[PATCH] staging: greybus: add logging statement when kfifo_alloc fails

[PATCH] staging: greybus: add logging statement when kfifo_alloc fails

[Keyur Patel]

Added missing logging statement when kfifo_alloc fails, to improve
debugging.

Signed-off-by: Keyur Patel <iamkeyur96@gmail.com>
---
 drivers/staging/greybus/uart.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/greybus/uart.c b/drivers/staging/greybus/uart.c
index b3bffe91ae99..86a395ae177d 100644
--- a/drivers/staging/greybus/uart.c
+++ b/drivers/staging/greybus/uart.c
@@ -856,8 +856,10 @@ static int gb_uart_probe(struct gbphy_device *gbphy_dev,
 
 	retval = kfifo_alloc(&gb_tty->write_fifo, GB_UART_WRITE_FIFO_SIZE,
 			     GFP_KERNEL);
-	if (retval)
+	if (retval) {
+		pr_err("kfifo_alloc failed\n");
 		goto exit_buf_free;
+	}
 
 	gb_tty->credits = GB_UART_FIRMWARE_CREDITS;
 	init_completion(&gb_tty->credits_complete);
-- 
2.22.0

[PATCH] staging: greybus: add logging statement when kfifo_alloc fails

[Keyur Patel]

Added missing logging statement when kfifo_alloc fails, to improve
debugging.

Signed-off-by: Keyur Patel <iamkeyur96@gmail.com>
---
 drivers/staging/greybus/uart.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/greybus/uart.c b/drivers/staging/greybus/uart.c
index b3bffe91ae99..86a395ae177d 100644
--- a/drivers/staging/greybus/uart.c
+++ b/drivers/staging/greybus/uart.c
@@ -856,8 +856,10 @@ static int gb_uart_probe(struct gbphy_device *gbphy_dev,
 
 	retval = kfifo_alloc(&gb_tty->write_fifo, GB_UART_WRITE_FIFO_SIZE,
 			     GFP_KERNEL);
-	if (retval)
+	if (retval) {
+		pr_err("kfifo_alloc failed\n");
 		goto exit_buf_free;
+	}
 
 	gb_tty->credits = GB_UART_FIRMWARE_CREDITS;
 	init_completion(&gb_tty->credits_complete);
-- 
2.22.0

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Re: [PATCH] staging: greybus: add logging statement when kfifo_alloc fails

[Keyur Patel]

On Wed, Jul 10, 2019 at 06:35:38PM +0200, Greg Kroah-Hartman wrote:
> On Wed, Jul 10, 2019 at 08:20:17AM -0400, Keyur Patel wrote:
> > Added missing logging statement when kfifo_alloc fails, to improve
> > debugging.
> > 
> > Signed-off-by: Keyur Patel <iamkeyur96@gmail.com>
> > ---
> >  drivers/staging/greybus/uart.c | 4 +++-
> >  1 file changed, 3 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/staging/greybus/uart.c b/drivers/staging/greybus/uart.c
> > index b3bffe91ae99..86a395ae177d 100644
> > --- a/drivers/staging/greybus/uart.c
> > +++ b/drivers/staging/greybus/uart.c
> > @@ -856,8 +856,10 @@ static int gb_uart_probe(struct gbphy_device *gbphy_dev,
> >  
> >  	retval = kfifo_alloc(&gb_tty->write_fifo, GB_UART_WRITE_FIFO_SIZE,
> >  			     GFP_KERNEL);
> > -	if (retval)
> > +	if (retval) {
> > +		pr_err("kfifo_alloc failed\n");
> >  		goto exit_buf_free;
> > +	}
> 
> You should have already gotten an error message from the log if this
> fails, from the kmalloc_array() call failing, right?
> 
> So why is this needed?  We have been trying to remove these types of
> messages and keep them in the "root" place where the failure happens.
> 
> thanks,
> 
> greg k-h

Didn't notice that. I agree that this will result only into redundancy. 
Quick look over files reveal that there are multiple places
where people are using print statements after memory allocation fails. 
Should I go ahead and send patches to remove those
redundant print statements?

Sorry, if you're receiving this message again.

Thnaks.
Keyur Patel

Re: [PATCH] staging: greybus: add logging statement when kfifo_alloc fails

[Keyur Patel]

On Wed, Jul 10, 2019 at 06:35:38PM +0200, Greg Kroah-Hartman wrote:
> On Wed, Jul 10, 2019 at 08:20:17AM -0400, Keyur Patel wrote:
> > Added missing logging statement when kfifo_alloc fails, to improve
> > debugging.
> > 
> > Signed-off-by: Keyur Patel <iamkeyur96@gmail.com>
> > ---
> >  drivers/staging/greybus/uart.c | 4 +++-
> >  1 file changed, 3 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/staging/greybus/uart.c b/drivers/staging/greybus/uart.c
> > index b3bffe91ae99..86a395ae177d 100644
> > --- a/drivers/staging/greybus/uart.c
> > +++ b/drivers/staging/greybus/uart.c
> > @@ -856,8 +856,10 @@ static int gb_uart_probe(struct gbphy_device *gbphy_dev,
> >  
> >  	retval = kfifo_alloc(&gb_tty->write_fifo, GB_UART_WRITE_FIFO_SIZE,
> >  			     GFP_KERNEL);
> > -	if (retval)
> > +	if (retval) {
> > +		pr_err("kfifo_alloc failed\n");
> >  		goto exit_buf_free;
> > +	}
> 
> You should have already gotten an error message from the log if this
> fails, from the kmalloc_array() call failing, right?
> 
> So why is this needed?  We have been trying to remove these types of
> messages and keep them in the "root" place where the failure happens.
> 
> thanks,
> 
> greg k-h

Didn't notice that. I agree that this will result only into redundancy. 
Quick look over files reveal that there are multiple places
where people are using print statements after memory allocation fails. 
Should I go ahead and send patches to remove those
redundant print statements?

Sorry, if you're receiving this message again.

Thnaks.
Keyur Patel
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Re: [PATCH] staging: greybus: add logging statement when kfifo_alloc fails

[Greg Kroah-Hartman]

On Wed, Jul 10, 2019 at 08:20:17AM -0400, Keyur Patel wrote:
> Added missing logging statement when kfifo_alloc fails, to improve
> debugging.
> 
> Signed-off-by: Keyur Patel <iamkeyur96@gmail.com>
> ---
>  drivers/staging/greybus/uart.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/staging/greybus/uart.c b/drivers/staging/greybus/uart.c
> index b3bffe91ae99..86a395ae177d 100644
> --- a/drivers/staging/greybus/uart.c
> +++ b/drivers/staging/greybus/uart.c
> @@ -856,8 +856,10 @@ static int gb_uart_probe(struct gbphy_device *gbphy_dev,
>  
>  	retval = kfifo_alloc(&gb_tty->write_fifo, GB_UART_WRITE_FIFO_SIZE,
>  			     GFP_KERNEL);
> -	if (retval)
> +	if (retval) {
> +		pr_err("kfifo_alloc failed\n");
>  		goto exit_buf_free;
> +	}

You should have already gotten an error message from the log if this
fails, from the kmalloc_array() call failing, right?

So why is this needed?  We have been trying to remove these types of
messages and keep them in the "root" place where the failure happens.

thanks,

greg k-h

Re: [PATCH] staging: greybus: add logging statement when kfifo_alloc fails

[Greg Kroah-Hartman]

On Wed, Jul 10, 2019 at 08:20:17AM -0400, Keyur Patel wrote:
> Added missing logging statement when kfifo_alloc fails, to improve
> debugging.
> 
> Signed-off-by: Keyur Patel <iamkeyur96@gmail.com>
> ---
>  drivers/staging/greybus/uart.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/staging/greybus/uart.c b/drivers/staging/greybus/uart.c
> index b3bffe91ae99..86a395ae177d 100644
> --- a/drivers/staging/greybus/uart.c
> +++ b/drivers/staging/greybus/uart.c
> @@ -856,8 +856,10 @@ static int gb_uart_probe(struct gbphy_device *gbphy_dev,
>  
>  	retval = kfifo_alloc(&gb_tty->write_fifo, GB_UART_WRITE_FIFO_SIZE,
>  			     GFP_KERNEL);
> -	if (retval)
> +	if (retval) {
> +		pr_err("kfifo_alloc failed\n");
>  		goto exit_buf_free;
> +	}

You should have already gotten an error message from the log if this
fails, from the kmalloc_array() call failing, right?

So why is this needed?  We have been trying to remove these types of
messages and keep them in the "root" place where the failure happens.

thanks,

greg k-h
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Re: [PATCH] staging: greybus: add logging statement when kfifo_alloc fails

[Greg Kroah-Hartman]

On Wed, Jul 10, 2019 at 10:24:06AM -0400, Keyur Patel wrote:
> On Wed, Jul 10, 2019 at 06:35:38PM +0200, Greg Kroah-Hartman wrote:
> > On Wed, Jul 10, 2019 at 08:20:17AM -0400, Keyur Patel wrote:
> > > Added missing logging statement when kfifo_alloc fails, to improve
> > > debugging.
> > > 
> > > Signed-off-by: Keyur Patel <iamkeyur96@gmail.com>
> > > ---
> > >  drivers/staging/greybus/uart.c | 4 +++-
> > >  1 file changed, 3 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/drivers/staging/greybus/uart.c b/drivers/staging/greybus/uart.c
> > > index b3bffe91ae99..86a395ae177d 100644
> > > --- a/drivers/staging/greybus/uart.c
> > > +++ b/drivers/staging/greybus/uart.c
> > > @@ -856,8 +856,10 @@ static int gb_uart_probe(struct gbphy_device *gbphy_dev,
> > >  
> > >  	retval = kfifo_alloc(&gb_tty->write_fifo, GB_UART_WRITE_FIFO_SIZE,
> > >  			     GFP_KERNEL);
> > > -	if (retval)
> > > +	if (retval) {
> > > +		pr_err("kfifo_alloc failed\n");
> > >  		goto exit_buf_free;
> > > +	}
> > 
> > You should have already gotten an error message from the log if this
> > fails, from the kmalloc_array() call failing, right?
> > 
> > So why is this needed?  We have been trying to remove these types of
> > messages and keep them in the "root" place where the failure happens.
> > 
> > thanks,
> > 
> > greg k-h
> 
> Didn't notice that. I agree that this will result only into redundancy. 
> Quick look over files reveal that there are multiple places
> where people are using print statements after memory allocation fails. 
> Should I go ahead and send patches to remove those
> redundant print statements?

It all depends on where in the kernel those are.  Some subsystems want
minor cleanups like this, but most do not.  So unless the issue you find
is in the drivers/staging/ directory, I would not worry about it.

thanks,

greg k-h

Re: [PATCH] staging: greybus: add logging statement when kfifo_alloc fails

[Greg Kroah-Hartman]

On Wed, Jul 10, 2019 at 10:24:06AM -0400, Keyur Patel wrote:
> On Wed, Jul 10, 2019 at 06:35:38PM +0200, Greg Kroah-Hartman wrote:
> > On Wed, Jul 10, 2019 at 08:20:17AM -0400, Keyur Patel wrote:
> > > Added missing logging statement when kfifo_alloc fails, to improve
> > > debugging.
> > > 
> > > Signed-off-by: Keyur Patel <iamkeyur96@gmail.com>
> > > ---
> > >  drivers/staging/greybus/uart.c | 4 +++-
> > >  1 file changed, 3 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/drivers/staging/greybus/uart.c b/drivers/staging/greybus/uart.c
> > > index b3bffe91ae99..86a395ae177d 100644
> > > --- a/drivers/staging/greybus/uart.c
> > > +++ b/drivers/staging/greybus/uart.c
> > > @@ -856,8 +856,10 @@ static int gb_uart_probe(struct gbphy_device *gbphy_dev,
> > >  
> > >  	retval = kfifo_alloc(&gb_tty->write_fifo, GB_UART_WRITE_FIFO_SIZE,
> > >  			     GFP_KERNEL);
> > > -	if (retval)
> > > +	if (retval) {
> > > +		pr_err("kfifo_alloc failed\n");
> > >  		goto exit_buf_free;
> > > +	}
> > 
> > You should have already gotten an error message from the log if this
> > fails, from the kmalloc_array() call failing, right?
> > 
> > So why is this needed?  We have been trying to remove these types of
> > messages and keep them in the "root" place where the failure happens.
> > 
> > thanks,
> > 
> > greg k-h
> 
> Didn't notice that. I agree that this will result only into redundancy. 
> Quick look over files reveal that there are multiple places
> where people are using print statements after memory allocation fails. 
> Should I go ahead and send patches to remove those
> redundant print statements?

It all depends on where in the kernel those are.  Some subsystems want
minor cleanups like this, but most do not.  So unless the issue you find
is in the drivers/staging/ directory, I would not worry about it.

thanks,

greg k-h
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel