CPU %d\n", policy->cpu);
> > -
> > - max_freqp = of_get_property(cpu, "clock-frequency", NULL);
> > - if (!max_freqp) {
> > - err = -EINVAL;
> > - goto out_unmap_sdcpwr;
> > - }
> > -
> > - /* we need the freq in kHz */
> > - max_freq = *max_freqp / 1000;
> > -
> > pr_debug("max clock-frequency is at %u kHz\n", max_freq);
> > pr_debug("initializing frequency table\n");
>
> Though, enough versions have happened now.
>
> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
>
>
Thanks!
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-07-10 10:08 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-09 8:04 [PATCH v5] cpufreq/pasemi: fix an use-after-free in pas_cpufreq_cpu_init() Wen Yang
2019-07-09 8:04 ` Wen Yang
2019-07-09 8:12 ` Viresh Kumar
2019-07-09 8:12 ` Viresh Kumar
2019-07-10 10:07 ` Rafael J. Wysocki
2019-07-10 10:07 ` Rafael J. Wysocki
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.