From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Vivek Gautam <vivek.gautam@codeaurora.org>
Cc: agross@kernel.org, robh+dt@kernel.org, will.deacon@arm.com,
robin.murphy@arm.com, joro@8bytes.org,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
iommu@lists.linux-foundation.org, linux-kernel@vger.kernel.org,
david.brown@linaro.org
Subject: Re: [PATCH v3 4/4] arm64: dts/sdm845: Enable FW implemented safe sequence handler on MTP
Date: Mon, 5 Aug 2019 15:26:27 -0700 [thread overview]
Message-ID: <20190805222627.GA2634@builder> (raw)
In-Reply-To: <20190612071554.13573-5-vivek.gautam@codeaurora.org>
On Wed 12 Jun 00:15 PDT 2019, Vivek Gautam wrote:
> Indicate on MTP SDM845 that firmware implements handler to
> TLB invalidate erratum SCM call where SAFE sequence is toggled
> to achieve optimum performance on real-time clients, such as
> display and camera.
>
> Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
> ---
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 78ec373a2b18..6a73d9744a71 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -2368,6 +2368,7 @@
> compatible = "qcom,sdm845-smmu-500", "arm,mmu-500";
> reg = <0 0x15000000 0 0x80000>;
> #iommu-cells = <2>;
> + qcom,smmu-500-fw-impl-safe-errata;
Looked back at this series and started to wonder if there there is a
case where this should not be set? I mean we're after all adding this to
the top 845 dtsi...
How about making it the default in the driver and opt out of the errata
once there is a need?
Regards,
Bjorn
> #global-interrupts = <1>;
> interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>
WARNING: multiple messages have this Message-ID (diff)
From: Bjorn Andersson <bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: Vivek Gautam <vivek.gautam-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
will.deacon-5wv7dgnIgG8@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
david.brown-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org,
agross-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
robin.murphy-5wv7dgnIgG8@public.gmane.org
Subject: Re: [PATCH v3 4/4] arm64: dts/sdm845: Enable FW implemented safe sequence handler on MTP
Date: Mon, 5 Aug 2019 15:26:27 -0700 [thread overview]
Message-ID: <20190805222627.GA2634@builder> (raw)
In-Reply-To: <20190612071554.13573-5-vivek.gautam-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
On Wed 12 Jun 00:15 PDT 2019, Vivek Gautam wrote:
> Indicate on MTP SDM845 that firmware implements handler to
> TLB invalidate erratum SCM call where SAFE sequence is toggled
> to achieve optimum performance on real-time clients, such as
> display and camera.
>
> Signed-off-by: Vivek Gautam <vivek.gautam-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
> ---
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 78ec373a2b18..6a73d9744a71 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -2368,6 +2368,7 @@
> compatible = "qcom,sdm845-smmu-500", "arm,mmu-500";
> reg = <0 0x15000000 0 0x80000>;
> #iommu-cells = <2>;
> + qcom,smmu-500-fw-impl-safe-errata;
Looked back at this series and started to wonder if there there is a
case where this should not be set? I mean we're after all adding this to
the top 845 dtsi...
How about making it the default in the driver and opt out of the errata
once there is a need?
Regards,
Bjorn
> #global-interrupts = <1>;
> interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>
WARNING: multiple messages have this Message-ID (diff)
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Vivek Gautam <vivek.gautam@codeaurora.org>
Cc: devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
will.deacon@arm.com, linux-kernel@vger.kernel.org,
robh+dt@kernel.org, david.brown@linaro.org,
iommu@lists.linux-foundation.org, agross@kernel.org,
robin.murphy@arm.com
Subject: Re: [PATCH v3 4/4] arm64: dts/sdm845: Enable FW implemented safe sequence handler on MTP
Date: Mon, 5 Aug 2019 15:26:27 -0700 [thread overview]
Message-ID: <20190805222627.GA2634@builder> (raw)
In-Reply-To: <20190612071554.13573-5-vivek.gautam@codeaurora.org>
On Wed 12 Jun 00:15 PDT 2019, Vivek Gautam wrote:
> Indicate on MTP SDM845 that firmware implements handler to
> TLB invalidate erratum SCM call where SAFE sequence is toggled
> to achieve optimum performance on real-time clients, such as
> display and camera.
>
> Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
> ---
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 78ec373a2b18..6a73d9744a71 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -2368,6 +2368,7 @@
> compatible = "qcom,sdm845-smmu-500", "arm,mmu-500";
> reg = <0 0x15000000 0 0x80000>;
> #iommu-cells = <2>;
> + qcom,smmu-500-fw-impl-safe-errata;
Looked back at this series and started to wonder if there there is a
case where this should not be set? I mean we're after all adding this to
the top 845 dtsi...
How about making it the default in the driver and opt out of the errata
once there is a need?
Regards,
Bjorn
> #global-interrupts = <1>;
> interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
next prev parent reply other threads:[~2019-08-05 22:26 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-12 7:15 [PATCH v3 0/4] Qcom smmu-500 wait-for-safe handling for sdm845 Vivek Gautam
2019-06-12 7:15 ` Vivek Gautam
2019-06-12 7:15 ` [PATCH v3 1/4] firmware: qcom_scm-64: Add atomic version of qcom_scm_call Vivek Gautam
2019-06-12 7:15 ` Vivek Gautam
2019-06-18 17:55 ` Will Deacon
2019-06-18 17:55 ` Will Deacon
2019-06-19 11:34 ` Vivek Gautam
2019-06-19 11:34 ` Vivek Gautam
2019-06-19 11:34 ` Vivek Gautam
2019-08-05 22:27 ` Bjorn Andersson
2019-08-05 22:27 ` Bjorn Andersson
2019-08-05 22:27 ` Bjorn Andersson
2019-08-08 11:35 ` Vivek Gautam
2019-08-08 11:35 ` Vivek Gautam
2019-08-08 11:35 ` Vivek Gautam
2019-08-08 16:30 ` Will Deacon
2019-08-08 16:30 ` Will Deacon
2019-08-08 16:30 ` Will Deacon
2019-06-12 7:15 ` [PATCH v3 2/4] firmware/qcom_scm: Add scm call to handle smmu errata Vivek Gautam
2019-06-12 7:15 ` Vivek Gautam
2019-06-12 7:15 ` [PATCH v3 3/4] iommu/arm-smmu: Add support to handle Qcom's wait-for-safe logic Vivek Gautam
2019-06-12 7:15 ` Vivek Gautam
2019-06-14 4:05 ` Bjorn Andersson
2019-06-14 4:05 ` Bjorn Andersson
2019-06-14 4:05 ` Bjorn Andersson
2019-06-14 9:18 ` Vivek Gautam
2019-06-14 9:18 ` Vivek Gautam
2019-06-18 17:52 ` Will Deacon
2019-06-18 17:52 ` Will Deacon
2019-06-24 10:28 ` Vivek Gautam
2019-06-24 10:28 ` Vivek Gautam
2019-06-24 10:28 ` Vivek Gautam
2019-06-24 17:03 ` Will Deacon
2019-06-24 17:03 ` Will Deacon
2019-06-24 17:03 ` Will Deacon
2019-06-25 7:04 ` Vivek Gautam
2019-06-25 7:04 ` Vivek Gautam
2019-06-25 7:04 ` Vivek Gautam
2019-06-25 13:39 ` Will Deacon
2019-06-25 13:39 ` Will Deacon
2019-06-25 13:39 ` Will Deacon
2019-06-26 6:33 ` Vivek Gautam
2019-06-26 6:33 ` Vivek Gautam
2019-06-26 6:33 ` Vivek Gautam
2019-06-26 14:48 ` Will Deacon
2019-06-26 14:48 ` Will Deacon
2019-06-26 14:48 ` Will Deacon
2019-06-27 7:05 ` Vivek Gautam
2019-06-27 7:05 ` Vivek Gautam
2019-06-27 7:05 ` Vivek Gautam
2019-06-14 13:15 ` Marc Gonzalez
2019-06-14 13:15 ` Marc Gonzalez
2019-06-17 9:50 ` Vivek Gautam
2019-06-17 9:50 ` Vivek Gautam
2019-06-17 10:48 ` Marc Gonzalez
2019-06-17 10:48 ` Marc Gonzalez
2019-06-12 7:15 ` [PATCH v3 4/4] arm64: dts/sdm845: Enable FW implemented safe sequence handler on MTP Vivek Gautam
2019-06-12 7:15 ` Vivek Gautam
2019-06-14 4:06 ` Bjorn Andersson
2019-06-14 4:06 ` Bjorn Andersson
2019-06-14 4:06 ` Bjorn Andersson
2019-06-14 9:01 ` Vivek Gautam
2019-06-14 9:01 ` Vivek Gautam
2019-06-14 9:01 ` Vivek Gautam
2019-08-05 22:26 ` Bjorn Andersson [this message]
2019-08-05 22:26 ` Bjorn Andersson
2019-08-05 22:26 ` Bjorn Andersson
2019-08-11 16:08 ` Vivek Gautam
2019-08-11 16:08 ` Vivek Gautam
2019-08-11 16:08 ` Vivek Gautam
2019-08-11 19:01 ` Bjorn Andersson
2019-08-11 19:01 ` Bjorn Andersson
2019-08-11 19:01 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190805222627.GA2634@builder \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=iommu@lists.linux-foundation.org \
--cc=joro@8bytes.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=robin.murphy@arm.com \
--cc=vivek.gautam@codeaurora.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.