From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> To: shawnguo@kernel.org, s.hauer@pengutronix.de, robh+dt@kernel.org Cc: kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Darshak.Patel@einfochips.com, kinjan.patel@einfochips.com, prajose.john@einfochips.com, Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Subject: [PATCH 3/3] arm64: dts: freescale: Add support for i.MX8QXP AI_ML board Date: Wed, 17 Jul 2019 11:40:39 +0530 [thread overview] Message-ID: <20190717061039.9271-4-manivannan.sadhasivam@linaro.org> (raw) In-Reply-To: <20190717061039.9271-1-manivannan.sadhasivam@linaro.org> Add support for i.MX8QXP AI_ML board from Einfochips. This board is one of the Consumer Edition boards of the 96Boards family based on i.MX8QXP SoC from NXP/Freescale. The initial support includes following peripherals which are tested and known to be working: 1. Debug serial via UART2 2. uSD 3. WiFi 4. Ethernet More information about this board can be found in Arrow website: https://www.arrow.com/en/products/imx8-ai-ml/arrow-development-tools Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- arch/arm64/boot/dts/freescale/Makefile | 1 + .../boot/dts/freescale/imx8qxp-ai_ml.dts | 249 ++++++++++++++++++ 2 files changed, 250 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 0bd122f60549..bd8460549d1a 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -24,4 +24,5 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts new file mode 100644 index 000000000000..dcd36e57d916 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts @@ -0,0 +1,249 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 Einfochips + * Copyright 2019 Linaro Ltd. + */ + +/dts-v1/; + +#include "imx8qxp.dtsi" + +/ { + model = "Einfochips i.MX8QXP AI_ML"; + compatible = "einfochips,imx8qxp-ai_ml", "fsl,imx8qxp"; + + aliases { + serial1 = &adma_lpuart1; + serial2 = &adma_lpuart2; + serial3 = &adma_lpuart3; + }; + + chosen { + stdout-path = &adma_lpuart2; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x80000000>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + user_led1 { + label = "green:user1"; + gpios = <&lsio_gpio4 16 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + user_led2 { + label = "green:user2"; + gpios = <&lsio_gpio0 6 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + }; + + user_led3 { + label = "green:user3"; + gpios = <&lsio_gpio0 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + user_led4 { + label = "green:user4"; + gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>; + panic-indicator; + linux,default-trigger = "none"; + }; + + wlan_active_led { + label = "yellow:wlan"; + gpios = <&lsio_gpio4 17 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + bt_active_led { + label = "blue:bt"; + gpios = <&lsio_gpio4 18 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "hci0-power"; + default-state = "off"; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_reg_on>; + reset-gpios = <&lsio_gpio3 24 GPIO_ACTIVE_LOW>; + }; +}; + +/* BT */ +&adma_lpuart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; + uart-has-rtscts; + status = "okay"; +}; + +/* LS-I2C0 */ +&adma_lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart1>; + status = "okay"; +}; + +/* Debug */ +&adma_lpuart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart2>; + status = "okay"; +}; + +/* PCI-E */ +&adma_lpuart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart3>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; +}; + +/* WiFi */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <4>; + no-sd; + non-removable; + mmc-pwrseq = <&sdio_pwrseq>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD */ +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + IMX8QXP_ENET0_MDC_CONN_ENET0_MDC 0x06000020 + IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 + IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x06000020 + IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x06000020 + IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x06000020 + IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x06000020 + IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x06000020 + IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x06000020 + IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x06000020 + IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x06000020 + IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x06000020 + IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x06000020 + IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x06000020 + IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020 + >; + }; + + pinctrl_leds: ledsgrp{ + fsl,pins = < + IMX8QXP_ESAI0_TX2_RX3_LSIO_GPIO0_IO06 0x00000021 + IMX8QXP_ESAI0_TX3_RX2_LSIO_GPIO0_IO07 0x00000021 + IMX8QXP_EMMC0_DATA7_LSIO_GPIO4_IO16 0x00000021 + IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21 0x00000021 + IMX8QXP_EMMC0_STROBE_LSIO_GPIO4_IO17 0x00000021 + IMX8QXP_EMMC0_RESET_B_LSIO_GPIO4_IO18 0x00000021 + >; + }; + + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + IMX8QXP_UART0_RX_ADMA_UART0_RX 0X06000020 + IMX8QXP_UART0_TX_ADMA_UART0_TX 0X06000020 + IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B 0x06000020 + IMX8QXP_FLEXCAN0_RX_ADMA_UART0_RTS_B 0x06000020 + >; + }; + + pinctrl_lpuart1: lpuart1grp { + fsl,pins = < + IMX8QXP_UART1_RX_ADMA_UART1_RX 0X06000020 + IMX8QXP_UART1_TX_ADMA_UART1_TX 0X06000020 + >; + }; + + pinctrl_lpuart2: lpuart2grp { + fsl,pins = < + IMX8QXP_UART2_RX_ADMA_UART2_RX 0X06000020 + IMX8QXP_UART2_TX_ADMA_UART2_TX 0X06000020 + >; + }; + + pinctrl_lpuart3: lpuart3grp { + fsl,pins = < + IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX 0X06000020 + IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX 0X06000020 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 + IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 + IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 + IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 + IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 + IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021 + IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021 + IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021 + IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021 + IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021 + IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021 + IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22 0x00000021 + >; + }; + + pinctrl_wifi_reg_on: wifiregongrp { + fsl,pins = < + IMX8QXP_QSPI0B_SS1_B_LSIO_GPIO3_IO24 0x00000021 + >; + }; +}; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> To: shawnguo@kernel.org, s.hauer@pengutronix.de, robh+dt@kernel.org Cc: devicetree@vger.kernel.org, kinjan.patel@einfochips.com, linux-kernel@vger.kernel.org, Darshak.Patel@einfochips.com, linux-imx@nxp.com, kernel@pengutronix.de, Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>, festevam@gmail.com, linux-arm-kernel@lists.infradead.org, prajose.john@einfochips.com Subject: [PATCH 3/3] arm64: dts: freescale: Add support for i.MX8QXP AI_ML board Date: Wed, 17 Jul 2019 11:40:39 +0530 [thread overview] Message-ID: <20190717061039.9271-4-manivannan.sadhasivam@linaro.org> (raw) In-Reply-To: <20190717061039.9271-1-manivannan.sadhasivam@linaro.org> Add support for i.MX8QXP AI_ML board from Einfochips. This board is one of the Consumer Edition boards of the 96Boards family based on i.MX8QXP SoC from NXP/Freescale. The initial support includes following peripherals which are tested and known to be working: 1. Debug serial via UART2 2. uSD 3. WiFi 4. Ethernet More information about this board can be found in Arrow website: https://www.arrow.com/en/products/imx8-ai-ml/arrow-development-tools Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- arch/arm64/boot/dts/freescale/Makefile | 1 + .../boot/dts/freescale/imx8qxp-ai_ml.dts | 249 ++++++++++++++++++ 2 files changed, 250 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 0bd122f60549..bd8460549d1a 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -24,4 +24,5 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts new file mode 100644 index 000000000000..dcd36e57d916 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts @@ -0,0 +1,249 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 Einfochips + * Copyright 2019 Linaro Ltd. + */ + +/dts-v1/; + +#include "imx8qxp.dtsi" + +/ { + model = "Einfochips i.MX8QXP AI_ML"; + compatible = "einfochips,imx8qxp-ai_ml", "fsl,imx8qxp"; + + aliases { + serial1 = &adma_lpuart1; + serial2 = &adma_lpuart2; + serial3 = &adma_lpuart3; + }; + + chosen { + stdout-path = &adma_lpuart2; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x80000000>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + user_led1 { + label = "green:user1"; + gpios = <&lsio_gpio4 16 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + user_led2 { + label = "green:user2"; + gpios = <&lsio_gpio0 6 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + }; + + user_led3 { + label = "green:user3"; + gpios = <&lsio_gpio0 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + user_led4 { + label = "green:user4"; + gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>; + panic-indicator; + linux,default-trigger = "none"; + }; + + wlan_active_led { + label = "yellow:wlan"; + gpios = <&lsio_gpio4 17 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + bt_active_led { + label = "blue:bt"; + gpios = <&lsio_gpio4 18 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "hci0-power"; + default-state = "off"; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_reg_on>; + reset-gpios = <&lsio_gpio3 24 GPIO_ACTIVE_LOW>; + }; +}; + +/* BT */ +&adma_lpuart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; + uart-has-rtscts; + status = "okay"; +}; + +/* LS-I2C0 */ +&adma_lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart1>; + status = "okay"; +}; + +/* Debug */ +&adma_lpuart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart2>; + status = "okay"; +}; + +/* PCI-E */ +&adma_lpuart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart3>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; +}; + +/* WiFi */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <4>; + no-sd; + non-removable; + mmc-pwrseq = <&sdio_pwrseq>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD */ +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + IMX8QXP_ENET0_MDC_CONN_ENET0_MDC 0x06000020 + IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 + IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x06000020 + IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x06000020 + IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x06000020 + IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x06000020 + IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x06000020 + IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x06000020 + IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x06000020 + IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x06000020 + IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x06000020 + IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x06000020 + IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x06000020 + IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020 + >; + }; + + pinctrl_leds: ledsgrp{ + fsl,pins = < + IMX8QXP_ESAI0_TX2_RX3_LSIO_GPIO0_IO06 0x00000021 + IMX8QXP_ESAI0_TX3_RX2_LSIO_GPIO0_IO07 0x00000021 + IMX8QXP_EMMC0_DATA7_LSIO_GPIO4_IO16 0x00000021 + IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21 0x00000021 + IMX8QXP_EMMC0_STROBE_LSIO_GPIO4_IO17 0x00000021 + IMX8QXP_EMMC0_RESET_B_LSIO_GPIO4_IO18 0x00000021 + >; + }; + + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + IMX8QXP_UART0_RX_ADMA_UART0_RX 0X06000020 + IMX8QXP_UART0_TX_ADMA_UART0_TX 0X06000020 + IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B 0x06000020 + IMX8QXP_FLEXCAN0_RX_ADMA_UART0_RTS_B 0x06000020 + >; + }; + + pinctrl_lpuart1: lpuart1grp { + fsl,pins = < + IMX8QXP_UART1_RX_ADMA_UART1_RX 0X06000020 + IMX8QXP_UART1_TX_ADMA_UART1_TX 0X06000020 + >; + }; + + pinctrl_lpuart2: lpuart2grp { + fsl,pins = < + IMX8QXP_UART2_RX_ADMA_UART2_RX 0X06000020 + IMX8QXP_UART2_TX_ADMA_UART2_TX 0X06000020 + >; + }; + + pinctrl_lpuart3: lpuart3grp { + fsl,pins = < + IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX 0X06000020 + IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX 0X06000020 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 + IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 + IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 + IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 + IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 + IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021 + IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021 + IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021 + IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021 + IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021 + IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021 + IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22 0x00000021 + >; + }; + + pinctrl_wifi_reg_on: wifiregongrp { + fsl,pins = < + IMX8QXP_QSPI0B_SS1_B_LSIO_GPIO3_IO24 0x00000021 + >; + }; +}; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-07-17 6:11 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-07-17 6:10 [PATCH 0/3] Add support for i.MXQXP AI_ML board Manivannan Sadhasivam 2019-07-17 6:10 ` Manivannan Sadhasivam 2019-07-17 6:10 ` Manivannan Sadhasivam 2019-07-17 6:10 ` [PATCH 1/3] dt-bindings: Add Vendor prefix for Einfochips Manivannan Sadhasivam 2019-07-17 6:10 ` Manivannan Sadhasivam 2019-07-17 10:26 ` Aisheng Dong 2019-07-17 10:26 ` Aisheng Dong 2019-07-17 10:26 ` Aisheng Dong 2019-07-17 6:10 ` [PATCH 2/3] dt-bindings: arm: Document i.MX8QXP AI_ML board binding Manivannan Sadhasivam 2019-07-17 6:10 ` Manivannan Sadhasivam 2019-07-17 10:28 ` Aisheng Dong 2019-07-17 10:28 ` Aisheng Dong 2019-07-17 10:28 ` Aisheng Dong 2019-07-17 6:10 ` Manivannan Sadhasivam [this message] 2019-07-17 6:10 ` [PATCH 3/3] arm64: dts: freescale: Add support for i.MX8QXP AI_ML board Manivannan Sadhasivam 2019-07-17 10:40 ` Aisheng Dong 2019-07-17 10:40 ` Aisheng Dong 2019-07-17 10:40 ` Aisheng Dong 2019-07-17 11:34 ` Manivannan Sadhasivam 2019-07-17 11:34 ` Manivannan Sadhasivam 2019-07-17 11:34 ` Manivannan Sadhasivam 2019-07-18 3:03 ` Aisheng Dong 2019-07-18 3:03 ` Aisheng Dong 2019-07-18 3:03 ` Aisheng Dong
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190717061039.9271-4-manivannan.sadhasivam@linaro.org \ --to=manivannan.sadhasivam@linaro.org \ --cc=Darshak.Patel@einfochips.com \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=kinjan.patel@einfochips.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=prajose.john@einfochips.com \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.