From: Olivier Matz <olivier.matz@6wind.com>
To: dev@dpdk.org
Cc: Thomas Monjalon <thomas@monjalon.net>,
David Marchand <david.marchand@redhat.com>,
Bruce Richardson <bruce.richardson@intel.com>,
Musatescu@6wind.com, Flavia <flavia.musatescu@intel.com>
Subject: [dpdk-dev] [PATCH v3] devtools: better freebsd support
Date: Thu, 11 Jul 2019 16:25:30 +0200 [thread overview]
Message-ID: <20190711142530.1891-1-olivier.matz@6wind.com> (raw)
In-Reply-To: <20190705135822.1797-1-olivier.matz@6wind.com>
- As "readlink -e" and "readlink -m" do not exist on freebsd,
use "readlink -f", it should not have any impact in these cases.
- "sed -ri" is invalid on freebsd and should be replaced by
"sed -ri=''"
- Use gmake instead of make.
This fixes the following command:
SYSDIR=/usr/src/sys ./devtools/test-build.sh \
-j4 x86_64-native-freebsd-gcc
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
---
v3:
- fix examples installation path, pointed-out by Flavia
v2:
- remove sed_ri() function and use 'sed -ri=""' as suggested by Bruce
devtools/check-dup-includes.sh | 2 +-
devtools/checkpatches.sh | 8 ++--
devtools/get-maintainer.sh | 2 +-
devtools/load-devel-config | 4 +-
devtools/test-build.sh | 94 ++++++++++++++++++++++--------------------
devtools/validate-abi.sh | 2 +-
6 files changed, 58 insertions(+), 54 deletions(-)
diff --git a/devtools/check-dup-includes.sh b/devtools/check-dup-includes.sh
index e4c2748c6..591599949 100755
--- a/devtools/check-dup-includes.sh
+++ b/devtools/check-dup-includes.sh
@@ -5,7 +5,7 @@
# Check C files in git repository for duplicated includes.
# Usage: devtools/check-dup-includes.sh [directory]
-dir=${1:-$(dirname $(readlink -m $0))/..}
+dir=${1:-$(dirname $(readlink -f $0))/..}
cd $dir
# speed up by ignoring Unicode details
diff --git a/devtools/checkpatches.sh b/devtools/checkpatches.sh
index 560e6ce93..8e2beee16 100755
--- a/devtools/checkpatches.sh
+++ b/devtools/checkpatches.sh
@@ -7,9 +7,9 @@
# - DPDK_CHECKPATCH_CODESPELL
# - DPDK_CHECKPATCH_LINE_LENGTH
# - DPDK_CHECKPATCH_OPTIONS
-. $(dirname $(readlink -e $0))/load-devel-config
+. $(dirname $(readlink -f $0))/load-devel-config
-VALIDATE_NEW_API=$(dirname $(readlink -e $0))/check-symbol-change.sh
+VALIDATE_NEW_API=$(dirname $(readlink -f $0))/check-symbol-change.sh
# Enable codespell by default. This can be overwritten from a config file.
# Codespell can also be enabled by setting DPDK_CHECKPATCH_CODESPELL to a valid path
@@ -66,7 +66,7 @@ check_forbidden_additions() { # <patch>
-v EXPRESSIONS="rte_panic\\\( rte_exit\\\(" \
-v RET_ON_FAIL=1 \
-v MESSAGE='Using rte_panic/rte_exit' \
- -f $(dirname $(readlink -e $0))/check-forbidden-tokens.awk \
+ -f $(dirname $(readlink -f $0))/check-forbidden-tokens.awk \
"$1" || res=1
# svg figures must be included with wildcard extension
@@ -75,7 +75,7 @@ check_forbidden_additions() { # <patch>
-v EXPRESSIONS='::[[:space:]]*[^[:space:]]*\\.svg' \
-v RET_ON_FAIL=1 \
-v MESSAGE='Using explicit .svg extension instead of .*' \
- -f $(dirname $(readlink -e $0))/check-forbidden-tokens.awk \
+ -f $(dirname $(readlink -f $0))/check-forbidden-tokens.awk \
"$1" || res=1
return $res
diff --git a/devtools/get-maintainer.sh b/devtools/get-maintainer.sh
index b9160486a..85740f5af 100755
--- a/devtools/get-maintainer.sh
+++ b/devtools/get-maintainer.sh
@@ -5,7 +5,7 @@
# Load config options:
# - DPDK_GETMAINTAINER_PATH
-. $(dirname $(readlink -e $0))/load-devel-config
+. $(dirname $(readlink -f $0))/load-devel-config
options="--no-git-fallback"
options="$options --no-rolestats"
diff --git a/devtools/load-devel-config b/devtools/load-devel-config
index 4f43cb352..380c79db4 100644
--- a/devtools/load-devel-config
+++ b/devtools/load-devel-config
@@ -6,7 +6,7 @@ test ! -r /etc/dpdk/devel.config ||
test ! -r ~/.config/dpdk/devel.config ||
. ~/.config/dpdk/devel.config
# from local file
-test ! -r $(dirname $(readlink -m $0))/../.develconfig ||
- . $(dirname $(readlink -m $0))/../.develconfig
+test ! -r $(dirname $(readlink -f $0))/../.develconfig ||
+ . $(dirname $(readlink -f $0))/../.develconfig
# The config files must export variables in the shell style
diff --git a/devtools/test-build.sh b/devtools/test-build.sh
index 9b50bf73d..3c029ce31 100755
--- a/devtools/test-build.sh
+++ b/devtools/test-build.sh
@@ -28,7 +28,7 @@ default_path=$PATH
# - LIBSSO_SNOW3G_PATH
# - LIBSSO_KASUMI_PATH
# - LIBSSO_ZUC_PATH
-. $(dirname $(readlink -e $0))/load-devel-config
+. $(dirname $(readlink -f $0))/load-devel-config
print_usage () {
echo "usage: $(basename $0) [-h] [-jX] [-s] [config1 [config2] ...]]"
@@ -57,6 +57,10 @@ print_help () {
END_OF_HELP
}
+[ -z $MAKE ] && command -v gmake > /dev/null && MAKE=gmake
+[ -z $MAKE ] && command -v make > /dev/null && MAKE=make
+[ -z $MAKE ] && echo "Cannot find make or gmake" && exit 1
+
J=$DPDK_MAKE_JOBS
short=false
unset verbose
@@ -90,7 +94,7 @@ trap "signal=INT ; trap - INT ; kill -INT $$" INT
# notify result on exit
trap on_exit EXIT
-cd $(dirname $(readlink -m $0))/..
+cd $(dirname $(readlink -f $0))/..
reset_env ()
{
@@ -127,83 +131,83 @@ config () # <directory> <target> <options>
fi
if [ ! -e $1/.config ] || $reconfig ; then
echo "================== Configure $1"
- make T=$2 O=$1 config
+ ${MAKE} T=$2 O=$1 config
echo 'Customize configuration'
# Built-in options (lowercase)
! echo $3 | grep -q '+default' || \
- sed -ri 's,(RTE_MACHINE=")native,\1default,' $1/.config
+ sed -ri="" 's,(RTE_MACHINE=")native,\1default,' $1/.config
echo $3 | grep -q '+next' || \
- sed -ri 's,(NEXT_ABI=)y,\1n,' $1/.config
+ sed -ri="" 's,(NEXT_ABI=)y,\1n,' $1/.config
! echo $3 | grep -q '+shared' || \
- sed -ri 's,(SHARED_LIB=)n,\1y,' $1/.config
+ sed -ri="" 's,(SHARED_LIB=)n,\1y,' $1/.config
! echo $3 | grep -q '+debug' || ( \
- sed -ri 's,(RTE_LOG_DP_LEVEL=).*,\1RTE_LOG_DEBUG,' $1/.config
- sed -ri 's,(_DEBUG.*=)n,\1y,' $1/.config
- sed -ri 's,(_STAT.*=)n,\1y,' $1/.config
- sed -ri 's,(TEST_PMD_RECORD_.*=)n,\1y,' $1/.config )
+ sed -ri="" 's,(RTE_LOG_DP_LEVEL=).*,\1RTE_LOG_DEBUG,' $1/.config
+ sed -ri="" 's,(_DEBUG.*=)n,\1y,' $1/.config
+ sed -ri="" 's,(_STAT.*=)n,\1y,' $1/.config
+ sed -ri="" 's,(TEST_PMD_RECORD_.*=)n,\1y,' $1/.config )
# Automatic configuration
test "$DPDK_DEP_NUMA" != n || \
- sed -ri 's,(NUMA.*=)y,\1n,' $1/.config
- sed -ri 's,(LIBRTE_IEEE1588=)n,\1y,' $1/.config
- sed -ri 's,(BYPASS=)n,\1y,' $1/.config
+ sed -ri="" 's,(NUMA.*=)y,\1n,' $1/.config
+ sed -ri="" 's,(LIBRTE_IEEE1588=)n,\1y,' $1/.config
+ sed -ri="" 's,(BYPASS=)n,\1y,' $1/.config
test "$DPDK_DEP_ARCHIVE" != y || \
- sed -ri 's,(RESOURCE_TAR=)n,\1y,' $1/.config
+ sed -ri="" 's,(RESOURCE_TAR=)n,\1y,' $1/.config
test "$DPDK_DEP_ISAL" != y || \
- sed -ri 's,(PMD_ISAL=)n,\1y,' $1/.config
+ sed -ri="" 's,(PMD_ISAL=)n,\1y,' $1/.config
test "$DPDK_DEP_MLX" != y || \
- sed -ri 's,(MLX._PMD=)n,\1y,' $1/.config
+ sed -ri="" 's,(MLX._PMD=)n,\1y,' $1/.config
test "$DPDK_DEP_SZE" != y || \
- sed -ri 's,(PMD_SZEDATA2=)n,\1y,' $1/.config
+ sed -ri="" 's,(PMD_SZEDATA2=)n,\1y,' $1/.config
test "$DPDK_DEP_ZLIB" != y || \
- sed -ri 's,(BNX2X_PMD=)n,\1y,' $1/.config
+ sed -ri="" 's,(BNX2X_PMD=)n,\1y,' $1/.config
test "$DPDK_DEP_ZLIB" != y || \
- sed -ri 's,(PMD_ZLIB=)n,\1y,' $1/.config
+ sed -ri="" 's,(PMD_ZLIB=)n,\1y,' $1/.config
test "$DPDK_DEP_ZLIB" != y || \
- sed -ri 's,(COMPRESSDEV_TEST=)n,\1y,' $1/.config
+ sed -ri="" 's,(COMPRESSDEV_TEST=)n,\1y,' $1/.config
test "$DPDK_DEP_PCAP" != y || \
- sed -ri 's,(PCAP=)n,\1y,' $1/.config
+ sed -ri="" 's,(PCAP=)n,\1y,' $1/.config
test -z "$ARMV8_CRYPTO_LIB_PATH" || \
- sed -ri 's,(PMD_ARMV8_CRYPTO=)n,\1y,' $1/.config
+ sed -ri="" 's,(PMD_ARMV8_CRYPTO=)n,\1y,' $1/.config
test "$DPDK_DEP_IPSEC_MB" != y || \
- sed -ri 's,(PMD_AESNI_MB=)n,\1y,' $1/.config
+ sed -ri="" 's,(PMD_AESNI_MB=)n,\1y,' $1/.config
test "$DPDK_DEP_IPSEC_MB" != y || \
- sed -ri 's,(PMD_AESNI_GCM=)n,\1y,' $1/.config
+ sed -ri="" 's,(PMD_AESNI_GCM=)n,\1y,' $1/.config
test -z "$LIBSSO_SNOW3G_PATH" || \
- sed -ri 's,(PMD_SNOW3G=)n,\1y,' $1/.config
+ sed -ri="" 's,(PMD_SNOW3G=)n,\1y,' $1/.config
test -z "$LIBSSO_KASUMI_PATH" || \
- sed -ri 's,(PMD_KASUMI=)n,\1y,' $1/.config
+ sed -ri="" 's,(PMD_KASUMI=)n,\1y,' $1/.config
test -z "$LIBSSO_ZUC_PATH" || \
- sed -ri 's,(PMD_ZUC=)n,\1y,' $1/.config
+ sed -ri="" 's,(PMD_ZUC=)n,\1y,' $1/.config
test "$DPDK_DEP_SSL" != y || \
- sed -ri 's,(PMD_CCP=)n,\1y,' $1/.config
+ sed -ri="" 's,(PMD_CCP=)n,\1y,' $1/.config
test "$DPDK_DEP_SSL" != y || \
- sed -ri 's,(PMD_OPENSSL=)n,\1y,' $1/.config
+ sed -ri="" 's,(PMD_OPENSSL=)n,\1y,' $1/.config
test "$DPDK_DEP_SSL" != y || \
- sed -ri 's,(QAT_SYM=)n,\1y,' $1/.config
+ sed -ri="" 's,(QAT_SYM=)n,\1y,' $1/.config
test -z "$FLEXRAN_SDK" || \
- sed -ri 's,(BBDEV_TURBO_SW=)n,\1y,' $1/.config
- sed -ri 's,(SCHED_.*=)n,\1y,' $1/.config
+ sed -ri="" 's,(BBDEV_TURBO_SW=)n,\1y,' $1/.config
+ sed -ri="" 's,(SCHED_.*=)n,\1y,' $1/.config
test -z "$LIBMUSDK_PATH" || \
- sed -ri 's,(PMD_MVSAM_CRYPTO=)n,\1y,' $1/.config
+ sed -ri="" 's,(PMD_MVSAM_CRYPTO=)n,\1y,' $1/.config
test -z "$LIBMUSDK_PATH" || \
- sed -ri 's,(MVPP2_PMD=)n,\1y,' $1/.config
+ sed -ri="" 's,(MVPP2_PMD=)n,\1y,' $1/.config
test -z "$LIBMUSDK_PATH" || \
- sed -ri 's,(MVNETA_PMD=)n,\1y,' $1/.config
+ sed -ri="" 's,(MVNETA_PMD=)n,\1y,' $1/.config
test "$DPDK_DEP_ELF" != y || \
- sed -ri 's,(BPF_ELF=)n,\1y,' $1/.config
+ sed -ri="" 's,(BPF_ELF=)n,\1y,' $1/.config
test "$DPDK_DEP_JSON" != y || \
- sed -ri 's,(TELEMETRY=)n,\1y,' $1/.config
+ sed -ri="" 's,(TELEMETRY=)n,\1y,' $1/.config
build_config_hook $1 $2 $3
# Explicit enabler/disabler (uppercase)
for option in $(echo $3 | sed 's,[~+], &,g') ; do
pattern=$(echo $option | cut -c2-)
if echo $option | grep -q '^~' ; then
- sed -ri "s,($pattern=)y,\1n," $1/.config
+ sed -ri="" "s,($pattern=)y,\1n," $1/.config
elif echo $option | grep -q '^+' ; then
- sed -ri "s,($pattern=)n,\1y," $1/.config
+ sed -ri="" "s,($pattern=)n,\1y," $1/.config
fi
done
fi
@@ -220,22 +224,22 @@ for conf in $configs ; do
# reload config with DPDK_TARGET set
DPDK_TARGET=$target
reset_env
- . $(dirname $(readlink -e $0))/load-devel-config
+ . $(dirname $(readlink -f $0))/load-devel-config
options=$(echo $conf | sed 's,[^~+]*,,')
dir=$conf
config $dir $target $options
echo "================== Build $dir"
- make -j$J EXTRA_CFLAGS="$maxerr $DPDK_DEP_CFLAGS" \
+ ${MAKE} -j$J EXTRA_CFLAGS="$maxerr $DPDK_DEP_CFLAGS" \
EXTRA_LDFLAGS="$DPDK_DEP_LDFLAGS" $verbose O=$dir
! $short || break
echo "================== Build examples for $dir"
export RTE_SDK=$(pwd)
export RTE_TARGET=$dir
- make -j$J -sC examples \
+ ${MAKE} -j$J -sC examples \
EXTRA_LDFLAGS="$DPDK_DEP_LDFLAGS" $verbose \
- O=$(readlink -m $dir/examples)
+ O=$(readlink -f $dir)/examples
unset RTE_TARGET
echo "################## $dir done."
unset dir
@@ -244,9 +248,9 @@ done
if ! $short ; then
mkdir -p .check
echo "================== Build doxygen HTML API"
- make doc-api-html >/dev/null 2>.check/doc.txt
+ ${MAKE} doc-api-html >/dev/null 2>.check/doc.txt
echo "================== Build sphinx HTML guides"
- make doc-guides-html >/dev/null 2>>.check/doc.txt
+ ${MAKE} doc-guides-html >/dev/null 2>>.check/doc.txt
echo "================== Check docs"
diff -u /dev/null .check/doc.txt
fi
diff --git a/devtools/validate-abi.sh b/devtools/validate-abi.sh
index 138436d93..f64e19d38 100755
--- a/devtools/validate-abi.sh
+++ b/devtools/validate-abi.sh
@@ -181,7 +181,7 @@ case "${dst}" in
/*) ;;
*) dst=${PWD}/${dst} ;;
esac
-dpdkroot=$(readlink -e $(dirname $0)/..)
+dpdkroot=$(readlink -f $(dirname $0)/..)
if [ -e "${dst}" -a "$force" = 0 ]; then
echo "The ${dst} directory is not empty. Remove it, use another"
--
2.11.0
next prev parent reply other threads:[~2019-07-11 14:25 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-23 7:43 [dpdk-dev] [PATCH] devtools: better freebsd support Olivier Matz
2019-05-23 10:47 ` Bruce Richardson
2019-05-23 10:58 ` David Marchand
2019-07-05 13:58 ` [dpdk-dev] [PATCH v2] " Olivier Matz
2019-07-08 16:35 ` Thomas Monjalon
2019-07-11 13:06 ` Olivier Matz
2019-07-09 11:05 ` Musatescu, Flavia
2019-07-11 14:18 ` Olivier Matz
2019-07-11 14:25 ` Olivier Matz [this message]
2019-07-29 8:31 ` [dpdk-dev] [PATCH v3] " David Marchand
2019-07-29 8:36 ` David Marchand
2019-07-30 22:00 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190711142530.1891-1-olivier.matz@6wind.com \
--to=olivier.matz@6wind.com \
--cc=Musatescu@6wind.com \
--cc=bruce.richardson@intel.com \
--cc=david.marchand@redhat.com \
--cc=dev@dpdk.org \
--cc=flavia.musatescu@intel.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.