* [PATCH v2 1/2] dt-bindings: vendor-prefixes: Add Admatec AG
@ 2019-07-26 6:17 ` Krzysztof Kozlowski
0 siblings, 0 replies; 19+ messages in thread
From: Krzysztof Kozlowski @ 2019-07-26 6:17 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
devicetree, linux-kernel, linux-arm-kernel, Schrempf Frieder
Cc: Krzysztof Kozlowski
Add vendor prefix for Admatec AG.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
Changes since v1:
New patch
---
Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 6992bbbbffab..94c816f74209 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -43,6 +43,8 @@ patternProperties:
description: AD Holdings Plc.
"^adi,.*":
description: Analog Devices, Inc.
+ "^admatec,.*":
+ description: Admatec AG
"^advantech,.*":
description: Advantech Corporation
"^aeroflexgaisler,.*":
--
2.17.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v2 1/2] dt-bindings: vendor-prefixes: Add Admatec AG
@ 2019-07-26 6:17 ` Krzysztof Kozlowski
0 siblings, 0 replies; 19+ messages in thread
From: Krzysztof Kozlowski @ 2019-07-26 6:17 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
devicetree, linux-kernel, linux-arm-kernel, Schrempf Frieder
Cc: Krzysztof Kozlowski
Add vendor prefix for Admatec AG.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
Changes since v1:
New patch
---
Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 6992bbbbffab..94c816f74209 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -43,6 +43,8 @@ patternProperties:
description: AD Holdings Plc.
"^adi,.*":
description: Analog Devices, Inc.
+ "^admatec,.*":
+ description: Admatec AG
"^advantech,.*":
description: Advantech Corporation
"^aeroflexgaisler,.*":
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v2 2/2] ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards
2019-07-26 6:17 ` Krzysztof Kozlowski
@ 2019-07-26 6:17 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 19+ messages in thread
From: Krzysztof Kozlowski @ 2019-07-26 6:17 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
devicetree, linux-kernel, linux-arm-kernel, Schrempf Frieder
Cc: Krzysztof Kozlowski
Add support for i.MX6UL modules from Kontron Electronics GmbH (before
acquisition: Exceet Electronics) and evalkit boards based on it:
1. N6310 SOM: i.MX6 UL System-on-Module, a 25x25 mm solderable module
(LGA pads and pin castellations) with 256 MB RAM, 1 MB NOR-Flash,
256 MB NAND and other interfaces,
2. N6310 S: evalkit, w/wo eMMC, without display,
3. N6310 S 43: evalkit with 4.3" display,
4. N6310 S 50: evalkit with 5.0" display.
This includes device nodes for unsupported displays (Admatec
T043C004800272T2A and T070P133T0S301).
The work is based on Exceet/Kontron source code (GPLv2) with numerous
changes:
1. Reorganize files,
2. Rename Exceet -> Kontron,
3. Rename models/compatibles to match newest Kontron product naming,
4. Fix coding style errors,
5. Fix DTC warnings,
6. Extend compatibles so eval boards inherit the SoM compatible,
7. Use defines instead of GPIO flag values,
8. Use proper vendor compatible for Macronix SPI NOR,
9. Sort nodes alphabetically.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
Changes since v1, after Frieder's review:
1. Remove unneeded license notes,
2. Add Kontron copyright (2018),
3. Rename the files/models/compatibles to new naming - N6310,
4. Remove unneeded CPU operating points override,
5. Switch regulator nodes into simple children nodes without addresses
(so not simple bus),
6. Use proper vendor compatible for Macronix SPI NOR.
---
.../devicetree/bindings/arm/fsl.yaml | 4 +
arch/arm/boot/dts/Makefile | 3 +
.../boot/dts/imx6ul-kontron-n6310-s-43.dts | 120 +++++
.../boot/dts/imx6ul-kontron-n6310-s-50.dts | 120 +++++
arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts | 424 ++++++++++++++++++
.../boot/dts/imx6ul-kontron-n6310-som.dtsi | 137 ++++++
6 files changed, 808 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts
create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6310-s-50.dts
create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts
create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 7294ac36f4c0..afb61a55e26f 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -161,6 +161,10 @@ properties:
items:
- enum:
- fsl,imx6ul-14x14-evk # i.MX6 UltraLite 14x14 EVK Board
+ - kontron,n6310-som # Kontron N6310 SOM
+ - kontron,n6310-s # Kontron N6310 S Board
+ - kontron,n6310-s-43 # Kontron N6310 S 43 Board
+ - kontron,n6310-s-50 # Kontron N6310 S 50 Board
- const: fsl,imx6ul
- description: i.MX6ULL based Boards
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 9159fa2cea90..28b6cb3454a3 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -569,6 +569,9 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-geam.dtb \
imx6ul-isiot-emmc.dtb \
imx6ul-isiot-nand.dtb \
+ imx6ul-kontron-n6310-s.dtb \
+ imx6ul-kontron-n6310-s-43.dtb \
+ imx6ul-kontron-n6310-s-50.dtb \
imx6ul-liteboard.dtb \
imx6ul-opos6uldev.dtb \
imx6ul-pico-hobbit.dtb \
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts
new file mode 100644
index 000000000000..63a0d8408fea
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include "imx6ul-kontron-n6310-s.dts"
+
+/ {
+ model = "Kontron N6310 S 43";
+ compatible = "kontron,n6310-s-43", "kontron,n6310-s",
+ "kontron,n6310-som", "fsl,imx6ul";
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm7 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ status = "okay";
+ };
+
+ panel {
+ compatible = "admatec,t043c004800272t2a";
+ backlight = <&backlight>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+};
+
+&i2c4 {
+ gt911@5d {
+ compatible = "goodix,gt928";
+ reg = <0x5d>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cap_touch>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <6 8>;
+ reset-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+ irq-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&iomuxc {
+ pinctrl_lcdif_dat: lcdifdatgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
+ MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
+ MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
+ MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
+ MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
+ MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
+ MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
+ MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
+ MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
+ MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
+ MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
+ MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
+ MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
+ MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
+ MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
+ MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
+ MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
+ MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
+ MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79
+ MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79
+ MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79
+ MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79
+ MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79
+ MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79
+ >;
+ };
+
+ pinctrl_lcdif_ctrl: lcdifctrlgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
+ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
+ MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
+ MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
+ MX6UL_PAD_LCD_RESET__LCDIF_RESET 0x79
+ >;
+ };
+
+ pinctrl_cap_touch: captouchgrp {
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x1b0b0 /* Touch Interrupt */
+ MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b0b0 /* Touch Reset */
+ MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x1b0b0 /* Touch Wake */
+ >;
+ };
+
+ pinctrl_pwm7: pwm7grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_VSYNC__PWM7_OUT 0x110b0
+ >;
+ };
+};
+
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif_dat
+ &pinctrl_lcdif_ctrl>;
+ status = "okay";
+
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+};
+
+&pwm7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm7>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s-50.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s-50.dts
new file mode 100644
index 000000000000..c3b133b3351e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-s-50.dts
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include "imx6ul-kontron-n6310-s.dts"
+
+/ {
+ model = "Kontron N6310 S 50";
+ compatible = "kontron,n6310-s-50", "kontron,n6310-s",
+ "kontron,n6310-som", "fsl,imx6ul";
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm7 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ status = "okay";
+ };
+
+ panel {
+ compatible = "admatec,t070p133t0s301";
+ backlight = <&backlight>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+};
+
+&i2c4 {
+ gt911@5d {
+ compatible = "goodix,gt928";
+ reg = <0x5d>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cap_touch>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <6 8>;
+ reset-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+ irq-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&iomuxc {
+ pinctrl_lcdif_dat: lcdifdatgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
+ MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
+ MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
+ MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
+ MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
+ MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
+ MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
+ MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
+ MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
+ MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
+ MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
+ MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
+ MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
+ MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
+ MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
+ MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
+ MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
+ MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
+ MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79
+ MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79
+ MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79
+ MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79
+ MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79
+ MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79
+ >;
+ };
+
+ pinctrl_lcdif_ctrl: lcdifctrlgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
+ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
+ MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
+ MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
+ MX6UL_PAD_LCD_RESET__LCDIF_RESET 0x79
+ >;
+ };
+
+ pinctrl_cap_touch: captouchgrp {
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x1b0b0 /* Touch Interrupt */
+ MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b0b0 /* Touch Reset */
+ MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x1b0b0 /* Touch Wake */
+ >;
+ };
+
+ pinctrl_pwm7: pwm7grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_VSYNC__PWM7_OUT 0x110b0
+ >;
+ };
+};
+
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif_dat
+ &pinctrl_lcdif_ctrl>;
+ status = "okay";
+
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+};
+
+&pwm7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm7>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts
new file mode 100644
index 000000000000..5621a3dbf2dc
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "imx6ul-kontron-n6310-som.dtsi"
+
+/ {
+ model = "Kontron N6310 S";
+ compatible = "kontron,n6310-s", "kontron,n6310-som", "fsl,imx6ul";
+
+ pwm-beeper {
+ compatible = "pwm-beeper";
+ pwms = <&pwm8 0 5000>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led1 {
+ label = "debug-led1";
+ gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led2 {
+ label = "debug-led2";
+ gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led3 {
+ label = "debug-led3";
+ gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ reg_3v3: regulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_vref_adc: regulator2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vref-adc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_usb_otg1_vbus: regulator3 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+ };
+
+};
+
+&adc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc1>;
+ num-channels = <3>;
+ vref-supply = <®_vref_adc>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ status = "okay";
+};
+
+&ecspi1 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ fram@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ spi-cpha;
+ spi-cpol;
+ pagesize = <1>;
+ size = <8192>;
+ address-width = <16>;
+ };
+};
+
+&fec1 {
+ pinctrl-0 = <&pinctrl_enet1>;
+ /delete-node/ mdio;
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>;
+ phy-mode = "rmii";
+ phy-handle = <ðphy2>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ micrel,led-mode = <0>;
+ clocks = <&clks IMX6UL_CLK_ENET_REF>;
+ clock-names = "rmii-ref";
+ };
+
+ ethphy2: ethernet-phy@2 {
+ reg = <2>;
+ micrel,led-mode = <0>;
+ clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+ clock-names = "rmii-ref";
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+
+ rtc@32 {
+ compatible = "epson,rx8900";
+ reg = <0x32>;
+ };
+};
+
+&iomuxc {
+ pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>;
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x30b0
+ >;
+ };
+
+ pinctrl_gpio: gpio {
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0 /* DOUT1 */
+ MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x1b0b0 /* DIN1 */
+ MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x1b0b0 /* DOUT2 */
+ MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0b0 /* DIN2 */
+ >;
+ };
+
+ pinctrl_usbotg1: usbotg1 {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x1b0b0
+ >;
+ };
+
+ pinctrl_gpio_leds: gpio_leds {
+ fsl,pins = <
+ MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x1b0b0 /* LED H14 */
+ MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x1b0b0 /* LED H15 */
+ MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 /* LED H16 */
+ >;
+ };
+
+ /* FRAM */
+ pinctrl_ecspi1: ecspi1grp-1 {
+ fsl,pins = <
+ MX6UL_PAD_CSI_DATA07__ECSPI1_MISO 0x100b1
+ MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x100b1
+ MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK 0x100b1
+ MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x100b1 /* ECSPI1-CS1 */
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b009
+ >;
+ };
+
+ pinctrl_enet2_mdio: enet2mdiogrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
+ MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp{
+ fsl,pins = <
+ MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020
+ MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020
+ >;
+ };
+
+ pinctrl_pwm8: pwm8grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_HSYNC__PWM8_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_DATA04__UART2_DCE_TX 0x1b0b1
+ MX6UL_PAD_NAND_DATA05__UART2_DCE_RX 0x1b0b1
+ MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS 0x1b0b1
+ /*
+ * mux unused RTS to make sure it doesn't cause
+ * any interrupts when it is undefined
+ */
+ MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1
+ MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b1
+ MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+ MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x100b1 /* SD1_CD */
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10059
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170b9
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170b9
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170b9
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001b8b0
+ MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001b8b0
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x4001f8b0
+ MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x4001f8b0
+ >;
+ };
+
+ pinctrl_adc1: adc1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0
+ MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
+ MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0xb0
+ >;
+ };
+};
+
+&pwm8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm8>;
+ status = "okay";
+};
+
+&snvs_poweroff {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ linux,rs485-enabled-at-boot-time;
+ rs485-rx-during-tx;
+ rs485-rts-active-low;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&usbotg1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1>;
+ dr_mode = "otg";
+ status = "okay";
+ srp-disable;
+ hnp-disable;
+ adp-disable;
+ vbus-supply = <®_usb_otg1_vbus>;
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ vmmc-supply = <®_3v3>;
+ voltage-ranges = <3300 3300>;
+ no-1-8-v;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ tuning-step = <2>;
+ non-removable;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ vmmc-supply = <®_3v3>;
+ voltage-ranges = <3300 3300>;
+ no-1-8-v;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ status = "okay";
+ fsl,ext-reset-output;
+};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
new file mode 100644
index 000000000000..084a8ccd574e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include "imx6ul.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Kontron N6310 SOM";
+ compatible = "kontron,n6310-som", "fsl,imx6ul";
+
+ memory@80000000 {
+ reg = <0x80000000 0x10000000>;
+ };
+};
+
+&cpu0 {
+ clock-frequency = <528000000>;
+};
+
+&ecspi2 {
+ cs-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ status = "okay";
+
+ flash: mx25v80@0 {
+ compatible = "mxicy,mx25v8035f", "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio>;
+ phy-mode = "rmii";
+ phy-handle = <ðphy1>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ micrel,led-mode = <0>;
+ clocks = <&clks IMX6UL_CLK_ENET_REF>;
+ clock-names = "rmii-ref";
+ };
+ };
+};
+
+&fec2 {
+ phy-mode = "rmii";
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reset_out>;
+
+ pinctrl_reset_out: rstoutgrp {
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_DATA03__ECSPI2_MISO 0x100b1
+ MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI 0x100b1
+ MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK 0x100b1
+ MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x100b1
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b009
+ >;
+ };
+
+ pinctrl_enet1_mdio: enet1mdiogrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
+ MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
+ >;
+ };
+
+ pinctrl_qspi: qspigrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a1
+ MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1
+ MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a1
+ MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a1
+ MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a1
+ MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1
+ >;
+ };
+};
+
+&qspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi>;
+ status = "okay";
+
+ flash0: w25m02gv@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-nand";
+ spi-max-frequency = <108000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ reg = <0>;
+
+ partition@0 {
+ label = "ubi1";
+ reg = <0x00000000 0x08000000>;
+ };
+
+ partition@8000000 {
+ label = "ubi2";
+ reg = <0x08000000 0x08000000>;
+ };
+ };
+};
--
2.17.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v2 2/2] ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards
@ 2019-07-26 6:17 ` Krzysztof Kozlowski
0 siblings, 0 replies; 19+ messages in thread
From: Krzysztof Kozlowski @ 2019-07-26 6:17 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
devicetree, linux-kernel, linux-arm-kernel, Schrempf Frieder
Cc: Krzysztof Kozlowski
Add support for i.MX6UL modules from Kontron Electronics GmbH (before
acquisition: Exceet Electronics) and evalkit boards based on it:
1. N6310 SOM: i.MX6 UL System-on-Module, a 25x25 mm solderable module
(LGA pads and pin castellations) with 256 MB RAM, 1 MB NOR-Flash,
256 MB NAND and other interfaces,
2. N6310 S: evalkit, w/wo eMMC, without display,
3. N6310 S 43: evalkit with 4.3" display,
4. N6310 S 50: evalkit with 5.0" display.
This includes device nodes for unsupported displays (Admatec
T043C004800272T2A and T070P133T0S301).
The work is based on Exceet/Kontron source code (GPLv2) with numerous
changes:
1. Reorganize files,
2. Rename Exceet -> Kontron,
3. Rename models/compatibles to match newest Kontron product naming,
4. Fix coding style errors,
5. Fix DTC warnings,
6. Extend compatibles so eval boards inherit the SoM compatible,
7. Use defines instead of GPIO flag values,
8. Use proper vendor compatible for Macronix SPI NOR,
9. Sort nodes alphabetically.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
Changes since v1, after Frieder's review:
1. Remove unneeded license notes,
2. Add Kontron copyright (2018),
3. Rename the files/models/compatibles to new naming - N6310,
4. Remove unneeded CPU operating points override,
5. Switch regulator nodes into simple children nodes without addresses
(so not simple bus),
6. Use proper vendor compatible for Macronix SPI NOR.
---
.../devicetree/bindings/arm/fsl.yaml | 4 +
arch/arm/boot/dts/Makefile | 3 +
.../boot/dts/imx6ul-kontron-n6310-s-43.dts | 120 +++++
.../boot/dts/imx6ul-kontron-n6310-s-50.dts | 120 +++++
arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts | 424 ++++++++++++++++++
.../boot/dts/imx6ul-kontron-n6310-som.dtsi | 137 ++++++
6 files changed, 808 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts
create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6310-s-50.dts
create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts
create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 7294ac36f4c0..afb61a55e26f 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -161,6 +161,10 @@ properties:
items:
- enum:
- fsl,imx6ul-14x14-evk # i.MX6 UltraLite 14x14 EVK Board
+ - kontron,n6310-som # Kontron N6310 SOM
+ - kontron,n6310-s # Kontron N6310 S Board
+ - kontron,n6310-s-43 # Kontron N6310 S 43 Board
+ - kontron,n6310-s-50 # Kontron N6310 S 50 Board
- const: fsl,imx6ul
- description: i.MX6ULL based Boards
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 9159fa2cea90..28b6cb3454a3 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -569,6 +569,9 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-geam.dtb \
imx6ul-isiot-emmc.dtb \
imx6ul-isiot-nand.dtb \
+ imx6ul-kontron-n6310-s.dtb \
+ imx6ul-kontron-n6310-s-43.dtb \
+ imx6ul-kontron-n6310-s-50.dtb \
imx6ul-liteboard.dtb \
imx6ul-opos6uldev.dtb \
imx6ul-pico-hobbit.dtb \
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts
new file mode 100644
index 000000000000..63a0d8408fea
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include "imx6ul-kontron-n6310-s.dts"
+
+/ {
+ model = "Kontron N6310 S 43";
+ compatible = "kontron,n6310-s-43", "kontron,n6310-s",
+ "kontron,n6310-som", "fsl,imx6ul";
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm7 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ status = "okay";
+ };
+
+ panel {
+ compatible = "admatec,t043c004800272t2a";
+ backlight = <&backlight>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+};
+
+&i2c4 {
+ gt911@5d {
+ compatible = "goodix,gt928";
+ reg = <0x5d>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cap_touch>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <6 8>;
+ reset-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+ irq-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&iomuxc {
+ pinctrl_lcdif_dat: lcdifdatgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
+ MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
+ MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
+ MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
+ MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
+ MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
+ MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
+ MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
+ MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
+ MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
+ MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
+ MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
+ MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
+ MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
+ MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
+ MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
+ MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
+ MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
+ MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79
+ MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79
+ MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79
+ MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79
+ MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79
+ MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79
+ >;
+ };
+
+ pinctrl_lcdif_ctrl: lcdifctrlgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
+ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
+ MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
+ MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
+ MX6UL_PAD_LCD_RESET__LCDIF_RESET 0x79
+ >;
+ };
+
+ pinctrl_cap_touch: captouchgrp {
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x1b0b0 /* Touch Interrupt */
+ MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b0b0 /* Touch Reset */
+ MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x1b0b0 /* Touch Wake */
+ >;
+ };
+
+ pinctrl_pwm7: pwm7grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_VSYNC__PWM7_OUT 0x110b0
+ >;
+ };
+};
+
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif_dat
+ &pinctrl_lcdif_ctrl>;
+ status = "okay";
+
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+};
+
+&pwm7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm7>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s-50.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s-50.dts
new file mode 100644
index 000000000000..c3b133b3351e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-s-50.dts
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include "imx6ul-kontron-n6310-s.dts"
+
+/ {
+ model = "Kontron N6310 S 50";
+ compatible = "kontron,n6310-s-50", "kontron,n6310-s",
+ "kontron,n6310-som", "fsl,imx6ul";
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm7 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ status = "okay";
+ };
+
+ panel {
+ compatible = "admatec,t070p133t0s301";
+ backlight = <&backlight>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+};
+
+&i2c4 {
+ gt911@5d {
+ compatible = "goodix,gt928";
+ reg = <0x5d>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cap_touch>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <6 8>;
+ reset-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+ irq-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&iomuxc {
+ pinctrl_lcdif_dat: lcdifdatgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
+ MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
+ MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
+ MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
+ MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
+ MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
+ MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
+ MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
+ MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
+ MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
+ MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
+ MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
+ MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
+ MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
+ MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
+ MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
+ MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
+ MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
+ MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79
+ MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79
+ MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79
+ MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79
+ MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79
+ MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79
+ >;
+ };
+
+ pinctrl_lcdif_ctrl: lcdifctrlgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
+ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
+ MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
+ MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
+ MX6UL_PAD_LCD_RESET__LCDIF_RESET 0x79
+ >;
+ };
+
+ pinctrl_cap_touch: captouchgrp {
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x1b0b0 /* Touch Interrupt */
+ MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b0b0 /* Touch Reset */
+ MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x1b0b0 /* Touch Wake */
+ >;
+ };
+
+ pinctrl_pwm7: pwm7grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_VSYNC__PWM7_OUT 0x110b0
+ >;
+ };
+};
+
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif_dat
+ &pinctrl_lcdif_ctrl>;
+ status = "okay";
+
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+};
+
+&pwm7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm7>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts
new file mode 100644
index 000000000000..5621a3dbf2dc
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "imx6ul-kontron-n6310-som.dtsi"
+
+/ {
+ model = "Kontron N6310 S";
+ compatible = "kontron,n6310-s", "kontron,n6310-som", "fsl,imx6ul";
+
+ pwm-beeper {
+ compatible = "pwm-beeper";
+ pwms = <&pwm8 0 5000>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led1 {
+ label = "debug-led1";
+ gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led2 {
+ label = "debug-led2";
+ gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led3 {
+ label = "debug-led3";
+ gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ reg_3v3: regulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_vref_adc: regulator2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vref-adc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_usb_otg1_vbus: regulator3 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+ };
+
+};
+
+&adc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc1>;
+ num-channels = <3>;
+ vref-supply = <®_vref_adc>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ status = "okay";
+};
+
+&ecspi1 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ fram@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ spi-cpha;
+ spi-cpol;
+ pagesize = <1>;
+ size = <8192>;
+ address-width = <16>;
+ };
+};
+
+&fec1 {
+ pinctrl-0 = <&pinctrl_enet1>;
+ /delete-node/ mdio;
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>;
+ phy-mode = "rmii";
+ phy-handle = <ðphy2>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ micrel,led-mode = <0>;
+ clocks = <&clks IMX6UL_CLK_ENET_REF>;
+ clock-names = "rmii-ref";
+ };
+
+ ethphy2: ethernet-phy@2 {
+ reg = <2>;
+ micrel,led-mode = <0>;
+ clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+ clock-names = "rmii-ref";
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+
+ rtc@32 {
+ compatible = "epson,rx8900";
+ reg = <0x32>;
+ };
+};
+
+&iomuxc {
+ pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>;
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x30b0
+ >;
+ };
+
+ pinctrl_gpio: gpio {
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0 /* DOUT1 */
+ MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x1b0b0 /* DIN1 */
+ MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x1b0b0 /* DOUT2 */
+ MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0b0 /* DIN2 */
+ >;
+ };
+
+ pinctrl_usbotg1: usbotg1 {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x1b0b0
+ >;
+ };
+
+ pinctrl_gpio_leds: gpio_leds {
+ fsl,pins = <
+ MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x1b0b0 /* LED H14 */
+ MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x1b0b0 /* LED H15 */
+ MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 /* LED H16 */
+ >;
+ };
+
+ /* FRAM */
+ pinctrl_ecspi1: ecspi1grp-1 {
+ fsl,pins = <
+ MX6UL_PAD_CSI_DATA07__ECSPI1_MISO 0x100b1
+ MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x100b1
+ MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK 0x100b1
+ MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x100b1 /* ECSPI1-CS1 */
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b009
+ >;
+ };
+
+ pinctrl_enet2_mdio: enet2mdiogrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
+ MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp{
+ fsl,pins = <
+ MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020
+ MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020
+ >;
+ };
+
+ pinctrl_pwm8: pwm8grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_HSYNC__PWM8_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_DATA04__UART2_DCE_TX 0x1b0b1
+ MX6UL_PAD_NAND_DATA05__UART2_DCE_RX 0x1b0b1
+ MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS 0x1b0b1
+ /*
+ * mux unused RTS to make sure it doesn't cause
+ * any interrupts when it is undefined
+ */
+ MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1
+ MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b1
+ MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+ MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x100b1 /* SD1_CD */
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10059
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170b9
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170b9
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170b9
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001b8b0
+ MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001b8b0
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x4001f8b0
+ MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x4001f8b0
+ >;
+ };
+
+ pinctrl_adc1: adc1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0
+ MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
+ MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0xb0
+ >;
+ };
+};
+
+&pwm8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm8>;
+ status = "okay";
+};
+
+&snvs_poweroff {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ linux,rs485-enabled-at-boot-time;
+ rs485-rx-during-tx;
+ rs485-rts-active-low;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&usbotg1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1>;
+ dr_mode = "otg";
+ status = "okay";
+ srp-disable;
+ hnp-disable;
+ adp-disable;
+ vbus-supply = <®_usb_otg1_vbus>;
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ vmmc-supply = <®_3v3>;
+ voltage-ranges = <3300 3300>;
+ no-1-8-v;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ tuning-step = <2>;
+ non-removable;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ vmmc-supply = <®_3v3>;
+ voltage-ranges = <3300 3300>;
+ no-1-8-v;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ status = "okay";
+ fsl,ext-reset-output;
+};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
new file mode 100644
index 000000000000..084a8ccd574e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include "imx6ul.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Kontron N6310 SOM";
+ compatible = "kontron,n6310-som", "fsl,imx6ul";
+
+ memory@80000000 {
+ reg = <0x80000000 0x10000000>;
+ };
+};
+
+&cpu0 {
+ clock-frequency = <528000000>;
+};
+
+&ecspi2 {
+ cs-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ status = "okay";
+
+ flash: mx25v80@0 {
+ compatible = "mxicy,mx25v8035f", "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio>;
+ phy-mode = "rmii";
+ phy-handle = <ðphy1>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ micrel,led-mode = <0>;
+ clocks = <&clks IMX6UL_CLK_ENET_REF>;
+ clock-names = "rmii-ref";
+ };
+ };
+};
+
+&fec2 {
+ phy-mode = "rmii";
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reset_out>;
+
+ pinctrl_reset_out: rstoutgrp {
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_DATA03__ECSPI2_MISO 0x100b1
+ MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI 0x100b1
+ MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK 0x100b1
+ MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x100b1
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b009
+ >;
+ };
+
+ pinctrl_enet1_mdio: enet1mdiogrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
+ MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
+ >;
+ };
+
+ pinctrl_qspi: qspigrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a1
+ MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1
+ MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a1
+ MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a1
+ MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a1
+ MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1
+ >;
+ };
+};
+
+&qspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi>;
+ status = "okay";
+
+ flash0: w25m02gv@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-nand";
+ spi-max-frequency = <108000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ reg = <0>;
+
+ partition@0 {
+ label = "ubi1";
+ reg = <0x00000000 0x08000000>;
+ };
+
+ partition@8000000 {
+ label = "ubi2";
+ reg = <0x08000000 0x08000000>;
+ };
+ };
+};
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 19+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: vendor-prefixes: Add Admatec AG
2019-07-26 6:17 ` Krzysztof Kozlowski
(?)
@ 2019-07-26 9:48 ` Schrempf Frieder
-1 siblings, 0 replies; 19+ messages in thread
From: Schrempf Frieder @ 2019-07-26 9:48 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Mark Rutland, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team, devicetree, linux-kernel, linux-arm-kernel
On 26.07.19 08:17, Krzysztof Kozlowski wrote:
> Add vendor prefix for Admatec AG.
We get the displays used with the Kontron eval kits from "admatec GmbH"
in Hamburg, not "Admatec AG" in Switzerland. I think we have to
differentiate here.
I will review patch 2/2 soon...
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
>
> ---
>
> Changes since v1:
> New patch
> ---
> Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> index 6992bbbbffab..94c816f74209 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> @@ -43,6 +43,8 @@ patternProperties:
> description: AD Holdings Plc.
> "^adi,.*":
> description: Analog Devices, Inc.
> + "^admatec,.*":
> + description: Admatec AG
> "^advantech,.*":
> description: Advantech Corporation
> "^aeroflexgaisler,.*":
>
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: vendor-prefixes: Add Admatec AG
@ 2019-07-26 9:48 ` Schrempf Frieder
0 siblings, 0 replies; 19+ messages in thread
From: Schrempf Frieder @ 2019-07-26 9:48 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Mark Rutland, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team, devicetree, linux-kernel, linux-arm-kernel
On 26.07.19 08:17, Krzysztof Kozlowski wrote:
> Add vendor prefix for Admatec AG.
We get the displays used with the Kontron eval kits from "admatec GmbH"
in Hamburg, not "Admatec AG" in Switzerland. I think we have to
differentiate here.
I will review patch 2/2 soon...
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
>
> ---
>
> Changes since v1:
> New patch
> ---
> Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> index 6992bbbbffab..94c816f74209 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> @@ -43,6 +43,8 @@ patternProperties:
> description: AD Holdings Plc.
> "^adi,.*":
> description: Analog Devices, Inc.
> + "^admatec,.*":
> + description: Admatec AG
> "^advantech,.*":
> description: Advantech Corporation
> "^aeroflexgaisler,.*":
>
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: vendor-prefixes: Add Admatec AG
@ 2019-07-26 9:48 ` Schrempf Frieder
0 siblings, 0 replies; 19+ messages in thread
From: Schrempf Frieder @ 2019-07-26 9:48 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Mark Rutland, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team, devicetree, linux-kernel, linux-arm-kernel
On 26.07.19 08:17, Krzysztof Kozlowski wrote:
> Add vendor prefix for Admatec AG.
We get the displays used with the Kontron eval kits from "admatec GmbH"
in Hamburg, not "Admatec AG" in Switzerland. I think we have to
differentiate here.
I will review patch 2/2 soon...
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
>
> ---
>
> Changes since v1:
> New patch
> ---
> Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> index 6992bbbbffab..94c816f74209 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> @@ -43,6 +43,8 @@ patternProperties:
> description: AD Holdings Plc.
> "^adi,.*":
> description: Analog Devices, Inc.
> + "^admatec,.*":
> + description: Admatec AG
> "^advantech,.*":
> description: Advantech Corporation
> "^aeroflexgaisler,.*":
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: vendor-prefixes: Add Admatec AG
2019-07-26 9:48 ` Schrempf Frieder
(?)
@ 2019-07-26 10:02 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 19+ messages in thread
From: Krzysztof Kozlowski @ 2019-07-26 10:02 UTC (permalink / raw)
To: Schrempf Frieder
Cc: Rob Herring, Mark Rutland, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
devicetree, linux-kernel, linux-arm-kernel
On Fri, 26 Jul 2019 at 11:48, Schrempf Frieder
<frieder.schrempf@kontron.de> wrote:
>
> On 26.07.19 08:17, Krzysztof Kozlowski wrote:
> > Add vendor prefix for Admatec AG.
>
> We get the displays used with the Kontron eval kits from "admatec GmbH"
> in Hamburg, not "Admatec AG" in Switzerland. I think we have to
> differentiate here.
>
> I will review patch 2/2 soon...
What a coincidence... they have so similar portfolio. After looking at
vendor prefixes that would be the first duplication of name.
To avoid conflict, how about: "admatecde"?
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: vendor-prefixes: Add Admatec AG
@ 2019-07-26 10:02 ` Krzysztof Kozlowski
0 siblings, 0 replies; 19+ messages in thread
From: Krzysztof Kozlowski @ 2019-07-26 10:02 UTC (permalink / raw)
To: Schrempf Frieder
Cc: Rob Herring, Mark Rutland, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
devicetree, linux-kernel, linux-arm-kernel
On Fri, 26 Jul 2019 at 11:48, Schrempf Frieder
<frieder.schrempf@kontron.de> wrote:
>
> On 26.07.19 08:17, Krzysztof Kozlowski wrote:
> > Add vendor prefix for Admatec AG.
>
> We get the displays used with the Kontron eval kits from "admatec GmbH"
> in Hamburg, not "Admatec AG" in Switzerland. I think we have to
> differentiate here.
>
> I will review patch 2/2 soon...
What a coincidence... they have so similar portfolio. After looking at
vendor prefixes that would be the first duplication of name.
To avoid conflict, how about: "admatecde"?
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: vendor-prefixes: Add Admatec AG
@ 2019-07-26 10:02 ` Krzysztof Kozlowski
0 siblings, 0 replies; 19+ messages in thread
From: Krzysztof Kozlowski @ 2019-07-26 10:02 UTC (permalink / raw)
To: Schrempf Frieder
Cc: Mark Rutland, devicetree, Shawn Guo, Sascha Hauer, linux-kernel,
Rob Herring, NXP Linux Team, Pengutronix Kernel Team,
Fabio Estevam, linux-arm-kernel
On Fri, 26 Jul 2019 at 11:48, Schrempf Frieder
<frieder.schrempf@kontron.de> wrote:
>
> On 26.07.19 08:17, Krzysztof Kozlowski wrote:
> > Add vendor prefix for Admatec AG.
>
> We get the displays used with the Kontron eval kits from "admatec GmbH"
> in Hamburg, not "Admatec AG" in Switzerland. I think we have to
> differentiate here.
>
> I will review patch 2/2 soon...
What a coincidence... they have so similar portfolio. After looking at
vendor prefixes that would be the first duplication of name.
To avoid conflict, how about: "admatecde"?
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: vendor-prefixes: Add Admatec AG
2019-07-26 10:02 ` Krzysztof Kozlowski
(?)
@ 2019-07-26 10:07 ` Schrempf Frieder
-1 siblings, 0 replies; 19+ messages in thread
From: Schrempf Frieder @ 2019-07-26 10:07 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Rob Herring, Mark Rutland, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
devicetree, linux-kernel, linux-arm-kernel
On 26.07.19 12:02, Krzysztof Kozlowski wrote:
> On Fri, 26 Jul 2019 at 11:48, Schrempf Frieder
> <frieder.schrempf@kontron.de> wrote:
>>
>> On 26.07.19 08:17, Krzysztof Kozlowski wrote:
>>> Add vendor prefix for Admatec AG.
>>
>> We get the displays used with the Kontron eval kits from "admatec GmbH"
>> in Hamburg, not "Admatec AG" in Switzerland. I think we have to
>> differentiate here.
>>
>> I will review patch 2/2 soon...
>
> What a coincidence... they have so similar portfolio. After looking at
> vendor prefixes that would be the first duplication of name.
I have no idea, whether they are related somehow or have a common history...
>
> To avoid conflict, how about: "admatecde"?
Would be ok, I guess.
>
> Best regards,
> Krzysztof
>
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: vendor-prefixes: Add Admatec AG
@ 2019-07-26 10:07 ` Schrempf Frieder
0 siblings, 0 replies; 19+ messages in thread
From: Schrempf Frieder @ 2019-07-26 10:07 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Rob Herring, Mark Rutland, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
devicetree, linux-kernel, linux-arm-kernel
On 26.07.19 12:02, Krzysztof Kozlowski wrote:
> On Fri, 26 Jul 2019 at 11:48, Schrempf Frieder
> <frieder.schrempf@kontron.de> wrote:
>>
>> On 26.07.19 08:17, Krzysztof Kozlowski wrote:
>>> Add vendor prefix for Admatec AG.
>>
>> We get the displays used with the Kontron eval kits from "admatec GmbH"
>> in Hamburg, not "Admatec AG" in Switzerland. I think we have to
>> differentiate here.
>>
>> I will review patch 2/2 soon...
>
> What a coincidence... they have so similar portfolio. After looking at
> vendor prefixes that would be the first duplication of name.
I have no idea, whether they are related somehow or have a common history...
>
> To avoid conflict, how about: "admatecde"?
Would be ok, I guess.
>
> Best regards,
> Krzysztof
>
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: vendor-prefixes: Add Admatec AG
@ 2019-07-26 10:07 ` Schrempf Frieder
0 siblings, 0 replies; 19+ messages in thread
From: Schrempf Frieder @ 2019-07-26 10:07 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Mark Rutland, devicetree, Shawn Guo, Sascha Hauer, linux-kernel,
Rob Herring, NXP Linux Team, Pengutronix Kernel Team,
Fabio Estevam, linux-arm-kernel
On 26.07.19 12:02, Krzysztof Kozlowski wrote:
> On Fri, 26 Jul 2019 at 11:48, Schrempf Frieder
> <frieder.schrempf@kontron.de> wrote:
>>
>> On 26.07.19 08:17, Krzysztof Kozlowski wrote:
>>> Add vendor prefix for Admatec AG.
>>
>> We get the displays used with the Kontron eval kits from "admatec GmbH"
>> in Hamburg, not "Admatec AG" in Switzerland. I think we have to
>> differentiate here.
>>
>> I will review patch 2/2 soon...
>
> What a coincidence... they have so similar portfolio. After looking at
> vendor prefixes that would be the first duplication of name.
I have no idea, whether they are related somehow or have a common history...
>
> To avoid conflict, how about: "admatecde"?
Would be ok, I guess.
>
> Best regards,
> Krzysztof
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v2 2/2] ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards
2019-07-26 6:17 ` Krzysztof Kozlowski
(?)
@ 2019-07-26 17:54 ` Fabio Estevam
-1 siblings, 0 replies; 19+ messages in thread
From: Fabio Estevam @ 2019-07-26 17:54 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Rob Herring, Mark Rutland, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, NXP Linux Team,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-kernel,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
Schrempf Frieder
Hi Krzysztof,
On Fri, Jul 26, 2019 at 3:17 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> index 7294ac36f4c0..afb61a55e26f 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> @@ -161,6 +161,10 @@ properties:
> items:
> - enum:
> - fsl,imx6ul-14x14-evk # i.MX6 UltraLite 14x14 EVK Board
> + - kontron,n6310-som # Kontron N6310 SOM
> + - kontron,n6310-s # Kontron N6310 S Board
> + - kontron,n6310-s-43 # Kontron N6310 S 43 Board
> + - kontron,n6310-s-50 # Kontron N6310 S 50 Board
These entries should be:
imx6ul-kontron-n6310-s.dtb
imx6ul-kontron-n6310-s-43.dtb
imx6ul-kontron-n6310-s-50.dtb
> + panel {
> + compatible = "admatec,t043c004800272t2a";
I do not find this binding documented.
> +&i2c4 {
> + gt911@5d {
Node names should be generic according to the devicetree spec, so:
touchscreen@5d
> + compatible = "goodix,gt928";
> + reg = <0x5d>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_cap_touch>;
> + interrupt-parent = <&gpio5>;
> + interrupts = <6 8>;
It would be better to use a laber to indicate the irq type:
interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
> + reset-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
> + irq-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
Active high?
Above you use "interrupts = <6 8>;" which means IRQ_TYPE_LEVEL_LOW.
> + };
> +};
> +
> +&iomuxc {
We tend to prefer putting iomuxc as the last node.
> + pinctrl_lcdif_dat: lcdifdatgrp {
> + fsl,pins = <
> + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
> + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
> + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
> + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
> + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
> + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
> + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
> + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
> + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
> + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
> + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
> + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
> + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
> + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
> + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
> + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
> + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
> + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
> + MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79
> + MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79
> + MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79
> + MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79
> + MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79
> + MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79
> + >;
> + };
> +
> + pinctrl_lcdif_ctrl: lcdifctrlgrp {
> + fsl,pins = <
> + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
> + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
> + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
> + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
> + MX6UL_PAD_LCD_RESET__LCDIF_RESET 0x79
> + >;
> + };
> +
> + pinctrl_cap_touch: captouchgrp {
> + fsl,pins = <
> + MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x1b0b0 /* Touch Interrupt */
> + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b0b0 /* Touch Reset */
> + MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x1b0b0 /* Touch Wake */
> + >;
> + };
> +
> + pinctrl_pwm7: pwm7grp {
> + fsl,pins = <
> + MX6UL_PAD_CSI_VSYNC__PWM7_OUT 0x110b0
> + >;
> + };
> +};
> +
> +&lcdif {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lcdif_dat
> + &pinctrl_lcdif_ctrl>;
Could fit into a single line.
> + panel {
> + compatible = "admatec,t070p133t0s301";
Same here. Undocumented binding.
> + backlight = <&backlight>;
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&display_out>;
> + };
> + };
> + };
> +};
> +
> +&i2c4 {
> + gt911@5d {
Same comments as previously apply.
> +
> + regulators {
No need to have this regulators indent level.
> + reg_3v3: regulator1 {
You can place this one directly. The preferred format is:
reg_3v3: regulator-reg-3v3 {
> +&ecspi1 {
> + fsl,spi-num-chipselects = <1>;
This property is obsoleted. Please remove it.
> + cs-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi1>;
> + status = "okay";
> +
> + fram@0 {
Generic name please. eeprom@0
> + compatible = "atmel,at25";
Please use the recommended compatible scheme as per
Documentation/devicetree/bindings/eeprom/at25.txt.
> + reg = <0>;
> + spi-max-frequency = <20000000>;
> + spi-cpha;
> + spi-cpol;
> + pagesize = <1>;
> + size = <8192>;
> + address-width = <16>;
> + };
> +};
> +&usbotg1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbotg1>;
> + dr_mode = "otg";
> + status = "okay";
We prefer to put the 'status' property as the last one.
> + srp-disable;
> + hnp-disable;
> + adp-disable;
> + vbus-supply = <®_usb_otg1_vbus>;
> +};
> +/ {
> + model = "Kontron N6310 SOM";
> + compatible = "kontron,n6310-som", "fsl,imx6ul";
> +
> + memory@80000000 {
device_type = "memory"; is missing here.
> + reg = <0x80000000 0x10000000>;
> + };
> +};
> +
> +&cpu0 {
> + clock-frequency = <528000000>;
Is this one really needed?
> +&ecspi2 {
> + cs-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi2>;
> + status = "okay";
> +
> + flash: mx25v80@0 {
spi-flash@0
> +&qspi {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_qspi>;
> + status = "okay";
> +
> + flash0: w25m02gv@0 {
generic name, please.
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v2 2/2] ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards
@ 2019-07-26 17:54 ` Fabio Estevam
0 siblings, 0 replies; 19+ messages in thread
From: Fabio Estevam @ 2019-07-26 17:54 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Mark Rutland,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Sascha Hauer, linux-kernel, Schrempf Frieder, Rob Herring,
NXP Linux Team, Pengutronix Kernel Team, Shawn Guo,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
Hi Krzysztof,
On Fri, Jul 26, 2019 at 3:17 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> index 7294ac36f4c0..afb61a55e26f 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> @@ -161,6 +161,10 @@ properties:
> items:
> - enum:
> - fsl,imx6ul-14x14-evk # i.MX6 UltraLite 14x14 EVK Board
> + - kontron,n6310-som # Kontron N6310 SOM
> + - kontron,n6310-s # Kontron N6310 S Board
> + - kontron,n6310-s-43 # Kontron N6310 S 43 Board
> + - kontron,n6310-s-50 # Kontron N6310 S 50 Board
These entries should be:
imx6ul-kontron-n6310-s.dtb
imx6ul-kontron-n6310-s-43.dtb
imx6ul-kontron-n6310-s-50.dtb
> + panel {
> + compatible = "admatec,t043c004800272t2a";
I do not find this binding documented.
> +&i2c4 {
> + gt911@5d {
Node names should be generic according to the devicetree spec, so:
touchscreen@5d
> + compatible = "goodix,gt928";
> + reg = <0x5d>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_cap_touch>;
> + interrupt-parent = <&gpio5>;
> + interrupts = <6 8>;
It would be better to use a laber to indicate the irq type:
interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
> + reset-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
> + irq-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
Active high?
Above you use "interrupts = <6 8>;" which means IRQ_TYPE_LEVEL_LOW.
> + };
> +};
> +
> +&iomuxc {
We tend to prefer putting iomuxc as the last node.
> + pinctrl_lcdif_dat: lcdifdatgrp {
> + fsl,pins = <
> + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
> + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
> + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
> + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
> + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
> + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
> + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
> + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
> + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
> + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
> + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
> + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
> + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
> + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
> + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
> + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
> + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
> + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
> + MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79
> + MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79
> + MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79
> + MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79
> + MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79
> + MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79
> + >;
> + };
> +
> + pinctrl_lcdif_ctrl: lcdifctrlgrp {
> + fsl,pins = <
> + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
> + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
> + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
> + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
> + MX6UL_PAD_LCD_RESET__LCDIF_RESET 0x79
> + >;
> + };
> +
> + pinctrl_cap_touch: captouchgrp {
> + fsl,pins = <
> + MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x1b0b0 /* Touch Interrupt */
> + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b0b0 /* Touch Reset */
> + MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x1b0b0 /* Touch Wake */
> + >;
> + };
> +
> + pinctrl_pwm7: pwm7grp {
> + fsl,pins = <
> + MX6UL_PAD_CSI_VSYNC__PWM7_OUT 0x110b0
> + >;
> + };
> +};
> +
> +&lcdif {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lcdif_dat
> + &pinctrl_lcdif_ctrl>;
Could fit into a single line.
> + panel {
> + compatible = "admatec,t070p133t0s301";
Same here. Undocumented binding.
> + backlight = <&backlight>;
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&display_out>;
> + };
> + };
> + };
> +};
> +
> +&i2c4 {
> + gt911@5d {
Same comments as previously apply.
> +
> + regulators {
No need to have this regulators indent level.
> + reg_3v3: regulator1 {
You can place this one directly. The preferred format is:
reg_3v3: regulator-reg-3v3 {
> +&ecspi1 {
> + fsl,spi-num-chipselects = <1>;
This property is obsoleted. Please remove it.
> + cs-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi1>;
> + status = "okay";
> +
> + fram@0 {
Generic name please. eeprom@0
> + compatible = "atmel,at25";
Please use the recommended compatible scheme as per
Documentation/devicetree/bindings/eeprom/at25.txt.
> + reg = <0>;
> + spi-max-frequency = <20000000>;
> + spi-cpha;
> + spi-cpol;
> + pagesize = <1>;
> + size = <8192>;
> + address-width = <16>;
> + };
> +};
> +&usbotg1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbotg1>;
> + dr_mode = "otg";
> + status = "okay";
We prefer to put the 'status' property as the last one.
> + srp-disable;
> + hnp-disable;
> + adp-disable;
> + vbus-supply = <®_usb_otg1_vbus>;
> +};
> +/ {
> + model = "Kontron N6310 SOM";
> + compatible = "kontron,n6310-som", "fsl,imx6ul";
> +
> + memory@80000000 {
device_type = "memory"; is missing here.
> + reg = <0x80000000 0x10000000>;
> + };
> +};
> +
> +&cpu0 {
> + clock-frequency = <528000000>;
Is this one really needed?
> +&ecspi2 {
> + cs-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi2>;
> + status = "okay";
> +
> + flash: mx25v80@0 {
spi-flash@0
> +&qspi {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_qspi>;
> + status = "okay";
> +
> + flash0: w25m02gv@0 {
generic name, please.
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v2 2/2] ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards
@ 2019-07-26 17:54 ` Fabio Estevam
0 siblings, 0 replies; 19+ messages in thread
From: Fabio Estevam @ 2019-07-26 17:54 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Mark Rutland,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Sascha Hauer, linux-kernel, Schrempf Frieder, Rob Herring,
NXP Linux Team, Pengutronix Kernel Team, Shawn Guo,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
Hi Krzysztof,
On Fri, Jul 26, 2019 at 3:17 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> index 7294ac36f4c0..afb61a55e26f 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> @@ -161,6 +161,10 @@ properties:
> items:
> - enum:
> - fsl,imx6ul-14x14-evk # i.MX6 UltraLite 14x14 EVK Board
> + - kontron,n6310-som # Kontron N6310 SOM
> + - kontron,n6310-s # Kontron N6310 S Board
> + - kontron,n6310-s-43 # Kontron N6310 S 43 Board
> + - kontron,n6310-s-50 # Kontron N6310 S 50 Board
These entries should be:
imx6ul-kontron-n6310-s.dtb
imx6ul-kontron-n6310-s-43.dtb
imx6ul-kontron-n6310-s-50.dtb
> + panel {
> + compatible = "admatec,t043c004800272t2a";
I do not find this binding documented.
> +&i2c4 {
> + gt911@5d {
Node names should be generic according to the devicetree spec, so:
touchscreen@5d
> + compatible = "goodix,gt928";
> + reg = <0x5d>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_cap_touch>;
> + interrupt-parent = <&gpio5>;
> + interrupts = <6 8>;
It would be better to use a laber to indicate the irq type:
interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
> + reset-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
> + irq-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
Active high?
Above you use "interrupts = <6 8>;" which means IRQ_TYPE_LEVEL_LOW.
> + };
> +};
> +
> +&iomuxc {
We tend to prefer putting iomuxc as the last node.
> + pinctrl_lcdif_dat: lcdifdatgrp {
> + fsl,pins = <
> + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
> + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
> + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
> + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
> + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
> + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
> + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
> + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
> + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
> + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
> + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
> + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
> + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
> + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
> + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
> + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
> + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
> + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
> + MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79
> + MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79
> + MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79
> + MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79
> + MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79
> + MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79
> + >;
> + };
> +
> + pinctrl_lcdif_ctrl: lcdifctrlgrp {
> + fsl,pins = <
> + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
> + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
> + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
> + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
> + MX6UL_PAD_LCD_RESET__LCDIF_RESET 0x79
> + >;
> + };
> +
> + pinctrl_cap_touch: captouchgrp {
> + fsl,pins = <
> + MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x1b0b0 /* Touch Interrupt */
> + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b0b0 /* Touch Reset */
> + MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x1b0b0 /* Touch Wake */
> + >;
> + };
> +
> + pinctrl_pwm7: pwm7grp {
> + fsl,pins = <
> + MX6UL_PAD_CSI_VSYNC__PWM7_OUT 0x110b0
> + >;
> + };
> +};
> +
> +&lcdif {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lcdif_dat
> + &pinctrl_lcdif_ctrl>;
Could fit into a single line.
> + panel {
> + compatible = "admatec,t070p133t0s301";
Same here. Undocumented binding.
> + backlight = <&backlight>;
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&display_out>;
> + };
> + };
> + };
> +};
> +
> +&i2c4 {
> + gt911@5d {
Same comments as previously apply.
> +
> + regulators {
No need to have this regulators indent level.
> + reg_3v3: regulator1 {
You can place this one directly. The preferred format is:
reg_3v3: regulator-reg-3v3 {
> +&ecspi1 {
> + fsl,spi-num-chipselects = <1>;
This property is obsoleted. Please remove it.
> + cs-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi1>;
> + status = "okay";
> +
> + fram@0 {
Generic name please. eeprom@0
> + compatible = "atmel,at25";
Please use the recommended compatible scheme as per
Documentation/devicetree/bindings/eeprom/at25.txt.
> + reg = <0>;
> + spi-max-frequency = <20000000>;
> + spi-cpha;
> + spi-cpol;
> + pagesize = <1>;
> + size = <8192>;
> + address-width = <16>;
> + };
> +};
> +&usbotg1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbotg1>;
> + dr_mode = "otg";
> + status = "okay";
We prefer to put the 'status' property as the last one.
> + srp-disable;
> + hnp-disable;
> + adp-disable;
> + vbus-supply = <®_usb_otg1_vbus>;
> +};
> +/ {
> + model = "Kontron N6310 SOM";
> + compatible = "kontron,n6310-som", "fsl,imx6ul";
> +
> + memory@80000000 {
device_type = "memory"; is missing here.
> + reg = <0x80000000 0x10000000>;
> + };
> +};
> +
> +&cpu0 {
> + clock-frequency = <528000000>;
Is this one really needed?
> +&ecspi2 {
> + cs-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi2>;
> + status = "okay";
> +
> + flash: mx25v80@0 {
spi-flash@0
> +&qspi {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_qspi>;
> + status = "okay";
> +
> + flash0: w25m02gv@0 {
generic name, please.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v2 2/2] ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards
2019-07-26 17:54 ` Fabio Estevam
(?)
@ 2019-07-27 12:57 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 19+ messages in thread
From: Krzysztof Kozlowski @ 2019-07-27 12:57 UTC (permalink / raw)
To: Fabio Estevam
Cc: Rob Herring, Mark Rutland, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, NXP Linux Team,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-kernel,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
Schrempf Frieder
On Fri, Jul 26, 2019 at 02:54:20PM -0300, Fabio Estevam wrote:
> Hi Krzysztof,
>
> On Fri, Jul 26, 2019 at 3:17 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> > diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> > index 7294ac36f4c0..afb61a55e26f 100644
> > --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> > +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> > @@ -161,6 +161,10 @@ properties:
> > items:
> > - enum:
> > - fsl,imx6ul-14x14-evk # i.MX6 UltraLite 14x14 EVK Board
> > + - kontron,n6310-som # Kontron N6310 SOM
> > + - kontron,n6310-s # Kontron N6310 S Board
> > + - kontron,n6310-s-43 # Kontron N6310 S 43 Board
> > + - kontron,n6310-s-50 # Kontron N6310 S 50 Board
>
> These entries should be:
> imx6ul-kontron-n6310-s.dtb
> imx6ul-kontron-n6310-s-43.dtb
> imx6ul-kontron-n6310-s-50.dtb
OK
(I'll apply all your suggestions without and just reply here where there
is some discussion)
>
> > + panel {
> > + compatible = "admatec,t043c004800272t2a";
>
> I do not find this binding documented.
Because they are not... I mentioned it in commit msg - there are no
driver and bindings for them. I put them for completness of HW
description.
>
> > +&i2c4 {
> > + gt911@5d {
>
> Node names should be generic according to the devicetree spec, so:
>
> touchscreen@5d
>
> > + compatible = "goodix,gt928";
> > + reg = <0x5d>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_cap_touch>;
> > + interrupt-parent = <&gpio5>;
> > + interrupts = <6 8>;
>
> It would be better to use a laber to indicate the irq type:
>
> interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
Indeed.
>
> > + reset-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
> > + irq-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
>
> Active high?
>
> Above you use "interrupts = <6 8>;" which means IRQ_TYPE_LEVEL_LOW.
Yes, it is confusing but it looks correct. The driver does not use the
GPIO flag so ACTIVE_HIGH or any other setting does not have effect.
Driver uses this pin (as active high) after disabling the interrupts as
an additional reset pin during resume. After this additional reset, it
serves back as interrupt pin.
>
> > + };
> > +};
> > +
> > +&iomuxc {
>
> We tend to prefer putting iomuxc as the last node.
>
> > + pinctrl_lcdif_dat: lcdifdatgrp {
> > + fsl,pins = <
> > + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
> > + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
> > + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
> > + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
> > + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
> > + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
> > + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
> > + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
> > + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
> > + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
> > + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
> > + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
> > + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
> > + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
> > + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
> > + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
> > + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
> > + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
> > + MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79
> > + MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79
> > + MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79
> > + MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79
> > + MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79
> > + MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79
> > + >;
> > + };
> > +
> > + pinctrl_lcdif_ctrl: lcdifctrlgrp {
> > + fsl,pins = <
> > + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
> > + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
> > + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
> > + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
> > + MX6UL_PAD_LCD_RESET__LCDIF_RESET 0x79
> > + >;
> > + };
> > +
> > + pinctrl_cap_touch: captouchgrp {
> > + fsl,pins = <
> > + MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x1b0b0 /* Touch Interrupt */
> > + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b0b0 /* Touch Reset */
> > + MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x1b0b0 /* Touch Wake */
> > + >;
> > + };
> > +
> > + pinctrl_pwm7: pwm7grp {
> > + fsl,pins = <
> > + MX6UL_PAD_CSI_VSYNC__PWM7_OUT 0x110b0
> > + >;
> > + };
> > +};
> > +
> > +&lcdif {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_lcdif_dat
> > + &pinctrl_lcdif_ctrl>;
>
> Could fit into a single line.
>
> > + panel {
> > + compatible = "admatec,t070p133t0s301";
>
> Same here. Undocumented binding.
>
> > + backlight = <&backlight>;
> > +
> > + port {
> > + panel_in: endpoint {
> > + remote-endpoint = <&display_out>;
> > + };
> > + };
> > + };
> > +};
> > +
> > +&i2c4 {
> > + gt911@5d {
>
> Same comments as previously apply.
>
> > +
> > + regulators {
>
> No need to have this regulators indent level.
>
> > + reg_3v3: regulator1 {
>
> You can place this one directly. The preferred format is:
>
> reg_3v3: regulator-reg-3v3 {
>
> > +&ecspi1 {
> > + fsl,spi-num-chipselects = <1>;
>
> This property is obsoleted. Please remove it.
>
> > + cs-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_ecspi1>;
> > + status = "okay";
> > +
> > + fram@0 {
>
> Generic name please. eeprom@0
>
> > + compatible = "atmel,at25";
>
> Please use the recommended compatible scheme as per
> Documentation/devicetree/bindings/eeprom/at25.txt.
>
> > + reg = <0>;
> > + spi-max-frequency = <20000000>;
> > + spi-cpha;
> > + spi-cpol;
> > + pagesize = <1>;
> > + size = <8192>;
> > + address-width = <16>;
> > + };
> > +};
>
>
> > +&usbotg1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_usbotg1>;
> > + dr_mode = "otg";
> > + status = "okay";
>
> We prefer to put the 'status' property as the last one.
>
> > + srp-disable;
> > + hnp-disable;
> > + adp-disable;
> > + vbus-supply = <®_usb_otg1_vbus>;
> > +};
>
> > +/ {
> > + model = "Kontron N6310 SOM";
> > + compatible = "kontron,n6310-som", "fsl,imx6ul";
> > +
> > + memory@80000000 {
>
> device_type = "memory"; is missing here.
>
> > + reg = <0x80000000 0x10000000>;
> > + };
> > +};
> > +
> > +&cpu0 {
> > + clock-frequency = <528000000>;
>
> Is this one really needed?
I'll check.
>
> > +&ecspi2 {
> > + cs-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_ecspi2>;
> > + status = "okay";
> > +
> > + flash: mx25v80@0 {
>
> spi-flash@0
>
> > +&qspi {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_qspi>;
> > + status = "okay";
> > +
> > + flash0: w25m02gv@0 {
>
> generic name, please.
Thanks for review!
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v2 2/2] ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards
@ 2019-07-27 12:57 ` Krzysztof Kozlowski
0 siblings, 0 replies; 19+ messages in thread
From: Krzysztof Kozlowski @ 2019-07-27 12:57 UTC (permalink / raw)
To: Fabio Estevam
Cc: Rob Herring, Mark Rutland, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, NXP Linux Team,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-kernel,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
Schrempf Frieder
On Fri, Jul 26, 2019 at 02:54:20PM -0300, Fabio Estevam wrote:
> Hi Krzysztof,
>
> On Fri, Jul 26, 2019 at 3:17 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> > diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> > index 7294ac36f4c0..afb61a55e26f 100644
> > --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> > +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> > @@ -161,6 +161,10 @@ properties:
> > items:
> > - enum:
> > - fsl,imx6ul-14x14-evk # i.MX6 UltraLite 14x14 EVK Board
> > + - kontron,n6310-som # Kontron N6310 SOM
> > + - kontron,n6310-s # Kontron N6310 S Board
> > + - kontron,n6310-s-43 # Kontron N6310 S 43 Board
> > + - kontron,n6310-s-50 # Kontron N6310 S 50 Board
>
> These entries should be:
> imx6ul-kontron-n6310-s.dtb
> imx6ul-kontron-n6310-s-43.dtb
> imx6ul-kontron-n6310-s-50.dtb
OK
(I'll apply all your suggestions without and just reply here where there
is some discussion)
>
> > + panel {
> > + compatible = "admatec,t043c004800272t2a";
>
> I do not find this binding documented.
Because they are not... I mentioned it in commit msg - there are no
driver and bindings for them. I put them for completness of HW
description.
>
> > +&i2c4 {
> > + gt911@5d {
>
> Node names should be generic according to the devicetree spec, so:
>
> touchscreen@5d
>
> > + compatible = "goodix,gt928";
> > + reg = <0x5d>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_cap_touch>;
> > + interrupt-parent = <&gpio5>;
> > + interrupts = <6 8>;
>
> It would be better to use a laber to indicate the irq type:
>
> interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
Indeed.
>
> > + reset-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
> > + irq-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
>
> Active high?
>
> Above you use "interrupts = <6 8>;" which means IRQ_TYPE_LEVEL_LOW.
Yes, it is confusing but it looks correct. The driver does not use the
GPIO flag so ACTIVE_HIGH or any other setting does not have effect.
Driver uses this pin (as active high) after disabling the interrupts as
an additional reset pin during resume. After this additional reset, it
serves back as interrupt pin.
>
> > + };
> > +};
> > +
> > +&iomuxc {
>
> We tend to prefer putting iomuxc as the last node.
>
> > + pinctrl_lcdif_dat: lcdifdatgrp {
> > + fsl,pins = <
> > + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
> > + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
> > + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
> > + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
> > + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
> > + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
> > + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
> > + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
> > + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
> > + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
> > + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
> > + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
> > + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
> > + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
> > + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
> > + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
> > + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
> > + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
> > + MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79
> > + MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79
> > + MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79
> > + MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79
> > + MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79
> > + MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79
> > + >;
> > + };
> > +
> > + pinctrl_lcdif_ctrl: lcdifctrlgrp {
> > + fsl,pins = <
> > + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
> > + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
> > + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
> > + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
> > + MX6UL_PAD_LCD_RESET__LCDIF_RESET 0x79
> > + >;
> > + };
> > +
> > + pinctrl_cap_touch: captouchgrp {
> > + fsl,pins = <
> > + MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x1b0b0 /* Touch Interrupt */
> > + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b0b0 /* Touch Reset */
> > + MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x1b0b0 /* Touch Wake */
> > + >;
> > + };
> > +
> > + pinctrl_pwm7: pwm7grp {
> > + fsl,pins = <
> > + MX6UL_PAD_CSI_VSYNC__PWM7_OUT 0x110b0
> > + >;
> > + };
> > +};
> > +
> > +&lcdif {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_lcdif_dat
> > + &pinctrl_lcdif_ctrl>;
>
> Could fit into a single line.
>
> > + panel {
> > + compatible = "admatec,t070p133t0s301";
>
> Same here. Undocumented binding.
>
> > + backlight = <&backlight>;
> > +
> > + port {
> > + panel_in: endpoint {
> > + remote-endpoint = <&display_out>;
> > + };
> > + };
> > + };
> > +};
> > +
> > +&i2c4 {
> > + gt911@5d {
>
> Same comments as previously apply.
>
> > +
> > + regulators {
>
> No need to have this regulators indent level.
>
> > + reg_3v3: regulator1 {
>
> You can place this one directly. The preferred format is:
>
> reg_3v3: regulator-reg-3v3 {
>
> > +&ecspi1 {
> > + fsl,spi-num-chipselects = <1>;
>
> This property is obsoleted. Please remove it.
>
> > + cs-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_ecspi1>;
> > + status = "okay";
> > +
> > + fram@0 {
>
> Generic name please. eeprom@0
>
> > + compatible = "atmel,at25";
>
> Please use the recommended compatible scheme as per
> Documentation/devicetree/bindings/eeprom/at25.txt.
>
> > + reg = <0>;
> > + spi-max-frequency = <20000000>;
> > + spi-cpha;
> > + spi-cpol;
> > + pagesize = <1>;
> > + size = <8192>;
> > + address-width = <16>;
> > + };
> > +};
>
>
> > +&usbotg1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_usbotg1>;
> > + dr_mode = "otg";
> > + status = "okay";
>
> We prefer to put the 'status' property as the last one.
>
> > + srp-disable;
> > + hnp-disable;
> > + adp-disable;
> > + vbus-supply = <®_usb_otg1_vbus>;
> > +};
>
> > +/ {
> > + model = "Kontron N6310 SOM";
> > + compatible = "kontron,n6310-som", "fsl,imx6ul";
> > +
> > + memory@80000000 {
>
> device_type = "memory"; is missing here.
>
> > + reg = <0x80000000 0x10000000>;
> > + };
> > +};
> > +
> > +&cpu0 {
> > + clock-frequency = <528000000>;
>
> Is this one really needed?
I'll check.
>
> > +&ecspi2 {
> > + cs-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_ecspi2>;
> > + status = "okay";
> > +
> > + flash: mx25v80@0 {
>
> spi-flash@0
>
> > +&qspi {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_qspi>;
> > + status = "okay";
> > +
> > + flash0: w25m02gv@0 {
>
> generic name, please.
Thanks for review!
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v2 2/2] ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards
@ 2019-07-27 12:57 ` Krzysztof Kozlowski
0 siblings, 0 replies; 19+ messages in thread
From: Krzysztof Kozlowski @ 2019-07-27 12:57 UTC (permalink / raw)
To: Fabio Estevam
Cc: Mark Rutland,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Sascha Hauer, linux-kernel, Schrempf Frieder, Rob Herring,
NXP Linux Team, Pengutronix Kernel Team, Shawn Guo,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
On Fri, Jul 26, 2019 at 02:54:20PM -0300, Fabio Estevam wrote:
> Hi Krzysztof,
>
> On Fri, Jul 26, 2019 at 3:17 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> > diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> > index 7294ac36f4c0..afb61a55e26f 100644
> > --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> > +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> > @@ -161,6 +161,10 @@ properties:
> > items:
> > - enum:
> > - fsl,imx6ul-14x14-evk # i.MX6 UltraLite 14x14 EVK Board
> > + - kontron,n6310-som # Kontron N6310 SOM
> > + - kontron,n6310-s # Kontron N6310 S Board
> > + - kontron,n6310-s-43 # Kontron N6310 S 43 Board
> > + - kontron,n6310-s-50 # Kontron N6310 S 50 Board
>
> These entries should be:
> imx6ul-kontron-n6310-s.dtb
> imx6ul-kontron-n6310-s-43.dtb
> imx6ul-kontron-n6310-s-50.dtb
OK
(I'll apply all your suggestions without and just reply here where there
is some discussion)
>
> > + panel {
> > + compatible = "admatec,t043c004800272t2a";
>
> I do not find this binding documented.
Because they are not... I mentioned it in commit msg - there are no
driver and bindings for them. I put them for completness of HW
description.
>
> > +&i2c4 {
> > + gt911@5d {
>
> Node names should be generic according to the devicetree spec, so:
>
> touchscreen@5d
>
> > + compatible = "goodix,gt928";
> > + reg = <0x5d>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_cap_touch>;
> > + interrupt-parent = <&gpio5>;
> > + interrupts = <6 8>;
>
> It would be better to use a laber to indicate the irq type:
>
> interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
Indeed.
>
> > + reset-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
> > + irq-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
>
> Active high?
>
> Above you use "interrupts = <6 8>;" which means IRQ_TYPE_LEVEL_LOW.
Yes, it is confusing but it looks correct. The driver does not use the
GPIO flag so ACTIVE_HIGH or any other setting does not have effect.
Driver uses this pin (as active high) after disabling the interrupts as
an additional reset pin during resume. After this additional reset, it
serves back as interrupt pin.
>
> > + };
> > +};
> > +
> > +&iomuxc {
>
> We tend to prefer putting iomuxc as the last node.
>
> > + pinctrl_lcdif_dat: lcdifdatgrp {
> > + fsl,pins = <
> > + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
> > + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
> > + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
> > + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
> > + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
> > + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
> > + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
> > + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
> > + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
> > + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
> > + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
> > + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
> > + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
> > + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
> > + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
> > + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
> > + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
> > + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
> > + MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79
> > + MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79
> > + MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79
> > + MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79
> > + MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79
> > + MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79
> > + >;
> > + };
> > +
> > + pinctrl_lcdif_ctrl: lcdifctrlgrp {
> > + fsl,pins = <
> > + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
> > + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
> > + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
> > + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
> > + MX6UL_PAD_LCD_RESET__LCDIF_RESET 0x79
> > + >;
> > + };
> > +
> > + pinctrl_cap_touch: captouchgrp {
> > + fsl,pins = <
> > + MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x1b0b0 /* Touch Interrupt */
> > + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b0b0 /* Touch Reset */
> > + MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x1b0b0 /* Touch Wake */
> > + >;
> > + };
> > +
> > + pinctrl_pwm7: pwm7grp {
> > + fsl,pins = <
> > + MX6UL_PAD_CSI_VSYNC__PWM7_OUT 0x110b0
> > + >;
> > + };
> > +};
> > +
> > +&lcdif {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_lcdif_dat
> > + &pinctrl_lcdif_ctrl>;
>
> Could fit into a single line.
>
> > + panel {
> > + compatible = "admatec,t070p133t0s301";
>
> Same here. Undocumented binding.
>
> > + backlight = <&backlight>;
> > +
> > + port {
> > + panel_in: endpoint {
> > + remote-endpoint = <&display_out>;
> > + };
> > + };
> > + };
> > +};
> > +
> > +&i2c4 {
> > + gt911@5d {
>
> Same comments as previously apply.
>
> > +
> > + regulators {
>
> No need to have this regulators indent level.
>
> > + reg_3v3: regulator1 {
>
> You can place this one directly. The preferred format is:
>
> reg_3v3: regulator-reg-3v3 {
>
> > +&ecspi1 {
> > + fsl,spi-num-chipselects = <1>;
>
> This property is obsoleted. Please remove it.
>
> > + cs-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_ecspi1>;
> > + status = "okay";
> > +
> > + fram@0 {
>
> Generic name please. eeprom@0
>
> > + compatible = "atmel,at25";
>
> Please use the recommended compatible scheme as per
> Documentation/devicetree/bindings/eeprom/at25.txt.
>
> > + reg = <0>;
> > + spi-max-frequency = <20000000>;
> > + spi-cpha;
> > + spi-cpol;
> > + pagesize = <1>;
> > + size = <8192>;
> > + address-width = <16>;
> > + };
> > +};
>
>
> > +&usbotg1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_usbotg1>;
> > + dr_mode = "otg";
> > + status = "okay";
>
> We prefer to put the 'status' property as the last one.
>
> > + srp-disable;
> > + hnp-disable;
> > + adp-disable;
> > + vbus-supply = <®_usb_otg1_vbus>;
> > +};
>
> > +/ {
> > + model = "Kontron N6310 SOM";
> > + compatible = "kontron,n6310-som", "fsl,imx6ul";
> > +
> > + memory@80000000 {
>
> device_type = "memory"; is missing here.
>
> > + reg = <0x80000000 0x10000000>;
> > + };
> > +};
> > +
> > +&cpu0 {
> > + clock-frequency = <528000000>;
>
> Is this one really needed?
I'll check.
>
> > +&ecspi2 {
> > + cs-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_ecspi2>;
> > + status = "okay";
> > +
> > + flash: mx25v80@0 {
>
> spi-flash@0
>
> > +&qspi {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_qspi>;
> > + status = "okay";
> > +
> > + flash0: w25m02gv@0 {
>
> generic name, please.
Thanks for review!
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 19+ messages in thread
end of thread, other threads:[~2019-07-27 12:58 UTC | newest]
Thread overview: 19+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-26 6:17 [PATCH v2 1/2] dt-bindings: vendor-prefixes: Add Admatec AG Krzysztof Kozlowski
2019-07-26 6:17 ` Krzysztof Kozlowski
2019-07-26 6:17 ` [PATCH v2 2/2] ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards Krzysztof Kozlowski
2019-07-26 6:17 ` Krzysztof Kozlowski
2019-07-26 17:54 ` Fabio Estevam
2019-07-26 17:54 ` Fabio Estevam
2019-07-26 17:54 ` Fabio Estevam
2019-07-27 12:57 ` Krzysztof Kozlowski
2019-07-27 12:57 ` Krzysztof Kozlowski
2019-07-27 12:57 ` Krzysztof Kozlowski
2019-07-26 9:48 ` [PATCH v2 1/2] dt-bindings: vendor-prefixes: Add Admatec AG Schrempf Frieder
2019-07-26 9:48 ` Schrempf Frieder
2019-07-26 9:48 ` Schrempf Frieder
2019-07-26 10:02 ` Krzysztof Kozlowski
2019-07-26 10:02 ` Krzysztof Kozlowski
2019-07-26 10:02 ` Krzysztof Kozlowski
2019-07-26 10:07 ` Schrempf Frieder
2019-07-26 10:07 ` Schrempf Frieder
2019-07-26 10:07 ` Schrempf Frieder
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.