From: Daniel Baluta <daniel.baluta@nxp.com> To: m.felsch@pengutronix.de, shawnguo@kernel.org Cc: mark.rutland@arm.com, aisheng.dong@nxp.com, peng.fan@nxp.com, anson.huang@nxp.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-imx@nxp.com, shengjiu.wang@nxp.com, paul.olaru@nxp.com, robh+dt@kernel.org, kernel@pengutronix.de, leonard.crestez@nxp.com, festevam@gmail.com, linux-arm-kernel@lists.infradead.org, sound-open-firmware@alsa-project.org, Daniel Baluta <daniel.baluta@nxp.com> Subject: [PATCH v2 0/5] Add DSP node for i.MX8QXP board to be used by DSP SOF driver Date: Tue, 23 Jul 2019 11:40:59 +0300 [thread overview] Message-ID: <20190723084104.12639-1-daniel.baluta@nxp.com> (raw) i.MX8QXP boards feature an Hifi4 DSP from Tensilica. This patch series aims on adding the DT node describing the DSP, but it also contains the Linux SOF DSP driver that will use the DT node for easier review. Note that we switched to the new yaml format for bindings documentation. The DSP will run SOF Firmware [1]. Patches 1,2,3 are adding support for Linux DSP driver are already sent for review to SOF folks [2] [1] https://github.com/thesofproject/sof [2] https://github.com/thesofproject/linux/pull/1048/commits Changes since v1: - removed 'clk: imx8: Add DSP related clocks' as it was already applied by Shawn - add patches adding support for Linux DSP driver to make things clear for review - add maxItems property for PM in DT bindings doc Daniel Baluta (5): ASoC: SOF: imx: Add i.MX8 HW support ASoC: SOF: topology: Add dummy support for i.MX8 DAIs ASoC: SOF: Add DT DSP device support arm64: dts: imx8qxp: Add DSP DT node dt-bindings: dsp: fsl: Add DSP core binding support .../devicetree/bindings/dsp/fsl,dsp.yaml | 87 ++++ arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 4 + arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 32 ++ include/sound/sof/dai.h | 2 + include/uapi/sound/sof/tokens.h | 8 + sound/soc/sof/Kconfig | 10 + sound/soc/sof/Makefile | 4 + sound/soc/sof/imx/Kconfig | 21 + sound/soc/sof/imx/Makefile | 7 + sound/soc/sof/imx/imx8.c | 464 ++++++++++++++++++ sound/soc/sof/sof-dt-dev.c | 159 ++++++ sound/soc/sof/topology.c | 30 ++ 12 files changed, 828 insertions(+) create mode 100644 Documentation/devicetree/bindings/dsp/fsl,dsp.yaml create mode 100644 sound/soc/sof/imx/Kconfig create mode 100644 sound/soc/sof/imx/Makefile create mode 100644 sound/soc/sof/imx/imx8.c create mode 100644 sound/soc/sof/sof-dt-dev.c -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Daniel Baluta <daniel.baluta@nxp.com> To: m.felsch@pengutronix.de, shawnguo@kernel.org Cc: mark.rutland@arm.com, aisheng.dong@nxp.com, peng.fan@nxp.com, anson.huang@nxp.com, devicetree@vger.kernel.org, Daniel Baluta <daniel.baluta@nxp.com>, shengjiu.wang@nxp.com, linux-kernel@vger.kernel.org, paul.olaru@nxp.com, robh+dt@kernel.org, linux-imx@nxp.com, kernel@pengutronix.de, leonard.crestez@nxp.com, festevam@gmail.com, linux-arm-kernel@lists.infradead.org, sound-open-firmware@alsa-project.org Subject: [PATCH v2 0/5] Add DSP node for i.MX8QXP board to be used by DSP SOF driver Date: Tue, 23 Jul 2019 11:40:59 +0300 [thread overview] Message-ID: <20190723084104.12639-1-daniel.baluta@nxp.com> (raw) i.MX8QXP boards feature an Hifi4 DSP from Tensilica. This patch series aims on adding the DT node describing the DSP, but it also contains the Linux SOF DSP driver that will use the DT node for easier review. Note that we switched to the new yaml format for bindings documentation. The DSP will run SOF Firmware [1]. Patches 1,2,3 are adding support for Linux DSP driver are already sent for review to SOF folks [2] [1] https://github.com/thesofproject/sof [2] https://github.com/thesofproject/linux/pull/1048/commits Changes since v1: - removed 'clk: imx8: Add DSP related clocks' as it was already applied by Shawn - add patches adding support for Linux DSP driver to make things clear for review - add maxItems property for PM in DT bindings doc Daniel Baluta (5): ASoC: SOF: imx: Add i.MX8 HW support ASoC: SOF: topology: Add dummy support for i.MX8 DAIs ASoC: SOF: Add DT DSP device support arm64: dts: imx8qxp: Add DSP DT node dt-bindings: dsp: fsl: Add DSP core binding support .../devicetree/bindings/dsp/fsl,dsp.yaml | 87 ++++ arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 4 + arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 32 ++ include/sound/sof/dai.h | 2 + include/uapi/sound/sof/tokens.h | 8 + sound/soc/sof/Kconfig | 10 + sound/soc/sof/Makefile | 4 + sound/soc/sof/imx/Kconfig | 21 + sound/soc/sof/imx/Makefile | 7 + sound/soc/sof/imx/imx8.c | 464 ++++++++++++++++++ sound/soc/sof/sof-dt-dev.c | 159 ++++++ sound/soc/sof/topology.c | 30 ++ 12 files changed, 828 insertions(+) create mode 100644 Documentation/devicetree/bindings/dsp/fsl,dsp.yaml create mode 100644 sound/soc/sof/imx/Kconfig create mode 100644 sound/soc/sof/imx/Makefile create mode 100644 sound/soc/sof/imx/imx8.c create mode 100644 sound/soc/sof/sof-dt-dev.c -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-07-23 8:41 UTC|newest] Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-07-23 8:40 Daniel Baluta [this message] 2019-07-23 8:40 ` [PATCH v2 0/5] Add DSP node for i.MX8QXP board to be used by DSP SOF driver Daniel Baluta 2019-07-23 8:41 ` [PATCH v2 1/5] ASoC: SOF: imx: Add i.MX8 HW support Daniel Baluta 2019-07-23 8:41 ` Daniel Baluta 2019-07-23 15:01 ` [Sound-open-firmware] " Pierre-Louis Bossart 2019-07-23 15:01 ` Pierre-Louis Bossart 2019-07-24 6:54 ` Daniel Baluta 2019-07-24 6:54 ` Daniel Baluta 2019-07-24 6:54 ` Daniel Baluta 2019-07-24 8:32 ` Lucas Stach 2019-07-24 8:32 ` Lucas Stach 2019-07-24 8:58 ` Daniel Baluta 2019-07-24 8:58 ` Daniel Baluta 2019-07-24 8:58 ` Daniel Baluta 2019-07-23 8:41 ` [PATCH v2 2/5] ASoC: SOF: topology: Add dummy support for i.MX8 DAIs Daniel Baluta 2019-07-23 8:41 ` Daniel Baluta 2019-07-23 8:41 ` [PATCH v2 3/5] ASoC: SOF: Add DT DSP device support Daniel Baluta 2019-07-23 8:41 ` Daniel Baluta 2019-07-23 15:11 ` [Sound-open-firmware] " Pierre-Louis Bossart 2019-07-23 15:11 ` Pierre-Louis Bossart 2019-07-24 7:04 ` Daniel Baluta 2019-07-24 7:04 ` Daniel Baluta 2019-07-24 7:04 ` Daniel Baluta 2019-08-07 14:39 ` Daniel Baluta 2019-08-07 14:39 ` Daniel Baluta 2019-08-07 15:22 ` Pierre-Louis Bossart 2019-08-07 15:22 ` Pierre-Louis Bossart 2019-08-07 15:28 ` Daniel Baluta 2019-08-07 15:28 ` Daniel Baluta 2019-08-08 6:27 ` Daniel Baluta 2019-08-08 6:27 ` Daniel Baluta 2019-08-07 15:29 ` Daniel Baluta 2019-08-07 15:29 ` Daniel Baluta 2019-08-07 16:01 ` Pierre-Louis Bossart 2019-08-07 16:01 ` Pierre-Louis Bossart 2019-08-07 16:01 ` Pierre-Louis Bossart 2019-07-23 8:41 ` [PATCH v2 4/5] arm64: dts: imx8qxp: Add DSP DT node Daniel Baluta 2019-07-23 8:41 ` Daniel Baluta 2019-07-23 8:41 ` [PATCH v2 5/5] dt-bindings: dsp: fsl: Add DSP core binding support Daniel Baluta 2019-07-23 8:41 ` Daniel Baluta 2019-07-23 22:32 ` Rob Herring 2019-07-23 22:32 ` Rob Herring 2019-07-23 22:32 ` Rob Herring
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190723084104.12639-1-daniel.baluta@nxp.com \ --to=daniel.baluta@nxp.com \ --cc=aisheng.dong@nxp.com \ --cc=anson.huang@nxp.com \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=leonard.crestez@nxp.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=m.felsch@pengutronix.de \ --cc=mark.rutland@arm.com \ --cc=paul.olaru@nxp.com \ --cc=peng.fan@nxp.com \ --cc=robh+dt@kernel.org \ --cc=shawnguo@kernel.org \ --cc=shengjiu.wang@nxp.com \ --cc=sound-open-firmware@alsa-project.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.