* [U-Boot] [PATCH v2 0/2] arm: qemu: fix failure if booting from TF-A
@ 2019-07-03 1:44 AKASHI Takahiro
2019-07-03 1:44 ` [U-Boot] [PATCH v2 1/2] arm: move CONFIG_TFABOOT to generic Kconfig AKASHI Takahiro
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: AKASHI Takahiro @ 2019-07-03 1:44 UTC (permalink / raw)
To: u-boot
With this patch, hang-up of U-Boot, as described in patch#2, will be fixed
if it is loaded and started from TF-A.
Changes in v2 (July 3, 2019)
* add patch#1 (preparatory patch)
* remove a reference to unnecessary patch in the commit message
AKASHI Takahiro (2):
arm: move CONFIG_TFABOOT to generic Kconfig
arm: qemu: fix failure in flash initialization if booting from TF-A
arch/arm/Kconfig | 29 +++++++++++++++++++++++
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 7 ------
include/configs/qemu-arm.h | 5 ++++
3 files changed, 34 insertions(+), 7 deletions(-)
--
2.21.0
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH v2 1/2] arm: move CONFIG_TFABOOT to generic Kconfig
2019-07-03 1:44 [U-Boot] [PATCH v2 0/2] arm: qemu: fix failure if booting from TF-A AKASHI Takahiro
@ 2019-07-03 1:44 ` AKASHI Takahiro
2019-07-18 23:57 ` Tom Rini
2019-07-03 1:44 ` [U-Boot] [PATCH v2 2/2] arm: qemu: fix failure in flash initialization if booting from TF-A AKASHI Takahiro
2019-07-16 2:50 ` [U-Boot] [PATCH v2 0/2] arm: qemu: fix failure " AKASHI Takahiro
2 siblings, 1 reply; 6+ messages in thread
From: AKASHI Takahiro @ 2019-07-03 1:44 UTC (permalink / raw)
To: u-boot
Currently, CONFIG_TFABOOT is located in armv8/fsl-layerscape Kconfig,
but it will be also useful for other targets if some additional
configuration are necessary.
So move it to arch/arm/Kconfig.
Please note that CONFIG_TFABOOT still depends on
CONFIG_ARCH_SUPPORT_TFABOOT and so the menu won't come up
if any target doesn't need its own customization for TF-A boot.
This will maintain the compatibility.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Sriram Dash <sriram.dash@nxp.com>
Cc: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Cc: Peng Ma <peng.ma@nxp.com>
Cc: Yuantian Tang <andy.tang@nxp.com>
Cc: Pankit Garg <pankit.garg@nxp.com>
---
arch/arm/Kconfig | 28 +++++++++++++++++++++++
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 7 ------
2 files changed, 28 insertions(+), 7 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 01ff57cf1bec..fe174d02d75a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1089,6 +1089,7 @@ config TARGET_LS1088AQDS
select ARCH_MISC_INIT
select ARM64
select ARMV8_MULTIENTRY
+ select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
select SUPPORT_SPL
select FSL_DDR_INTERACTIVE if !SD_BOOT
@@ -1104,6 +1105,7 @@ config TARGET_LS2080AQDS
select ARCH_MISC_INIT
select ARM64
select ARMV8_MULTIENTRY
+ select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
select SUPPORT_SPL
imply SCSI
@@ -1122,6 +1124,7 @@ config TARGET_LS2080ARDB
select ARCH_MISC_INIT
select ARM64
select ARMV8_MULTIENTRY
+ select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
select SUPPORT_SPL
select FSL_DDR_BIST
@@ -1154,6 +1157,7 @@ config TARGET_LX2160ARDB
select ARCH_MISC_INIT
select ARM64
select ARMV8_MULTIENTRY
+ select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
help
Support for NXP LX2160ARDB platform.
@@ -1167,6 +1171,7 @@ config TARGET_LX2160AQDS
select ARCH_MISC_INIT
select ARM64
select ARMV8_MULTIENTRY
+ select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
help
Support for NXP LX2160AQDS platform.
@@ -1207,6 +1212,7 @@ config TARGET_LS1012AQDS
bool "Support ls1012aqds"
select ARCH_LS1012A
select ARM64
+ select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
help
Support for Freescale LS1012AQDS platform.
@@ -1218,6 +1224,7 @@ config TARGET_LS1012ARDB
bool "Support ls1012ardb"
select ARCH_LS1012A
select ARM64
+ select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
imply SCSI
imply SCSI_AHCI
@@ -1231,6 +1238,7 @@ config TARGET_LS1012A2G5RDB
bool "Support ls1012a2g5rdb"
select ARCH_LS1012A
select ARM64
+ select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
imply SCSI
help
@@ -1243,6 +1251,7 @@ config TARGET_LS1012AFRWY
bool "Support ls1012afrwy"
select ARCH_LS1012A
select ARM64
+ select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
imply SCSI
imply SCSI_AHCI
@@ -1256,6 +1265,7 @@ config TARGET_LS1012AFRDM
bool "Support ls1012afrdm"
select ARCH_LS1012A
select ARM64
+ select ARCH_SUPPORT_TFABOOT
help
Support for Freescale LS1012AFRDM platform.
The LS1012A Freedom board (FRDM) is a high-performance
@@ -1267,6 +1277,7 @@ config TARGET_LS1028AQDS
select ARCH_LS1028A
select ARM64
select ARMV8_MULTIENTRY
+ select ARCH_SUPPORT_TFABOOT
help
Support for Freescale LS1028AQDS platform
The LS1028A Development System (QDS) is a high-performance
@@ -1278,6 +1289,7 @@ config TARGET_LS1028ARDB
select ARCH_LS1028A
select ARM64
select ARMV8_MULTIENTRY
+ select ARCH_SUPPORT_TFABOOT
help
Support for Freescale LS1028ARDB platform
The LS1028A Development System (RDB) is a high-performance
@@ -1290,6 +1302,7 @@ config TARGET_LS1088ARDB
select ARCH_MISC_INIT
select ARM64
select ARMV8_MULTIENTRY
+ select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
select SUPPORT_SPL
select FSL_DDR_INTERACTIVE if !SD_BOOT
@@ -1348,6 +1361,7 @@ config TARGET_LS1043AQDS
select ARCH_LS1043A
select ARM64
select ARMV8_MULTIENTRY
+ select ARCH_SUPPORT_TFABOOT
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select SUPPORT_SPL
@@ -1362,6 +1376,7 @@ config TARGET_LS1043ARDB
select ARCH_LS1043A
select ARM64
select ARMV8_MULTIENTRY
+ select ARCH_SUPPORT_TFABOOT
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select SUPPORT_SPL
@@ -1373,6 +1388,7 @@ config TARGET_LS1046AQDS
select ARCH_LS1046A
select ARM64
select ARMV8_MULTIENTRY
+ select ARCH_SUPPORT_TFABOOT
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select DM_SPI_FLASH if DM_SPI
@@ -1392,6 +1408,7 @@ config TARGET_LS1046ARDB
select ARCH_LS1046A
select ARM64
select ARMV8_MULTIENTRY
+ select ARCH_SUPPORT_TFABOOT
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select DM_SPI_FLASH if DM_SPI
@@ -1543,6 +1560,17 @@ config ARCH_ASPEED
endchoice
+config ARCH_SUPPORT_TFABOOT
+ bool
+
+config TFABOOT
+ bool "Support for booting from TF-A"
+ depends on ARCH_SUPPORT_TFABOOT
+ default n
+ help
+ Enabling this will make a U-Boot binary that is capable of being
+ booted via TF-A.
+
config TI_SECURE_DEVICE
bool "HS Device Type Support"
depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS || ARCH_K3
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index a843c1eb6515..83e6340f161b 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -622,10 +622,3 @@ config HAS_FSL_XHCI_USB
help
For some SoC(such as LS1043A and LS1046A), USB and QE-HDLC multiplex use
pins, select it when the pins are assigned to USB.
-
-config TFABOOT
- bool "Support for booting from TFA"
- default n
- help
- Enabling this will make a U-Boot binary that is capable of being
- booted via TFA.
--
2.21.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH v2 2/2] arm: qemu: fix failure in flash initialization if booting from TF-A
2019-07-03 1:44 [U-Boot] [PATCH v2 0/2] arm: qemu: fix failure if booting from TF-A AKASHI Takahiro
2019-07-03 1:44 ` [U-Boot] [PATCH v2 1/2] arm: move CONFIG_TFABOOT to generic Kconfig AKASHI Takahiro
@ 2019-07-03 1:44 ` AKASHI Takahiro
2019-07-18 23:58 ` Tom Rini
2019-07-16 2:50 ` [U-Boot] [PATCH v2 0/2] arm: qemu: fix failure " AKASHI Takahiro
2 siblings, 1 reply; 6+ messages in thread
From: AKASHI Takahiro @ 2019-07-03 1:44 UTC (permalink / raw)
To: u-boot
If U-Boot is loaded and started from TF-A (you need to change
SYS_TEXT_BASE to 0x60000000), it will hang up at flash initialization.
If secure mode is off (default, or -machine virt,secure=off) at qemu,
it will provide dtb with two flash memory banks:
flash at 0 {
bank-width = <0x4>;
reg = <0x0 0x0 0x0 0x4000000 0x0 0x4000000 0x0 0x4000000>;
compatible = "cfi-flash";
};
If secure mode is on, on the other hand, qemu provides dtb with 1 bank:
flash at 0 {
bank-width = <0x4>;
reg = <0x0 0x4000000 0x0 0x4000000>;
compatible = "cfi-flash";
};
As a result, flash_init()/flash_get_size() will eventually fail.
With this patch applied, relevant CONFIG values are modified.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
---
arch/arm/Kconfig | 1 +
include/configs/qemu-arm.h | 5 +++++
2 files changed, 6 insertions(+)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index fe174d02d75a..64552ac5607e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -830,6 +830,7 @@ config ARCH_OWL
config ARCH_QEMU
bool "QEMU Virtual Platform"
+ select ARCH_SUPPORT_TFABOOT
select DM
select DM_SERIAL
select OF_CONTROL
diff --git a/include/configs/qemu-arm.h b/include/configs/qemu-arm.h
index 65fdb1e92981..35e3c5ad7a8d 100644
--- a/include/configs/qemu-arm.h
+++ b/include/configs/qemu-arm.h
@@ -46,8 +46,13 @@
#define CONFIG_SYS_CBSIZE 512
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#ifdef CONFIG_TFABOOT
+#define CONFIG_SYS_FLASH_BASE 0x4000000
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#else
#define CONFIG_SYS_FLASH_BASE 0x0
#define CONFIG_SYS_MAX_FLASH_BANKS 2
+#endif
#define CONFIG_SYS_MAX_FLASH_SECT 256 /* Sector: 256K, Bank: 64M */
#endif /* __CONFIG_H */
--
2.21.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH v2 0/2] arm: qemu: fix failure if booting from TF-A
2019-07-03 1:44 [U-Boot] [PATCH v2 0/2] arm: qemu: fix failure if booting from TF-A AKASHI Takahiro
2019-07-03 1:44 ` [U-Boot] [PATCH v2 1/2] arm: move CONFIG_TFABOOT to generic Kconfig AKASHI Takahiro
2019-07-03 1:44 ` [U-Boot] [PATCH v2 2/2] arm: qemu: fix failure in flash initialization if booting from TF-A AKASHI Takahiro
@ 2019-07-16 2:50 ` AKASHI Takahiro
2 siblings, 0 replies; 6+ messages in thread
From: AKASHI Takahiro @ 2019-07-16 2:50 UTC (permalink / raw)
To: u-boot
Hi Albert, Tuomas,
Ping. Can you review this patch, please?
-Takahiro Akashi
On Wed, Jul 03, 2019 at 10:44:38AM +0900, AKASHI Takahiro wrote:
> With this patch, hang-up of U-Boot, as described in patch#2, will be fixed
> if it is loaded and started from TF-A.
>
> Changes in v2 (July 3, 2019)
> * add patch#1 (preparatory patch)
> * remove a reference to unnecessary patch in the commit message
>
> AKASHI Takahiro (2):
> arm: move CONFIG_TFABOOT to generic Kconfig
> arm: qemu: fix failure in flash initialization if booting from TF-A
>
> arch/arm/Kconfig | 29 +++++++++++++++++++++++
> arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 7 ------
> include/configs/qemu-arm.h | 5 ++++
> 3 files changed, 34 insertions(+), 7 deletions(-)
>
> --
> 2.21.0
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH v2 1/2] arm: move CONFIG_TFABOOT to generic Kconfig
2019-07-03 1:44 ` [U-Boot] [PATCH v2 1/2] arm: move CONFIG_TFABOOT to generic Kconfig AKASHI Takahiro
@ 2019-07-18 23:57 ` Tom Rini
0 siblings, 0 replies; 6+ messages in thread
From: Tom Rini @ 2019-07-18 23:57 UTC (permalink / raw)
To: u-boot
On Wed, Jul 03, 2019 at 10:44:39AM +0900, AKASHI Takahiro wrote:
> Currently, CONFIG_TFABOOT is located in armv8/fsl-layerscape Kconfig,
> but it will be also useful for other targets if some additional
> configuration are necessary.
> So move it to arch/arm/Kconfig.
>
> Please note that CONFIG_TFABOOT still depends on
> CONFIG_ARCH_SUPPORT_TFABOOT and so the menu won't come up
> if any target doesn't need its own customization for TF-A boot.
> This will maintain the compatibility.
>
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> Cc: Rajesh Bhagat <rajesh.bhagat@nxp.com>
> Cc: York Sun <york.sun@nxp.com>
> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
> Cc: Priyanka Jain <priyanka.jain@nxp.com>
> Cc: Sriram Dash <sriram.dash@nxp.com>
> Cc: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> Cc: Peng Ma <peng.ma@nxp.com>
> Cc: Yuantian Tang <andy.tang@nxp.com>
> Cc: Pankit Garg <pankit.garg@nxp.com>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190718/f0538d02/attachment.sig>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH v2 2/2] arm: qemu: fix failure in flash initialization if booting from TF-A
2019-07-03 1:44 ` [U-Boot] [PATCH v2 2/2] arm: qemu: fix failure in flash initialization if booting from TF-A AKASHI Takahiro
@ 2019-07-18 23:58 ` Tom Rini
0 siblings, 0 replies; 6+ messages in thread
From: Tom Rini @ 2019-07-18 23:58 UTC (permalink / raw)
To: u-boot
On Wed, Jul 03, 2019 at 10:44:40AM +0900, AKASHI Takahiro wrote:
> If U-Boot is loaded and started from TF-A (you need to change
> SYS_TEXT_BASE to 0x60000000), it will hang up at flash initialization.
>
> If secure mode is off (default, or -machine virt,secure=off) at qemu,
> it will provide dtb with two flash memory banks:
> flash at 0 {
> bank-width = <0x4>;
> reg = <0x0 0x0 0x0 0x4000000 0x0 0x4000000 0x0 0x4000000>;
> compatible = "cfi-flash";
> };
> If secure mode is on, on the other hand, qemu provides dtb with 1 bank:
> flash at 0 {
> bank-width = <0x4>;
> reg = <0x0 0x4000000 0x0 0x4000000>;
> compatible = "cfi-flash";
> };
>
> As a result, flash_init()/flash_get_size() will eventually fail.
> With this patch applied, relevant CONFIG values are modified.
>
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190718/4a70447f/attachment.sig>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-07-18 23:58 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-03 1:44 [U-Boot] [PATCH v2 0/2] arm: qemu: fix failure if booting from TF-A AKASHI Takahiro
2019-07-03 1:44 ` [U-Boot] [PATCH v2 1/2] arm: move CONFIG_TFABOOT to generic Kconfig AKASHI Takahiro
2019-07-18 23:57 ` Tom Rini
2019-07-03 1:44 ` [U-Boot] [PATCH v2 2/2] arm: qemu: fix failure in flash initialization if booting from TF-A AKASHI Takahiro
2019-07-18 23:58 ` Tom Rini
2019-07-16 2:50 ` [U-Boot] [PATCH v2 0/2] arm: qemu: fix failure " AKASHI Takahiro
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.