* [PATCH] PCI: pci-hyperv: fix build errors on non-SYSFS config
@ 2019-07-12 15:53 Randy Dunlap
2019-07-12 16:04 ` Haiyang Zhang
2019-08-15 10:47 ` Lorenzo Pieralisi
0 siblings, 2 replies; 11+ messages in thread
From: Randy Dunlap @ 2019-07-12 15:53 UTC (permalink / raw)
To: linux-pci, LKML
Cc: Matthew Wilcox, Jake Oshins, K. Y. Srinivasan, Haiyang Zhang,
Stephen Hemminger, Stephen Hemminger, Sasha Levin, Bjorn Helgaas,
Dexuan Cui
From: Randy Dunlap <rdunlap@infradead.org>
Fix build errors when building almost-allmodconfig but with SYSFS
not set (not enabled). Fixes these build errors:
ERROR: "pci_destroy_slot" [drivers/pci/controller/pci-hyperv.ko] undefined!
ERROR: "pci_create_slot" [drivers/pci/controller/pci-hyperv.ko] undefined!
drivers/pci/slot.o is only built when SYSFS is enabled, so
pci-hyperv.o has an implicit dependency on SYSFS.
Make that explicit.
Also, depending on X86 && X86_64 is not needed, so just change that
to depend on X86_64.
Fixes: a15f2c08c708 ("PCI: hv: support reporting serial number as slot
information")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jake Oshins <jakeo@microsoft.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-hyperv@vger.kernel.org
Cc: Dexuan Cui <decui@microsoft.com>
---
v3: corrected Fixes: tag [Dexuan Cui <decui@microsoft.com>]
This is the Microsoft-preferred version of the patch.
drivers/pci/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- lnx-52.orig/drivers/pci/Kconfig
+++ lnx-52/drivers/pci/Kconfig
@@ -181,7 +181,7 @@ config PCI_LABEL
config PCI_HYPERV
tristate "Hyper-V PCI Frontend"
- depends on X86 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && X86_64
+ depends on X86_64 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && SYSFS
help
The PCI device frontend driver allows the kernel to import arbitrary
PCI devices from a PCI backend to support PCI driver domains.
^ permalink raw reply [flat|nested] 11+ messages in thread
* RE: [PATCH] PCI: pci-hyperv: fix build errors on non-SYSFS config
2019-07-12 15:53 [PATCH] PCI: pci-hyperv: fix build errors on non-SYSFS config Randy Dunlap
@ 2019-07-12 16:04 ` Haiyang Zhang
2019-07-13 15:03 ` Sasha Levin
2019-08-15 10:47 ` Lorenzo Pieralisi
1 sibling, 1 reply; 11+ messages in thread
From: Haiyang Zhang @ 2019-07-12 16:04 UTC (permalink / raw)
To: Randy Dunlap, linux-pci, LKML
Cc: Matthew Wilcox, Jake Oshins, KY Srinivasan, Stephen Hemminger,
Stephen Hemminger, Sasha Levin, Bjorn Helgaas, Dexuan Cui
> -----Original Message-----
> From: Randy Dunlap <rdunlap@infradead.org>
> Sent: Friday, July 12, 2019 11:53 AM
> To: linux-pci <linux-pci@vger.kernel.org>; LKML <linux-
> kernel@vger.kernel.org>
> Cc: Matthew Wilcox <willy@infradead.org>; Jake Oshins
> <jakeo@microsoft.com>; KY Srinivasan <kys@microsoft.com>; Haiyang
> Zhang <haiyangz@microsoft.com>; Stephen Hemminger
> <sthemmin@microsoft.com>; Stephen Hemminger
> <stephen@networkplumber.org>; Sasha Levin <sashal@kernel.org>; Bjorn
> Helgaas <bhelgaas@google.com>; Dexuan Cui <decui@microsoft.com>
> Subject: [PATCH] PCI: pci-hyperv: fix build errors on non-SYSFS config
>
> From: Randy Dunlap <rdunlap@infradead.org>
>
> Fix build errors when building almost-allmodconfig but with SYSFS
> not set (not enabled). Fixes these build errors:
>
> ERROR: "pci_destroy_slot" [drivers/pci/controller/pci-hyperv.ko] undefined!
> ERROR: "pci_create_slot" [drivers/pci/controller/pci-hyperv.ko] undefined!
>
> drivers/pci/slot.o is only built when SYSFS is enabled, so
> pci-hyperv.o has an implicit dependency on SYSFS.
> Make that explicit.
>
> Also, depending on X86 && X86_64 is not needed, so just change that
> to depend on X86_64.
>
> Fixes: a15f2c08c708 ("PCI: hv: support reporting serial number as slot
> information")
>
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Matthew Wilcox <willy@infradead.org>
> Cc: Jake Oshins <jakeo@microsoft.com>
> Cc: "K. Y. Srinivasan" <kys@microsoft.com>
> Cc: Haiyang Zhang <haiyangz@microsoft.com>
> Cc: Stephen Hemminger <sthemmin@microsoft.com>
> Cc: Stephen Hemminger <stephen@networkplumber.org>
> Cc: Sasha Levin <sashal@kernel.org>
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> Cc: linux-pci@vger.kernel.org
> Cc: linux-hyperv@vger.kernel.org
> Cc: Dexuan Cui <decui@microsoft.com>
> ---
> v3: corrected Fixes: tag [Dexuan Cui <decui@microsoft.com>]
> This is the Microsoft-preferred version of the patch.
>
> drivers/pci/Kconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> --- lnx-52.orig/drivers/pci/Kconfig
> +++ lnx-52/drivers/pci/Kconfig
> @@ -181,7 +181,7 @@ config PCI_LABEL
>
> config PCI_HYPERV
> tristate "Hyper-V PCI Frontend"
> - depends on X86 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN
> && X86_64
> + depends on X86_64 && HYPERV && PCI_MSI &&
> PCI_MSI_IRQ_DOMAIN && SYSFS
> help
> The PCI device frontend driver allows the kernel to import arbitrary
> PCI devices from a PCI backend to support PCI driver domains.
>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] PCI: pci-hyperv: fix build errors on non-SYSFS config
2019-07-12 16:04 ` Haiyang Zhang
@ 2019-07-13 15:03 ` Sasha Levin
2019-07-23 21:21 ` Bjorn Helgaas
0 siblings, 1 reply; 11+ messages in thread
From: Sasha Levin @ 2019-07-13 15:03 UTC (permalink / raw)
To: Haiyang Zhang
Cc: Randy Dunlap, linux-pci, LKML, Matthew Wilcox, Jake Oshins,
KY Srinivasan, Stephen Hemminger, Stephen Hemminger,
Bjorn Helgaas, Dexuan Cui
On Fri, Jul 12, 2019 at 04:04:17PM +0000, Haiyang Zhang wrote:
>
>
>> -----Original Message-----
>> From: Randy Dunlap <rdunlap@infradead.org>
>> Sent: Friday, July 12, 2019 11:53 AM
>> To: linux-pci <linux-pci@vger.kernel.org>; LKML <linux-
>> kernel@vger.kernel.org>
>> Cc: Matthew Wilcox <willy@infradead.org>; Jake Oshins
>> <jakeo@microsoft.com>; KY Srinivasan <kys@microsoft.com>; Haiyang
>> Zhang <haiyangz@microsoft.com>; Stephen Hemminger
>> <sthemmin@microsoft.com>; Stephen Hemminger
>> <stephen@networkplumber.org>; Sasha Levin <sashal@kernel.org>; Bjorn
>> Helgaas <bhelgaas@google.com>; Dexuan Cui <decui@microsoft.com>
>> Subject: [PATCH] PCI: pci-hyperv: fix build errors on non-SYSFS config
>>
>> From: Randy Dunlap <rdunlap@infradead.org>
>>
>> Fix build errors when building almost-allmodconfig but with SYSFS
>> not set (not enabled). Fixes these build errors:
>>
>> ERROR: "pci_destroy_slot" [drivers/pci/controller/pci-hyperv.ko] undefined!
>> ERROR: "pci_create_slot" [drivers/pci/controller/pci-hyperv.ko] undefined!
>>
>> drivers/pci/slot.o is only built when SYSFS is enabled, so
>> pci-hyperv.o has an implicit dependency on SYSFS.
>> Make that explicit.
>>
>> Also, depending on X86 && X86_64 is not needed, so just change that
>> to depend on X86_64.
>>
>> Fixes: a15f2c08c708 ("PCI: hv: support reporting serial number as slot
>> information")
>>
>> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
>> Cc: Matthew Wilcox <willy@infradead.org>
>> Cc: Jake Oshins <jakeo@microsoft.com>
>> Cc: "K. Y. Srinivasan" <kys@microsoft.com>
>> Cc: Haiyang Zhang <haiyangz@microsoft.com>
>> Cc: Stephen Hemminger <sthemmin@microsoft.com>
>> Cc: Stephen Hemminger <stephen@networkplumber.org>
>> Cc: Sasha Levin <sashal@kernel.org>
>> Cc: Bjorn Helgaas <bhelgaas@google.com>
>> Cc: linux-pci@vger.kernel.org
>> Cc: linux-hyperv@vger.kernel.org
>> Cc: Dexuan Cui <decui@microsoft.com>
>> ---
>> v3: corrected Fixes: tag [Dexuan Cui <decui@microsoft.com>]
>> This is the Microsoft-preferred version of the patch.
>>
>> drivers/pci/Kconfig | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> --- lnx-52.orig/drivers/pci/Kconfig
>> +++ lnx-52/drivers/pci/Kconfig
>> @@ -181,7 +181,7 @@ config PCI_LABEL
>>
>> config PCI_HYPERV
>> tristate "Hyper-V PCI Frontend"
>> - depends on X86 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN
>> && X86_64
>> + depends on X86_64 && HYPERV && PCI_MSI &&
>> PCI_MSI_IRQ_DOMAIN && SYSFS
>> help
>> The PCI device frontend driver allows the kernel to import arbitrary
>> PCI devices from a PCI backend to support PCI driver domains.
>>
>
>Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Queued up for hyperv-fixes, thank you!
--
Thanks,
Sasha
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] PCI: pci-hyperv: fix build errors on non-SYSFS config
2019-07-13 15:03 ` Sasha Levin
@ 2019-07-23 21:21 ` Bjorn Helgaas
2019-08-07 15:06 ` Lorenzo Pieralisi
2019-08-14 10:14 ` Lorenzo Pieralisi
0 siblings, 2 replies; 11+ messages in thread
From: Bjorn Helgaas @ 2019-07-23 21:21 UTC (permalink / raw)
To: Sasha Levin
Cc: Haiyang Zhang, Randy Dunlap, linux-pci, LKML, Matthew Wilcox,
Jake Oshins, KY Srinivasan, Stephen Hemminger, Stephen Hemminger,
Dexuan Cui
On Sat, Jul 13, 2019 at 11:03:53AM -0400, Sasha Levin wrote:
> On Fri, Jul 12, 2019 at 04:04:17PM +0000, Haiyang Zhang wrote:
> > > -----Original Message-----
> > > From: Randy Dunlap <rdunlap@infradead.org>
> > > Sent: Friday, July 12, 2019 11:53 AM
> > > To: linux-pci <linux-pci@vger.kernel.org>; LKML <linux-
> > > kernel@vger.kernel.org>
> > > Cc: Matthew Wilcox <willy@infradead.org>; Jake Oshins
> > > <jakeo@microsoft.com>; KY Srinivasan <kys@microsoft.com>; Haiyang
> > > Zhang <haiyangz@microsoft.com>; Stephen Hemminger
> > > <sthemmin@microsoft.com>; Stephen Hemminger
> > > <stephen@networkplumber.org>; Sasha Levin <sashal@kernel.org>; Bjorn
> > > Helgaas <bhelgaas@google.com>; Dexuan Cui <decui@microsoft.com>
> > > Subject: [PATCH] PCI: pci-hyperv: fix build errors on non-SYSFS config
Whoever merges this (see below), please update the subject line to
match:
$ git log --oneline drivers/pci/controller/pci-hyperv.c | head -5
4df591b20b80 PCI: hv: Fix a use-after-free bug in hv_eject_device_work()
340d45569940 PCI: hv: Add pci_destroy_slot() in pci_devices_present_work(), if necessary
15becc2b56c6 PCI: hv: Add hv_pci_remove_slots() when we unload the driver
05f151a73ec2 PCI: hv: Fix a memory leak in hv_eject_device_work()
c8ccf7599dda PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset()
> > > From: Randy Dunlap <rdunlap@infradead.org>
> > >
> > > Fix build errors when building almost-allmodconfig but with SYSFS
> > > not set (not enabled). Fixes these build errors:
> > >
> > > ERROR: "pci_destroy_slot" [drivers/pci/controller/pci-hyperv.ko] undefined!
> > > ERROR: "pci_create_slot" [drivers/pci/controller/pci-hyperv.ko] undefined!
> > >
> > > drivers/pci/slot.o is only built when SYSFS is enabled, so
> > > pci-hyperv.o has an implicit dependency on SYSFS.
> > > Make that explicit.
> > >
> > > Also, depending on X86 && X86_64 is not needed, so just change that
> > > to depend on X86_64.
> > >
> > > Fixes: a15f2c08c708 ("PCI: hv: support reporting serial number as slot
> > > information")
> > >
> > > Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> > > Cc: Matthew Wilcox <willy@infradead.org>
> > > Cc: Jake Oshins <jakeo@microsoft.com>
> > > Cc: "K. Y. Srinivasan" <kys@microsoft.com>
> > > Cc: Haiyang Zhang <haiyangz@microsoft.com>
> > > Cc: Stephen Hemminger <sthemmin@microsoft.com>
> > > Cc: Stephen Hemminger <stephen@networkplumber.org>
> > > Cc: Sasha Levin <sashal@kernel.org>
> > > Cc: Bjorn Helgaas <bhelgaas@google.com>
> > > Cc: linux-pci@vger.kernel.org
> > > Cc: linux-hyperv@vger.kernel.org
> > > Cc: Dexuan Cui <decui@microsoft.com>
> > > ---
> > > v3: corrected Fixes: tag [Dexuan Cui <decui@microsoft.com>]
> > > This is the Microsoft-preferred version of the patch.
> > >
> > > drivers/pci/Kconfig | 2 +-
> > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > --- lnx-52.orig/drivers/pci/Kconfig
> > > +++ lnx-52/drivers/pci/Kconfig
> > > @@ -181,7 +181,7 @@ config PCI_LABEL
> > >
> > > config PCI_HYPERV
> > > tristate "Hyper-V PCI Frontend"
> > > - depends on X86 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN
> > > && X86_64
> > > + depends on X86_64 && HYPERV && PCI_MSI &&
> > > PCI_MSI_IRQ_DOMAIN && SYSFS
> > > help
> > > The PCI device frontend driver allows the kernel to import arbitrary
> > > PCI devices from a PCI backend to support PCI driver domains.
> > >
> >
> > Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
>
> Queued up for hyperv-fixes, thank you!
What merge strategy do you envision for this? Previous
drivers/pci/controller/pci-hyperv.c changes have generally been merged
by Lorenzo and incorporated into my PCI tree.
This particular patch doesn't actually touch pci-hyperv.c; it touches
drivers/pci/Kconfig, so should somehow be coordinated with me.
Does this need to be tagged for stable? a15f2c08c708 appeared in
v4.19, so my first guess is that it's not stable material.
Bjorn
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] PCI: pci-hyperv: fix build errors on non-SYSFS config
2019-07-23 21:21 ` Bjorn Helgaas
@ 2019-08-07 15:06 ` Lorenzo Pieralisi
2019-08-08 1:27 ` Sasha Levin
2019-08-14 10:14 ` Lorenzo Pieralisi
1 sibling, 1 reply; 11+ messages in thread
From: Lorenzo Pieralisi @ 2019-08-07 15:06 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: Sasha Levin, Haiyang Zhang, Randy Dunlap, linux-pci, LKML,
Matthew Wilcox, Jake Oshins, KY Srinivasan, Stephen Hemminger,
Stephen Hemminger, Dexuan Cui
On Tue, Jul 23, 2019 at 04:21:07PM -0500, Bjorn Helgaas wrote:
> On Sat, Jul 13, 2019 at 11:03:53AM -0400, Sasha Levin wrote:
> > On Fri, Jul 12, 2019 at 04:04:17PM +0000, Haiyang Zhang wrote:
> > > > -----Original Message-----
> > > > From: Randy Dunlap <rdunlap@infradead.org>
> > > > Sent: Friday, July 12, 2019 11:53 AM
> > > > To: linux-pci <linux-pci@vger.kernel.org>; LKML <linux-
> > > > kernel@vger.kernel.org>
> > > > Cc: Matthew Wilcox <willy@infradead.org>; Jake Oshins
> > > > <jakeo@microsoft.com>; KY Srinivasan <kys@microsoft.com>; Haiyang
> > > > Zhang <haiyangz@microsoft.com>; Stephen Hemminger
> > > > <sthemmin@microsoft.com>; Stephen Hemminger
> > > > <stephen@networkplumber.org>; Sasha Levin <sashal@kernel.org>; Bjorn
> > > > Helgaas <bhelgaas@google.com>; Dexuan Cui <decui@microsoft.com>
> > > > Subject: [PATCH] PCI: pci-hyperv: fix build errors on non-SYSFS config
>
> Whoever merges this (see below), please update the subject line to
> match:
>
> $ git log --oneline drivers/pci/controller/pci-hyperv.c | head -5
> 4df591b20b80 PCI: hv: Fix a use-after-free bug in hv_eject_device_work()
> 340d45569940 PCI: hv: Add pci_destroy_slot() in pci_devices_present_work(), if necessary
> 15becc2b56c6 PCI: hv: Add hv_pci_remove_slots() when we unload the driver
> 05f151a73ec2 PCI: hv: Fix a memory leak in hv_eject_device_work()
> c8ccf7599dda PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset()
>
> > > > From: Randy Dunlap <rdunlap@infradead.org>
> > > >
> > > > Fix build errors when building almost-allmodconfig but with SYSFS
> > > > not set (not enabled). Fixes these build errors:
> > > >
> > > > ERROR: "pci_destroy_slot" [drivers/pci/controller/pci-hyperv.ko] undefined!
> > > > ERROR: "pci_create_slot" [drivers/pci/controller/pci-hyperv.ko] undefined!
> > > >
> > > > drivers/pci/slot.o is only built when SYSFS is enabled, so
> > > > pci-hyperv.o has an implicit dependency on SYSFS.
> > > > Make that explicit.
> > > >
> > > > Also, depending on X86 && X86_64 is not needed, so just change that
> > > > to depend on X86_64.
> > > >
> > > > Fixes: a15f2c08c708 ("PCI: hv: support reporting serial number as slot
> > > > information")
> > > >
> > > > Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> > > > Cc: Matthew Wilcox <willy@infradead.org>
> > > > Cc: Jake Oshins <jakeo@microsoft.com>
> > > > Cc: "K. Y. Srinivasan" <kys@microsoft.com>
> > > > Cc: Haiyang Zhang <haiyangz@microsoft.com>
> > > > Cc: Stephen Hemminger <sthemmin@microsoft.com>
> > > > Cc: Stephen Hemminger <stephen@networkplumber.org>
> > > > Cc: Sasha Levin <sashal@kernel.org>
> > > > Cc: Bjorn Helgaas <bhelgaas@google.com>
> > > > Cc: linux-pci@vger.kernel.org
> > > > Cc: linux-hyperv@vger.kernel.org
> > > > Cc: Dexuan Cui <decui@microsoft.com>
> > > > ---
> > > > v3: corrected Fixes: tag [Dexuan Cui <decui@microsoft.com>]
> > > > This is the Microsoft-preferred version of the patch.
> > > >
> > > > drivers/pci/Kconfig | 2 +-
> > > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > > >
> > > > --- lnx-52.orig/drivers/pci/Kconfig
> > > > +++ lnx-52/drivers/pci/Kconfig
> > > > @@ -181,7 +181,7 @@ config PCI_LABEL
> > > >
> > > > config PCI_HYPERV
> > > > tristate "Hyper-V PCI Frontend"
> > > > - depends on X86 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN
> > > > && X86_64
> > > > + depends on X86_64 && HYPERV && PCI_MSI &&
> > > > PCI_MSI_IRQ_DOMAIN && SYSFS
> > > > help
> > > > The PCI device frontend driver allows the kernel to import arbitrary
> > > > PCI devices from a PCI backend to support PCI driver domains.
> > > >
> > >
> > > Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
> >
> > Queued up for hyperv-fixes, thank you!
>
> What merge strategy do you envision for this? Previous
> drivers/pci/controller/pci-hyperv.c changes have generally been merged
> by Lorenzo and incorporated into my PCI tree.
>
> This particular patch doesn't actually touch pci-hyperv.c; it touches
> drivers/pci/Kconfig, so should somehow be coordinated with me.
>
> Does this need to be tagged for stable? a15f2c08c708 appeared in
> v4.19, so my first guess is that it's not stable material.
AFAIC Bjorn's question still stands. Who will pick this patch up ?
Thanks,
Lorenzo
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] PCI: pci-hyperv: fix build errors on non-SYSFS config
2019-08-07 15:06 ` Lorenzo Pieralisi
@ 2019-08-08 1:27 ` Sasha Levin
2019-08-08 10:13 ` Lorenzo Pieralisi
0 siblings, 1 reply; 11+ messages in thread
From: Sasha Levin @ 2019-08-08 1:27 UTC (permalink / raw)
To: Lorenzo Pieralisi
Cc: Bjorn Helgaas, Haiyang Zhang, Randy Dunlap, linux-pci, LKML,
Matthew Wilcox, Jake Oshins, KY Srinivasan, Stephen Hemminger,
Stephen Hemminger, Dexuan Cui
On Wed, Aug 07, 2019 at 04:06:54PM +0100, Lorenzo Pieralisi wrote:
>On Tue, Jul 23, 2019 at 04:21:07PM -0500, Bjorn Helgaas wrote:
>> On Sat, Jul 13, 2019 at 11:03:53AM -0400, Sasha Levin wrote:
>> > Queued up for hyperv-fixes, thank you!
>>
>> What merge strategy do you envision for this? Previous
>> drivers/pci/controller/pci-hyperv.c changes have generally been merged
>> by Lorenzo and incorporated into my PCI tree.
>>
>> This particular patch doesn't actually touch pci-hyperv.c; it touches
>> drivers/pci/Kconfig, so should somehow be coordinated with me.
>>
>> Does this need to be tagged for stable? a15f2c08c708 appeared in
>> v4.19, so my first guess is that it's not stable material.
>
>AFAIC Bjorn's question still stands. Who will pick this patch up ?
Would it be easier if I just ignored Hyper-V PCI patches?
--
Thanks,
Sasha
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] PCI: pci-hyperv: fix build errors on non-SYSFS config
2019-08-08 1:27 ` Sasha Levin
@ 2019-08-08 10:13 ` Lorenzo Pieralisi
0 siblings, 0 replies; 11+ messages in thread
From: Lorenzo Pieralisi @ 2019-08-08 10:13 UTC (permalink / raw)
To: Sasha Levin
Cc: Bjorn Helgaas, Haiyang Zhang, Randy Dunlap, linux-pci, LKML,
Matthew Wilcox, Jake Oshins, KY Srinivasan, Stephen Hemminger,
Stephen Hemminger, Dexuan Cui
On Wed, Aug 07, 2019 at 09:27:45PM -0400, Sasha Levin wrote:
> On Wed, Aug 07, 2019 at 04:06:54PM +0100, Lorenzo Pieralisi wrote:
> > On Tue, Jul 23, 2019 at 04:21:07PM -0500, Bjorn Helgaas wrote:
> > > On Sat, Jul 13, 2019 at 11:03:53AM -0400, Sasha Levin wrote:
> > > > Queued up for hyperv-fixes, thank you!
> > >
> > > What merge strategy do you envision for this? Previous
> > > drivers/pci/controller/pci-hyperv.c changes have generally been merged
> > > by Lorenzo and incorporated into my PCI tree.
> > >
> > > This particular patch doesn't actually touch pci-hyperv.c; it touches
> > > drivers/pci/Kconfig, so should somehow be coordinated with me.
> > >
> > > Does this need to be tagged for stable? a15f2c08c708 appeared in
> > > v4.19, so my first guess is that it's not stable material.
> >
> > AFAIC Bjorn's question still stands. Who will pick this patch up ?
>
> Would it be easier if I just ignored Hyper-V PCI patches?
I think it probably would, yes. Actually this patch does not even
fall within "Hyper-V CORE AND DRIVERS" maintainers entry.
As for drivers/pci/controller/pci-hyperv.c, for urgent fixes
I understand it is easier for you to pull them I would still ask
you please to sync with me before pulling them.
Thanks,
Lorenzo
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] PCI: pci-hyperv: fix build errors on non-SYSFS config
2019-07-23 21:21 ` Bjorn Helgaas
2019-08-07 15:06 ` Lorenzo Pieralisi
@ 2019-08-14 10:14 ` Lorenzo Pieralisi
2019-08-14 15:58 ` Bjorn Helgaas
1 sibling, 1 reply; 11+ messages in thread
From: Lorenzo Pieralisi @ 2019-08-14 10:14 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: Sasha Levin, Haiyang Zhang, Randy Dunlap, linux-pci, LKML,
Matthew Wilcox, Jake Oshins, KY Srinivasan, Stephen Hemminger,
Stephen Hemminger, Dexuan Cui
On Tue, Jul 23, 2019 at 04:21:07PM -0500, Bjorn Helgaas wrote:
> On Sat, Jul 13, 2019 at 11:03:53AM -0400, Sasha Levin wrote:
[...]
> > > > v3: corrected Fixes: tag [Dexuan Cui <decui@microsoft.com>]
> > > > This is the Microsoft-preferred version of the patch.
> > > >
> > > > drivers/pci/Kconfig | 2 +-
> > > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > > >
> > > > --- lnx-52.orig/drivers/pci/Kconfig
> > > > +++ lnx-52/drivers/pci/Kconfig
> > > > @@ -181,7 +181,7 @@ config PCI_LABEL
> > > >
> > > > config PCI_HYPERV
> > > > tristate "Hyper-V PCI Frontend"
> > > > - depends on X86 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN
> > > > && X86_64
> > > > + depends on X86_64 && HYPERV && PCI_MSI &&
> > > > PCI_MSI_IRQ_DOMAIN && SYSFS
> > > > help
> > > > The PCI device frontend driver allows the kernel to import arbitrary
> > > > PCI devices from a PCI backend to support PCI driver domains.
> > > >
> > >
> > > Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
> >
> > Queued up for hyperv-fixes, thank you!
>
> What merge strategy do you envision for this? Previous
> drivers/pci/controller/pci-hyperv.c changes have generally been merged
> by Lorenzo and incorporated into my PCI tree.
>
> This particular patch doesn't actually touch pci-hyperv.c; it touches
> drivers/pci/Kconfig, so should somehow be coordinated with me.
Bjorn please let me know if you can pick this up or I should, thanks.
Lorenzo
> Does this need to be tagged for stable? a15f2c08c708 appeared in
> v4.19, so my first guess is that it's not stable material.
>
> Bjorn
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] PCI: pci-hyperv: fix build errors on non-SYSFS config
2019-08-14 10:14 ` Lorenzo Pieralisi
@ 2019-08-14 15:58 ` Bjorn Helgaas
0 siblings, 0 replies; 11+ messages in thread
From: Bjorn Helgaas @ 2019-08-14 15:58 UTC (permalink / raw)
To: Lorenzo Pieralisi
Cc: Sasha Levin, Haiyang Zhang, Randy Dunlap, linux-pci, LKML,
Matthew Wilcox, Jake Oshins, KY Srinivasan, Stephen Hemminger,
Stephen Hemminger, Dexuan Cui
On Wed, Aug 14, 2019 at 11:14:09AM +0100, Lorenzo Pieralisi wrote:
> On Tue, Jul 23, 2019 at 04:21:07PM -0500, Bjorn Helgaas wrote:
> > On Sat, Jul 13, 2019 at 11:03:53AM -0400, Sasha Levin wrote:
>
> [...]
>
> > > > > v3: corrected Fixes: tag [Dexuan Cui <decui@microsoft.com>]
> > > > > This is the Microsoft-preferred version of the patch.
> > > > >
> > > > > drivers/pci/Kconfig | 2 +-
> > > > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > > > >
> > > > > --- lnx-52.orig/drivers/pci/Kconfig
> > > > > +++ lnx-52/drivers/pci/Kconfig
> > > > > @@ -181,7 +181,7 @@ config PCI_LABEL
> > > > >
> > > > > config PCI_HYPERV
> > > > > tristate "Hyper-V PCI Frontend"
> > > > > - depends on X86 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN
> > > > > && X86_64
> > > > > + depends on X86_64 && HYPERV && PCI_MSI &&
> > > > > PCI_MSI_IRQ_DOMAIN && SYSFS
> > > > > help
> > > > > The PCI device frontend driver allows the kernel to import arbitrary
> > > > > PCI devices from a PCI backend to support PCI driver domains.
> > > > >
> > > >
> > > > Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
> > >
> > > Queued up for hyperv-fixes, thank you!
> >
> > What merge strategy do you envision for this? Previous
> > drivers/pci/controller/pci-hyperv.c changes have generally been merged
> > by Lorenzo and incorporated into my PCI tree.
> >
> > This particular patch doesn't actually touch pci-hyperv.c; it touches
> > drivers/pci/Kconfig, so should somehow be coordinated with me.
>
> Bjorn please let me know if you can pick this up or I should, thanks.
Would you mind picking it up? Then we can sort of keep all the
Hyper-V-related changes together.
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] PCI: pci-hyperv: fix build errors on non-SYSFS config
2019-07-12 15:53 [PATCH] PCI: pci-hyperv: fix build errors on non-SYSFS config Randy Dunlap
2019-07-12 16:04 ` Haiyang Zhang
@ 2019-08-15 10:47 ` Lorenzo Pieralisi
2019-08-15 15:14 ` Randy Dunlap
1 sibling, 1 reply; 11+ messages in thread
From: Lorenzo Pieralisi @ 2019-08-15 10:47 UTC (permalink / raw)
To: Randy Dunlap
Cc: linux-pci, LKML, Matthew Wilcox, Jake Oshins, K. Y. Srinivasan,
Haiyang Zhang, Stephen Hemminger, Stephen Hemminger, Sasha Levin,
Bjorn Helgaas, Dexuan Cui
On Fri, Jul 12, 2019 at 08:53:19AM -0700, Randy Dunlap wrote:
> From: Randy Dunlap <rdunlap@infradead.org>
>
> Fix build errors when building almost-allmodconfig but with SYSFS
> not set (not enabled). Fixes these build errors:
>
> ERROR: "pci_destroy_slot" [drivers/pci/controller/pci-hyperv.ko] undefined!
> ERROR: "pci_create_slot" [drivers/pci/controller/pci-hyperv.ko] undefined!
>
> drivers/pci/slot.o is only built when SYSFS is enabled, so
> pci-hyperv.o has an implicit dependency on SYSFS.
> Make that explicit.
>
> Also, depending on X86 && X86_64 is not needed, so just change that
> to depend on X86_64.
>
> Fixes: a15f2c08c708 ("PCI: hv: support reporting serial number as slot
> information")
Fixed line break on Fixes tag, FYI.
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Matthew Wilcox <willy@infradead.org>
> Cc: Jake Oshins <jakeo@microsoft.com>
> Cc: "K. Y. Srinivasan" <kys@microsoft.com>
> Cc: Haiyang Zhang <haiyangz@microsoft.com>
> Cc: Stephen Hemminger <sthemmin@microsoft.com>
> Cc: Stephen Hemminger <stephen@networkplumber.org>
> Cc: Sasha Levin <sashal@kernel.org>
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> Cc: linux-pci@vger.kernel.org
> Cc: linux-hyperv@vger.kernel.org
> Cc: Dexuan Cui <decui@microsoft.com>
> ---
> v3: corrected Fixes: tag [Dexuan Cui <decui@microsoft.com>]
> This is the Microsoft-preferred version of the patch.
>
> drivers/pci/Kconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Applied to pci/hv for v5.4.
Thanks,
Lorenzo
> --- lnx-52.orig/drivers/pci/Kconfig
> +++ lnx-52/drivers/pci/Kconfig
> @@ -181,7 +181,7 @@ config PCI_LABEL
>
> config PCI_HYPERV
> tristate "Hyper-V PCI Frontend"
> - depends on X86 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && X86_64
> + depends on X86_64 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && SYSFS
> help
> The PCI device frontend driver allows the kernel to import arbitrary
> PCI devices from a PCI backend to support PCI driver domains.
>
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] PCI: pci-hyperv: fix build errors on non-SYSFS config
2019-08-15 10:47 ` Lorenzo Pieralisi
@ 2019-08-15 15:14 ` Randy Dunlap
0 siblings, 0 replies; 11+ messages in thread
From: Randy Dunlap @ 2019-08-15 15:14 UTC (permalink / raw)
To: Lorenzo Pieralisi
Cc: linux-pci, LKML, Matthew Wilcox, Jake Oshins, K. Y. Srinivasan,
Haiyang Zhang, Stephen Hemminger, Stephen Hemminger, Sasha Levin,
Bjorn Helgaas, Dexuan Cui
On 8/15/19 3:47 AM, Lorenzo Pieralisi wrote:
> On Fri, Jul 12, 2019 at 08:53:19AM -0700, Randy Dunlap wrote:
>> From: Randy Dunlap <rdunlap@infradead.org>
>>
>> Fix build errors when building almost-allmodconfig but with SYSFS
>> not set (not enabled). Fixes these build errors:
>>
>> ERROR: "pci_destroy_slot" [drivers/pci/controller/pci-hyperv.ko] undefined!
>> ERROR: "pci_create_slot" [drivers/pci/controller/pci-hyperv.ko] undefined!
>>
>> drivers/pci/slot.o is only built when SYSFS is enabled, so
>> pci-hyperv.o has an implicit dependency on SYSFS.
>> Make that explicit.
>>
>> Also, depending on X86 && X86_64 is not needed, so just change that
>> to depend on X86_64.
>>
>> Fixes: a15f2c08c708 ("PCI: hv: support reporting serial number as slot
>> information")
>
> Fixed line break on Fixes tag, FYI.
Thanks.
>
>> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
>> Cc: Matthew Wilcox <willy@infradead.org>
>> Cc: Jake Oshins <jakeo@microsoft.com>
>> Cc: "K. Y. Srinivasan" <kys@microsoft.com>
>> Cc: Haiyang Zhang <haiyangz@microsoft.com>
>> Cc: Stephen Hemminger <sthemmin@microsoft.com>
>> Cc: Stephen Hemminger <stephen@networkplumber.org>
>> Cc: Sasha Levin <sashal@kernel.org>
>> Cc: Bjorn Helgaas <bhelgaas@google.com>
>> Cc: linux-pci@vger.kernel.org
>> Cc: linux-hyperv@vger.kernel.org
>> Cc: Dexuan Cui <decui@microsoft.com>
>> ---
>> v3: corrected Fixes: tag [Dexuan Cui <decui@microsoft.com>]
>> This is the Microsoft-preferred version of the patch.
>>
>> drivers/pci/Kconfig | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> Applied to pci/hv for v5.4.
>
> Thanks,
> Lorenzo
>
>> --- lnx-52.orig/drivers/pci/Kconfig
>> +++ lnx-52/drivers/pci/Kconfig
>> @@ -181,7 +181,7 @@ config PCI_LABEL
>>
>> config PCI_HYPERV
>> tristate "Hyper-V PCI Frontend"
>> - depends on X86 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && X86_64
>> + depends on X86_64 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && SYSFS
>> help
>> The PCI device frontend driver allows the kernel to import arbitrary
>> PCI devices from a PCI backend to support PCI driver domains.
>>
>>
--
~Randy
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2019-08-15 15:14 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-12 15:53 [PATCH] PCI: pci-hyperv: fix build errors on non-SYSFS config Randy Dunlap
2019-07-12 16:04 ` Haiyang Zhang
2019-07-13 15:03 ` Sasha Levin
2019-07-23 21:21 ` Bjorn Helgaas
2019-08-07 15:06 ` Lorenzo Pieralisi
2019-08-08 1:27 ` Sasha Levin
2019-08-08 10:13 ` Lorenzo Pieralisi
2019-08-14 10:14 ` Lorenzo Pieralisi
2019-08-14 15:58 ` Bjorn Helgaas
2019-08-15 10:47 ` Lorenzo Pieralisi
2019-08-15 15:14 ` Randy Dunlap
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.