* [PATCH 2/2] ASoC: rt1011: Add R0 temperature and TDM1 ADC2DAT Swap control
@ 2019-07-11 8:22 shumingf
0 siblings, 0 replies; only message in thread
From: shumingf @ 2019-07-11 8:22 UTC (permalink / raw)
To: broonie, lgirdwood
Cc: oder_chiou, jack.yu, alsa-devel, lars, Shuming Fan, derek.fang,
sathya.prakash.m.r, naveen.m, mingjane_hsieh, flove
From: Shuming Fan <shumingf@realtek.com>
- The user level application could set the R0 temperature after booting system.
The degree Celsius of R0 temperature store in the non-volatile space
when doing R0 calibration.
- TDM1 ADC2DAT Swap controls use to control TDM slot2/3 data
Signed-off-by: Shuming Fan <shumingf@realtek.com>
---
sound/soc/codecs/rt1011.c | 9 ++++++++-
sound/soc/codecs/rt1011.h | 1 +
2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/rt1011.c b/sound/soc/codecs/rt1011.c
index 0a6ff13d76e1..b25b4c1127ca 100644
--- a/sound/soc/codecs/rt1011.c
+++ b/sound/soc/codecs/rt1011.c
@@ -1029,6 +1029,8 @@ static const char * const rt1011_tdm_adc_swap_select[] = {
static SOC_ENUM_SINGLE_DECL(rt1011_tdm_adc1_1_enum, RT1011_TDM1_SET_3, 6,
rt1011_tdm_adc_swap_select);
+static SOC_ENUM_SINGLE_DECL(rt1011_tdm_adc2_1_enum, RT1011_TDM1_SET_3, 4,
+ rt1011_tdm_adc_swap_select);
static void rt1011_reset(struct regmap *regmap)
{
@@ -1333,7 +1335,8 @@ static const struct snd_kcontrol_new rt1011_snd_controls[] = {
/* TDM1 Data Out Selection */
SOC_ENUM("TDM1 DOUT Source", rt1011_tdm1_adc1_dat_enum),
SOC_ENUM("TDM1 DOUT Location", rt1011_tdm1_adc1_loc_enum),
- SOC_ENUM("TDM1 ADCDAT Swap Select", rt1011_tdm_adc1_1_enum),
+ SOC_ENUM("TDM1 ADC1DAT Swap Select", rt1011_tdm_adc1_1_enum),
+ SOC_ENUM("TDM1 ADC2DAT Swap Select", rt1011_tdm_adc2_1_enum),
/* Data Out Mode */
SOC_ENUM("I2S ADC DOUT Mode", rt1011_adc_dout_mode_enum),
@@ -1355,6 +1358,10 @@ static const struct snd_kcontrol_new rt1011_snd_controls[] = {
SOC_SINGLE_EXT("R0 Calibration", SND_SOC_NOPM, 0, 1, 0,
rt1011_r0_cali_get, rt1011_r0_cali_put),
RT1011_R0_LOAD("R0 Load Mode"),
+
+ /* R0 temperature */
+ SOC_SINGLE("R0 Temperature", RT1011_STP_INITIAL_RESISTANCE_TEMP,
+ 2, 255, 0),
};
static int rt1011_is_sys_clk_from_pll(struct snd_soc_dapm_widget *source,
diff --git a/sound/soc/codecs/rt1011.h b/sound/soc/codecs/rt1011.h
index 98a38800c4df..5d431d7f1d16 100644
--- a/sound/soc/codecs/rt1011.h
+++ b/sound/soc/codecs/rt1011.h
@@ -227,6 +227,7 @@
#define RT1011_STP_CALIB_RS_TEMP 0x152a
#define RT1011_INIT_RECIPROCAL_REG_24_16 0x1538
#define RT1011_INIT_RECIPROCAL_REG_15_0 0x1539
+#define RT1011_STP_INITIAL_RESISTANCE_TEMP 0x153c
#define RT1011_STP_ALPHA_RECIPROCAL_MSB 0x153e
#define RT1011_SPK_RESISTANCE_1 0x1544
#define RT1011_SPK_RESISTANCE_2 0x1546
--
2.22.0
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2019-07-11 8:22 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-11 8:22 [PATCH 2/2] ASoC: rt1011: Add R0 temperature and TDM1 ADC2DAT Swap control shumingf
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.